Gli autori ringraziano Karen Hilburn per un eccellente supporto tecnico. Questo progetto è stato sostenuto dal National Research Initiative dello Stato USDA cooperativa ricerca, istruzione e servizi di estensione (Premio # 2004-35604-14327). Matias Pasquali è supportato da Branco Weiss Fellowship. Il grano statunitense e Scab Iniziativa L&#39;orzo è anche riconosciuto per il continuo sostegno della ricerca.

<ol><li> Agar carota (Klittich e Leslie, 1988) è stato preparato in piatti di diametro 9 cm di Petri. </li><li> Un cubo 2 mm di agar contenente micelio freschi coltivati ​​su agar patata destrosio è stato applicato al centro di ogni piatto di Petri. </li><li> Le culture sono state coltivate a 25 ° C e una 12-ore fotoperiodo di 96 ore. </li><li> Un ml di soluzione acquosa 2,5% Tween 60 è stata applicata sulla superficie della cultura (Trail e Common, 2000) e diffuse in tutta la cultura con una bacchetta di plastica, premendo delicatamente. </li><li> Riprese periteci ascospore sviluppato 7-10 giorni dopo questo trattamento di induzione, conservato in un ambiente alto tasso di umidità a 25 ° C con il fotoperiodo stesso. </li><li> Spore raccolta viene eseguita modificando il coperchio della piastra Petri, lasciando periteci di girare per un tempo limitato (per esempio 12 ore) al buio. </li><li> Acqua sterile è aggiunto il coperchio, sospendendo ascospore delicatamente movimento dell&#39;acqua in superficie. </li><li> Ascospore sono raccolti in provette sterili Falcon, lavati e utilizzati per ulteriori analisi. </li></ol>

<ol>
	<li>Beyer, M., Verreet, J. A., Francl, L., Shaner, G., Bergstrom, G., Gilbert, J., Pedersen, W., Dill-Macky, R., Sweets, L., Corwin, B., Jin, Y., Gallenberg, D., Wiersma, J., Goswami, R. S., Kistler, H. C., Klittich, C. J. R., Leslie, J. F., Trail, F., Common, R., Tschantz, A. T., Horst, R. L., Nelson, P. E., Tschanz, A. T., Horst, R. K., Nelson, P. E. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Germination+of+Gibberella+zeae+ascospores+as+affected+by+age+of+spores+after+discharge+and+environmental+factors.">Germination of Gibberella zeae ascospores as affected by age of spores after discharge and environmental factors.</a> Genetics. 118, 417-2013 (2005).</li></ol>

Il protocollo qui presentata si basa su precedenti procedure utilizzate per la produzione di perithecial per Fusarium spp. (Klittich e Leslie, 1988; Trail e Common, 2000). Standardizzazione della procedura con la quale sono state generate grandi quantità di ascospore (sufficiente per l&#39;analisi microarray) è stato essenziale per la riproducibilità dell&#39;esperimento. E &#39;stato riportato che le differenze i fattori ambientali, età e substrato può cambiare il carattere biologico delle ascospore (Beyer e Verreet, 2005). Pertanto l...

<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en" lang="en">	
		
		<div>
		<table border="1">
		<thead>
		<tr>
		<th>Material Name</th>
		<th>Type</th>
		<th>Company</th>
		<th>Catalogue Number</th>
		<th>Comment</th>
		</tr>
		</thead>
		<tbody>
		
<tr>
<td>Petri dish 9 cm Diameter</td>
<td>Tool</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<tr>
<td>Tween 60 (20%)</td>
<td>Reagent</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<tr>
<td>Carrot agar (20% w/v organic carrots and 1.5% w/v agar) </td>
<td>Reagent</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<td>&nbsp;</td>		</tbody>
		</table>
		</div>
			<div>
					</div>

gibberella zeae ascospore production and collection for microarray experiments.

