The study was made possible by funding from the European and Developing Countries Clinical Trials Partnership (EDCTP) &#8211; Pan African Biomarker Expansion program (PanBIOME) grant SP.2011.41304.008. Support was also obtained the University of St Andrews School of Medicine research grant. The publication of this manuscript and TB-MBLA protocol as a visual resource has been made possible by the funding from Scottish Funding Council and Global Challenges Research Fund to the University of St Andrews. Thanks to the Maputo Maternal hospital and Mavalane Health Centre which provided the clinical sputum specimens, and the Maputo Tuberculosis Treatment Unit team who helped with the heat inactivation experiments of clinical sputum specimens.

1. Sample Preparation
<ol>
	<li>Culture
	<ol>
		<li>Working on a clean bench or class 1 cabin, harvest 1 mL aliquots of exponential phase Bacillus Calmette-Gu&#233;rin (BCG) culture into 15 mL plastic centrifuge tubes. Tightly close the tubes. 
		NOTE: To process a whole 5 mL sample, five 15 mL centrifuge tubes are required. 
		CAUTION: A biosafety cabinet is required when working with any TB culture.</li>
	</ol>
	</li>
	<li>Patient sputum specimen
	<ol>
		<li>Working in a well-ventilated space and wearing a nasal mask, carefully open the specimen cup, pipette 1 mL aliquots into 15 mL plastic centrifuge tubes and tightly close the tubes. 
		NOTE: A wide mouth tip is recommended to pipette sputum. Using a pair of scissors, clip off the fine part of the 1 mL tip mouth to create a wider mouth.</li>
	</ol>
	</li>
</ol>
2. Heat Inactivation
<ol>
	<li>Prior to sample preparation, set the water bath to 95 &#176;C. 
	NOTE: The 95 &#176;C temperature increases the chance of reducing RNase activity and thus preserve more RNA for downstream TB-MBLA.</li>
	<li>Transfer the sample tubes to a holding rack immersed in the water bath. Ensure that three-fourths of each sample tube is immersed in the water.</li>
	<li>Boil at 95 &#176;C for 20 min, then transfer the tubes to the bench to cool at room temperature for 5 min before starting the RNA extraction. 
	NOTE: Complete heat inactivation of M. tuberculosis bacilli and BCG was verified by incubating heat inactivated samples and controls at 37 &#176;C for 42 days to verify growth. An optical density measurement at 600 nm (OD600) was taken at baseline and then weekly for the 42 day incubation period.</li>
</ol>
3. RNA Extraction
NOTE: The RNA extraction process described here is for the RNA kit listed in the Table of Materials. Other suitable RNA extraction kits by different manufacturers can be used.
<ol>
	<li>Extraction control (EC) addition
	<ol>
		<li>Transfer 1 mL aliquots of the heat inactivated samples to 1.5 mL tubes. Spike 100 &#181;L of the EC into each sample, close the tube, and mix by inverting the tube upside down 3x. 
		NOTE: The EC is supplied with the TB-MBLA vital bacteria kit (Table of Materials).</li>
	</ol>
	</li>
	<li>Cell sedimentation
	<ol>
		<li>Using a benchtop microcentrifuge, centrifuge the tubes at 20,000 x g for 10 min at room temperature. Pipette off the supernatant, leaving 50 &#181;L of sediment.</li>
		<li>Suspend the sediment in 950 &#181;L of lysis buffer by pipetting up and down, and transfer the whole suspension into the lysing matrix tube supplied with the RNA extraction kit (Table of Materials). Ensure the tubes are tightly closed and label both the lid and the side of the tube.</li>
	</ol>
	</li>
	<li>For cell lysis, transfer the tubes from step 3.2.2 to a homogenizer. Homogenize the samples for 40 s at 6,000 rpm.</li>
	<li>Nucleic acid purification
	<ol>
		<li>Centrifuge the lysate from step 3.3 at 12,000 x g for 5 min at room temperature.</li>
		<li>Prepare fresh 1 mL tubes and add 300 &#181;L of chloroform into each tube.</li>
		<li>Using a 1 mL tip carefully pipette off the supernatant without touching the lysing matrix.</li>
		<li>Transfer the supernatant to the chloroform containing tubes and vortex for 5 s. Leave the tube to settle for 5 min or longer until three phases (upper, middle, and bottom) are clearly visible.</li>
		<li>Centrifuge at 12,000 x g for 5 min at room temperature. Carefully pipette the upper phase and transfer into fresh 1.5 mL tubes.</li>
		<li>To the tubes in step 3.4.5, add 500 &#181;L of ice-cold 100% ethanol, close the tubes, and mix by gently inverting upside down 3x. Incubate the tubes at -80 &#176;C for 15 min or -20 &#176;C for 30 min and continue the extraction, or leave at -20 &#176;C overnight to complete the extraction the following day.</li>
		<li>Set the microcentrifuge to 4 &#176;C and leave to chill to at least 12 &#176;C before commencing centrifugation. Load the tubes into the microcentrifuge and centrifuge for 20 min at 13,000 x g. Discard the supernatant, replace with 70% ice-cold ethanol, and centrifuge for another 10 min at 13,000 x g. 
		NOTE: The 70% ethanol should be made with molecular grade nuclease free water.</li>
		<li>Discard all the supernatant from step 3.4.7 and transfer the tubes to an incubator set at 50 &#176;C. Incubate for 20 min to dry the RNA/DNA pellet. Keep the tubes partially open to enable evaporation of all ethanol.</li>
		<li>Add 100 &#181;L of nuclease free water to the dry pellet and incubate for 5 min at room temperature. Vortex for 3 s to mix the contents. 
		NOTE: At this stage the extract may be stored 2&#8722;3 days in the fridge or longer at -80 &#176;C until section 3.5 is performed.</li>
	</ol>
	</li>
	<li>DNA removal 
	NOTE: This step is crucial because the presence of DNA in the extract invalidates the MBLA result. This section is based on a DNA removal kit (Table of Materials).
	<ol>
		<li>Prepare a mix of the enzyme DNase I 10x buffer and DNase I enzyme for the number of samples (10 &#181;L of buffer and 1 &#181;L of DNase per sample) plus 10% extra to cover any loss from pipetting. Mix by vortexing and then pipette 11 &#181;L into each tube containing the RNA extract.</li>
		<li>Mix by vortexing 3 s and then spin briefly (10 s at 13,000 x g) to remove any droplets on the walls. Incubate at 37 &#176;C for 30 min in the hot block or incubator. Add an additional 1 &#956;L of DNase I enzyme directly into each tube, mix well by vortexing, and incubate for a further 30 min at 37 &#176;C.</li>
		<li>Thaw the DNase inactivation reagent 10 min prior to the end of the DNase incubation. Vortex 20 s to ensure a homogenous, milky suspension and then add 10 &#956;L of DNase inactivation reagent into each RNA extract from step 3.5.2.</li>
		<li>Incubate the mixture at room temperature for 5 min. Vortex 3x during the 5 min incubation step.</li>
		<li>Centrifuge the mixture at 13,000 x g for 2 min. Carefully transfer the supernatant to 1.5 mL RNase free tubes without touching any of the inactivation matrix.</li>
		<li>Store the RNA extract in the fridge if running the RT-qPCR on the same day or at -80 &#176;C for long-term storage.</li>
	</ol>
	</li>
</ol>
4. Reverse Transcriptase qPCR
<ol>
	<li>For unknown samples, dilute all RNA extracts to be used in a 1:10 ratio in RNase free water. Mix well by vortexing for 5 s and briefly spin down to remove any droplets or air bubbles.</li>
	<li>For standard samples for a standard curve, take the Mtb and EC RNA standards from the -80 &#176;C freezer and thaw at room temperature. Make seven and six 10-fold dilutions of Mtb and EC standard samples respectively. Change the tips before transferring the mixture from one tube to another. 
	NOTE: Standard samples are supplied with the TB-MBLA kit.</li>
	<li>Master mix preparation 
	NOTE: Master mix (MM) is a solution of PCR reagents sufficient to amplify all samples, standards, and water for a no template control (NTC). The water used as NTC should be the same water used in the extraction and for preparing the MM. Ensure that the standards, each RNA sample, and its decimal dilution are amplified 2x for the reverse transcriptase positive (RT+) reaction and 1x for the reverse transcriptase negative (RT-) reaction. The RT- reaction is a control to determine the efficiency of DNA removal (Table 1).
	<ol>
		<li>Transfer 16 &#181;L of MM into each PCR reaction tube.</li>
		<li>Add 4 &#181;L of RNA extract into each RT+ and RT- reaction tube and water into the NTC reaction tubes.</li>
		<li>Load the reaction tubes into a real time PCR machine and set the PCR conditions as follows: 50 &#176;C for 30 min, 95 &#176;C for 15 min, 40x cycles at 94 &#176;C for 45 s, and 60 &#176;C for 1 min with acquisition with fluorophores that absorb in green and yellow channels. 
		NOTE: The green channel is the Mtb detection fluorophore and the yellow is the extraction control detection fluorophore.</li>
	</ol>
	</li>
	<li>Result interpretation 
	NOTE: Ensure that the duplicate reactions of the same sample do not differ by more than 1 standard deviation. Mtb and EC Cq values higher than 30 are considered negative. See further interpretation details in Table 2.
	<ol>
		<li>To interpret the treatment response, convert the Cq values into bacterial load (eCFU/mL) using the standard curve. Read the treatment response as the change in bacterial load over the treatment follow-up period. 
		NOTE: The fall in bacterial load following treatment signifies a positive response (i.e., anti-TB drugs killing the TB bacteria) while no change or rise in bacterial load implies a negative response, which may mean resistance of TB bacteria to anti-TB drugs or the patient not appropriately adhering to their treatment dose. The fall in bacterial load measured by TB-MBLA correlates with the increase in MGIT time to culture positivity (TTP).</li>
	</ol>
	</li>
</ol>
5. Transmission Electron Microscopy
<ol>
	<li>Transfer 2 mL aliquots of heat inactivated cultures and controls into 2 mL microcentrifuge tubes. Centrifuge for 10 min at 20,000 x g.</li>
	<li>Discard the supernatant and suspend the pellet in 700 &#181;L of cell fixation buffer and incubate at room temperature for 5 min to fix the cells.</li>
	<li>Centrifuge the suspension for 30 min at 16,000 x g to obtain a hard pellet. Discard the supernatant and replace with 1% sucrose in phosphate-buffered saline (PBS). Store the pellets in sucrose at 4 &#176;C until sectioning for electron microscopy.</li>
	<li>Sectioning and TEM 
	NOTE: The protocol below is adapted from Griffiths et al.28.
	<ol>
		<li>Cryoprotect the cell pellet by embedding it in 2.1 M sucrose in PBS overnight at 4 &#176;C. Wash 3x with ice-cold water.</li>
		<li>Cool the cryoprotected cell pellets in liquid nitrogen and mount them cryomicrotomy stubs. Using the cryomicrotome, cut ultrathin sections at 90 nm.</li>
		<li>Retrieve the cut sections using the tungsten wire loops of 1:1 mixture of 2% methyl cellulose and 2.1 M sucrose in PBS.</li>
		<li>Transfer the sections to pioloform coated 150 mesh hexagonal copper TEM supports (grids) and store at 4 &#176;C or proceed to step 5.4.5.</li>
		<li>Contrast the grids in uranyl acetate and air-dry in a film of methyl acetate. Wash the grids with ice-cold water followed by two drops of PBS over 5 min and dry for 15&#8722;30 min. Examine the sections under TEM following the manufacturer&#8217;s guidelines. 
		NOTE: All labelling steps were performed at ice temperature (liquid temperature) except for the washing steps, which were performed at ambient temperature.</li>
	</ol>
	</li>
</ol>

