Targeting Alpha Synuclein Aggregates in Cutaneous Peripheral Nerve Fibers by Free-floating Immunofluorescence Assay

Podsumowanie

Here, we present a protocol for a free-floating indirect immunofluorescence assay on skin biopsy sections that allows for the identification of disease specific conformation variants of alpha synuclein involved in Parkinson disease and multiple proteins of the peripheral nervous system.

Streszczenie

To date, for most neurodegenerative diseases only a post-mortem histopathological definitive diagnosis is available. For Parkinson's disease (PD), the diagnosis still relies only on clinical signs of motor involvement that appear later on in the disease course, when most of the dopaminergic neurons are already lost. Hence, there is a strong need for a biomarker that can identify patients at the beginning of disease or at the risk of developing it. Over the last few years, skin biopsy has proved to be an excellent research and diagnostic tool for peripheral nerve diseases such as small fiber neuropathy. Interestingly, a small fiber neuropathy and alpha synuclein (αSyn) neural deposits have been shown by skin biopsy in PD patients. Indeed, skin biopsy has the great advantage of being an easily accessible, minimally invasive and painless procedure that allows the analysis of peripheral nervous tissue prone to the pathology. Moreover, the possibility of repeating the skin biopsy in the course of the follow-up of the same patient allows studying the longitudinal correlation with the disease progression. We set up a standardized reliable protocol to investigate the presence of αSyn aggregates in skin nerve fibers of the PD patient. This protocol involves few short fixation steps, a cryotome sectioning and then a free-floating immunofluorescence double-staining with two specific antibodies: anti Protein Gene Product 9.5 (PGP9.5) to mark the cutaneous nerve fibers and anti 5G4 for detecting αSyn aggregates. It is a versatile, sensitive and easy to perform protocol that can also be applied for targeting other proteins of interest in skin nerves. The ability to mark αSyn aggregates is another step forward to the use of skin biopsy as a tool for establishing a pre-mortem histopathological diagnosis of PD.

Wprowadzenie

Skin biopsy has acquired a great importance as the diagnostic and research tool in the field of neurological disorders¹. Indeed, epidermis and dermis contain abundant somatic sensory nerve fibers (myelinated and unmyelinated), nociceptive free nerve endings, sensory receptors and autonomic innervation of sweat glands, vessels, sebaceous glands and muscle arrector pilorum².

In the mid-20^th century, the setup for immunohistochemistry of PGP9.5 antibody allowed the evidence of an extensive innervation of human epidermis mammalian skin³. PGP9.5 is a carboxyl-terminal hydrolase equally distributed along axons of both the central and peripheral nervous system (PNS). The availability of this antibody allowed not only to clarify the morphology and anatomy of PNS in the skin but also implemented the study of diseases associated with it^3,4. Skin biopsy contributed to defining a new clinical entity: the small fiber neuropathy. Several international groups demonstrated the association between the loss of intraepidermal nerve fibers and symptoms/signs of small fiber neuropathy⁵ by skin biopsy analysis and provided standardized protocols for nerve morphometry as well as normative reference values to be used in the clinical practice^6,7,8.

Recently a large amount of evidence has shown that neurodegenerative diseases, characterized by misfolded protein accumulations in the central nervous system, are multi-system pathologies⁹. Indeed, PD is characterized by αSyn accumulation in the dopaminergic neuron of substantia nigra, but it has been demonstrated that αSyn and its pathological form, phosphorylated αSyn (P-αSyn), could be detected also in the peripheral tissues. Gastro-intestinal mucosa¹⁰, salivary glands¹¹, skin autonomic fibers surrounding sweat glands and pilomotor muscles^12,13,14, show immunoreactivity to pathogenic forms of αSyn, in accordance with Braak hypothesis that intriguingly postulate that αSyn pathology may begin in PNS well in advance, before its accumulation in the brain¹⁵. Further, the presence of p-αSyn has been demonstrated in skin nerves of patients with REM Behavior Disorders that are considered prodromal PD^16,17 thus skin pathologic αSyn can be considered a promising early peripheral histopathological marker of synucleinopathy.

