This research was supported by the ISRAEL SCIENCE FOUNDATION (grant no. 1023/18).

1. Design of microarray
NOTE: DNA probes represent custom 36-nucleotide sequences, consisting of the recognition site for T7 DNA primase (GTC) located between two variable flanking regions, followed by a constant 24-nucleotide sequence tethered to a glass slide3. We used a 4 x 180,000 microarray format, which enabled spotting of each DNA sequence in six replicates, randomly distributed on the slide.
<ol>
	<li>Design of DNA library for primases with known recognition sequences 
	<ol>
		<li>Ensure that each sequence is composed of 60 nucleotides. Keep the first 24 nucleotides constant (to be attached to the glass slide). Variable regions should have the following general form: (N)16GTC(N)17; where N represents any desired nucleotide.</li>
		<li>Design the flanking region to address a specific scientific question (an example of the design is presented in the following text). The flanking regions may be designed to contain specific features such as the repeat elements or specific symmetry. 
		NOTE: We have created eight categories of different flanking sequences composed of two or three specific nucleotides: T and G (group 1); T and C (group 2); C and A (group 3); A and G (group 4); G, C and T (group 5); C, T and A (group 6); G, A and T (group 7); G, A and C (group 8). 2,000 different sequences were designed for each group. Each group had subgroups of sequences with different types and different numbers of sequence repeats.</li>
		<li>Include a set of negative control sequences (lacking the specific binding site)4. The presence of such sequences allows to validate the occurrence of specific binding in the experiment.</li>
	</ol>
	</li>
	<li>Design of DNA library for primases with unknown recognition sequences 
	<ol>
		<li>If the recognition sequence is unknown, create the DNA library by selecting the sequences (with or without specific features mentioned previously) from the genome of desired organism (bacteria, fungi, etc.).</li>
	</ol>
	</li>
	<li>Design of microarray slide 
	<ol>
		<li>Purchase custom slides (e.g., 4x180K, AMADID #78366) from a commercial supplier (for more details see Table of Materials). Order each sequence in six replicates, where each replicate should be attached to a randomly selected spot on the slide.</li>
	</ol>
	</li>
</ol>
2. Primase DNA binding experiment
NOTE: The day before (or at least 2 h before) the PBM, prepare the blocking solution [2% w/v skim milk in phosphate buffer saline (PBS)] and stir it on a magnetic stirrer. Prior to use, filter the solution with a 0.45 &#181;M filter. To detect the primase binding to the DNA strands, several steps should be performed in the following order.
<ol>
	<li>Blocking procedure 
	<ol>
		<li>Pre-wet the microarray slide in a Coplin jar with 0.01% v/v Triton X-100 in PBS (5 min at 125 rpm on a lab rotator).</li>
		<li>Briefly wash the gasket slide (also referred to as coverslip) with water and ethanol and dry using compressed air.</li>
		<li>Assemble bottom part of steel hybridization chamber (PBM chamber) with the gasket slide facing up (commercial label facing up). For more details regarding the assembly, refer to the Table of Materials.</li>
		<li>Pipet blocking solution (2% w/v skim milk in PBS) into each chamber.</li>
		<li>Remove the microarray slide from the Coplin jar, then dry the non-DNA side (the DNA should be on the same side as the company label) and edges using a fine wipe. Slowly place the microarray on the gasket slide, avoiding bubbles (company label facing down). Immediately assemble and tighten steel hybridization chamber apparatus. Incubate for 1 h at room temperature (RT).</li>
		<li>Fill one staining dish (the &#8220;PBS&#8221; dish) with 800 mL of fresh PBS. Fill a second staining dish (the &#8220;WASH&#8221; dish) with 800 mL of freshly prepared 0.5% v/v Tween-20 in PBS.</li>
		<li>Unscrew the PBM chamber and remove the microarray slide-coverslip &#8220;sandwich&#8221;, taking care not to break the seal. Disassemble it underwater in the WASH dish by placing forceps between the slide and coverslip.</li>
		<li>Shake the microarray slide underwater and quickly transfer to a Coplin jar.</li>
		<li>Wash once with 0.1% v/v Tween-20 in PBS (5 min at 125 rpm on a lab rotator).</li>
		<li>Wash once with 0.01% v/v Triton X-100 in PBS (2 min at 125 rpm on a lab rotator).</li>
		<li>Quickly transfer the slide to a Coplin jar containing PBS.</li>
	</ol>
	</li>
	<li>Protein binding 
	<ol>
		<li>Assemble the PBM chamber as previously described (steps 2.1.2&#8211;2.1.3).</li>
		<li>Pipette protein binding mixture containing 5 &#181;M T7 DNA primase, 30 mM Tris-HCl pH 7.5, 6.5 mM MgCl2, 30 mM K-glutamate, 6 mM dithiothreitol (DTT), 65 &#956;M ribonucleoside triphosphate (rNTP), 2% w/v skim milk, 100 ng/&#956;L bovine serum albumin (BSA), 50 ng/&#956;L salmon testes DNA, and 0.02% v/v Triton X-100 (TX-100) into each chamber of the gasket slide (without touching the rubber sides and without introducing bubbles).</li>
		<li>Rinse the microarray slide briefly by dipping it in the PBS dish, which removes excess detergent from the surface of the slides. Wipe the non-DNA surfaces of the slide with a fine wipe.</li>
		<li>Slowly lower the microarray slide (facing down) onto gasket slide, being careful to prevent leakage from one chamber to another. Immediately assemble and tighten PBM chamber apparatus without introducing bubbles. If bubbles do form, they can be removed by gently tapping the steel chamber against a hard surface.</li>
		<li>Incubate for 30 min at room temperature (RT).</li>
	</ol>
	</li>
	<li>Fluorescent antibody attachment
	<ol>
		<li>Unscrew the PBM chamber and remove the microarray slide-coverslip &#8220;sandwich&#8221;, taking care not to break the seal. Disassemble underwater in the WASH dish using forceps. Shake the slide underwater and quickly transfer to a Coplin jar containing PBS.</li>
		<li>Assemble the PBM chamber with gasket slide as previously described (steps 2.1.2&#8211;2.1.3).</li>
		<li>Add Alexa 488-conjugated anti-his antibody (10 ng/&#956;L in binding buffer) to the gasket slide.</li>
		<li>Rinse the slide briefly by dipping it in PBS dish as before, then remove the slide from PBS slowly, wipe the non-DNA surface and place it facing down onto gasket slide.</li>
		<li>Incubate 30 min at RT in the dark (fluorescence probe is light- sensitive) to reduce photo-bleaching.</li>
		<li>Disassemble the PBM chamber and coverslip as before, removing the coverslip underwater in the WASH dish.</li>
		<li>Rinse the slides briefly by dipping them in the PBS dish. Dry the slides with compressed air. Store in the dark in a slide box until ready to scan.</li>
	</ol>
	</li>
	<li>Scanning the microarray slide 
	<ol>
		<li>Scan the chip by using microarray scanner (refer to Table of Materials) with excitation of 495 nm and emission of 519 nm and collect the median fluorescence intensity.</li>
	</ol>
	</li>
</ol>
3. Microarray data analysis
NOTE: All data processing was performed using custom written scripts in MATLAB.
<ol>
	<li>Perform the initial PBM data processing using Wilcoxon rank sum test p-value as described previously4.</li>
	<li>Use the median value of the binding intensity for each DNA sequence for further analysis.</li>
	<li>Next, using the one-way ANOVA p-values, compare statistical significance of the observed differences in primase-DNA binding intensities obtained for different groups of DNA probes, as explained above in the DNA library design section3.</li>
</ol>
4. Template-directed RNA synthesis catalyzed by T7 DNA primase
<ol>
	<li>Preparation of denaturing polyacrylamide gel
	<ol>
		<li>To prepare 100 mL of gel mixture, combine 62.5 mL of 40% acrylamide-bisacrylamide (19:1), 42 g of urea, 1.1 g of Tris base (2-Amino-2-(hydroxymethyl)-1,3-propanediol), 0.55 g of boric acid, and 0.4 mL of 0.5 M ethylenediaminetetraacetic acid (EDTA) solution.</li>
		<li>Divide the mixture into 14 mL aliquots (the amount needed for one gel of 16.5 cm x 26 cm x 0.03 cm) and keep them protected from light at 4 &#176;C for up to 1 month.</li>
		<li>To prepare one denaturing polyacrylamide gel, add 4 &#181;L of TEMED and 40 &#181;L of 10% w/v ammonium persulfate to 14 mL of the previously prepared mixture, cast it, and leave it to polymerize for at least 2 h at RT. The gel can be kept for one day at 4 &#176;C.</li>
	</ol>
	</li>
	<li>Sample preparation 
	NOTE: Keep the reagents, reaction mixture, and samples on ice.
	<ol>
		<li>To prepare the reaction mixture required for ten reactions combine 11 &#181;L of 5x activity buffer (200 mM Tris-HCl, pH = 7.5; 50 mM dithiothreitol, 250 mM potassium glutamate, 50 mM MgCl2), 5.5 &#181;L of 2.5 mM mixture of nucleotide tri-phosphate (NTPs), and 5.5 &#181;L of radiolabeled ribonucleotide [e.g., ATP, (&#945;-32P) 3000 Ci/mmol]. 
		NOTE: All amounts have been increased by 10% due to possible pipetting errors. Radiolabeled ribonucleotides should be diluted according to the strength of radioactive signal (initial dilution is usually 1:10 or more).</li>
		<li>Transfer 2 &#181;L of the reaction mixture to ten PCR tubes.</li>
		<li>Add 1 &#181;L of 100 &#181;M DNA template to the corresponding PCR tube and spin down.</li>
		<li>Add 2 &#181;L of 16 &#181;M T7 DNA primase, spin down, mix gently, and spin down again.</li>
		<li>Incubate the reaction at RT for 20 min.</li>
		<li>Stop the reaction by adding 5 &#181;L of quenching solution (95% formamide, 20 mM EDTA, 0.05% w/v xylene cyanol and bromophenol blue), mix, and spin down.</li>
	</ol>
	</li>
	<li>Separation of RNA products by electrophoresis through denaturing polyacrylamide gel and subsequent signal detection
	<ol>
		<li>Pre-run the gel for 1 h (10 mA, 600 V) in 1x TBE buffer (90 mM Tris-borate, 2 mM EDTA).</li>
		<li>Load up to 2 &#181;L of each sample and perform electrophoresis (20 mA, 1100 V) in 1x TBE buffer (90 mM Tris-borate, 2 mM EDTA).</li>
		<li>Dry the gel for 2 h at 80 &#176;C under a vacuum.</li>
		<li>Expose the phosphor imaging plate to radioactive gel for a few hours to overnight, depending on the strength of radioactive signal.</li>
		<li>Record the signal (photostimulated luminescence) by using phosphorimager (see Table of Materials).</li>
	</ol>
	</li>
</ol>

