In Vitro and In Vivo Detection of Mitophagy in Human Cells, C. Elegans, and Mice

Summary

Mitophagy, the process of clearing damaged mitochondria, is necessary for mitochondrial homeostasis and health maintenance. This article presents some of the latest mitophagy detection methods in human cells, Caenorhabditis elegans, and mice.

Abstract

Mitochondria are the powerhouses of cells and produce cellular energy in the form of ATP. Mitochondrial dysfunction contributes to biological aging and a wide variety of disorders including metabolic diseases, premature aging syndromes, and neurodegenerative diseases such as Alzheimer's disease (AD) and Parkinson's disease (PD). Maintenance of mitochondrial health depends on mitochondrial biogenesis and the efficient clearance of dysfunctional mitochondria through mitophagy. Experimental methods to accurately detect autophagy/mitophagy, especially in animal models, have been challenging to develop. Recent progress towards the understanding of the molecular mechanisms of mitophagy has enabled the development of novel mitophagy detection techniques. Here, we introduce several versatile techniques to monitor mitophagy in human cells, Caenorhabditis elegans (e.g., Rosella and DCT-1/ LGG-1 strains), and mice (mt-Keima). A combination of these mitophagy detection techniques, including cross-species evaluation, will improve the accuracy of mitophagy measurements and lead to a better understanding of the role of mitophagy in health and disease.

Introduction

Mitophagy is essential for mitochondrial maintenance. Mitochondria intersect multiple cell signaling pathways and are universal sub-cellular organelles responsible for cellular energy production, cell metabolism, and calcium homeostasis^1,2,3,4. Mitochondria constantly experience challenges from endogenous and exogenous sources, such as reactive oxygen species (ROS) and mitochondrial toxicants, respectively, which lead to the generation of "aged" and dysfunctional mitochondria. Accumulation of damaged mitochondria decreases the efficiency of ATP production while increasing the amount of harmful ROS, and has been linked to age-related diseases such as metabolic diseases, AD, and PD^1,5,6. To prevent mitochondria induced cellular dysfunction, cells need to specifically recognize damaged mitochondria and efficiently remove them through a cellular process termed mitochondrial autophagy (mitophagy). This demonstrated importance of mitophagy in health and disease illustrates the need for accurate and efficient methods to detect mitophagy both in vitro and in vivo.

Mitophagy is a multiple-step process involving many proteins and protein complexes^5,7,8. In brief, a damaged mitochondrion is first recognized and engulfed by a double-membraned phagophore, which can originate from the plasma membrane, endoplasmic reticulum, Golgi complex, nucleus, or mitochondrion itself^9,10. The spherical phagophore elongates and eventually seals the mitochondria inside, constituting the mitochondrial autophagosome (mitophagosome). The mitophagosome then fuses with the lysosome for degradation, forming an autolysosome in which the damaged mitochondrion is degraded and recycled^7,8. Major autophagic proteins also involved in mitophagy include: Autophagy Related 7 (ATG7) and Beclin1 (initiation), Microtubule-Associated Protein 1A/1B-Light Chain 3 (LC3-II) (LGG-1 in C. elegans) and p62 (components of phagophore), and lysosomal-associated membrane glycoprotein 2 (LAMP2)^6,7. In addition, there are several essential proteins unique to mitophagy, including PTEN-induced Putative Kinase 1 (PINK-1), Parkin1, Nuclear Dot Protein 52 kDa (NDP52), optineurin, BCL2 Interacting Protein 3 Like (NIX/BNIP3L) (DCT-1 in C. elegans), among others^5,6,11.