The association of small fiber neuropathy in PD has been demonstrated previously and it has been found that intraepidermal nerve fibers density reflects disease progression^18,19. Hence, the skin biopsy is a useful tool for studying neurodegeneration in PD and for establishing a pre-mortem histopathological diagnosis of the disease. Indeed, skin biopsy has a great advantage of being an easily accessible and minimally invasive procedure, allowing the analysis of nervous tissue prone to the pathology. Finally, the possibility of repeating the skin biopsy in the course of follow-up of the same patients allows studying the longitudinal correlation with disease progression.

In our laboratory, exploiting a double immuno-staining with PGP9.5 and the conformation-specific monoclonal 5G4 antibody, that recognizes disease specific forms of αSyn including small aggregates^20,21, we were able to show the presence of αSyn aggregates in skin nerves with a promising high diagnostic efficiency¹⁹. Immunofluorescence analysis of the skin biopsy in conformational diseases stands out as a promising source of biomarkers by combining both the detection of protein aggregates and the measure of the neurodegeneration in vivo. Hereafter, we illustrate an easy and versatile protocol on handling the skin biopsy and performing the free-floating immunofluorescence staining for detecting αSyn aggregates. Moreover, this protocol can be adapted for targeting any other protein of interest expressed in skin PNS.

The following study protocol has been used to evaluate the diagnostic utility of aggregated αSyn analysis in the PNS of PD by skin biopsy¹⁹. Inclusion criteria for PD were: a definite clinical diagnosis according to the UK Brain Bank diagnostic criteria, disease duration at least 3 years, no family history, and no major cognitive impairment or major dysautonomic symptoms in the history. Exclusion criteria were known causes of neuropathy (glycated hemoglobin, creatinine, vitamin B12, TSH, serum immunofixation, HIV, HCV, syphilis, and borreliosis). Each subject underwent to 3 mm-diameter skin biopsies at three anatomical sites (neck at C8 dermatomal level, thigh 10 cm above the knee, leg 10 cm above lateral malleolus) on the side, which was clinically more affected. In general, the following protocol is about handling the skin biopsy and performing the free-floating immunofluorescence staining and analysis. Hence it can be adapted and used for the detection of other proteins of interest in skin tissue.

Protokół

The protocol has been approved by the Cantonal Ethics Committee and all enrolled subjects gave written informed consent to the study.

1. Skin Biopsy Collection

1. Let a qualified physician perform the skin biopsy in an appropriate clinical setting.
2. Choose the area to perform the skin biopsy and clean it with an alcohol swab.
3. Prepare the anesthetic solution with 1 cc of lidocaine 2%.
4. With the needle parallel to the area, inject local anesthesia subcutaneously.
5. After checking the effect of anesthesia, take the 3 mm disposable punch and apply rotational and delicate downward pressure to rotate it down through the epidermis and dermis, until the subcutaneous fat is reached.
6. Withdraw the punch.
7. Use disposable forceps to gently pull the skin plug up.
8. Use scissors to cut out the base of the specimen at the level of the fatty tissue.
9. Place the specimen in a tube containing 10 mL of periodate-lysine-paraformaldehyde (PLP) fixative solution.
10. Disinfect the area and cover it with an adhesive bandage.

2. Tissue Fixation and Storage

1. Make fresh PLP fixative solution (see Table 1).
2. Immediately after the collection of the skin biopsy, submerge it in a tube containing 10 mL of PLP fixative solution and incubate it overnight (O/N) at 4 °C.
3. The day after, under the fume hood, remove the PLP fixative gently and in the same tube, wash the biopsy 3 times for 5 min with 5 mL of 0.1 M Sorensen’s solution (Table 1).
4. Discard the Sorensen’s solution and incubate the biopsy with 5 mL of cryo-protectant solution O/N at 4 °C.
5. Store the biopsy at 4 °C if the cut with a cryotome is performed within 1 week; store the biopsy at -20 °C if the cut is performed within 3 months; embed the biopsy in a cryomold (steps 3.2-3.4) and store it at -80 °C to conserve it for a longer period of time.

