My thanks to Sherry Kuchma, Pete Newell and Robert Shanks for providing the images in Figure 1. This work was supported by NIH grant R01AI083256 to G.A.O.

1. Growing a Biofilm
<ol>
<li>Grow a culture of the wild-type Pseudomonas aeruginosa or mutant strain over night in a rich medium (i.e. LB)</li>
<li>Dilute the over night culture 1:100 into fresh medium for biofilm assays. A standard biofilm assay medium for P. aeruginosa is M63 minimal medium supplemented with magnesium sulfate, glucose and casamino acids (see Table). As an alternative biofilm-promoting medium that stimulates less planktonic growth and a more robust biofilm, the glucose and casamino acids can be replaced with arginine as the sole carbon and energy source.</li>
<li>Add 100 &mu;L of the dilution per well in a 96 well dish. For quantitative assays, we typically use 4-8 replicate wells for each treatment.</li>
<li>Incubate the microtiter plate for 4-24 hrs at 37&deg;C.</li>
</ol>
2. Staining the Biofilm
<ol>
<li>After incubation, dump out cells by turning the plate over and shaking out the liquid.</li>
<li>Gently submerge the plate in a small tub of water (i.e., use the bottoms of pipette tip boxes for P1000 pipetmen as the tub). Shake out water. Repeat this process a second time. This step helps remove unattached cells and media components that can be stained in the next step, and significantly lowers background staining.</li>
<li>Add 125 &mu;L of a 0.1% solution of crystal violet in water to each well of the microtiter plate. Wear gloves and a lab coat while making the solution. Use caution when weighing out the CV as the powder is hydroscopic and readily stains clothing, skin, etc.</li>
<li>Incubate the microtiter plate at room temperature for 10-15 min.</li>
<li>Rinse the plate 3-4 times with water by submerging in a tub of water as outlined above, shake out and blot vigorously on a stack of paper towels to rid the plate of all excess cells and dye.</li>
<li>Turn the microtiter plate upside down and dry for a few hours or overnight.</li>
<li>For qualitative assays, the wells can be photographed when dry.</li>
</ol>
3. Quantifying the Biofilm
<ol>
<li>Add 125 &mu;L of 30% acetic acid in water to each well of the microtiter plate to solubilize the CV.</li>
<li>Incubate the microtiter plate at room temperature for 10-15 min.</li>
<li>Transfer 125 &mu;L of the solubilized CV to a new flat bottomed microtiter dish.</li>
<li>Quantify absorbance in a plate reader at 550 nm using 30% acetic acid in water as the blank.</li>
</ol>
4. Representative Results:
<img src="/files/ftp_upload/2437/2437fig1.jpg" alt="Figure 1" /> 
Figure 1. shows a representative result for biofilm formation assays performed for Pseudomonas aeruginosa, Pseudomonas fluorescens and Staphylococcus aureus. (A) A side view of the well with a biofilm of P. aeruginosa (8 hrs, 37&deg;C). (B) A side view of the well with a biofilm of P. fluorescens (6 hrs, 30&deg;C). (C) A top-down view of the biofilm formed by S. aureus in a flat-bottom microtiter plate (two wells, 24 hrs, 37&deg;C). P. aeruginosa and P. fluorescens are both motile organisms and form a biofilm at the air-liquid interface. S. aureus is non-motile and forms a biofilm on the bottom of the well.

