We thank Anne de Jong and Siger Holsappel for help with the DNA microarrays slide production. Anne de Jong&#8217;s support for bioinformatics analysis is also appreciated. We also thank Jelle Slager for reviewing the paper. Muhammad Afzal and Irfan Manzoor are supported by the GC University, Faisalabad, Pakistan under the faculty development program of HEC Pakistan.

1. Preparation of Media, and Cell Culture
<ol>
	<li>Grow S. pneumoniae D39 wild-type strain21 as described previously11. Inoculate cells stored at -80&#160;oC in 10% glycerol (with 1/100 ratio in 50 ml sterile tubes) in 50 ml Chemically Defined Medium (CDM) with a final pH of 6.4 15, but omit L-serine from the amino acid mixture. 
	Note: two different CDMs were used; one containing a minimum concentration of L-serine (150 &#181;M) and the other containing a maximum concentration of L-serine (10 mM). This minimum concentration is basically the concentration of L-serine in human blood plasma and the aim is to compare the gene expression of S. pneumoniae D39 strain under these two conditions.</li>
</ol>
2. Isolation of Total RNA
<ol>
	<li>Materials
	<ol>
		<li>Use acid phenol, RNA grade for the isolation of total RNA.</li>
		<li>Macaloid:
		<ol>
			<li>Suspend 2 grams of macaloid in 100 ml TE and boil for 5 min. Cool to RT and sonicate until macaloid gels.Centrifuge the solution at 2,000 &#215;&#160;g for 5 min&#160;at RT, resuspend in 50 ml TE pH 8 and store at 4 &#176;C.</li>
		</ol>
		</li>
		<li>Solutions:
		<ol>
			<li>Treat all solutions with diethyl pyrocarbonate (DEPC). Add 100 &#181;l DEPC/100 ml solution, incubate O/N at 37 &#176;C and autoclave for 15 min.</li>
		</ol>
		</li>
	</ol>
	</li>
	<li>Methodology
	<ol>
		<li>Grow 50 ml of S. pneumoniae D39 cell culture in 50 ml tubes at 37 oC (no shaking) until mid-exponential phase (OD ~0.3). Centrifuge cultures at 4 &#176;C on 10,000 &#215;&#160;g&#160;for 2 min. Discard media and immediately freeze the cell pellets in liquid nitrogen.</li>
		<li>Premix 300 &#181;l chloroform:IAA (24:1) and 300 &#181;l phenol (acid phenol, RNA grade). Use 500 &#181;l of the organic phase in step 2.2.3.</li>
		<li>Prepare the following mixture in advance in RNA-free screw-cap tubes: 0.5 g glass beads, 50 &#181;l 10% SDS, 500 &#181;l phenol/chloroform:IAA (as prepared in step 2.2.2), macaloid layer (150-175 &#181;l, not exact as it is very viscous). Resuspend the cell pellets in 400 &#181;l TE (DEPC) and add the resuspended cells into the screw-cap tubes.</li>
		<li>To break the cells, place the screw-cap tubes in a bead beater for 2x 60&#8221; pulses (&#8216;homogenize&#8217;) with 1 min&#160;interval on ice. Centrifuge the samples for 10 min&#160;at 10,000 &#215;&#160;g&#160;(4 &#176;C).</li>
		<li>Transfer the upper phase to a fresh tube, add 500 &#181;l chloroform:IAA (24:1) and centrifuge for 5 min at 10,000 &#215;&#160;g (4 &#176;C).</li>
		<li>Transfer 500 &#181;l of the upper phase to fresh tubes, add 2 volumes (1 ml) of lysis/binding buffer and mix by pipetting up and down. Isolate total RNA using the RNA isolation kit and follow the manufacturer recommended protocol.</li>
	</ol>
	</li>
</ol>
3. RNA&#160;Cleanup
<ol>
	<li>To remove the contamination of DNA from total RNA, add 100 &#181;l DNAseI mix (90 &#181;l DNAse buffer and 10&#181;l DNAseI) and incubate for 20-30 min at 15-25 &#186;C.</li>
	<li>Wash cleaned RNA using the RNAse kit. Obtain 50 &#181;l of eluted volume.</li>
</ol>
4. Analysis of RNA
<ol>
	<li>Determine the concentration of RNA on a spectrophotometer. Determine the quality of RNA by using an assay as follows (Figure 2).
	<ol>
		<li>Dilute 1 &#181;l of sample with 50 &#181;l of DEPC water to get a concentration of 20-200 ng/&#181;l.</li>
		<li>Use 1 &#181;l diluted RNA sample to check quality on the Bioanalyser according to the manufacturer&#8217;s instructions.</li>
	</ol>
	</li>
	<li>Note: a ratio of 23S:16S of around 2.0 is considered good.1 A260 unit RNA corresponds to 40 &#181;g/ml. A recommended amount for labeling is 10-20 &#181;g.</li>
</ol>
5. cDNA Preparation and Labelling
NOTE: The following protocol was followed for cDNA preparation and labelling.
<ol>
	<li>Annealing
	<ol>