Fusarium graminearum Schwabe (teleomorph Gibberella zeae) è un patogeno per le piante che causano la malattia crosta di grano e orzo, che riduce la qualità e la resa delle colture di grano. F. graminearum causa anche marcisce stelo e spiga di mais ed è un produttore di micotossine, quali i tricoteceni che contaminano cereali e sono nocivi per gli esseri umani e animali (Goswami e Kistler, 2004). Il fungo produce due tipi di spore. Ascospore, i propaguli che derivi dalla riproduzione sessuale, sono la principale fonte di infezione primaria. Queste spore sono forzatamente dimessi periteci maturi e disperse dal vento (Francl et al 1999). Infezioni secondarie sono principalmente causati da macroconidia che sono prodotte per mezzo asessuata sulla superficie della pianta. Per studiare i processi di sviluppo di ascospore in questo fungo, una procedura per la loro raccolta in grande quantità in condizioni di sterilità è stato richiesto. Il nostro protocollo è stato filmato in modo da generare il massimo livello di informazione per la comprensione e la riproducibilità; aspetti cruciali quando è piena genoma profili di espressione genica sono generati e interpretati. In particolare, la variabilità di germinazione ascospore e l&#39;attività biologica dipendono dalla prima manipolazione del materiale. L&#39;uso del video per documentare ogni fase di produzione ascospore viene proposto al fine di aumentare la standardizzazione, conformi ai requisiti sempre più stringenti per l&#39;analisi microarray. La procedura richiede solo equipaggiamento standard di laboratorio. Passaggi sono illustrati per impedire la contaminazione e tempo di sincronizzazione favore di ascospore.

Watch this Scientific Journal Video about Gibberella zeae Ascospore Production and Collection for Microarray Experiments. at JoVE.com

Gibberella zeae Ascospore Production and Collection for Microarray Experiments.

Per studiare i processi di sviluppo delle ascospore in Gibberella zeae, una procedura per la raccolta in condizioni di sterilità è girato in modo da generare il massimo livello di informazioni per la descrizione del protocollo. Ciò dovrebbe facilitare la riproducibilità dell&#39;esperimento, un aspetto cruciale quando è piena genoma test profilo di espressione attuazione.

Gibberella zeae ascospore di produzione e di raccolta di esperimenti di microarray.

Fusarium graminearum Schwabe (teleomorph Gibberella zeae) is a plant pathogen causing scab disease on wheat and barley that reduces crop yield and grain ...

gibberella-zeae-ascospore-production-collection-for-microarray

Research

JoVE Journal

Biology

14.1K Views.  USDA. Per studiare i processi di sviluppo delle ascospore in Gibberella zeae, una procedura per la raccolta in condizioni di sterilità è girato in modo da generare il massimo livello di informazioni per la descrizione del protocollo. Ciò dovrebbe facilitare la riproducibilità dell'esperimento, un aspetto cruciale quando è piena genoma test profilo di espressione attuazione.

Video: Gibberella zeae Ascospore Production and Collection for Microarray Experiments.

Application of Light-cured Dental Adhesive Resin for Mounting Electrodes or Microdialysis Probes in Chronic Experiments

In chronic recording experiments, self-curing dental acrylic resins have been used as a mounting base of electrodes or microdialysis-probes. Since these acrylics do not bond to the bone, screws have been used as anchors. However, in small experimental animals like finches or mouse, their craniums are very fragile and can not successfully hold the anchors. In this report, we propose a new application of light-curing dental resins for mounting base of electrodes or microdialysis probes in chronic experiments. This material allows direct bonding to the cranium. Therefore, anchor screws are not required and surgical field can be reduced considerably. Past experiences show that the bonding effect maintains more than 2 months. Conventional resin's window of time when the materials are pliable and workable is a few minutes. However, the window of working time for these dental adhesives is significantly wider and adjustable.

In this report, we propose a new application of light-curing dental resins for mounting base of electrodes or microdialysis probes in chronic experiments. This material allows direct bonding to the cranium.

Applicazione della Luce cured resina adesiva dentale per montaggio elettrodi o sonde Microdialisi negli esperimenti cronica

In chronic recording experiments, self-curing dental acrylic resins have been used as a mounting base of electrodes or microdialysis-probes. Since these ...

Ricerca

Biologia

Preparation of Artificial Bilayers for Electrophysiology Experiments

Planar lipid bilayers, also called artificial lipid bilayers, allow you to study ion-conducting channels in a well-defined environment. These bilayers can be used for many different studies, such as the characterization of membrane-active peptides, the reconstitution of ion channels or investigations on how changes in lipid bilayer properties alter the function of bilayer-spanning channels.  Here, we show how to form a planar bilayer and how to isolate small patches from the bilayer, and in a second video  will also demonstrate a procedure for using gramicidin channels to determine changes in lipid bilayer elastic properties.   We also demonstrate the individual steps needed to prepare the bilayer chamber, the electrodes and how to test that the bilayer is suitable for single-channel measurements.