A common method to detect changes in levels of autophagy is by the ratio of LC3-II/LC3-I or LC3-II/actin. However, this method is nonspecific, as an increase in this ratio may reflect either an increased initiation or an impaired fusion of mitophagosome to lysosome¹². Another method is to evaluate the colocalization between an autophagy marker (e.g., LC3) and a mitochondrial protein (e.g., Translocase of Outer Mitochondrial Membrane 20 (TOMM20, which could be degraded by proteasomes)). However, this can only indicate changes in total mitophagy levels and cannot distinguish the step(s) at which blockage occurs. This can be clarified by using lysosomal inhibitors (e.g., E64d+Pepstatin A, termed EP) in parallel to cause the accumulation of mitophagosomes. The difference between the number of mitophagosomes at baseline and the number of mitophagosomes following treatment with EP can indicate mitophagy. These limitations have prompted the development of novel mitophagy detection techniques. In view of the increasing relevance of mitophagy in a wide spectrum of human diseases, we present several robust mitophagy detection techniques which may be useful for researchers. We cover both in vitro and in vivo techniques and recommend combining multiple techniques to verify changes of mitophagy.

Protocol

Animals (male and female mice) were born and bred in an accredited animal facility, in accordance and approval of the NIH Animal Care and Use Committee. Euthanasia methods must be consistent with all national and institutional regulations.