		<li>Perform annealing reaction in 300 &#181;l PCR tubes, keeping the concentration of total RNA 10-15 &#181;g for homemade slides or 5 &#181;g for company-made slides. Mix RNA with 2 &#181;l Random nonamers (1.6 &#181;g/&#181;l) and add nuclease-free water if necessary to keep the final volume of the annealing mixture to 18 &#181;l.</li>
		<li>Keep the annealing mixture at 70 &#176;C for 5 min. After that, cool down the mixture to RT&#160;for 10 min (annealing) and if needed, spin down the reactions to the bottom of the tube. Place the reaction tubes on ice for at least 1 min.</li>
	</ol>
	</li>
	<li>Reverse Transcription
	<ol>
		<li>Prepare the reverse transcriptase mix as follows: to 18 &#181;l annealing mix, add 12 &#181;l Master mix (consisting of 6 &#181;l 5x First Strand buffer, 3 &#181;l 0.1 M DDT, 1.2 &#181;l 25x AA-dUTP / nucleotide mix and 1.8 &#181;l reverse transcriptase (1 &#181;l for company-made slides). Keep the reaction mix for 2-16 hr at 42 &#176;C.</li>
	</ol>
	</li>
</ol>
6. Degradation of mRNA and Purification of cDNA
<ol>
	<li>To degrade the mRNA from the reaction mixture, add 3 &#181;l of 2.5 M NaOH and place at 37 &#176;C for about 15 min. Subsequently, add 15 &#181;l of 2M HEPES free acid to neutralize the NaOH.</li>
	<li>Purify the cDNA mixture by using PCR clean-up columns and follow the manufacturer&#8217;s protocol.</li>
</ol>
7. Measurement of cDNA Concentration
<ol>
	<li>Measure cDNA concentrations on a spectrophotometer. To continue with labelling, check that the concentration of cDNA is at least 60 ng/&#181;l (homemade slides) or 20 ng/&#181;l (company-made slides).</li>
</ol>
8. Labelling of cDNA with Amine-reactive Dye and Purification
<ol>
	<li>Use amine-reactive dye to label the cDNA. Directly mix the cDNA with one aliquot (5 &#181;l) of amine-reactive dye.</li>
	<li>Incubate the mixture at RT, in the dark, for 60 to 90 min and proceed directly to purification of dye-labelled cDNA. Purify dye-labelled cDNA by using PCR clean-up columns and following the manufacturer&#8217;s protocol. Elute cDNA in 50 &#181;l of elution buffer.</li>
</ol>
9. Measurement of Labelled cDNA
<ol>
	<li>Use a spectrophotometer to measure the incorporation of amine-reactive dyes into the cDNA. Check that the concentration of amine-reactive dyes is at least 0.5 pmol/&#181;l in a total volume of 50 &#181;l.</li>
</ol>
10. Mixing of Labelled cDNA Samples
<ol>
	<li>For homemade slides, use all the labelled cDNA for hybridization with not more than 30% difference in cDNA concentration. For company-made slides, use cDNA with not more than 2-fold difference in cDNA concentration. 
	Note: normally, about 300 ng of cDNA is needed for company-made slides, which is very little as compared to the required amount of cDNA for homemade slides.</li>
</ol>
11. Hybridization and Washing
<ol>
	<li>Use the following reagents: demi water, ethanol 99%, SHY Buffer (homemade; with&#160;40 &#181;l yeast RNA). Prepare maximum 1 ml of SHY.</li>
	<li>Apparatus and solutions preparation
	<ol>
		<li>Switch on vacuum concentrators and heater at least 1 hr before drying. Switch on hybridization oven, with set point adjusted to the correct hybridization temperature (for S. pneumoniae DNA microarrays, use 45 &#176;C). Similarly, preheat hybridization cassette and oven for 30-60 min.</li>
		<li>Preheat SHY buffer at 68 &#730;C for at least 30 min.</li>
	</ol>
	</li>
	<li>Sample preparation (labelled cDNA)
	<ol>
		<li>Combine equal quantities of labelled cDNAs (max 30% difference). Dry the sample using the vacuum concentrators at high temp (approx. 40 min) until the volume is smaller than 7 &#181;l.</li>
	</ol>
	</li>
	<li>Lifter-slip
	<ol>
		<li>Use clean lifter-slips. Note: &#177; 30 &#181;l can be loaded on the slide.</li>
		<li>Clean the lifter-slips with soap, plenty of tap water and 100% ethanol. Note: Dirty lifter slips give high background.</li>
		<li>Air dry the lifter-slips with air pistol to blow away dust particles. Place a clean lifter-slip on the slide with the white teflon lining at the sides facing down.</li>
	</ol>
	</li>
	<li>Adding hybridization buffer (to labelled cDNA)
	<ol>
		<li>Dissolve the dried dye samples in 7 &#181;l H2O and incubate at 94 &#176;C for 2 min.</li>