<ol>
	<li>Berger, M. F., Bulyk, M. L. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Protein+binding+microarrays+(PBMs)+for+rapid,+high-throughput+characterization+of+the+sequence+specificities+of+DNA+binding+proteins.">Protein binding microarrays (PBMs) for rapid, high-throughput characterization of the sequence specificities of DNA binding proteins.</a> Methods in Molecular Biology. 338, 245-260 (2006).</li><li>Berger, M. F., Bulyk, M. L. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Universal+protein-binding+microarrays+for+the+comprehensive+characterization+of+the+DNA-binding+specificities+of+transcription+factors.">Universal protein-binding microarrays for the comprehensive characterization of the DNA-binding specificities of transcription factors.</a> Nature Protocols. 4 (3), 393-411 (2009).</li><li>Afek, A., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=DNA+Sequence+Context+Controls+the+Binding+and+Processivity+of+the+T7+DNA+Primase.">DNA Sequence Context Controls the Binding and Processivity of the T7 DNA Primase.</a> iScience. 2, 141-147 (2018).</li><li>Afek, A., Schipper, J. L., Horton, J., Gordan, R., Lukatsky, D. B. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Protein-DNA+binding+in+the+absence+of+specific+base-pair+recognition.">Protein-DNA binding in the absence of specific base-pair recognition.</a> Proceedings of the Nationaly Academy of Sciences of the Unitet States of America. 111 (48), 17140-17145 (2014).</li><li>Frick, D. N., Richardson, C. C. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Interaction+of+bacteriophage+T7+gene+4+primase+with+its+template+recognition+site.">Interaction of bacteriophage T7 gene 4 primase with its template recognition site.</a> Journal of Biological Chemistry. 274 (50), 35889-35898 (1999).</li><li>Tabor, S., Richardson, C. C. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Template+recognition+sequence+for+RNA+primer+synthesis+by+gene+4+protein+of+bacteriophage+T7.">Template recognition sequence for RNA primer synthesis by gene 4 protein of bacteriophage T7.</a> Proceedings of the Nationaly Academy of Sciences of the Unitet States of America. 78 (1), 205-209 (1981).</li><li>Fried, M., Crothers, D. M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Equilibria+and+kinetics+of+lac+repressor-operator+interactions+by+polyacrylamide+gel+electrophoresis.">Equilibria and kinetics of lac repressor-operator interactions by polyacrylamide gel electrophoresis.</a> Nucleic Acids Research. 9 (23), 6505-6525 (1981).</li><li>Galas, D. J., Schmitz, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=DNAse+footprinting:+a+simple+method+for+the+detection+of+protein-DNA+binding+specificity.">DNAse footprinting: a simple method for the detection of protein-DNA binding specificity.</a> Nucleic Acids Research. 5 (9), 3157-3170 (1978).</li><li>Jost, J. P., Munch, O., Andersson, T. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Study+of+protein-DNA+interactions+by+surface+plasmon+resonance+(real+time+kinetics).">Study of protein-DNA interactions by surface plasmon resonance (real time kinetics).</a> Nucleic Acids Research. 19 (10), 2788 (1991).</li><li>Bowen, B., Steinberg, J., Laemmli, U. K., Weintraub, H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+detection+of+DNA-binding+proteins+by+protein+blotting.">The detection of DNA-binding proteins by protein blotting.</a> Nucleic Acids Research. 8 (1), 1-20 (1980).</li><li>Oliphant, A. R., Brandl, C. J., Struhl, K. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Defining+the+sequence+specificity+of+DNA-binding+proteins+by+selecting+binding+sites+from+random-sequence+oligonucleotides:+analysis+of+yeast+GCN4+protein.">Defining the sequence specificity of DNA-binding proteins by selecting binding sites from random-sequence oligonucleotides: analysis of yeast GCN4 protein.</a> Molecular Cell Biology. 9 (7), 2944-2949 (1989).</li><li>Marmorstein, R., Fitzgerald, M. X. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Modulation+of+DNA-binding+domains+for+sequence-specific+DNA+recognition.">Modulation of DNA-binding domains for sequence-specific DNA recognition.</a> Gene. 304, 1-12 (2003).</li></ol>