1. Detection of Mitophagy in Human Cells

1. Detection of mitophagy using mt-Keima plasmid
   NOTE: The Keima protein, fused to a mitochondria target signal, simplified as mt-Keima, has proved useful for in vivo mitophagy detection. mt-Keima is a ratiometric pH-sensitive fluorescent protein which exhibits green fluorescence (excitation 458 nm) in basic or neutral conditions and red fluorescence (excitation 561 nm) in acidic conditions. Healthy mitochondria thrive in basic or neutral conditions (pH 7-8) and are indicated by green fluorescence when transfected with mt-Keima. When mitochondria undergo mitophagy and fuse with acidic lysosomes, the pH drops to 4.5 and mitochondria containing mt-Keima exhibit red fluorescence^6,13,14. Importantly, mt-Keima is resistant to lysosomal proteases, enabling evaluation of mitophagy over longer periods. The protocol below is designed for 6-well plates.
   1. Day 1: Use either primary human cells (e.g., fibroblasts) or immortalized human cells (e.g., Hela Cells or U2OS cells). Seed approximately 0.3-1 × 10⁶ cells/well (depending on the cell growth rate to allow cells to reach 70% confluency on the next day) in a 6-well plate. Maintain the cells in complete cell culture medium (Dulbecco's Modified Eagle Medium (DMEM) medium supplemented with 10% FBS, and 1% mixed solution of penicillin-streptomycin), and incubate in a cell culture incubator at 37 °C (20% O₂, 5% CO₂). Add 1 mL complete cell culture medium/well in a 6-well plate.
      NOTE: Gene overexpression/knockdown or drug treatments can be done at this stage⁶.
   2. Day 2: Mix mt-Keima plasmid DNA⁶ and DNA transfection reagent (the mixture for one well of a 6-well plate).
      1. Dilute 15 µL of a DNA transfection reagent with 150 µL of serum-free medium according to the manufacturer's protocol.
      2. Dilute 2-5 µg of mt-Keima plasmid DNA with 150 µL of serum-free medium.
      3. Add diluted mt-Keima plasmid to diluted DNA transfection reagent, vortex for 10 s, and incubate for 10 min at room temperature.
         NOTE: Optimization of DNA transfection conditions may be necessary depending on the plate size (see the manufacturers' protocols for details).
      4. Add DNA/transfection reagent mixture dropwise to cells, then shake the plates gently for 5-10 s until the solution is completely mixed.
   3. Day 3: Change the media by replacing the DNA transfection reagent-containing medium with fresh complete cell culture medium (1 mL/well).
   4. Day 4: Image the cells using confocal microscopy⁶. Use two imaging channels: green channel (excitation 458 nm, emission 570-695 nm) to visualize normal mitochondria and red channel (excitation 561 nm, emission 570-695 nm) to visualize mitochondria which are undergoing mitophagy. Randomly image 20 areas under 40x magnification to cover a total of 100-200 cells in every well.
   5. Perform data analysis. Calculate the "mitophagy index" (percentage of mitochondria undergoing mitophagy), using image analysis software to quantify the amount of fluorescence in both the red and green channels: take the ratio of red fluorescence to red + green fluorescence, and multiply by 100⁶.
      NOTE: Alternatives to transfection include using mt-Keima stably expressed HeLa cell lines¹⁴. Since HeLa cells do not express Parkin, Parkin must be stably expressed to study Parkin-dependent mitophagy in this cell line.
2. Detection of mitophagy using the colocalization between Cytochrome C oxidase subunit II (COXII) and LAMP2
   NOTE: COXII is a mitochondrial genome-encoded inner membrane protein. The 'mitophagy index' equals the ratio of COXII colocalized with LAMP2 expressed as a percentage of the total amount of COXII.
   1. Seed HeLa cells (or other cells of interest mentioned in step 1.1.1) in a 4-well chamber slide (1-5 × 10⁴ cells in 1 mL complete cell culture medium/well) in a cell culture incubator at 37 °C (20% O₂, 5% CO₂) overnight.
   2. Add 3.0 µL of 10 mM carbonyl cyanide-4-(trifluoromethoxy)phenylhydrazone (FCCP) and incubate in the cell culture incubator (step 1.2.1) for 3 h.
      NOTE: Other drugs affecting mitophagy may be used.
