The authors have no acknowledgements.

1. 준비 : <ol><li> 45 배 줌에 변수 3,5 X로, 탁상 스테레오 현미경을 확보, 200mm 작동 거리, 55-75mm 변수 간 동공 거리와 액세서리 링 라이트를 이끌었다. 유사한 현미경이 작은 테이블에 설정할 수 있습니다, 적절하고 매우 비용이. </li><li> 모아 두 미세 수술 픽업, 하나 해부 가위, 한 바늘 드라이버와 미세 수술기구 세트를 준비; 이 필요 최소한이며, 이는 이러한 연습기구이며, 상한 품질 장비가 필요하지 않은 것으로 고려되어야한다. </li><li> 모든 사례에 대해 9/0 모노 필라멘트 미세 봉합사를 사용합니다. 로컬 슈퍼마켓에서 닭 허벅지 또는 날개와 식품 착색제 시판 주문. </li><li> 20 G의 angio-카테터 닭 대퇴 동맥에 개통 시험에 사용된다. 상완 동맥은 얇은 27 G 카테터가 필요합니다. 이들은 로컬 약국에서 인터넷을 통해 획득 될 수 있거나설정 악기. 식품 착색제를 주입 주사기 시판 구입. </li></ol> 2. 육안 해부 기술 : <ol><li> 대퇴 혈관에 대한 접근 방법은 간단합니다. 닭 허벅지를 들어, 무딘 해부 기술은 단지 대퇴골 간부에 내측 수행 뼈에서 대퇴 근육을 분리하고, 대퇴 동맥, 정맥 신경을 노출. 신경은 더 신경 수리 관행의 다른 유형에 대한 두 개의 다발로 해부 할 수 있습니다. </li><li> 날개의 끝 부분까지 어깨, 가위로 길이 방향으로 피부를, 닭 날개에 닭 상완 동맥을 절개에 액세스하기 위해. 이두근과 삼두근 상완 사이에 실행하는 동맥을 관찰한다. </li></ol> 3. 권장 훈련식이 요법 : <ol><li> 대퇴 동맥과 훈련. 주 : 훈련 요법의 첫 번째 단계는 닭 대퇴 동맥 연습한다. </li></ol><ol><li> 현미경으로 조각을 배치하고 미세 수술 절개를 시작합니다. 기본 조직에서 대퇴 동맥 무료; 수평으로 나눕니다. adventicectomy을 수행합니다. 동맥 내강 위에 놓인 어떤 adventicia 트림 마이크로 픽업 및 마이크로 가위를 사용합니다. 일반 수돗물로 내부 루멘을 씻어. 시작 시간을 기록 </li><li> 문합을 종료 종료를 수행합니다. <ol><li> 운영자 반대측 동맥 뒷벽에 시작한다. 첫 번째 스티치를 놓고; 수직으로 작동하는 경우, 하측에 가로로 작동하는 경우, 좌측에 시작한다. 동맥의 외측 루멘으로부터 다음 동맥 내강쪽으로의 외부에서 바늘 합격. </li><li> 스티치 타이 최초의 이중 매듭을 수행 한 다음 두 개의 싱글 교류 방향을 던졌습니다. 상기 기술로 전체 다시 벽을 완료합니다. </li><li> 만약 하시다하고 있으면 가로 작업 또는 상측 경우 오른쪽부터수직 rking, 외측 루멘으로부터 다음 루멘 외부로부터 단일 스티치를 배치하고. 전술 한 바와 같이 매듭을 묶어. 3.1.2.2에 기재된 절차를 반복 전벽 완료. </li><li> 이것은 당신이 시간 기록을 유지 할 수 있도록 마지막 시간을 기록, 그래서 당신은 당신의 진행을 제어 할 수 있습니다. 주 : 저자는 하나의 방식으로 기술을 선호한다; 그러나 미세 수술 봉합사의 어떤 유형은 훈련 될 수있다. 그가 다른 임상 시나리오를 시도하기 전에 연수생이 방법으로 약 25 미세 수술 문합을 완료 것을 권장합니다. 이들은 정맥 동맥 갭위한 그 래프팅, 신경 수리 끝과 끝, 및 신경 갭의 치료를위한 정맥 도관의 사용을 포함한다. 이 훈련 방법으로 배울 수있는 미세 혈관 수술의 중요한 기술은없는 3.1.2.1에서와 같이 바늘을 수행하기 위해 계속 3.1.2.1로이 기술을 연수 진행을 수행 할 수 있지만, 스티치가 절단되지 않고, 연속 또는 실행 봉합입니다 그들에게 U 절단ntil는 전체 봉합사를 완성하고 마지막에 원래 스티치에 넥타이. </li></ol></li></ol><ol start="2"><li> 상완 동맥와 교육 <ol><li> 현미경으로 조각을 놓습니다. 대퇴부 동맥에 대해 상술 한 바와 같이 절차를 완료. 주 : 유일한 차이점은 크기입니다. 상완 동맥은 대퇴 동맥보다 훨씬 작고 문합은 상당히 도전이다. </li></ol></li><li> 개통 테스트 <ol><li> 함께 모두 혈관 벽을 봉합 바늘에 의한 방해를 확인하기 위해, 문합을 통해 부드러운 20 27 G의 angio-카테터를 교차. </li><li> 제트 누설 테스트하기 위해 동맥에 염료 angio-카테터의 끝으로 상용 식품 착색제와 주사기를 적용하고 관류 </li><li> 바늘, 자신의 병렬 처리 및 촬영 벽의 양을 시각화하기 위해 길이 방향으로 동맥을 엽니 다. </li></ol></li></ol>

