We give special thanks to Yves Couder for many helpful discussions. We thank Atef Asnacios for the calibration of the cantilevers and discussion. We thank Lisa Willis, Elliot Meyerowitz, and Oliver Hamant&#160;for critical reading. This work was funded in part by Human Frontier Science Program grant RGP0062/2005-C; the Agence Nationale de la Recherche projects &#8216;&#8216;Growpec,&#8217;&#8217; and &#8216;&#8216;Mechastem&#8217;&#8217;.

1. Prepare Glass Slides for Mounting Sample
<ol>
	<li>Prepare imbedding agarose media: 0.7% low melting agarose in 10% mannitol (in water).</li>
	<li>Using a strong metal instrument (e.g. drill tip, lime), etch out a 0.5 x 0.5 cm area in the center&#160;of a microscopy glass slide. Or instead, glue a small piece of glass lamella&#160;(about 20 x 200 &#181;m)&#160;to the glass slide&#160;using Araldite glue. NOTE: This roughens the surface in order to facilitate the adhesion of the agarose to ensure that the agarose media sticks or fixes to the slide. This slide can be reused.</li>
	<li>Position a droplet of about 20 &#181;l&#160;of imbedding agarose media onto the etched region of the glass slide. This gives a thin film of agarose.</li>
	<li>Store the glass slide in a humid box and wait for the agarose media to solidify.</li>
</ol>
2. Dissecting and Mounting Meristem Samples
<ol>
	<li>Microdissect meristems for confocal imaging: remove the floral buds one by one from the stem by pulling them down with ultra fine tweezers. It is important to remove all the floral buds up to the buds that do not exhibit sepals (i.e. the P1 primordia14).</li>
	<li>Using a razor blade or the tip of the tweezers, cut the meristem away from the stem. The cut should be parallel to the region of the meristem surface that is to be measured with the AFM. The obtained apex should be between 300 &#181;m and 600 &#181;m high to fit under the AFM tip.</li>
	<li>Push the apex into the film of agarose media prepared at step 1.1.4. Choose a position on the glass slide/agarose and push gently such that the meristem is both directly in contact with the glass slide and protrudes out from the agarose. It is crucial to position the meristem in the agarose within the few seconds that follow its cut from the stem. NOTE: This is in order to prevent the meristem from drying. At this stage, the meristem will be standing in a crack because the agarose fractured upon the application of pressure.</li>
	<li>Prepare several meristems this way for batch imaging, providing that they are of the same height and are positioned less than 500 &#181;m from one another on the slide. Keep the prepared meristems in the humid box while dissecting further samples. 
	NOTE: It limits the variation coming from the calibration. Ideally 2 samples of each condition could be prepared and measured randomly. So far there is no observed effect of batch imaging on the measurement (stress induced response). This could be thanks to the dilution of stress signalling molecules in the agar and/or the mounting solution. Alternatively the stress response is the same regardless to the amount of sample prepared.</li>
	<li>Before moving on to the next step, make sure that the boundary between the meristem and the floral buds is dry. If not, gently remove the excess water using filter paper. This should prevent in the next stage that the melted agarose floods the sample due to capillarity forces.</li>
	<li>With a 20 &#181;l&#160;pipette, add enough melted mounting agarose to fill in the crack created at step 1.2.3. and to surround each meristem. The agarose should reach the level of the scar of the removed flower bud (primordium). To achieve this, it may be necessary to add agarose at each end of the crack.</li>
	<li>When the agarose is added, it will quickly flood into the crack; using the pipette, suck off part of the melted mounting agarose to ensure that the meristem is the highest point on the slide. This fixes the meristem so that it cannot move during imaging.</li>
</ol>
3. Mounting Root or Hypocotyl Samples
<ol>
	<li>For roots and hypocotyls, no dissection is necessary. In the thin film of agarose on the prepared glass slide, make a groove either directly above an etch in the glass or along a glass lamella. Position the root or hypocotyl in this groove ensuring that it is in contact with the glass along its whole length.</li>
	<li>Before moving on to the next step, make sure that the sample is dry at its surface. If not, gently remove the excess of water using filter paper.</li>
	<li>Add melted mounting agarose around the sample as in step 1.2.6.</li>
</ol>
4. AFM Preparation and Sensitivity Calibration (for a JPK Nanowizard AFM)