Planar lipid bilayers, also called artificial lipid bilayers, allow you to study ion-conducting channels in a well-defined environment. Here, we demonstrate the individual steps needed to prepare the bilayer chamber, the electrodes and how to test that the bilayer is suitable for single-channel measurements.

Preparazione di doppi strati artificiali per esperimenti Elettrofisiologia

Planar lipid bilayers, also called artificial lipid bilayers, allow you to study ion-conducting channels in a well-defined environment. These bilayers can ...

Processing the Loblolly Pine PtGen2 cDNA Microarray

PtGen2 is a 26,496 feature cDNA microarray containing amplified loblolly pine ESTs. The array is produced in our laboratory for use by researchers studying gene expression in pine and other conifer species. PtGen2 was developed as a result of our gene discovery efforts in loblolly pine, and is comprised of sequences identified primarily from root tissues, but also from needle and stem.1,2 PtGen2 has been tested by hybridizing different Cy-dye labeled conifer target cDNAs, using both amplified and non-amplified indirect labeling methods, and also tested with a number of hybridization and washing conditions. This video focuses on the handling and processing of slides before and after pre-hybridization, as well as after hybridization, using some modifications to procedures developed previously.3,4 Also included, in text form only, are the protocols used for the generation, labeling and clean up of target cDNA s, as well as information on software used for downstream data processing. 
PtGen2 is printed with a proprietary print buffer that contains high concentrations of salt that can be difficult to remove completely. The slides are washed first in a warm SDS solution prior to pre-hybridization. After pre-hybridization, the slides are washed vigorously in several changes of water to complete removal of remaining salts. LifterSlips&trade; are then cleaned and positioned on the slides and labeled cDNA is carefully loaded onto the microarray by way of capillary action which provides for even distribution of the sample across the slide, and reduces the chance of bubble incorporation. Hybridization of targets to the array is done at 48&deg;C in high humidity conditions. After hybridization, a series of standard washes are done at 53&deg;C and room temperature for extended times. Processing PtGen2 slides using this technique reduces salt and SDS-derived artifacts often seen when the array is processed less rigorously. Hybridizing targets derived from several different conifer RNA sources, this processing protocol yielded fewer artifacts, reduced background, and provided better consistency among different experimental groups of arrays.

The cDNA microarray PtGen2 was developed for gene expression studies in loblolly pine, P. taeda, and other conifer species. Here, we show pre- and post-hybridization handling and washing techniques that can be used with this array to yield better consistency, reduced artifacts, and lower backgrounds.

L&#39;elaborazione del Pino Loblolly PtGen2 cDNA Microarray

PtGen2 is a 26,496 feature cDNA microarray containing amplified loblolly pine ESTs.  The array is produced in our laboratory for use by researchers ...

Microarray Analysis for Saccharomyces cerevisiae

In this protocol, gene expression in yeast (Saccharomyces cerevisiae) is changed after exposure to oxidative stress induced by the addition of hydrogen peroxide (H2O2), an oxidizing agent. In the experiment, yeast is grown for 48 hours in 1/2X YPD broth containing 3X glucose. The culture is split into a control and treated group. The experiment culture is treated with 0.5 mM H2O2 in Hanks Buffered Saline (HBSS) for 1 hour. The control culture is treated with HBSS only. Total RNA is extracted from both cultures and is converted to a biotin-labeled cRNA product through a multistep process. The final synthesis product is taken back to the UVM Microarray Core Facility and hybridized to the Affymetrix yeast GeneChips. The resulting gene expression data are uploaded into bioinformatics data analysis software.

Microarray Analysis for Saccharomyces cerevisiae

In this protocol, gene expression in yeast (Saccharomyces cerevisiae) is changed after exposure to oxidative stress induced by the addition of hydrogen peroxide (H2O2), an oxidizing agent.

Microarray analisi per Saccharomyces cerevisiae</em

In this protocol, gene expression in yeast (Saccharomyces cerevisiae) is changed after exposure to oxidative stress induced by the addition of hydrogen ...