The authors declare no conflict of interest.

The PBM method has been widely used to investigate binding properties of transcription factors and can also be applied to DNA processing enzymes, such as DNA primase, that bind to DNA with low affinity. However, certain modifications of experimental procedures are required. The microarray experiment involves several steps: design of the DNA library, preparation of the chip, binding of the protein target, fluorescent labeling, and scanning. Mild washing steps are critical, since the long washes with solutions containing d...

HTPP makes use of DNA binding microarray technology combined with biochemical analysis (Figure 1) to statistically identify specific features of DNA templates that affect the enzymatic activity of DNA primase. Therefore, HTPP provides a technological platform that facilitates a knowledge leap in the field. The classical tools used to determine primase recognition sites do not have the ability to yield massive amount of data, whereas HTPP does.
PBM is a technique routinely used to determine the binding preferences of transcription factors to DNA1,2; however, it is not suitable for detection of weak/transient binding of proteins to DNA. Unlike the universal PBM that provides information about average protein binding specificity to all possible sequences consisting of eight base pairs, HTPP is based on the library of single-stranded DNA templates comprising unique sequence elements. Such DNA sequence elements involve tens of thousands short (few tens of bp) genomic sequences, as well as computationally designed DNA sequences enriched in certain DNA repetitive sequence elements present in the genome, which possess different average GC content. Such a high-throughput approach allows determination of, in a systematic, quantitative, and hypothesis-driven way, the sequence-related properties that are important for primase binding and its enzymatic activity3. In particular, the important link between primase-DNA binding preferences, (modulated by DNA sequences flanking specific tri-nucleotide binding sites) and primase processivity has been identified for this enzymatic system4.
The new technology was applied to revisit our understanding of primase recognition sites even for the T7 DNA primase that has been extensively studied5. Specifically, re-examination of classical concepts, such as DNA recognition sites of T7 DNA primase (which were determined almost four decades ago 6) using protein-DNA binding microarray (PBM) has led to unprecedented insight into features related to the flanking sequence of these recognition sites3. It was expected that the sequences flanking tri-nucleotide recognition site of T7 DNA primase (5&#39;-GTC-3&#39;) will be random. Instead, we found that TG-rich flanking sequences increase the chances of T7 DNA primase to synthesize longer RNA primers indicating an increase in processivity.
Other methods that can be used to study DNA-binding properties of proteins in vitro include the electrophoretic mobility shift assay (EMSA)7, DNase I footprinting8, surface-plasmon resonance (SPR)9, and Southwestern blotting10. These are, however, low-throughput methods only applicable to investigating a small number of DNA sequences. In addition, the precision and sensitivity of some of these techniques (e.g., EMSA) is low. On the other hand, in vitro selection11 is a technique that, similarly to PBM, can be used for the identification of numerous binding sequences. However, low affinity sequences are usually excluded in most applications of in vitro selection; therefore, this approach is not suitable for obtaining comparative binding data for all available sequences. The universal PBM1,2 is mainly used to characterize the binding specificities of transcription factors from prokaryotes and eukaryotes as well as specific factors (e.g., presence of certain ligands, cofactors, etc.) that may affect this interaction12.
HTPP expands the PBM application to DNA processing enzymes by combining unprecedented high-throughput statistical power with high precision to provide information on binding sequence context. Such data has not yet been obtained for primases and related enzymes (that have weak/transient binding to DNA) due to aforementioned technical limitations of other available techniques.

