Os autores gostaria de reconhecer Vanderbilt University e o Instituto de biologia química para apoio financeiro. Sr. Berkley Ellis e Prof John McLean são reconhecidos pela análise espectral de massa de alta resolução.

1. o representante microondas-assistida Denitration
<ol><li>Coloque o éster de nitrato azido (1.0 equiv., 0,2 mmol) em um frasco de reação de microondas de 8 mL. A escala da reação pode ser aumentada para várias mmol sem qualquer efeito adverso sobre o progresso da reação.</li>
	<li>Dissolva o éster de azido-nitrato em 20% aquosa de acetona (0,1 M, 2,0 mL). Adicione piridina (5,0 equiv, 0,08 mL, 1,0 mmol) para o recipiente de reação. Tampa do frasco de irradiação de microondas e coloque o recipiente de reação em uma cavidade do reator de microondas.</li>
	<li>Irradiar a solução a 120 ° C por 15 min com agitação e com um tempo de preensão fixo. O tempo de espera representa quanto tempo a irradiação ocorrerá no designado de temperatura e pressão resultante. Aqueça todas as reacções à temperatura relatada em um período de subida de 2 minutos. Monitore a temperatura por um sensor builtin IR.</li>
	<li>Depois de 15 min, analise a mistura de reação usando cromatografia de camada fina (TLC) para confirmar o consumo das matérias-primas. Use 1:1 acetato de etila/hexanos como eluente.<ol>
<li>Visualize o prato de TLC com mancha de molybate de amônio cério. A Rf de reagente e do produto irá variar, mas o álcool redução é geralmente de 0,05 a 0,1 inferior Rf do que o reagente.</li>
	</ol>
</li>
</ol>2. formação da trichloroacetimidate
<ol><li>Após completo consumo das matérias-primas, evapore o solvente para um volume reduzido usando uma companhia aérea. Em seguida, diluir com (diclorometano) CH2Cl2 (1,0 mL) e use uma seringa para remover a camada de água. Uma vez que a camada de água é removido, arrefecer a mistura de reação de 0 ° C, utilizando um banho de gelo.</li>
	<li>Em seguida, adicione DBU (10 eq, 0,3 mL, 1,9 mmol) e 2, 2,2-trichloroacetonitrile (50 eq, 1,0 mL, 10 mmol) para o recipiente de reação. Ambos os reagentes são adicionados em excesso e um mínimo de 1 equivalente de base e 1 equivalente de 2, 2,2-trichloroacetonitrile são necessários.</li>
	<li>Permita que a mistura de reação a se mexer enquanto o aquecimento até à temperatura ambiente. Monitore a reação do TLC para confirmar o consumo das matérias-primas.<ol>
<li>Use 1:1 acetato de etila/hexanos como eluente. Visualize o prato de TLC com mancha de molybate de amônio cério. A Rf de reagente e do produto irá variar.</li>
	</ol>
</li>
	<li>Após o consumo total do material começar, transfira a mistura de reação para um frasco de recuperação e concentrar-se a mistura no vácuo a 30 ° C. Evaporação do solvente fornecerá um bruto amarelo pálido ao óleo marrom.</li>
	<li>Purifica o produto bruto por cromatografia em coluna de sílica gel com uma coluna de cromatografia de 1,5 cm e 1:4. acetato de etila/hexanos como eluente. A forma física do imidate irá variar de molécula a molécula.</li>
</ol><img alt="Figure 1" class="xfigimg" src="/files/ftp_upload/56610/56610fig1v3.jpg"> Figura 1. Exemplos representativos de um pot-conversão dos ésteres 2-azido-1-nitrato ao 2-azido-1-trichloroimidates. <a href="//cloudflare.jove.com/files/ftp_upload/56610/56610fig1v3large.jpg" target="_blank">Clique aqui para ver uma versão maior desta figura.</a>