3. Tissue Cut with a Cryotome

1. Set the cryotome at -20 °C.
2. Take a cryomold and fill it up with the cryo-embedding medium. Avoid creating bubbles.
3. Using tweezers immerse the biopsy into the cryo-embedding medium with the longitudinal axis (epidermis - dermis) parallel to the bottom of the cryomold.
4. Snap freeze the sample with liquid nitrogen to obtain a solid cube of cryo-embedding medium containing the biopsy in the right orientation.
5. Put the sample in the cryostat and wait for 30 min to allow the biopsy to acclimatize.
6. Fix the sample on the cryostat and cut 50 µm sections.
7. With the help of a little brush, transfer the cryo-sections in a 96 well plate containing 200 µL of antifreeze solution in each well. One section per well.
8. Store at -20 °C.
   NOTE: If the analyze the entire biopsy is not analyzed, cut it only partially. In this case, the sections must be stored at -20 °C and the remaining part of the biopsy at -80 °C to conserve it for a longer period of time.

4. Immunofluorescence Staining

1. Fill a 96 well plate, with 100 µL of washing solution.
2. Transfer the sections to be analyzed from the storage plate to the new one containing the washing solution. 1 section per each well (4 sections per anatomical site, per patient: usually a total of 12 sections per patient).
3. Leave the section in the washing solution for 10 min at room temperature (RT). Transfer the section into another well containing the same solution and repeat the wash.
4. Move the sections into new wells containing 100 µL of Blocking solution and incubate for at least 90 min and for a maximum of 4 h at RT.
5. Dilute the primary antibodies anti-PGP9.5 (Rabbit polyclonal, 1:1000) and anti-5G4 (Mouse monoclonal, 1:400) in the working solution.
6. Transfer the sections into new wells containing 100 µL of the working solution of the primary antibodies and incubate them O/N at RT.
7. As step 4.3, wash the sections 2 times for at least 10 min at RT, with 100 µL of washing solution.
8. Dilute the secondary antibodies (conjugate with different fluorophores) Goat anti-Rabbit to detect PGP9.5 (1:700) and a Goat anti-Mouse to detect 5G4 (1:700) in the working solution.
9. Transfer the sections into new wells containing 100 µL of the working solution of the secondary antibodies for 90 min at RT. From this point, cover the 96 well plate with aluminum foil to avoid the bleaching of fluorophore conjugated with secondary antibody/ies.
10. As step 4.3, wash the sections 2 times for at least 10 min, with 100 µL of the washing solution.
11. Transfer the sections into new wells containing 100 µL of DAPI (diluted 1:5,000 in PBS 1x) for 5 min at RT.
12. As step 4.3, wash the sections 2 times for at least 10 min, with 100 µL of the washing solution.
13. Mount the sections on a slide in the correct position avoiding misfolding.
14. Add a few drops of the mounting medium on the slide and cover with a coverslip.
15. Let slides dry O/N before using the confocal/fluorescence microscope.
16. Store the slides in an appropriate box at 4 °C avoiding the light exposure. If accurately stored, the signal will be visible for about 6 months.
    NOTE: The transfer of a section from the 96 well plate containing the newly cut slices to the 96 well plate containing the washing solution (step 4.1) is performed using a small brush that helps to pick up the biopsy. After the transfer of the section into the first well, every time the slice needs to be incubated with a different solution, move it from well to well with the help of the brush.

5. Immunofluorescence Imaging

1. View sections under an inverted fluorescence microscope or a confocal microscope (20X, 40x or higher magnification, use successive frames of 2 µm increments on a Z-stack plan for best results).
2. Acquire images by a microscope connected camera
3. Use an adequate imaging software (i.e. ImageJ) to analyze positive signals in sections in terms of spatial distribution and intensity of the signal. To do this perform the steps mentioned below.
   1. Open the file with ImageJ software.
   2. Click on Image > color > split channels in order to analyze each color channel.
   3. Click Image > stack > Z project to obtain a merge of multiple section acquisitions.
   4. Click Image > color > merge channels to obtain a merge of different color channels of the same acquisition.

