The authors would like to acknowledge funding from the National Science Foundation (award # 1335550), Utah Water Research Laboratory, Professor Joan McLean and Tessa Guy for their help during the metal/metalloids analysis. The authors also thank Laura Birkhold for her support with the data collection and Danna Olbright.

<ol>
	<li>Dismukes, G. C., Carrieri, D., Bennette, N., Ananyev, G. M., Posewitz, M. C. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Aquatic+phototrophs:+efficient+alternatives+to+land-based+crops+for+biofuels.">Aquatic phototrophs: efficient alternatives to land-based crops for biofuels.</a> Curr Opin Biotechnol. 19 (3), 235-240 (2008).</li><li>Moody, J. W., McGinty, C. M., Quinn, J. C. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Global+evaluation+of+biofuel+potential+from+microalgae.">Global evaluation of biofuel potential from microalgae.</a> Proceedings of the National Academy of Sciences. 111 (23), 8691-8696 (2014).</li><li>Pinto, E., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Heavy+metal-induced+oxidative+stress+in+algae.">Heavy metal-induced oxidative stress in algae.</a> J Phycol. 39 (6), 1008-1018 (2003).</li><li>Gupta, A., Lutsenko, S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Evolution+of+copper+transporting+ATPases+in+eukaryotic+organisms.">Evolution of copper transporting ATPases in eukaryotic organisms.</a> Curr Genomics. 13 (2), 124-133 (2012).</li><li>Perales-Vela, H. V., Pe&#241;a-Castro, J. M., Ca&#241;izares-Villanueva, R. O. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Heavy+metal+detoxification+in+eukaryotic+microalgae.">Heavy metal detoxification in eukaryotic microalgae.</a> Chemosphere. 64 (1), 1-10 (2006).</li><li>Sandau, E., Sandau, P., Pulz, O. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Heavy+metal+sorption+by+microalgae.">Heavy metal sorption by microalgae.</a> Acta Biotechnol. 16 (4), 227-235 (1996).</li><li>Amer, L., Adhikari, B., Pellegrino, J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Technoeconomic+analysis+of+five+microalgae-to-biofuels+processes+of+varying+complexity.">Technoeconomic analysis of five microalgae-to-biofuels processes of varying complexity.</a> Bioresour Technol. 102 (20), 9350-9359 (2011).</li><li>Benemann, J. R., Goebel, R. P., Weissman, J. C., Augenstein, D. C. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Microalgae+as+a+source+of+liquid+fuels.">Microalgae as a source of liquid fuels.</a> Final Technical Report, US Department of Energy, Office of Research. , (1982).</li><li>Benemann, J. R., Oswald, W. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Report+No.+DOE/PC/93204--T5+Other:+ON:+DE97052880;+TRN:+TRN.">Report No. DOE/PC/93204--T5 Other: ON: DE97052880; TRN: TRN.</a> Systems and economic analysis of microalgae ponds for conversion of CO2 to biomass. , (1996).</li><li>Chisti, Y. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Biodiesel+from+microalgae.">Biodiesel from microalgae.</a> Biotechnol Adv. 25 (3), 294-306 (2007).</li><li>Davis, R., Aden, A., Pienkos, P. T. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Techno-economic+analysis+of+autotrophic+microalgae+for+fuel+production.">Techno-economic analysis of autotrophic microalgae for fuel production.</a> Applied Energy. 88 (10), 3524-3531 (2011).</li><li>Jones, S., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Process+design+and+economics+for+the+conversion+of+algal+biomass+to+hydrocarbons:+whole+algae+hydrothermal+liquefaction+and+upgrading.">Process design and economics for the conversion of algal biomass to hydrocarbons: whole algae hydrothermal liquefaction and upgrading.</a> U.S. Department of Energy Bioenergy Technologies Office. , (2014).</li><li>Lundquist, T. J., Woertz, I. C., Quinn, N. W. T., Benemann, J. R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+realistic+technology+and+engineering+assessment+of+algae+biofuel+production.">A realistic technology and engineering assessment of algae biofuel production.</a> Energy Biosciences Institute. , (2010).</li><li>Nagarajan, S., Chou, S. K., Cao, S., Wu, C., Zhou, Z. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=An+updated+comprehensive+techno-economic+analysis+of+algae+biodiesel.">An updated comprehensive techno-economic analysis of algae biodiesel.</a> Bioresour Technol. 145, 150-156 (2011).</li><li>Pienkos, P. T., Darzins, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+promise+and+challenges+of+microalgal-derived+biofuels.">The promise and challenges of microalgal-derived biofuels.</a> Biofuels Bioproducts &amp; Biorefining-Biofpr. 3, 431-440 (2009).</li><li>Richardson, J. W., Johnson, M. D., Outlaw, J. L. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Economic+comparison+of+open+pond+raceways+to+photo+bio-reactors+for+profitable+production+of+algae+for+transportation+fuels+in+the+Southwest.">Economic comparison of open pond raceways to photo bio-reactors for profitable production of algae for transportation fuels in the Southwest.</a> Algal Research. 1 (1), 93-100 (2012).</li><li>Rogers, J. N., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+critical+analysis+of+paddlewheel-driven+raceway+ponds+for+algal+biofuel+production+at+commercial+scales.">A critical analysis of paddlewheel-driven raceway ponds for algal biofuel production at commercial scales.</a> Algal Research. 4, 76-88 (1016).</li><li>Sun, A., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Comparative+cost+analysis+of+algal+oil+production+for+biofuels.">Comparative cost analysis of algal oil production for biofuels.</a> Energy. 36 (8), 5169-5179 (2011).</li><li>Thilakaratne, R., Wright, M. M., Brown, R. C. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+techno-economic+analysis+of+microalgae+remnant+catalytic+pyrolysis+and+upgrading+to+fuels.">A techno-economic analysis of microalgae remnant catalytic pyrolysis and upgrading to fuels.</a> Fuel. 128, 104-112 (2014).</li><li>Quinn, J. C., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Nannochloropsis+production+metrics+in+a+scalable+outdoor+photobioreactor+for+commercial+applications.">Nannochloropsis production metrics in a scalable outdoor photobioreactor for commercial applications.</a> Bioresour Technol. 117, 164-171 (2012).</li><li>Borkenstein, C., Knoblechner, J., Fr&#252;hwirth, H., Schagerl, M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Cultivation+of+Chlorella+emersonii+with+flue+gas+derived+from+a+cement+plant.">Cultivation of Chlorella emersonii with flue gas derived from a cement plant.</a> J Appl Phycol. 23 (1), 131-135 (2010).</li><li>Douskova, I., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Simultaneous+flue+gas+bioremediation+and+reduction+of+microalgal+biomass+production+costs.">Simultaneous flue gas bioremediation and reduction of microalgal biomass production costs.</a> Appl Microbiol Biotechnol. 82 (1), 179-185 (2009).</li><li>Israel, A., Gavrieli, J., Glazer, A., Friedlander, M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Utilization+of+flue+gas+from+a+power+plant+for+tank+cultivation+of+the+red+seaweed+Gracilaria+cornea.">Utilization of flue gas from a power plant for tank cultivation of the red seaweed Gracilaria cornea.</a> Aquaculture. 249 (1-4), 311-316 (2012).</li><li>Napan, K., Teng, L., Quinn, J. C., Wood, B. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=.">.</a> Impact of Heavy Metals from Flue Gas Integration with Microalgae Production. , (2015).</li><li>Eaton, A. D., Clesceri, L. S., Rice, E. W., Greenberg, A. E. 3. 1. 2. 5. B. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Inductively+coupled+plasma/mass+spectrometry+(ICP/MS)+method.">Inductively coupled plasma/mass spectrometry (ICP/MS) method.</a> Standard methods for the examination of water and wastewater. , (2005).</li><li>Smith, M., Compton, J. S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=.">.</a> Matrix effects in the ICP-MS analysis of selenium in saline water samples. , (2004).</li><li>Mehta, S. K., Gaur, J. P. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Use+of+algae+for+removing+heavy+metal+ions+from+wastewater:+progress+and+prospects.">Use of algae for removing heavy metal ions from wastewater: progress and prospects.</a> Crit Rev Biotechnol. 25 (3), 113-152 (2005).</li><li>Eaton, A. D., Clesceri, L. S., Rice, E. W., Greenberg, A. E. 3. 1. 2. 0. B. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Inductively+coupled+plasma+(ICP)+method.">Inductively coupled plasma (ICP) method.</a> Standard methods for the examination of water and wastewater. , (2005).</li></ol>

