Çeşitli video klipler, faz kontrast gösteren ve DIC mikroskopi başlıklı başka bir video-makale <a href="details.stp?ID=197">alınmıştır Symbiosis,</a> Katmanlar . Vallahi Leadbetter laboratuvarı tarafından yapılan bu katkı nezaketle kabul eder.

Bu deneysel bir yaklaşım için tam metin protokolü mevcuttur <a href="http://www.mrw.interscience.wiley.com/emrw/9780471143031/cp/cpcb/article/cb0401/current/abstract ">Hücre Biyolojisi Şu Protokolleri.</a>

The authors have nothing to disclose.

phase contrast and differential interference contrast (dic) microscopy

Faz-kontrast mikroskobu genellikle şeffaf olmayan, biyolojik örneklerin ışık emici kontrast üretmek için kullanılır. Teknik Zernike, 1942 yılında, onun başarısı için Nobel ödülü aldı tarafından keşfedildi. , Örnek yapısal detay kenarları vurgulamaktadır doku hücrelerinin, yumurta ve embriyolar da dahil olmak üzere, kalın kesitlerle yüksek çözünürlüklü optik bölümleri sağlar ve faz haleler tipik bir zarar vermez, çünkü 1960&#39;ların sonlarında piyasaya DIC mikroskopi, biyomedikal araştırma popüler oldu faz kontrastlı görüntüler. Bu protokol, bu mikroskopi teknikleri ilkeleri ve pratik uygulamalar vurgulamaktadır.

Watch this Scientific Journal Video about Phase Contrast and Differential Interference Contrast DIC Microscopy at JoVE.com

Phase Contrast and Differential Interference Contrast DIC Microscopy

Bu protokol, Faz ve Diferansiyel Girişim Kontrast ilkeleri ve pratik uygulamalar (DIC) Mikroskopi vurgulamaktadır

Faz Kontrast ve Diferansiyel Girişim Kontrast (DIC) Mikroskopi

Phase-contrast microscopy is often used to produce contrast for transparent, non light-absorbing, biological specimens. The technique was discovered by ...

phase-contrast-and-differential-interference-contrast-dic-microscopy

Research

JoVE Journal

Biology

Phase Contrast and Differential Interference Contrast (DIC) Microscopy

51.8K Görüntüleme.  University of Texas Health Science Center at San Antonio (UTHSCSA). Bu protokol, Faz ve Diferansiyel Girişim Kontrast ilkeleri ve pratik uygulamalar (DIC) Mikroskopi vurgulamaktadır

Video: Phase Contrast and Differential Interference Contrast DIC Microscopy

Labeling hESCs and hMSCs with Iron Oxide Nanoparticles for Non-Invasive in vivo Tracking with MR Imaging

In recent years, stem cell research has led to a better understanding of developmental biology, various diseases and its potential impact on regenerative medicine. A non-invasive method to monitor the transplanted stem cells repeatedly in vivo would greatly enhance our ability to understand the mechanisms that control stem cell death and identify trophic factors and signaling pathways that improve stem cell engraftment. MR imaging has been proven to be an effective tool for the in vivo depiction of stem cells with near microscopic anatomical resolution. In order to detect stem cells with MR, the cells have to be labeled with cell specific MR contrast agents. For this purpose, iron oxide nanoparticles, such as superparamagnetic iron oxide particles (SPIO), are applied, because of their high sensitivity for cell detection and their excellent biocompatibility. SPIO particles are composed of an iron oxide core and a dextran, carboxydextran or starch coat, and function by creating local field inhomogeneities, that cause a decreased signal on T2-weighted MR images. This presentation will demonstrate techniques for labeling of stem cells with clinically applicable MR contrast agents for subsequent non-invasive in vivo tracking of the labeled cells with MR imaging.

For the evaluation of new stem cell therapies it is important to non-invasively track the injected cells in vivo. This video will show you how to label human mesenchymal and embryonic stem cells with iron oxide based contrast agents in vivo for subsequent MR imaging in vivo.

Demir Oksit hESC ve hMSCs Etiketleme MR Görüntüleme in vivo Takip Non-Invasive Nanopartiküller

In recent years, stem cell research has led to a better understanding of developmental biology, various diseases and its potential impact on regenerative ...

Biyoloji

Labeling Stem Cells with Fluorescent Dyes for non-invasive Detection with Optical Imaging

Optical imaging (OI) is an easy, fast and inexpensive tool for in vivo monitoring of new stem cell based therapies. The technique is based on ex vivo labeling of stem cells with a fluorescent dye, subsequent intravenous injection of the labeled cells and visualization of their accumulation in specific target organs or pathologies. The presented technique demonstrates how we label human mesenchymal stem cells (hMSC) by simple incubation with the lipophilic fluorescent dye DiD (C67H103CIN2O3S) and how we label human embryonic stem cells (hESC) with the FDA approved fluorescent dye Indocyanine Green (ICG). The uptake mechanism is via adherence and diffusion of the lypophilic dye across the phospholipid cell membrane bilayer. The labeling efficiency is usually improved if the cells are incubated with the dye in serum-free media as opposed to incubation in serum-containing media. Furthermore, the addition of the transfection agent Protamine Sulfate significantly improves contrast agent uptake.