<ol>
	<li>Nicolaou, K. C., Mitchell, H. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Adventures+in+Carbohydrate+Chemistry:+New+Synthetic+Technologies,+Chemical+Synthesis,+Molecular+Design,+and+Chemical+Biology+A+list+of+abbreviations+can+be+found+at+the+end+of+this+article.+Telemachos+Charalambous+was+an+inspiring+teacher+at+the+Pancyprian+Gymnasium,+Nicosia,+Cyprus.">Adventures in Carbohydrate Chemistry: New Synthetic Technologies, Chemical Synthesis, Molecular Design, and Chemical Biology A list of abbreviations can be found at the end of this article. Telemachos Charalambous was an inspiring teacher at the Pancyprian Gymnasium, Nicosia, Cyprus.</a> Angew. Chem. Int. Ed. Engl. 40 (9), 1576-1624 (2001).</li><li>Danishefsky, S. J., Allen, J. R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=From+the+laboratory+to+the+clinic:+A+retrospective+on+fully+synthetic+carbohydrate-based+anticancer+vaccines.">From the laboratory to the clinic: A retrospective on fully synthetic carbohydrate-based anticancer vaccines.</a> Angew. Chem. Int. Ed. Engl. 39 (5), 836-863 (2000).</li><li>Nicolaou, K. C., Hale, C. R. H., Nilewski, C., Ioannidou, H. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Constructing+molecular+complexity+and+diversity:+total+synthesis+of+natural+products+of+biological+and+medicinal+importance.">Constructing molecular complexity and diversity: total synthesis of natural products of biological and medicinal importance.</a> Chemical Society Reviews. 41 (15), 5185-5238 (2012).</li><li>Zhu, X., Schmidt, R. R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=New+principles+for+glycoside-bond+formation.">New principles for glycoside-bond formation.</a> Angew. Chem. Int. Ed. Engl. 48 (11), 1900-1934 (2009).</li><li>Danishefsky, S. J., Bilodeau, M. T. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Glycals+in+organic+synthesis:+The+evolution+of+comprehensive+strategies+for+the+assembly+of+oligosaccharides+and+glycoconjugates+of+biological+consequence.">Glycals in organic synthesis: The evolution of comprehensive strategies for the assembly of oligosaccharides and glycoconjugates of biological consequence.</a> Angew. Chem. Int. Ed. Engl. 35 (13-14), 1380-1419 (1996).</li><li>Bongat, A. F., Demchenko, A. V. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Recent+trends+in+the+synthesis+of+O-glycosides+of+2-amino-2-deoxysugars.">Recent trends in the synthesis of O-glycosides of 2-amino-2-deoxysugars.</a> Carbohydr. Res. 342 (3-4), 374-406 (2007).</li><li>Feizi, T., Fazio, F., Chai, W. C., Wong, C. H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Carbohydrate+microarrays+-+a+new+set+of+technologies+at+the+frontiers+of+glycomics.">Carbohydrate microarrays - a new set of technologies at the frontiers of glycomics.</a> Curr. Opin. Struct. Biol. 13 (5), 637-645 (2003).</li><li>Palmacci, E. R., Plante, O. J., Seeberger, P. H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Oligosaccharide+synthesis+in+solution+and+on+solid+support+with+glycosyl+phosphates.">Oligosaccharide synthesis in solution and on solid support with glycosyl phosphates.</a> Eur. J. Org. Chem. (4), 595-606 (2002).</li><li>Stallforth, P., Lepenies, B., Adibekian, A., Seeberger, P. H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=2009+Claude+S.+Hudson+Award+in+Carbohydrate+Chemistry.+Carbohydrates:+a+frontier+in+medicinal+chemistry.">2009 Claude S. Hudson Award in Carbohydrate Chemistry. Carbohydrates: a frontier in medicinal chemistry.</a> J. Med. Chem. 52 (18), 5561-5577 (2009).</li><li>Danishefsky, S. J., Mcclure, K. F., Randolph, J. T., Ruggeri, R. B. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+Strategy+for+the+Solid-Phase+Synthesis+of+Oligosaccharides.">A Strategy for the Solid-Phase Synthesis of Oligosaccharides.</a> Science. 260 (5112), 1307-1309 (1993).</li><li>Demchenko, A. V. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Stereoselective+chemical+1,2-cis+O-glycosylation:+From+'sugar+ray'+to+modern+techniques+of+the+21st+century.">Stereoselective chemical 1,2-cis O-glycosylation: From 'sugar ray' to modern techniques of the 21st century.</a> Synlett. (9), 1225-1240 (2003).</li><li>Fraserreid, B., Wu, Z. F., Udodong, U. E., Ottosson, H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Armed-Disarmed+Effects+in+Glycosyl+Donors+-+Rationalization+and+Sidetracking.">Armed-Disarmed Effects in Glycosyl Donors - Rationalization and Sidetracking.</a> J. Org. Chem. 55 (25), 6068-6070 (1990).</li><li>Bohe, L., Crich, D. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+propos+of+glycosyl+cations+and+the+mechanism+of+chemical+glycosylation;+the+current+state+of+the+art.">A propos of glycosyl cations and the mechanism of chemical glycosylation; the current state of the art.</a> Carbohydr. Res. 403, 48-59 (2015).</li><li>Toshima, K., Tatsuta, K. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Recent+Progress+in+O-Glycosylation+Methods+and+Its+Application+to+Natural-Products+Synthesis.">Recent Progress in O-Glycosylation Methods and Its Application to Natural-Products Synthesis.</a> Chem. Rev. 93 (4), 1503-1531 (1993).</li><li>Koenigs, W., Knorr, E. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Ueber+einige+Derivate+des+Traubenzuckers+und+der+Galactose.">Ueber einige Derivate des Traubenzuckers und der Galactose.</a> Chem. Ber. 34 (1), 957-981 (1901).</li><li>Mukaiyama, T., Murai, Y., Shoda, S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=An+Efficient+Method+for+Glucosylation+of+Hydroxy+Compounds+Using+Glucopyranosyl+Fluoride.">An Efficient Method for Glucosylation of Hydroxy Compounds Using Glucopyranosyl Fluoride.</a> Chem. Lett. (3), 431-432 (1981).</li><li>Meloncelli, P. J., Martin, A. D., Lowary, T. L. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Glycosyl+iodides.+History+and+recent+advances.">Glycosyl iodides. History and recent advances.</a> Carbohydrate Research. 344 (9), 1110-1122 (2009).</li><li>Lian, G., Zhang, X., Yu, B. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Thioglycosides+in+carbohydrate+research.">Thioglycosides in carbohydrate research.</a> Carbohydr. Res. 403, 13-22 (2015).</li><li>Schmidt, R. R., Kinzy, W. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Anomeric-Oxygen+Activation+for+Glycoside+Synthesis+-+the+Trichloroacetimidate+Method.">Anomeric-Oxygen Activation for Glycoside Synthesis - the Trichloroacetimidate Method.</a> Advances in Carbohydrate Chemistry and Biochemistry. 50, 21-123 (1994).</li><li>Schmidt, R. R., Toepfer, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Glycosylation+with+highly+reactive+glycosyl+donors:+efficiency+of+the+inverse+procedure.">Glycosylation with highly reactive glycosyl donors: efficiency of the inverse procedure.</a> Tetrahedron Lett. 32 (28), 3353-3356 (1991).</li><li>Keith, D. J., Townsend, S. D. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Direct,+microwave-assisted+substitution+of+anomeric+nitrate-esters.">Direct, microwave-assisted substitution of anomeric nitrate-esters.</a> Carbohydr. Res. 442, 20-24 (2017).</li><li>Bukowski, R., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Synthesis+and+Conformational+Analysis+of+the+T-Antigen+Disaccharide(B-D-Gal-(1->3)-a-D-GalNAc-OMe).">Synthesis and Conformational Analysis of the T-Antigen Disaccharide(B-D-Gal-(1->3)-a-D-GalNAc-OMe).</a> Eur. J. Org. Chem. 14, 2697-2705 (2001).</li></ol>