The authors declare that they have no competing financial interests.

生理食塩水の微細藻類のN.サリナが正常に再現性のある結果と高いバイオマス収率で設計された成長システムに成長させることができます。空輸は、7日間の成長期間にわたって最小の沈降または生物付着とよく混合懸濁培養のために許可された混合します。蛍光灯バンク全体で最小の光の変動も成長に顕著な差が生じていないことが示されています。 研究では、?...

伝統的な地上の作物に比べて微細藻類は、固有の高い太陽光変換効率1,2に起因する高いバイオマスおよび脂質収率を達成することが示されています。高い生産速度での微細藻類の培養は、外部の炭素源を含む様々な栄養素の供給を必要とします。これは、大規模な成長設備は、生産コストを最小限に抑えると同時に、環境の改善を提供するために、このような産業煙道ガスなどの産業廃棄物の流れと統合されることが期待されます。産業廃棄物の炭素は、気体の二酸化炭素の形で、典型的には負微細藻類の生産に影響を与える可能性があり、汚染物質を含有することができます。具体的には、石炭から誘導された煙道ガスは、以下を含む様々な汚染物質を持っているが、燃焼生成物の水と二酸化炭素、ならびに硫黄および窒素、細塵、ダイオキシン類およびフランなどの有機汚染物質の酸化物、及び無機詐欺に限定されるものではありません重金属など汚染物。微細藻類の生産性の重金属として知られているそれらのいくつかと無機物を含むこれらの汚染物質の大部分の影響が検討されていません。これらの要素のいくつかは、しかし、より高い濃度で、それらは細胞機能不全および死3を生成することができ、適切な濃度での栄養素であることができます。 産業煙道ガスと微細藻類の統合直接増殖培地中に無機汚染物質を導入する可能性を有します。石炭ベースの煙道ガスは低に、種々の濃度の無機元素（ 例えば、として、カドミウム、コバルト、クロム、銅、水銀、マンガン、ニッケル、Pb、SbおよびSeの、Snを、VおよびZn）の様々なそのうちのいくつかを持っています濃度は、微細藻類の成長のための栄養素を表します。無機汚染物質は、微細藻類に特異的に結合すると、さらに栄養輸送体を介して内部的に吸着され、高い親和性を有します。一部の無機汚染物質（ すなわち、コバルト、銅、亜鉛およびMn）が関与する酵素の一部を形成する栄養素であります光合成、呼吸およびその他の機能3,4中のd。しかし、過剰の金属及びメタロイドに毒性であり得ます。このような鉛、カドミウム、錫、Sbを、セレン、As及び水銀のような他の要素は、任意の濃度で細胞機能をサポートし、負培養増殖3,5,6に影響を与える可能性があり、非栄養素の金属を表すことが知られていません。これらの汚染物質のいずれかの存在は、微細藻類の細胞機能に対する負の効果をもたらす可能性を有します。さらに、微細藻類で複数の金属の相互作用は、成長動力学を複雑にし、成長に影響を与える可能性を有します。 大規模な経済学は、直接栽培システム7-19の生産にリンクされています。それは質量の99.9と99.4％で、それぞれ20を表すようにまた、オープン軌道池（ORP）またはフォトバイオリアクターのいずれかのための微細藻類の成長システム（PBR）中の培地のリサイクルは重要です。メディア中の無機汚染物質の存在は、最終的にMが制限される可能性がicroalgaeの生産性とによる汚染物質の蓄積へのメディアの再利用。この研究は、実験的に微細藻類培養システムの統合から期待される濃度で、14無機汚染物質（AS、カドミウム、コバルト、クロム、銅、水銀、マンガン、ニッケル、Pb、SbおよびSeの、錫、VおよびZn）の影響を決定しました石炭は、Nの生産性に、煙道ガスを導出してサリナは空輸PBRSで増殖させました。本研究で用いた汚染物質は、石炭ベースの煙道ガスが、一般廃棄物系の煙道ガス、バイオソリッドベースの煙道ガス、都市下水、生成水、減損地下水や海水21-23に存在しないことが示されています。この研究で使用した濃度は、微細藻類の成長システムは、商用PBRシステム20において実証取り込み効率で石炭ベースのCO 2源と統合された場合に予想されるものに基づいています。重金属や無機汚染物質の濃度を支援する詳細な計算はNapanに提示されていますら 24の分析技術は、バイオマス、メディア環境における金属の大部分の分布を把握するために使用されました。提示される方法は、無機汚染物質のストレスとそのエンド運命の定量化の下で微細藻類の生産能力の評価を可能にしました。

