嗅神経細胞の繊毛のケージド化合物のフラッシュフォトリシス

要約

ケージド化合物の光分解は、様々な生理活性化合物の濃度の急激かつローカライズされた増加の生産を可能にする。ここでは、解離マウス嗅神経細胞における嗅覚情報伝達の研究のためのケージドcAMPまたはケージのCaの光分解を組み合わせたパッチクランプ記録を取得する方法を示します。

要約

ケージド化合物の光分解は、様々な生理活性化合物¹の濃度の急激かつローカライズされた増加の生産を可能にする。ケージド化合物は紫外光のフラッシュと壊れる可能性の化学ケージで生理的に非アクティブに分子である。ここでは、解離マウス嗅神経細胞における嗅覚情報伝達の研究のためのケージド化合物の光分解を組み合わせたパッチクランプ記録を取得する方法を示します。嗅覚情報伝達のプロセス（図1）の受容体に結合する嗅覚は、環状ヌクレオチド依存性（CNG）チャネル^2を開くcAMPの増加につながる嗅神経細胞の繊毛で行われます。 CNGチャネルを通じて、CAエントリは、Ca活性化塩素チャネルを活性化する。我々は、マウス嗅上皮^3、どのようにケージキャンプ⁴の光分解またはCa ^5をケージでCNGチャネルまたはCa活性化塩素チャネルを活性化するから神経細胞を分離する方法を示しています^</>のSup。我々は、パッチクランプ記録をホールセル電圧クランプの設定^8-11の電流を測定するために取られている間、おりから出すのcAMPやCaに毛様体部分に紫外線が点滅を適用するにはフラッシュランプ^6,7を使用してください。

プロトコル

1. Instrumentation

1. To measure the response of olfactory sensory neurons to photolysis of caged compounds we use a flash lamp in combination with a typical patch-clamp recording system including: a patch-clamp amplifier, a recording electrode and a reference electrode connected to the head-stage of a patch-clamp amplifier, a digitizer, a computer, software for data acquisition, micro-manipulators, an epifluorescence microscope, a perfusion system, an anti-vibration table and a Faraday cage (Figure 2).
2. To generate a high-intensity flash of ultraviolet (UV) light we use a Xenon flash lamp (Rapp OptoElectronic JML-C2 Flash Unit, Figure 3A) that functions by discharging a high voltage capacitor across a short-arc flash tube that is filled with Xenon gas^6-7. The light flash can be triggered manually or by the computer, using the same software that controls electrophysiological acquisition.
3. A UV short pass filter optimized for uncaging applications (270-390 nm) is inserted into an output slot of the flash lamp and a quartz fiber optic light guide is connected to the microscope (see 1.5).
4. The intensity of the light flash and therefore the extent of photolysis can be modified by changing specific parameters:
   voltage or capacitance⁶. Indeed, the light intensity is related to the energy stored in the capacitor and depends on the capacitance value and on the voltage across it, according to the standard relation 0.5 CV². One of three capacitance values can be selected on the front panel of our flash lamp (C1=1000 μF, C2=2000 μF, or C3=3000 μF) and the voltage can be varied between 100 to 385 Volts (Figure 3A), producing a stored energy ranging between 5 and 220 J. The flash duration varies from 0.5 to 1 ms at full half maximal width and depends on the selected capacitance value. Before selecting a different capacitance or setting the voltage to a lower value, it is necessary to discharge the capacitor, by selecting the discharge mode on the front panel of the flash lamp (Figure 3A).
   However the light energy is not simply proportional to the stored energy due to manyfold reasons related to the physics of gas discharges and to non-linear losses in the circuit as the electrical energy is increased⁶. To measure the energy associated to a light flash, a joulemeter, as the JM10 provided by RappOptoElectronics, can be used. Note that the energy at the exit of the quartz light guide with UV filter in place is in the range 1-15 mJ per flash, as reported in the user guide of the Rapp OptoElectronic Flash Unit.
   A photodiode assembly (Figure 3B) is provided with the flash lamp unit and can be used to estimate variations of light intensities as a function of C and V. Indeed, the output of the photodiode is proportional to the light intensity. Following the user guide instructions, the light guide is connected to the input of the photodiode assembly, while the output is connected to an oscilloscope. Figure 3C shows the peak output voltage of the photodiode in response to light flashes for the three capacitance values C1, C2, or C3, available in our flash lamp unit, versus the applied voltage. These values will change as the flash bulb becomes old. It is a good practice to regularly use the photodiode to check the deterioration of the flash bulb.
   Instead of modifying the capacitance and/or voltage on the front panel, a more precise and faster control of light intensity is obtained by placing neutral density filters into a second filter slot of the flash lamp (Figure 3A). This approach is quicker and additionally the flash duration, that depends on the selected capacitance value, is not modified. With neutral density filters ranging from 100% to 0.1 % transmission the flash intensity can be quickly modified over a large range.
5. The light flash is directed to the neuron, plated on glass-bottom dishes, through a quartz fiber optic light guide (Figure 2). The light guide is connected to the epifluorescence attachment of the inverted microscope using an adapter. A modified filter cube without excitation filter directs the UV beam to the neuron by a dichroic mirror.
6. The light is focused through a 100x oil immersion objective. The area covered by the flash is visualized by inserting the light guide into an illuminator that provides a continuous source of visible light. The image (represented in yellow in the video) is viewed on a monitor through a CCD camera connected to the microscope. The contour of the illuminated area is drawn on the monitor to localize the UV flash area for the experiments. Before delivering the UV flash, the ciliary region of the neuron is brought into the area drawn on the monitor.
7. The dimension of the spot of UV light is controlled by the objective magnification, the diameter of the light guide, and the position of the light guide at the back of the microscope. We use a 100x magnification oil immersion objective. The diameter of the circular spot is measured by directing the light from an illuminator on a micrometer slide placed on the stage of the microscope. The spot diameter in our set-up is approximately 16, 33, 50 or 105 μm for a light guide with a diameter respectively of 200, 400, 600 or 1250 μm.