Os autores têm sem interesses financeiros concorrentes.

O protocolo descrito neste tutorial fornece um método para converter nitrato ésteres para funcionalidade útil, reativa. Em um sentido mais amplo, empregar um reator de microondas para completar manobras específicas ao longo de uma síntese do hidrato de carbono tem o potencial para fazer transformações difícil facile e rotina. Nosso objetivo neste tutorial é demonstrar como lidar com os hidratos de carbono no contexto da irradiação de microondas.
No caso da reação do pai, esforços...

Devido sua onipresença em biologia molecular, hidratos de carbono têm sido alvos de longa data por síntese química. 1 , 2 , 3 no núcleo de qualquer campanha sintético bem sucedida é a implantação correta de reacções de glicosilação para construir a cadeia de oligossacarídeo. 4 , 5 , 6 , 7 , 8 , 9 , 10 , 11 , 12 não surpreendentemente, há um grande número de métodos para instalar glucosídicas. 13 , 14 Koenigs-Knorr o método é um dos procedimentos mais antigos conhecidos e envolve um glycosyl cloreto ou brometo de acoplamento com um componente alcoólica, geralmente sob ativação de metais pesados (mercúrio ou prata). 15 glycosyl relacionados fluoretos foram introduzidos como doadores em 1981 pelo grupo Mukaiyama e encontraram aplicação generalizada devido à sua maior estabilidade térmica e química. 16 na extremidade oposta do espectro de reatividade são glycosyl iodetos, que são muito mais reativos que os outros haletos. Aumento da reatividade é acompanhada de aumento stereocontrol, particularmente quando formando oligossacarídeos ligados α. 17 além de "haloglycosides", thioglycosides ter encontrado ampla utilidade, em parte, devido a sua facilidade de formação, estabilidade a uma multiplicidade de condições da reação e ativação com reagentes eletrofílicos. 18
Os métodos descritos acima o foco sobre a conversão de um álcool anomérico para um "não-oxigênio" que contém, latente, deixando o grupo que é ativado e, finalmente, deslocado por um álcool de uma molécula aceitadora. Ativação de oxigênio anomérico conforme descrito pela escola Schmidt, centra-se em converter o oxigênio de C1 em si, a um grupo lábil. 19 . este método é o mais poderoso e amplamente utilizado em reações químicas de glicosilação. Trichloroacetimidate doadores são prontamente preparados com um açúcar redutor e trichloroacetonitrile na presença de uma base tal como o carbonato de potássio (K2CO3) ou 1,8-diazabiciclo [5.4.0] undec-7-ene (DBU). Estas espécies são então ativadas usando ácidos de Lewis. 20
Recentemente, informamos que os doadores azido-trichloroacetimidate-1-2 podem ser preparados diretamente do glycals. O processo envolve uma reação de dois, um pot-procedimento de ésteres 2-azido-1-nitrato. 21 este protocolo detalhado destina-se a ajudar os profissionais em concluir com sucesso a transformação em alto rendimento. De particular interesse é a primeira etapa da sequência, que se concentra na denitration térmica sob microondas - assistida aquecimento. Também esperamos proporcionar um tutorial visual na empregando reatores de microondas em síntese orgânica.