<ol>
	<li>World Health Organization. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=END+TB+Global+Tuberculosis+Report+2017.">END TB Global Tuberculosis Report 2017.</a> World Health Organization. , (2017).</li><li>World Health Organization. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Global+tuberculosis+report+2018.">Global tuberculosis report 2018.</a> World Health Organization. , (2018).</li><li>World Health Organization. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=TB+Elimination+in+Low-Incidence+Countries.">TB Elimination in Low-Incidence Countries.</a> World Health Organization. , (2014).</li><li>Boehme, C. C., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=diagnostic+accuracy,+and+effectiveness+of+decentralised+use+of+the+Xpert+MTB/RIF+test+for+diagnosis+of+tuberculosis+and+multidrug+resistance:+a+multicentre+implementation+study.">diagnostic accuracy, and effectiveness of decentralised use of the Xpert MTB/RIF test for diagnosis of tuberculosis and multidrug resistance: a multicentre implementation study.</a> The Lancet. 377, 1495-1505 (2011).</li><li>World Health Organization. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Xpert+MTB/RIF+assay+for+the+diagnosis+of+pulmonary+and+extrapulmonary+TB+in+adults+and+children.">Xpert MTB/RIF assay for the diagnosis of pulmonary and extrapulmonary TB in adults and children.</a> World Health Organization. , (2010).</li><li>Friedrich, S. O., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Assessment+of+the+sensitivity+and+specificity+of+Xpert+MTB/RIF+assay+as+an+early+sputum+biomarker+of+response+to+tuberculosis+treatment.">Assessment of the sensitivity and specificity of Xpert MTB/RIF assay as an early sputum biomarker of response to tuberculosis treatment.</a> The Lancet Respiratory Medicine. 1, 462-470 (2013).</li><li>Desjardin, L. E., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Measurement+of+Sputum+Mycobacterium+tuberculosis+Messenger+RNA+as+a+Surrogate+for+Response+to+Chemotherapy.">Measurement of Sputum Mycobacterium tuberculosis Messenger RNA as a Surrogate for Response to Chemotherapy.</a> American Journal of Respiratory Critical Care Medicine. 160, 203-210 (1999).</li><li>Hellyer, T. J., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Detection+of+Viable+Mycobacterium+tuberculosis+by+Reverse+Transcriptase-Strand+Displacement+Amplification+of+mRNA.">Detection of Viable Mycobacterium tuberculosis by Reverse Transcriptase-Strand Displacement Amplification of mRNA.</a> Journal of Clinical Microbiology. 37, 518-523 (1999).</li><li>Honeyborne, I., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Molecular+Bacterial+Load+Assay+,+a+Culture-Free+Biomarker+for+Rapid+and+Accurate+Quantification+of+Sputum+Mycobacterium+tuberculosis+Bacillary+Load+during+Treatment.">Molecular Bacterial Load Assay , a Culture-Free Biomarker for Rapid and Accurate Quantification of Sputum Mycobacterium tuberculosis Bacillary Load during Treatment.</a> Journal of Clinical Microbiology. 49, 3905-3911 (2011).</li><li>Li, L., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Sputum+Mycobacterium+tuberculosis+mRNA+as+a+Marker+of+Bacteriologic+Clearance+in+Response+to+Antituberculosis+Therapy.">Sputum Mycobacterium tuberculosis mRNA as a Marker of Bacteriologic Clearance in Response to Antituberculosis Therapy.</a> Journal of Clinical Microbiology. 48, 46-51 (2010).</li><li>Honeyborne, I., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+Molecular+Bacterial+Load+Assay+Replaces+Solid+Culture+for+Measuring+Early+Bactericidal+Response+to+Antituberculosis+Treatment.">The Molecular Bacterial Load Assay Replaces Solid Culture for Measuring Early Bactericidal Response to Antituberculosis Treatment.</a> Journal of Clinical Microbiology. 52, 3064-3067 (2014).</li><li>Hellyer, T. J., Jardin, L. E. D. E. S., Hehman, G. L., Cave, M. D. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Quantitative+Analysis+of+mRNA+as+a+Marker+for+Viability+of+Mycobacterium+tuberculosis.">Quantitative Analysis of mRNA as a Marker for Viability of Mycobacterium tuberculosis.</a> Journal of Clinical Microbiology. 37, 290-295 (1999).</li><li>Aellen, S., Que, Y., Guignard, B., Haenni, M., Moreillon, P. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Detection+of+Live+and+Antibiotic-Killed+Bacteria+by+Quantitative+Real-Time+PCR+of+Specific+Fragments+of+rRNA.">Detection of Live and Antibiotic-Killed Bacteria by Quantitative Real-Time PCR of Specific Fragments of rRNA.</a> Antimicrobial agents chemotherapy. 50, 1913-1920 (2006).</li><li>Deutscher, M. P. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Degradation+of+RNA+in+bacteria:+Comparison+of+mRNA+and+stable+RNA.">Degradation of RNA in bacteria: Comparison of mRNA and stable RNA.</a> Nucleic Acids Research. 34, 659-666 (2006).</li><li>Gupta, R. K., Srivastava, R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Resuscitation+Promoting+Factors:+A+Family+of+Microbial+Proteins+in+Survival+and+Resuscitation+of+Dormant+Mycobacteria.">Resuscitation Promoting Factors: A Family of Microbial Proteins in Survival and Resuscitation of Dormant Mycobacteria.</a> Indian Journal of Microbiology. 52, 114-121 (2012).</li><li>Mukamolova, G. V., Turapov, O., Malkin, J., Woltmann, G., Barer, M. R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Resuscitation-promoting+factors+reveal+an+occult+population+of+tubercle+bacilli+in+sputum.">Resuscitation-promoting factors reveal an occult population of tubercle bacilli in sputum.</a> American Journal of Respiratory Critical Care Medicine. 181, 174-180 (2010).</li><li>Sheridan, G. E. C., Masters, C. I., Shallcross, J. A., Mackey, B. M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Detection+of+mRNA+by+Reverse+Transcription-PCR+as+an+Indicator+of+Viability+in+Escherichia+coliCells+Detection+of+mRNA+by+Reverse+Transcription-PCR+as+an+Indicator+of+Viability+in+Escherichia+coli+Cells.">Detection of mRNA by Reverse Transcription-PCR as an Indicator of Viability in Escherichia coliCells Detection of mRNA by Reverse Transcription-PCR as an Indicator of Viability in Escherichia coli Cells.</a> Applied Environment Microbiology. 64, 1313-1318 (1998).</li><li>Honeyborne, I., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Molecular+bacterial+load+assay,+a+culture-free+biomarker+for+rapid+and+accurate+quantification+of+sputum+Mycobacterium+tuberculosis+bacillary+load+during+treatment.">Molecular bacterial load assay, a culture-free biomarker for rapid and accurate quantification of sputum Mycobacterium tuberculosis bacillary load during treatment.</a> Journal of Clinical Microbiology. 49, 3905-3911 (2011).</li><li>Sabiiti, W., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Molecular+Bacterial+Load+Assay:+a+Fast+and+Accurate+Means+for+Monitoring+Tuberculosis+Treatment+Response.">Molecular Bacterial Load Assay: a Fast and Accurate Means for Monitoring Tuberculosis Treatment Response.