Войдите в систему

The unit rectangular pulse function is mathematically represented by a rectangular function centered at the origin with a height of one unit. This function is defined by two parameters: T, which specifies the center location of the pulse along the time axis, and τ, which determines the pulse duration.

For example, consider a rectangular pulse with a 5V amplitude, a 3-second duration, and centered at t=2 seconds. This pulse can be expressed using the rectangular function, written as,

Equation1

Synthesizing the rectangular pulse can be demonstrated graphically by adding two time-shifted step functions sequentially. In general terms, a unit rectangular function can always be expressed using the unit step function as follows:

Equation2

The unit triangular function is mathematically expressed via the triangular function. It has unit height and is centered at the origin. For instance, consider a triangular pulse centered at t=3 seconds, with a magnitude of 2 and a width of 2 seconds. To express this triangular pulse, replace every t with t−3 and set the width equal to 2. The defined signal can be written as,

Equation3

This triangular pulse function can be illustrated graphically, showing how its height reaches 2 at the center and tapers off to zero at the edges, spanning a total width of 2 seconds.

Both unit rectangular and triangular functions are fundamental in signal processing for representing various waveform shapes and are used in multiple applications for modeling and analyzing signals and systems. These functions are essential for understanding more complex signal behaviors and operations.

Теги
Rectangular Pulse FunctionTriangular Pulse FunctionUnit Rectangular FunctionUnit Triangular FunctionAmplitudePulse DurationTime AxisStep FunctionSignal ProcessingWaveform ShapesModeling SignalsAnalyzing Systems

Из главы 13:

article

Now Playing

13.6 : Rectangular and Triangular Pulse Function

Introduction to Signals and Systems

402 Просмотры

article

13.1 : Signal and System

Introduction to Signals and Systems

294 Просмотры

article

13.2 : Classification of Signals

Introduction to Signals and Systems

291 Просмотры

article

13.3 : Energy and Power Signals

Introduction to Signals and Systems

184 Просмотры

article

13.4 : Even and Odd Signals

Introduction to Signals and Systems

549 Просмотры

article

13.5 : Basic Continuous Time Signals

Introduction to Signals and Systems

157 Просмотры

article

13.7 : Exponential and Sinusoidal Signals

Introduction to Signals and Systems

183 Просмотры

article

13.8 : Basic Discrete Time Signals

Introduction to Signals and Systems

177 Просмотры

article

13.9 : Basic Operations on Signals

Introduction to Signals and Systems

302 Просмотры

article

13.10 : Classification of Systems-I

Introduction to Signals and Systems

143 Просмотры

article

13.11 : Classification of Systems-II

Introduction to Signals and Systems

115 Просмотры

JoVE Logo

Исследования

Образование

О JoVE

Авторские права © 2025 MyJoVE Corporation. Все права защищены