<table border="0" cellpadding="0" cellspacing="0">
	<tbody>
		<tr>
			<td colspan="4">Chemicals</td>
		</tr>
		<tr>
			<td>Sodium chloride</td>
			<td>Fisher Scientific</td>
			<td>S271-3</td>
			<td></td>
		</tr>
		<tr>
			<td>Calcium chloride dihydrate</td>
			<td>Fisher Scientific</td>
			<td>C79-500</td>
			<td></td>
		</tr>
		<tr>
			<td>Potassium chloride</td>
			<td>Fisher Scientific</td>
			<td>P217-500</td>
			<td></td>
		</tr>
		<tr>
			<td>Sodium meta silicate nonahydrate&#160;</td>
			<td>Fisher Scientific</td>
			<td>S408-500</td>
			<td></td>
		</tr>
		<tr>
			<td>Magnesium sulfate heptahydrate&#160;</td>
			<td>Fisher Scientific</td>
			<td>M63-500</td>
			<td></td>
		</tr>
		<tr>
			<td>Potassium nitrate</td>
			<td>EMD Chemical</td>
			<td>PX1520-5</td>
			<td></td>
		</tr>
		<tr>
			<td>Potassium phosphate monobasic&#160;</td>
			<td>Fisher Scientific</td>
			<td>P285-500</td>
			<td></td>
		</tr>
		<tr>
			<td>Ammonium ferric citrate</td>
			<td>Fisher Scientific</td>
			<td>I72-500</td>
			<td></td>
		</tr>
		<tr>
			<td>Boric acid</td>
			<td>Fisher Scientific</td>
			<td>A73-500</td>
			<td></td>
		</tr>
		<tr>
			<td>Sodium molybdate, dihydrate</td>
			<td>EMD Chemical</td>
			<td>SX0650-2</td>
			<td></td>
		</tr>
		<tr>
			<td>Manganese chloride tetrahydrate</td>
			<td>Fisher Scientific</td>
			<td>M87-500</td>
			<td></td>
		</tr>
		<tr>
			<td>Zinc sulfate heptahydrate</td>
			<td>Fisher Scientific</td>
			<td>Z68-500</td>
			<td></td>
		</tr>
		<tr>
			<td>Cupric sulfate pentahydrate</td>
			<td>Fisher Scientific</td>
			<td>C489-500</td>
			<td></td>
		</tr>
		<tr>
			<td>Biotin&#160;</td>
			<td>Acros Organics</td>
			<td>230090010</td>
			<td></td>
		</tr>
		<tr>
			<td>Thiamine&#160;</td>
			<td>Acros Organics</td>
			<td>148990100</td>
			<td></td>
		</tr>
		<tr>
			<td>Vitamin B12&#160;</td>
			<td>Acros Organics</td>
			<td>405920010</td>
			<td></td>
		</tr>
		<tr>
			<td>Copper (II) chloride dihydrate&#160;</td>
			<td>Sigma-Aldrich</td>
			<td>221783-100G</td>
			<td>Irritant, Dangerous to the Environment</td>
		</tr>
		<tr>
			<td>Lead (II) chloride&#160;</td>
			<td>Sigma-Aldrich</td>
			<td>268690-250G</td>
			<td>Toxic, Dangerous to the Environment</td>
		</tr>
		<tr>
			<td>Sodium dichromate dihydrate&#160;</td>
			<td>Sigma-Aldrich</td>
			<td>398063-100G</td>
			<td>Oxidizing, Highly Toxic, Dangerous to the Environment</td>
		</tr>
		<tr>
			<td>Cobalt (II) chloride hexahydrate&#160;</td>
			<td>Sigma-Aldrich</td>
			<td>255599-100G</td>
			<td>Toxic, Dangerous to the Environment</td>
		</tr>
		<tr>
			<td>Nickel (II) chloride hexahydrate&#160;</td>
			<td>Sigma-Aldrich</td>
			<td>223387-500G</td>
			<td>Toxic, Dangerous to the Environment</td>
		</tr>
		<tr>
			<td>Sodium (meta) arsenite&#160;</td>
			<td>Sigma-Aldrich</td>
			<td>71287</td>
			<td>Toxic, Dangerous to the Environment</td>
		</tr>
		<tr>
			<td>Cadmium chloride&#160;</td>
			<td>Sigma-Aldrich</td>
			<td>202908-10G</td>
			<td>Highly Toxic, Dangerous to the Environment</td>
		</tr>
		<tr>
			<td>Mercury (II) chloride&#160;</td>
			<td>Sigma-Aldrich</td>
			<td>215465-100G</td>
			<td>Toxic, Dangerous to the Environment</td>
		</tr>
		<tr>
			<td>Tin (II) chloride dihydrate</td>
			<td>Fisher Scientific</td>
			<td>T142-500</td>
			<td>Corrosive. Suitable for Hg analysis. Very hazardous.</td>
		</tr>
		<tr>
			<td>Manganese chloride tetrahydrate</td>
			<td>Fisher Scientific</td>
			<td>M87-500</td>
			<td></td>
		</tr>
		<tr>
			<td>Vanadium (V) oxide</td>
			<td>Acros Organics</td>
			<td>206422500</td>
			<td>Dangerous to the Environment</td>
		</tr>
		<tr>
			<td>Carbon dioxide&#160;</td>
			<td>Air Liquide</td>
			<td>I2301S-1</td>
			<td>Compressed</td>
		</tr>
		<tr>