<ol>
	<li>O'Toole, G. A., Kolter, R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Initiation+of+biofilm+formation+in+Pseudomonas+fluorescens+WCS365+proceeds+via+multiple,+convergent+signalling+pathways:+a+genetic+analysis.">Initiation of biofilm formation in Pseudomonas fluorescens WCS365 proceeds via multiple, convergent signalling pathways: a genetic analysis.</a> Mol. Microbiol. 28, 449-461 (1998).</li><li>O'Toole, G. A., Doyle, R. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=.">.</a> Methods in Enzymology. , 91-109 (1999).</li><li>Mah, T. F. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+genetic+basis+for+Pseudomonas+aeruginosa+biofilm+antibiotic+resistance.">A genetic basis for Pseudomonas aeruginosa biofilm antibiotic resistance.</a> Nature. 426, 306-310 (2003).</li><li>Kuchma, S. L., Connolly, J. P., O'Toole, G. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+three-component+regulatory+system+regulates+biofilm+maturation+and+type+III+secretion+in+Pseudomonas+aeruginosa.">A three-component regulatory system regulates biofilm maturation and type III secretion in Pseudomonas aeruginosa.</a> J Bacteriol. 187, 1441-1454 (2005).</li><li>Caiazza, N. C., O'Toole, G. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=SadB+is+required+for+the+transition+from+reversible+to+irreversible+attachment+during+biofilm+formation+by+Pseudomonas+aeruginosa+PA14.">SadB is required for the transition from reversible to irreversible attachment during biofilm formation by Pseudomonas aeruginosa PA14.</a> J Bacteriol. 186, 4476-4485 (2004).</li><li>Shanks, R. M., Sargent, J. L., Martinez, R. M., Graber, M. L., O'Toole, G. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Catheter+lock+solutions+influence+staphylococcal+biofilm+formation+on+abiotic+surfaces.">Catheter lock solutions influence staphylococcal biofilm formation on abiotic surfaces.</a> Nephrol Dial Transplant. 21, 2247-2255 (2006).</li><li>Caiazza, N. C., Merritt, J. H., Brothers, K. M., O'Toole, G. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Inverse+regulation+of+biofilm+formation+and+swarming+motility+by+Pseudomonas+aeruginosa+PA14.">Inverse regulation of biofilm formation and swarming motility by Pseudomonas aeruginosa PA14.</a> J. Bacteriol. 189, 3603-3612 (2007).</li><li>Hinsa, S. M., Espinosa-Urgel, M., Ramos, J. L., O'Toole, G. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Transition+from+reversible+to+irreversible+attachment+during+biofilm+formation+by+Pseudomonas+fluorescens+WCS365+requires+an+ABC+transporter+and+a+large+secreted+protein.">Transition from reversible to irreversible attachment during biofilm formation by Pseudomonas fluorescens WCS365 requires an ABC transporter and a large secreted protein.</a> Mol Microbiol. 49, 905-918 (2003).</li><li>Mack, D. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Characterization+of+transposon+mutants+of+biofilm-producing+Staphylococcus+epidermidis+impaired+in+the+accumulative+phase+of+biofilm+production:+genetic+identification+of+a+hexosamine-containing+polysaccharide+intracellular+adhesin.">Characterization of transposon mutants of biofilm-producing Staphylococcus epidermidis impaired in the accumulative phase of biofilm production: genetic identification of a hexosamine-containing polysaccharide intracellular adhesin.</a> Infect. Immun. 62, 3244-3253 (1994).</li><li>Vidal, O. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Isolation+of+an+Escherichia+coli+K-12+mutant+strain+able+to+form+biofilms+on+inert+surfaces:+involvement+of+a+new+ompR+allele+that+increases+curli+expression.">Isolation of an Escherichia coli K-12 mutant strain able to form biofilms on inert surfaces: involvement of a new ompR allele that increases curli expression.</a> J. Bacteriol. 180, 2442-2449 (1998).</li><li>Junker, L. M., Clardy, J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=High-throughput+screens+for+small-molecule+inhibitors+of+Pseudomonas+aeruginosa+biofilm+development.">High-throughput screens for small-molecule inhibitors of Pseudomonas aeruginosa biofilm development.</a> Antimicrob Agents Chemother. 51, 3582-3590 (2007).</li></ol>

No conflicts of interest declared.

This method can be modified for use with a wide variety of microbial species. Motile microbes typically adhere to the walls and/or bottoms of the wells, while non-motile microbes typically adhere to the bottom of the wells. The optimal conditions for biofilm formation (i.e., growth medium, temperature, time of incubation) must be determined empirically for each microbe. I recommend performing multiple replicates for each strain or condition (4-8), and including a positive control, and if possible, a negative control o...

