Quantification of Hypopigmentation Activity In Vitro

Podsumowanie

We describe three experimental methods for evaluating the hypopigmentation activity of chemicals in vitro: quantification of 1) cellular tyrosinase activity and 2) melanin content, and 3) measurement of melanin by cellular melanin staining and image analysis.

Streszczenie

This study presents laboratory methods for the quantification of hypopigmentation activity in vitro. Melanin, the major pigment in melanocytes, is synthesized in response to multiple cellular and environmental factors. Melanin protects skin cells from ultraviolet damage, but also has biophysical and biochemical functions. Excessive production or accumulation of melanin in melanocytes can cause dermatological problems, such as freckles, dark spots, melasma, and moles. Therefore, the control of melanogenesis with hypopigmentation agents is important in individuals with clinical or cosmetic needs. Melanin is primarily synthesized in the melanosomes of melanocytes in a complex biochemical process called melanogenesis, which is influenced by extrinsic and intrinsic factors, such as hormones, inflammation, age, and ultraviolet light exposure. We describe three methods to determine the hypopigmentation activity of chemicals or natural substances in melanocytes: measurement of the 1) cellular tyrosinase activity and 2) melanin content, and 3) staining and quantifying cellular melanin with image analysis.

In melanogenesis, tyrosinase catalyzes the rate-limiting step that converts L-tyrosine into 3,4-dihydroxyphenylalanine (L-DOPA) and then into dopaquinone. Therefore, the inhibition of tyrosinase is a primary hypopigmentation mechanism. In cultured melanocytes, tyrosinase activity can be quantified by adding L-DOPA as a substrate and measuring dopaquinone production by spectrophotometry. Melanogenesis can also be measured by quantifying the melanin content. The melanin-containing cellular fraction is extracted with NaOH and melanin is quantified spectrophotometrically. Finally, the melanin content can be quantified by image analysis following Fontana-Masson staining of melanin. Although the results of these in vitro assays may not always be reproduced in human skin, these methods are widely used in melanogenesis research, especially as the initial step to identify potential hypopigmentation activity. These methods can also be used to assess melanocyte activity, growth, and differentiation. Consistent results with the three different methods ensure the validity of the effects.

Wprowadzenie

Melanin plays a critical role in the physiology, pathology, and toxicology of several organs including the skin, eyes, and brain¹. Major functions of melanin are photo-screening and biochemical effects. Melanin absorbs near-infrared and visible light as well as ultraviolet (UV) radiation, with increased absorption rates at shorter wavelengths of light; thus, melanin protects tissues from damage caused by visible light or UV radiation². Melanin is an antioxidant and has an affinity for metals and other toxic chemicals; therefore, it can protect tissues from oxidative and chemical stress³. However, the excessive production of melanin causes dermatological issues.

The quantity and quality of melanin in the skin and iris are the most important determinants of the color of the iris and skin. Individuals may have different skin color preferences; some favor tanned skin, while others favor lighter skin colors. Depending on these consumer profiles, hypopigmentation cosmetics have been developed to satisfy individual markets for favored skin colors⁴. Accordingly, studies of hypopigmentation and anti-melanogenic activity are important both scientifically and practically.

Melanogenesis is the complex process of melanin biosynthesis through a series of enzymatic and spontaneous chemical reactions in melanocytes. One melanocyte is surrounded by approximately 36 keratinocytes and melanocytes are the melanin synthesis factories that distribute their product to neighboring keratinocytes. In skin, the melanin produced and stored in the melanosomal compartment of melanocytes is transported to neighboring keratinocytes in the epidermis via dendrites.

L-Tyrosine serves as the initial substrate for melanogenesis and the enzyme tyrosinase catalyzes two consecutive reactions that convert L-tyrosine into 3,4-dihydroxyphenylalanine (DOPA) and then into dopaquinone. These reactions are the rate-limiting step in melanogenesis^5,6. Accordingly, hypopigmentation activity can first be measured by assessing cellular tyrosinase activity directly. To do so, melanocyte extracts containing tyrosinase are incubated with DOPA and the dopaquinone produced in the samples can be measured by spectrophotometry at 475 nm. The values are normalized by the protein concentrations of the samples, and substances with hypopigmentation activity result in less dopaquinone formation compared with controls.