   3. Remove the culture medium using a 1 mL pipette, wash the cells twice with 1 mL/well of cold (0-4 °C) 1x PBS. Let the solution sit for 10-30 s before the next wash. Then add 0.5 mL 3.7% paraformaldehyde (PFA) in 1x PBS to each well and incubate for 10 min on ice to fix the cells.
      Caution: PFA is toxin. Work in a fume hood when using PFA.
   4. Discard the PFA solution using a 1 mL pipette, wash the cells twice with cold 1X PBS (1 mL/well; let solution sit for 10 s before the next wash), and permeabilize the cells with 1 mL/well of 0.25% detergent (in 1x PBS) for 10 min on ice.
   5. Discard the permeabilizing buffer, gently wash the cells twice with cold 1x PBS and discard (let the solution sit for 10 s between washes). Block the cells with 1 mL/well of 5% FBS in 1x PBS overnight at 4 °C. Cover the chambers to prevent moisture loss.
   6. Prepare 0.5 mL/well of a mixed antibody solution with COXII antibody (mouse, 1:250 dilution) and LAMP2 antibody (rabbit, 1:20-1:50 dilution) in 1x PBS with 5% FBS, and store on ice for 0.5-1 h.
   7. Take out the 4-well chamber slide from the cold room and discard the blocking solution with a 1 mL pipette. Gently wash the cells twice with 1 mL/well of cold 1x PBS and discard (let the solution sit for 10 s between washes), then add 0.5 mL/well of mixed antibody solution. Incubate at 37 °C for 1 h on a shaker at low speed.
   8. Discard the first antibody solution using a 1 mL pipette and gently wash the cells three times with 1 mL/well of cold 1x PBS and discard. Let the solution sits for 10 s before the next wash. Add 1 mL/well of fluorescent secondary antibodies (e.g., goat anti-rabbit with wavelength 568 nm of red fluorescent protein (RFP) for LAMP2; and goat anti-mouse with wavelength 488 nm of green fluorescent protein (GFP) for COXII) in 1:250 dilution with 5% FBS in 1x PBS. Cover the 4-well chamber slide with aluminum foil and incubate at 37 °C for 1 h on a shaker at low speed.
   9. Discard the second antibody solution with a 1 mL pipette. Gently wash the cells six times with 1 mL/well of cold 1x PBS. Let the solution sit for 1 min before the next wash.
   10. Mount the cells with 50 µL/well of antifade mounting medium with DAPI, and add cover slips.
   11. Image the cells under a confocal microscope with 66x magnification and immersion oil (Tile scans/ mosaics may be used to increase the number of cells imaged by the software). Use the same settings such as channel exposure time, digital gain, digital offset, etc. throughout all imaging processes (see software instructions for details)¹⁵.
   12. Use colocalization analysis software to quantitatively analyze at least 20 random images of 100 cells¹⁵. Use the "Closed Bezier" function to select entire individual cells. Compare the Pearson's colocalization coefficient of GFP to RFP, either weighted or unweighted, to determine mitophagy levels in analyzed cells. Maintain values for horizontal and vertical crosshairs of the colocalization analysis software throughout analysis. To accurately set these crosshairs, prepare two extra sets of cells and label one COXII and the other LAMP2. Then, set crosshairs directly above the pixel distribution for each channel¹⁵ (see software instructions for details).
3. A high throughput imaging measurement for mitophagy screening
   NOTE: Performing high throughput screens of mitophagy-inducing or mitophagy-inhibiting compounds from large compound libraries is technically demanding. An imaging technique based on the colocalization of mitochondria with autophagosomes is a more simplistic, yet highly sensitive alternative for mitophagy screening¹⁶.
   1. Day 1: Seed cells (e.g., human primary fibroblasts at 5,000 cells/100 mL cell culture media/well) in a 96-well plate (see step 1.1.1).
   2. Day 2: Treat the cells from the second day with FCCP or other compounds of interest for designated incubation time (see step 1.2.2).
   3. Follow steps 1.2.2-1.2.9 using the primary antibodies for COXII (mouse, 1:250 dilution with 5% FBS in 1x PBS) and LC3B (rabbit, 1:100-1:200 dilution with 5% FBS in 1x PBS). Alternatively, primary antibodies for COXII and LAMP2 may be used.
   4. Image the cells using a fluorescent reader¹⁶. Collect images in randomly placed fields and with a minimum 500 cells/well.
   5. Analyze data using a cell analyzer customized protocol¹⁶.