</a> BMJ Global Health. 2, 1-8 (2017).</li><li>Gillespie, H., Stephen, S. W., Oravcova, K., Bishop, A. K. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Mybacterial+Load+Assay.">Mybacterial Load Assay.</a> Diagnostic Bacteriology. Methods and Protocols. , 89-105 (2017).</li><li>Juffs, H., Deeth, H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Scientific+Evaluation+of+Pasteurisation+for+Pathogen+Reduction+in+Milk+and+Milk+Products.">Scientific Evaluation of Pasteurisation for Pathogen Reduction in Milk and Milk Products.</a> Food Standards Australia New Zealand. , (2007).</li><li>Holmes, C. J., Degremont, A., Kubey, W. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Effectiveness+of+Various+Chemical+Disinfectants+versus+Cleaning+Combined+with+Heat+Disinfection+on+Pseudomonas+Biofi+lm.">Effectiveness of Various Chemical Disinfectants versus Cleaning Combined with Heat Disinfection on Pseudomonas Biofi lm.</a> Blood Purification. 22, 461-468 (2004).</li><li>Chedore, P., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Method+for+inactivating+and+fixing+unstained+smear+preparations+of+Mycobacterium+tuberculosis+for+improved+laboratory+safety.">Method for inactivating and fixing unstained smear preparations of Mycobacterium tuberculosis for improved laboratory safety.</a> Journal of Clinical Microbiology. 40, 4077-4080 (2002).</li><li>Cardoso, C. L., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Survival+of+Tubercle+Bacilli+in+Heat-fixed+and+Stained+Sputum+Smears.">Survival of Tubercle Bacilli in Heat-fixed and Stained Sputum Smears.</a> Mem&#243;rias do Instituto Oswaldo Cruz. 96, 277-280 (2001).</li><li>Doig, C., Seagar, A. L., Watt, B., Forbes, K. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+efficacy+of+the+heat+killing+of+Mycobacterium+tuberculosis.">The efficacy of the heat killing of Mycobacterium tuberculosis.</a> Journal of Clinical Pathology. 55, 778-779 (2002).</li><li>Honeyborne, I., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+molecular+bacterial+load+assay+replaces+solid+culture+for+measuring+early+bactericidal+response+to+antituberculosis+treatment.">The molecular bacterial load assay replaces solid culture for measuring early bactericidal response to antituberculosis treatment.</a> Journal of Clinical Microbiology. 52, 3064-3067 (2014).</li><li>Sabiiti, W., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Heat+Inactivation+Renders+Sputum+Safe+and+Preserves+Mycobacterium+tuberculosis+RNA+for+Downstream+Molecular+tests.">Heat Inactivation Renders Sputum Safe and Preserves Mycobacterium tuberculosis RNA for Downstream Molecular tests.</a> Journal of Clinical Microbiology. , 1-8 (2019).</li><li>Griffiths, G., McDowall, A., Back, R., Dubochet, J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=On+the+preparation+of+cryosections+for+immunocytochemistry.">On the preparation of cryosections for immunocytochemistry.</a> Journal of Ultrasructure Research. 89, 65-78 (1984).</li><li>Kumar, V. G., Urs, T. A., Ranganath, R. R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=MPT+64+Antigen+detection+for+Rapid+confirmation+of+M.+tuberculosis+isolates.">MPT 64 Antigen detection for Rapid confirmation of M. tuberculosis isolates.</a> BMC Research Notes. 4, 79 (2011).</li><li>Zwadyk, P., Down, J. A., Myers, N., Dey, M. S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Rendering+of+mycobacteria+safe+for+molecular+diagnostic+studies+and+development+of+a+lysis+method+for+strand+displacement+amplification+and+PCR.">Rendering of mycobacteria safe for molecular diagnostic studies and development of a lysis method for strand displacement amplification and PCR.</a> Journal of Clinical Microbiology. 32, 2140-2146 (1994).</li><li>Blackwood, K. S., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Viability+testing+of+material+derived+from+Mycobacterium+tuberculosis+prior+to+removal+from+a+Containment+Level-III+Laboratory+as+part+of+a+Laboratory+Risk+Assessment+Program.">Viability testing of material derived from Mycobacterium tuberculosis prior to removal from a Containment Level-III Laboratory as part of a Laboratory Risk Assessment Program.</a> BMC Infectious Diseases. 5, 3-9 (2005).</li><li>Somerville, W., Thibert, L., Schwartzman, K., Behr, M. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Extraction+of+Mycobacterium+tuberculosis+DNA:+a+Question+of+Contaiment.">Extraction of Mycobacterium tuberculosis DNA: a Question of Contaiment.</a> Journal of Clinical Microbiology. 43, 2996-2997 (2005).</li><li>Bemer-Melchior, P., Drugeon, H. B. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Inactivation+of+Mycobacterium+tuberculosis+for+DNA+typing+analysis.">Inactivation of Mycobacterium tuberculosis for DNA typing analysis.</a> Journal of Clinical Microbiology. 37, 2350-2351 (1999).</li><li>McKillip, J. L., Jaykus, L. A., Drake, M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=rRNA+stability+in+heat+killed+and+UV-irradiated+enterotoxigenic+Staphylococcus+aureus+and+Escherichia+coli+O157:H7.">rRNA stability in heat killed and UV-irradiated enterotoxigenic Staphylococcus aureus and Escherichia coli O157:H7.</a> Journal of Appied Environmental Microbiology. 64, 4264-4268 (1998).</li><li>Blank, A., Dekker, C. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Ribonucleases+of+Human+Serum,+Urine,+Cerebrospinal+Fluid,+and+Leukocytes.+Activity+Staining+following+Electrophoresis+in+Sodium+Dodecyl+Sulfate-Polyacrylamide+Gels.">Ribonucleases of Human Serum, Urine, Cerebrospinal Fluid, and Leukocytes. Activity Staining following Electrophoresis in Sodium Dodecyl Sulfate-Polyacrylamide Gels.</a> Biochemistry. 20, 2261-2267 (1981).</li><li>O'Leary, T. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Reducing+the+impact+of+endogenous+ribonucleases+on+reverse+transcription-PCR+assay+systems.">Reducing the impact of endogenous ribonucleases on reverse transcription-PCR assay systems.</a> Clinical Chemistry. 45, 449-450 (1999).</li><li>Yamada, H., Yamaguchi, M., Chikamatsu, K., Aono, A., Mitarai, S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Structome+analysis+of+virulent+Mycobacterium+tuberculosis,+which+survives+with+only+700+ribosomes+per+0.1+fl+of+cytoplasm.">Structome analysis of virulent Mycobacterium tuberculosis, which survives with only 700 ribosomes per 0.1 fl of cytoplasm.</a> PLoS One. 10, 1-14 (2015).</li><li>Yang, K., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Structural+insights+into+species-specific+features+of+the+ribosome+from+the+human+pathogen+Mycobacterium+tuberculosis.">Structural insights into species-specific features of the ribosome from the human pathogen Mycobacterium tuberculosis.</a> Nucleic Acids Research. 45, 10884-10894 (2017).</li></ol>