			<td>Hydrogen peroxide</td>
			<td>H325-500</td>
			<td>Fisher Scientific</td>
			<td>30% in water</td>
		</tr>
		<tr>
			<td>ICP-MS standard</td>
			<td>ICP-MS-6020</td>
			<td>High Purity Standards</td>
			<td></td>
		</tr>
		<tr>
			<td>Mercury standard</td>
			<td>CGHG1-1</td>
			<td>Inorganic Ventures</td>
			<td>1000&#177;6 &#181;g/mL in 5% nitric acid</td>
		</tr>
		<tr>
			<td>Argon</td>
			<td>Air Liquide</td>
			<td></td>
			<td>Compressed</td>
		</tr>
		<tr>
			<td>Helium</td>
			<td>Air Liquide</td>
			<td></td>
			<td>Compressed, ultra high purity</td>
		</tr>
		<tr>
			<td>Hydrogen</td>
			<td>Air Liquide</td>
			<td></td>
			<td>Compressed, ultra high purity</td>
		</tr>
		<tr>
			<td>Nitric acid</td>
			<td>Fisher Scientific</td>
			<td>A509-P212</td>
			<td>67-70% nitric acid, trace metal grade. Caution: manipulate under fume hood.</td>
		</tr>
		<tr>
			<td>Hydrochloric acid</td>
			<td>Fisher Scientific</td>
			<td>A508-P212</td>
			<td>35% hydrochloric acid, trace metal grade. Caution: manipulate under fume hood.</td>
		</tr>
		<tr>
			<td colspan="4">Equipment</td>
		</tr>
		<tr>
			<td>Scientific prevacuum sterilizer</td>
			<td>Steris</td>
			<td>31626A</td>
			<td>SV-120</td>
		</tr>
		<tr>
			<td>Centrifuge</td>
			<td>Thermo Fisher</td>
			<td>46910</td>
			<td>RC-6 Plus</td>
		</tr>
		<tr>
			<td>Spectrophotometer</td>
			<td>Shimadzu</td>
			<td>1867</td>
			<td>UV-1800</td>
		</tr>
		<tr>
			<td>pH controller</td>
			<td>Hanna</td>
			<td>BL981411</td>
			<td>X4</td>
		</tr>
		<tr>
			<td>Rotometer, X5</td>
			<td>Dwyer</td>
			<td>RMA-151-SSV</td>
			<td>T31Y</td>
		</tr>
		<tr>
			<td>Rotometer, X5</td>
			<td>Dwyer</td>
			<td>RMA-26-SSV</td>
			<td>T35Y</td>
		</tr>
		<tr>
			<td>Water bath circulator</td>
			<td>Fisher Scientific</td>
			<td>13-873-45A</td>
			<td></td>
		</tr>
		<tr>
			<td>Compact chiller</td>
			<td>VWR</td>
			<td>13270-120</td>
			<td></td>
		</tr>
		<tr>
			<td>Freeze dryer</td>
			<td>Labconco</td>
			<td>7752020</td>
			<td></td>
		</tr>
		<tr>
			<td>Stir plate</td>
			<td>Fisher Scientific</td>
			<td>11-100-49S</td>
			<td></td>
		</tr>
		<tr>
			<td>pH lab electrode</td>
			<td>Phidgets Inc</td>
			<td>3550</td>
			<td></td>
		</tr>
		<tr>
			<td>Inductively coupled plasma mass spectrometer</td>
			<td>Agilent Technologies</td>
			<td>7700 Series ICP-MS</td>
			<td>Attached to autosampler CETAC ASX-520</td>
		</tr>
		<tr>
			<td>FIAS 100</td>
			<td>Perkin Elmer Instruments</td>
			<td>B0506520</td>
			<td></td>
		</tr>
		<tr>
			<td>Atomic absorption spectrometer</td>
			<td>Perkin Elmer Instruments</td>
			<td>AAnalyst 800</td>
			<td></td>
		</tr>
		<tr>
			<td>Cell heater (quartz)</td>
			<td>Perkin Elmer Instruments</td>
			<td>B3120397</td>
			<td></td>
		</tr>
		<tr>
			<td>Microwave</td>
			<td>Milestone</td>
			<td></td>
			<td>Programmable, maximum power 1200 W</td>
		</tr>
		<tr>
			<td>Microwave rotor</td>
			<td>Milestone</td>
			<td></td>
			<td>Rotor with 24 75 mL Teflon vessels for closed-vessel microwave assisted digestion.</td>
		</tr>
		<tr>
			<td colspan="4">Materials</td>
		</tr>
		<tr>
			<td>0.2 micron syringe filter</td>
			<td>Whatman</td>
			<td>6713-0425</td>
			<td></td>
		</tr>
		<tr>
			<td>0.2 micron syringe filter</td>
			<td>Whatman</td>
			<td>6713-1650</td>
			<td></td>
		</tr>
		<tr>
			<td>0.45 micron syringe filter</td>
			<td>Thermo Fisher</td>
			<td>F2500-3</td>
			<td></td>
		</tr>
		<tr>
			<td>Polystyrene tubes</td>
			<td>Evergreen</td>
			<td>222-2094-050</td>
			<td>17x100 mm w/cap, 16 mL, polysteryne</td>
		</tr>
		<tr>
			<td>Octogonal magnetic&#160;stir&#160;bars</td>
			<td>Fisher scientific</td>
			<td>14-513-60</td>
			<td>Magnets encased in PTFE fluoropolymer</td>
		</tr>
	</tbody>
</table>