2. Detection of Mitophagy in C. elegans

NOTE: The nematode C. elegans provides a platform to assay mitophagy at the organismal level. Two strains can be used to monitor mitophagy: (1) mitochondria-targeted Rosella (mtRosella) or (2) mitophagy receptor DCT-1 fused with GFP along with autophagosomal marker LGG-1 fused with Discosoma sp. red fluorescent protein (DsRed)^5,17.

1. Mitophagy monitoring using Rosella biosensor
   NOTE: Rosella is a molecular biosensor that combines a pH-insensitive DsRed fused to a pH-sensitive GFP variant. The Rosella biosensor takes advantage of the pH differences between the acidic lysosome (pH ~4.5) and other cellular compartments. This biosensor has been used to successfully monitor mitophagy in Saccharomyces cerevisiae and several mammalian cell lines, such as HeLa, HEK293, and HCT116^18,19. We adapted this versatile dual-fluorescent reporter and generated transgenic C. elegans nematodes expressing mitochondria-targeted Rosella (mtRosella) in body-wall muscle cells. Mitophagy induction is indicated by a reduced GFP/DsRed ratio of mtRosella fluorescence.
   1. Day 1: Pick L4 larvae of worms expressing mitochondria-targeted Rosella (mtRosella) in body-wall muscle cells onto a Nematode Growth Media (NGM) plate seeded with E. coli (OP50) using a dissection microscope⁵. Place 10-20 worms/plate on at least three 3.5 cm plates. Incubate the nematodes at the standard temperature of 20 °C⁵.
      NOTE: See reference for the worm anatomy, including identification of L4 larvae²⁰, and the way to make a pick which is used to transfer worms from one location to another²¹.
   2. Day 5: Synchronize nematodes by selecting 15-20 L4 transgenic larvae and transferring them onto fresh OP50 seeded NGM plate. Use at least five plates per experimental condition.
   3. Day 7: Prepare vehicle plates for mitophagy-affecting drugs of interest or positive controls.
      1. Kill E. coli (OP50) bacteria seeded by exposing NGM plates for 15 min with 222 µW/cm² (intensity) of UV light to ensure that mitophagy-inducing compounds are not metabolized by bacteria. Plates must be exposed with 2,000 J/m².
         NOTE: Seconds of exposure needed = 2,000/((intensity in µW/cm²)*100).
      2. Add compound(s) of interest to the top of seeded NGM plates. Add an equivalent amount of compound vehicle (solvent used to dissolve compound, such as dimethyl sulfoxide (DMSO)) to the vehicle plates as a negative control. For positive control of mitophagy induction, a mitochondrial toxicant, paraquat (8 mM final concentration) was used. Add a solution containing 10 µL of 8 M paraquat stock with 190 µL of ddH₂O on the top of the agar plate for the treatment group. For the vehicle group, add a solution containing 10 µL of DMSO with 190 µL of ddH₂O on the top of the agar plate.
         NOTE: The paraquat-working solution may be kept for 1 month at 4 °C.
      3. Gently swirl the plates until the drug or vehicle coats the entire surface. Allow the plates to dry with the lids closed at room temperature for at least 1 h before transferring the worms.
         NOTE: Drug plates can also be prepared by adding drugs in the liquid NGM before it solidifies.
   4. Day 7: Transfer 10-20 of 2-day-old adult transgenic animals prepared in step 2.1.2 to plates containing either paraquat, compound(s) of interest, or vehicle (DMSO). Incubate the transgenic animals at 20 °C for 2 days.
   5. Day 9: Prepare 2% agarose pads (see Supplementary Material). Then add one droplet (10 µL) of 20 mM levamisole in M9 per pad. Immobilize the transgenic animals for imaging, by placing them in the M9-levamisole drop. Gently place a coverslip on the top.
   6. Capture single transgenic animals using a camera attached to an epifluorescence microscope. Acquire fluorescent images of whole transgenic nematodes expressing mtRosella in body-wall muscle cells at 10X magnification⁵. Save the collected images.
   7. Process the acquired images with ImageJ software. Analyze the body wall muscle cells located in the head of the worm to avoid autofluorescence in the intestinal tissue. Measure the average pixel intensity value and total area for each fluorescent image only of the head region of each animal. To analyze the specific area of interest:
      1. Select 'split channel' under the 'image' and 'color' drop-down menu to convert images .
      2. Utilize the 'freehand selection' tool to capture the fluorescent area of interest.
      3. Select the 'measurement' command under the 'analyze' drop-down menu and perform pixel intensity analysis.
      4. Pixel intensity should be normalized by dividing intensity by the total area analyzed. Upon normalization, calculate the GFP to DsRed ratio²².
   8. Use statistical analysis software to either conduct student t-test (comparison between two groups) or ANOVA (comparison among multiple groups) for statistical analysis with p < 0.05 as significant^5,17.
2. Assessing mitophagy using co-localization between DCT-1 and LGG-1
   NOTE: DCT-1 is an outer mitochondrial membrane protein that acts as a mitophagy receptor in response to stress conditions, similar to its putative orthologues BNIP3 and NIX/BNIP3L in mammals⁵. Thus, mitophagy initiation is assessed by co-localization between DCT-1 mitophagy receptor and autophagosomal membrane protein LGG-1 (homolog of the mammalian LC3).
   1. Day 1: Pick L4 larvae of transgenic animals expressing both DCT-1::GFP and DsRed::LGG-1 in body-wall muscle cells⁵ onto an OP50 seeded NGM plate. Place 5-10 worms/3.5 cm plate, and use at least three plates. Incubate the nematodes at 20 °C.
      NOTE: The transgenes are located on separate plasmids and they are not integrated in the genome. Pick up nematodes carrying both rol-6(su1006) and p_myo-2 GFP contransformation markers. Only transgenic worms with both contransformation markers express both DCT-1::GFP and DsRed::LGG-1 in body-wall muscle cells.
   2. Follow the steps from 2.1.2-2.1.5.
   3. Image single body-wall muscle cells using a camera attached to a confocal microscope^5,23. Detect the borders of entire body-wall muscle cells and take z-stack images under 63x magnification. Higher magnification can also be used.
   4. Open and process images acquired with the confocal software. Initiation of mitophagy is indicated by co-localization of the mitophagy receptor (DCT-1::GFP) to the autophagosomal marker (DsRed::LGG-1). Manually measure co-localization events in each stack of body-wall muscle cell⁵. It is essential to keep all microscope and camera settings (lens and magnifier, filters, exposure time, resolution, laser intensity, gain, etc.) consistent throughout experiments. All settings should be noted.
   5. Use statistical analysis software to either conduct student t-test (comparison between two groups) or ANOVA (comparison among multiple groups) for statistical analysis with p < 0.05 as significant^5,17. For two-way comparisons use the Student's t-test (p < 0.05 is considered significant). For multiple comparisons use the single factor (ANOVA) variance analysis, corrected by the post hoc Bonferroni test. We recommend analyzing at least 50-70 animals or 30-50 body-wall muscle cells for each experimental condition. Repeat the experiment at least three times.