<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en" lang="en">	
		
		<div>
		<table border="1">
		<thead>
		<tr>
		<th>Material Name</th>
		<th>Type</th>
		<th>Company</th>
		<th>Catalogue Number</th>
		<th>Comment</th>
		</tr>
		</thead>
		<tbody>
		
<tr>
<td>1 X M63</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<td>Prepare as a 5X M63 stock by dissolving 15g KH2PO4, 35g K2HPO4 and 10g (NH4)2SO4 in 1 L of water. This stock does not need to be autoclaved and can be stored at room temperature. Dilute 5X stock 1:5, autoclave, cool, then add the desired components.</td>
</tr>
<tr>
<td>KH2PO4</td>
<td>&nbsp;</td>
<td>Fisher</td>
<td>P285-500</td>
<td>&nbsp;</td>
<tr>
<td>K2HPO4</td>
<td>&nbsp;</td>
<td>Fisher</td>
<td>P288-500</td>
<td>&nbsp;</td>
<tr>
<td>(NH4)2SO4</td>
<td>&nbsp;</td>
<td>Sigma</td>
<td>A5132</td>
<td>&nbsp;</td>
<tr>
<td>Magnesium sulfate</td>
<td>&nbsp;</td>
<td>Fisher</td>
<td>M63-500</td>
<td>Add to 1 mM final concentration. Prepare as a 1 M stock in water and autoclave.</td>
</tr>
<tr>
<td>Glucose</td>
<td>&nbsp;</td>
<td>Fisher</td>
<td>D16-3</td>
<td>Add to 0.2% final concentration. Prepare as a 20% stock in water and autoclave.</td>
</tr>
<tr>
<td>Casamino acids</td>
<td>&nbsp;</td>
<td>Beckton-Dickinson</td>
<td>223050</td>
<td>Add to 0.5% final concentration. Prepare as a 20% stock in water and autoclave.</td>
</tr>
<tr>
<td>Arginine</td>
<td>&nbsp;</td>
<td>Sigma</td>
<td>A5131</td>
<td>Add to 0.4% final concentration. Prepare as a 20% stock in water and filter sterilize. This alternative carbon/energy source can replace glucose and casamino acids</td>
</tr>
<tr>
<td>Microtiter plates</td>
<td>&nbsp;</td>
<td>Beckton-Dickinson</td>
<td>353911</td>
<td>Falcon 3911, Microtest III, Flexible assay plates, 96 well, U-bottom, non-sterile, non-tissue-culture treated.</td>
</tr>
<tr>
<td>Microtiter plate lids</td>
<td>&nbsp;</td>
<td>Beckton-Dickinson</td>
<td>353913</td>
<td>The lids can be reused by cleaning with 95% ethanol in water.</td>
</tr>
<tr>
<td>Crystal violet</td>
<td>&nbsp;</td>
<td>Sigma</td>
<td>229641000</td>
<td>Prepare as a 0.1% solution in water.</td>
</tr>		</tbody>
		</table>
		</div>

microtiter dish biofilm formation assay

Biofilms are communities of microbes attached to surfaces, which can be found in medical, industrial and natural settings. In fact, life in a biofilm probably represents the predominate mode of growth for microbes in most environments. Mature biofilms have a few distinct characteristics. Biofilm microbes are typically surrounded by an extracellular matrix that provides structure and protection to the community. Microbes growing in a biofilm also have a characteristic architecture generally comprised of macrocolonies (containing thousands of cells) surrounded by fluid-filled channels. Biofilm-grown microbes are also notorious for their resistance to a range of antimicrobial agents including clinically relevant antibiotics.
The microtiter dish assay is an important tool for the study of the early stages in biofilm formation, and has been applied primarily for the study of bacterial biofilms, although this assay has also been used to study fungal biofilm formation. Because this assay uses static, batch-growth conditions, it does not allow for the formation of the mature biofilms typically associated with flow cell systems. However, the assay has been effective at identifying many factors required for initiation of biofilm formation (i.e, flagella, pili, adhesins, enzymes involved in cyclic-di-GMP binding and metabolism) and well as genes involved in extracellular polysaccharide production. Furthermore, published work indicates that biofilms grown in microtiter dishes do develop some properties of mature biofilms, such a antibiotic tolerance and resistance to immune system effectors.
This simple microtiter dish assay allows for the formation of a biofilm on the wall and/or bottom of a microtiter dish. The high throughput nature of the assay makes it useful for genetic screens, as well as testing biofilm formation by multiple strains under various growth conditions. Variants of this assay have been used to assess early biofilm formation for a wide variety of microbes, including but not limited to, pseudomonads, Vibrio cholerae, Escherichia coli, staphylocci, enterococci, mycobacteria and fungi.
In the protocol described here, we will focus on the use of this assay to study biofilm formation by the model organism Pseudomonas aeruginosa. In this assay, the extent of biofilm formation is measured using the dye crystal violet (CV). However, a number of other colorimetric and metabolic stains have been reported for the quantification of biofilm formation using the microtiter plate assay. The ease, low cost and flexibility of the microtiter plate assay has made it a critical tool for the study of biofilms.

