Finanziamento parziale per questo lavoro è stato fornito da NSF-CARRIERA 0744556 (Rao) e una borsa di studio attraverso il VCU-HHMI Scienze dell&#39;educazione e della Research Program (Pascual).

Parte 1: Sospensione colorazione immunocitochimica <ol><li> Le cellule sono raccolte in una sospensione di cellule singole. </li><li> Le cellule sono poi trasferiti in 1,5-microcentrifuga da 2 ml tubi e centrifugati a 200g per 4 minuti. </li><li> Le cellule sono lavate aspirando fuori surnatante, risospesi in 1 ml di PBS - (senza Mg 2 + e Ca 2 +) e poi centrifugati nuovamente a 200g per 4 minuti. Questo dovrebbe essere fatto due volte. </li><li> Dopo il lavaggio, le cellule vengono poi fissati dalla ri-sospensione in 1 ml di paraformaldeide 4% (PFA) a temperatura ambiente per 10 minuti. </li><li> Le cellule sono lavate di nuovo per due volte con 1 ml di PBS -. </li><li> Dopo il lavaggio, le cellule blocco per ri-sospensione in 1 ml di soluzione di blocco (6% serum/94% PBS -). Incubare questi a temperatura ambiente per 45 minuti. </li><li> Dopo, centrifugare le provette a 200 g per 4 minuti e aspirare fuori Solution Block. Risospendere le cellule in 1 ml della soluzione di anticorpo primario (fatta con la soluzione al blocco di diluizione consigliato). Le celle possono essere incubate a temperatura ambiente per 1 ora o a 4 ° C per una notte prima di procedere alla fase successiva. </li><li> Le cellule vengono poi lavate due volte con 1 ml di soluzione di blocco. </li><li> Dopo, risospendere le cellule in 1 ml di soluzione di anticorpo secondario (fatta con la soluzione al blocco di diluizione consigliato) e incubare a temperatura ambiente per 1 ora. </li><li> Dopo 1 ora, le cellule devono poi essere lavate di nuovo due volte con 1 ml di soluzione di blocco. </li><li> Dopo il lavaggio con la soluzione di blocco, lavare le cellule di nuovo con 1 ml di PBS -. </li><li> Dopo i lavaggi vari, risospendere le cellule in 1 ml di DAPI nucleare macchia (1:10.000 diluizione del DAPI in PBS -) e incubare a temperatura ambiente per 5 minuti. </li><li> Dopo 5 minuti, centrifugare le provette a 200 g per 4 minuti. Aspirare la soluzione nucleare DAPI macchia e risospendere le cellule in 1 ml di PBS -. </li></ol> Incorporazione di hPSCs nelle diapositive generate attraverso apparato cytospin: parte 2 <ol><li> Slitte di plastica vengono preparati facendo la quantità desiderata di fori con un trapano a colonna. Il diametro deve essere al massimo 1 millimetro più grande del diametro massimo della punta micropipetta (s) da utilizzare. </li><li> Carta da filtro viene tagliata ai parametri del vetrino di plastica con le forbici. </li><li> I fori vengono poi realizzati in carta da filtro. La dimensione del foro (s) deve essere abbastanza grande che la punta micropipetta (s) si adatta snuggly attraverso di essa. </li><li> Dopo, una delle diapositive plastica preparato è posizionato sulla parte superiore e una lastra di vetro in posto al fondo della carta filtro taglia (Figura 1). Gli strati sono fissati con nastro adesivo. </li><li> Un massimo di 100μL (a seconda della densità monostrato desiderato) di sospensione cellulare macchiato da parte 1 viene posto nella parte superiore della punta micropipetta (s). </li><li> Se necessario, l&#39;apparato con una soluzione di cella può essere pesato e un contro-bilanciamento di peso simile creato. </li><li> L&#39;apparato cytospin e contro-equilibrio può vengono quindi inseriti in una centrifuga desktop e centrifugato a 200g per 4 minuti. </li><li> Dopo la centrifugazione, l&#39;apparato cytospin viene accuratamente smontata in un modo che doesnt rimuovere le cellule dal vetrino. </li><li> Se necessario, l&#39;eccesso di PBS circostanti - dalla parte di vetro in aspirato fuori. </li><li> Le celle possono poi essere visualizzati con un microscopio a fluorescenza per verificare se il monostrato cellulare desiderato è stato raggiunto. </li></ol> Parte 3: scivoli di montaggio <ol><li> Una goccia del supporto di montaggio desiderata viene inserito direttamente nel centro di ogni area contenente le cellule. </li><li> Dopo, una scivolata coperchio è abbassato delicatamente sul diapositive cercando di evitare bolle d&#39;aria, se possibile. </li><li> Eccesso di mezzi di montaggio viene quindi rimosso da diapositive. </li><li> Dopo, i lati del coprioggetto sono sigillati con smalto. </li><li> Le slide possono essere conservati in un deposito scuro finché i risultati sono stati osservati e documentati. </li></ol>