3. Detection of Mitophagy in Mice

NOTE: Previous methods to detect mitophagy in mice were cumbersome, insensitive, and difficult to quantify. A transgenic mouse model expressing the mitochondrial-targeted form of the fluorescent reporter Keima (mt-Keima) can now be utilized to assess levels of mitophagy in a wide range of physiological and pathophysiological conditions.

1. Euthanize mice using a protocol approved by the Institutional Animal Care and Use Committee¹⁴.
2. Secure the mouse (ventral side up) to the working platform using pins in the limbs. Make an incision in the lower abdomen using microsurgery scissors and forceps to expose the liver²⁴. Cut a piece of liver (e.g., a piece of right lobe at 1 × 1 × 1 cm) using microsurgery scissors and forceps.
   NOTE: Detection of mitophagy in mice is complicated and requires knowledge on mouse anatomy and highly skillful mouse handling and mouse surgery. This protocol provides basic, key steps on this method, and a more detailed method is available²⁴.
3. Place the liver sample on a metal plate on ice to rapidly cool the tissue. Keep the tissue on the cold metal plate and process as quickly as possible. Optimally, use within 1 h of dissection.
4. Lift the liver sample using curved forceps and rinse with 5 mL of ice-cold 1x PBS.
5. Transfer the liver to a Petri dish (Ø 100 mm) on ice using the spoon end of a spatula.
6. Cut the liver sample by hand into 0.5-1 mm thick sections using single-edge blades.
7. Carefully transfer the tissue sections to a glass bottom dish using microsurgery forceps.
8. Carefully set the liver section with forceps to flatten on the bottom.
9. Cover the sliced liver with 3-5 drops of cold 1x PBS.
   NOTE: DAPI staining is recommended to identify the region of interest in certain tissues (e.g., brain)²⁴. To validate co-localization of the red mt-Keima signal with the lysosome, lysosomal dyes, such as dextran cascade blue and lysosensor, can be used²⁴.
10. Image the tissue sections under confocal microscopy via two sequential excitations²⁴. Set two imaging channels: "green" mt-Keima channel (excitation 458 nm, emission 570-695 nm range) and "red" mt-Keima (excitation 561 nm, emission 570-695 nm range). Maintain imaging settings between experimental conditions. For more efficient imaging, analyze two animals at once.

Results

Detection of Mitophagy in Human Cells:

Using the procedure presented here, human HeLa cells were transfected with mt-Keima plasmid. Healthy cells demonstrated a well-organized mitochondrial network (GFP, 488 nm) with few incidences of mitophagy (RFP, 561 nm). However, cells pretreated with a mitochondrial uncoupler FCCP (30 µM for 3 h) exhibited a profound increase in mitophagy incidence (Figure 1A

Discussion

Accurate measurement of mitophagy is technically demanding. Here, we have presented several robust techniques which allow for both qualitative detection of mitophagy and quantification of mitophagy levels in the most common laboratory experimental models.

To acquire replicable data, an experimental design with at least three biological repeats is necessary. All researchers involved in experimentation and analysis must be blinded to experimental group identities. Furthermore, imaging fields mus...