<ol>
	<li>Lee, S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Historical+events+on+development+of+experimental+microsurgical+organ+transplantation.">Historical events on development of experimental microsurgical organ transplantation.</a> Yonsei Med J. 45 (6), 1115-1120 (2004).</li><li>Shurey, S., Akelina, Y., Legagneux, J., Malzone, G., Jiga, L., Ghanem, A. M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+rat+model+in+microsurgery+education:+classical+exercises+and+new+horizons.">The rat model in microsurgery education: classical exercises and new horizons.</a> Arch Plast Surg. 41 (3), 201-208 (2014).</li><li>Olabe, J., Olabe, J., Sancho, V. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Human+cadaveric+infusi&#243;n+model+for+neurosurgical+training.">Human cadaveric infusi&#243;n model for neurosurgical training.</a> Surg Neurol. 72, 700-702 (2009).</li><li>Peled, I. J., Kaplan, H. Y., Wexler, M. R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Microsilicone+anastomoses.">Microsilicone anastomoses.</a> Ann Plast Surg. 10 (4), 331-332 (1983).</li><li>Gluer, N. M., Rao, G. S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Canniesburn+&#8220;ever-ready&#8221;+model+to+practise+microsurgery.">Canniesburn &#8220;ever-ready&#8221; model to practise microsurgery.</a> Br J Plast Surg. 43 (3), 381-382 (1990).</li><li>Hino, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Training+in+microvascular+surgery+using+a+Chicken+wing+artery.">Training in microvascular surgery using a Chicken wing artery.</a> Neurosurgery. 52 (6), 1495-1498 (2003).</li><li>Marsh, D. J., Norton, S. E., Mok, J., Patel, H. D., Chen, H. C. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Microsurgical+training+the+Chicken+thigh+model.">Microsurgical training the Chicken thigh model.</a> Ann Plast Surg. 59 (3), 355-356 (2007).</li><li>Jeong, H. S., Moon, M. S., Kim, H. S., Lee, H. K., Yi, S. Y. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Microsurgical+training+with+fresh+chicken+legs+and+their+histological+characteristics.">Microsurgical training with fresh chicken legs and their histological characteristics.</a> Ann Plast Surg. 70 (1), 57-61 (2013).</li><li>Couceiro, J., Ozyurekoglu, T., Sanders, S., Tien, H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Microsurgical+training+regimen+with+nonliving+chicken+models.">Microsurgical training regimen with nonliving chicken models.</a> Microsurgery. 33 (3), 251-252 (2013).</li><li>Phoon, A. F., Gumley, G. J., Rtshiladze, M. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Microsurgical+training+using+a+pulsatile+membrane+pump+and+chicken+thigh:+A+new,+realistic,+practical,+nonliving+educational+model.">Microsurgical training using a pulsatile membrane pump and chicken thigh: A new, realistic, practical, nonliving educational model.</a> Plast Reconstr Surg. 126 (5), 278e-279e (2010).</li><li>Zhou, Y., Gu, X., Xiang, J., Qian, S., Chen, Z. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+comparative+study+on+suture+versus+cuff+anastomosis+in+mouse+cervical+cardiac+transplant.">A comparative study on suture versus cuff anastomosis in mouse cervical cardiac transplant.</a> Exp Clin Transplant. 8 (3), 245-249 (2010).</li></ol>

The authors have nothing to disclose.