<ol>
	<li>Rao, R. R., Johnson, A. V., Stice, S. L. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Cell+surface+markers+in+human+embryonic+stem+cells.">Cell surface markers in human embryonic stem cells.</a> Methods in Mol. Bio. - Stem Cell Assays. 407, 51-61 (2007).</li><li>Sisino, G., Bellavia, D., Corallo, M., Geraci, F., Barbieri, R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+homemade+cytospin+apparatus.">A homemade cytospin apparatus.</a> Anal. Biochem. 359, 283-284 (2006).</li></ol>

Nessun conflitto di interessi dichiarati.

Ai fini del nostro laboratorio, un piatto di 35 mm di colture di cellule staminali coltivate su fibroblasti embrionali del mouse (MEF) è assegnato per la procedura di colorazione immunocitochimica per l&#39;utilizzo con l&#39;apparecchio cytospin. Le cellule sono poi raccolti tramite enzimatica passaging, eliminando quanto più dello strato MEF possibile, in una cella singola sospensione. Se è più efficace isolamento delle cellule staminali dallo strato MEF si desidera, le colonie possono essere raccolte manualmente ...

<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en" lang="en">	
		
		<div>
		<table border="1">
		<thead>
		<tr>
		<th>Material Name</th>
		<th>Type</th>
		<th>Company</th>
		<th>Catalogue Number</th>
		<th>Comment</th>
		</tr>
		</thead>
		<tbody>
		
<tr>
<td>Lab Tek Permanox Chamber Slide</td>
<td>&nbsp;</td>
<td>Thermo Fisher Scientific</td>
<td>117437</td>
<td>Material for re-used plastic slides</td>
</tr>
<tr>
<td>Superfrost/Plus Microscope Slides Precleaned</td>
<td>&nbsp;</td>
<td>Fisher Scientific</td>
<td>12-550-15</td>
<td>&nbsp;</td>
<tr>
<td>0.1-10&mu;L Filter Tips</td>
<td>&nbsp;</td>
<td>USA Scientific</td>
<td>1121-3810</td>
<td>&nbsp;</td>
<tr>
<td>Microscope Cover Glass</td>
<td>&nbsp;</td>
<td>Fisher Scientific</td>
<td>120542-B</td>
<td>&nbsp;</td>
<tr>
<td>Cytoseal 280</td>
<td>&nbsp;</td>
<td>Richard-Allan Scientific</td>
<td>8311-4</td>
<td>Mounting Medium</td>
</tr>
<tr>
<td>DPBS</td>
<td>&nbsp;</td>
<td>Gibco</td>
<td>14190</td>
<td>&nbsp;</td>
<tr>
<td>Normal Goat Serum</td>
<td>&nbsp;</td>
<td>Invitrogen</td>
<td>10000C</td>
<td>&nbsp;</td>
<tr>
<td>Mouse Anti-SSEA-4 Monoclonal Antibody</td>
<td>&nbsp;</td>
<td>Millipore/Chemicon</td>
<td>MAB4304</td>
<td>Primary Antibody for SSEA-4 staining</td>
</tr>
<tr>
<td>Rat Anti-SSEA-3 Monoclonal Antibody</td>
<td>&nbsp;</td>
<td>Millipore/Chemicon</td>
<td>MAB4303</td>
<td>Primary Antibody for SSEA-3 staining</td>
</tr>
<tr>
<td>Alexa Fluor 488 Goat Anti-Mouse IgG</td>
<td>&nbsp;</td>
<td>Invitrogen/ Molecular Probes</td>
<td>A11029</td>
<td>Secondary Antibody for SSEA-4 staining</td>
</tr>
<tr>
<td>Alexa Fluor 488 Labeled Goat Anti-Rat IgG </td>
<td>&nbsp;</td>
<td>Invitrogen/ Molecular Probes</td>
<td>A11006</td>
<td>Secondary Antibody for SSEA-3 staining</td>
</tr>
<tr>
<td>DAPI, Dihydrochloride</td>
<td>&nbsp;</td>
<td>CalBioChem</td>
<td>268298</td>
<td>&nbsp;</td>		</tbody>
		</table>
		</div>

immunocytochemical analysis of human pluripotent stem cells using a self-made cytospin apparatus