Secondly, hypopigmentation activity can be quantified by measuring melanin in cultured melanocytes directly. After treating cells with the test material, melanin is extracted under alkaline conditions and the melanin content is quantified by spectrophotometry at 400 nm. A hypopigmentation agent will result in a lower melanin content than the controls⁷.

Finally, the hypopigmentation activity can be quantified by Fontana-Masson melanin staining and subsequent image analysis. In Fontana-Masson staining, melanin granules reduce ammonia-silver nitrate to a visible black metallic state and the black areas of cells in microscopic images represent the amount of melanin.

A hypopigmentation agent usually gives consistent and comparable results with these three methods, which confirms that the activity of the substance is valid. Alternatively, it may be useful to measure the expression of key genes and proteins in melanogenesis in response to a test substance to examine hypopigmentation activity. In addition to tyrosinase, tyrosinase-related proteins (TRP-1) and dopachrome tautomerase (TRP-2) are critical enzymes in melanogenesis⁸. The transcription factor microphthalmia-associated transcription factor (MITF) is a master regulator in melanogenesis and quantification of its gene/protein expression levels or a promoter activity assay can also be used to assess hypopigmentation activity.

Protokół

1. Preparation of Medium, Compounds, and Reagents

1. Prepare B16F10 growth complete medium. Supplement Dulbecco’s modified Eagle’s medium (DMEM) with 10% fetal bovine serum (FBS) and 1% penicillin/streptomycin (PEST).
   1. To make 500 mL of complete medium, mix 445 mL of Dulbecco’s modified Eagle’s medium (DMEM) with 50 mL of FBS and 5 mL of PEST in a 1 L sterilized glass bottle. After mixing gently, filter the medium through a 0.2-µm bottle-top filter to a new sterilized glass bottle and then store at 4 °C.
      CAUTION: All cell culture techniques should be undertaken in microbiological safety cabinet using aseptic technique to ensure sterility.
2. Prepare lysis buffer: 20 mM Tris (hydroxymethyl) aminomethane containing 0.1% Triton X-100 (v/v) buffer at pH 7.5 (pH adjusted with HCl). This buffer can be used for 3 months when stored at room temperature (RT). Add protease inhibitors to the lysis buffer right before use.
3. Prepare tyrosinase inhibitor assay buffer. Prepare 1 M NaH₂PO₄ (monobasic) and 1 M Na₂HPO₄ (dibasic) stock solutions. Mix 46.3 mL of Na₂HPO₄ and 53.7 mL of NaH₂PO₄ to prepare a final volume of 0.1 M sodium phosphate buffer (pH 6.8).
   1. Dilute the resulting mixture to 1 L (final volume) with H₂O. Adjust the pH of the final solution to 6.8. This buffer can be used for 1 month when stored at 4 °C.
4. Prepare tyrosinase substrate solution: 0.1% 3,4-dihydroxy-L-phenylalanine (DOPA, w/v) dissolved in tyrosinase inhibitor assay buffer (refer to Step 1.3).
   CAUTION: Keep on ice while in use.
5. Optionally, prepare 100 U/mL mushroom tyrosinase. Dissolve the lyophilized mushroom tyrosinase in tyrosinase inhibitor assay buffer. This solution can be used for 2 months when stored at –20 °C. The mushroom tyrosinase activity as well as cellular tyrosinase activity are calculated in the presence of cell materials.
   CAUTION: The solution is aliquoted before freezing thus repeated freezing-and-thawing can be avoided. Keep the solution on ice while in use.
6. Prepare 1 N NaOH solution. Weigh 4 g of NaOH in a volumetric flask and dissolve it in distilled water to make 100 mL.
7. Prepare fixation solution (10% formalin). Dilute 27 mL of 37% formaldehyde with 73 mL of distilled water. Prepare fresh daily.
8. Prepare ammoniacal silver stock solution. Prepare 5 mL of 10% silver nitrate solution in a volumetric flask. Add ammonium hydroxide solution dropwise, until the precipitate is completely dissolved. Add 200 μL of silver nitrate solution (10%). The solution will become slightly cloudy.
   CAUTION: Avoid contact and inhalation. Use a fume hood.
9. Prepare ammoniacal silver working solution. Dilute 2.5 mL of ammoniacal silver stock solution with 7.5 mL of distilled water. Use once and then discard.
   CAUTION: Avoid contact and inhalation. Use a fume hood.
10. Prepare 0.1% gold chloride. Prepare 1 mL of 10% gold chloride and add 99 mL of distilled water in a volumetric flask. Prepare fresh daily.
11. Prepare phosphate buffer saline (PBS). Add 8 g of NaCl, 0.2 g of KCl, 1.44 g of Na₂HPO₄ and 0.24 g of KH₂PO₄ in 800 mL of distilled water. Adjust the pH to 7.4 with HCl. Dilute the resulting mixture to 1 L (final volume) with distilled water.
12. Prepare 5% (w/v) sodium thiosulfate solution dissolved in distilled water.