The authors have nothing to disclose.

This article shows that heat treatment for 20 min at 80 &#176;C, 85 &#176;C, and 95 &#176;C inactivates tuberculosis specimens effectively, making it possible for TB-MBLA to be performed in a non-CL3 facility without risk of infection to laboratory workers. The findings confirm observations made in previous studies while contrasting with some on the effectiveness of heat inactivation of Mtb25,30. For instance, some reports indicate that heating at 80 &#176;C is not effective on high bacillary load samples25,31,32,33. The high-density inoculum effect was avoided in our study by ensuring that all sputum and pure cultures were heated at a 1 mL volume per 15 mL centrifuge tube providing adequate space to expose every part of the sample to boiling27.
RNA preservation following heat inactivation makes it possible for TB-MBLA to be performed. This finding concurs with two studies that demonstrated RNA preservation after heat inactivation12,34. We showed that the RNA in heat inactivated samples is stable at 37 &#176;C for 4 days, implying that laboratories could batch tests by maintaining inactivated samples at room temperature for a week. By applying RNA extraction kits that require refrigeration or freezing, the ability to maintain heat inactivated samples at room temperature obviates the need for both cold chain and Category 3 laboratories to perform TB-MBLA in resource limited settings.
Less than 1log bacterial load was lost using the 16S rRNA as a marker. Although there was a difference between live and heat inactivated sample, the amount lost to heat inactivation is too small to compromise downstream results. Increasing temperature did not increase the amount of RNA lost, implying that the observed loss is independent of the heat treatment. Heat treatment at high temperatures most likely causes cell lysis, exposing RNA to degradation by RNases. Indeed, exogenous addition of RNase A to the heat inactivated fraction increased the rate of RNA degradation. Boiling did not reduce the activity of RNase, implying that it is a very resilient protein.
It is important to note that an average RNA degradation of 1.5 log10&#160;eCFU/mL is not a large loss. To this end we hypothesize that heating lyses a small proportion of Mtb bacilli, thus exposing a small amount of RNA to RNase. Using TEM we showed that Mtb cell morphology and integrity of the cell walls is hardly affected by heating at 95 &#176;C. This means that it may require various physiological factors and sufficient supply of RNases such as in the host to significantly degrade RNA35,36. Furthermore, being a structural ribosome, 16S rRNA is potentially less susceptible to RNase37,38. A single Mtb cell contains ~700 ribosomes/0.1 mm3 of cytoplasm37, implying that there are higher quantities of rRNA per cell. Thus, smaller quantities of RNase may have a smaller impact38. The existence of high numbers of ribosomes gives an advantage to TB-MBLA in terms of sensitivity and ability to detect low burden TB patients.
There was a strong correlation between bacterial load measured by TB-MBLA and MGIT culture TTP. This confirms bacterial load as the driver of culture positivity to some extent. However, the advantage of TB-MBLA is that it directly quantifies bacillary load present in the sample and does not require Mtb cell proliferation before detection. This contrasts with culture whose time to positivity depends on the level of bacterial load and rate of Mtb cell proliferation. Future studies will evaluate the TB-MBLA workflow, including heat inactivation, in routine clinical settings. The study will also explore samples with a range of bacterial loads to understand the number that might change from positive to negative (i.e., those with fewer bacteria following heat inactivation).
The TB-MBLA protocol for molecular quantification of bacterial load is the first of its kind in bacteriology. The method directly quantifies Mtb bacillary load from patient sputum and requires no culture to do so. This makes it faster and increases its potential to inform a clinical decision about patient progress. The heat inactivation step reduces the risk of infection and increases applicability of TB-MBLA in settings that do not have a category 3 laboratory. Following heat inactivation of the sample, there are three protocol steps to achieve TB-MBLA results: RNA extraction, reverse transcriptase (RT)-qPCR, and qPCR results analysis.
The higher the efficiency of isolating Mtb RNA from a patient sample, the higher the quality of the results. It is important to note that the quality of the sputum sample affects the amount of RNA isolated. For instance, salivary sputum is considered low quality and has been associated with low bacillary load. This means that training the patient for quality sputum expectoration is important. To assess the efficiency of the extraction process, an extraction control (i.e, the known number of non-Mtb cells) is spiked into the sample prior to RNA extraction. Retrieval of the extraction control confirms the efficiency of the RNA extraction process. The RNA isolation process cannot be valid unless the extraction control has been retrieved. Given the fact that Mtb is a resilient organism makes mechanical lysis a crucial part of the process. Homogenization of the sample at high speed (600 rpm) in the presence of beads (i.e., lysing matrix) effectively lyses the cells. Purification of the lysate yields an extract containing both RNA and DNA. Removal of DNA is a crucial last step of the RNA extraction. TB-MBLA aims to measure viable bacilli by quantifying RNA. Thus, failure to remove genomic DNA means that the results will have a signal from the DNA, which is not a good marker for cell viability6.
The RT-qPCR is a duplex running dual labelled probes for Mtb and extraction control. It involves three steps: 30 min reverse transcription by reverse transcriptase at 50 &#176;C, 15 min denaturation at 95 &#176;C, and 40 cycles of amplification at 94 &#176;C and 60 &#176;C. Acquisition of fluorescence from the probes occurs at 60 &#176;C (i.e., the fragment elongation stage). It is important to note that the TB-MBLA has been optimized using a particular qPCR machine, so operators using other qPCR platforms should optimize the conditions for their equipment. The efficiency of DNA removal is controlled for by running a single reaction per sample in the absence of RT. A positive result from this reaction signifies incomplete removal of DNA. High burden samples that have high amounts of DNA may require double the amount of DNase enzyme to completely remove DNA. Fortunately, in high bacillary load samples, the presence of small amounts of DNA is less likely to affect the result from the RNA. Ribosomal RNA, the TB-MBLA target, naturally occurs in twice the amount of DNA37. In the PCR, a no template control (NTC), which is the water used to dissolve the PCR reagents, controls for cross contamination with exogenous DNA or RNA. A positive signal in the NTC implies cross contamination and the result considered invalid. This means all solutions constituted using this water have to be discarded and new ones made using a fresh vial of water. It is advisable to keep PCR water in separate aliquots to avoid contamination of all the water. A positive control (Mtb RNA) is used to control for the overall efficiency of PCR.
Result analysis involves the conversion of PCR Cqs into bacterial load (i.e., the estimated colony forming units per mL) using the standard curve. Setting and optimising the standard curve is crucial for this step. A standard curve efficiency of 0.95&#8211;1 is recommended. Standard curves for MTb and extraction control should be set up and optimized before patients or other test samples are run on the machine. Standard samples are provided with the TB-MBLA kit. A ten-fold dilution of the RNA extract is recommended for PCR. This implies that the bacterial load result has to be multiplied by a factor of 10 to obtain the final bacterial load result per mL. It is important to note that Cqs above 30 are considered negative for TB-MBLA. A minimum of two prospective bacterial load results measured at different time points is required to make an inference on treatment response. It is strongly recommended that one of the two results should be baseline, before initiation of treatment. However, if the patient initiated bacterial load assessment occurs midway through treatment, there must be a second time point bacterial load measurement to evaluate the treatment response. TB-MBLA can distinguish bacterial load in a space of 3 days on treatment but the ideal is two bacterial load measurements taken 7 days apart.
While the protocol generates informative quantitative results for treatment response, it is still largely manual and demands substantial hands on time for RNA extraction. Technicians in busy labs may not have this time. Arrangements are underway to automate the RNA extraction and PCR processes.