Cellule staminali pluripotenti (hPSCs) che includono cellule staminali embrionali umane (hESC) e umani cellule staminali pluripotenti indotte (hiPSCs) sono fonti di cellule eccitante a causa della loro illimitata capacità di auto-rinnovamento e il loro potenziale di differenziarsi in tipi cellulari diversi. Lo stato pluripotente di hPSCs è tipicamente valutata mediante tecniche come qPCR, immunocitochimica, e da altri<em&gt; In vitro</em&gt; E<em&gt; In vivo</em&gt; Strategie di differenziazione in tipi di cellule diverse. Tra questi, tecniche immunocitochimiche sono state sviluppate per la caratterizzazione di routine dello stato indifferenziato di hPSCs sulla base di analisi di biomarcatori candidato intracellulare e superficie cellulare. Dato il fatto che hPSCs crescere come colonie, i problemi sorgono nel quantificare l&#39;espressione di questi marcatori a livello cellulare individuali su base di routine. Analisi di citometria a flusso servire per risolvere questo problema, ma richiedono numero di cellule e l&#39;utilizzo di reagenti che non sono normalmente favorevole per la valutazione di routine di controllo di qualità di colture hPSC. Così, lo sviluppo di mezzi pratici e riproducibile di creare campioni di cellule monostrato con integrità preservata per la valutazione marcatore ha molti vantaggi nel campo della ricerca sulle cellule staminali. Questo benefici notevolmente l&#39;analisi immunocitochimica perché le cellule individuali dal monostrato può essere facilmente osservato e quantificato per l&#39;espressione di marcatori specifici. Verso questo obiettivo, un self-made cytospin apparato è stato costruito e ottimizzato per l&#39;utilizzo con colorazione immunocitochimica. Due marcatori di superficie cellulare (SSEA3/SSEA4) espressione sono stati analizzati in una linea di cellule staminali variante BG01 ai fini di questo protocollo.

Watch this Scientific Journal Video about Immunocytochemical Analysis of Human Pluripotent Stem Cells using a Self-Made Cytospin Apparatus at JoVE.com

Immunocytochemical Analysis of Human Pluripotent Stem Cells using a Self-Made Cytospin Apparatus

Sospensione colorazione immunocitochimica di cellule staminali umane pluripotenti (hPSCs) per la superficie cellulare marcatori (SSEA-3/SSEA-4) è stato raggiunto sulla base di utilizzo di un self-made apparato cytospin per creare un monostrato di cellule per l&#39;osservazione e la quantificazione.

Analisi immunocitochimica di cellule staminali umane pluripotenti usando un Self-Made Apparato Cytospin

Human pluripotent stem cells (hPSCs) that include human embryonic stem cells (hESCs) and human induced pluripotent stem cells (hiPSCs) are exciting cell ...

immunocytochemical-analysis-human-pluripotent-stem-cells-using-self

Research

JoVE Journal

Biology

14.2K Views.  Virginia Commonwealth University. Sospensione colorazione immunocitochimica di cellule staminali umane pluripotenti (hPSCs) per la superficie cellulare marcatori (SSEA-3/SSEA-4) è stato raggiunto sulla base di utilizzo di un self-made apparato cytospin per creare un monostrato di cellule per l'osservazione e la quantificazione.

Video: Immunocytochemical Analysis of Human Pluripotent Stem Cells using a Self-Made Cytospin Apparatus