<ol>
	<li>Mount a cantilever on the AFM. The cantilever should be mounted with round shaped indenter. The radius will determine the x,&#160;y, z&#160;resolution and the indentation depth at which accurate measurement could be archived.
	<ol>
		<li>To take meso&#8212;nanoscale measurements at the epidermis&#8217;s surface, use a 50 nm radius round indenter; to take mesoscale measurements, use a 0.5 &#181;m radius round indenter; to take microscale measurements (across 2-3 cells), use a 2.5 &#181;m radius round indenter.</li>
	</ol>
	</li>
	<li>Position the laser at the tip of the cantilever. Align the laser to the middle of the captor using the mirror.</li>
	<li>Position a clean glass under the AFM. 
	NOTE: the following is set to transform the signal of the laser position on the AFM receptor into a deformation of the cantilever and, by evaluating the spring constant of the cantilever, to translate it into a force.</li>
	<li>Approach with a target force &#8220;set point&#8221; of 1 V.</li>
	<li>Select &#8220;force spectroscopy&#8221;. Do an indentation by setting the maximal &#8220;relative set point&#8221; to 2 V, the &#8220;extend speed&#8221; to 40 &#181;m/sec, and the &#8220;z length&#8221; to 5 &#181;m.</li>
	<li>From the &#8220;calibration manager&#8221; menu, select the linear part of the forward curve to fit the sensitivity using the &#8220;select fit range&#8221; button. The &#8220;relative set point&#8221; should be transformed from &#8220;volt&#8221; to &#8220;meter&#8221;.</li>
	<li>From the &#8220;calibration manager&#8221; menu, select &#8220;spring constant&#8221; to evaluate the elasticity of the cantilever using thermal fluctuations. Press &#8220;run&#8221; to obtain the spectral density plot of the cantilever. Find the resonance peak with the lowest frequency. Fit it using the &#8220;select fit range&#8221; button. 
	NOTE 1: For more details on the thermal fluctuations tuning, read Cook&#160;et al.15 
	NOTE 2: It is preferable to use a direct method to evaluate the elasticity of the cantilever using a reference cantilever (or material with known stiffness). The one used here was kindly donated by Atef Asnacios16.</li>
	<li>Add 200 &#181;l&#160;of 10% mannitol solution under the cantilever tip. Realign the laser to the middle of the captor using the mirror.</li>
	<li>Recalibrate the sensitivity: from the &#8220;calibration manager&#8221; menu, click on the &#8220;unknown&#8221; button; repeat steps 2.3 through to 2.5.</li>
</ol>
5. Data Acquisition: Apparent Young&#8217;s Modulus Cartography
<ol>
	<li>Position the mounted samples under the AFM and add a 500 &#181;l&#160;droplet of 10% mannitol solution onto the sample. The mannitol solution plasmolyzes the cells within minutes.</li>
	<li>Approach with a target force (&#8220;set point&#8221;) of 20 nN (&#8220;set point&#8221; should not be more than 3 V)</li>
	<li>Indent with a &#8220;relative set point&#8221; of 200 nN, an &#8220;extend speed&#8221; of 40 &#181;m/sec, and &#8220;z&#160;length&#8221; of 5 &#181;m.</li>
	<li>Adjust the &#8220;relative set point&#8221; in order to obtain an indentation of 100 nm for the 200 nm mounted cantilever or 0.5 &#181;m for the 1 &#181;m/5 &#181;m mounted cantilever.</li>
	<li>In &#8220;force mapping&#8221; mode, select a region to scan: for meristems, 70&#160;&#181;m&#160;x 70 &#181;m with a resolution (&#8220;pixels&#8221;) of 64 x 64; for hypocotyls and roots, 100 &#181;m&#160;x 100 &#181;m with a resolution of 64 x 64.</li>
	<li>Press scan to launch the experiments. Save the output.</li>
</ol>
6. Data Analysis: Apparent Young&#8217;s Modulus Calculations
<ol>
	<li>Open the data file in the data analysis software.</li>
	<li>Select &#8220;batch processing&#8221; to apply the same analysis to all the curves of a single map.</li>
	<li>Select &#8220;correct the height for the bending of the cantilever&#8221; so to extract the indentation depth.</li>
	<li>Select &#8220;Young&#8217;s modulus fit function&#8221; that will assume the force is proportional to the area of indentation. Set the &#8220;tip shape&#8221; to parabolic to assume that the indentation shape is a parabolic.</li>
	<li>Indicate the radius of the tip.</li>
	<li>Select preferentially the &#8220;retract&#8221; curve for the analysis because it is less sensitive to topography than the &#8220;extend&#8221; curve. However, if there is significant sticking of the probe during the &#8220;retract,&#8221; use the &#8220;extend&#8221; curve, which is insensitive to sticking.</li>
	<li>Set the Poisson ratio to 0.5. Press on analyze and save the output.</li>
</ol>