		<li>Immediately, add 35 &#181;l preheated SHY buffer (68 &#176;C), mix gently and spin at maximum speed for 1 min to get rid of precipitates. Preheat the probe at 68 &#730;C for approximately 5 min until loading.</li>
	</ol>
	</li>
	<li>Slide-lifter-slip assembly and preheating.
	<ol>
		<li>Place the hybridization slide holder on a heat-block at 50 &#730;C. Place DNA microarray slides with the lifter-slip on the heated hybridization slide holder and preheat the slide with lifter-slip for a minute. Perform the next steps as quickly as possible.</li>
		<li>Add 40 &#181;l of the sample target to the end of the slide. Allow the fluid to flow between the glass surfaces by capillary force. Perform all pipetting slowly and carefully.</li>
		<li>Keep the slides with lifter-slip horizontal at all times and move slowly to make sure that the lifter-slip did not move.</li>
		<li>Take the pre-warmed hybridization cassette out of the hybridization oven and close the machine. Place filter-paper soaked with 3 ml 2x SSC (standard saline citrate) in the hybridization cassette.</li>
		<li>Gently place the hybridization slide holder with slides in the hybridization cassette. Close the hybridization cassette and put in the hybridization oven again (for about 16-18 hr).</li>
	</ol>
	</li>
	<li>Slide washing
	<ol>
		<li>Prepare fresh wash-buffers I, II and III (750 ml per wash step). For 500 ml wash-buffer I, use 2 x SSC / 0.5 % SDS. For 500 ml wash-buffer II, use 1 x SSC / 0.25 % SDS. For 500 ml wash-buffer III, use 1 x SSC / 0.1 % SDS (optional)</li>
		<li>Place the wash-buffers at 30 &#176;C (to be sure SDS is dissolved).</li>
		<li>Submerge the slides as quickly as possible, but very gently, in a falcon tube filled with 50 ml wash buffer I until the glass rests on the conical bottom of the tube.</li>
		<li>After a few seconds, when the lifter-slip sinks to the bottom of the tube, take out the slide with tweezers without scratching the array and put in the rack of the wash station. Continue with the washing with no time gap.</li>
		<li>Wash the slides for 5 min in 500 ml wash-buffer I (in a washing station). Give it a second wash for 20-30 min in 500 ml wash-buffer II (in a washing station). Similarly, wash the slides for 5 min in 500 ml wash-buffer III (optional) (in a washing station).</li>
		<li>Dry the slides for 2 min at 2,000 rpm.</li>
	</ol>
	</li>
</ol>
12. Microarray Analysis
<ol>
	<li>Scan images with respective wavelengths in scanner and save in a folder &#8220;Jove Project&#8221;.</li>
	<li>Use software to analyze the scanned files initially as described previously 22. After running this software, select the &#8220;Open Image&#8221; tab to load the red image file (-.550) as &#8220;Red&#8221; and green image file (-.635) as &#8220;Green&#8221;. Upload the gal file (.gal) having S. pneumoniae array list on image file by selecting &#8220;Load Array List&#8221; tab 22. 
	Note: this array list consisted of 48 grids, on each grid there were 16 rows and 15 columns. Each spot on the grid represents a single gene and spot information including gene name is added through a spot description file. The spot numbers are given from left to right and top to bottom.</li>
	<li>After carefully spotting the grids, select tab &#8220;Find Array, Find Blocks, Align Features&#8221; to align the spots. After aligning all the features, analyze the image by selecting the &#8220;Analyzing&#8221; tab. Create a new file having results, histogram and scatter plot. Save this file from tab &#8220;Save results as&#8221; as a .gpr file for further analysis.</li>
	<li>Perform further normalization and processing of data with in-house developed Microprep software package as described9.</li>
	<li>Use independent biological replicates for DNA microarray data which are dye-swapped. Perform CyberT implementation of a variant of t-test1 and calculate false discovery rates (FDRs) as described9.</li>
	<li>For differentially expressed genes, take p &#60; 0.001 and FDR &#60; 0.05 as a standard.</li>
	<li>Upload DNA microarray data on NCBI submission page to get a GEO (Gene Expression Omnibus) accession number.</li>
</ol>