<table><tbody><tr><td>40% acrylamide-bisacrylamide (19:1) solution</td><td>Merck</td><td>1006401000</td><td></td></tr><tr><td>95% formamide</td><td>Sigma-Aldrich</td><td>F9037-100ML</td><td></td></tr><tr><td>Alexa 488-conjugated anti-his antibody</td><td>Qiagen</td><td>35310</td><td></td></tr><tr><td>Ammonuium persulfate (APS)</td><td>Sigma-Aldrich</td><td>A3678-100G</td><td></td></tr><tr><td>ATP, [&amp;alpha;-32P] &amp;ndash; 3000 Ci/mmol</td><td>Perkin Elmer</td><td>NEG003H250UC</td><td></td></tr><tr><td>Boric acid, granular</td><td>Glentham Life Sciences</td><td>GE4425</td><td></td></tr><tr><td>Bovine Serum Albumin (BSA)</td><td>Roche</td><td>10735094001</td><td></td></tr><tr><td>Bromophenol blue</td><td>Sigma-Aldrich</td><td>B0126-25G</td><td></td></tr><tr><td>Coplin jar</td><td></td><td></td><td></td></tr><tr><td>Dithiothreitol (DTT)</td><td>Sigma-Aldrich</td><td>D0632-25G</td><td></td></tr><tr><td>DNA microarray</td><td>Agilent</td><td></td><td>4x180K (AMADID #78366)&lt;br/&gt; https://www.agilent.com</td></tr><tr><td>Ethylenediaminetetraacetic acid (EDTA)</td><td>Acros Organics</td><td>AC118430010</td><td></td></tr><tr><td>Fujifilm FLA-5100 phosphorimager</td><td>FUJIFILM Life Science</td><td></td><td></td></tr><tr><td>Glass slide staining rack</td><td>Thermo Scientific</td><td>12869995</td><td>If several slides are used</td></tr><tr><td>Lab rotator</td><td>Thermo Scientific</td><td>88880025</td><td></td></tr><tr><td>Magnesium chloride</td><td>Sigma-Aldrich</td><td>63064-500G</td><td></td></tr><tr><td>Microarray Hybridization Chamber</td><td>Agilent</td><td>G2534A</td><td>https://www.agilent.com/cs/library/usermanuals/Public/G2534-90004_HybridizationChamber_User.pdf</td></tr><tr><td>Microarray scanner (GenePix 4400A)</td><td>Molecular Devices</td><td></td><td></td></tr><tr><td>Phosphate Buffered Saline (PBS)</td><td>Sigma-Aldrich</td><td>P4417-100TAB</td><td></td></tr><tr><td>Potassium glutamate</td><td>Alfa Aesar</td><td>A172232</td><td></td></tr><tr><td>Ribonucleotide Solution Mix (rNTPs)</td><td>New England BioLabs</td><td>N0466S</td><td></td></tr><tr><td>Salmon testes DNA</td><td>Sigma-Aldrich</td><td>D1626-1G</td><td></td></tr><tr><td>Skim milk powder</td><td>Sigma-Aldrich</td><td>70166-500G</td><td></td></tr><tr><td>Staining dish</td><td>Thermo Scientific</td><td>12657696</td><td></td></tr><tr><td>Tetramethylethylenediamine (TEMED)</td><td>Bio-Rad</td><td>1610800</td><td></td></tr><tr><td>Tris base (2-Amino-2-(hydroxymethyl)-1,3-propanediol)</td><td>Sigma-Aldrich</td><td>93362-500G</td><td></td></tr><tr><td>Triton X-100</td><td>Sigma-Aldrich</td><td>X100-500ML</td><td></td></tr><tr><td>Tween-20</td><td>Sigma-Aldrich</td><td>P9416-50ML</td><td></td></tr><tr><td>Urea</td><td>Sigma-Aldrich</td><td>U6504-1KG</td><td></td></tr><tr><td>Xylene cyanol</td><td>Alfa Aesar</td><td>B21530</td><td></td></tr></tbody></table>

dna sequence recognition by dna primase using high-throughput primase profiling

DNA primase synthesizes short RNA primers that initiate DNA synthesis of Okazaki fragments on the lagging strand by DNA polymerase during DNA replication. The binding of prokaryotic DnaG-like primases to DNA occurs at a specific trinucleotide recognition sequence. It is a pivotal step in the formation of Okazaki fragments. Conventional biochemical tools that are used to determine the DNA recognition sequence of DNA primase provide only limited information. Using a high-throughput microarray-based binding assay and consecutive biochemical analyses, it has been shown that 1) the specific binding context (flanking sequences of the recognition site) influences the binding strength of the DNA primase to its template DNA, and 2) stronger binding of primase to the DNA yields longer RNA primers, indicating higher processivity of the enzyme. This method combines PBM and primase activity assay and is designated as high-throughput primase profiling (HTPP), and it allows characterization of specific sequence recognition by DNA primase in unprecedented time and scalability.&#160;

This technological advance for mapping the primase binding sites allows the obtaining of DNA binding properties that are difficult, if not impossible, to observe using classical tools. More importantly, HTPP enables the revisiting of the traditional understanding of primase binding sites. Specifically, HTPP reveals binding specificities in addition to known 5&#39;-GTC-3&#39; recognition sequences, which leads to changes in functional activities of T7 DNA primase. Namely, two groups of seq...