DNA Extraction from Paraffin Embedded Material for Genetic and Epigenetic Analyses

Disease development and progression are characterized by frequent genetic and epigenetic aberrations including chromosomal rearrangements, copy number gains and losses and DNA methylation. Advances in high-throughput, genome-wide profiling technologies, such as microarrays, have significantly improved our ability to identify and detect these specific alterations. However as technology continues to improve, a limiting factor remains sample quality and availability. Furthermore, follow-up clinical information and disease outcome are often collected years after the initial specimen collection. Specimens, typically formalin-fixed and paraffin embedded (FFPE), are stored in hospital archives for years to decades. DNA can be efficiently and effectively recovered from paraffin-embedded specimens if the appropriate method of extraction is applied. High quality DNA extracted from properly preserved and stored specimens can support quantitative assays for comparisons of normal and diseased tissues and generation of genetic and epigenetic signatures 1. To extract DNA from paraffin-embedded samples, tissue cores or microdissected tissue are subjected to xylene treatment, which dissolves the paraffin from the tissue, and then rehydrated using a series of ethanol washes. Proteins and harmful enzymes such as nucleases are subsequently digested by proteinase K. The addition of lysis buffer, which contains denaturing agents such as sodium dodecyl sulfate (SDS), facilitates digestion 2. Nucleic acids are purified from the tissue lysate using buffer-saturated phenol and high speed centrifugation which generates a biphasic solution. DNA and RNA remain in the upper aqueous phase, while proteins, lipids and polysaccharides are sequestered in the inter- and organic-phases respectively. Retention of the aqueous phase and repeated phenol extractions generates a clean sample. Following phenol extractions, RNase A is added to eliminate contaminating RNA. Additional phenol extractions following incubation with RNase A are used to remove any remaining enzyme. The addition of sodium acetate and isopropanol precipitates DNA, and high speed centrifugation is used to pellet the DNA and facilitate isopropanol removal. Excess salts carried over from precipitation can interfere with subsequent enzymatic assays, but can be removed from the DNA by washing with 70% ethanol, followed by centrifugation to re-pellet the DNA 3. DNA is re-suspended in distilled water or the buffer of choice, quantified and stored at -20&deg;C. Purified DNA can subsequently be used in downstream applications which include, but are not limited to, PCR, array comparative genomic hybridization 4 (array CGH), methylated DNA Immunoprecipitation (MeDIP) and sequencing, allowing for an integrative analysis of tissue/tumor samples.

This video demonstrates the protocol for DNA extraction from formalin-fixed paraffin-embedded material. This is a multi-day procedure in which tissue sections are deparaffinized with xylene, rehydrated with ethanol and treated with proteinase K to purify and isolate DNA for subsequent gene-specific or genome-wide analysis.

Estrazione DNA da materiale in paraffina per le analisi genetiche ed epigenetiche

Disease development and progression are characterized by frequent genetic and epigenetic aberrations including chromosomal rearrangements, copy number ...

Performing Custom MicroRNA Microarray Experiments

microRNAs (miRNAs) are a large family of &tilde; 22 nucleotides (nt) long RNA molecules that are widely expressed in eukaryotes 1. Complex genomes encode at least hundreds of miRNAs, which primarily inhibit the expression of a vast number of target genes post-transcriptionally 2, 3. miRNAs control a broad range of biological processes 1. In addition, altered miRNA expression has been associated with human diseases such as cancers, and miRNAs may serve as biomarkers for diseases and prognosis 4, 5. It is important, therefore, to understand the expression and functions of miRNAs under many different conditions.
Three major approaches have been employed to profile miRNA expression: real-time PCR, microarray, and deep sequencing. The technique of miRNA microarray has the advantage of being high-throughput, generally less expensive, and most of the experimental and analysis steps can be carried out in a molecular biology laboratory at most universities, medical schools and associated hospitals. Here, we describe a method for performing custom miRNA microarray experiments. A miRNA probe set will be printed on glass slides to produce miRNA microarrays. RNA is isolated using a method or reagent that preserves small RNA species, and then labeled with a fluorescence dye. As a control, reference DNA oligonucleotides corresponding to a subset of miRNAs are also labeled with a different fluorescence dye. The reference DNA will serve to demonstrate the quality of the slide and hybridization and will also be used for data normalization. The RNA and DNA are mixed and hybridized to a microarray slide containing probes for most of the miRNAs in the database. After washing, the slide is scanned to obtain images, and intensities of the individual spots quantified. These raw signals will be further processed and analyzed as the expression data of the corresponding miRNAs. Microarray slides can be stripped and regenerated to reduce the cost of microarrays and to enhance the consistency of microarray experiments. The same principles and procedures are applicable to other types of custom microarray experiments.