<ol>
	<li>Kayala, M. A., Baldi, P. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Cyber-T+web+server:+differential+analysis+of+high-throughput+data.">Cyber-T web server: differential analysis of high-throughput data.</a> Nucleic Acids Res. 40, W553-W559 (2012).</li><li>Chang, T. W. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Binding+of+cells+to+matrixes+of+distinct+antibodies+coated+on+solid+surface.">Binding of cells to matrixes of distinct antibodies coated on solid surface.</a> J. Immunol. Methods. 65, 217-223 (1983).</li><li>Schena, M., Shalon, D., Davis, R. W., Brown, P. O. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Quantitative+monitoring+of+gene+expression+patterns+with+a+complementary+DNA+microarray.">Quantitative monitoring of gene expression patterns with a complementary DNA microarray.</a> Science. 270, 467-470 (1995).</li><li>Galau Levi, A., A, G., Wetzstein, H. Y. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+rapid+procedure+for+the+isolation+of+RNA+from+high-phenolic-containing+tissues+of+pecan.">A rapid procedure for the isolation of RNA from high-phenolic-containing tissues of pecan.</a> 27 (12), 1316-1318 (1992).</li><li>Lopez-Gomez, R., Gomez-Lim, M. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+method+for+extraction+of+intact+RNA+from+fruits+rich+in+polysaccharides+using+ripe+mango+mesocarp.">A method for extraction of intact RNA from fruits rich in polysaccharides using ripe mango mesocarp.</a> (5), 440-442 (1992).</li><li>Salzman, R. A., Fujita, T., Salzman, Z., Hasegawa, P. M., Bressan, R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+improved+RNA+isolation+method+for+plant+tissues+containing+high+levels+of+phenolic+compounds+or+carbohydrates.">A improved RNA isolation method for plant tissues containing high levels of phenolic compounds or carbohydrates.</a> Plant Molecular Biology Report. 17, 11-17 (1999).</li><li>Kiefer, E., Heller, W., Ernst, D. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+simple+and+efficient+protocol+for+isolation+of+functional+RNA+from+plant+tissues+rich+in+secondary+metabolites.">A simple and efficient protocol for isolation of functional RNA from plant tissues rich in secondary metabolites.</a> Plant Mol. Biol. Report. 18, 33-39 (2000).</li><li>Tattersall, E. A. R., Ergul, A., Alkayal, F., Deluc, L., Cushman, J. C., Cramer, G. R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Comparison+of+methods+for+isolating+high-quality+RNA+from+leaves+of+grapevine.">Comparison of methods for isolating high-quality RNA from leaves of grapevine.</a> Am. J. Enol. Vitic. 56, 400-406 (2005).</li><li>Van Hijum, S. A. F. T., Garcia de la Nava, J., Trelles, O., Kok, J., Kuipers, O. P. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=MicroPreP:+a+cDNA+microarray+data+pre-processing+framework.">MicroPreP: a cDNA microarray data pre-processing framework.</a> Appl.Bioinformatics. 2, 241-244 (2003).</li><li>Kadioglu, A., Weiser, J. N., Paton, J. C., Andrew, P. W. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+role+of+Streptococcus+pneumoniae+virulence+factors+in+host+respiratory+colonization+and+disease.">The role of Streptococcus pneumoniae virulence factors in host respiratory colonization and disease.</a> Nat.Rev.Microbiol. 6, 288-301 (2008).</li><li>Afzal, M., Shafeeq, S., Kuipers, O. P. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=LacR+is+a+repressor+of+lacABCD+and+LacT+is+an+activator+of+lacTFEG,+constituting+the+lac+gene+cluster+in+Streptococcus+pneumoniae.">LacR is a repressor of lacABCD and LacT is an activator of lacTFEG, constituting the lac gene cluster in Streptococcus pneumoniae.</a> Appl. Environ. Microbiol. 80, 5349-5358 (2014).</li><li>Afzal, M., Shafeeq, S., Henriques-Normark, B., Kuipers, O. P. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=UlaR+activates+the+expression+of+the+ula+operon+in+Streptococcus+pneumoniae+in+the+presence+of+ascorbic+acid.">UlaR activates the expression of the ula operon in Streptococcus pneumoniae in the presence of ascorbic acid.</a> Microbiol. Read. Engl. , (2014).</li><li>Hendriksen, W. T., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Site-specific+contributions+of+glutamine-dependent+regulator+GlnR+and+GlnR-regulated+genes+to+virulence+of+Streptococcus+pneumoniae.">Site-specific contributions of glutamine-dependent regulator GlnR and GlnR-regulated genes to virulence of Streptococcus pneumoniae.</a> Infect. Immun. 76, 1230-1238 (2008).</li><li>Kloosterman, T. G., Kuipers, O. P. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Regulation+of+arginine+acquisition+and+virulence+gene+expression+in+the+human+pathogen+Streptococcus+pneumoniae+by+transcription+regulators+ArgR1+and+AhrC.">Regulation of arginine acquisition and virulence gene expression in the human pathogen Streptococcus pneumoniae by transcription regulators ArgR1 and AhrC.</a> J. Biol. Chem. 286, 44594-44605 (2011).</li><li>Kloosterman, T. G., Bijlsma, J. J. E., Kok, J., Kuipers, O. P. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=To+have+neighbour's+fare:+extending+the+molecular+toolbox+for+Streptococcus+pneumoniae.">To have neighbour's fare: extending the molecular toolbox for Streptococcus pneumoniae.</a> Microbiol. Read. Engl. 152, 351-359 (2006).</li><li>Blom, E. J., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=FIVA:+Functional+Information+Viewer+and+Analyzer+extracting+biological+knowledge+from+transcriptome+data+of+prokaryotes.">FIVA: Functional Information Viewer and Analyzer extracting biological knowledge from transcriptome data of prokaryotes.</a> Bioinforma. Oxf. Engl. 23, 1161-1163 (2007).</li><li>Blom, E. J., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Prosecutor:+parameter-free+inference+of+gene+function+for+prokaryotes+using+DNA+microarray+data,+genomic+context+and+multiple+gene+annotation+sources.">Prosecutor: parameter-free inference of gene function for prokaryotes using DNA microarray data, genomic context and multiple gene annotation sources.</a> BMC Genomics. 9, 495 (2008).</li><li>Blom, E. J., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=DISCLOSE+:+DISsection+of+CLusters+Obtained+by+SEries+of+transcriptome+data+using+functional+annotations+and+putative+transcription+factor+binding+sites.">DISCLOSE : DISsection of CLusters Obtained by SEries of transcriptome data using functional annotations and putative transcription factor binding sites.</a> BMC Bioinformatics. 9, 535 (2008).</li><li>Baerends, R. J. S., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Genome2D:+a+visualization+tool+for+the+rapid+analysis+of+bacterial+transcriptome+data.">Genome2D: a visualization tool for the rapid analysis of bacterial transcriptome data.</a> Genome Biol. 5 (5), R37 (2004).</li><li>De Jong, A., Pietersma, H., Cordes, M., Kuipers, O. P., Kok, J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=PePPER,+a+webserver+for+prediction+of+prokaryote+promoter+elements+and+regulons.">PePPER, a webserver for prediction of prokaryote promoter elements and regulons.</a> BMC Genomics. 13, 229 (2012).</li><li>Lanie, J. A., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Genome+sequence+of+Avery's+virulent+serotype+2+strain+D39+of+Streptococcus+pneumoniae+and+comparison+with+that+of+unencapsulated+laboratory+strain+R6.">Genome sequence of Avery's virulent serotype 2 strain D39 of Streptococcus pneumoniae and comparison with that of unencapsulated laboratory strain R6.</a> J. Bacteriol. 189, 38-51 (2007).</li><li>Molecular Devices, Corp. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=.">.</a> GenePix Pro 6.0 Microarray Acquisition and Analysis Software for GenePix Microarray Scanners-Use's Guide and Tutorial. , (2005).</li></ol>