quantification of heavy metals and other inorganic contaminants on the productivity of microalgae

再生可能燃料の需要の増加は、微細藻類などの代替原料の実現可能性を調査する研究者を持っています。固有の利点は、高電位収量、廃棄物の流れと非耕地と統合の使用を含みます。大規模な微細藻類の生産システムの栄養要件は、排煙や排水からの栄養分からの二酸化炭素などの産業廃棄物の資源、と栽培システムの結合が必要になります。これらの廃棄物中に存在する無機汚染物質は潜在的にマイナスの生産性に影響を与え、最終用途を制限する微細藻類バイオマスに生物蓄積につながることができます。この研究は、影響の実験的評価とNannochloropsis·サリナの成長の14無機汚染物質（として、カドミウム、コバルト、クロム、銅、水銀、マンガン、ニッケル、Pb、SbおよびSeの、Snを、VおよびZn）の運命に焦点を当てて。微細藻類は、成長mはpH7で984マイクロモルメートル-2秒で照明光バイオリアクターで栽培-1維持しましたEDIA商業石炭排煙システムに見られる組成に基づいて予想されるレベルで無機汚染物質で汚染。バイオマスおよび7日間の成長期間の終了時に培地中に存在する汚染物質は分析的に、水銀のためと同様に、カドミウム、コバルト、クロム、銅、マンガン、ニッケルのための誘導結合プラズマ質量分析法を通して冷蒸気原子吸光分析法を介して定量化しましたPb、SbおよびSeの、錫、VおよびZn。結果はNを示しますサリナは、これらの汚染物質の導入yieldwithバイオマスにおける統計減少した多金属環境に敏感株です。ここで紹介する技術は、藻類の成長を定量化し、無機汚染物質の運命を決定するための適切です。

バイオマス収量 Nの生産この研究のために使用されるPBR方式でサリナ 8.5±0.19グラム/ Lには1g / L -1の成長-1（N = 12）対照反応器および4.0±0.3グラム/ L -1（N = 12）多金属7日間で汚染。実験は三連の反応器及び複数のバッチ全体で再現可能データを生成した。 図2（a）は、3つの独立したPBRSからのサンプリングに基づいて、非常...

Watch this Scientific Journal Video about Quantification of Heavy Metals and Other Inorganic Contaminants on the Productivity of Microalgae at JoVE.com

Quantification of Heavy Metals and Other Inorganic Contaminants on the Productivity of Microalgae

Integration of microalgal cultivation with industrial flue gas will ultimately introduce heavy metals and other inorganic compounds into the growth media. This study presents a procedure used to determine the end fate and impact of heavy metals and inorganic contaminants on the growth of Nannochloropsis salina grown in photobioreactors.

重金属や微細藻類の生産性に関するその他の無機汚染物質の定量

Increasing demand for renewable fuels has researchers investigating the feasibility of alternative feedstocks, such as microalgae. Inherent advantages ...

quantification-heavy-metals-other-inorganic-contaminants-on

Research

JoVE Journal

Environment

15.8K ビュー.  Utah State University. Integration of microalgal cultivation with industrial flue gas will ultimately introduce heavy metals and other inorganic compounds into the growth media. This study presents a procedure used to determine the end fate and impact of heavy metals and inorganic contaminants on the growth of Nannochloropsis salina grown in photobioreactors.

ビデオ: Quantification of Heavy Metals and Other Inorganic Contaminants on the Productivity of Microalgae

Analysis of Fatty Acid Content and Composition in Microalgae

A method to determine the content and composition of total fatty acids present in microalgae is described. Fatty acids are a major constituent of microalgal biomass. These fatty acids can be present in different acyl-lipid classes. Especially the fatty acids present in triacylglycerol (TAG) are of commercial interest, because they can be used for production of transportation fuels, bulk chemicals, nutraceuticals (&omega;-3 fatty acids), and food commodities. To develop commercial applications, reliable analytical methods for quantification of fatty acid content and composition are needed. Microalgae are single cells surrounded by a rigid cell wall. A fatty acid analysis method should provide sufficient cell disruption to liberate all acyl lipids and the extraction procedure used should be able to extract all acyl lipid classes.
With the method presented here all fatty acids present in microalgae can be accurately and reproducibly identified and quantified using small amounts of sample (5 mg) independent of their chain length, degree of unsaturation, or the lipid class they are part of.
This method does not provide information about the relative abundance of different lipid classes, but can be extended to separate lipid classes from each other.
The method is based on a sequence of mechanical cell disruption, solvent based lipid extraction, transesterification of fatty acids to fatty acid methyl esters (FAMEs), and quantification and identification of FAMEs using gas chromatography (GC-FID). A TAG internal standard (tripentadecanoin) is added prior to the analytical procedure to correct for losses during extraction and incomplete transesterification.

A method for the determination of fatty acid content and composition in microalgae based on mechanical cell disruption, solvent based lipid extraction, transesterification, and quantification and identification of fatty acids using gas chromatography is described. A tripentadecanoin internal standard is used to compensate for the possible losses during extraction and incomplete transesterification.