Watch this Scientific Journal Video about Microtiter Dish Biofilm Formation Assay at JoVE.com

Microtiter Dish Biofilm Formation Assay

The assay describes a rapid means to measure early biofilm formation in bacteria and fungi. This method uses a microtiter plate as the substratum for microbial biofilm formation, and the biofilm is visualized using crystal violet strain. The assay provides either a qualitative or quantitative assay for early biofilm formation.

Biofilms are communities of microbes attached to surfaces, which can be found in medical, industrial and natural settings.  In fact, life in a biofilm ...

Research

JoVE Journal

Immunology and Infection

106.6K Görüntüleme.  Dartmouth Medical School. Tahlil, bakteri ve mantar erken biyofilm oluşumunu ölçmek için hızlı bir yöntem açıklanmıştır. Bu yöntem mikrotiter plate mikrobiyal biyofilm oluşumu için alt tabaka olarak kullanır ve biyofilm kristal viyole suşu kullanılarak görüntülenmiştir. Tahlil ya erken biyofilm oluşumu için bir kalitatif veya kantitatif sağlar.

Video: Microtiter Dish Biofilm Formation Assay

A 96 Well Microtiter Plate-based Method for Monitoring Formation and Antifungal Susceptibility Testing of Candida albicans Biofilms

Candida albicans remains the most frequent cause of fungal infections in an expanding population of compromised patients and candidiasis is now the third most common infection in US hospitals. Different manifestations of candidiasis are associated with biofilm formation, both on host tissues and/or medical devices (i.e. catheters). Biofilm formation carries negative clinical implications, as cells within the biofilms are protected from host immune responses and from the action of antifungals. We have developed a simple, fast and robust in vitro model for the formation of C. albicans biofilms using 96 well microtiter-plates, which can also be used for biofilm antifungal susceptibility testing. The readout of this assay is colorimetric, based on the reduction of XTT (a tetrazolium salt) by metabolically active fungal biofilm cells. A typical experiment takes approximately 24 h for biofilm formation, with an additional 24 h for antifungal susceptibility testing. Because of its simplicity and the use of commonly available laboratory materials and equipment, this technique democratizes biofilm research and represents an important step towards the standardization of antifungal susceptibility testing of fungal biofilms.

A 96 Well Microtiter Plate-based Method for Monitoring Formation and Antifungal Susceptibility Testing of Candida albicans Biofilms

We describe a simple, rapid and robust method for the formation of Candida albicans biofilms using 96 well microtiter plates and its utility in antifungal susceptibility testing of cells within biofilms.

İzleme Oluşumu ve Antifungal Duyarlılık Testi için 96 Şey microtiter Levha tabanlı Yöntemi Candida albicans Biyofilmler

Candida albicans remains the most frequent cause of fungal infections in an expanding population of compromised patients and candidiasis is now the third ...