2. Cell Culture and Treatment

1. Use commercially available B16F10 cells. Maintain the B16F10 cells in complete medium. Keep the cell culture flask in a humidified, 5% CO₂ atmosphere incubator at 37 °C.
2. Prepare test compounds, inhibitor positive control, and negative control samples.
   1. Dissolve the test compounds in the appropriate solvents. Dissolve water soluble compounds in double-distilled water. Dissolve water insoluble compounds in appropriate organic solvent, e.g., DMSO.
   2. Here, use arbutin dissolved in double-distilled water (125 μg/mL) as a positive control to assess the hypopigmentation activity compared with test compounds or a negative control. As a negative control (vehicle-treated control), use the solutions or buffers used in the test sample, e.g., double-distilled water, DMSO, ethanol.
3. Cell seeding and treatment
   1. Seed B16F10 cells at 5 × 10⁴ cells/well in 24-well culture plates using complete medium and incubate in a CO₂ incubator for 24 h. After incubation, aspirate the complete medium.
   2. Incubate cells with DMEM medium (without FBS and 1% penicillin/streptomycin) containing either test compounds, an inhibitor control, or a negative control in a CO₂ incubator for 72 h. Check cells every 24 h under the microscope. After this step, go to Steps 3-5 for further experiments.
      CAUTION: The mixture of the test substance and DMEM medium should be filtered through a 0.2 μm filter.

3. Measuring Cellular Tyrosinase Activity

1. Using the method described in Step 2, remove media and rinse cells twice with 300 μL of cold PBS.
2. Place the cell culture plate on ice. Add 300 μL of lysis buffer and incubate for 5 min. Then collect the cell lysate using a cell scraper and transfer the cell lysate to a 1.5-mL microcentrifuge tube.
3. Homogenize the cell lysate with a cell homogenizer at 14,500 rpm for 2 s, 3 times on ice to obtain intracellular tyrosinase. Use the optimum condition specific for the homogenizer.
4. Centrifuge for 10 min at 12,000 × g at 4 °C and transfer the cell supernatant to a 1.5-mL microcentrifuge tube. Keep on ice while in use.
5. Transfer 70 μL of the supernatant to a 96-well clear polystyrene microplate.
6. Add 140 μL of a solution containing tyrosinase substrate (DOPA) to a 96-well clear polystyrene microplate, shake gently, and incubate for 2 h at 37 °C.
7. Optional, add 70 μL of 100 U/mL mushroom tyrosinase solution to each well and incubate for 2 h at 37 °C.
8. Measure the tyrosinase activity at a wavelength of 475 nm using microplate reader.
9. Normalize the tyrosinase activity to the protein concentration of each sample. Measure the protein concentration of each sample by a Bradford assay.

4. Measuring Melanin Content

1. Using the method described in the Step 2, remove media and rinse cells twice with 300 μL of cold PBS. 
2. Place the cell culture plate on ice. Add 300 μL of lysis buffer and incubate for 5 min. Then collect the cell lysate using a cell scraper and transfer the cell lysate to a 1.5-mL microcentrifuge tube.
3. Centrifuge for 10 min at 12,000 × g at 4 °C.
4. Transfer the supernatant to a new tube and measure total protein concentration for normalization. Measure the protein concentration of each sample by a Bradford assay.
5. Add 300 μL of 1 N NaOH to each pellet and incubate at 60 °C for 1 h.
6. Centrifuge the dissolved solution for 10 min at 12,000 × g at 4 °C.
7. Transfer 200 μL of the supernatant to a 96-well microplate.
8. Measure the melanin contents at a wavelength of 400 nm.
9. Normalize the melanin contents to the protein concentration.