2. Preparing solutions

Dissection

1. Ringer’s solution: 140 mM NaCl, 5 mM KCl, 1 mM CaCl₂, 1 mM MgCl₂, 10 mM HEPES, 10 mM glucose, 1 mM sodium pyruvate (pH 7.4 adjusted with 1M NaOH).
2. Stop mix solution: Ringer’s solution with 0.1 mg/ml BSA, 0.3 mg/ml leupeptin, and 0.02 mg/ml DNaseI.
3. Zero-divalent Ringer’s solution: 140 mM NaCl, 5 mM KCl, 10 mM HEPES, 1 mM EDTA, 10 mM glucose, 1 mM sodium pyruvate (pH 7.4 with 1M NaOH). Add 200 μM cysteine and 2 U/ml papain for enzymatic dissociation.
   Note: Sterile filter the solutions for dissection.

Patch-clamp recording solutions

Extracellular solutions

1. Extracellular Ringer’s solution: 140 mM NaCl, 5 mM KCl, 1 mM CaCl₂, 1 mM MgCl₂, 10 mM HEPES, 10 mM glucose, 1 mM sodium pyruvate (pH 7.4 adjusted with 1M NaOH).
2. Low-Ca Ringer’s solution: 140 mM NaCl, 5 mM KCl, 10 mM EGTA, 1 mM MgCl₂, 10 mM HEPES, 10 mM glucose, 1 mM sodium pyruvate (pH 7.4 adjusted with 1M NaOH).

Intracellular solutions

Always prepare and use caged compound solutions in dim light to avoid degradation of caged compounds from ambient light. Protect containers from light using aluminum foil.

Caged cAMP:

1. Make an intracellular solution containing 145 mM KCl, 4 mM MgCl₂, 0.5 mM EGTA, 10 mM HEPES, 1 mM MgATP and 0.1 mM NaGTP (pH 7.4 adjusted with 1M KOH).
2. Make a stock solution dissolving caged cAMP (BCMCM-cAMP⁴) in DMSO at 50 mM. Make aliquots of 5 μl. Store up to one year at -20°C.
3. Dissolve an aliquot of the caged cAMP stock solution in the intracellular solution to obtain a final concentration of 50 μM caged cAMP. Mix using a vortex.
4. Make aliquots of 1 ml of the caged cAMP intracellular solution. Store up to two months at -20°C until use.

Caged Ca:

We prepare intracellular solutions containing 3 mM DMNP-EDTA⁵ 50% loaded with 1.5 mM Ca.