The authors declare that they have no competing financial interests.

We describe a user-friendly protocol that can be applied to perform whole transcriptome analysis of bacteria. The key point about this particular technique is that the condition under which the cells are harvested will vary. After harvesting the cells and RNA isolation, this technique becomes equal for all types of bacterial samples and follows exactly identical steps and therefore, can be applied to any type of bacterial culture. The protocol is very simple and convenient and starts from RNA isolation. Our RNA isolation...

The study of the whole set of mRNA abundance (transcriptome) encoded by the genome of a unicellular organism or a eukaryotic cell at a specific time or under a specific condition, including gene overexpression or knock-out, is called transcriptomics. Transcriptomics allows us to observe to what extent genes are expressed under a particular condition at a time point X and gives us information about how strongly the genes are expressed relative to a reference.
A microarray is a two-dimensional array on a solid substrate (usually a glass slide or silicon thin-film cell) that can be used to assay large quantities of biological material using high-throughput screening, and miniaturized, multiplexed and parallel processing and detection methods. Microarrays come in various types, including DNA-microarrays, protein microarrays, peptide microarrays, tissue microarrays, antibody microarrays, cellular microarrays and others. A DNA microarray is basically an assembly of microscopic DNA spots fixed to a solid surface, usually glass. DNA microarrays are used to measure the expression levels of a gene or a set of genes simultaneously or to genotype multiple regions of a genome2,3. Picomoles (10-12 moles) of a probe are present within each DNA spot that represents a specific DNA sequence, also known as a reporter. The labelled mRNA molecules from the samples are called &#8216;targets&#8217;. Fluorophores are used to measure probe-target hybridization and detection of fluorophore-labelled targets determines the relative abundance of nucleic acid sequences in the target. A microarray experiment can accomplish multiple genetic tests in parallel because an array may contain tens of thousands of probes. The layout of a simple microarray experiment is shown in Figure 1. Recently, it was established in our and other labs that these arrays are reusable, which makes this technique quite cost-effective.
Different RNA isolation and purification techniques have been developed over the years including C-TAB, SDS and GT methods 4&#8211;8. Furthermore, several commercial kits are also available. For gene expression high quality RNA is very important. Therefore, the RNA isolation methods are modified to get a maximum quantity of RNA. Similarly, the steps for cDNA preparation and labelling of cDNA are minimized. Normalization of data after scanning is also performed efficiently by using in-house built software packages and tools9.
Streptococcus pneumoniae is a Gram-positive human pathogen that colonizes the nasopharynx and is the cause of multiple infections such as pneumonia, sepsis, otitis media and meningitis10. The bacterium can utilize a wide variety of the nutrients required for growth and survival 11,12. A number of studies have been carried out on the pneumococcal nitrogen metabolism and regulation emphasizing the importance of amino acids and their role in virulence13,14. In this study, the transcriptomic response of S. pneumoniae to changing concentrations of L-serine, an amino acid abundantly present in the human blood plasma, is reported using DNA microarrays. The transcriptomic response of S. pneumoniae grown in a minimum concentration of L-serine (150 &#181;M) was compared to that grown in a maximum concentration (10 mM) of serine. Chemically defined medium (CDM or minimal medium)15 was used for this study to control the concentration of serine. The focus of this study is to make this technique user-friendly and to provide different tools for data normalization and analysis. Therefore, a number of tools were developed for analysis and data interpretation. FIVA (Functional Information Viewer and Analyzer) provides a platform for processing information contained in clusters of genes having similar gene expression patterns and for constructing functional profiles16. PROSECUTOR is another software package that facilitates the identification of putative functions and annotations of genes 17. By making use of clustering methods, DISCLOSE provides a DNA binding site detection algorithm. Cis-regulatory motifs of genes can be projected by using this algorithm 18. Genome2D offers a Windows-based platform for visualization and analysis of transcriptome data by offering different color ranges to characterize the changes in gene expression levels on a genome map19. The PePPER webserver offers, in addition to the all-in-one analysis method, a toolbox for mining for regulons, promoters and transcription factor binding sites 20. Full annotation of intergenic regions in a bacterial genome can be achieved by using this package. Biologists can greatly benefit from PePPER as it offers them a platform for designing experiments so that the hypothesized information can be confirmed in vitro20. These software packages contribute significantly to the microarray analysis as most of them are freely available and make data normalization and analysis very reliable.