Analysis of Pluripotent Stem Cells by using Cryosections of Embryoid Bodies

Embryonic stem (ES) cells are pluripotent cells derived from the inner cell mass of blastocyst-stage early mammalian embryos 1. A crucial stage in the differentiation of ES cells is the formation of embryoid bodies (EBs) aggregates 2, 3. EB formation is based on spontaneous aggregation when ES cells are cultured in non adherent plates. Three-dimensional EB recapitulates many aspects of early mammalian embryogenesis and differentiate into the three germ layers: ectoderm, mesoderm and endoderm 4.
Immunofluorescence and in situ hybridization are widely used techniques for the detection of target proteins and mRNA present in cells of a tissue section 5, 6, 7. Here we present a simple technique to generate high quality cryosections of embryoid bodies. This approach relies on the spatial orientation of EB embedding in OCT followed by the cryosection technique. The resulting sections can be subjected to a wide variety of analytical procedures in order to characterize populations of cells containing certain proteins, RNA or DNA. In this sense, the preparation of EB cryosections (10&mu;m) are essential tools for histology staining analysis (e.g. Hematoxilin and Eosin, DAPI), immunofluorescence (e.g. Oct4, nestin) or in situ hybridization. This technique can also help to understand aspects of embryogenesis with regards to the maintenance of the tri-dimensional spherical structure of EBs.

Pluripotent stem cells growing in suspension differentiate into embryoid bodies (EBs). Here we demonstrate how to obtain high quality EB cryosections useful for studying cellular and molecular aspects of embryogenesis, while preserving their organization as aggregates.

Analisi delle cellule staminali pluripotenti utilizzando criosezioni di corpi embrionali

Embryonic stem (ES) cells are pluripotent cells derived from the inner cell mass of blastocyst-stage early mammalian embryos 1. A crucial stage in the ...

Ricerca

Biologia

Transfecting and Nucleofecting Human Induced Pluripotent Stem Cells

Genetic modification is continuing to be an essential tool in studying stem cell biology and in setting forth potential clinical applications of human embryonic stem cells (HESCs)1. While improvements in several gene delivery methods have been described2-9, transfection remains a capricious process for HESCs, and has not yet been reported in human induced pluripotent stem cells (iPSCs). In this video, we demonstrate how our lab routinely transfects and nucleofects human iPSCs using plasmid with an enhanced green fluorescence protein (eGFP) reporter. Human iPSCs are adapted and maintained as feeder-free cultures to eliminate the possibility of feeder cell transfection and to allow efficient selection of stable transgenic iPSC clones following transfection. For nucleofection, human iPSCs are pre-treated with ROCK inhibitor11, trypsinized into small clumps of cells, nucleofected and replated on feeders in feeder cell-conditioned medium to enhance cell recovery. Transgene-expressing human iPSCs can be obtained after 6 hours. Antibiotic selection is applied after 24 hours and stable transgenic lines appear within 1 week. Our protocol is robust and reproducible for human iPSC lines without altering pluripotency of these cells.

Despite recent advancements in genetic modification, transfection of human embryonic stem cells (HESCs) remains a capricious process. To our knowledge, systematic and efficient methods to transfect human induced pluripotent stem cells (iPSCs) have not been reported. Here, we describe robust protocols to efficiently transfect and nucleofect human iPSCs.

Trasfettando e Nucleofecting umani cellule staminali pluripotenti indotte

Genetic modification is continuing to be an essential tool in studying stem cell biology and in setting forth potential clinical applications of human ...

Efficient Derivation of Human Cardiac Precursors and Cardiomyocytes from Pluripotent Human Embryonic Stem Cells with Small Molecule Induction

To date, the lack of a suitable human cardiac cell source has been the major setback in regenerating the human myocardium, either by cell-based transplantation or by cardiac tissue engineering1-3. Cardiomyocytes become terminally-differentiated soon after birth and lose their ability to proliferate. There is no evidence that stem/progenitor cells derived from other sources, such as the bone marrow or the cord blood, are able to give rise to the contractile heart muscle cells following transplantation into the heart1-3. The need to regenerate or repair the damaged heart muscle has not been met by adult stem cell therapy, either endogenous or via cell delivery1-3. The genetically stable human embryonic stem cells (hESCs) have unlimited expansion ability and unrestricted plasticity, proffering a pluripotent reservoir for in vitro derivation of large supplies of human somatic cells that are restricted to the lineage in need of repair and regeneration4,5. Due to the prevalence of cardiovascular disease worldwide and acute shortage of donor organs, there is intense interest in developing hESC-based therapies as an alternative approach. However, how to channel the wide differentiation potential of pluripotent hESCs efficiently and predictably to a desired phenotype has been a major challenge for both developmental study and clinical translation. Conventional approaches rely on multi-lineage inclination of pluripotent cells through spontaneous germ layer differentiation, resulting in inefficient and uncontrollable lineage-commitment that is often followed by phenotypic heterogeneity and instability, hence, a high risk of tumorigenicity6-8 (see a schematic in Fig. 1A). In addition, undefined foreign/animal biological supplements and/or feeders that have typically been used for the isolation, expansion, and differentiation of hESCs may make direct use of such cell-specialized grafts in patients problematic9-11. To overcome these obstacles, we have resolved the elements of a defined culture system necessary and sufficient for sustaining the epiblast pluripotence of hESCs, serving as a platform for de novo derivation of clinically-suitable hESCs and effectively directing such hESCs uniformly towards clinically-relevant lineages by small molecules12 (see a schematic in Fig. 1B). After screening a variety of small molecules and growth factors, we found that such defined conditions rendered nicotinamide (NAM) sufficient to induce the specification of cardiomesoderm direct from pluripotent hESCs that further progressed to cardioblasts that generated human beating cardiomyocytes with high efficiency (Fig. 2). We defined conditions for induction of cardioblasts direct from pluripotent hESCs without an intervening multi-lineage embryoid body stage, enabling well-controlled efficient derivation of a large supply of human cardiac cells across the spectrum of developmental stages for cell-based therapeutics.

