assessing acinetobacter biofilm viability count

Acinetobacter Biyofilm Oluşumunun Değerlendirilmesi ve Biyofilmlerin Karakterizasyonu

Acinetobacter is known to cause nosocomial infections, and its human infection, especially in healthcare facilities, is increasingly reported1. It is widespread in hospitals, healthcare facilities, and food-associated environments2,3,4. It can survive for a long period in environments including hospital surfaces such as bed rails, bedside tables, the surface of ventilators, and sinks4. Such persistence on environmental surfaces may be one of the significant factors contributing to the nosocomial infections of Acinetobacter4.
Biofilm is a form of microbial life and is a microbial matrix composed of live microbial cells and extracellular polymeric substances (EPS) from the cells5. The microbial cells are embedded in the matrix and are often highly resistant to environmental stresses such as heat, salts, dryness, antibiotics, disinfectants, and shear forces6,7.
Acinetobacter can form biofilms on surfaces, suggesting that it may contribute to extended survival on environmental surfaces, including hospital surfaces, and enhanced resistance to antibiotic treatment8,9. In addition, the biofilm formation of Acinetobacter could be highly associated with human clinical outcomes8. Therefore, the biofilm formability of Acinetobacter strains could be one of the indicators in predicting environmental survival and human infections8,10.
The surface-attached biofilms can be quantified and visualized to assess biofilm formability. To quantify surface-attached biofilms, the biofilms are normally stained by biofilm-staining dyes such as crystal violet, and the dyes are eluted in solution and measured for optical density11. Visualization of biofilms is another good approach to assess biofilm formability11. Confocal Laser Scanning Microscopy (CLSM) visualization method employing specificity using fluorescent dyes could be more useful to characterize biofilm morphology compared to other techniques such as SEM12,13.
The viable cells in biofilms can be counted to estimate the number of viable cells in biofilms11. The viable cells embedded in biofilms are detached, diluted, spread on agar plates, incubated, and enumerated. Because the higher number of cells is likely to meet the infectious dose, it can provide more detailed information on biofilms, such as infection potentials associated with the number of cells13,14.
This article presents step-by-step protocols to (1) quantify surface-attached biofilms, (2) count viable cells in the biofilms, and (3) visualize the biofilms using CLSM of Acinetobacter. The presented protocols describe the methods to assess the biofilm formability of Acinetobacter isolates and characterize their biofilms.

Yazar Spotlight: Acinetobacter Biyofilm Miktarının Belirlenmesi, Değerlendirilmesi ve Görselleştirilmesi için Kapsamlı Bir Protokol 

Acinetobacter Biyofilmleri için Miktar Tayini, Canlılık Değerlendirmesi ve Görselleştirme Stratejileri

Biofilms are composed of live microbial cells and are difficult to remove from the surfaces. Acinetobacter strains commonly found in our environment, causing nosocomial infections, are also known to form biofilms on surfaces. So, we aim to develop methods to both quantify and visualize Acinetobacter biofilms.Our protocol provides a simple and easy method to quantify and visualize the biofilms of Acinetobacter. The viable number of cells inside the biofilms is quantified by using the viable count method. Our research findings reveal that the naturally-existing Acinetobacter vector strains have quite varying potentials for biofilm formation.Also, there will exist distinct morphological differences within the various biofilms. This paved the way for research focusing on the causes of such a large variation among Acinetobacter strains.

Watch this Scientific Journal Video about Assessing Acinetobacter Biofilm Viability Count at JoVE.com