A simple procedure of performing custom microRNA microarray experiments is described. The steps include isolating RNA, labeling RNA and reference DNA, hybridizing the samples to microarrays, scanning the microarrays, quantifying and analyzing hybridization signals.

Esecuzione personalizzati Esperimenti di Microarray MicroRNA

microRNAs (miRNAs) are a large family of &tilde; 22 nucleotides (nt) long RNA molecules that are widely expressed in eukaryotes 1.  Complex genomes encode ...

Sexual Development and Ascospore Discharge in Fusarium graminearum

Fusarium graminearum has become a model system for studies in development and pathogenicity of filamentous fungi. F. graminearum most easily produces fruiting bodies, called perithecia, on carrot agar. Perithecia contain numerous tissue types, produced at specific stages of perithecium development. These include (in order of appearance) formation of the perithecium initials (which give rise to the ascogenous hyphae), the outer wall, paraphyses (sterile mycelia which occupy the center of the perithecium until the asci develop), the asci, and the ascospores within the asci14. The development of each of these tissues is separated by approximately 24 hours and has been the basis of transcriptomic studies during sexual development12,8. Refer to Hallen et al. (2007) for a more thorough description of development, including photographs of each stage. Here, we present the methods for generating and harvesting synchronously developing lawns of perithecia for temporal studies of gene regulation, development, and physiological processes. Although these methods are written specifically to be used with F. graminearum, the techniques can be used for a variety of other fungi, provided that fruiting can be induced in culture and there is some synchrony to development. We have recently adapted this protocol to study the sexual development of F. verticillioides. Although individual perithecia must be hand picked in this species, because a lawn of developing perithecia could not be induced, the process worked well for studying development (Sikhakolli and Trail, unpublished).
The most important function of fungal fruiting bodies is the dispersal of spores. In many of the species of Ascomycota (ascus producing fungi), spores are shot from the ascus, due to the generation of turgor pressure within the ascus, driving ejection of spores (and epiplasmic fluid) through the pore in the ascus tip2,7. Our studies of forcible ascospore discharge have resulted in development of a "spore discharge assay", which we use to screen for mutations in the process. Here we present the details of this assay.
F. graminearum is homothallic, and thus can form fruiting bodies in the absence of a compatible partner. The advantage of homothallism is that crossing is not necessary to generate offspring homozygous for a particular trait, a facet that has facilitated the study of sexual development in this species14,7. However, heterothallic strains have been generated that can be used for crossing5,9. It is also possible to cross homothallic strains to obtain mutants for several genes in one strain1. This is done by coinoculating one Petri dish with 2 strains. Along the meeting point, the majority of perithecia will be recombinant (provided a mutation in one of the parent strains does not inhibit outcrossing). As perithecia age, they exude ascospores en masse instead of forcibly discharging them. The resulting spore exudate (called a cirrhus) sits at the tip of the perithecium and can easily be removed for recovery of individual spores. Here we present a protocol to facilitate the identification of recombinant perithecia and the recovery of recombinant progeny.

Sexual Development and Ascospore Discharge in Fusarium graminearum

Sexual crosses and isolation of recombinant progeny are important research tools for the filamentous fungus, Fusarium graminearum, The techniques necessary successfully carry out these processes are presented.

Sviluppo sessuale e scarico in ascospore Fusarium graminearum</em

Fusarium graminearum has become a model system for studies in development and pathogenicity of filamentous fungi. F. graminearum most easily produces ...

Milk Collection Methods for Mice and Reeves' Muntjac Deer

Animal models are commonly used throughout research laboratories to accomplish what would normally be considered impractical in a pathogen&#8217;s native host. Milk collection from animals allows scientists the opportunity to study many aspects of reproduction including vertical transmission, passive immunity, mammary gland biology, and lactation. Obtaining adequate volumes of milk for these studies is a challenging task, especially from small animal models. Here we illustrate an inexpensive and facile method for milk collection in mice and Reeves&#8217; muntjac deer that does not require specialized equipment or extensive training. This particular method requires two researchers: one to express the milk and to stabilize the animal, and one to collect the milk in an appropriate container from either a Muntjac or mouse model. The mouse model also requires the use of a P-200 pipetman and corresponding pipette tips. While this method is low cost and relatively easy to perform, researchers should be advised that anesthetizing the animal is required for optimal milk collection.