Caused by Mycobacterium tuberculosis (Mtb), over 7 x 106 new cases of tuberculosis (TB) are reported globally of which over 1 x 106 die per year1,2. To reverse the trend, the World Health Organization (WHO) launched a three-pillar approach including developing effective diagnostic and treatment tools3. Classified as a dangerous biological substance B by the UN, working with samples presumed positive for Mtb requires a containment level (CL) of 3. CL3 laboratories are expensive to build and maintain. Consequently, most countries have centralized TB culture services at regional or national levels. This means that smear microscopy is the most available diagnostic tool in the peripheral healthcare facilities.
There is WHO approval to implement rapid molecular tests like Xpert MTB/RIF at level 4 healthcare facilities, mostly situated at district levels4,5. Some districts are quite large and less accessible to some people. While beneficial, Xpert MTB/RIF works by detecting the Mtb DNA. DNA is a stable molecule that survives long after cells have died and thus is not a good standard for measuring viable cells critical for monitoring treatment response5,6. RNA-based assays offer an alternative for accurate measurement of viable cells7,8,9,10,11,12,13. RNA exists in different species of varying stability: ribosomal RNA (rRNA), transfer RNA (tRNA), and messenger RNA (mRNA). Messenger RNA is associated with gene expression and thus the most closely associated with cell activity and viability14. It is important to note that absence of gene expression is not equivalent to cell death because pathogens like Mtb are known to exist in inactive (dormant) but viable states15,16. Stable RNA species such as rRNA are therefore better markers of both active and inactive states of viable cells.
Using Escherichia coli, Sheridan showed that 16S rRNA proportionally increased with bacterial growth measured by colony forming units (CFU) counts17. There was a concurrent decline in CFU counts and 16S rRNA when E. coli bacteria were exposed to antibiotics. The fall in rRNA following cell death was an indicator that it could be used as a marker for cell viability13,17. Drawing from this principle, the TB molecular bacterial load assay (TB-MBLA) was developed for targeting M. tuberculosis 16S rRNA to measure viable TB bacillary load as a marker of treatment response for patients on anti-TB therapy11,18,19. We have further developed and optimized the TB-MBLA to incorporate a cellular extraction control that reflects lysis of M. tuberculosis bacilli and is robust in different environmental settings20. The TB-MBLA procedure requires the first steps of RNA isolation from Mtb to be conducted in a CL3 laboratory until Mtb cells are completely lysed to ensure the safety of the workers. It also includes sample preservation for retrospective batched analysis to be maintained at -80 &#176;C in guanidine thiocyanate, a level 4 toxic substance. To this end, we have used heat to inactivate Mtb and render samples safe for TB-MBLA to be performed in smear microscopy level laboratories.
Use of heat in laboratory and clinical applications has been around for centuries21,22. However, some microorganisms like Mtb are tough to kill, and shorter exposure to heat is insufficient to kill all the cells23,24. A study revealed that 20 min heating of TB cultures at 80 &#176;C killed all Mtb bacilli without destroying the DNA needed for PCR25. Subsequently, a number of laboratory DNA extraction techniques currently heat to 95 &#176;C. We have applied the same principle to show that boiling TB samples at either 80 &#176;C, 85 &#176;C, or 95 &#176;C inactivates Mtb while preserving sufficient RNA for TB-MBLA to be performed. Inactivated culture or sputum can be maintained in tightly closed containers at room temperature or refrigerated for 7 days without reducing the amount of quantifiable rRNA.
The TB-MBLA, currently used as a research use only (RUO) test is adaptable and has been applied to different sample types including sputum, lung tissue, and cerebral spinal fluid. It is yet to be applied on bronchial alveolar fluid, blood, and other sample types. Using sputum as the sample, results from multisite evaluation in Africa (unpublished data) and previous publications18,26 show that the sensitivity of MBLA is consistent with mycobacterium growth indicator tube (MGIT) liquid culture. However, TB-MBLA is faster, giving results in hours as opposed to days or weeks of culture, specific, not affected by non-TB microorganisms in the sample, and gives a quantitative measure of disease severity. The WHO has recently recognized TB-MBLA as a candidate to replace smear microscopy and culture for monitoring TB treatment2.
In this article we describe in detail the heat inactivation and TB-MBLA protocol published in Sabiiti et al.27. This detailed protocol will provide a one-stop visual resource for the TB-MBLA users across the globe.