<table>
	<tbody>
		<tr>
			<td>230 400 mesh silica gel</td>
			<td>SiliCycle Inc</td>
			<td>R10030B</td>
			<td></td>
		</tr>
		<tr>
			<td>TLC plates</td>
			<td>SiliCycle Inc</td>
			<td>TLG-R10014B-527</td>
			<td></td>
		</tr>
		<tr>
			<td>Ceric ammonium molybdate</td>
			<td>Sigma-Aldrich</td>
			<td>A1343</td>
			<td></td>
		</tr>
		<tr>
			<td>Solvent Still</td>
			<td>Mbraun</td>
			<td>MB-SPS-800</td>
			<td></td>
		</tr>
		<tr>
			<td>Infared spectrometer</td>
			<td>Thermo</td>
			<td>Thermo Electron IR100</td>
			<td></td>
		</tr>
		<tr>
			<td>Nuclear Magnetic Resonance</td>
			<td>Bruker</td>
			<td></td>
			<td>400, 600 MHz</td>
		</tr>
		<tr>
			<td>LC/MS</td>
			<td>Thermo/Dionex</td>
			<td></td>
			<td>Single quad, ESI</td>
		</tr>
		<tr>
			<td>HRMS</td>
			<td>Agilent</td>
			<td>Synapt G2 S HDMS</td>
			<td></td>
		</tr>
		<tr>
			<td>Microwave reactor</td>
			<td>Anton Parr</td>
			<td>Anton Parr G10 Monowave 200</td>
			<td></td>
		</tr>
		<tr>
			<td>DBU</td>
			<td>Sigma-Aldrich</td>
			<td>139009</td>
			<td></td>
		</tr>
		<tr>
			<td>CCl3CN</td>
			<td>Sigma-Aldrich</td>
			<td>T53805</td>
			<td></td>
		</tr>
		<tr>
			<td>Pyridine</td>
			<td>Sigma-Aldrich</td>
			<td>270970</td>
			<td></td>
		</tr>
		<tr>
			<td>Acetone</td>
			<td>Fisher Scientific</td>
			<td>A18-20</td>
			<td>Tech. grade</td>
		</tr>
		<tr>
			<td>Phase separator</td>
			<td>Biotage</td>
			<td>120-1901-A</td>
			<td></td>
		</tr>
		<tr>
			<td>Rotary evaporator</td>
			<td>Buchi</td>
			<td>R-100</td>
			<td></td>
		</tr>
	</tbody>
</table>

one-pot microwave-assisted conversion of anomeric nitrate-esters to trichloroacetimidates

O objetivo do procedimento a seguir é fornecer uma demonstração da conversão um pote de um 2-azido-1-nitrato-éster de um doador de glycosyl trichloroacetimidate. Na sequência de azido-nitração de um glycal, o éster de 2-azido-1-nitrato de produto pode ser hidrolisado sob irradiação de microondas-assistida. Essa transformação é normalmente conseguida usando reagentes fortemente nucleofílicos e tempos de reação prolongados. Irradiação de microondas induz a hidrólise, na ausência de reagentes, com curtos tempos de reação. Após denitration, o álcool intermediário anomérico é convertido, na mesma panela, com o correspondente 2-azido-1-trichloroacetimidate.

A tecnologia descrita neste documento foi demonstrada em um pool de três ésteres 2-azido-1-nitrato. Em cada caso, o primeiro passo da reação foi completo dentro de 20 minutos.
<img alt="Figure 2" class="xfigimg" src="/files/ftp_upload/56610/56610fig2v3.jpg"> Figura 2. Um exemplo representativo de hidrólise (1 ->2) e um pot-conversão do éster 2-azido-1-nitrato de <stron...

Watch this Scientific Journal Video about One-pot Microwave-assisted Conversion of Anomeric Nitrate-esters to Trichloroacetimidates at JoVE.com

One-pot Microwave-assisted Conversion of Anomeric Nitrate-esters to Trichloroacetimidates

Um pot-assistida por microondas conversão de nitrato anomérico-ésteres de Trichloroacetimidates

2-azido-1-nitrato-éster pode ser convertido para o correspondente 2-azido-1-trichloroacetimidate em um procedimento de um pote. O objetivo do manuscrito é demonstrar a utilidade do reator do microondas na síntese de carboidratos.