İmmünoloji ve Enfeksiyon

Pseudomonas aeruginosa and Saccharomyces cerevisiae Biofilm in Flow Cells

Many microbial cells have the ability to form sessile microbial communities defined as biofilms that have altered physiological and pathological properties compared to free living microorganisms. Biofilms in nature are often difficult to investigate and reside under poorly defined conditions1. Using a transparent substratum it is possible to device a system where simple biofilms can be examined in a non-destructive way in real-time: here we demonstrate the assembly and operation of a flow cell model system, for in vitro 3D studies of microbial biofilms generating high reproducibility under well-defined conditions2,3.
The system consists of a flow cell that serves as growth chamber for the biofilm. The flow cell is supplied with nutrients and oxygen from a medium flask via a peristaltic pump and spent medium is collected in a waste container. This construction of the flow system allows a continuous supply of nutrients and administration of e.g. antibiotics with minimal disturbance of the cells grown in the flow chamber. Moreover, the flow conditions within the flow cell allow studies of biofilm exposed to shear stress. A bubble trapping device confines air bubbles from the tubing which otherwise could disrupt the biofilm structure in the flow cell.
The flow cell system is compatible with Confocal Laser Scanning Microscopy (CLSM) and can thereby provide highly detailed 3D information about developing microbial biofilms. Cells in the biofilm can be labeled with fluorescent probes or proteins compatible with CLSM analysis. This enables online visualization and allows investigation of niches in the developing biofilm. Microbial interrelationship, investigation of antimicrobial agents or the expression of specific genes, are of the many experimental setups that can be investigated in the flow cell system.

Pseudomonas aeruginosa and Saccharomyces cerevisiae Biofilm in Flow Cells

Protocol describing the application of a flow cell system for growing and analyzing microbial biofilms for Confocal Laser Scanning Microscopy (CLSM).

Pseudomonas aeruginosa ve Saccharomyces cerevisiae Biyofilm Akış Hücreler

Many microbial cells have the ability to form sessile microbial communities defined as biofilms that have altered physiological and pathological ...

In vitro Biofilm Formation in an 8-well Chamber Slide

The chronic nature of many diseases is attributed to the formation of bacterial biofilms which are recalcitrant to traditional antibiotic therapy. Biofilms are community-associated bacteria attached to a surface and encased in a matrix. The role of the extracellular matrix is multifaceted, including facilitating nutrient acquisition, and offers significant protection against environmental stresses (e.g. host immune responses). In an effort to acquire a better understanding as to how the bacteria within a biofilm respond to environmental stresses we have used a protocol wherein we visualize bacterial biofilms which have formed in an 8-well chamber slide. The biofilms were stained with the BacLight Live/Dead stain and examined using a confocal microscope to characterize the relative biofilm size, and structure under varying incubation conditions. Z-stack images were collected via confocal microscopy and analyzed by COMSTAT. This protocol can be used to help elucidate the mechanism and kinetics by which biofilms form, as well as identify components that are important to biofilm structure and stability.

In vitro Biofilm Formation in an 8-well Chamber Slide

This article describes the procedure for the formation and visualization of a bacterial biofilm grown within an 8-well chamber slide

8-iyi Odası Slayt in vitro Biyofilm Oluşumu

The chronic nature of many diseases is attributed to the formation of bacterial biofilms which are recalcitrant to traditional antibiotic therapy. ...

Antimicrobial Susceptibility Testing of Mycobacterium Tuberculosis Complex for First and Second Line Drugs by Broth Dilution in a Microtiter Plate Format

The rapid detection of antimicrobial resistance is important in the effort to control the increase in resistant Mycobacterium 
tuberculosis (Mtb). Antimicrobial susceptibility testing (AST) of Mtb has traditionally been performed by the agar method of proportion or by 
macrobroth testing on an instrument such as the BACTEC (Becton Dickinson, Sparks, MD), VersaTREK (TREK Diagnostics, Cleveland, OH) or BacT/ALERT (bioM&eacute;rieux, Hazelwood, MO). The agar proportion method, while considered the &#x201C;gold&#x201D; standard of AST, is labor intensive and requires calculation of resistance by performing colony counts on drug-containing agar as compared to drug-free agar. If there is &ge;1% growth on the drug-containing medium as compared to drug-free medium, the organism is considered resistant to that drug. The macrobroth methods require instrumentation and test break point ("critical") drug concentrations for the first line drugs (isoniazid, ethambutol, rifampin, and pyrazinamide). The method described here is commercially available in a 96 well microtiter plate format [MYCOTB (TREK Diagnostics)] and contains increasing concentrations of 12 antimicrobials used for treatment of tuberculosis including both first (isoniazid, rifampin, ethambutol) and second line drugs (amikacin, cycloserine, ethionamide, kanamycin, moxifloxacin, ofloxacin, para-aminosalicylic acid, rifabutin, and streptomycin). Pyrazinamide, a first line drug, is not included in the microtiter plate due to its need for acidic test conditions. Advantages of the microtiter system include both ease of set up and faster turn around time (14 days) compared with traditional agar proportion (21 days). In addition, the plate can be set up from inoculum prepared using either broth or solid medium. Since the microtiter plate format is new and since Mtb presents unique safety challenges in the laboratory, this protocol will describe how to safely setup, incubate and read the microtiter plate.