<table border="0" cellpadding="0" cellspacing="0" style="width:753px;" width="752">
	<colgroup>
		<col />
		<col />
		<col />
		<col />
	</colgroup>
	<tbody>
		<tr height="21">
			<td height="21" style="height:21px;width:265px;">Heat inactivation:</td>
			<td style="width:99px;"></td>
			<td style="width:107px;"></td>
			<td style="width:283px;"></td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:265px;">15 mL Centrifuge tubes</td>
			<td style="width:99px;">Fisher-Scientific</td>
			<td>10136120</td>
			<td style="width:283px;">50 mL tubes may be used if larger sample volumes are involved</td>
		</tr>
		<tr height="43">
			<td height="43" style="height:43px;width:265px;">15 mL Wire Tube rack</td>
			<td style="width:99px;">Fisher-Scientific</td>
			<td>11749128</td>
			<td style="width:283px;">Other brands with similar make can be used</td>
		</tr>
		<tr height="43">
			<td height="43" style="height:43px;width:265px;">Water bath</td>
			<td style="width:99px;">Fisher-Scientific</td>
			<td>15700619</td>
			<td style="width:283px;">Other brands with similar make can be used</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:265px;">RNA extraction:</td>
			<td style="width:99px;"></td>
			<td style="width:107px;"></td>
			<td></td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;">Chloroform</td>
			<td style="width:99px;">Sigma</td>
			<td>372978-1L</td>
			<td style="width:283px;">Not necessary in other RNA extraction kit brands</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;">Ethanol, absolute 99-100%</td>
			<td style="width:99px;">Sigma</td>
			<td>51976-500ML-F</td>
			<td>Larger volume available</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:265px;">Extraction control</td>
			<td style="width:99px;">SOI group St Andrews</td>
			<td style="width:107px;">VitalbacteriaEC</td>
			<td style="width:283px;">Supplied with the TB-MBLA Vitalbacteria kit</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;">FASTRNA Pro blue Kit</td>
			<td style="width:99px;">MP Biomedicals</td>
			<td>116025050</td>
			<td>Supplied with lysing matrix tubes</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;">Molecular grade water (RNase free)</td>
			<td style="width:99px;">Sigma</td>
			<td>W4502-1L</td>
			<td style="width:283px;">Qiagen, Fisherscientific can also supply same product</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;">Precellys 24 homogeniser</td>
			<td style="width:99px;">VWR</td>
			<td>432-3750</td>
			<td style="width:283px;">FastPrep MP Biomedicals can be used too</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:265px;">Refrigerated micro-centrifuge, Fresco 21, Heraeus</td>
			<td style="width:99px;">Fisher-Scientific</td>
			<td>15352117</td>
			<td style="width:283px;">Other brands with similar capacity can be used</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;">Thermomixer</td>
			<td style="width:99px;">Eppendorf</td>
			<td>BLD-455-010C</td>
			<td>Works with 1-2 mL tubes</td>
		</tr>
		<tr height="43">
			<td height="43" style="height:43px;">TURBO DNA-free</td>
			<td style="width:99px;">Fisher-Scientific</td>
			<td>AM1907M</td>
			<td style="width:283px;">Takes longer but more effective than shorter DNA removal procedures.</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:265px;">RT-qPCR:</td>
			<td style="width:99px;"></td>
			<td style="width:107px;"></td>
			<td></td>
		</tr>
		<tr height="105">
			<td height="105" style="height:105px;width:265px;">Primers and Taqman probes</td>
			<td style="width:99px;">SOI group St Andrews</td>
			<td style="width:107px;">VitalbacteriaPP</td>
			<td style="width:283px;">Supplied with the TB-MBLA Vitalbacteria kit. Probe fluorophores are FAM (green) for Mtb and HEX (yellow) for Extraction control (EC). Applied Biosystems qPCR platforms use VIC instead of HEX.</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;">QuantiTect Multiplex RT-PCR NR Kit</td>
			<td style="width:99px;">Qiagen</td>
			<td style="width:107px;">204845</td>
			<td>PCR mix plus the RT enzyme</td>
		</tr>
		<tr height="63">
			<td height="63" style="height:63px;">RotorGene Q 5plex machine</td>
			<td style="width:99px;">Qiagen</td>
			<td>9001580</td>
			<td style="width:283px;">Other qPCR machines: Vii7, Quantistudio, Steponelus etc can be used</td>
		</tr>
		<tr height="64">
			<td height="64" style="height:64px;">Strip Tubes and Caps, 0.1 ml</td>
			<td style="width:99px;">Qiagen</td>
			<td>981103</td>
			<td style="width:283px;">Other tube sizes available depending on the rotor size. For other PCR platforms 96 well PCR plates are needed.</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;">Non-heat inactivation Sample preservation materials</td>
			<td></td>
			<td></td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;">1M Tris-HCl pH 7.5</td>
			<td style="width:99px;">Sigma</td>
			<td style="width:107px;">93313</td>
			<td>Supplied ready to use</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;">2-Mercaptoethanol</td>
			<td style="width:99px;">Sigma</td>
			<td style="width:107px;">63689</td>
			<td>Many competent suppliers</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;">Guanidine thiocyanate (GTC)</td>
			<td style="width:99px;">Promega</td>
			<td style="width:107px;">V2791</td>
			<td>Promega brand recommended for quality</td>
		</tr>
		<tr height="43">
			<td height="43" style="height:43px;">Molecular grade water (RNase free)</td>
			<td style="width:99px;">Sigma</td>
			<td style="width:107px;">W4502-1L</td>
			<td style="width:283px;">Ensures that GTC solution is free of nucleases</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;">General materials (used but not specific to TB-MBLA)</td>
			<td></td>
			<td></td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;">500 mL plastic containers</td>
			<td style="width:99px;"></td>
			<td style="width:107px;">734-5087</td>
			<td>Nalgene brand recommeded</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;">Biological waste discard jars</td>
			<td style="width:99px;"></td>
			<td style="width:107px;"></td>
			<td>Many competent suppliers</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;">Chemical waste discard jars</td>
			<td style="width:99px;"></td>
			<td style="width:107px;"></td>
			<td>Many competent suppliers</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:265px;">Disposable gloves, chemical resistant</td>
			<td style="width:99px;"></td>
			<td style="width:107px;"></td>
			<td>Many competent suppliers</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;">Freezer (-20 &#176;C)</td>
			<td style="width:99px;"></td>
			<td style="width:107px;"></td>
			<td>Many competent suppliers</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;">Freezer (-80 &#176;C)</td>
			<td style="width:99px;"></td>
			<td style="width:107px;"></td>
			<td>Many competent suppliers</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;">Fridge (0-8 &#176;C)</td>
			<td style="width:99px;"></td>
			<td style="width:107px;"></td>
			<td>Many competent suppliers</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;">Fume hood</td>
			<td style="width:99px;"></td>
			<td style="width:107px;"></td>
			<td>For safe handling of toxic reagents</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;">Laboratory scales</td>
			<td style="width:99px;"></td>
			<td style="width:107px;"></td>
			<td>For accurate measurement of reagents</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;">Measuring cylinders, plastic</td>
			<td style="width:99px;"></td>
			<td style="width:107px;"></td>
			<td style="width:283px;">To ensure accurate measurement of reagents</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;">PCR reaction tubes</td>
			<td style="width:99px;"></td>
			<td style="width:107px;"></td>
			<td style="width:283px;">Should be suitable to the PCR instrument used</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:265px;">Pipettes and matching sterile filtered pipette tips,</td>
			<td style="width:99px;"></td>
			<td style="width:107px;"></td>
			<td style="width:283px;">DNAse and RNAse-free, range: P1000, P200, P10, P2 recommended</td>
		</tr>
		<tr height="63">
			<td height="63" style="height:63px;">Qiagility loading plates</td>
			<td style="width:99px;">Qiagen</td>
			<td style="width:107px;"></td>
			<td style="width:283px;">5-well master mix plate, 16-well reagent plate, 32-well sample plate, 72-well and 96-well reaction plates</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;">QIAgility Pipetting Robot</td>
			<td style="width:99px;">Qiagen</td>
			<td style="width:107px;"></td>
			<td>Important for high throughput pipetting</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:265px;">Racks for 1.5 mL and 2 mL microtubes and for 15 mL and 50 mL Falcon tubes</td>
			<td style="width:99px;"></td>
			<td style="width:107px;"></td>
			<td style="width:283px;">Chemical-resistant and autoclavable recommended</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:265px;">RNase Away (Removes RNases enzymes from working space)</td>
			<td style="width:99px;">Fisher Scientific</td>
			<td style="width:107px;">10666421</td>
			<td style="width:283px;">Important to ensure services and devices are free from RNase enzyme</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;">Safety goggles, chemical resistant</td>
			<td style="width:99px;">Fisher Scientific</td>
			<td style="width:107px;"></td>
			<td style="width:283px;">Can also be got from Sigma. Protect eyes from toxic reagents.</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:265px;">Sterile Pasteur pipettes, 1.5 mL - 3 mL</td>
			<td style="width:99px;"></td>
			<td style="width:107px;"></td>
			<td>Many competent suppliers</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;">Sterile RNAse-free microtubes</td>
			<td style="width:99px;"></td>
			<td style="width:107px;"></td>
			<td style="width:283px;">1.5 mL tubes suitable for freezing at -80 &#176;C recommended</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;">TB disinfectant, e.g. Tristel Fuse</td>
			<td style="width:99px;"></td>
			<td style="width:107px;"></td>
			<td style="width:283px;">Ensure it is freshly prepared or prepared within a week</td>
		</tr>
		<tr height="22">
			<td height="22" style="height:22px;">Vortex</td>
			<td style="width:99px;"></td>
			<td style="width:107px;"></td>
			<td>Genie 2 brand recommended</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:265px;">Transmission electron microscopy</td>
			<td style="width:99px;"></td>
			<td style="width:107px;"></td>
			<td></td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:265px;">Glutaldehyde (8%)</td>
			<td style="width:99px;">Sigma</td>
			<td>G7526-10ML</td>
			<td style="width:283px;">Part of the Cell fixation buffer (HEPES buffer)</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:265px;">HEPES (pH 7.4, 100 mM)</td>
			<td style="width:99px;">Sigma</td>
			<td>H4034-25G</td>
			<td style="width:283px;">Part of the Cell fixation buffer (HEPES buffer)</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;">Leica FCS ultracryo</td>
			<td style="width:99px;">Leica</td>
			<td style="width:107px;"></td>
			<td>Cryomicrotome for tissue sectioning</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;">Methyl cellulose</td>
			<td style="width:99px;">Agar Scientific</td>
			<td>AGG6425</td>
			<td>Cold mounting resin</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:265px;">Paraformaldehyde (4% in PBS)</td>
			<td style="width:99px;">Sigma</td>
			<td>P6148-500G</td>
			<td style="width:283px;">Part of the Cell fixation buffer (HEPES buffer)</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:265px;">Sucrose</td>
			<td style="width:99px;">Sigma</td>
			<td>84097-250G</td>
			<td style="width:283px;">Preservation and mounting medium</td>
		</tr>
		<tr height="43">
			<td height="43" style="height:43px;width:265px;">Uranyl acetate</td>
			<td style="width:99px;">Agar Scientific</td>
			<td>AGR1260A</td>
			<td>Universal Electron microscopy stain</td>
		</tr>
	</tbody>
</table>

a tuberculosis molecular bacterial load assay (tb-mbla)