The goal of the following procedure is to provide a demonstration of the one-pot conversion of a 2-azido-1-nitrate-ester to a trichloroacetimidate ...

one-pot-microwave-assisted-conversion-anomeric-nitrate-esters-to

Research

JoVE Journal

Chemistry

7.4K visualizações.  Vanderbilt University. 2-azido-1-nitrato-éster pode ser convertido para o correspondente 2-azido-1-trichloroacetimidate em um procedimento de um pote. O objetivo do manuscrito é demonstrar a utilidade do reator do microondas na síntese de carboidratos.

Vídeo: One-pot Microwave-assisted Conversion of Anomeric Nitrate-esters to Trichloroacetimidates

Microwave-assisted Intramolecular Dehydrogenative Diels-Alder Reactions for the Synthesis of Functionalized Naphthalenes/Solvatochromic Dyes

Functionalized naphthalenes have applications in a variety of research fields ranging from the synthesis of natural or biologically active molecules to the preparation of new organic dyes. Although numerous strategies have been reported to access naphthalene scaffolds, many procedures still present limitations in terms of incorporating functionality, which in turn narrows the range of available substrates. The development of versatile methods for direct access to substituted naphthalenes is therefore highly desirable.
The Diels-Alder (DA) cycloaddition reaction is a powerful and attractive method for the formation of saturated and unsaturated ring systems from readily available starting materials. A new microwave-assisted intramolecular dehydrogenative DA reaction of styrenyl derivatives described herein generates a variety of functionalized cyclopenta[b]naphthalenes that could not be prepared using existing synthetic methods. When compared to conventional heating, microwave irradiation accelerates reaction rates, enhances yields, and limits the formation of undesired byproducts.
The utility of this protocol is further demonstrated by the conversion of a DA cycloadduct into a novel solvatochromic fluorescent dye via a Buchwald-Hartwig palladium-catalyzed cross-coupling reaction. Fluorescence spectroscopy, as an informative and sensitive analytical technique, plays a key role in research fields including environmental science, medicine, pharmacology, and cellular biology. Access to a variety of new organic fluorophores provided by the microwave-assisted dehydrogenative DA reaction allows for further advancement in these fields.

Microwave-assisted intramolecular dehydrogenative Diels-Alder (DA) reactions provide concise access to functionalized cyclopenta[b]naphthalene building blocks. The utility of this methodology is demonstrated by one-step conversion of the dehydrogenative DA cycloadducts into novel solvatochromic fluorescent dyes via Buchwald-Hartwig palladium-catalyzed cross-coupling reactions.

Microondas assistidas Intramoleculares Dehydrogenative Diels Alder-Reações para a síntese de Naftalenos funcionalizados / Corantes solvatocrômico

Functionalized naphthalenes have applications in a variety of research fields ranging from the synthesis of natural or biologically active molecules to ...

Química

Microwave-assisted Functionalization of Poly(ethylene glycol) and On-resin Peptides for Use in Chain Polymerizations and Hydrogel Formation

One of the main benefits to using poly(ethylene glycol) (PEG) macromers in hydrogel formation is synthetic versatility. The ability to draw from a large variety of PEG molecular weights and configurations (arm number, arm length, and branching pattern) affords researchers tight control over resulting hydrogel structures and properties, including Young&#8217;s modulus and mesh size. This video will illustrate a rapid, efficient, solvent-free, microwave-assisted method to methacrylate PEG precursors into poly(ethylene glycol) dimethacrylate (PEGDM). This synthetic method provides much-needed starting materials for applications in drug delivery and regenerative medicine. The demonstrated method is superior to traditional methacrylation methods as it is significantly faster and simpler, as well as more economical and environmentally friendly, using smaller amounts of reagents and solvents. We will also demonstrate an adaptation of this technique for on-resin methacrylamide functionalization of peptides. This on-resin method allows the N-terminus of peptides to be functionalized with methacrylamide groups prior to deprotection and cleavage from resin. This allows for selective addition of methacrylamide groups to the N-termini of the peptides while amino acids with reactive side groups (e.g.&#160;primary amine of lysine, primary alcohol of serine, secondary alcohols of threonine, and phenol of tyrosine) remain protected, preventing functionalization at multiple sites. This article will detail common analytical methods (proton Nuclear Magnetic Resonance spectroscopy (;H-NMR) and Matrix Assisted Laser Desorption Ionization Time of Flight mass spectrometry (MALDI-ToF)) to assess the efficiency of the functionalizations. Common pitfalls and suggested troubleshooting methods will be addressed, as will modifications of the technique which can be used to further tune macromer functionality and resulting hydrogel physical and chemical properties. Use of synthesized products for the formation of hydrogels for drug delivery and cell-material interaction studies will be demonstrated, with particular attention paid to modifying hydrogel composition to affect mesh size, controlling hydrogel stiffness and drug release.