Antimicrobial susceptibility testing of Mycobacterium tuberculosis is challenging but critical for patient care. This microtiter plate format offers testing of 12 antimycobacterial drugs and provides minimum inhibitory concentration (MIC) values, which will aid in appropriate treatment.

Microtiter Plate Format Broth Seyreltme Birinci ve İkinci Line İlaçları Mycobacterium tuberculosis kompleksi Antimikrobiyal Duyarlılık Testi

The rapid detection of antimicrobial resistance is important in the effort to control the increase in resistant Mycobacterium 
tuberculosis (Mtb). ...

Deciphering and Imaging Pathogenesis and Cording of Mycobacterium abscessus in Zebrafish Embryos

Zebrafish (Danio rerio) embryos are increasingly used as an infection model to study the function of the vertebrate innate immune system in host-pathogen interactions.&#160;The ease of obtaining large numbers of embryos, their accessibility due to external development, their optical transparency as well as the availability of a wide panoply of genetic/immunological tools and transgenic reporter line collections, contribute to the versatility of this model.&#160;In this respect, the present manuscript describes the use of zebrafish as an&#160;in vivo&#160;model system to investigate the chronology of Mycobacterium abscessus infection. This human pathogen can exist either as smooth (S) or rough (R) variants, depending on cell wall composition, and their respective virulence can be imaged and compared in zebrafish embryos and larvae. Micro-injection of either S or R fluorescent variants directly in the blood circulation via the caudal vein, leads to chronic or acute/lethal infections, respectively. This biological system allows high resolution visualization and analysis of the role of mycobacterial cording in promoting abscess formation. In addition, the use of fluorescent bacteria along with transgenic zebrafish lines harbouring fluorescent macrophages produces a unique opportunity for multi-color imaging of the host-pathogen interactions. This article describes detailed protocols for the preparation of homogenous M. abscessus inoculum and for intravenous injection of zebrafish embryos for subsequent fluorescence imaging of the interaction with macrophages. These techniques open the avenue to future investigations involving mutants defective in cord formation and are dedicated to understand how this impacts on M. abscessus pathogenicity in a whole vertebrate.

Deciphering and Imaging Pathogenesis and Cording of Mycobacterium abscessus in Zebrafish Embryos

Optically transparent zebrafish embryos are widely used to study and visualize in real time the interactions between pathogenic microorganisms and the innate immune cells. Micro-injection of Mycobacterium abscessus, combined with fluorescence imaging, is used to scrutinize essential pathogenic features such as cord formation in zebrafish embryos.

Görüntüleme Patogenez ve Cording Deşifre ve<em&gt; Mycobacterium abscessus</em&gt; Zebra balığı Embriyolar

Zebrafish (Danio rerio) embryos are increasingly used as an infection model to study the function of the vertebrate innate immune system in host-pathogen ...

Targeting Biofilm Associated Staphylococcus aureus Using Resazurin Based Drug-susceptibility Assay

Most pathogenic bacteria are able to form biofilms during infection, but due to the difficulty of manipulating and assessing biofilms, the vast majority of laboratory work is conducted with planktonic cells. Here, we describe a peg plate biofilm assay as performed with Staphylococcus aureus. Bacterial biofilms are grown on pegs attached to a 96-well microtiter plate lid, washed through gentle submersion in buffer, and placed in a drug challenge plate. After subsequent incubation they are again washed and moved to a final recovery plate, in which the fluorescent dye resazurin serves as a viability indicator. This assay offers greatly increased ease-of-use, reliability, and reproducibility, as well as a wealth of data when conducted as a kinetic read. Moreover, this assay can be adapted to a medium-throughput drug screening approach by which an endpoint fluorescent readout is taken instead, offering a path for drug discovery efforts.