Tuberculosis is caused by Mycobacterium tuberculosis (Mtb), a pathogen classified by the United Nations (UN) as a dangerous category B biological substance. For the sake of the workers&#8217; safety, handling of all samples presumed to carry Mtb must be conducted in a containment level (CL) 3 laboratory. The TB molecular bacterial load assay (TB-MBLA) test is a reverse transcriptase quantitative polymerase chain reaction (RT-qPCR) test that quantifies Mtb bacillary load using primers and dual-labelled probes for 16S rRNA. We describe the use of heat inactivation to render TB samples noninfectious while preserving RNA for the TB-MBLA. A 1 mL aliquot of the sputum sample in tightly closed 15 mL centrifuge tubes is boiled for 20 min at either 80 &#176;C, 85 &#176;C, or 95 &#176;C to inactivate Mtb bacilli. Cultivation of the heat inactivated and control (live) samples for 42 days confirmed the death of TB. The inactivated sample is then spiked with 100 &#181;L of the extraction control and RNA is extracted following the standard RNA isolation procedure. No growth was observed in the cultures of heat treated samples. The isolated RNA is subjected to real-time RT-qPCR, which amplifies a specific target in the Mtb 16S rRNA gene, yielding results in the form of quantification cycles (Cq). A standard curve is used to translate Cq into bacterial load, or estimated colony forming units per mL (eCFU/mL). There is an inverse relationship between Cq and the bacterial load of a sample. The limitation is that heat inactivation lyses some cells, exposing the RNA to RNases that cause a loss of &#60;1 log10eCFU/mL (i.e., &#60;10 CFU/mL). Further studies will determine the proportion of very low burden patients that cause false negative results due to heat inactivation.

Heat inactivates all M. tuberculosis bacilli 
The optical density (OD) of controls (live cells) increased over time, (0.04OD&#8211;0.85OD) and no OD change was observed in the heat inactivated samples, signifying growth and no growth respectively (Figure 1)27. Similarly, control clinical sputum grew positive by day 3 in MGIT while heat inactivated clinical samples did not flag positive until the end of incubation. Growth of Mtb in MGIT was confirmed by Ziehl-Neelsen smear microscopy and the antigen MPT6429.
RNA in inactivated samples is stable at 37 &#176;C for 4 days 
Heat inactivated samples were incubated at 37 &#176;C to determine whether RNA degrades following heat inactivation of cells. No difference was found between the RNA harvested at Day (D) 0 immediately after heat inactivation and the RNA isolated at D1, 2, 3, and 4 in both BCG cultures (Figure 2A-C) and TB positive sputum (Figure 2D).
Exogenous RNase increases the rate of RNA degradation in the heat inactivated fractions 
To determine why RNA was not degrading, RNase A enzyme was exogenously added at 1,000 U/mL before and/or after heat inactivation. This caused RNA loss equivalent to bacterial load 1.5 &#177; 0.3 -, 1.8 &#177; 0.2 -, and 1.3 &#177; 0.1 &#8211; log10&#160;eCFU/mL at 80 &#176;C, 85 &#176;C, and 95 &#176;C respectively across 4 days of incubation. There was a difference in the RNA degraded in samples where RNase was added before and/or after heat inactivation (Figure 3A-C).
Sufficient RNA is preserved for TB-MBLA using 16S rRNA as reference marker 
The effect of heat inactivation on rRNA was measured in BCG cultures and sputum from TB positive patients. The measured bacterial load of control BCG culture, 5.3 &#177; 0.2 log10&#160;eCFU/mL, was 0.2 &#177; 0.1 log10&#160;eCFU/mL higher than the combined 5.1 &#177; 0.3 log10&#160;eCFU/mL of heat inactivated culture (ANOVA p &#60; 0.0001) at 80 &#176;C, 85 &#176;C, and 95 &#176;C (Figure 4A)27. Similarly, the bacterial load of control patient sputum, 7.1 log10&#160;eCFU/mL, was 0.8 &#177; 0.1 log10&#160;eCFU/mL higher than the combined 6.3 &#177; 0.41 log10eCFU/mL at 80 &#176;C, 85 &#176;C, and 95 &#176;C (Figure 4B)27. The bacterial load reduction was &#60;1log in the two types of samples tested.
Sidak&#8217;s multiple comparisons test revealed a significant difference between the bacterial load at 95 &#176;C versus that of 80 &#176;C and 85 &#176;C (p = 0.001). No difference was found in TB samples at all temperatures, p = 0.8.
Cell wall integrity is not destroyed by heat in the majority of Mtb cells 
Using transmission electron microscopy (TEM) we investigated whether cells were lysed by heat inactivation. Thin sections of paraformaldehyde fixed pellets of cells were made and embedded in an electron rich medium prior to examination by TEM. Inspection of the cells at lower and higher magnification revealed intact cell wall and visible intracellular lipid bodies. Cells morphologically appeared elongated but not lysed. Figure 5 illustrates the morphology of mycobacterium cells at different magnifications. The top two panels reveal intracellular lipid bodies and the unhampered rope-like cording, a morphological characteristic typical of mycobacterium species. The lower two panels are higher magnification expanding the view of lipid bodies and revealing some micro-intracellular structures.
Bacterial load measured by TB-MBLA is inversely correlated to MGIT culture time to positivity 
For patients responding to therapy, the bacterial load falls at an average 1 log10&#160;eCFU/mL per week over the course of treatment. Fast responders clear faster, converting to negative (zero bacterial load) by 2 weeks of treatment. The fall in bacterial load measured by TB-MBLA corresponded to the rise in MGIT culture time to positivity (TTP). Figure 6 demonstrates the inverse correlation found between bacterial load and MGIT TTP. The difference, however, is that the TB-MBLA results are available in 4 h and time-to-result is independent of the level of bacterial load. This is in contrast with 5&#8211;25 days for MGIT culture tests. Contamination with non-TB bacteria further compromise the results from culture tests.
<img alt="Figure 1" class="xfigimg" src="/files/ftp_upload/60460/60460fig1v3.jpg" /> 
Figure 1: Verification of BCG inactivation at 80 &#176;C (dot pattern curve), 85 &#176;C (dot-dash pattern curve), and 95 &#176;C (dash pattern curve). The control (black curve) was live (unheated) BCG culture inoculated into same growth medium. Growth in the control was confirmed by the increase in the OD of the culture over the incubation period. This figure was modified from Sabiiti et al.27. <a href="https://www.jove.com/files/ftp_upload/60460/60460fig1large.jpg" target="_blank">Please click here to view a larger version of this figure.</a>
<img alt="Figure 2" class="xfigimg" src="/files/ftp_upload/60460/60460fig2v3.jpg" /> 
Figure 2: Stability of quantifiable RNA in heat inactivated sample incubated at 37 &#176;C for 4 days (D0&#8211;D4). (A), (B), and (C) show BCG cultures inactivated at 80 &#176;C, 85 &#176;C, and 95 &#176;C respectively. (D) shows the TB sputum inactivated at 80 &#176;C. The control is the untreated (live) fraction of the same sample. Error bars = standard deviation. Three repeats, nine replicates per run. <a href="https://www.jove.com/files/ftp_upload/60460/60460fig2large.jpg" target="_blank">Please click here to view a larger version of this figure.</a>
<img alt="Figure 3" class="xfigimg" src="/files/ftp_upload/60460/60460fig3v2.jpg" /> 
Figure 3: Higher RNA degradation after exogenous addition of RNase A enzyme. (A) Heat inactivation (HI) at 80 &#176;C, (B) HI at 85 &#176;C, and (C) HI 95 &#176;C. Error bars = standard error of the mean. <a href="https://www.jove.com/files/ftp_upload/60460/60460fig3large.jpg" target="_blank">Please click here to view a larger version of this figure.</a>
<img alt="Figure 4" class="xfigimg" src="/files/ftp_upload/60460/60460fig4v2.jpg" /> 
Figure 4: The preservation of sufficient RNA for TB-MBLA bacterial load measurement using 16S rRNA as a marker. (A) Bacterial load estimated from in vitro BCG cultures. (B) Bacterial load estimated from tuberculosis positive sputum. Error bars = standard error of the mean (n = 18 and 20 replicates for A and B respectively). This figure was modified from Sabiiti et al.27. <a href="https://www.jove.com/files/ftp_upload/60460/60460fig4large.jpg" target="_blank">Please click here to view a larger version of this figure.</a>
<img alt="Figure 5" class="xfigimg" src="/files/ftp_upload/60460/60460fig5.jpg" /> 
Figure 5: Electron micrographs of intact Mtb bacilli after inactivation at 95 &#176;C for 20 min. Clear intact cell wall and enumerable lipid bodies were observed with TEM. Top: low magnification images of a group of cells revealing unhampered mycobacterial rope-like cording morphology and intracellular lipid bodies. Bottom: high magnification of the top panels to expand the view of lipid bodies and revealing some micro-intracellular structures. <a href="https://www.jove.com/files/ftp_upload/60460/60460fig5large.jpg" target="_blank">Please click here to view a larger version of this figure.</a>
<img alt="Figure 6" class="xfigimg" src="/files/ftp_upload/60460/60460fig6.jpg" /> 
Figure 6: The 12 week treatment response curve of a patient on anti-TB therapy showing an inverse correlation of TB-MBLA measured bacterial load and MGIT TTP. The bacterial load (blue curve) falls while TTP rises (red curve) as the patient responds to treatment. <a href="https://www.jove.com/files/ftp_upload/60460/60460fig6large.jpg" target="_blank">Please click here to view a larger version of this figure.</a>
<table border="1" fo:keep-together.within-page="1">
	<tbody>
		<tr>
			<td rowspan="2">Master mix</td>
			<td>RT positive reaction</td>
			<td>RT negative reaction</td>
		</tr>
		<tr>
			<td>Volume per reaction x no. of reactions + 5</td>
			<td>Volume per reaction x no. of reactions + 5</td>
		</tr>
		<tr>
			<td>Quantitect mix</td>
			<td>10.0 &#956;L</td>
			<td>10.0 &#956;L</td>
		</tr>
		<tr>
			<td>Mtb16S primer mix (F + R)</td>
			<td>0.4 &#956;L</td>
			<td>0.4 &#956;L</td>
		</tr>
		<tr>
			<td>Mtb16S probe</td>
			<td>0.2 &#956;L</td>
			<td>0.2 &#956;L</td>
		</tr>
		<tr>
			<td>EC primer mix (F + R)</td>
			<td>0.4 &#956;L</td>
			<td>0.4 &#956;L</td>
		</tr>
		<tr>
			<td>EC probe</td>
			<td>0.2 &#956;L</td>
			<td>0.2 &#956;L</td>
		</tr>
		<tr>
			<td>RT enzyme</td>
			<td>0.2 &#956;L</td>
			<td>-------</td>
		</tr>
		<tr>
			<td>RNase free water</td>
			<td>4.6 &#956;L</td>
			<td>4.8 &#956;L</td>
		</tr>
		<tr>
			<td>Total volume</td>
			<td>16 &#181;L</td>
			<td>16 &#956;L</td>
		</tr>
	</tbody>
</table>
Table 1: Master mix preparation guide for the TB-MBLA qPCR.
<table border="1" fo:keep-together.within-page="1">
	<tbody>
		<tr>
			<td>Type</td>
			<td>MTB channel</td>
			<td>EC channel</td>
			<td>Interpretation</td>
		</tr>
		<tr>
			<td>Sample</td>
			<td>Positive</td>
			<td>Positive</td>
			<td>Valid</td>
		</tr>
		<tr>
			<td>Sample</td>
			<td>Positive</td>
			<td>Negative</td>
			<td>Indeterminate</td>
		</tr>
		<tr>
			<td>Sample</td>
			<td>Negative</td>
			<td>Positive</td>
			<td>Valid</td>
		</tr>
		<tr>
			<td>Sample</td>
			<td>Negative</td>
			<td>Negative</td>
			<td>Invalid</td>
		</tr>
		<tr>
			<td>MTB + Control</td>
			<td>Positive</td>
			<td>Negative</td>
			<td>Valid</td>
		</tr>
		<tr>
			<td>Extraction Control (EC)</td>
			<td>Negative</td>
			<td>Positive</td>
			<td>Valid</td>
		</tr>
		<tr>
			<td>DNA control</td>
			<td>Negative</td>
			<td>Negative</td>
			<td>Valid</td>
		</tr>
		<tr>
			<td>Negative Control (NTC)</td>
			<td>Negative</td>
			<td>Negative</td>
			<td>Valid</td>
		</tr>
	</tbody>
</table>
Table 2: TB-MBLA results interpretation guide.

