The instrumentation of atomic emission spectrometry (AES) involves various components, including atomization devices that convert samples into gas-phase atoms and ions. There are two main types of atomization devices: continuous and discrete atomizers. Continuous atomizers, like plasmas and flames, introduce samples in a constant stream, while discrete atomizers inject individual samples using syringes or autosamplers. The most common discrete atomizer is the electrothermal atomizer.

Nebulization is the process of introducing samples in the form of aerosols. A nebulizer generates a fine spray of droplets from the liquid sample, allowing efficient atomization. Once atomized, the sample in a flame or plasma forms a steady-state population of atoms, molecules, and ions. The emission from the plasma is then separated into constituent wavelengths using a wavelength isolation device, such as a monochromator, polychromator, or spectrograph. The isolated radiation is converted into electrical signals by transducers or array detectors, which are then processed and analyzed by computer systems.

Inductively coupled plasma (ICP) emission systems utilize a high-temperature plasma called an argon plasma torch instead of a flame. This enables a broader application and rapid multi-element analysis. In the direct-current plasma source (DCP), heating of inert gas is achieved through a DC-arc, establishing the plasma in a high-velocity gas stream. The DCP design commonly uses an inverted V-shaped electrode assembly with the excitation region at the intersection of argon streams, and a nebulizer is employed to inject the sample at this point.

Different instruments are available for multi-element determinations, including sequential spectrometers that scan different emission lines in sequence and simultaneous spectrometers that use polychromators or spectrographs to measure multiple wavelengths simultaneously. The instrumentation of atomic emission spectrometry offers different optical path options, including sequential optical paths with monochromators for sequential wavelength measurement and simultaneous direct reading polychromators with multiple exit slits and phototubes for simultaneous measurement of multiple emission lines.

From Chapter 14:

article

Now Playing

14.10 : Atomic Emission Spectroscopy: Instrumentation

Atomic Spectroscopy

169 Views

article

14.1 : Atomic Spectroscopy: Absorption, Emission, and Fluorescence

Atomic Spectroscopy

423 Views

article

14.2 : Atomic Spectroscopy: Effects of Temperature

Atomic Spectroscopy

160 Views

article

14.3 : Atomic Absorption Spectroscopy: Overview

Atomic Spectroscopy

321 Views

article

14.4 : Atomic Absorption Spectroscopy: Instrumentation

Atomic Spectroscopy

285 Views

article

14.5 : Atomic Absorption Spectroscopy: Radiation and Light Sources

Atomic Spectroscopy

191 Views

article

14.6 : Atomic Absorption Spectroscopy: Atomization Methods

Atomic Spectroscopy

213 Views

article

14.7 : Atomic Absorption Spectroscopy: Interference

Atomic Spectroscopy

289 Views

article

14.8 : Atomic Absorption Spectroscopy: Lab

Atomic Spectroscopy

174 Views

article

14.9 : Atomic Emission Spectroscopy: Overview

Atomic Spectroscopy

351 Views

article

14.11 : Atomic Emission Spectroscopy: Interference

Atomic Spectroscopy

80 Views

article

14.12 : Inductively Coupled Plasma Atomic Emission Spectroscopy: Principle

Atomic Spectroscopy

309 Views

article

14.13 : Inductively Coupled Plasma Atomic Emission Spectroscopy: Instrumentation

Atomic Spectroscopy

112 Views

article

14.14 : Atomic Emission Spectroscopy: Lab

Atomic Spectroscopy

90 Views

article

14.15 : Atomic Fluorescence Spectroscopy

Atomic Spectroscopy

148 Views

See More

JoVE Logo

Privacy

Terms of Use

Policies

Research

Education

ABOUT JoVE

Copyright © 2025 MyJoVE Corporation. All rights reserved