<table border="0" cellpadding="0" cellspacing="0">
	<tbody>
		<tr>
			<td>Acid phenol</td>
			<td>SigmaAldrich</td>
			<td>P4682</td>
			<td></td>
		</tr>
		<tr>
			<td>Roche RNA isolation kit</td>
			<td>Roche Applied Science</td>
			<td>11828665001</td>
			<td></td>
		</tr>
		<tr>
			<td>Glass beads</td>
			<td></td>
			<td>105015</td>
			<td></td>
		</tr>
		<tr>
			<td>Chloroform</td>
			<td>Boom</td>
			<td>92013505.1000.</td>
			<td></td>
		</tr>
		<tr>
			<td>IAA</td>
			<td></td>
			<td>106630</td>
			<td></td>
		</tr>
		<tr>
			<td>Nanodrop</td>
			<td>Nanodrop</td>
			<td>ND-100</td>
			<td></td>
		</tr>
		<tr>
			<td>Agilent BioAnalyser</td>
			<td>Agilent</td>
			<td>G2940CA</td>
			<td></td>
		</tr>
		<tr>
			<td>Superscript III</td>
			<td>Life technologies Invitrogen</td>
			<td>18080044</td>
			<td></td>
		</tr>
		<tr>
			<td>AA-dUTP</td>
			<td>Life technologies Invitrogen</td>
			<td>AM8439</td>
			<td></td>
		</tr>
		<tr>
			<td>DDT</td>
			<td>Life technologies Invitrogen</td>
			<td>18080044</td>
			<td></td>
		</tr>
		<tr>
			<td>First Strand buffer</td>
			<td>Life technologies Invitrogen</td>
			<td>18080044</td>
			<td></td>
		</tr>
		<tr>
			<td>NaOH</td>
			<td>SigmaAldrich</td>
			<td>S8045-1KG</td>
			<td></td>
		</tr>
		<tr>
			<td>HEPES</td>
			<td>SigmaAldrich</td>
			<td>H4034-500G</td>
			<td></td>
		</tr>
		<tr>
			<td>DyLight-550</td>
			<td>Thermoscientiffic</td>
			<td>62262</td>
			<td></td>
		</tr>
		<tr>
			<td>DyLight-650</td>
			<td>Thermoscientiffic</td>
			<td>62265</td>
			<td></td>
		</tr>
		<tr>
			<td>SHY Buffer</td>
			<td>SigmaAldrich</td>
			<td>H7033-125ML</td>
			<td></td>
		</tr>
		<tr>
			<td>Speedvac cooler</td>
			<td>Eppendorf</td>
			<td>RUGNE3140</td>
			<td>Speedvac concentrator plus</td>
		</tr>
		<tr>
			<td>Hybridization oven</td>
			<td>Grant Boekel</td>
			<td>Iso-20</td>
			<td></td>
		</tr>
		<tr>
			<td>Lifter-slips</td>
			<td>Erie Scientific</td>
			<td>25x60I-M-5439</td>
			<td></td>
		</tr>
		<tr>
			<td>Wipe</td>
			<td>KIMTECH</td>
			<td></td>
			<td></td>
		</tr>
		<tr>
			<td>SDS</td>
			<td>SigmaAldrich</td>
			<td>L3771-100g</td>
			<td></td>
		</tr>
		<tr>
			<td>SSC</td>
			<td>SigmaAldrich</td>
			<td>W302600-1KG-K</td>
			<td></td>
		</tr>
		<tr>
			<td>Genpix autoloader 4200A1</td>
			<td>MSD analytical technologies</td>
			<td></td>
			<td>Microarray scanner</td>
		</tr>
		<tr>
			<td>Sodium bicarbonate</td>
			<td>SigmaAldrich</td>
			<td>104766</td>
			<td></td>
		</tr>
	</tbody>
</table>