<ol>
	<li>Cosgrove, D. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Measuring+in+vitro+extensibility+of+growing+plant+cell+walls.">Measuring in vitro extensibility of growing plant cell walls.</a> Methods in molecular biology. 715, 291-303 (2011).</li><li>Durachko, D. M., Cosgrove, D. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Measuring+plant+cell+wall+extension+(creep)+induced+by+acidic+pH+and+by+alpha-expansin.">Measuring plant cell wall extension (creep) induced by acidic pH and by alpha-expansin.</a> Journal of visualized experiments : JoVE. , 1263 (2009).</li><li>Durachko, D. a. n. i. e. l. M., C, D. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Measuring+Plant+Cell+Wall+Extension+(Creep)+Induced+by+Acidic+pH+and+by+Alpha-Expansin.">Measuring Plant Cell Wall Extension (Creep) Induced by Acidic pH and by Alpha-Expansin.</a> J. Vis. Exp.. , 25 (2009).</li><li>Suslov, D., Verbelen, J. P., Vissenberg, K. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Onion+epidermis+as+a+new+model+to+study+the+control+of+growth+anisotropy+in+higher+plants.">Onion epidermis as a new model to study the control of growth anisotropy in higher plants.</a> Journal of experimental botany. 60, 4175-4187 (2009).</li><li>Parre, E., Geitmann, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Pectin+and+the+role+of+the+physical+properties+of+the+cell+wall+in+pollen+tube+growth+of+Solanum+chacoense.">Pectin and the role of the physical properties of the cell wall in pollen tube growth of Solanum chacoense.</a> Planta. 220, 582-592 (2005).</li><li>Zerzour, R., Kroeger, J., Geitmann, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Polar+growth+in+pollen+tubes+is+associated+with+spatially+confined+dynamic+changes+in+cell+mechanical+properties.">Polar growth in pollen tubes is associated with spatially confined dynamic changes in cell mechanical properties.</a> Developmental biology. 334, 437-446 (2009).</li><li>Radotic, K., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Atomic+force+microscopy+stiffness+tomography+on+living+Arabidopsis+thaliana+cells+reveals+the+mechanical+properties+of+surface+and+deep+cell-wall+layers+during+growth.">Atomic force microscopy stiffness tomography on living Arabidopsis thaliana cells reveals the mechanical properties of surface and deep cell-wall layers during growth.</a> Biophysical journal. 103, 386-394 (2012).</li><li>Milani, P., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=In+vivo+analysis+of+local+wall+stiffness+at+the+shoot+apical+meristem+in+Arabidopsis+using+atomic+force+microscopy.">In vivo analysis of local wall stiffness at the shoot apical meristem in Arabidopsis using atomic force microscopy.</a> The Plant journal : for cell and molecular biology. 67, 1116-1123 (2011).</li><li>Peaucelle, A., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Pectin-induced+changes+in+cell+wall+mechanics+underlie+organ+initiation+in+Arabidopsis.">Pectin-induced changes in cell wall mechanics underlie organ initiation in Arabidopsis.</a> Current biology : CB. 21, 1720-1726 (2011).</li><li>Braybrook, S. A., Hofte, H., Peaucelle, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Probing+the+mechanical+contributions+of+the+pectin+matrix:+Insights+for+cell+growth.">Probing the mechanical contributions of the pectin matrix: Insights for cell growth.</a> Plant signaling &amp; behavior. 7, 1037-1041 (2012).</li><li>Routier-Kierzkowska, A. L., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Cellular+force+microscopy+for+in+vivo+measurements+of+plant+tissue+mechanics.">Cellular force microscopy for in vivo measurements of plant tissue mechanics.</a> Plant physiology. 158, 1514-1522 (2012).</li><li>Agudelo, C. G., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=TipChip:+a+modular,+MEMS-based+platform+for+experimentation+and+phenotyping+of+tip-growing+cells.">TipChip: a modular, MEMS-based platform for experimentation and phenotyping of tip-growing cells.