Assessing Acinetobacter Biofilm Viability Count  

Acinetobacter Biyofilm Canlılık Sayımının Değerlendirilmesi

Steril polistiren 12 oyuklu plakanın her bir oyuğuna bir mililitre bakteri aşısı ekleyerek başlayın. Plakayı 24 saat boyunca 25 santigrat derecede inkübe edin. Ardından, bir pipet kullanarak süpernatanı çıkarın.Her bir oyuğa dikkatlice 1,5 mililitre steril fosfat tamponlu salin veya PBS ekleyin ve tekrar süpernatanı pipetle çıkarın. Her kuyucuğa bir mililitre steril PBS ekledikten sonra, kuyucukların alt ve duvar yüzeylerini kazımak için takılı hücre sıyırıcılar kullanın. Hasat edilen hücre süspansiyonunu, dokuz mililitre salin ve 10 ila 20 cam boncuk içeren negatif olana 10 olarak işaretlenmiş steril bir plastik tüpe aktarın.Tüpü maksimum hızda 60 saniye boyunca vorteksleyin. Daha sonra, hücre süspansiyonunun bir mililitresini önceki tüpten 10 işaretli başka bir steril tüpe, dokuz mililitre salin çözeltisi içeren negatif ikiye aktararak on kat seri seyreltme gerçekleştirin. Bu seri seyreltme işlemine tüp 10'dan negatif yediye kadar devam edin.Her seyreltmeden 100 mikrolitreyi ayrı acinetobacter agar plakalarına yayın. Agar plakalarını 30 santigrat derecede 24 ila 42 saat inkübe edin. Ardından, 10 ile 250 arasında olanları göz önünde bulundurarak, her bir plakadaki tipik kırmızı kolonilerin sayısını manuel olarak sayın.A.bouvetii hariç tüm acinetobacter izolatları, biyofilmlerinde kuyu başına yedi ila sekiz log CFU'ya eşdeğer hücrelere sahipti. A.bouvetii ise 4.4 Log CFU'da çok daha düşük bir hücre sayısına sahipti.

assessing-acinetobacter-biofilm-viability-count

Research

JoVE Journal

Biology

Assessing Acinetobacter Biofilm Viability Count

188 Görüntüleme.  Korea Food Research Institute. Steril polistiren 12 oyuklu plakanın her bir oyuğuna bir mililitre bakteri aşısı ekleyerek başlayın. Plakayı 24 saat boyunca 25 santigrat derecede inkübe edin. Ardından, bir pipet kullanarak süpernatanı çıkarın.Her bir oyuğa dikkatlice 1,5 mililitre steril fosfat tamponlu salin veya PBS ekleyin ve tekrar süpernatanı pipetle çıkarın. Her kuyucuğa bir mililitre steril PBS ekledikten sonra, kuyucukların alt ve duvar yüzeylerini kazımak için takılı hücre sıyı...

Video: Assessing Acinetobacter Biofilm Viability Count  

Quantification, Viability Assessment, and Visualization Strategies for Acinetobacter Biofilms

Acinetobacter causes nosocomial infections and its biofilm formation can contribute to the survival on dry surfaces such as hospital environments. Thus, biofilm quantification and visualization are important methods to assess the potential of Acinetobacter strains to cause nosocomial infections. The biofilms forming on the surface of the microplate can be quantified in terms of volume and cell numbers. Biofilm volumes can be quantified by staining using crystal violet, washing, destaining using ethanol, then measuring the solubilized dye using a microplate reader. To quantify the number of cells embedded in the biofilms, the biofilms are scrapped off using cell scrapers, harvested in the saline, vigorously agitated in the presence of glass beads, and spread on Acinetobacter agar. Then, the plates are incubated at 30 &#176;C for 24-42 h. After incubation, the red colonies are enumerated to estimate the number of cells in biofilms. This viable count method can also be useful for counting Acinetobacter cells in mixed-species biofilms. Acinetobacter biofilms can be visualized using fluorescent dyes. A commercially available microplate designed for microscopic analysis is employed to form biofilms. Then, the bottom-surface attached biofilms are stained with SYTO9 and propidium iodide dyes, washed, then visualized with confocal laser scanning microscopy.

This protocol describes the preparation of the inoculum, the biofilm quantification on microtiter plates using crystal violet dye, the viable count in biofilms, and the visualization of biofilms of Acinetobacter.

Acinetobacter causes nosocomial infections and its biofilm formation can contribute to the survival on dry surfaces such as hospital environments. Thus, ...

Biyoloji

Preparation of Bacterial Inoculum for Acinetobacter Biofilm Formation

Preparation of Bacterial Inoculum for Acinetobacter Biofilm Formation  

To begin the process of bacterial inoculum preparation, collect 2 to 10 microliters of the bacterial strain from the vial, using a sterile pipette tip, and inoculate a commercially-available blood agar plate with it. Using a sterile loop, streak the agar surface, thinning it out with intermittent flaming. Incubate the prepared agar plate in an upside-down position at 30 degrees Celsius for about 20 to 24 hours.Next, select a single colony of the bacterial culture with a sterile needle and inoculate five milliliters of sterile BHI broth with this culture. Incubate the inoculated broth in a shaking incubator at 30 degrees Celsius at a speed of 150 rotations per minute for about 20 to 24 hours. Then transfer one milliliter of the culture to a sterile micro-centrifuge tube and centrifuge at 6, 000 g and room temperature for 10 minutes.Following centrifugation, discard the supernatant. Add one milliliter of sterile phosphate-buffered saline, or PBS, to the pellet, and re-suspend it using a vortex. Centrifuge the re-suspended pellet at 6, 000 g for 10 minutes at room temperature and discard the supernatant.This time re-suspend the resulting pellet in sterile, tenfold-diluted BHI broth using vortex. Ensure to achieve an optical density of around 0.1 at 600 nanometers.