The clinical practice of microsurgery requires a continuous practice and a high level of expertise; it&#8217;s applications include free flaps, replantation and revascularization procedures, intracranial &#8211; extracranial anastomoses for neurosurgical procedures, peripheral nerve surgery and others. In spite of the wide variety of procedures that require microsurgical techniques, some of them are seldom performed in many centers. The surgeons therefore need sometimes to maintain their skill level rehearsing the surge...

An ample array of training models have been described for the learning and maintenance of both basic and advanced microsurgical skills. These include living animals1,2, human cadaveric specimens3, inert models4,5 and non-living animal models6-9.The Living animal models, specifically those using rats have been extensively used in the teaching of microsurgery 1,2; and they are considered the current gold standard of training. In spite of their remarkable instructive value, when an intensive or prolonged training is required; economical and ethical concerns can hinder their practical usage. 
Cadaveric models3 offer the opportunity to practice in an environment similar to that of the actual clinical situation; they are unfortunately restricted to anatomy labs and similar facilities, a microscope must be available at the lab as well; these models are therefore not widely available. Inert models such as rubber tubes, or gloves4,5 are cheap, and easily accessible, the required equipment for their application is minimal. The resemblance to a clinical situation is tenuous however; and their application is generally limited to the introductory stages of training, before the trainee starts practicing on rats. To the best of our knowledge Hino6 was the first to propose the use of non-living chicken for the development and maintenance of clinical microsurgical skills. His model is based on the extraction and subsequent usage of the chicken brachial artery from commercial chicken wings. This approach does not need institution review board approval, rodent anaesthesia, laboratory technicians or postoperative care. 
Following Hino&#180;s description of the chicken wing artery model numerous other nonliving animal models were published. The use of commercial chicken thighs was first suggested by Marsh et al.7 who reported the use of the femoral artery, vein and nerve for didactic purposes. This particular model expands the possibilities of training including structures different from the arteries; it permits the trainee to perform a variety of complex procedures such as vein grafts, nerve grafts or fascicular repairs. Jeong et al.8 Further studied Marsh&#8217; chicken thigh model and its applications to the teaching of resident doctors. The authors analysed chicken tissue samples histologically and found that it presented similarities to human tissues. The time to perform an anastomosis by the trainee was significantly reduced by practice in their study. They concluded that &#8220;the femoral neurovascular bundles of chicken are an appropriate and effective model for teaching and practicing microsurgery&#8221;. In 2013 my colleagues and I9 published a microsurgical training regimen that combined both the chicken thigh and the chicken wing models; this approach benefits from the versatility of the chicken thighs and from the limited size of the chicken wing artery which can represent more of a challenge than the femoral vessels for the more advanced trainees. 
On the current manuscript we describe step by step the process of setting up a microsurgical practice station; the materials required, how to dissect the neurovascular structures of each model and how to effectively apply the training regimen.

<table border="0" cellpadding="0" cellspacing="0" width="765">
	<tbody>
		<tr height="42">
			<td height="42" style="height:42px;width:216px;">Name of Material/ Equipment</td>
			<td style="width:243px;">Company</td>
			<td style="width:119px;">Catalog Number</td>
			<td style="width:187px;">Comments/Description</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:216px;">Stereomicroscope</td>
			<td style="width:243px;">Amscope</td>
			<td style="width:119px;">SM-1BX</td>
			<td>Microscope</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:216px;">Led light</td>
			<td style="width:243px;">Amscope</td>
			<td style="width:119px;">LED-80S-YA</td>
			<td>illumination system</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:216px;">Microsurgical instruments set</td>
			<td style="width:243px;">Chen hen microsurgical instruments</td>
			<td style="width:119px;">HC- X803-1</td>
			<td>Microsurgical instruments</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:216px;">Microsurgical sutures</td>
			<td style="width:243px;">S/T microsurgical</td>
			<td style="width:119px;">9/0 Suture</td>
			<td>Sutures</td>
		</tr>
	</tbody>
</table>

step by step: microsurgical training method combining two nonliving animal models

The learning of microsurgical techniques and the maintenance of microsurgical skills have been traditionally based on the use of living animals, mainly laboratory rats. This method although extremely valuable can be economically demanding both for the surgeon and the sponsoring institution; it also requires special training facilities that may not always be available or accessible. Furthermore ethical concerns can limit the use of living animals for training purposes. Alternative training methods, such as inert tubes and gloves have not gained popularity among surgeons since they do not offer an experience similar to that of a clinical situation. Non-living animal models include the use of chicken thighs and wings; they offer a practice experience that resembles a clinical situation to a considerable extent. This type of training is relatively cheap and easily available. The microscope and instruments required can be acquired over the internet, and the chicken pieces can be bought at the local supermarket.
This approach allows a motivated trainee to rehearse different types of surgical techniques several times at a reasonable expense, helping to develop or maintain his surgical expertise if more complex facilities are not available. On the current manuscript we describe how to setup a small practice station, how to dissect the specimens, and how to practice both with the chicken thighs and with the chicken wings in a progressive fashion. This approach takes advantage on the versatility of the chicken thigh model and the small size of the chicken wing Brachial artery.

