The University of Utah
7 ARTICLES PUBLISHED IN JoVE
Engineering
Hydrogel Synthesis
Amber N. Barron 1, Ashlea Patterson 1, Taylor D. Sparks 1
1The University of Utah
Hydrogel Synthesis
Engineering
Differential Scanning Calorimetry
Danielle N. Beatty 1, Taylor D. Sparks 1
1The University of Utah
Differential Scanning Calorimetry
Engineering
Thermal Diffusivity and the Laser Flash Method
Elise S.D. Buki 1, Danielle N. Beatty 1, Taylor D. Sparks 1
1The University of Utah
Thermal Diffusivity and the Laser Flash Method
Engineering
Electroplating of Thin Films
Logan G. Kiefer 1, Andrew R. Falkowski 1, Taylor D. Sparks 1
1The University of Utah
Electroplating of Thin Films
Engineering
Analysis of Thermal Expansion via Dilatometry
J. Jacob Chavez 1, Ryan T. Davis 1, Taylor D. Sparks 1
1The University of Utah
Analysis of Thermal Expansion via Dilatometry
Engineering
Electrochemical Impedance Spectroscopy
Kara Ingraham 1, Jared McCutchen 1, Taylor D. Sparks 1
1The University of Utah
Electrochemical Impedance Spectroscopy
Engineering
Patterning via Optical Saturable Transitions - Fabrication and Characterization
Precious Cantu 1, Trisha L. Andrew 2, Rajesh Menon 1
1Department of Electrical and Computer Engineering, The University of Utah, 2Department of Chemistry, The University of Wisconsin-Madison
We report that the diffraction limit of conventional optical lithography can be overcome by exploiting the transitions of organic photochromic derivatives induced by their photoisomerization at low light intensities.1-3 This paper outlines our fabrication technique and two locking mechanisms, namely: dissolution of one photoisomer and electrochemical oxidation.
Copyright © 2024 MyJoVE Corporation. Alle Rechte vorbehalten