1. Make an intracellular solution containing 140 mM KCl (or CsCl), 10 mM HEPES (pH 7.4 adjusted with 1M KOH or CsOH).
2. Open a vial of 5 mg DMNP-EDTA. Add 52.8 μl of a 0.1 M calcium chloride standard solution and 1 ml of intracellular solution. Mix using a vortex.
3. To avoid uncaging of caged Ca by ambient light, transfer the solution to a tube protected from light with aluminum foil. Add intracellular solution to reach a final volume of 3.5 ml. Mix using a vortex. Make aliquots of about 1 ml of the caged Ca intracellular solution and store up to two months at -20°C until use.

Notes: During experiments, protect caged compound solutions from light using aluminum foil and keep them on ice. Sterile filter the intracellular solution.

3. Dissociation of mouse olfactory sensory neurons

Animals were handled in accordance with the Italian Guidelines for the Use of Laboratory Animals (Decreto Legislativo 27/01/1992, no. 116) and European Union guidelines on animal research (No. 86/609/EEC).

1. Prepare three glass-bottom dishes coated with 10 mg/ml concanavalin-A and 10 mg/ml poly-L-lysine.
2. To prepare for the dissection, prepare 1 ml of zero-divalent Ringer’s solution. Fill two 50 mm Sylgard coated Petri dishes with Ringer’s solution and place them on ice. Also chill a papain-cysteine mix, 0.5 ml of the stop mix solution, and a syringe with a 0.22 μm filter containing about 10 ml Ringer’s solution.
3. Sacrifice a mouse by CO₂ asphyxiation followed by decapitation. Remove the skin overlying the skull, cut along the jaw lines and place the head in a Sylgard coated Petri dish.
4. Place the dish under a stereomicroscope. Using a scalpel, sagitally bisect the head along the midline. Turn half of the head with the medial side up. Carefully remove the septum to expose the turbinates (see also Cygnar et al., 2010¹³).
5. Using number 3 forceps and a scalpel remove turbinates lined with the olfactory epithelium. Transfer to a Sylgard coated Petri dish.
6. Using number 55 superfine forceps, separate the pieces of olfactory epithelium from the attached parts of turbinates. Transfer them to a tube containing 1 ml zero divalent Ringer’s solution. Add the papain and cysteine mix. Using micro-scissors, mince the epithelia and incubate at room temperature for 3 minutes. Gently mince again with micro-scissors and wait for 5 additional minutes.
7. Using a flame-polished Pasteur pipette, transfer to a tube containing 0.5 ml of the stop mix solution.
8. Centrifuge at 300 g (1500 RPM) for 5 minutes. Discard the supernatant and add about 1 ml of filtered Ringer’s solution. Gently triturate with a flame-polished Pasteur pipette.
9. Plate about 0.3 ml of the solution containing the cells in the center of the three glass-bottom dishes. Allow cells to settle for about one hour at +4°C. Add Ringer’s solution.

4. Recording

1. Prepare patch pipettes from borosilicate capillaries to obtain resistances of 3-7 MΩ when filled with intracellular solution.
2. Place one glass-bottom dish containing the dissociated olfactory sensory neurons on the stage of the inverted microscope. Perfuse with Ringer’s solution.
3. Protect a syringe containing the intracellular solution with caged compounds from light with aluminum foil and keep it refrigerated. Work in dim light to avoid degradation of caged compounds from ambient light.
4. Look for an isolated olfactory sensory neuron with intact cilia at 100x magnification. Move the stage of the microscope to position the ciliary region inside the circle drawn on the monitor to localize the previously identified UV flash area.
5. Fill a patch pipette with the intracellular solution containing the caged compound using a flexible needle. Remove bubbles from the pipette tip. Insert the pipette into the holder on the headstage of the patch-clamp amplifier. Approach the soma of the neuron using the micromanipulator and apply gentle suction to obtain a gigaohm seal. Set the voltage at -60 mV and apply additional suction to reach the whole-cell mode using standard patch-clamp techniques¹².
6. Wait for at least two minutes for the diffusion of the caged compound into the cilia.
7. On the computer start a stimulation protocol and record the response. Use a low-pass filter at 1 kHz and digitize at a sample frequency of at least 2 kHz.
8. A typical stimulation protocol clamps the voltage at a constant value and triggers the release of a UV flash from the flash lamp for photolysis of the caged compound in the ciliary region.