Watch this Scientific Journal Video about DNA Sequence Recognition by DNA Primase Using High-Throughput Primase Profiling at JoVE.com

DNA Sequence Recognition by DNA Primase Using High-Throughput Primase Profiling

Protein binding microarray (PBM) experiments combined with biochemical assays link the binding and catalytic properties of DNA primase, an enzyme that synthesizes RNA primers on template DNA. This method, designated as high-throughput primase profiling (HTPP), can be used to reveal DNA-binding patterns of a variety of enzymes.

DNA primase synthesizes short RNA primers that initiate DNA synthesis of Okazaki fragments on the lagging strand by DNA polymerase during DNA replication. ...

dna-sequence-recognition-dna-primase-using-high-throughput-primase

Research

JoVE Journal

Biochemistry

8.6K Views.  Ben-Gurion University of the Negev. Protein binding microarray (PBM) experiments combined with biochemical assays link the binding and catalytic properties of DNA primase, an enzyme that synthesizes RNA primers on template DNA. This method, designated as high-throughput primase profiling (HTPP), can be used to reveal DNA-binding patterns of a variety of enzymes.

Video: DNA Sequence Recognition by DNA Primase Using High-Throughput Primase Profiling

Rare Event Detection Using Error-corrected DNA and RNA Sequencing

Conventional next-generation sequencing techniques (NGS) have allowed for immense genomic characterization for over a decade. Specifically, NGS has been used to analyze the spectrum of clonal mutations in malignancy. Though far more efficient than traditional Sanger methods, NGS struggles with identifying rare clonal and subclonal mutations due to its high error rate of ~0.5&#8211;2.0%. Thus, standard NGS has a limit of detection for mutations that are &#62;0.02 variant allele fraction (VAF). While the clinical significance for mutations this rare in patients without known disease remains unclear, patients treated for leukemia have significantly improved outcomes when residual disease is &#60;0.0001 by flow cytometry. In order to mitigate this artefactual background of NGS, numerous methods have been developed. Here we describe a method for Error-corrected DNA and RNA Sequencing (ECS), which involves tagging individual molecules with both a 16 bp random index for error-correction and an 8 bp patient-specific index for multiplexing. Our method can detect and track clonal mutations at variant allele fractions (VAFs) two orders of magnitude lower than the detection limit of NGS and as rare as 0.0001 VAF.

Next-generation sequencing (NGS) is a powerful tool for genomic characterization that is limited by the high error rate of the platform (~0.5&#8211;2.0%). We describe our methods of error-corrected sequencing that allow us to obviate the NGS error rate and detect mutations at variant allele fractions as rare as 0.0001.

Conventional next-generation sequencing techniques (NGS) have allowed for immense genomic characterization for over a decade. Specifically, NGS has been ...

Genetics

Novel Sequence Discovery by Subtractive Genomics

Subtractive genomics can be used in any research where the goal is to identify the sequence of a gene, protein, or general region that is embedded in a larger genomic context. Subtractive genomics enables a researcher to isolate a target sequence of interest (T) by comprehensive sequencing and subtracting out known genetic elements (reference, R). The method can be used to identify novel sequences such as mitochondria, chloroplasts, viruses, or germline restricted chromosomes, and is particularly useful when T cannot be easily isolated from R. Beginning with the comprehensive genomic data (R + T), the method uses Basic Local Alignment Search Tool (BLAST) against a reference sequence, or sequences, to remove the matching known sequences (R), leaving behind the target (T). For subtraction to work best, R should be a relatively complete draft that is missing T. Since sequences remaining after subtraction are tested through quantitative Polymerase Chain Reaction (qPCR), R does not need to be complete for the method to work. Here we link computational steps with experimental steps into a cycle that can be iterated as needed, sequentially removing multiple reference sequences and refining the search for T. The advantage of subtractive genomics is that a completely novel target sequence can be identified even in cases in which physical purification is difficult, impossible, or expensive. A drawback of the method is finding a suitable reference for subtraction and obtaining T-positive and negative samples for qPCR testing. We describe our implementation of the method in the identification of the first gene from the germline-restricted chromosome of zebra finch. In that case computational filtering involved three references (R), sequentially removed over three cycles: an incomplete genomic assembly, raw genomic data, and transcriptomic data.

The purpose of this protocol is to use a combination of computational and bench research to find novel sequences that cannot be easily separated from a co-purifying sequence, which may be only partially known.

Subtractive genomics can be used in any research where the goal is to identify the sequence of a gene, protein, or general region that is embedded in a ...

Probing RNA Structure with Dimethyl Sulfate Mutational Profiling with Sequencing In Vitro and in Cells

The role of RNA structure in virtually any biological process has become increasingly evident, especially in the past decade. However, classical approaches to solving RNA structure, such as RNA crystallography or cryo-EM, have failed to keep up with the rapidly evolving field and the need for high-throughput solutions. Mutational profiling with sequencing using dimethyl sulfate (DMS) MaPseq is a sequencing-based approach to infer the RNA structure from a base&#39;s reactivity with DMS. DMS methylates the N1 nitrogen in adenosines and the N3 in cytosines at their Watson-Crick face when the base is unpaired. Reverse-transcribing the modified RNA with the thermostable group II intron reverse transcriptase (TGIRT-III) leads to the methylated bases being incorporated as mutations into the cDNA. When sequencing the resulting cDNA and mapping it back to a reference transcript, the relative mutation rates for each base are indicative of the base&#39;s &#34;status&#34; as paired or unpaired. Even though DMS reactivities have a high signal-to-noise ratio both in vitro and in cells, this method is sensitive to bias in the handling procedures. To reduce this bias, this paper provides a protocol for RNA treatment with DMS in cells and with in vitro transcribed RNA.