</a> The Plant journal : for cell and molecular biology. 73, 1057-1068 (2013).</li><li>Miedes, E., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Xyloglucan+endotransglucosylase/hydrolase+(XTH)+overexpression+affects+growth+and+cell+wall+mechanics+in+etiolated+Arabidopsis+hypocotyls.">Xyloglucan endotransglucosylase/hydrolase (XTH) overexpression affects growth and cell wall mechanics in etiolated Arabidopsis hypocotyls.</a> Journal of experimental botany. 64, 2481-2497 (2013).</li><li>Byrne, M. E., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Asymmetric+leaves1+mediates+leaf+patterning+and+stem+cell+function+in+Arabidopsis.">Asymmetric leaves1 mediates leaf patterning and stem cell function in Arabidopsis.</a> Nature. 408, 967-971 (2000).</li><li>Cook, S. M., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Practical+implementation+of+dynamic+methods+for+measuring+atomic+force+microscope+cantilever+spring+constants.">Practical implementation of dynamic methods for measuring atomic force microscope cantilever spring constants.</a> Nanotechnology. 17, 20135-22145 (2006).</li><li>Desprat, N., Richert, A., Simeon, J., Asnacios, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Creep+function+of+a+single+living+cell.">Creep function of a single living cell.</a> Biophysical journal. 88, 2224-2233 (2005).</li><li>Peaucelle, A., Braybrook, S., Hofte, H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Cell+wall+mechanics+and+growth+control+in+plants:+the+role+of+pectins+revisited.">Cell wall mechanics and growth control in plants: the role of pectins revisited.</a> Frontiers in plant science. 3, 121 (2012).</li><li>Mittler, R., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=ROS+signaling:+the+new+wave.">ROS signaling: the new wave.</a> Trends in plant science. 16, 300-309 (2011).</li><li>Braybrook, S. A., Peaucelle, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Mechano-chemical+aspects+of+organ+formation+in+Arabidopsis+thaliana:+the+relationship+between+auxin+and+pectin.">Mechano-chemical aspects of organ formation in Arabidopsis thaliana: the relationship between auxin and pectin.</a> PLoS. 8, e57813 (2013).</li><li>Asnacios, A., Hamant, O. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+mechanics+behind+cell+polarity.">The mechanics behind cell polarity.</a> Trends in cell biology. 22, 584-591 (2012).</li><li>Meister, A., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=FluidFM:+combining+atomic+force+microscopy+and+nanofluidics+in+a+universal+liquid+delivery+system+for+single+cell+applications+and+beyond.">FluidFM: combining atomic force microscopy and nanofluidics in a universal liquid delivery system for single cell applications and beyond.</a> Nano letters. 9, 2501-2507 (2009).</li><li>Lintilhac, P. M., Wei, C., Tanguay, J. J., Outwater, J. O. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Ball+tonometry:+a+rapid,+nondestructive+method+for+measuring+cell+turgor+pressure+in+thin-walled+plant+cells.">Ball tonometry: a rapid, nondestructive method for measuring cell turgor pressure in thin-walled plant cells.</a> Journal of plant growth regulation. 19, 90-97 (2000).</li><li>Kroeger, J. H., Zerzour, R., Geitmann, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Regulator+or+driving+force?+The+role+of+turgor+pressure+in+oscillatory+plant+cell+growth.">Regulator or driving force? The role of turgor pressure in oscillatory plant cell growth.</a> PloS one. 6, e18549 (2011).</li><li>Forouzesh, E., Goel, A., Mackenzie, S. A., Turner, J. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=In+vivo+extraction+of+Arabidopsis+cell+turgor+pressure+using+nanoindentation+in+conjunction+with+finite+element+modeling.">In vivo extraction of Arabidopsis cell turgor pressure using nanoindentation in conjunction with finite element modeling.</a> The Plant journal : for cell and molecular biology. 73, 509-520 (2013).</li></ol>