Microwave-assisted Functionalization of Polyethylene glycol and On-resin Peptides for Use in Chain Polymerizations and Hydrogel Formation

This video will illustrate a rapid, efficient method to methacrylate poly(ethylene glycol), enabling chain polymerizations and hydrogel synthesis. It will demonstrate how to similarly introduce methacrylamide functionalities into peptides, detail common analytical methods to assess functionalization efficiency, provide suggestions for troubleshooting and advanced modifications, and demonstrate typical hydrogel characterization techniques.

A funcionalização assistida por microondas, de poli (etileno glicol) e Peptídeos On-resina para uso em Polimerizações cadeia e formação de hidrogel

One of the main benefits to using poly(ethylene glycol) (PEG) macromers in hydrogel formation is synthetic versatility. The ability to draw from a large ...

Preparation of Silica Nanoparticles Through Microwave-assisted Acid-catalysis

Microwave-assisted synthetic techniques were used to quickly and reproducibly produce silica nanoparticle sols using an acid catalyst with nanoparticle diameters ranging from 30-250 nm by varying the reaction conditions. Through the selection of a microwave compatible solvent, silicic acid precursor, catalyst, and microwave irradiation time, these microwave-assisted methods were capable of overcoming the previously reported shortcomings associated with synthesis of silica nanoparticles using microwave reactors. The siloxane precursor was hydrolyzed using the acid catalyst, HCl. Acetone, a low-tan &#948; solvent, mediates the condensation reactions and has minimal interaction with the electromagnetic field. Condensation reactions begin when the silicic acid precursor couples with the microwave radiation, leading to silica nanoparticle sol formation. The silica nanoparticles were characterized by dynamic light scattering data and scanning electron microscopy, which show the materials&#39; morphology and size to be dependent on the reaction conditions. Microwave-assisted reactions produce silica nanoparticles with roughened textured surfaces that are atypical for silica sols produced by St&#246;ber&#39;s methods, which have smooth surfaces.

Silica nanoparticles were prepared using acid-catalysis of a siloxane precursor and microwave-assisted synthetic techniques resulting in the controlled growth of nanomaterials ranging from 30-250 nm in diameter. The growth dynamics can be controlled by varying the initial silicic acid concentration, time of the reaction, and temperature of reaction.

Microwave-assisted synthetic techniques were used to quickly and reproducibly produce silica nanoparticle sols using an acid catalyst with nanoparticle ...

Preparation of N-(2-alkoxyvinyl)sulfonamides from N-tosyl-1,2,3-triazoles and Subsequent Conversion to Substituted Phthalans and Phenethylamines

Decomposition of N-tosyl-1,2,3-triazoles with rhodium(II) acetate dimer in the presence of alcohols forms synthetically versatile N-(2-alkoxyvinyl)sulfonamides, which react under a variety of conditions to afford useful N- and O-containing compounds. Acid-catalyzed addition of alcohols or thiols to N-(2-alkoxyvinyl)sulfonamide-containing phthalans provides access to ketals and thioketals, respectively. Selective reduction of the vinyl group in N-(2-alkoxyvinyl)sulfonamide-containing phthalans via hydrogenation yields the corresponding phthalan in good yield, whereas reduction with sodium bis(2-methoxyethoxy)aluminumhydride generates a ring-opened phenethylamine analogue. Because the N-(2-alkoxyvinyl)sulfonamide functional group is synthetically versatile, but often hydrolytically unstable, this protocol emphasizes key techniques in preparing, handling, and reacting these pivotal substrates in several useful transformations.

Preparation of N-2-alkoxyvinylsulfonamides from N-tosyl-1,2,3-triazoles and Subsequent Conversion to Substituted Phthalans and Phenethylamines

Representative experimental procedures for the synthesis of N-(2-alkoxyvinyl)sulfonamides and subsequent conversion to phthalan and phenethylamine derivatives are presented in detail.

Preparação de N-(2-alcoxivinil)sulfonamidas a partir de N-tosil-1,2,3-triazóis e Conversão Subsequente para Fitalanos e Fenetilaminas Substituídas

Decomposition of N-tosyl-1,2,3-triazoles with rhodium(II) acetate dimer in the presence of alcohols forms synthetically versatile ...

Reducing Willow Wood Fuel Emission by Low Temperature Microwave Assisted Hydrothermal Carbonization

Biomass is a sustainable fuel, as its CO2 emissions are reintegrated in biomass growth. However, the inorganic precursors in the biomass cause a negative environmental impact and slag formation. The selected short rotation coppice (SRC) willow wood has a high ash content (<img alt="Equation 1" src="/files/ftp_upload/58970/58970eq1.jpg" /> = 1.96%) and, therefore, a high content of emission and slag precursors. Therefore, the reduction of minerals from SRC willow wood by low temperature microwave assisted hydrothermal carbonization (MAHC) at 150 &#176;C, 170 &#176;C, and 185 &#176;C is investigated. An advantage of MAHC over conventional reactors is an even temperature conductance in the reaction medium, as microwaves penetrate the whole reactor volume. This allows a better temperature control and a faster cooldown. Therefore, a succession of depolymerization, transformation and repolymerization reactions can be analyzed effectively. In this study, the analysis of the mass loss, ash content and composition, heating values and molar O/C and H/C ratios of the treated and untreated SCR willow wood showed that the mineral content of the MAHC coal was reduced and the heating value increased. The process water showed a decreasing pH and contained furfural and 5-methylfurfural. A process temperature of 170 &#176;C showed the best combination of energy input and ash component reduction. The MAHC allows a better understanding of the hydrothermal carbonization process, while a large-scale industrial application is unlikely because of the high investment costs.