This video shows techniques for labeling of human embryonic stem cells and mesenchymal stem cells with fluorescent dyes. This technique can be used for an in vivo tracking of transplanted stem cells with optical imaging and for histopathological correlations with fluorescence microscopy.

Optik Görüntüleme ile non-invaziv Algılama için Floresan Boyalar Kök Hücreler Etiketleme

Optical imaging (OI) is an easy, fast and inexpensive tool for in vivo monitoring of new stem cell based therapies. The technique is based on ex vivo ...

RNAi Interference by dsRNA Injection into Drosophila Embryos

Genetic screening is one of the most powerful methods available for gaining insights into complex biological process 1. Over the years many improvements and tools for genetic manipulation have become available in Drosophila 2. Soon after the initial discovery by Frie and Mello 3 that double stranded RNA can be used to knockdown the activity of individual genes in Caenorhabditis elegans, RNA interference (RNAi) was shown to provide a powerful reverse genetic approach to analyze gene functions in Drosophila organ development 4, 5.
Many organs, including lung, kidney, liver, and vascular system, are composed of branched tubular networks that transport vital fluids or gases 6, 7. The analysis of Drosophila tracheal formation provides an excellent model system to study the morphogenesis of other tubular organs 8. The Berkeley Drosophila genome project has revealed hundreds of genes that are expressed in the tracheal system. To study the molecular and cellular mechanism of tube formation, the challenge is to understand the roles of these genes in tracheal development. Here, we described a detailed method of dsRNA injection into Drosophila embryo to knockdown individual gene expression. We successfully knocked down endogenous dysfusion(dys) gene expression by dsRNA injection. Dys is a bHLH-PAS protein expressed in tracheal fusion cells, and it is required for tracheal branch fusion 9, 10. dys-RNAi completely eliminated dys expression and resulted in tracheal fusion defect. This relatively simple method provides a tool to identify genes requried for tissure and organ development in Drosophila.

RNAi Interference by dsRNA Injection into Drosophila Embryos

RNA interference has been proven very effective to analyze gene function in Drosophila tracheal development. A detailed protocol used by Jiang lab to inject dsRNA into fly embryos to knockdown gene expression is illustrated. This technique has the potential for screening genes required for tissue and organ development in Drosophila.

DsRNA Enjeksiyon RNAi Girişim içine Drosophila Embriyolar

Genetic screening is one of the most powerful methods available for gaining insights into complex biological process 1. Over the years many improvements ...

Preparation, Purification, and Characterization of Lanthanide Complexes for Use as Contrast Agents for Magnetic Resonance Imaging

Polyaminopolycarboxylate-based ligands are commonly used to chelate lanthanide ions, and the resulting complexes are 
useful as contrast agents for magnetic resonance imaging (MRI). Many commercially available ligands are especially useful because they contain 
functional groups that allow for fast, high-purity, and high-yielding conjugation to macromolecules and biomolecules via amine-reactive 
activated esters and isothiocyanate groups or thiol-reactive maleimides. While metalation of these ligands is considered common 
knowledge in the field of bioconjugation chemistry, subtle differences in metalation procedures must be taken into account when 
selecting metal starting materials. Furthermore, multiple options for purification and characterization exist, and selection of the most 
effective procedure partially depends on the selection of starting materials. These subtle differences are often neglected in published 
protocols. Here, our goal is to demonstrate common methods for metalation, purification, and characterization of lanthanide complexes 
that can be used as contrast agents for MRI (Figure 1). We expect that this publication will enable biomedical scientists to incorporate 
lanthanide complexation reactions into their repertoire of commonly used reactions by easing the selection of starting materials and 
purification methods.

We demonstrate the metalation, purification, and characterization of lanthanide complexes. The complexes described here can be conjugated to macromolecules to enable tracking of these molecules using magnetic resonance imaging.

Manyetik Rezonans Görüntüleme için hazırlanması, Saflaştırılması ve lantanide Kompleksleri Kontrast Ajanlar Kullanım Karakterizasyonu

Polyaminopolycarboxylate-based ligands are commonly used to chelate lanthanide ions, and the resulting complexes are 
useful as contrast agents for ...