微細藻類中の脂肪酸含量および組成の分析

A method to determine the content and composition of total fatty acids present in microalgae is described. Fatty acids are a major constituent of ...

環境学

A Whole Cell Bioreporter Approach to Assess Transport and Bioavailability of Organic Contaminants in Water Unsaturated Systems

Bioavailability of contaminants is a prerequisite for their effective biodegradation in soil. The average bulk concentration of a contaminant, however, is not an appropriate measure for its availability; bioavailability rather depends on the dynamic interplay of potential mass transfer (flux) of a compound to a microbial cell and the capacity of the latter to degrade the compound. In water-unsaturated parts of the soil, mycelia have been shown to overcome bioavailability limitations by actively transporting and mobilizing organic compounds over the range of centimeters. Whereas the extent of mycelia-based transport can be quantified easily by chemical means, verification of the contaminant-bioavailability to bacterial cells requires a biological method. Addressing this constraint, we chose the PAH fluorene (FLU) as a model compound and developed a water unsaturated model microcosm linking a spatially separated FLU point source and the FLU degrading bioreporter bacterium Burkholderia sartisoli RP037-mChe by a mycelial network of Pythium ultimum. Since the bioreporter expresses eGFP in response of the PAH flux to the cell, bacterial FLU exposure and degradation could be monitored directly in the microcosms via confocal laser scanning microscopy (CLSM). CLSM and image analyses revealed a significant increase of the eGFP expression in the presence of P. ultimum compared to controls without mycelia or FLU thus indicating FLU bioavailability to bacteria after mycelia-mediated transport. CLSM results were supported by chemical analyses in identical microcosms. The developed microcosm proved suitable to investigate contaminant bioavailability and to concomitantly visualize the involved bacteria-mycelial interactions.

A whole cell bioreporter assay with Burkholderia sartisoli RP037-mChe was developed to detect fractions of an organic contaminant (i.e., fluorene) available for bacterial degradation after active transport by mycelia bridging air-filled pores in a water unsaturated model system.

水不飽和システムにおける有機汚染物質の輸送および生物学的利用能を評価するために、全細胞バイオレポーターアプローチ

Bioavailability of contaminants is a prerequisite for their effective biodegradation in soil. The average bulk concentration of a contaminant, however, is ...

Assaying Predatory Feeding Behaviors in Pristionchus and Other Nematodes

This protocol provides multiple methods for the analysis and quantification of predatory feeding behaviors in nematodes. Many nematode species including Pristionchus pacificus display complex behaviors, the most striking of which is the predation of other nematode larvae. However, as these behaviors are absent in the model organism Caenorhabditis elegans, they have thus far only recently been described in detail along with the development of reliable behavioral assays 1. These predatory behaviors are dependent upon phenotypically plastic but fixed mouth morphs making the correct identification and categorization of these animals essential. In P. pacificus there are two mouth types, the stenostomatous and eurystomatous morphs 2, with only the wide mouthed eurystomatous containing an extra tooth and being capable of killing other nematode larvae. Through the isolation of an abundance of size matched prey larvae and subsequent exposure to predatory nematodes, assays including both "corpse assays" and "bite assays" on correctly identified mouth morph nematodes are possible. These assays provide a means to rapidly quantify predation success rates and provide a detailed behavioral analysis of individual nematodes engaged in predatory feeding activities. In addition, with the use of a high-speed camera, visualization of changes in pharyngeal activity including tooth and pumping dynamics are also possible.

Assaying Predatory Feeding Behaviors in Pristionchus and Other Nematodes

Behavioral assays provide powerful tools for understanding neuronal function. Here we present several protocols for quantifying predatory feeding behavior found in the model nematode Pristionchus pacificus and its relatives. Additionally, we provide methods for analyzing predatory feeding adaptations including mouth structures and teeth.

で捕食摂食行動を分析します<em&gt; Pristionchus</em&gt;およびその他の線虫

This protocol provides multiple methods for the analysis and quantification of predatory feeding behaviors in nematodes. Many nematode species including ...

Ecotoxicological Method with Marine Bacteria Vibrio anguillarum to Evaluate the Acute Toxicity of Environmental Contaminants

Bacteria are an important component of the ecosystem, and microbial community alterations can have a significant effect on biogeochemical cycling and food webs. Toxicity testing based on microorganisms are widely used because they are relatively quick, reproducible, cheap, and are not associated with ethical issues. Here, we describe an ecotoxicological method to evaluate the biological response of the marine bacterium Vibrio anguillarum. This method assesses the acute toxicity of chemical compounds, including new contaminants such as nanoparticles, as well as environmental samples. The endpoint is the reduction of bacterial culturability (i.e., the capability to replicate and form colonies) due to exposure to a toxicant. This reduction can be generally referred to as mortality. The test allows for the determination of the LC50, the concentration that causes a 50% decrease of bacteria actively replicating and forming colonies, after a 6 h exposure. The culturable bacteria are counted in terms of colony forming units (CFU), and the &#34;mortality&#34; is evaluated and compared to the control. In this work, the toxicity of copper sulphate (CuSO4) was evaluated. A clear dose-response relationship was observed, with a mean LC50 of 1.13 mg/L, after three independent tests. This protocol, compared to existing methods with microorganisms, is applicable in a wider range of salinity and has no limitations for colored/turbid samples. It uses saline solution as the exposure medium, avoiding any possible interferences of growth medium with the investigated contaminants. The LC50 calculation facilitates comparisons with other bioassays commonly applied to ecotoxicological assessments of the marine environment.

Ecotoxicological Method with Marine Bacteria Vibrio anguillarum to Evaluate the Acute Toxicity of Environmental Contaminants

This work describes a new protocol to assess the ecotoxicity of pollutants, including emerging contaminants such as nanomaterials, using the marine bacterium Vibrio anguillarum. This method allows for the determination of the LC50, or mortality, the concentration that causes a 50% decrease in bacteria culturability, after a 6 h exposure.