We have established a protocol for induction of cardioblasts direct from pluripotent human embryonic stem cells maintained under defined conditions with small molecules, which enables derivation of a large supply of human cardiac progenitors and functional cardiomyocytes for cardiovascular repair.

Derivazione efficiente dei diritti dell&#39;uomo e precursori cardiaci e cardiomiociti pluripotenti da cellule staminali embrionali umane con induzione piccole molecole

To date, the lack of a suitable human cardiac cell source has been the major setback in regenerating the human myocardium, either by cell-based ...

Reprogramming Human Somatic Cells into Induced Pluripotent Stem Cells (iPSCs) Using Retroviral Vector with GFP

Human embryonic stem cells (hESCs) are pluripotent and an invaluable cellular sources for in vitro disease modeling and regenerative medicine1. It has been previously shown that human somatic cells can be reprogrammed to pluripotency by ectopic expression of four transcription factors (Oct4, Sox2, Klf4 and Myc) and become induced pluripotent stem cells (iPSCs)2-4 . Like hESCs, human iPSCs are pluripotent and a potential source for autologous cells. Here we describe the protocol to reprogram human fibroblast cells with the four reprogramming factors cloned into GFP-containing retroviral backbone4. Using the following protocol, we generate human iPSCs in 3-4 weeks under human ESC culture condition. Human iPSC colonies closely resemble hESCs in morphology and display the loss of GFP fluorescence as a result of retroviral transgene silencing. iPSC colonies isolated mechanically under a fluorescence microscope behave in a similar fashion as hESCs. In these cells, we detect the expression of multiple pluripotency genes and surface markers.

Reprogramming Human Somatic Cells into Induced Pluripotent Stem Cells iPSCs Using Retroviral Vector with GFP

A method to generate human induced pluripotent stem cells (iPSCs) via retrovirus-mediated ectopic expression of OCT4, SOX2, KLF4 and MYC is described. A practical way to identify human iPSC colonies based on GFP expression is also discussed.

Riprogrammare cellule somatiche umane in cellule staminali pluripotenti indotte (iPSCs) Utilizzo vettore retrovirale con GFP

Human embryonic stem cells (hESCs) are pluripotent and an invaluable cellular sources for in vitro disease modeling and regenerative medicine1. It has ...

Generation of Human Induced Pluripotent Stem Cells from Peripheral Blood Using the STEMCCA Lentiviral Vector