Probing RNA Structure with Dimethyl Sulfate Mutational Profiling with Sequencing In Vitro and in Cells

The protocol provides instruction for modifying RNA with dimethyl sulfate for mutational profiling experiments. It includes in vitro and in vivo probing with two alternative library preparation methods.

The role of RNA structure in virtually any biological process has become increasingly evident, especially in the past decade. However, classical ...

Precision DNAzyme Nanomachines for Discriminative RNA and DNA Analysis

DNAzyme 10-23 - Based Nanomachines for Nucleic Acid Recognition

DNAzyme-based nanomachines (DNM) for the detection of DNA and RNA sequences (analytes) are multifunctional structures made of oligonucleotides. Their functions include tight analyte binding, highly selective analyte recognition, fluorescent signal amplification by multiple catalytic cleavages of a fluorogenic reporter substrate, and fluorogenic substrate attraction for an increase in sensor response. Functional units are attached to a common DNA scaffold for their cooperative action. The RNA-cleaving 10-23 DNMs feature&#160;improved sensitivity in comparison with non-catalytic hybridization probes. The stability of the DNM and the increased chances of substrate recognition are provided&#160;by a double-stranded DNA fragment,&#160;a tile. DNM can differentiate two analytes with a single nucleotide difference in a folded RNA and a double-stranded DNA and detect analytes at concentrations ~1000 times lower than other protein-free hybridization probes. This article presents the concept behind the diagnostic potential of DNA-nanomachine activity and overviews DNM design, assembly, and application&#160;in nucleic acid detection assays.

Author Spotlight: Advancements in DNA Nanosensors &#8211; Addressing Sensitivity and Selectivity Challenges in Molecular Detection

The DNAzyme-based nanomachines can be used for highly selective and sensitive detection of nucleic acids. This article describes a detailed protocol for the design of DNAzyme-based nanomachines with a 10-23 core using free software and their application in the detection of an Epstein-Barr virus fragment as an example.

DNAzyme-based nanomachines (DNM) for the detection of DNA and RNA sequences (analytes) are multifunctional structures made of oligonucleotides. Their ...

Pyrosequencing for Microbial Identification and Characterization

Pyrosequencing is a versatile technique that facilitates microbial genome sequencing that can be used to identify bacterial species, discriminate bacterial strains and detect genetic mutations that confer resistance to anti-microbial agents. The advantages of pyrosequencing for microbiology applications include rapid and reliable high-throughput screening and accurate identification of microbes and microbial genome mutations. Pyrosequencing involves sequencing of DNA by synthesizing the complementary strand a single base at a time, while determining the specific nucleotide being incorporated during the synthesis reaction. The reaction occurs on immobilized single stranded template DNA where the four deoxyribonucleotides (dNTP) are added sequentially and the unincorporated dNTPs are enzymatically degraded before addition of the next dNTP to the synthesis reaction. Detection of the specific base incorporated into the template is monitored by generation of chemiluminescent signals. The order of dNTPs that produce the chemiluminescent signals determines the DNA sequence of the template. The real-time sequencing capability of pyrosequencing technology enables rapid microbial identification in a single assay. In addition, the pyrosequencing instrument, can analyze the full genetic diversity of anti-microbial drug resistance, including typing of SNPs, point mutations, insertions, and deletions, as well as quantification of multiple gene copies that may occur in some anti-microbial resistance patterns.

Pyrosequencing is a versatile technique that facilitates microbial genome sequencing that can be used to identify bacterial species, discriminate bacterial strains, and detect genetic mutations that confer resistance to anti-microbial agents. In this video, the procedure for microbial amplicon generation, amplicon pyrosequencing, and DNA sequence analysis will be demonstrated.

Pyrosequencing is a versatile technique that facilitates microbial genome sequencing that can be used to identify bacterial species, discriminate ...

Biology

Fluorescence Based Primer Extension Technique to Determine Transcriptional Starting Points and Cleavage Sites of RNases In Vivo

Fluorescence based primer extension (FPE) is a molecular method to determine transcriptional starting points or processing sites of RNA molecules. This is achieved by reverse transcription of the RNA of interest using specific fluorescently labeled primers and subsequent analysis of the resulting cDNA fragments by denaturing polyacrylamide gel electrophoresis. Simultaneously, a traditional Sanger sequencing reaction is run on the gel to map the ends of the cDNA fragments to their exact corresponding bases. In contrast to 5&#39;-RACE (Rapid Amplification of cDNA Ends), where the product must be cloned and multiple candidates sequenced, the bulk of cDNA fragments generated by primer extension can be simultaneously detected in one gel run. In addition, the whole procedure (from reverse transcription to final analysis of the results) can be completed in one working day. By using fluorescently labeled primers, the use of hazardous radioactive isotope labeled reagents can be avoided and processing times are reduced as products can be detected during the electrophoresis procedure.
In the following protocol, we describe an in vivo fluorescent primer extension method to reliably and rapidly detect the 5&#39; ends of RNAs to deduce transcriptional starting points and RNA processing sites (e.g., by toxin-antitoxin system components) in S. aureus, E. coli and other bacteria.

Fluorescence Based Primer Extension Technique to Determine Transcriptional Starting Points and Cleavage Sites of RNases In Vivo

We here describe a fluorescence based primer extension method to determine transcriptional starting points from bacterial transcripts and RNA processing in vivo using an automated gel sequencer.

Fluorescence based primer extension (FPE) is a molecular method to determine transcriptional starting points or processing sites of RNA molecules. This is ...