5. Representative results:

You should be able to produce local uncaging of caged cAMP or of caged Ca in the ciliary region of an isolated olfactory sensory neuron and record the current response in the whole-cell voltage-clamp configuration.

Figure 4 shows a typical inward current elicited by a UV flash producing photolysis of caged cAMP, recorded at a voltage of -60 mV in the presence of an extracellular low Ca Ringer’s solution. In this condition the inward current is due to Na entry through CNG channels. The rising phase of the current was fast and was fitted by a single exponential function with a time constant of 3.4 ms.

Figure 5A-B show the responses of another olfactory sensory neuron in low Ca and in Ringer’s solution with 1mM Ca. The rising phase of the current at -60 mV became much slower and multiphasic (Figure 5 A-B). This is due to the action of Ca entering the cilia through CNG channels and activating a secondary Cl current¹⁰. The earlier cationic current component, due to activation of CNG, is smaller in 1mM Ca Ringer solution than in low Ca solution because of the block due to the permeating Ca ions that reduce the overall current.

Another way to reduce the increase of Ca in the cilia is to clamp the neuron at +60 mV (Figure 5 C-D). The rising phase of the response due to cAMP uncaging at +60 mV was well described by a single exponential with a time constant of 6.7 ms, indicating the presence of only one current component.

By photoreleasing Ca inside the cilia of an olfactory sensory neuron you should be able to measure a rapidly rising current. This current is carried by Cl ions. Figure 6 A shows inward currents at -50 mV induced by photorelease of caged Ca in response to UV flashes of different intensities. The rising phase of the Ca-activated Cl currents was well described by a single exponential with time constants varying between 3.8 to 5 ms (Figure 6 B).

Figure 1. Olfactory transduction in the cilia of olfactory sensory neurons. Odorant molecules bind to odorant receptors (OR) activating a G protein that in turns activates adenylyl cyclase (ACIII) producing an intracellular increase in cAMP. cAMP opens cyclic nucleotide-gated (CNG) channels allowing the entry of Na and Ca ions. The intracellular Ca increase activates Ca-activated Cl channels. Caged cAMP or caged Ca can be introduced in the cilia diffusing through a patch pipette. A flash of UV light produces photolysis of the caged compound (Modified, with permission, from Pifferi et al. 2006²).

Figure 2. The patch-clamp recording and flash photolysis system. The set-up components include a patch-clamp amplifier, a computer, a digitizer, an epifluorescence microscope, a Xenon flash lamp, a CCD camera and a monitor. Blue and violet lines indicate respectively the visible and UV light path.

Figure 3. Xenon flash lamp. (A) Light source used for flash photolysis of caged compounds. (B) Photodiode module used to evaluate the intensity of the light flash. (C) The light guide from the flash lamp was connected to the input of the photodiode and the output was visualized onto an oscilloscope. One of the three available capacitance values (C1, C2 or C3) was selected on the front panel switch of the flash lamp and the voltage was changed turning the knob on the front panel. The output voltage from the photodiode in response to different flash intensities was plotted versus the applied voltage for each capacitance value: C1 = 1000 μF, C2 = 2000 μF, or C3 = 3000 μF. A 600 μm diameter light guide was used.

Figure 4. Patch-clamp recording in response to photolysis of caged cAMP in low extracellular Ca solution. (A) Whole-cell current response induced in an isolated olfactory sensory neuron by photolysis of caged cAMP localized to the cilia. A UV flash was released at the time indicated by the arrow. The holding potential was -60 mV. (B) The current rising phase was well fitted with a single exponential function (dotted line) with a time constant of 3.4 ms.

Figure 5. Current responses induced by photolysis of caged cAMP in low Ca and in Ringer solutions. (A) An olfactory sensory neuron was bathed in Ringer solution containing 1 mM Ca or in low Ca solution at the holding potential of -60 mV. A UV flash was released at the time indicated by the arrow. (B) Current responses plotted on an expanded timescale showed a multiphasic rising phase in Ringer, while the rising phase was well fitted with a single exponential function (dotted line) with a time constant of 3.5 ms for the response recorded in low Ca solution. (C) Currents responses from the same neuron shown in (A) bathed in Ringer’s solution at the holding potential of -60 and +60 mV. (D) Current responses plotted on an expanded timescale displayed a multiphasic rising phase at -60 mV, whereas at +60 mV the rising phase was well fitted by a single exponential with a time constant of 6.7 ms (dotted line).