Acinetobacter Biyofilm Oluşumu için Bakteriyel İnokulumun Hazırlanması

Acinetobacter Biofilm Quantification Using Crystal Violet

Acinetobacter Biofilm Quantification Using Crystal Violet  

To begin, add 200 microliters of the bacterial inoculum to each well of a sterile polystyrene 96-well plate. Then add 200 microliters of deionized water into the outermost wells to keep the inner wells from drying out. Incubate the 96-well plate at 25 degrees Celsius for 24 hours.Following incubation, discard the supernatant in each well using a pipette. Carefully add 300 microliters of PBS to each well and remove the PBS again by using the pipette. Add 200 microliters of 1%crystal violet solution to each well before incubating the plate at room temperature for 30 minutes.Then after dispensing 200 microliters of absolute ethanol in each well, leave the plate for 15 minutes at room temperature. Ensure thorough mixing by pipetting the contents in each well up and down repeatedly. Using a microplate reader, measure the absorbance of the wells at 595 nanometers to determine the biofilm mass.The number of biofilms varied greatly depending on the strains, ranging from an optical density or OD value of 0.04 to 1.69 All of the Acetobacter isolates, except for A.bouvetii, formed biofilms, while A.radioresistens formed a weak biofilm. A.junii and A.baumannii formed moderate biofilms, and A.pittii and A.ursingii formed strong biofilms.

Acinetobacter (Acinetobacter) Kristal viyole kullanarak biyofilm miktar tayini

Begin by adding one milliliter of the bacterial inoculum to each well of a sterile polystyrene 12 well plate. Incubate the plate at 25 degrees Celsius for 24 hours. Then, remove the supernatant using a pipette.Carefully add 1.5 milliliters of sterile phosphate buffered saline or PBS to each well, and again, remove the supernatant with the pipette. After adding one milliliter of sterile PBS to each well once more, use fitted cell scrapers to scrape off the bottom and wall surfaces of the wells. Transfer the harvested cell suspension to a sterile plastic tube marked as 10 to the negative one containing nine milliliters of saline and 10 to 20 glass beads.Vortex the tube for 60 seconds at maximum speed. Next, perform a tenfold serial dilution by transferring one milliliter of the cell suspension from the previous tube to another sterile tube marked 10 to the negative two containing nine milliliters of saline solution. Continue this process of serial dilution up to tube 10 to the negative seven.Spread 100 microliters from each dilution onto separate acinetobacter agar plates. Incubate the agar plates at 30 degrees Celsius for 24 to 42 hours. Then count the number of typical red colonies on each plate manually, considering those within the range between 10 and 250.All the acinetobacter isolates except for A.bouvetii had cells equivalent to seven to eight log CFU per well in their biofilms. While A.bouvetii had a much lower cell number at 4.4 Log CFU.

Acinetobacter Biofilm Visualization by Confocal Laser Scanning Microscopy (CLSM)

Begin by adding 200 microliters of bacterial inoculum into each well of a sterile 96-well plate prepared for microscopic analysis. Incubate the plate at 25 degrees Celsius for 24 hours before removing the supernatant with the pipette. Next, carefully add 300 microliters of filter-sterilized deionized water into each well.Remove the supernatant using a pipette once again. In another tube, prepare a diluted mixture of SYTO 9 and propidium iodide and filter-sterilized deionized water to the respective desired final concentrations. Then add 200 microliters of the mixture into each well and incubate the plate for 20 to 30 minutes at room temperature in a dark setting.Confocal laser scanning microscopy revealed that biofilm formation significantly varied depending on the strains. A substantial amount of biofilm was found in Acinetobacter junii, Acinetobacter baumannii, and Acinetobacter ursingii with distinct biofilm morphologies.