DamID-seq: Genome-wide Mapping of Protein-DNA Interactions by High Throughput Sequencing of Adenine-methylated DNA Fragments

The DNA adenine methyltransferase identification (DamID) assay is a powerful method to detect protein-DNA interactions both locally and genome-wide. It is an alternative approach to chromatin immunoprecipitation (ChIP). An expressed fusion protein consisting of the protein of interest and the E. coli DNA adenine methyltransferase can methylate the adenine base in GATC motifs near the sites of protein-DNA interactions. Adenine-methylated DNA fragments can then be specifically amplified and detected. The original DamID assay detects the genomic locations of methylated DNA fragments by hybridization to DNA microarrays, which is limited by the availability of microarrays and the density of predetermined probes. In this paper, we report the detailed protocol of integrating high throughput DNA sequencing into DamID (DamID-seq). The large number of short reads generated from DamID-seq enables detecting and localizing protein-DNA interactions genome-wide with high precision and sensitivity. We have used the DamID-seq assay to study genome-nuclear lamina (NL) interactions in mammalian cells, and have noticed that DamID-seq provides a high resolution and a wide dynamic range in detecting genome-NL interactions. The DamID-seq approach enables probing NL associations within gene structures and allows comparing genome-NL interaction maps with other functional genomic data, such as ChIP-seq and RNA-seq.

We describe herein an assay by coupling DNA adenine methyltransferase identification (DamID) to high throughput sequencing (DamID-seq). This improved method provides a higher resolution and a wider dynamic range, and allows analyzing DamID-seq data in conjunction with other high throughput sequencing data such as ChIP-seq, RNA-seq, etc.

The DNA adenine methyltransferase identification (DamID) assay is a powerful method to detect protein-DNA interactions both locally and genome-wide. It is ...

Strand-Specific Analysis of Proteins at Replicating DNA Strands by Enrichment and Sequencing of Protein-Associated Nascent DNA Method

Genome duplication is orchestrated by replisome proteins, including helicases, which unwind double-stranded DNA into individual antiparallel single strands, each requiring distinct modes of replication: continuous (leading) and discontinuous (lagging). Understanding the interactions of chromatin-associated proteins with replicating DNA strands in vivo is crucial for elucidating the mechanisms of chromatin assembly and DNA repair coupled to DNA replication. This protocol presents the enrichment and sequencing of protein-associated nascent DNA (eSPAN) method, designed to quantify relative protein levels on nascent leading and lagging DNA strands at replication forks. The eSPAN procedure starts with chromatin immunoprecipitation (ChIP, in yeast) or cleavage under targets and tagmentation (CUT&amp;Tag; in mammalian cells) of a protein of interest, followed by enrichment of the protein-associated nascent DNA by bromodeoxyuridine (BrdU) immunoprecipitation. Strand-specific next-generation sequencing is applied to isolated ssDNA. This technique can be used to determine whether a protein is enriched at leading or lagging replication forks. The eSPAN provides genome-wide strand-preference of chromatin-associated proteins, including histones at replication forks.

Enrichment and sequencing of protein-associated nascent DNA (eSPAN) was developed to detect the relative abundance of a chromatin-associated protein on two replicating DNA strands, thereby revealing molecular insight into chromatin replication and its coupled processes. This protocol describes eSPAN procedures in yeast and mouse embryonic stem (ES) cells.

Genome duplication is orchestrated by replisome proteins, including helicases, which unwind double-stranded DNA into individual antiparallel single ...