In vivo Clonal Tracking of Hematopoietic Stem and Progenitor Cells Marked by Five Fluorescent Proteins using Confocal and Multiphoton Microscopy

We developed and validated a fluorescent marking methodology for clonal tracking of hematopoietic stem and progenitor cells (HSPCs) with high spatial and temporal resolution to study in vivo hematopoiesis using the murine bone marrow transplant experimental model. Genetic combinatorial marking using lentiviral vectors encoding fluorescent proteins (FPs) enabled cell fate mapping through advanced microscopy imaging. Vectors encoding five different FPs: Cerulean, EGFP, Venus, tdTomato, and mCherry were used to concurrently transduce HSPCs, creating a diverse palette of color marked cells. Imaging using confocal/two-photon hybrid microscopy enables simultaneous high resolution assessment of uniquely marked cells and their progeny in conjunction with structural components of the tissues. Volumetric analyses over large areas reveal that spectrally coded HSPC-derived cells can be detected non-invasively in various intact tissues, including the bone marrow (BM), for extensive periods of time following transplantation. Live studies combining video-rate multiphoton and confocal time-lapse imaging in 4D demonstrate the possibility of dynamic cellular and clonal tracking in a quantitative manner.

In vivo Clonal Tracking of Hematopoietic Stem and Progenitor Cells Marked by Five Fluorescent Proteins using Confocal and Multiphoton Microscopy

Combinatorial 5 fluorescent proteins marking of hematopoietic stem and progenitor cells allows in vivo clonal tracking via confocal and two-photon microscopy, providing insights into bone marrow hematopoietic architecture during regeneration. This method allows non-invasive fate mapping of spectrally-coded HSPCs-derived cells in intact tissues for extensive periods of time following transplantation.

Eşodaklı ve multiphoton Mikroskopi kullanarak beş Floresan Proteinleri ile işaretlenmiş Hematopoetik kök hücrelerin in vivo klonal Takip

We developed and validated a fluorescent marking methodology for clonal tracking of hematopoietic stem and progenitor cells (HSPCs) with high spatial and ...

Larval RNA Interference in the Red Flour Beetle, Tribolium castaneum

The red flour beetle, Tribolium&#160;castaneum, offers a repertoire of experimental tools for genetic and developmental studies, including a fully annotated genome sequence, transposon-based transgenesis, and effective RNA interference (RNAi). Among these advantages, RNAi-based gene knockdown techniques are at the core of Tribolium research. T. castaneum show a robust systemic RNAi response, making it possible to perform RNAi at any life stage by simply injecting double-stranded RNA (dsRNA) into the beetle&#8217;s body cavity.
In this report, we provide an overview of our larval RNAi technique in T. castaneum. The protocol includes (i) isolation of the proper stage of T. castaneum larvae for injection, (ii) preparation for the injection setting, and (iii) dsRNA injection. Larval RNAi is a simple, but powerful technique that provides us with quick access to loss-of-function phenotypes, including multiple gene knockdown phenotypes as well as a series of hypomorphic phenotypes. Since virtually all T. castaneum tissues are susceptible to extracellular dsRNA, the larval RNAi technique allows researchers to study a wide variety of tissues in diverse contexts, including the genetic basis of organismal responses to the outside environment. In addition, the simplicity of this technique stimulates more student involvement in research, making T. castaneum an ideal genetic system for use in a classroom setting.

Larval RNA Interference in the Red Flour Beetle, Tribolium castaneum

RNA interference (RNAi)-based gene knockdown techniques are at the core of Tribolium research. Here, we provide an overview of our larval RNAi technique in Tribolium castaneum. Larval RNAi is a simple, but powerful technique that provides quick access to loss-of-function phenotypes, allowing researchers to study gene functions in diverse contexts.

Kırmızı Un Beetle Larva RNA Girişim,<em&gt; Tribolium castaneum</em

The red flour beetle, Tribolium&#160;castaneum, offers a repertoire of experimental tools for genetic and developmental studies, including a fully ...

Sperm Collection of Differential Quality Using Density Gradient Centrifugation

In sexual reproduction, a male gamete or sperm cell fuses with a female gamete to bring about fertilization. However, a large number of sperm cells with fertilizing ability are required to interact with a female gamete to ensure fertilization. As such, the fertilizing ability of individual sperm cells is critical for successful reproduction. Density gradient centrifugation has been utilized for several decades as a reproducible, fast, efficient, effective and extremely adaptable method to collect only high-quality sperm to be used in assisted reproductive technology. The protocols we described herein focus on the utilization of the discontinuous Percoll density gradient centrifugation (PDGC) technique to isolate three distinct populations of rooster sperm by their quality. We were able to collect low-, medium- and high-quality sperm. We also describe reproducible protocols that entail determining fertility potential of sperm by assessing their viability, mobility and penetrability. Collection of sperm by their quality using PDGC technique would be useful to accurately and thoroughly characterize sperm with differential fertility potential.