海洋細菌の生態毒性学的方法<em&gt; Vibrio anguillarum</em&gt;環境汚染物質の急性毒性を評価する

Bacteria are an important component of the ecosystem, and microbial community alterations can have a significant effect on biogeochemical cycling and food ...

Preparation of DMMTAV and DMDTAV Using DMAV for Environmental Applications: Synthesis, Purification, and Confirmation

Dimethylated thioarsenicals such as dimethylmonothioarsinic acid (DMMTAV) and dimethyldithioarsinic acid (DMDTAV), which are produced by the metabolic pathway of dimethylarsinic acid (DMAV) thiolation, have been recently found in the environment as well as human organs. DMMTAV and DMDTAV can be quantified to determine the ecological effects of dimethylated thioarsenicals and their stability in environmental media. The synthesis method for these compounds is unstandardized, making replicating previous studies challenging. Furthermore, there is a lack of information about storage techniques, including storage of compounds without species transformation. Moreover, because only limited information about synthesis methods is available, there may be experimental difficulties in synthesizing standard chemicals and performing quantitative analysis. The protocol presented herein provides a practically modified synthesis method for the dimethylated thioarsenicals, DMMTAV and DMDTAV, and will help in the quantification of species separation analysis using high performance liquid chromatography in conjunction with inductively coupled plasma mass spectrometry (HPLC-ICP-MS). The experimental steps of this procedure were modified by focusing on the preparation of chemical reagents, filtration methods, and storage.

Preparation of DMMTAV and DMDTAV Using DMAV for Environmental Applications: Synthesis, Purification, and Confirmation

This article presents modified experimental protocols for dimethylmonothioarsinic acid (DMMTAV) and dimethyldithioarsinic acid (DMDTAV) synthesis, inducing dimethylarsinic acid (DMAV) thiolation through mixing of DMAV, Na2S, and H2SO4. The modified protocol provides an experimental guideline, thereby overcoming limitations of the synthesis steps that could have caused experimental failures in quantitative analysis.

DMMTAV DMDTAV環境用 DMAVを使用しての作製: 合成、精製、および確認

Dimethylated thioarsenicals such as dimethylmonothioarsinic acid (DMMTAV) and dimethyldithioarsinic acid (DMDTAV), which are produced by the metabolic ...

Harvesting Venom Toxins from Assassin Bugs and Other Heteropteran Insects

Heteropteran insects such as assassin bugs (Reduviidae) and giant water bugs (Belostomatidae) descended from a common predaceous and venomous ancestor, and the majority of extant heteropterans retain this trophic strategy. Some heteropterans have transitioned to feeding on vertebrate blood (such as the kissing bugs, Triatominae; and bed bugs, Cimicidae) while others have reverted to feeding on plants (most Pentatomomorpha). However, with the exception of saliva used by kissing bugs to facilitate blood-feeding, little is known about heteropteran venoms compared to the venoms of spiders, scorpions and snakes.
One obstacle to the characterization of heteropteran venom toxins is the structure and function of the venom/labial glands, which are both morphologically complex and perform multiple biological roles (defense, prey capture, and extra-oral digestion). In this article, we describe three methods we have successfully used to collect heteropteran venoms. First, we present electrostimulation as a convenient way to collect venom that is often lethal when injected into prey animals, and which obviates contamination by glandular tissue. Second, we show that gentle harassment of animals is sufficient to produce venom extrusion from the proboscis and/or venom spitting in some groups of heteropterans. Third, we describe methods to harvest venom toxins by dissection of anaesthetized animals to obtain the venom glands. This method is complementary to other methods, as it may allow harvesting of toxins from taxa in which electrostimulation and harassment are ineffective. These protocols will enable researchers to harvest toxins from heteropteran insects for structure-function characterization and possible applications in medicine and agriculture.

Although many insects in the suborder Heteroptera (Insecta: Hemiptera) are venomous, their venom composition and the functions of their venom toxins are mostly unknown. This protocol describes methods to harvest heteropteran venoms for further characterization, using electrostimulation, harassment, and gland dissection.

暗殺者のバグやその他のカメムシの昆虫から毒の毒素を収穫

Heteropteran insects such as assassin bugs (Reduviidae) and giant water bugs (Belostomatidae) descended from a common predaceous and venomous ancestor, ...

Evaluation of the Productivity of Social Wasp Colonies (Vespinae) and an Introduction to the Traditional Japanese Vespula Wasp Hunting Technique

For vespine wasps, colony productivity is typically estimated by counting the number of larval cells. This paper presents an improved method that enables researchers to estimate more accurately the number of adults produced, counting the number of meconia (the stools left in the cells by wasp larvae when pupating into adults, per 100 cells) in each comb. This method can be applied before or after colony collapse (i.e., in active or inactive nests). The paper also describes how to locate wild Vespula wasp colonies by &#34;flagging&#34; wasp baits and chasing the wasp collecting them, using a method traditionally performed by local people in central Japan (as illustrated in the associated video). The Vespula chasing method described has several advantages: it is easy to reinitiate the chase from a point where the forager flying back to the nest was lost, and it is easy to pinpoint the nest location as marked wasps often lose their flag at the nest entrance. These methods for estimating colony productivity and collecting nests can be valuable for researchers studying social wasps.

Evaluation of the Productivity of Social Wasp Colonies Vespinae and an Introduction to the Traditional Japanese Vespula Wasp Hunting Technique

This methodological paper evaluates the productivity of a social wasp colony by examining the number of meconia per 100 cells of comb, to estimate the total number of adults the wasps produced. The associated video describes how to search for Vespula wasp nests, a method developed by amateur wasp chasers.