A protocol for the emission precursor depletion from low quality biomass by low temperature microwave assisted hydrothermal carbonization treatment is presented. This protocol includes the microwave parameters and the analysis of the biocoal product and process water.

Reduzindo a emissão de combustível de madeira do salgueiro pela baixa temperatura microondas assistida hidrotermal carbonização

Biomass is a sustainable fuel, as its CO2 emissions are reintegrated in biomass growth. However, the inorganic precursors in the biomass cause a negative ...

Synthesis of In37P20(O2CR)51 Clusters and Their Conversion to InP Quantum Dots

This text presents a method for the synthesis of In37P20(O2C14H27)51 clusters and their conversion to indium phosphide quantum dots. The In37P20(O2CR)51 clusters have been observed as intermediates in the synthesis of InP quantum dots from molecular precursors (In(O2CR)3, HO2CR, and P(SiMe3)3) and may be isolated as a pure reagent for subsequent study and use as a single-source precursor. These clusters readily convert to crystalline and relatively monodisperse samples of quasi-spherical InP quantum dots when subjected to thermolysis conditions in the absence of additional precursors above 200 &#176;C. The optical properties, morphology, and structure of both the clusters and quantum dots are confirmed using UV-Vis spectroscopy, photoluminescence spectroscopy, transmission electron microscopy, and powder X-ray diffraction. The molecular symmetry of the clusters is additionally confirmed by solution-phase 31P NMR spectroscopy. This protocol demonstrates the preparation and isolation of atomically-precise InP clusters, and their reliable and scalable conversion to InP QDs.

Synthesis of In37P20O2CR51 Clusters and Their Conversion to InP Quantum Dots

A protocol for the synthesis of In37P20(O2C14H27)51 clusters and their conversion to indium phosphide quantum dots is presented.

Síntese de37P20(O2CR)51 clusters e sua conversão para pontos Quantum INP

This text presents a method for the synthesis of In37P20(O2C14H27)51 clusters and their conversion to indium phosphide quantum dots. The In37P20(O2CR)51 ...

Microwave-Assisted Preparation of 1-Aryl-1H-pyrazole-5-amines

A synthetic process for the preparation of a variety of 1-aryl-1H-pyrazole-5-amines was developed. The microwave-mediated nature of this method makes it efficient in both time and resources and utilizes water as the solvent. 3-Aminocrotononitrile or an appropriate &#945;-cyanoketone is combined with an aryl hydrazine and dissolved in 1 M HCl. The mixture is then heated in a microwave reactor at 150 &#176;C, typically for 10-15 min. The product can be readily obtained by basifying the solution with 10% NaOH and isolating the desired compound with a simple vacuum filtration. The use of water as a solvent in this reaction lends to its ease and utility in production, and this method is easily reproducible with a variety of functional groups. Typical isolated yields range from 70-90%, and reactions can be performed on the milligram to gram scale with little to no change in observed yields. Some of the applications of these molecules and their derivatives include pesticides, anti-malarials, and chemotherapeutics, among many others.

Microwave-Assisted Preparation of 1-Aryl-1H-pyrazole-5-amines

1-Aryl-1H-pyrazole-5-amines are prepared from aryl hydrazines combined with either 3-aminocrotononitrile or an &#945;-cyanoketone in a 1 M HCl solution using a microwave reactor. Most reactions are done in 10-15 minutes and pure product can be obtained via vacuum filtration with typical isolated yields of 70-90%.

Preparação Assistida por Micro-ondas de 1-Aril-1H-pirazol-5-Aminas

A synthetic process for the preparation of a variety of 1-aryl-1H-pyrazole-5-amines was developed. The microwave-mediated nature of this method makes it ...