Through the ectopic expression of four transcription factors, Oct4, Klf4, Sox2 and cMyc, human somatic cells can be converted to a pluripotent state, generating so-called induced pluripotent stem cells (iPSCs)1-4. Patient-specific iPSCs lack the ethical concerns that surround embryonic stem cells (ESCs) and would bypass possible immune rejection. Thus, iPSCs have attracted considerable attention for disease modeling studies, the screening of pharmacological compounds, and regenerative therapies5.
We have shown the generation of transgene-free human iPSCs from patients with different lung diseases using a single excisable polycistronic lentiviral Stem Cell Cassette (STEMCCA) encoding the Yamanaka factors6. These iPSC lines were generated from skin fibroblasts, the most common cell type used for reprogramming. Normally, obtaining fibroblasts requires a skin punch biopsy followed by expansion of the cells in culture for a few passages. Importantly, a number of groups have reported the reprogramming of human peripheral blood cells into iPSCs7-9. In one study, a Tet inducible version of the STEMCCA vector was employed9, which required the blood cells to be simultaneously infected with a constitutively active lentivirus encoding the reverse tetracycline transactivator. In contrast to fibroblasts, peripheral blood cells can be collected via minimally invasive procedures, greatly reducing the discomfort and distress of the patient. A simple and effective protocol for reprogramming blood cells using a constitutive single excisable vector may accelerate the application of iPSC technology by making it accessible to a broader research community. Furthermore, reprogramming of peripheral blood cells allows for the generation of iPSCs from individuals in which skin biopsies should be avoided (i.e. aberrant scarring) or due to pre-existing disease conditions preventing access to punch biopsies.
Here we demonstrate a protocol for the generation of human iPSCs from peripheral blood mononuclear cells (PBMCs) using a single floxed-excisable lentiviral vector constitutively expressing the 4 factors. Freshly collected or thawed PBMCs are expanded for 9 days as described10,11 in medium containing ascorbic acid, SCF, IGF-1, IL-3 and EPO before being transduced with the STEMCCA lentivirus. Cells are then plated onto MEFs and ESC-like colonies can be visualized two weeks after infection. Finally, selected clones are expanded and tested for the expression of the pluripotency markers SSEA-4, Tra-1-60 and Tra-1-81. This protocol is simple, robust and highly consistent, providing a reliable methodology for the generation of human iPSCs from readily accessible 4 ml of blood.

Here we show a simple and effective protocol for the generation of human iPSCs from 3-4 ml of peripheral blood using a single lentiviral reprogramming vector. Reprogramming of readily available blood cells promises to accelerate the utilization of iPSC technology by making it accessible to a broader research community.

Generazione di cellule pluripotenti indotte umane staminali da sangue periferico mediante il STEMCCA lentivirale Vector

Through the ectopic expression of four transcription factors, Oct4, Klf4, Sox2 and cMyc, human somatic cells can be converted to a pluripotent state, ...

Generation of Human Cardiomyocytes: A Differentiation Protocol from Feeder-free Human Induced Pluripotent Stem Cells

In order to investigate the events driving heart development and to determine the molecular mechanisms leading to myocardial diseases in humans, it is essential first to generate functional human cardiomyocytes (CMs). The use of these cells in drug discovery and toxicology studies would also be highly beneficial, allowing new pharmacological molecules for the treatment of cardiac disorders to be validated pre-clinically on cells of human origin. Of the possible sources of CMs, induced pluripotent stem (iPS) cells are among the most promising, as they can be derived directly from readily accessible patient tissue and possess an intrinsic capacity to give rise to all cell types of the body 1. Several methods have been proposed for differentiating iPS cells into CMs, ranging from the classical embryoid bodies (EBs) aggregation approach to chemically defined protocols 2,3. In this article we propose an EBs-based protocol and show how this method can be employed to efficiently generate functional CM-like cells from feeder-free iPS cells.

Pluripotent stem cells, either embryonic or induced pluripotent stem (iPS) cells, constitute a valuable source of human differentiated cells, including cardiomyocytes. Here, we will focus on cardiac induction of iPS cells, showing how to use them to obtain functional human cardiomyocytes through an embryoid bodies-based protocol.

Generazione di cardiomiociti umani: Un protocollo di differenziazione da alimentatore-Free umani cellule staminali pluripotenti indotte

In order to investigate the events driving heart development and to determine the molecular mechanisms leading to myocardial diseases in humans, it is ...

Induction and Analysis of Epithelial to Mesenchymal Transition

Epithelial to mesenchymal transition (EMT) is essential for proper morphogenesis during development. Misregulation of this process has been implicated as a key event in fibrosis and the progression of carcinomas to a metastatic state. Understanding the processes that underlie EMT is imperative for the early diagnosis and clinical control of these disease states. Reliable induction of EMT in vitro is a useful tool for drug discovery as well as to identify common gene expression signatures for diagnostic purposes. Here we demonstrate a straightforward method for the induction of EMT in a variety of cell types. Methods for the analysis of cells pre- and post-EMT induction by immunocytochemistry are also included. Additionally, we demonstrate the effectiveness of this method through antibody-based array analysis and migration/invasion assays.

A straightforward method is described for the induction of epithelial to mesenchymal transition (EMT) in a variety of cell types. Methods for the analysis of cells in EMT states by immunocytochemistry are included.