5. Fontana–Masson staining

1. Fontana–Masson staining
   1. Wash cells twice with 300 μL of cold PBS.
   2. Add 200 μL of 10% formalin to each well and incubate for 1 h at 4 °C.
   3. Rinse with distilled water.
   4. Add 200 μL of pre-warmed ammoniacal silver working solution and incubate for 1 h at 37 °C or until the cells become yellow/brown in color.
      CAUTION: Place freshly mixed ammoniacal silver working solution in a 58–60°C water bath and allow adequate time for the temperature to equilibrate.
   5. Remove ammoniacal silver working solution and rinse with distilled water.
   6. Remove distilled water. Add 200 μL of 0.1% gold chloride and incubate for 2 min at RT.
   7. Remove 0.1% gold chloride solution and rinse with distilled water.
   8. Remove distilled water. Add 200 μL of sodium thiosulfate solution (5%, w/v) and incubate for 2 min.
   9. Remove sodium thiosulfate solution and rinse with distilled water.
   10. Remove distilled water. Add 200 μL of Nuclear Fast Red and incubate for 5 min.
   11. Remove Nuclear Fast Red and rinse with tap water.
   12. Remove tap water and observe the stained cells under a microscope.
2. Fontana–Masson staining (Threshold Analysis Using ImageJ)
   Note: An example of the image analysis procedure using ImageJ software is shown in the Supplemental Materials.
   1. Open the program ImageJ.
   2. Select File | Open | Microscope Image.
   3. Select Image | Adjust | Color Threshold.
   4. To measure the area stained with Fontana–Masson, set the brightness parameter bar to zero and adjust the brightness bar to find the point at which all stained cells (black or dark brown) are included.
   5. Select Analyze | Analyze Particles. Check the summarize box in the analyze particles window and press OK. Obtain the summary result and paste into a spreadsheet.
      Note: The description of the resulting box parameters are as follows:
      Slice: Name of each image
      Count: Number of stained cells
      Total Area: Total area of the counted cells
      Average Size: Total Area/Count
      % Area: Stained Area/Total Area × 100%; total area is calculated automatically.
   6. Calculate the relative area stained with melanin using the value of Total Area.
      Relative melanin stained area (%) = Value of total cellular area of test sample/average total area of control × 100, i.e.,

Wyniki

Representative results for the hypopigmentation activity of arbutin, an anti-melanogenic compound, in B16F10 melanocytes are shown below. Figure 1A shows that arbutin significantly suppressed the cellular tyrosinase activity compared with the vehicle-treated control. Similarly, the melanin content of cells stimulated with arbutin was significantly reduced compared with the controls (Figure 1B). Microscopic images of cells stained...

Dyskusje

We presented protocols for evaluating the hypopigmentation activity of test compounds using cultured melanocytes. The representative results showed the hypopigmentation effect of arbutin, a tyrosinase inhibitor that inhibited tyrosinase activity and cellular melanin content. These methods are widely used in anti-melanogenic activity research. Using these assays, we have also successfully identified several bioactive compounds that have melanogenesis inhibitory effects on B16F10 cells in the past decade^9...

Materiały

Name	Company	Catalog Number	Comments
3,4-Dihydroxy-l-phenylalanine	Sigma	D9628
Ammonium hydroxide solution	Sigma	#320145
Arbutin	Fluka	#10960
DMEM	HyClone	SH30243.01
FBS	HyClone	SH30084.03
Formalin	Yakuri Pure Chemicals	#16223	37%
Gold chloride	American MasterTech	AHG0226	0.10%
HCl	Samchun chemical	H0255
KCl	Bio basic Canada Inc.	PB0440
KH2PO4	Sigma	#60218
Na2HPO4	J.T.Baker	#3817-01
NaCl	Duksan pure chemicals	#81
NaOH	Sigma	655104
Nuclear fast red	Merck	100121	Nuclear fast red 0.1% in 5% aluminum sulfate.
Penicillin and streptomycin solution	HyClone	SV30010
Silver nitrate	Duksan Pure Chemicals	#900
Sodium phosphate dibasic (Na2HPO4)	J.T. Baker	#3817-01
Sodium phosphate monobasic (Na2HPO4)	Sigma	S5011
Sodium thiosulfate pentahydrate	Duksan Pure Chemicals	#2163
Tris(hydroxymethyl)aminomethane	Bio Basic Canada	TB0196
Triton X-100	Union Carbide	T8787
Tyrosinase from mushroom	Sigma	T3824	25 KU