16S rRNA Sequencing: A PCR-based Technique to Identify Bacterial Species

Source: Ewa Bukowska-Faniband1, Tilde Andersson1, Rolf Lood1 
1 Department of Clinical Sciences Lund, Division of Infection Medicine, Biomedical Center, Lund University, 221 00 Lund, Sweden
Planet Earth is a habitat for millions of bacterial species, each of which has specific characteristics. Identification of bacterial species is widely used in microbial ecology to determine biodiversity of environmental samples and medical microbiology to diagnose infected patients. Bacteria can be classified using conventional microbiology methods, such as microscopy, growth on specific media, biochemical and serological tests, and antibiotic sensitivity assays. In recent decades, molecular microbiology methods have revolutionized bacterial identification. A popular method is 16S ribosomal RNA (rRNA) gene sequencing. This method is not only faster and more accurate than conventional methods, but also allows identification of strains that are difficult to grow in laboratory conditions. Furthermore, differentiation of strains at the molecular level enables discrimination between phenotypically identical bacteria (1-4).
16S rRNA joins with a complex of 19 proteins to form a 30S subunit of the bacterial ribosome (5). It is encoded by the 16S rRNA gene, which is present and highly conserved in all bacteria due to its essential function in ribosome assembly; however, it also contains variable regions which may serve as fingerprints for particular species. These features have made the 16S rRNA gene an ideal genetic fragment to be used in identification, comparison, and phylogenetic classification of bacteria (6).
16S rRNA gene sequencing is based on the polymerase chain reaction (PCR) (7-8) followed by DNA sequencing (9). PCR is a molecular biology method used to amplify specific fragments of DNA through a series of cycles that include:
i) Denaturation of a double stranded DNA template 
ii) Annealing of primers (short oligonucleotides) that are complementary to the template 
iii) Extension of primers by the DNA polymerase enzyme, which synthesizes a new DNA strand
A schematic overview of the method is shown in Figure 1.
<img alt="Figure 1" class="xfigimg" src="/files/ftp_upload/10510/10510fig1.jpg" /> 
Figure 1: Schematic overview of the PCR reaction. <a href="https://www.jove.com/files/ftp_upload/10510/10510fig1large.jpg" target="_blank">Please click here to view a larger version of this figure.</a>
There are several factors that are important for a successful PCR reaction, one of which is quality of the DNA template. Isolation of chromosomal DNA from bacteria can be performed using standard protocols or commercial kits. Special care should be taken to obtain DNA that is free of contaminants that can inhibit the PCR reaction.
Conserved regions of the 16S rRNA gene permit the design of universal primer pairs (one forward and one reverse) that can bind to and amplify the target region in any bacterial species. The target region can vary in size. While some primer pairs can amplify most of the 16S rRNA gene, others amplify only parts of it. Examples of commonly used primers are shown in Table 1 and their binding sites are depicted in Figure 2.
<table border="1" fo:keep-together.within-page="1" fo:keep-with-next.within-page="always">
	<tbody>
		<tr>
			<td>Primer name</td>
			<td>Sequence (5&#39;&#8594;3&#39;)</td>
			<td>Forward/ reverse</td>
			<td>Reference</td>
		</tr>
		<tr>
			<td>8F b)</td>
			<td>AGAGTTTGATCCTGGCTCAG</td>
			<td>forward</td>
			<td>-1</td>
		</tr>
		<tr>
			<td>27F</td>
			<td>AGAGTTTGATCMTGGCTCAG</td>
			<td>forward</td>
			<td>-10</td>
		</tr>
		<tr>
			<td>515F</td>
			<td>GTGCCAGCMGCCGCGGTAA</td>
			<td>forward</td>
			<td>-11</td>
		</tr>
		<tr>
			<td>911R</td>
			<td>GCCCCCGTCAATTCMTTTGA</td>
			<td>reverse</td>
			<td>-12</td>
		</tr>
		<tr>
			<td>1391R</td>
			<td>GACGGGCGGTGTGTRCA</td>
			<td>reverse</td>
			<td>-11</td>
		</tr>
		<tr>
			<td>1492R</td>
			<td>GGTTACCTTGTTACGACTT</td>
			<td>reverse</td>
			<td>-11</td>
		</tr>
	</tbody>
</table>
Table 1: Examples of standard oligonucleotides used in amplification of 16S rRNA genes a). 
a) The expected lengths of the PCR product generated using the different primer combinations can be estimated by calculating the distance between the binding sites for the forward and the reverse primer (see Figure 2), e.g. the size of the PCR product using primer pair 8F-1492R is ~1500 bp, and for primer pair 27F-911R ~900 bp. 
b) also known as fD1
<img alt="Figure 2" class="xfigimg" src="/files/ftp_upload/10510/10510fig2.jpg" /> 
Figure 2: Representative figure of the 16S rRNA sequence and the primer-binding sites. Conserved regions are colored in grey and variable regions are filled with diagonal lines. To allow for the highest resolution, primer 8F and 1492R (name based on location on rRNA sequence) are used to amplify the whole sequence, allowing for the sequencing of several variable regions of the gene. <a href="https://www.jove.com/files/ftp_upload/10510/10510fig2large.jpg" target="_blank">Please click here to view a larger version of this figure.</a>
Cycling conditions for PCR (i.e. the temperature and time required for the DNA to be denatured, annealed with primers, and synthesized) are dependent on the type of polymerase that is used and the properties of the primers. It is recommended to follow the manufacturer&#39;s guidelines for a particular polymerase.
After the PCR program is completed, the products are analyzed by agarose gel electrophoresis. A successful PCR yields a single band of expected size. The product must be purified prior to sequencing to remove residual primers, deoxyribonucleotides, polymerase, and buffer which were present in the PCR reaction. The purified DNA fragments are usually sent for sequencing to commercial sequencing services; however, some institutions perform DNA sequencing at their own core facilities.
The DNA sequence is automatically generated from a DNA chromatogram by a computer and must be carefully checked for quality, as manual editing is sometimes needed. Following this step, the gene sequence is compared with sequences deposited in the 16S rRNA database. The regions of similarity are identified, and the most similar sequences are delivered.

16S rRNA Sequencing: Identifying Bacterial Species by PCR

Source: Ewa Bukowska-Faniband1, Tilde Andersson1, Rolf Lood1
1 Department of Clinical Sciences Lund, Division of Infection Medicine, Biomedical Center, ...

Education

JoVE Science Education

Advanced Biology

Microbiology

Gradient Polymerase Chain Reaction to Determine the Optimum Annealing Temperature

Source: Tsujimoto, H. et al., <a href="https://app.jove.com/v/63008">Indel Detection following CRISPR/Cas9 Mutagenesis using High-resolution Melt Analysis in the Mosquito Aedes aegypti.</a> J. Vis. Exp. (2021).
This video demonstrates the gradient polymerase chain reaction for optimization of the annealing temperature of primers, which sets gradient annealing temperature along wells. The effect of different annealing temperatures is determined by the yield of amplified products that helps to optimize the reaction condition.

Source: Tsujimoto, H. et al., Indel Detection following CRISPR/Cas9 Mutagenesis using High-resolution Melt Analysis in the Mosquito Aedes aegypti. J. Vis. ...

DNA Sequence Recognition by DNA Primase Using High-Throughput Primase Profiling

Summary

Explore More Videos

Rare Event Detection Using Error-corrected DNA and RNA Sequencing

Novel Sequence Discovery by Subtractive Genomics

Probing RNA Structure with Dimethyl Sulfate Mutational Profiling with Sequencing In Vitro and in Cells

DNAzyme 10-23 - Based Nanomachines for Nucleic Acid Recognition

Pyrosequencing for Microbial Identification and Characterization

Fluorescence Based Primer Extension Technique to Determine Transcriptional Starting Points and Cleavage Sites of RNases In Vivo

DamID-seq: Genome-wide Mapping of Protein-DNA Interactions by High Throughput Sequencing of Adenine-methylated DNA Fragments

Strand-Specific Analysis of Proteins at Replicating DNA Strands by Enrichment and Sequencing of Protein-Associated Nascent DNA Method

16S rRNA Sequencing: A PCR-based Technique to Identify Bacterial Species

Gradient Polymerase Chain Reaction to Determine the Optimum Annealing Temperature