The authors have nothing to disclose.

In plants, changing mechanical properties play a major role in directing growth and morphogenesis. To date there has been great progress in unraveling the genetic and chemical networks that control plant growth, but our knowledge of how these networks contribute to and are affected by changes in mechanical properties is rudimentary. This method should enable us to fill this gap, and so it should be of strong interest to scientists studying any aspect of plant growth or morphogenesis. We now summarize the challenges and l...

Growth in plants is achieved by the coordinated expansion of the rigid cell walls that surround each and every cell of the organism. Accumulating evidence indicates that it is through the modification of cell wall chemistry that plants locally control this expansion. The expansion is thought to be driven primarily by strain on the cell walls, caused by the cell&#8217;s high turgor pressure; this strain response to turgor pressure is governed by the mechanical properties of the cell walls1. Little is known of these mechanical properties and how they change during development. Furthermore little is known of how these mechanical properties are controlled and whether feedbacks contribute to alter cell wall chemistry in a manner that is apparently coordinated across a tissue. If we are to understand the connection between chemical and mechanical changes in plant cell walls during development, and ultimately how these microscopic interactions govern a plant&#8217;s macroscopic growth, a method that can monitor mechanical properties of cell walls in developing organs at the cellular or tissue scale is required.
The atomic force microscopy (AFM) method described here, which is based on micrometer or nanometer tissue compressions or indentations, was developed precisely to measure the mechanical properties of cell walls in developing organs simultaneously at subcellular resolutions and across entire regions of tissue. Other methods have either a resolution that is too low or too high: the extensometer is only able to measure the average mechanical properties of a whole tissue at the millimeter&#160;scale2-4, a scale that is for instance too large to measure early events in organogenesis; the microindenter can take measurements at subcellular resolution at the nanometer&#160;scale, but it is restricted to measuring isolated cells and not groups of cells or organs5-7. With the AFM, the required tissue, cellular, and subcellular resolutions can be achieved8-10. Recently several protocols have been&#160;developed specifically to measure mechanics of plants tissue that could also be used11,12.
We will present here how to evaluate the elasticity of the tissue through measurement of the apparent Young&#8217;s modulus13.
The Young modulus is commonly used to describe the stiffness of a material. During small deformation the force required to deform a material is proportional to the area of indentation. The Young modulus is this coefficient. In the case of a continuous homogenous material the same coefficient will be measured regardless of the indentation type (size and shape) but will change with the speed of the measurement. In the case of the complex structure of plants tissue, we have observed so far that the force is proportional to the deformation allowing the determination of a coefficient of proportionality that we name &#8220;apparent young modulus&#8221;. In contrast from continuous medias in the plants, this apparent young modulus is sensitive to the size of the indentation. It does not correspond to the young moduli of a pure cell wall. It best describes the elasticity of the scaffolding of the cell-wall of the tissue.

<table border="0" cellpadding="0" cellspacing="0" width="850">
	<tbody>
		<tr height="21">
			<td height="21" style="height:21px;width:216px;">AFM</td>
			<td style="width:348px;">JPK</td>
			<td style="width:119px;">NanoWizard</td>
			<td style="width:167px;">All the 3-generation are abele to do the work withe the same preferment</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:216px;">AFM stage</td>
			<td style="width:348px;">JPK</td>
			<td style="width:119px;">CellHesion</td>
			<td>Required for sample withe low topography (les then 11&#181;m between the lowest and the highest point in the aria of force scanning).</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:216px;">AFM optics</td>
			<td style="width:348px;">JPK</td>
			<td style="width:119px;">Top View Optics&#160;</td>
			<td>Very important in order to position the sample. Cold be replaces by long range a binocular or microscope</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:216px;">Stereo Microscopes&#160;</td>
			<td style="width:348px;">Leica</td>
			<td style="width:119px;">M125</td>
			<td>Any type of stereo microscopes could do.&#160;</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:216px;"></td>
			<td style="width:348px;"></td>
			<td style="width:119px;"></td>
			<td></td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:216px;">150nm mounted cantilever&#160;</td>
			<td style="width:348px;">nanosensors Rue Jaquet-Droz 1Case Postale 216 CH-2002 Neuchatel Switzerland</td>
			<td style="width:119px;">R150-NCL-10</td>
			<td>To measure only the cell wall at the surface of the epidermis use</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;">1&#181;m mounted cantilever&#160;</td>
			<td style="width:348px;">nanosensors Rue Jaquet-Droz 1Case Postale 216 CH-2002 Neuchatel Switzerland</td>
			<td>SD-Sphere-NCH-S-10&#160;</td>
			<td>to measure the mechanics of the cell wall orthogonal to the surface of the epidermis</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:216px;">Tipless cantiliver</td>
			<td style="width:348px;">nanosensors Rue Jaquet-Droz 1Case Postale 216 CH-2002 Neuchatel Switzerland</td>
			<td>TL-NCH-20&#160;</td>
			<td>to measure the local mechanics of the tissue (2-3 cell wide) use a 5&#181;m mounted cantilever. We attached a 5&#181;m borasilicate bead to a tipless cantiliver</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:216px;">5&#181;m silicon microspheres</td>
			<td style="width:348px;">Corpuscular</td>
			<td style="width:119px;">C-SIO-5</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:216px;">Aradilte&#160;</td>
			<td style="width:348px;">Bartik S.A. 77170 Coubet France</td>
			<td style="width:119px;"></td>
			<td>Aradilte for fixing the bead to the tip les cantiliver</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:216px;"></td>
			<td style="width:348px;"></td>
			<td style="width:119px;"></td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:216px;">&#160;low melting Agarows</td>
			<td style="width:348px;">Fishersci Fair Lawn , new jersey 07410</td>
			<td style="width:119px;">BP160-100</td>
			<td>34-45 Gelation Temperature</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:216px;">D-Mannitol</td>
			<td style="width:348px;">Sigma-Aldrich, 3050 Spruce Street, St Louis Mo 63103 USA)</td>
			<td style="width:119px;">M4125-500G</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:216px;"></td>
			<td style="width:348px;"></td>
			<td style="width:119px;"></td>
			<td></td>
		</tr>
		<tr height="24">
			<td height="24" style="height:24px;">2&#160; Stainless Steel No. 5 Tweezers</td>
			<td style="width:348px;">Ideal-Tek 6828 Balerna Switzerland&#160;</td>
			<td align="right">951199</td>
			<td></td>
		</tr>
	</tbody>
</table>