저자는 본 교육 방법으로 자신의 시간을 chronometered하고 크게 세 번째 주말에 대퇴 동맥의 문합 시간을 단축하기 위해 그것을 보았다. 연수생은 자신의 시간, 자신의 개통 비율과 그의 바늘의 정렬을 체크하여 자신의 기술에 개선을 제어 할 수 있습니다. 이 논문에 설명 된 시스템으로는 탁상 현미경 및 미세 수술 도구의 세트를 포함하고도 1에 도시되어있다. 거시적 해부은 그림 2와 3 대퇴 동맥 미...

Watch this Scientific Journal Video about Step By Step: Microsurgical training method combining two nonliving animal models at JoVE.com

Step By Step: Microsurgical training method combining two nonliving animal models

단계적으로 두 생명이 동물 모델을 결합 미세 수술 훈련 방법

Here we describe how to set up a small microsurgical practice station and a simple and inexpensive method for the training of microsurgery with non-living animal models.

The learning of microsurgical techniques and the maintenance of microsurgical skills have been traditionally based on the use of living animals, mainly ...

step-step-microsurgical-training-method-combining-two-nonliving

Research

JoVE Journal

Medicine

15.1K 조회수.  POVISA Hospital. Here we describe how to set up a small microsurgical practice station and a simple and inexpensive method for the training of microsurgery with non-living animal models. 

비디오: Step By Step: Microsurgical training method combining two nonliving animal models

Detection and Genogrouping of Noroviruses from Children's Stools By Taqman One-step RT-PCR

Noroviruses (NoVs) are the leading cause of outbreaks of sporadic acute gastroenteritis worldwide in humans of all ages. They are important cause of hospitalizations in children with a public health impact similar to that of Rotavirus. NoVs are RNA viruses of great genetic diversity and there is a continuous appearance of new strains. Five genogroups are recognized; GI and GII with their many genotypes and subtypes being the most important for human infection. However, the diagnosis of these two genotypes remains problematic, delaying diagnosis and treatment. 1, 2, 3
For RNA extraction from stool specimens the most commonly used method is the QIAmp Viral RNA commercial kit from Qiagen. This method combines the binding properties of a silica gel membrane, buffers that control RNases and provide optimum binding of the RNA to the column together with the speed of microspin. This method is simple, fast and reliable and is carried out in a few steps that are detailed in the description provided by the manufacturer. 
 Norovirus is second only to rotavirus as the most common cause of diarrhea. Norovirus diagnosis should be available in all studies on pathogenesis of diarrhea as well as in outbreaks or individual diarrhea cases. At present however norovirus diagnosis is restricted to only a few centers due to the lack of simple methods of diagnosis. This delays diagnosis and treatment 1, 2, 3. In addition, due to costs and regulated transportation of corrosive buffers within and between countries use of these manufactured kits poses logistical problems. As a result, in this protocol we describe an alternative, economic, in-house method which is based on the original Boom et al. method4 which uses the nucleic acid binding properties of silica particles together with the anti-nuclease properties of guanidinium thiocyanate.
For the detection and genogrouping (GI and GII) of NoVs isolates from stool specimens, several RT-PCR protocols utilizing different targets have been developed. The consensus is that an RT-PCR using TaqMan chemistry would be the best molecular technique for diagnosis, because it combines high sensitivity, specificity and reproducibility with high throughput and ease of use. Here we describe an assay targeting the open reading frame 1 (ORF1)-ORF2 junction region; the most conserved region of the NoV genome and hence most suitable for diagnosis. For further genetic analysis a conventional RT-PCR that targets the highly variable N-terminal-shell from the major protein of the capsid (Region C) using primers originally described by Kojima et al. 5 is detailed. Sequencing of the PCR product from the conventional PCR enables the differentiation of genotypes belonging to the GI and GII genogroups.

Detection and Genogrouping of Noroviruses from Children&#039;s Stools By Taqman One-step RT-PCR

A One-Step RT-PCR assay for detection and genogroup identification of Norovirus isolates from children&#x2019;s stools, that utilizes primers and TaqMan probes specific to the open reading frame 1 (ORF1)-ORF2 junction region, the most conserved region of the Norovirus genome is described. A non-commercial, cost-effective RNA extraction method is detailed.