社会的ワスプコロニー(ベスピネー)の生産性の評価と伝統的な日本のベスプラワスプ狩猟技術の紹介

For vespine wasps, colony productivity is typically estimated by counting the number of larval cells. This paper presents an improved method that enables ...

Cultivation of Green Microalgae in Bubble Column Photobioreactors and an Assay for Neutral Lipids

There is significant interest in the study of microalgae for engineering applications such as the production of biofuels, high value products, and for the treatment of wastes. As most new research efforts begin at laboratory scale, there is a need for cost-effective methods for culturing microalgae in a reproducible manner. Here, we communicate an effective approach to culture microalgae in laboratory-scale photobioreactors, and to measure the growth and neutral lipid content of that algae. Instructions are also included on how to set up the photobioreactor system. Although the example organisms are species of Chlorella and Auxenochlorella, this system can be adapted to cultivate a wide range of microalgae, including co-cultures of algae with non-algae species. Stock cultures are first grown in bottles to produce inoculum for the photobioreactor system. Algae inoculum is concentrated and transferred to photobioreactors for cultivation in batch mode. Samples are collected daily for the optical density readings. At the end of the batch culture, cells are harvested by centrifuge, washed, and freeze dried to obtain a final dry weight concentration. The final dry weight concentration is used to create a correlation between the optical density and the dry weight concentration. A modified Folch method is subsequently used to extract total lipids from the freeze-dried biomass and the extract is assayed for its neutral lipid content using a microplate assay. This assay has been published previously but protocol steps were included here to highlight critical steps in the procedure where errors frequently occur. The bioreactor system described here fills a niche between simple flask cultivation and fully-controlled commercial bioreactors. Even with only 3-4 biological replicates per treatment, our approach to culturing algae leads to tight standard deviations in the growth and lipid assays.

Here, we present a protocol to construct lab-scale bubble column photobioreactors and use them to culture microalgae. It also provides a method for the determination of the culture growth rate and neutral lipid content.

中性脂質のバブル列フォトバイオリアクターとアッセイで緑の微細藻類の栽培

There is significant interest in the study of microalgae for engineering applications such as the production of biofuels, high value products, and for the ...

Microalgae Cultivation and Biomass Quantification in a Bench-Scale Photobioreactor with Corrosive Flue Gases

Photobioreactors are illuminated cultivation systems for experiments on phototrophic microorganisms. These systems provide a sterile environment for microalgal cultivation with temperature, pH, and gas composition and flow rate control. At bench-scale, photobioreactors are advantageous to researchers studying microalgal properties, productivity, and growth optimization. At industrial scales, photobioreactors can maintain product purity and improve production efficiency. The video describes the preparation and use of a bench-scale photobioreactor for microalgal cultivation, including the safe use of corrosive gas inputs, and details relevant biomass measurements and biomass productivity calculations. Specifically, the video illustrates microalgal culture storage and preparation for inoculation, photobioreactor assembly and sterilization, biomass concentration measurements, and a logistic model for microalgal biomass productivity with rate calculations including maximum and overall biomass productivities. Additionally, since there is growing interest in experiments to cultivate microalgae using simulated or real waste gas emissions, the video will cover the photobioreactor equipment adaptations necessary to work with corrosive gases and discuss safe sampling in such scenarios.

Bench-scale, axenic cultivation facilitates microalgal characterization and productivity optimization before subsequent process scale-up. Photobioreactors provide the necessary control for reliable and reproducible microalgal experiments and can be adapted to safely cultivate microalgae with the corrosive gases (CO2, SO2, NO2) from municipal or industrial combustion emissions.

腐食性煙道ガスを用いたベンチスケール光バイオリアクターにおける微細藻類栽培とバイオマス定量

Photobioreactors are illuminated cultivation systems for experiments on phototrophic microorganisms. These systems provide a sterile environment for ...

Two-Dimensional Visualization and Quantification of Labile, Inorganic Plant Nutrients and Contaminants in Soil

We describe a method for two-dimensional (2D) visualization and quantification of the distribution of labile (i.e., reversibly adsorbed) inorganic nutrient (e.g., P, Fe, Mn) and contaminant (e.g., As, Cd, Pb) solute species in the soil adjacent to plant roots (the &#8216;rhizosphere&#8217;) at sub-millimeter (~100 &#181;m) spatial resolution. The method combines sink-based solute sampling by the diffusive gradients in thin films (DGT) technique with spatially resolved chemical analysis by laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS). The DGT technique is based on thin hydrogels with homogeneously distributed analyte-selective binding phases. The variety of available binding phases allows for the preparation of different DGT gel types following simple gel fabrication procedures. For DGT gel deployment in the rhizosphere, plants are grown in flat, transparent growth containers (rhizotrons), which enable minimal invasive access to a soil-grown root system. After a pre-growth period, DGT gels are applied to selected regions of interest for in situ solute sampling in the rhizosphere. Afterwards, DGT gels are retrieved and prepared for subsequent chemical analysis of the bound solutes using LA-ICP-MS line-scan imaging. Application of internal normalization using 13C and external calibration using matrix-matched gel standards further allows for the quantification of the 2D solute fluxes. This method is unique in its capability to generate quantitative, sub-mm scale 2D images of multi-element solute fluxes in soil-plant environments, exceeding the achievable spatial resolution of other methods for measuring solute gradients in the rhizosphere substantially. We present the application and evaluation of the method for imaging multiple cationic and anionic solute species in the rhizosphere of terrestrial plants and highlight the possibility of combining this method with complementary solute imaging techniques.

This protocol presents a workflow for sub-mm 2D visualization of multiple labile inorganic nutrient and contaminant solute species using diffusive gradients in thin films (DGT) combined with mass spectrometry imaging. Solute sampling and high-resolution chemical analysis are described in detail for quantitative mapping of solutes in the rhizosphere of terrestrial plants.