Antifreeze solution (store at 4 °C for up to 6 months)	30% Glycerol 30% Ethylene glycol 30% dH2O 10% 2x Phosphate buffer
Blocking solution (prepare at the moment)	4% Normal Goat Serum 1% Triton X-100 in Washing solution
Cryo-protectant (store at 4 °C for up to 6 months)	20% Glycerol 80% Sorensen's solution
Disodium hydrogen phosphate solution (store at RT up to 6 months)	0.45M Disodium hydrogen phosphate (Na2HPO4) in dH2O Filter in a sterile bottle
Lysine solution (store at 4 °C for up to 3 weeks)	50% of 0.3M L-Lysine monohydrochloride solution 50% of 0.1M Sorensen's solution pH7.6 pH 7.4, filter in a sterile bottle
Paraformaldehyde (PFA) 8% (prepare under fume hood and store at 4 °C for up to 1 month)	2.6M PFA in dH2O (to 55°C_do not exceed 60 °C to avoid formic acid formation) filter in a sterile bottle
Phosphate buffer 2x (store at 4 °C for up to 6 months)	6% Monosodium phosphate (NaH2PO4) solution 45% Disodium phosphate (Na2HPO4) solution in dH2O
PLP fixative solution (prepare at the moment, under fume hood )	25% Paraformaldehyde 8% 0.01M Sodium (meta)periodate 75% Lysine solution<
Sodium Dihydrogen Phosphate Monohydrate (store at RT up to 6 months)	0.52M Sodium Dihydrogen Phosphate Monohydrate (NaH2PO4*H2O) in dH2O Filter in a sterile bottle.
Sorensen's solution (store at 4 °C for up to 1 month)	2.5% Monosodium phosphate solution 18.7% Disodium phosphate solution pH7.6, in dH2O
Washing solution (prepare at the moment)	0.25M Trizma base 0.26M NaCl pH7.6, in dH2O
Working solution (prepare at the moment)	50% Blocking solution 50% Washing solution

Table 1: Required solutions. List of required solutions for the protocol and brief description of how to prepare it.

Wyniki

Following the described procedure (Figure 1), we detected αSyn aggregates, labeled with 5G4 antibody, in dermal nerve fascicles innervating autonomic structures of PD patients. Morphology of alpha-synuclein deposits appears as a dotted signal along the axons of dermal nerves (Figure 2). Indeed, exploiting this protocol in 19 PD patients and 17 controls in skin biopsies at three anatomical site (cervical, thigh and distal leg) we found that 5G4 had 81% of se...

Dyskusje

We describe a free-floating immunofluorescence assay for skin biopsies for the diagnosis of PD: it exploits double immunostaining with anti-PGP9.5 antibody, a panaxonal marker, and anti-5G4, a conformation specific antibody that recognizes the aggregated form of αSyn.

The great advantages of skin biopsy for diagnostic purpose in PD and possibly in other protein conformational disorders are: 1) the direct access to nervous tissue prone to disease by a mildly invasive technique and thus wit...

Materiały

Name	Company	Catalog Number	Comments
5G4 (anti human αSyneclein 5G4)	Analytik Jena Roboscreen	847-0102004001	Mouse monoclonal
AlexaFluor 488 Goat anti Rabbit IgG	Invitrogen	1971418	2 mg/mL
AlexaFluor 594 Goat anti Mouse IgG	Invitrogen	1922849	2 mg/mL
Disodium hydrogen phosphate solution	Merk Millipore	106586
Ethylene Glycol	Sigma-Aldrich	324558
Glycerol	Sigma-Aldrich	G7757
L-Lysine monohydrochloride	Sigma-Aldrich	L5626
Paraformaldehyde	Aldrich Chemistry	441244
PGP9.5	Abcam	ab15503	Rabbit polyclonal
Sodium Chloride	Sigma	S3014
Sodium Dihydrogen Phosphate Monohydrate	Merck Millipore	106346
Sodium (meta)periodate	Sigma-Aldrich	S1878
Trizma Base	Sigma	T1503
Tryton X-100	Sigma-Aldrich	X100
Vectashield	Vector Laboratories	H-1000	Mounting medium