This study was supported by Cooperative Agreement Award AI075565 (to D.A.H.) from the National Institute of Allergy and Infectious Diseases and by the Wendy and Ken Ruby Fund for Excellence in Pediatric Urology Research. B.M.C. is the Judith and Robert Winston Chair in Pediatric Urology.

1. Functionalization of Electrochemical Sensors
<ol>
	<li>Prepare the thiolated capture probe at a concentration of 0.05 &mu;M in 300 &mu;M 1,6-hexanedithiol (HDT), 10 mM Tris-HCl, pH 8.0, 0.3 M NaCl, 1 mM EDTA and incubate in the dark at room temperature for 10 min. Incubation of the thiolated capture probe with HDT ensures that the thiol group on the capture probe is reduced, resulting in more consistent results.</li>
	<li>Apply a stream of nitrogen to bare gold 16 sensor array chip(s) for 5 sec to remove moisture an...

<ol>
	<li>Wu, J., Campuzano, S., Halford, C., Haake, D. A., Wang, J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Ternary+Surface+Monolayers+for+Ultrasensitive+(Zeptomole)+Amperometric+Detection+of+Nucleic+Acid+Hybridization+without+Signal+Amplification.">Ternary Surface Monolayers for Ultrasensitive (Zeptomole) Amperometric Detection of Nucleic Acid Hybridization without Signal Amplification.</a> Anal. Chem. 82, 8830-8837 (2010).</li><li>Halford, C., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Rapid+Antimicrobial+Susceptibility+Testing+by+Sensitive+Detection+of+Precursor+Ribosomal+RNA+Using+a+Novel+Electrochemical+Biosensing+Platform.">Rapid Antimicrobial Susceptibility Testing by Sensitive Detection of Precursor Ribosomal RNA Using a Novel Electrochemical Biosensing Platform.</a> Antimicrob. Agents Chemother. 56, (2012).</li><li>Campuzano, S., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Ternary+monolayers+as+DNA+recognition+interfaces+for+direct+and+sensitive+electrochemical+detection+in+untreated+clinical+samples.">Ternary monolayers as DNA recognition interfaces for direct and sensitive electrochemical detection in untreated clinical samples.</a> Biosens. Bioelectron. 26, 3577-3584 (2011).</li><li>Gau, V., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Electrochemical+molecular+analysis+without+nucleic+acid+amplification.">Electrochemical molecular analysis without nucleic acid amplification.</a> Methods. 37, 73-83 (2005).</li><li>Patel, M., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Target+Specific+Capture+Enhances+Sensitivity+of+Electrochemical+Detection+of+Bacterial+Pathogens.">Target Specific Capture Enhances Sensitivity of Electrochemical Detection of Bacterial Pathogens.</a> J. Clin. Microbiol. 49, 4293-4296 (2011).</li><li>Mastali, M., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Optimal+probe+length+and+target+location+for+electrochemical+detection+of+selected+uropathogens+at+ambient+temperature.">Optimal probe length and target location for electrochemical detection of selected uropathogens at ambient temperature.</a> J. Clin. Microbiol. 46, 2707-2716 (2008).</li><li>Liao, J. C., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Use+of+electrochemical+DNA+biosensors+for+rapid+molecular+identification+of+uropathogens+in+clinical+urine+specimens.">Use of electrochemical DNA biosensors for rapid molecular identification of uropathogens in clinical urine specimens.</a> J. Clin. Microbiol. 44, 561-570 (2006).</li><li>Liao, J. C., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Development+of+an+advanced+electrochemical+DNA+biosensor+for+bacterial+pathogen+detection.">Development of an advanced electrochemical DNA biosensor for bacterial pathogen detection.</a> J. Mol. Diagn. 9, 158-168 (2007).</li><li>Pedrero, M., Campuzano, S., Pingarron, J. M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Electroanalytical+sensors+and+devices+for+multiplexed+detection+of+foodborne+pathogen+microorganisms.">Electroanalytical sensors and devices for multiplexed detection of foodborne pathogen microorganisms.</a> Sensors (Basel). 9, 5503-5520 (2009).</li><li>Kuralay, F., Campuzano, S., Haake, D. A., Wang, J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Highly+sensitive+disposable+nucleic+acid+biosensors+for+direct+bioelectronic+detection+in+raw+biological+samples.">Highly sensitive disposable nucleic acid biosensors for direct bioelectronic detection in raw biological samples.</a> Talanta. 85, 1330-1337 (2011).</li><li>Ecker, D. J., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Ibis+T5000:+a+universal+biosensor+approach+for+microbiology.">Ibis T5000: a universal biosensor approach for microbiology.</a> Nat. Rev. Microbiol. 6, 553-558 (2008).</li><li>Casalta, J. P., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Evaluation+of+the+LightCycler+SeptiFast+test+in+the+rapid+etiologic+diagnostic+of+infectious+endocarditis.">Evaluation of the LightCycler SeptiFast test in the rapid etiologic diagnostic of infectious endocarditis.</a> Eur. J. Clin. Microbiol. Infect. Dis. 28, 569-573 (2009).</li></ol>

