cooling stage final assembling

Construction et fonctionnement d’un étage de refroidissement pour immobiliser C. elegans en masse

High-resolution optical microscopy provides an indispensable tool for studying in vivo biological structures at the subcellular level. Many biological studies require submicron resolution imaging to resolve subtle anatomical details, including neuron morphology1,2, membrane structure3,4, and protein localization5,6. A high-resolution image requires an exposure time of several milliseconds to seconds, depending on the imaging modality and probe7,8. To achieve optimal results, it is essential to carefully plan and conduct microscopy-based experiments. Crucial to this effort is an efficient animal preparation method that facilitates high-resolution imaging.
The nematode C. elegans is a widely utilized model organism for studying many biological processes9. This small animal is typically cultivated on nematode growth medium (NGM) agar plates, and they reproduce rapidly by self-fertilization, making them well-suited for large-scale studies. Their transparency and a wide array of labeling techniques allow the straightforward visualization of their internal anatomy10,11. The fine structures in C. elegans are ideal for studying biological processes at the subcellular level, such as neuron regeneration12, neuron degeneration13, and cell division14. Such studies necessitate imaging at submicron resolution and animal immobilization strong enough to prevent image blur. Strong immobilization is especially crucial for techniques involving multiple images in space or time, such as 3D image stacks (i.e., z-stacks) and time-lapse imaging. Any animal movement between the exposures can obscure the result. For C. elegans, strong immobilization typically involves manual manipulation of individual animals and mounting them on slides with an anesthetic15,16. These time- and labor-intensive procedures make large-scale experiments very difficult. An immobilization strategy where animals are directly and reversibly immobilized on their original cultivation plates could enable high-throughput high-resolution imaging.
Cooling immobilization of C. elegans has been shown in a few studies but is not widely utilized. It is usually combined with a microfluidic device to further restrain animals17,18,19. However, microfluidic devices are complex, require significant operational training, and cannot be easily integrated with typical solid cultivation workflows of C. elegans experiments. Thus, microfluidics are not widely utilized for C. elegans immobilization. Presented here, in conjunction with the Chung Laboratory&#39;s recent publication20, is the introduction of a new cooling immobilization approach using a thermoelectric cooling stage (Figure 1) to address these shortcomings. With the cooling stage, a typical 60 mm polystyrene cultivation plate can be cooled down to any target temperature (Tset) between -8 &#176;C to room temperature. This cooling stage approach can readily and reversibly immobilize an entire animal population with minimal user effort, eliminating 98% of the animal processing time20.
Below, the procedures for building a cooling stage from scratch are described. Except for the machining of parts and 3D printing, the whole procedure is expected to take 4 h without the requirement of special tools or expertise. Then, three different cooling strategies with varying cooling rates and user efforts to immobilize C. elegans on a typical upright microscope are further described. The preferred strategy may depend on the user application. The protocols for those three cooling immobilization strategies are described in detail.

Pleins feux sur l’auteur : Assemblage et fonctionnement d’une étape de refroidissement pour immobiliser C. elegans sur leurs plaques de culture  

Assemblage et fonctionnement d’une platine de refroidissement pour immobiliser C. elegans sur leurs plaques de culture

Watch this Scientific Journal Video about Cooling Stage Final Assembling at JoVE.com

Cooling Stage Final Assembling  

Étape de refroidissement Assemblage final

Appliquez environ 0,4 gramme de pâte thermique sur la dépression carrée de la plaque de cuivre et sur la surface froide du peltier déjà fixé au bloc de refroidissement en cuivre. Connectez la surface froide plus pelière à la dépression de la plaque de cuivre avec une pression vers le bas. Nettoyez ensuite l’excès de pâte thermique.Montez le support imprimé en 3D sur le dessus du bloc de refroidissement en cuivre, puis utilisez une clé hexagonale pour serrer deux vis 832 de 0,5 pouce de long pour fixer le support à la plaque de cuivre. Placez la plaque de cuivre dans la base d’isolation imprimée en 3D pour une isolation thermique à partir de la base de paillasse ou de microscope pendant le fonctionnement. L’étage de refroidissement est assemblé et prêt à l’emploi.L’étage de refroidissement est conçu pour un étage de microscope vertical typique avec une insertion et un retrait faciles. Lorsque l’immobilisation du refroidissement est nécessaire pour l’imagerie ou le dépistage, l’étage de refroidissement est placé sur l’étage du microscope pour terminer l’installation, et vice versa. Un thermomètre à couple thermique utilisé pour suivre la température de surface de la plaque placée sur la platine de refroidissement a montré que l’étage refroidissait la plaque de 20 degrés à six degrés Celsius en six minutes à un degré Celsius en 10 minutes et se stabilisait finalement en dessous de moins sept degrés Celsius en environ 40 minutes.

Research

JoVE Journal

Biology

Cooling Stage Final Assembling

317 vues. Appliquez environ 0,4 gramme de pâte thermique sur la dépression carrée de la plaque de cuivre et sur la surface froide du peltier déjà fixé au bloc de refroidissement en cuivre. Connectez la surface froide plus pelière à la dépression de la plaque de cuivre avec une pression vers le bas. Nettoyez ensuite l’excès de pâte thermique.Montez le support imprimé en 3D sur le dessus du bloc de refroidissement en cuivre, puis utilisez une clé hexagonale pour serrer deux vis 832 ...

Vidéo: Cooling Stage Final Assembling  

Assembly and Operation of a Cooling Stage to Immobilize C. elegans on Their Culture Plates

High-resolution in vivo microscopy approaches can reveal subtle information and fine details inside the model animal Caenorhabditis elegans (C. elegans), but require strong animal immobilization to prevent motion blur in the images. Unfortunately, most current immobilization techniques require substantial manual effort, rendering high-resolution imaging low-throughput. Immobilization of C. elegans is greatly simplified by using a cooling approach that can easily immobilize entire populations directly on their cultivation plates. The cooling stage can establish and maintain a wide range of temperatures with a uniform distribution on the cultivation plate. In this article, the whole process of building the cooling stage is documented. The aim is that a typical researcher can build an operational cooling stage in their laboratory following this protocol without difficulty. Utilization of the cooling stage following three protocols is shown, and each protocol has advantages for different experiments. Also shown is an example cooling profile of the stage as it approaches its final temperature and some helpful tips in using cooling immobilization.

This paper describes protocols for constructing and operating a cooling stage to immobilize C. elegans on their original cultivation plates en masse.

High-resolution in vivo microscopy approaches can reveal subtle information and fine details inside the model animal Caenorhabditis elegans (C. elegans), ...

Recherche

Biologie

Preparation of Cooling Stage Component and Construction of Water-Cooling Assembly

Préparation du composant de l’étage de refroidissement et construction de l’ensemble de refroidissement par eau

Constructing the Assembly to Cool the Peltier Using Water-Cooling Assembly

Construction de l’ensemble pour refroidir le peltier à l’aide d’un ensemble de refroidissement par eau

Constructing Copper Plate and Sapphire Window Assembly

Construction d’une plaque de cuivre et d’un ensemble de fenêtres en saphir