Milk Collection Methods for Mice and Reeves&#039; Muntjac Deer

Milk collection from animal models facilitates various research avenues: understanding passive immunity, identifying pathogens responsible for vertical transmission and, through the use of transgenic mice, even commercial production of proteins found in human breast milk. Here we illustrate a simple method for milk collection in mice and Reeves&#8217; muntjac deer.

Metodi Latte di raccolta per topi e Reeves &#39;Muntjac

Animal models are commonly used throughout research laboratories to accomplish what would normally be considered impractical in a pathogen&#8217;s native ...

A Multi-hole Cryovial Eliminates Freezing Artifacts when Muscle Tissues are Directly Immersed in Liquid Nitrogen

Studies on skeletal muscle physiology face the technical challenge of appropriately processing the specimens to obtain sections with clearly visible cytoplasmic compartments. Another hurdle is the tight apposition of myofibers to the surrounding tissues. Because the process of tissue fixation and paraffin embedding leads to the shrinkage of muscle fibers, freezing is an optimal means of hardening muscle tissue for sectioning. However, a commonly encountered issue, the formation of ice crystals, occurs during the preparation of frozen sections because of the high water content of muscle. The protocol presented here first describes a simple and efficient method for properly freezing muscle tissues by immersing them in liquid nitrogen. The problem with using liquid nitrogen alone is that it causes the formation of a nitrogen gas barrier next to the tissue, which acts as an insulator and inhibits the cooling of the tissues. To avoid this "vapor blanket" effect, a new cryovial was designed to increase the speed of liquid flow around the tissue surface. This was achieved by punching a total of 14 inlet holes in the wall of the vial. According to bubble dynamics, a higher rate of liquid flow results in smaller bubbles and fewer chances to form a gas barrier. When liquid nitrogen flows into the cryovial through the inlet holes, the flow velocity around the tissue is fast enough to eliminate the gas barrier. Compared to the method of freezing muscle tissues using pre-chilled isopentane, this protocol is simpler and more efficient and can be used to freeze muscle in a throughput manner. Furthermore, this method is optimal for institutions that do not have access to isopentane, which is extremely flammable at room temperature.

This protocol describes a procedure to freeze muscle tissues by plunging them directly into liquid nitrogen. This protocol also highlights a new cryovial that can avoid the &#34;blanket effect&#34; of nitrogen gas when liquid nitrogen contacts the tissue surface of a specimen.

Una multi-foro esageratamente Elimina gelati Imperfezioni muscoli sono direttamente immerso in azoto liquido

Studies on skeletal muscle physiology face the technical challenge of appropriately processing the specimens to obtain sections with clearly visible ...

Sperm Collection and Computer-Assisted Sperm Analysis in the Teleost Model Japanese Medaka (Oryzias latipes)

Japanese medaka (Oryzias latipes) is a teleost fish and&#160;an emerging vertebrate model for ecotoxicology, developmental, genetics, and physiology research. Medaka is also used extensively to investigate vertebrate reproduction, which is an essential biological function as it allows a species to perpetuate. Sperm quality is an important indicator of male fertility and, thus, reproduction success. Techniques for extracting sperm and sperm analysis are well documented for many species, including teleost fish. Collecting sperm is relatively simple in larger fish but can be more complicated in small model fish as they produce less sperm and are more delicate. This article, therefore, describes two methods of sperm collection in the small model fish, Japanese medaka: testes dissection and abdominal massage. This paper demonstrates that both approaches are feasible for medaka and shows that abdominal massage can be performed a repeated number of times as the fish quickly recover from the procedure. This article also describes a protocol for computer-assisted sperm analysis in medaka to objectively assess several important indicators of medaka sperm quality (motility, progressivity, duration of motility, relative concentration). These procedures, specified for this useful small teleost model, will greatly enhance understanding of the environmental, physiological, and genetic factors influencing fertility in vertebrate males.

Sperm Collection and Computer-Assisted Sperm Analysis in the Teleost Model Japanese Medaka Oryzias latipes

This article describes two quick and efficient methods for collecting sperm from the small model fish medaka (Oryzias latipes), as well as a protocol for reliably assessing sperm quality using computer-assisted sperm analysis (CASA).

Raccolta spermatica e analisi dello sperma assistita da computer nel modello Teleoste Medaka giapponese (Oryzias latipes)

Japanese medaka (Oryzias latipes) is a teleost fish and&#160;an emerging vertebrate model for ecotoxicology, developmental, genetics, and physiology ...