All authors are inventors on patents relevant to the methods described. One of these patents has been licensed to Qvella Corporation. B.M.C. and D.A.H. have equity interest in Qvella Corporation. V.G. is the President of GeneFluidics, which is the manufacturer of the electrochemical sensor array chip, chip mount, and chip reader described in this paper.

The electrochemical sensor assay described here enables rapid detection of nucleic acid targets. Sensitivity and specificity depend in part on the free energy of target-probe hybridization, which in turn depends on the length and GC content of the capture and detector probes. We typically perform the hybridization steps at ambient temperature (~20 &deg;C) 5, 6. However, the hybridization steps (3.2 and 3.3) can also be performed at higher temperatures in a hybridization oven if the chip is placed in a covered ...

Using rRNA as a target molecule for bacterial detection and identification has a number of advantages. The abundance of rRNA in bacterial cells provides for a sensitivity limit as low as 250 bacteria per milliliter without the need for target amplification 1. Bacterial rRNA contains unique species-specific sequences that are accessible to hybridization with DNA probes. Consequently, an array of electrochemical sensors can be used to identify unknown bacteria, where each sensor is functionalized with a different species-specific capture probe. Positive control sensors should be included for a synthetic oligonucleotide target that "bridges" the capture and detector probes to create an internal calibration signal.
Electrochemical sensors have a wide range of basic and translational research applications. For example, the assay described here has been used to precisely measure the effect of E. coli growth phase on rRNA and pre-rRNA copy numbers, which is of great interest to researchers interested in bacterial physiology 2. The sensitivity of the electrochemical sensor assay is determined by the signal to noise ratio. A variety of signal amplification and noise reduction methods have been explored. We find that improving the chemistry of the sensor surface is key to reducing nonspecific binding of detector probe and/or HRP enzyme. In particular, a mixed monolayer of alkanedithiols and mercaptohexanol has been found to reduce background by covering the electrode surface more completely while retaining accessibility of the capture probe for target hybridization 3. These surface chemistry treatments are particularly important for assays involving complex biological samples.

<table border="1">
 <tbody>
 <tr>
 <td>Name of the reagent</td>
 <td>Company</td>
 <td>Catalogue number</td>
 <td>Comments (optional)</td>
 </tr>
 <tr>
 <td>6-mercapto-1-hexanol (MCH)</td>
 <td>Sigma</td>
 <td>451088</td>
 <td>Store at room temperature</td>
 </tr>
 <tr>
 <td>1,6-hexanedithiol (HDT)</td>
 <td>Sigma</td>
 <td>H-12005</td>
 <td>Store at room temperature</td>
 </tr>
 <tr>
 <td>Thiolated capture probes</td>
 <td>Operon</td>
 <td>N/A</td>
 <td>Store at 100 &mu;M in 0.1x TE at -20 &deg;C</td>
 </tr>
 <tr>
 <td>Fluorescein-modified detector probes</td>
 <td>Operon</td>
 <td>N/A</td>
 <td>Store at 100 &mu;M in 0.1x TE at -20 &deg;C</td>
 </tr>
 <tr>
 <td>Bridging Oligonucleotide</td>
 <td>Operon</td>
 <td>N/A</td>
 <td>Store at 100 &mu;M in 0.1x TE at -20 &deg;C</td>
 </tr>
 <tr>
 <td>Anti-Fluorescein-HRP, Fab fragments</td>
 <td>Roche</td>
 <td>11 426 346 910</td>
 <td>Store at 4 &deg;C</td>
 </tr>
 <tr>
 <td>Helios Chip Reader</td>
 <td>GeneFluidics</td>
 <td>GFR-2009</td>
 <td></td>
 </tr>
 <tr>
 <td>Sensor Chip Mount</td>
 <td>GeneFluidics</td>
 <td>GFR-003</td>
 <td></td>
 </tr>
 <tr>
 <td>Film well sticker</td>
 <td>GeneFluidics</td>
 <td></td>
 <td>Shipped with sensor chips</td>
 </tr>
 <tr>
 <td>Bare gold 16-sensor array chips </td>
 <td>GeneFluidics</td>
 <td>SC1000-16X-B </td>
 <td>Store in 100% N2 at room temperature</td>
 </tr>
 <tr>
 <td>Bovine Serum Albumin </td>
 <td>Sigma</td>
 <td>A7906 </td>
 <td>Store at 4 &deg;C</td>
 </tr>
 <tr>
 <td>1M Phosphate Buffer, pH 7.2 </td>
 <td></td>
 <td></td>
 <td>0.35M NaH2PO4, 0.65M K2HPO4, adjusted to pH 7.2</td>
 </tr>
 <tr>
 <td>Blocker Casein in PBS </td>
 <td>Pierce</td>
 <td>37528 </td>
 <td>Dilute with an equal volume of 1M Phosphate Buffer, pH 7.2, store at 4 &deg;C</td>
 </tr>
 <tr>
 <td></td>
 <td></td>
 <td></td>
 <td>Table 1. Reagents and Equipment.</td>
 </tr>
 </tbody>
</table>