Materials

Name	Company	Catalog Number	Comments
mt-Keima mouse	Jackson Laboratory
Lipofectamine 2000 DNA transfection reagent	Thermofisher	#11668027
Opti-MEM medium (Gibco)	Thermofisher	#31985062	serum-free medium
mtKemia plasmid: pCHAC-mt-mKeima	addgene	#72342
COXII antibody (mouse)	abcam	#ab110258
LAMP2 antibody (rabbit)	NOVUS	#CD107b
goat-anti-rabbit with wavelength 568 nm of red fluorescent protein (RFP)	Thermofisher	#Z25306	Alexa Fluor 568 dye
goat-anti-mouse with wavelength 488 nm of green fluorescent protein (GFP)	Thermofisher	#Z25002	Alexa Fluor 488 dye
prolong gold antifade with DAPI	Invitrogen	#P36931
6-well plate	SIGMA Corning Costar	#CLS3516
4-well chamber slide	THermofisher, Nunc Lab-Tek	#171080
Nunc F 96-well plate	Thermofisher	#152038
LC3B antibody rabbit	NOVUS	#NB100-2220
DNA antibody	Progen Biotechnik	#anti-DNA mouse monoclonal, AC-30-10
DAPI	Thermofisher	#D1306	antifade mounting medium with DAPI
IN Cell analyzer (fluorescent reader )	GE Healthcare Life Sciences	#IN Cell analyzer 2200
Eclipse TE-2000e confocal microscope	Nikon	#TE-2000e
Colocalization software	Volocity	#Volocity 6.3	alternative Zeiss ZEN 2012 software
IN Cell Investigator Software	GE Healthcare Life Sciences	#28408974
cell culture medium	Thermofisher	#DMEM–Dulbecco's Modified Eagle Medium
Penicillin-Streptomycin (10,000 U/mL)	Thermofisher	#15140122
Fetal Bovine Serum	Sigma-Aldrich	#12003C-1000ML
Cell culture Incubator	Thermofisher	#Thermo Forma 3110 CO2 Water Jacketed Incubator
epifluorescence microscope	Zeiss		Zeiss Axio Imager Z2
camera	Olympus		Olympus DP71
confocal microscope	Zeiss		Zeiss Axio Observer Z1
confocal software	Zeiss		ZEN 2012
image analysis software	Image J	colocalization analysis, etc	https://imagej.nih.gov/ij/
statistical analysis software	GraphPad Software Inc., San Diego, USA		GraphPad Prism software package
material to make a worm pick	Surepure Chemetals	#4655	The pick is made of 30 gauge 90% platinum 10% iridium wire
IR: N2;Ex[pmyo-3 TOMM-20::Rosella]	Material inquiry to Tavernarakis Nektarios		Maintain transgenic animals at 20 °C
IR: N2; Ex[pdct-1 DCT-1::GFP; pmyo-3 DsRed::LGG-1]	Material inquiry to Tavernarakis Nektarios
pmyo-3 TOMM-20::Rosella	Material inquiry to Tavernarakis Nektarios
pdct-1 DCT-1::GFP	Material inquiry to Tavernarakis Nektarios
pmyo-3 DsRed::LGG-1	Material inquiry to Tavernarakis Nektarios
Paraquat solution	see supplementary data for preparation
M9 buffer	see supplementary data for preparation
M9-levamisole buffer	see supplementary data for preparation
Glass Microscope Slides and Coverslips	Fisher Scientific	#B9992000
Surgical forceps	STERIS Animal Health	19 Piece Canine Spay Pack Economy
Surgical scissors	STERIS Animal Health	19 Piece Canine Spay Pack Economy
1x PBS	Thermofisher	#AM9625	10x PBS needs to be diluted to 1x PBS by using ddH2O
shaker	Fisher Scientific	#11-676-178	Thermo Scientific MaxQ HP Tabletop Orbital Small Open Air Platform Shaker Package A
2% agarose pad	see supplementary data for preparation
Vibroslice blades	World precision instruments	#BLADES-2	single-edge blade
metal plate	MSC	#78803988	0.012 in thick x 6 in wide x 12 in long, 430 Stainless Steel Sheet
Triton X-100			detergent
Methyl viologen dichloride hydrate	Sigma-Aldrich	#856177	paraquat
Incubator for nematodes	AQUALYTIC		Incubator to maintain 20 °C
Dissecting stereomicroscope	Olympus	SMZ645
Confocal microscope	Zeiss	AxioObserver Z1	For nematodes (step 2)
epifluorescence microscope	Zeiss	AxioImager Z2	For nematodes (step 2)
UV crosslinker	Vilber Lourmat	BIO-LINK – BLX-E365	UV light source; 356 nm