a fast and reliable pipeline for bacterial transcriptome analysis case study: serine-dependent gene regulation in streptococcus pneumoniae

Gene expression and its regulation are very important to understand the behavior of cells under different conditions. Various techniques are used nowadays to study gene expression, but most are limited in terms of providing an overall picture of the expression of the whole transcriptome. DNA microarrays offer a fast and economic research technology, which gives a full overview of global gene expression and have a vast number of applications including identification of novel genes and transcription factor binding sites, characterization of transcriptional activity of the cells and also help in analyzing thousands of genes (in a single experiment). In the present study, the conditions for bacterial transcriptome analysis from cell harvest to DNA microarray analysis have been optimized. Taking into account the time, costs and accuracy of the experiments, this technology platform proves to be very useful and universally applicabale for studying bacterial transcriptomes. Here, we perform DNA microarray analysis with Streptococcus pneumoniae as a case-study by comparing the transcriptional responses of S. pneumoniae grown in the presence of varying L-serine concentrations in the medium. Total RNA was isolated by using a Macaloid method using an RNA isolation kit and the quality of RNA was checked by using an RNA quality check kit. cDNA was prepared using reverse transcriptase and the cDNA samples were labelled using one of two amine-reactive fluorescent dyes. Homemade DNA microarray slides were used for hybridization of the labelled cDNA samples and microarray data were analyzed by using a cDNA microarray data pre-processing framework (Microprep). Finally, Cyber-T was used to analyze the data generated using Microprep for the identification of statistically significant differentially expressed genes. Furthermore, in-house built software packages (PePPER, FIVA, DISCLOSE, PROSECUTOR, Genome2D) were used to analyze data.

RNA, cDNA isolations and analysis
L-serine is one of the essential amino acids and its concentration in human blood plasma varies from 60-150 &#181;M in children and adults. Its role in the biosynthesis of purines and pyrimidines highlights its importance in metabolism and it is a precursor to several amino acids (glycine, cysteine and tryptophan). To study the impact of L-serine on the whole transcriptome of S. pneumoniae D39 wild-type strain, microarray analysis of ...

Watch this Scientific Journal Video about A Fast and Reliable Pipeline for Bacterial Transcriptome Analysis Case study: Serine-dependent Gene Regulation in Streptococcus pneumoniae at JoVE.com

A Fast and Reliable Pipeline for Bacterial Transcriptome Analysis Case study: Serine-dependent Gene Regulation in Streptococcus pneumoniae

This manuscript describes the use of state-of-the-art technology provided by DNA-microarrays. Microarrays provide an overview of the transcriptomic changes in bacteria incurred under a specific condition. Moreover, we highlight the ease by which large amounts of data can be analyzed by using convenient in-house developed software packages.

A Fast and Reliable Pipeline for Bacterial Transcriptome Analysis Case study: Serine-dependent Gene Regulation in Streptococcus pneumoniae

Gene expression and its regulation are very important to understand the behavior of cells under different conditions. Various techniques are used nowadays ...

a-fast-reliable-pipeline-for-bacterial-transcriptome-analysis-case

Research

JoVE Journal

Biology

10.3K Views.  University of Groningen. This manuscript describes the use of state-of-the-art technology provided by DNA-microarrays. Microarrays provide an overview of the transcriptomic changes in bacteria incurred under a specific condition. Moreover, we highlight the ease by which large amounts of data can be analyzed by using convenient in-house developed software packages. 