Targeting Biofilm Associated Staphylococcus aureus Using Resazurin Based Drug-susceptibility Assay

Most bacterial infections produce a biofilm. By virtue of their environment, biofilm associated bacteria are often phenotypically drug resistant. Novel antibacterial molecules that kill bacteria in biofilms are thus a high priority. We establish an assay to quickly screen for antimicrobial compounds that are effective at eradicating biofilms.

Biyofilm İlişkili Hedefleme<em&gt; Staphylococcus aureus</emKullanma&gt; Resazurin Tabanlı İlaç-duyarlılık Deneyi

Most pathogenic bacteria are able to form biofilms during infection, but due to the difficulty of manipulating and assessing biofilms, the vast majority ...

"Phagosome Closure Assay" to Visualize Phagosome Formation in Three Dimensions Using Total Internal Reflection Fluorescent Microscopy (TIRFM)

Phagocytosis is a mechanism used by specialized cells to internalize and eliminate microorganisms or cellular debris. It relies on profound rearrangements of the actin cytoskeleton that is the driving force for plasma membrane extension around the particle. In addition, efficient engulfment of large material relies on focal exocytosis of intracellular compartments. This process is highly dynamic and numerous molecular players have been described to have a role during phagocytic cup formation. The precise regulation in time and space of all of these molecules, however, remains elusive. In addition, the last step of phagosome closure has been very difficult to observe because inhibition by RNA interference or dominant negative mutants often results in stalled phagocytic cup formation. 
We have set up a dedicated experimental approach using total internal reflection fluorescence microscopy (TIRFM) combined with epifluorescence to monitor step by step the extension of pseudopods and their tips in a phagosome growing around a particle loosely bound to a coverslip. This method allows us to observe, with high resolution the very tips of the pseudopods and their fusion during closure of the phagosome in living cells for two different fluorescently tagged proteins at the same time.

&quot;Phagosome Closure Assay&quot; to Visualize Phagosome Formation in Three Dimensions Using Total Internal Reflection Fluorescent Microscopy TIRFM

We describe an experimental setup to visualize with unprecedented high resolution phagosome formation and closure in three dimensions in living macrophages, using total internal reflection fluorescence microscopy. It allows monitoring of the base of the phagocytic cup, the extending pseudopods, as well as the precise site of phagosome scission.

&quot;Fagozomun Kapatma Deneyi&quot; kullanma Üç Boyutta fagozomun Formasyonu Visualize&#39;a Toplam İç Yansıma Floresan Mikroskobu (TIRFM)

Phagocytosis is a mechanism used by specialized cells to internalize and eliminate microorganisms or cellular debris. It relies on profound rearrangements ...

Visualization of Biofilm Formation in Candida albicans Using an Automated Microfluidic Device

Candida albicans is the most common fungal pathogen of humans, causing about 15% of hospital-acquired sepsis cases. A major virulence attribute of C. albicans is its ability to form biofilms, structured communities of cells attached to biotic and abiotic surfaces. C. albicans biofilms can form on host tissues, such as mucosal layers, and on medical devices, such as catheters, pacemakers, dentures, and joint prostheses. Biofilms pose significant clinical challenges because they are highly resistant to physical and chemical perturbations, and can act as reservoirs to seed disseminated infections. Various in vitro assays have been utilized to study C. albicans biofilm formation, such as microtiter plate assays, dry weight measurements, cell viability assays, and confocal scanning laser microscopy. All of these assays are single end-point assays, where biofilm formation is assessed at a specific time point. Here, we describe a protocol to study biofilm formation in real-time using an automated microfluidic device under laminar flow conditions. This method allows for the observation of biofilm formation as the biofilm develops over time, using customizable conditions that mimic those of the host, such as those encountered in vascular catheters. This protocol can be used to assess the biofilm defects of genetic mutants as well as the inhibitory effects of antimicrobial agents on biofilm development in real-time.