Figure 6. Responses to photolysis of caged Ca. (A) Whole-cell currents induced by photolysis of caged Ca at -50 mV. UV flashes were released at the time indicated by the arrow. Flash intensities were varied with neutral density filters. (B) Expanded timescale shows the rapid increase in the current after Ca photorelease. Currents were well fitted by a single exponential function (dotted lines), with time constants of 5, 4.8, 3.8 ms. (Reproduced, with permission, from Boccaccio & Menini, 2007¹⁰).

ディスカッション

パッチクランプ記録と組み合わせケージド化合物のフラッシュの光分解は、生理活性分子の濃度の内側と外側の細胞の両方の急激かつ局所ジャンプを取得するために便利なテクニックです。ケージcompounds1のいくつかの種類が合成され、そしてこの技術は、アクティブまたは利用可能なケージド化合物¹¹のいくつかの光分解によって変調することができるイオンチャネルを発現する培?...

資料

Name	Company	Catalog Number	Comments
機器の	会社	カタログ番号	コメント
顕微鏡にアダプターモジュールフラッシュランプ	ラップオプトエレクトロニクス	フラッシュキューブ70
空気テーブル	TMC	MICRO - G 63から534
デジタイザー	軸索インスツルメンツ	Digidata 1322A
データ収集ソフトウェア	軸索インスツルメンツ	pClamp 8
データ解析ソフトウェア	WaveMetrics社	イゴール
アダプタモジュールのためのミラー	ラップオプトエレクトロニクス	M70/100
電極ホルダー	軸索インスツルメンツ	1 - HL - U
ファラデーのかご	カスタムは行わ
フィルターキューブ	オリンポス	U - MWU	励起フィルターは削除
フラッシュランプ	ラップオプトエレクトロニクス	JML - C2
鉗子デュモン＃55	世界の精密機器	14099
ガラスキャピラリー	世界の精密機器	PG10165 - 4
ガラスボトムディッシュ	世界の精密機器	FD35 - 100
照明器	オリンポス	ハイライト3100
倒立顕微鏡	オリンポス	IX70
マイクロマニピュレータ	Luigs＆ノイマン	SM I
マイクロピペットプラー	ナリシゲ	PP - 830
モニタ	HesaVision	MTB - 01
NDフィルター	オメガオプティカル	変化
客観100X	ツァイス	Fluar 440285	ツァイスやOlympuのどちらかの
客観100X	オリンポス	UPLFLN 100XOI2	ツァイスやオリンパスのどちらか
光学UVショートパスフィルター	ラップオプトエレクトロニクス	SP400
パッチクランプアンプ	軸索インスツルメンツ	Axopatch 200B
フォトダイオードの組立	ラップオプトエレクトロニクス	PDA
石英ライトガイド	ラップオプトエレクトロニクス	変化	我々は、600μmの直径を使用してください
銀線	世界の精密機器	AGT1025
シルバーグランドペレット	ワーナーの楽器	64から1309
キセノン​​アーク燈	ラップオプトエレクトロニクス	XBL - JML

試薬	会社	カタログ番号
BCMCM -ケージドcAMPの	BioLog	B016
ウシ血清アルブミン（BSA）	シグマ	A8806
塩化カルシウム標準液0.1 M	フルカ	21059
ケージのCa：DMNP - EDTA	インビトロジェン	D6814
システイン	シグマ	C9768
コンカナバリンタイプV（ConA）	シグマ	C7275
塩化セシウム	シグマ	C4036
DMSO	シグマ	D8418
DNアーゼI	シグマ	D4527
EDTA	シグマ	E9884
EGTA	シグマ	E4378
グルコース	シグマ	G5767
HEPES	シグマ	H3375
塩化カリウム	シグマ	P3911
KOH	シグマ	P1767
ロイペプチン	シグマ	L0649
MgCl2を	フルカ	63020
パパイン	シグマ	P3125
ポリ- L -リジン	シグマ	P1274
NaClを	シグマ	S9888
NaOHで	シグマ	S5881
NaPyruvate	シグマ	P2256