Taqman함으로써 어린이 Stools에서 Noroviruses의 감지 및 Genogrouping 한 단계 RT-PCR

Noroviruses (NoVs) are the leading cause of outbreaks of sporadic acute gastroenteritis worldwide in humans of all ages. They are important cause of ...

연구

의학

How to Measure Cortical Folding from MR Images: a Step-by-Step Tutorial to Compute Local Gyrification Index

Cortical folding (gyrification) is determined during the first months of life, so that adverse events occurring during this period leave traces that will be identifiable at any age. As recently reviewed by Mangin and colleagues2, several methods exist to quantify different characteristics of gyrification. For instance, sulcal morphometry can be used to measure shape descriptors such as the depth, length or indices of inter-hemispheric asymmetry3. These geometrical properties have the advantage of being easy to interpret. However, sulcal morphometry tightly relies on the accurate identification of a given set of sulci and hence provides a fragmented description of gyrification. A more fine-grained quantification of gyrification can be achieved with curvature-based measurements, where smoothed absolute mean curvature is typically computed at thousands of points over the cortical surface4. The curvature is however not straightforward to comprehend, as it remains unclear if there is any direct relationship between the curvedness and a biologically meaningful correlate such as cortical volume or surface. To address the diverse issues raised by the measurement of cortical folding, we previously developed an algorithm to quantify local gyrification with an exquisite spatial resolution and of simple interpretation. Our method is inspired of the Gyrification Index5, a method originally used in comparative neuroanatomy to evaluate the cortical folding differences across species. In our implementation, which we name local Gyrification Index (lGI1), we measure the amount of cortex buried within the sulcal folds as compared with the amount of visible cortex in circular regions of interest. Given that the cortex grows primarily through radial expansion6, our method was specifically designed to identify early defects of cortical development.
In this article, we detail the computation of local Gyrification Index, which is now freely distributed as a part of the FreeSurfer Software (<a href="http://surfer.nmr.mgh.harvard.edu/">http://surfer.nmr.mgh.harvard.edu/</a>, Martinos Center for Biomedical Imaging, Massachusetts General Hospital). FreeSurfer provides a set of automated reconstruction tools of the brain's cortical surface from structural MRI data. The cortical surface extracted in the native space of the images with sub-millimeter accuracy is then further used for the creation of an outer surface, which will serve as a basis for the lGI calculation. A circular region of interest is then delineated on the outer surface, and its corresponding region of interest on the cortical surface is identified using a matching algorithm as described in our validation study1. This process is repeatedly iterated with largely overlapping regions of interest, resulting in cortical maps of gyrification for subsequent statistical comparisons (Fig. 1). Of note, another measurement of local gyrification with a similar inspiration was proposed by Toro and colleagues7, where the folding index at each point is computed as the ratio of the cortical area contained in a sphere divided by the area of a disc with the same radius. The two implementations differ in that the one by Toro et al. is based on Euclidian distances and thus considers discontinuous patches of cortical area, whereas ours uses a strict geodesic algorithm and include only the continuous patch of cortical area opening at the brain surface in a circular region of interest.

Measuring gyrification (cortical folding) at any age represents a window into early brain development. Hence, we previously developed an algorithm to measure local gyrification at thousands of points over the hemisphere1. In this paper, we detail the computation of this local gyrification index.

지역 Gyrification 인덱스를 계산하기위한 단계별 자습서 : MR 이미지에서 두피 접기를 측정하는 방법

Cortical folding (gyrification) is determined during the first months of life, so that adverse events occurring during this period leave traces that will ...

A Murine Model of Muscle Training by Neuromuscular Electrical Stimulation

Neuromuscular electrical stimulation (NMES) is a common clinical modality that is widely used to restore1, maintain2 or enhance3-5 muscle functional capacity. Transcutaneous surface stimulation of skeletal muscle involves a current flow between a cathode and an anode, thereby inducing excitement of the motor unit and the surrounding muscle fibers. 
NMES is an attractive modality to evaluate skeletal muscle adaptive responses for several reasons. First, it provides a reproducible experimental model in which physiological adaptations, such as myofiber hypertophy and muscle strengthening6, angiogenesis7-9, growth factor secretion9-11, and muscle precursor cell activation12 are well documented. Such physiological responses may be carefully titrated using different parameters of stimulation (for Cochrane review, see 13). In addition, NMES recruits motor units non-selectively, and in a spatially fixed and temporally synchronous manner14, offering the advantage of exerting a treatment effect on all fibers, regardless of fiber type. Although there are specified contraindications to NMES in clinical populations, including peripheral venous disorders or malignancy, for example, NMES is safe and feasible, even for those who are ill and/or bedridden and for populations in which rigorous exercise may be challenging. 
Here, we demonstrate the protocol for adapting commercially available electrodes and performing a NMES protocol using a murine model. This animal model has the advantage of utilizing a clinically available device and providing instant feedback regarding positioning of the electrode to elicit the desired muscle contractile effect. For the purpose of this manuscript, we will describe the protocol for muscle stimulation of the anterior compartment muscles of a mouse hindlimb.