Visualization of Biofilm Formation in Candida albicans Using an Automated Microfluidic Device

This protocol describes the use of a customizable automated microfluidic device to visualize biofilm formation in Candida albicans under host physiological conditions.

Görselleştirme bir otomatik mikrosıvısal aygıtı kullanarak Candida albicans biyofilm oluşumu

Candida albicans is the most common fungal pathogen of humans, causing about 15% of hospital-acquired sepsis cases. A major virulence attribute of C. ...

Bile Salt-induced Biofilm Formation in Enteric Pathogens: Techniques for Identification and Quantification

Biofilm formation is a dynamic, multistage process that occurs in bacteria under harsh environmental conditions or times of stress. For enteric pathogens, a significant stress response is induced during gastrointestinal transit and upon bile exposure, a normal component of human digestion. To overcome the bactericidal effects of bile, many enteric pathogens form a biofilm hypothesized to permit survival when transiting through the small intestine. Here we present methodologies to define biofilm formation through solid-phase adherence assays as well as extracellular polymeric substance (EPS) matrix detection and visualization. Furthermore, biofilm dispersion assessment is presented to mimic the analysis of events triggering release of bacteria during the infection process. Crystal violet staining is used to detect adherent bacteria in a high-throughput 96-well plate adherence assay. EPS production assessment is determined by two assays, namely microscopy staining of the EPS matrix and semi-quantitative analysis with a fluorescently-conjugated polysaccharide binding lectin. Finally, biofilm dispersion is measured through colony counts and plating. Positive data from multiple assays support the characterization of biofilms and can be utilized to identify bile salt-induced biofilm formation in other bacterial strains.

This protocol enables the reader to analyze bile salt-induced biofilm formation in enteric pathogens using a multifaceted approach to capture the dynamic nature of bacterial biofilms by assessing adherence, extracellular polymeric substance matrix formation, and dispersion.

Enterik patojenler safra tuzu kaynaklı biyofilm oluşumu: kimlik ve miktar teknikleri

Biofilm formation is a dynamic, multistage process that occurs in bacteria under harsh environmental conditions or times of stress. For enteric pathogens, ...

A High-throughput Assay to Assess and Quantify Neutrophil Extracellular Trap Formation

Neutrophil extracellular traps (NETs) are immunogenic extracellular DNA structures that can be released by neutrophils upon a wide variety of triggers. NETs have been demonstrated to serve as an important host defense mechanism that traps and kills microorganisms. On the other hand, they have been implicated in diverse systemic autoimmune diseases. NETs are immunogenic and toxic structures that contain a pool of relevant autoantigens including anti-neutrophil cytoplasmic antibodies (ANCA)-associated vasculitis (AAV) and systemic lupus erythematosus (SLE). Different forms of NETs can be induced depending on the stimulus. The amount of NETs can be quantified using different techniques including measuring DNA release in supernatants, measuring DNA-complexed with NET-molecules like myeloperoxidase (MPO) or neutrophil elastase (NE), measuring the presence of citrullinated histones by fluorescence microscopy, or flow cytometric detection of NET-components which all have different features regarding their specificity, sensitivity, objectivity, and quantity. Here is a protocol to quantify ex vivo NET formation in a highly-sensitive, high-throughput manner by using three-dimensional immunofluorescence confocal microscopy. This protocol can be applied to address various research questions about NET formation and degradation in health and disease.

This protocol describes a highly sensitive and high throughput neutrophil extracellular trap (NET) assay for the semi-automated quantification of ex vivo NET formation by immunofluorescence three-dimensional confocal microscopy. This protocol can be used to evaluate NET formation and degradation after different stimuli and can be used to study potential NET-targeted therapies.

Nötrofil hücre dışı tuzak oluşumu ölçmek ve değerlendirmek için bir yüksek-den geçerek tahlil

Neutrophil extracellular traps (NETs) are immunogenic extracellular DNA structures that can be released by neutrophils upon a wide variety of triggers. ...