bacterial detection &amp; identification using electrochemical sensors

Electrochemical sensors are widely used for rapid and accurate measurement of blood glucose and can be adapted for detection of a wide variety of analytes. Electrochemical sensors operate by transducing a biological recognition event into a useful electrical signal. Signal transduction occurs by coupling the activity of a redox enzyme to an amperometric electrode. Sensor specificity is either an inherent characteristic of the enzyme, glucose oxidase in the case of a glucose sensor, or a product of linkage between the enzyme and an antibody or probe.
Here, we describe an electrochemical sensor assay method to directly detect and identify bacteria. In every case, the probes described here are DNA oligonucleotides. This method is based on sandwich hybridization of capture and detector probes with target ribosomal RNA (rRNA). The capture probe is anchored to the sensor surface, while the detector probe is linked to horseradish peroxidase (HRP). When a substrate such as 3,3',5,5'-tetramethylbenzidine (TMB) is added to an electrode with capture-target-detector complexes bound to its surface, the substrate is oxidized by HRP and reduced by the working electrode. This redox cycle results in shuttling of electrons by the substrate from the electrode to HRP, producing current flow in the electrode.

We describe an electrochemical assay that is structured similarly to a sandwich ELISA. As shown in Figure 1, target ribosomal RNA (rRNA) hybridization with capture and detector probes is developed by a redox reaction catalyzed by HRP conjugated to anti-fluorescein antibody fragments that bind to the 3' fluorescein linkage on the detector probe. An important component of assay sensitivity is the surface chemistry of the gold electrode. We have found that a ternary monolayer consisting of thiolated capture...

Watch this Scientific Journal Video about Bacterial Detection & Identification Using Electrochemical Sensors at JoVE.com

Bacterial Detection &amp; Identification Using Electrochemical Sensors

We describe an electrochemical sensor assay method for rapid bacterial detection and identification. The assay involves a sensor array functionalized with DNA oligonucleotide capture probes for ribosomal RNA (rRNA) species-specific sequences. Sandwich hybridization of target rRNA with the capture probe and a horseradish peroxidase-linked DNA oligonucleotide detector probe produces a measurable amperometric current.

Electrochemical  sensors are widely used for rapid and accurate measurement of blood glucose and  can be adapted for detection of a wide variety of ...

bacterial-detection-identification-using-electrochemical-sensors

Research

JoVE Journal

Bioengineering

28.0K Görüntüleme.  Veterans Affairs Greater Los Angeles Healthcare System. Biz hızlı bakteri bulunması ve belirlenmesi için bir elektrokimyasal sensör test yöntem açıklanmaktadır. Tahlil, ribozomal RNA (rRNA) türe özgü dizileri için DNA oligonükleotid probları yakalama fonksiyonuna sahip bir sensör dizisi içerir. Yakalama prob ve yaban turpu peroksidaz bağlı DNA oligonükleotid dedektör prob ile hedef rRNA Sandwich melezleme ölçülebilir bir amperometrik akım üretir.