Hierarchical and Programmable One-Pot Oligosaccharide Synthesis

This article presents a general experimental protocol for programmable one-pot oligosaccharide synthesis and demonstrates how to use Auto-CHO software for generating potential synthetic solutions. The programmable one-pot oligosaccharide synthesis approach is designed to empower fast oligosaccharide synthesis of large amounts using thioglycoside building blocks (BBLs) with the appropriate sequential order of relative reactivity values (RRVs). Auto-CHO is a cross-platform software with a graphical user interface that provides possible synthetic solutions for programmable one-pot oligosaccharide synthesis by searching a BBL library (containing about 150 validated and &#62;50,000 virtual BBLs) with accurately predicted RRVs by support vector regression. The algorithm for hierarchical one-pot synthesis has been implemented in Auto-CHO and uses fragments generated by one-pot reactions as new BBLs. In addition, Auto-CHO allows users to give feedback for virtual BBLs to keep valuable ones for further use. One-pot synthesis of stage-specific embryonic antigen 4 (SSEA-4), which is a pluripotent human embryonic stem cell marker, is demonstrated in this work.

This protocol demonstrates how to use the Auto-CHO software for hierarchical and programmable one-pot synthesis of oligosaccharides. It also describes the general procedure for RRV determination&#160;experiments and one-pot glycosylation of SSEA-4.

Síntese de Oligosacárido de um pote programável e hierárquica

This article presents a general experimental protocol for programmable one-pot oligosaccharide synthesis and demonstrates how to use Auto-CHO software for ...

Versatile CO2 Transformations into Complex Products: A One-pot Two-step Strategy

CO2 transformations using a one-pot two-step method are presented herein. The purpose of the method is to give access to a variety of value-added products and notably to generate chiral carbon centers. The crucial first step consists in the selective double hydroboration of CO2 catalyzed by an iron hydride complex. The product obtained with this 4 e- reduction is a rare bis(boryl)acetal, compound 1, which is subjected in situ to three different reactions in a second step. The first reaction concerns a condensation reaction with (diisopropyl)phenylamine affording the corresponding imine 2. In the second and third reaction, intermediate 1 reacts with triazol-5-ylidene (Enders&#39; carbene) to afford compounds 3 or 4, depending on the reaction conditions. In both compounds, C-C bonds are formed, and chiral centers are generated from CO2 as the only source of carbon. Compound 4 exhibits two chiral centers obtained in a diastereoselective manner in a formose-type mechanism. We proved that the remaining boryl fragment plays a key role in this unprecedented stereocontrol. The interest of the method stands on the reactive and versatile nature of 1, giving rise to various complex molecules from a single intermediate. The complexity of a two-step method is compensated by the overall short reaction time (2 h for the larger reaction time), and mild reaction conditions (25 &#176;C to 80 &#176;C and 1 to 3 atm of CO2).

Versatile CO2 Transformations into Complex Products: A One-pot Two-step Strategy

CO2 transformations are conducted in a one-pot two-step procedure for the synthesis of complex molecules. The selective 4 e- reduction of CO2 with a hydroborane reductant affords a reactive and versatile bis(boryl)acetal intermediate which is subsequently involved in condensation reaction or carbene-mediated C-C coupling generation.

Transformações versáteis de CO2 em produtos complexos: uma estratégia de duas etapas de um pote

CO2 transformations using a one-pot two-step method are presented herein. The purpose of the method is to give access to a variety of value-added products ...

A Microwave-Assisted Direct Heteroarylation of Ketones Using Transition Metal Catalysis

Heteroarylation introduces heteroaryl fragments to organic molecules. Despite the numerous available reactions reported for arylation via transition metal catalysis, the literature on direct heteroarylation is scarce. The presence of heteroatoms such as nitrogen, sulfur and oxygen often make heteroarylation a challenging research field due to catalyst poisoning, product decomposition and the rest. This protocol details a highly efficient direct &#945;-C(sp3) heteroarylation of ketones under microwave irradiation. Key factors for successful heteroarylation include the use of XPhos Palladacycle Gen. 4 Catalyst, excess base to suppress side reactions and the high temperature and pressure achieved in a sealed reaction vial under microwave irradiation. The heteroarylation compounds prepared by this method were fully characterized by proton nuclear magnetic resonance spectroscopy (1H NMR), carbon nuclear magnetic resonance spectroscopy (13C NMR) and high-resolution mass spectrometry (HRMS). This methodology has several advantages over literature precedents including broad substrate scope, rapid reaction time, greener procedure and operational simplicity by eliminating the preparation of intermediates such as silyl enol ether. Possible applications for this protocol include, but are not limited to, diversity-oriented synthesis for the discovery of biologically active small molecules, domino synthesis for the preparation of natural products and ligand development for new transition metal catalytic systems.

Heteroaryl compounds are important molecules utilized in organic synthesis, medicinal and biological chemistry. A microwave-assisted heteroarylation using palladium catalysis provides a rapid and efficient method to attach heteroaryl moieties directly to ketone substrates.

Uma Heteroaryação Direta assistida por micro-ondas de cetonas usando catalisisa metálica de transição

Heteroarylation introduces heteroaryl fragments to organic molecules. Despite the numerous available reactions reported for arylation via transition metal ...

Um pot-assistida por microondas conversão de nitrato anomérico-ésteres de Trichloroacetimidates

Resumo

Explore mais vídeos

Capítulos neste vídeo