A murine model of neuromuscular electrical stimulation (NMES), a safe and inexpensive clinical modality, to the anterior compartment muscles is described. This model has the advantage of modifying a readily available clinical device for the purpose of eliciting targeted and specific muscle contractions in mice.

신경근육학 전기적 자극에 의​​해 근육 트레이닝의 Murine 모델

Neuromuscular electrical stimulation (NMES) is a common clinical modality that is widely used to restore1, maintain2 or enhance3-5 muscle functional ...

Training a Sophisticated Microsurgical Technique: Interposition of External Jugular Vein Graft in the Common Carotid Artery in Rats

Neointimal hyperplasia is one the primary causes of stenosis in arterialized veins that are of great importance in arterial coronary bypass surgery, in peripheral arterial bypass surgery as well as in arteriovenous fistulas.1-5 The experimental procedure of vein graft interposition in the common carotid artery by using the cuff-technique has been applied in several research projects to examine the aetiology of neointimal hyperplasia and therapeutic options to address it. 6-8 The cuff prevents vessel anastomotic remodeling and induces turbulence within the graft and thereby the development of neointimal hyperplasia.
Using the superior caval vein graft is an established small-animal model for venous arterialization experiment.9-11 This current protocol refers to an established jugular vein graft interposition technique first described by Zou et al., 9 as well as others.12-14 Nevertheless, these cited small animal protocols are complicated.
To simplify the procedure and to minimize the number of experimental animals needed, a detailed operation protocol by video training is presented. This video should help the novice surgeon to learn both the cuff-technique and the vein graft interposition. Hereby, the right external jugular vein was grafted in cuff-technique in the common carotid artery of 21 female Sprague Dawley rats categorized in three equal groups that were sacrificed on day 21, 42 and 84, respectively. Notably, no donor animals were needed, because auto-transplantations were performed. The survival rate was 100 % at the time point of sacrifice. In addition, the graft patency rate was 60 % for the first 10 operated animals and 82 % for the remaining 11 animals. The blood flow at the time of sacrifice was 8&plusmn;3 ml/min. In conclusion, this surgical protocol considerably simplifies, optimizes and standardizes this complicated procedure. It gives novice surgeons easy, step-by-step instruction, explaining possible pitfalls, thereby helping them to gain expertise fast and avoid useless sacrifice of experimental animals.

Neointimal hyperplasia is the primary cause of stenosis in arterialized veins. We propose a new protocol whereby the right external jugular vein is grafted using the cuff technique in the common carotid artery of Sprague Dawley rats. The survival rate was 100 % at the time point of sacrifice.

쥐 온목 동맥에 개재 외부 경정맥 정맥 이식의 : 정교한 Microsurgical 기술을 교육

Neointimal hyperplasia is one the primary causes of stenosis in arterialized veins that are of great importance in arterial coronary bypass surgery, in ...

An Isolated Working Heart System for Large Animal Models

Since its introduction in the late 19th century, the Langendorff isolated heart perfusion apparatus, and the subsequent development of the working heart model, have been invaluable tools for studying cardiovascular function and disease1-15. Although the Langendorff heart preparation can be used for any mammalian heart, most studies involving this apparatus use small animal models (e.g., mouse, rat, and rabbit) due to the increased complexity of systems for larger mammals1,3,11. One major difficulty is ensuring a constant coronary perfusion pressure over a range of different heart sizes &#8211; a key component of any experiment utilizing this device1,11. By replacing the classic hydrostatic afterload column with a centrifugal pump, the Langendorff working heart apparatus described below allows for easy adjustment and tight regulation of perfusion pressures, meaning the same set-up can be used for various species or heart sizes. Furthermore, this configuration can also seamlessly switch between constant pressure or constant flow during reperfusion, depending on the user&#8217;s preferences. The open nature of this setup, despite making temperature regulation more difficult than other designs, allows for easy collection of effluent and ventricular pressure-volume data.