Induzione e Analisi dei epiteliale a Mesenchymal Transizione

Epithelial  to mesenchymal transition (EMT) is essential for proper morphogenesis during  development. Misregulation of this  process has been implicated ...

Efficient Generation Human Induced Pluripotent Stem Cells from Human Somatic Cells with Sendai-virus

A few years ago, the establishment of human induced pluripotent stem cells (iPSCs) ushered in a new era in biomedicine. Potential uses of human iPSCs include modeling pathogenesis of human genetic diseases, autologous cell therapy after gene correction, and personalized drug screening by providing a source of patient-specific and symptom relevant cells. However, there are several hurdles to overcome, such as eliminating the remaining reprogramming factor transgene expression after human iPSCs production. More importantly, residual transgene expression in undifferentiated human iPSCs could hamper proper differentiations and misguide the interpretation of disease-relevant in vitro phenotypes. With this reason, integration-free and/or transgene-free human iPSCs have been developed using several methods, such as adenovirus, the piggyBac system, minicircle vector, episomal vectors, direct protein delivery and synthesized mRNA. However, efficiency of reprogramming using integration-free methods is quite low in most cases.
Here, we present a method to isolate human iPSCs by using Sendai-virus (RNA virus) based reprogramming system. This reprogramming method shows consistent results and high efficiency in cost-effective manner.

Here, we present our established method to reprogram human somatic cells into transgene-free human iPSCs with Sendai virus, which shows consistent outcome and enhanced efficiency.

Efficiente generazione indotta umane pluripotenti cellule staminali da cellule somatiche umane con Sendai-virus

A few years ago, the establishment of human induced pluripotent stem cells (iPSCs) ushered in a new era in biomedicine. Potential uses of human iPSCs ...

A Simple Approach to Perform TEER Measurements Using a Self-Made Volt-Amperemeter with Programmable Output Frequency

Transepithelial/endothelial electrical resistance (TEER) has been used since the 1980s to determine confluency and permeability of in vitro barrier model systems. In most cases, chopstick electrodes are used to determine the electric impedance between the upper and lower compartment of a cell culture filter insert system containing cellular monolayers. The filter membrane allows the cells to adhere, polarize, and interact by building tight junctions. This technique has been described with a variety of different cell lines (e.g., cells of the blood-brain barrier, blood-cerebrospinal fluid barrier, or gastrointestinal and pulmonary tract). TEER measurement devices can be readily obtained from different laboratory equipment suppliers. However, there are more cost-effective and customizable solutions imaginable if an appropriate voltammeter is self-assembled. The overall aim of this publication is to set up a reliable device with programmable output frequency that can be used with commercially available chopstick electrodes for TEER measurement.

Here, we demonstrate how to set up an inexpensive volt-amperemeter with programmable output frequency that can be used with commercially available chopstick electrodes for transepithelial/endothelial electrical resistance measurements.

Un approccio semplice per eseguire misurazioni TEER utilizzando un Amperemetro Volt-Amperemeter self-made con frequenza di uscita programmabile

Transepithelial/endothelial electrical resistance (TEER) has been used since the 1980s to determine confluency and permeability of in vitro barrier model ...

Hepatic Progenitor Specification from Pluripotent Stem Cells using a Defined Differentiation System

Liver disease is an escalating global health issue. While liver transplantation is an effective mode of therapy, patient mortality has increased due to shortages in donor organ availability. Organ scarcity also affects the routine supply of human hepatocytes for basic research and the clinic. Therefore, the development of renewable sources of human liver progenitor cells is desirable and is the goal of this study. To be able to effectively generate and deploy human liver progenitors on a large scale, a reproducible hepatic progenitor differentiation system was developed. This protocol aids experimental reproducibility between users in a range of cell cultureware formats and permits differentiations using both, human embryonic and induced pluripotent stem cell lines. These are important advantages over current differentiation systems that will enhance the basic research and may pave the way towards clinical product development.

The goal of this article is to provide a standardized approach to induce human hepatic progenitor differentiation from pluripotent stem cells. The development of this procedure with ready-to-use media formulations offer the user a facile system to generate human liver cells for biomedical research and translation.

Specifica del progenitore epatico da cellule staminali pluripotenti utilizzando un sistema di differenziazione definito

Liver disease is an escalating global health issue. While liver transplantation is an effective mode of therapy, patient mortality has increased due to ...