In this paper, we aim to describe the performance of the density gradient centrifugation technique and its application in sperm physiology research.

Sperm yoğunluğu degrade Santrifüjü kullanarak fark kalitesini topluluğu

In sexual reproduction, a male gamete or sperm cell fuses with a female gamete to bring about fertilization. However, a large number of sperm cells with ...

Biological Sample Preparation by High-pressure Freezing, Microwave-assisted Contrast Enhancement, and Minimal Resin Embedding for Volume Imaging

The described sample preparation technique is designed to combine the best quality of ultrastructural preservation with the most suitable contrast for the imaging modality in a focused ion beam scanning electron microscope (FIB-SEM), which is used to obtain stacks of sequential images for 3D reconstruction and modelling. High-pressure freezing (HPF) allows close to native structural preservation, but the subsequent freeze substitution often does not provide sufficient contrast, especially for a bigger specimen, which is needed for high-quality imaging in the SEM required for 3D reconstruction. Therefore, in this protocol, after the freeze substitution, additional contrasting steps are carried out at room temperature. Although these steps are performed in a microwave, it is also possible to follow traditional bench processing, which requires longer incubation times.The subsequent embedding in minimal amounts of resin allows for faster and more precise targeting and preparation inside the FIB-SEM. This protocol is especially useful for samples that require preparation by high-pressure freezing for a reliable ultrastructural preservation but do not gain enough contrast during the freeze substitution for volume imaging using FIB-SEM. In combination with the minimal resin embedding, this protocol provides an efficient workflow for the acquisition of high-quality volume data.

Here we present a protocol for combining two sample processing techniques, high-pressure freezing and microwave-assisted sample processing, followed by minimal resin embedding for acquiring data with a focused ion beam scanning electron microscope (FIB-SEM). This is demonstrated using a mouse tibial nerve sample and Caenorhabditis elegans.

Yüksek basınç dondurucu, mikrodalga destekli kontrast geliştirme ve en az reçine birim görüntüleme için katıştırma tarafından biyolojik örnek hazırlama

The described sample preparation technique is designed to combine the best quality of ultrastructural preservation with the most suitable contrast for the ...

Graphene Enclosure of Chemically Fixed Mammalian Cells for Liquid-Phase Electron Microscopy

A protocol is described for investigating the human epidermal growth factor receptor 2 (HER2) in the intact plasma membrane of breast cancer cells using scanning transmission electron microscopy (STEM). Cells of the mammalian breast cancer cell line SKBR3 were grown on silicon microchips with silicon nitride (SiN) windows. Cells were chemically fixed, and HER2 proteins were labeled with quantum dot nanoparticles (QDs), using a two-step biotin-streptavidin binding protocol. The cells were coated with multilayer graphene to maintain a hydrated state, and to protect them from electron beam damage during STEM. To examine the stability of the samples under electron beam irradiation, a dose series experiment was performed. Graphene-coated and non-coated samples were compared. Beam induced damage, in the form of bright artifacts, appeared for some non-coated samples at increased electron dose D, while no artifacts appeared on coated samples.

Presented here is a protocol for labeling membrane proteins in mammalian cells and coating the sample with graphene for liquid-phase scanning transmission electron microscopy. The stability of the samples against the damage caused by radiation can also studied with this protocol.

Sıvı Fazlı Elektron Mikroskobu için Kimyasal Olarak Sabit Memeli Hücrelerinin Grafen Muhafazası

A protocol is described for investigating the human epidermal growth factor receptor 2 (HER2) in the intact plasma membrane of breast cancer cells using ...

Cryo-Electron Microscopic Grid Preparation for Time-Resolved Studies using a Novel Robotic System, Spotiton

The capture of short-lived molecular states triggered by the early encounter of two or more interacting particles continues to be an experimental challenge of great interest to the field of cryo-electron microscopy (cryo-EM). A few methodological strategies have been developed that support these &#34;time-resolved&#34; studies, one of which, Spotiton-a novel robotic system-combines the dispensing of picoliter-sized sample droplets with precise temporal and spatial control. The time-resolved Spotiton workflow offers a uniquely efficient approach to interrogate early structural rearrangements from minimal sample volume. Fired from independently controlled piezoelectric dispensers, two samples land and rapidly mix on a nanowire EM grid as it plunges toward the cryogen. Potentially hundreds of grids can be prepared in rapid succession from only a few microliters of a sample. Here, a detailed step-by-step protocol of the operation of the Spotiton system is presented with a focus on troubleshooting specific problems that arise during grid preparation.

The protocol presented here describes the use of Spotiton, a novel robotic system, to deliver two samples of interest onto a self-wicking, nanowire grid that mix for a minimum of 90 ms prior to vitrification in liquid cryogen.