Most studies involving the Langendorff apparatus use small animal models due to the increased complexity of systems for larger mammals. We describe a Langendorff system for large animal models that allows for use across a range of species, including humans, and relatively easy data acquisition.

큰 동물 모델에 대한 격리 된 작업 심장 시스템

Since its introduction in the late 19th century, the Langendorff isolated heart perfusion apparatus, and the subsequent development of the working heart ...

High-frequency Ultrasound Imaging of Mouse Cervical Lymph Nodes

High-frequency ultrasound (HFUS) is widely employed as a non-invasive method for imaging internal anatomic structures in experimental small animal systems. HFUS has the ability to detect structures as small as 30 &#181;m, a property that has been utilized for visualizing superficial lymph nodes in rodents in brightness (B)-mode. Combining power Doppler with B-mode imaging allows for measuring circulatory blood flow within lymph nodes and other organs. While HFUS has been utilized for lymph node imaging in a number of mouse&#160; model systems, a detailed protocol describing HFUS imaging and characterization of the cervical lymph nodes in mice has not been reported. Here, we show that HFUS can be adapted to detect and characterize cervical lymph nodes in mice. Combined B-mode and power Doppler imaging can be used to detect increases in blood flow in immunologically-enlarged cervical nodes. We also describe the use of B-mode imaging to conduct fine needle biopsies of cervical lymph nodes to retrieve lymph tissue for histological&#160; analysis. Finally, software-aided steps are described to calculate changes in lymph node volume and to visualize changes in lymph node morphology following image reconstruction. The ability to visually monitor changes in cervical lymph node biology over time provides a simple and powerful technique for the non-invasive monitoring of cervical lymph node alterations in preclinical mouse models of oral cavity disease.

This protocol describes the application of high-frequency ultrasound (HFUS) for imaging mouse cervical lymph nodes. This technique optimizes visualization and quantification of cervical lymph node morphology, volume and blood flow. Image-guided biopsy of cervical lymph nodes and processing of lymph tissue for histological evaluation is also demonstrated.

마우스 경부 림프절의 고주파 초음파 이미징

High-frequency ultrasound (HFUS) is widely employed as a non-invasive method for imaging internal anatomic structures in experimental small animal ...

Heterotopic Renal Autotransplantation in a Porcine Model: A Step-by-Step Protocol

Kidney transplantation is the treatment of choice for patients suffering from end-stage renal disease. It offers better life expectancy and higher quality of life when compared to dialysis. Although the last few decades have seen major improvements in patient outcomes following kidney transplantation, the increasing shortage of available organs represents a severe problem worldwide. To expand the donor pool, marginal kidney grafts recovered from extended criteria donors (ECD) or donated after circulatory death (DCD) are now accepted for transplantation. To further improve the postoperative outcome of these marginal grafts, research must focus on new therapeutic approaches such as alternative preservation techniques, immunomodulation, gene transfer, and stem cell administration.
Experimental studies in animal models are the final step before newly developed techniques can be translated into clinical practice. Porcine kidney transplantation is an excellent model of human transplantation and allows investigation of novel approaches. The major advantage of the porcine model is its anatomical and physiological similarity to the human body, which facilitates the rapid translation of new findings to clinical trials. This article offers a surgical step-by-step protocol for an autotransplantation model and highlights key factors to ensure experimental success. Adequate pre- and postoperative housing, attentive anesthesia, and consistent surgical techniques result in favorable postoperative outcomes. Resection of the contralateral native kidney provides the opportunity to assess post-transplant graft function. The placement of venous and urinary catheters and the use of metabolic cages allow further detailed evaluation. For long-term follow-up studies and investigation of alternative graft preservation techniques, autotransplantation models are superior to allotransplantation models, as they avoid the confounding bias posed by rejection and immunosuppressive medication.

Porcine models of organ transplantation provide an important platform to study mechanisms of organ preservation. This article describes a heterotopic porcine renal autotransplantation model, which allows investigating new approaches to improve the outcome of transplantation using marginal kidney grafts.

돼지 모델에서 이소성 신장자가 이식 : 단계별 프로토콜

Kidney transplantation is the treatment of choice for patients suffering from end-stage renal disease. It offers better life expectancy and higher quality ...