afm-based mapping of the elastic properties of cell walls: at tissue, cellular, and subcellular resolutions

We describe a recently developed method to measure mechanical properties of the surfaces of plant tissues using atomic force microscopy (AFM) micro/nano-indentations, for a JPK&#160;AFM. Specifically, in this protocol we measure the apparent Young&#8217;s modulus of cell walls at subcellular resolutions across regions of up to 100 &#181;m&#160;x 100 &#181;m in floral meristems, hypocotyls, and roots. This requires careful preparation of the sample, the correct selection of micro-indenters and indentation depths. To account for cell wall properties only, measurements are performed in highly concentrated solutions of mannitol in order to plasmolyze the cells and thus remove the contribution of cell turgor pressure.
In contrast to other extant techniques, by using different indenters and indentation depths, this method allows simultaneous multiscale measurements, i.e. at subcellular resolutions and across hundreds of cells comprising a tissue. This means that it is now possible&#160;to spatially-temporally characterize the changes that take place in the mechanical properties of cell walls during development, enabling these changes to be correlated with growth and differentiation. This represents a key step to understand how coordinated microscopic cellular changes bring about macroscopic morphogenetic events.
However, several limitations remain: the method can only be used on fairly small samples (around 100 &#181;m in diameter) and only on external tissues; the method is sensitive to tissue topography; it measures only certain aspects of the tissue&#8217;s complex mechanical properties. The technique is being developed rapidly and it is likely that most of these limitations will be resolved in the near future.

In Figure 1 we present typical Young moduli maps of floral meristems (Figures 1A and 1B), young and old hypocotyls (Figures 1C-F), and root meristem (Figure 1G and 1H). In all experiments the indenter is hemispherical, but its radius differs so that different spatial resolutions can be achieved. Figures 1C and 1D show typical results for meso-nanoscale indenters (50 nm radius) with meso-...

Watch this Scientific Journal Video about AFM-based Mapping of the Elastic Properties of Cell Walls: at Tissue, Cellular, and Subcellular Resolutions at JoVE.com

AFM-based Mapping of the Elastic Properties of Cell Walls: at Tissue, Cellular, and Subcellular Resolutions

We describe a method to map mechanical properties of plant tissues using an atomic force microscope (AFM). We focus on how to record mechanical changes that take place in cell walls during plant development at wide-field mesoscale, enabling these changes to be correlated with growth and morphogenesis.

We describe a recently developed method to measure mechanical properties of the surfaces of plant tissues using atomic force microscopy (AFM) ...

afm-based-mapping-elastic-properties-cell-walls-at-tissue-cellular

Research

JoVE Journal

Biology

12.8K Views.  Université Paris Diderot. We describe a method to map mechanical properties of plant tissues using an atomic force microscope (AFM). We focus on how to record mechanical changes that take place in cell walls during plant development at wide-field mesoscale, enabling these changes to be correlated with growth and morphogenesis.