A Step by Step Protocol for Subretinal Surgery in Rabbits

Age related macular degeneration (AMD), retinitis pigmentosa, and other RPE related diseases are the most common causes for irreversible loss of vision in adults in industrially developed countries. RPE transplantation appears to be a promising therapy, as it may replace dysfunctional RPE, restore its function, and thereby vision.
Here we describe a method for transplanting a cultured RPE monolayer on a scaffold into the subretinal space (SRS) of rabbits. After vitrectomy xenotransplants were delivered into the SRS using a custom made shooter consisting of a 20-gauge metallic nozzle with a polytetrafluoroethylene (PTFE) coated plunger. The current technique evolved in over 150 rabbit surgeries over 6 years. Post-operative follow-up can be obtained using non-invasive and repetitive in vivo imaging such as spectral domain optical coherence tomography (SD-OCT) followed by perfusion-fixed histology.
The method has well-defined steps for easy learning and high success rate. Rabbits are considered a large eye animal model useful in preclinical studies for clinical translation. In this context rabbits are a cost-efficient and perhaps convenient alternative to other large eye animal models.

Retinal pigment epithelium (RPE) replacement strategies and gene-based therapy are considered for several retinal degenerative conditions. For clinical translation, large eye animal models are required to study surgical techniques applicable in patients. Here we present a rabbit model for subretinal surgery geared towards RPE transplantation, which is versatile and cost-efficient.

토끼의 망막 수술에 대한 단계 프로토콜에 의해 단계

Age related macular degeneration (AMD), retinitis pigmentosa, and other RPE related diseases are the most common causes for irreversible loss of vision in ...

Combining Augmented Reality and 3D Printing to Display Patient Models on a Smartphone

Augmented reality (AR) has great potential in education, training, and surgical guidance in the medical field. Its combination with three-dimensional (3D) printing (3DP) opens new possibilities in clinical applications. Although these technologies have grown exponentially in recent years, their adoption by physicians is still limited, since they require extensive knowledge of engineering and software development. Therefore, the purpose of this protocol is to describe a step-by-step methodology enabling inexperienced users to create a smartphone app, which combines AR and 3DP for the visualization of anatomical 3D models of patients with a 3D-printed reference marker. The protocol describes how to create 3D virtual models of a patient&rsquo;s anatomy derived from 3D medical images. It then explains how to perform positioning of the 3D models with respect to marker references. Also provided are instructions for how to 3D print the required tools and models. Finally, steps to deploy the app are provided. The protocol is based on free and multi-platform software and can be applied to any medical imaging modality or patient. An alternative approach is described to provide automatic registration between a 3D-printed model created from a patient&rsquo;s anatomy and the projected holograms. As an example, a clinical case of a patient suffering from distal leg sarcoma is provided to illustrate the methodology. It is expected that this protocol will accelerate the adoption of AR and 3DP technologies by medical professionals.

Presented here is a method to design an augmented reality smartphone application for the visualization of anatomical three-dimensional models of patients using a 3D-printed reference marker.

증강 현실과 3D 프린팅을 결합하여 스마트폰에 환자 모델 표시

Augmented reality (AR) has great potential in education, training, and surgical guidance in the medical field. Its combination with three-dimensional (3D) ...

Taking the Next Step: a Neural Coaptation Orthotopic Hind Limb Transplant Model to Maximize Functional Recovery in Rat

Limb transplant in particular and vascularized composite allotransplant (VCA) in general have wide therapeutic promise that have been stymied by current limitations in immunosuppression and functional neuromotor recovery. Many animal models have been developed for studying unique features of VCA, but here we present a robust reproducible model of orthotopic hind limb transplant in rats designed to simultaneously investigate both aspects of current VCA limitation: immunosuppression strategies and functional neuromotor recovery. At the core of the model rests a commitment to meticulous, time-tested microsurgical techniques such as hand sewn vascular anastomoses and hand sewn neural coaptation of the femoral nerve and the sciatic nerve. This approach yields durable limb reconstructions that allow for longer lived animals capable of rehabilitation, resumption of daily activities, and functional testing. With short-term treatment of conventional immunosuppressive agents, allotransplanted animals survived up to 70 days post-transplant, and isotransplanted animals provide long lived controls beyond 200 days post-operatively. Evidence of neurologic functional recovery is present by 30 days post operatively. This model not only provides a useful platform for interrogating immunological questions unique to VCA and nerve regeneration, but also allows for in vivo testing of new therapeutic strategies specifically tailored for VCA.

This protocol presents a robust, reproducible model of vascularized composite allotransplant (VCA) geared toward simultaneous study of immunology and functional recovery. The time invested in meticulous technique in a right mid-thigh hind limb orthotopic transplant with hand sewn vascular anastomoses and neural coaptation yields the ability to study functional recovery.

다음 단계: 쥐의 기능적 회복을 극대화하기 위한 신경 응복 성 직교 힌지 이식 모델

Limb transplant in particular and vascularized composite allotransplant (VCA) in general have wide therapeutic promise that have been stymied by current ...