Watch this Scientific Journal Video about A Tuberculosis Molecular Bacterial Load Assay TB-MBLA at JoVE.com

A Tuberculosis Molecular Bacterial Load Assay TB-MBLA

We describe a tuberculosis molecular bacterial load assay test performed after heat inactivation of sputum. Heat inactivation renders sputum samples noninfectious and obviates the need for containment level 3 laboratories for tuberculosis molecular tests.

A Tuberculosis Molecular Bacterial Load Assay (TB-MBLA)

Tuberculosis is caused by Mycobacterium tuberculosis (Mtb), a pathogen classified by the United Nations (UN) as a dangerous category B biological ...

a-tuberculosis-molecular-bacterial-load-assay-tb-mbla

Research

JoVE Journal

Immunology and Infection

13.8K Views.  University of St Andrews. We describe a tuberculosis molecular bacterial load assay test performed after heat inactivation of sputum. Heat inactivation renders sputum samples noninfectious and obviates the need for containment level 3 laboratories for tuberculosis molecular tests.

Video: A Tuberculosis Molecular Bacterial Load Assay TB-MBLA

Using Luciferase to Image Bacterial Infections in Mice

Imaging is a valuable technique that can be used to monitor biological processes. In particular, the presence of cancer cells, stem cells, specific immune cell types, viral pathogens, parasites and bacteria can be followed in real-time within living animals 1-2. Application of bioluminescence imaging to the study of pathogens has advantages as compared to conventional strategies for analysis of infections in animal models3-4. Infections can be visualized within individual animals over time, without requiring euthanasia to determine the location and quantity of the pathogen. Optical imaging allows comprehensive examination of all tissues and organs, rather than sampling of sites previously known to be infected. In addition, the accuracy of inoculation into specific tissues can be directly determined prior to carrying forward animals that were unsuccessfully inoculated throughout the entire experiment. Variability between animals can be controlled for, since imaging allows each animal to be followed individually. Imaging has the potential to greatly reduce animal numbers needed because of the ability to obtain data from numerous time points without having to sample tissues to determine pathogen load3-4.
This protocol describes methods to visualize infections in live animals using bioluminescence imaging for recombinant strains of bacteria expressing luciferase. The click beetle (CBRLuc) and firefly luciferases (FFluc) utilize luciferin as a substrate5-6. The light produced by both CBRluc and FFluc has a broad wavelength from 500 nm to 700 nm, making these luciferases excellent reporters for the optical imaging in living animal models7-9. This is primarily because wavelengths of light greater than 600 nm are required to avoid absorption by hemoglobin and, thus, travel through mammalian tissue efficiently. Luciferase is genetically introduced into the bacteria to produce light signal10. Mice are pulmonary inoculated with bioluminescent bacteria intratracheally to allow monitoring of infections in real time. After luciferin injection, images are acquired using the IVIS Imaging System. During imaging, mice are anesthetized with isoflurane using an XGI-8 Gas Anethesia System. Images can be analyzed to localize and quantify the signal source, which represents the bacterial infection site(s) and number, respectively. After imaging, CFU determination is carried out on homogenized tissue to confirm the presence of bacteria. Several doses of bacteria are used to correlate bacterial numbers with luminescence. Imaging can be applied to study of pathogenesis and evaluation of the efficacy of antibacterial compounds and vaccines.

Methods for bioluminescence imaging of bacterial infections in living animals are decribed. Pathogens are modified to express luciferase allowing optical whole body imaging of infections in live animals. Animal models can be infected with luciferase expressing pathogens and the resulting course of disease visualized in real-time by bioluminescence imaging.

Imaging is a valuable technique that can be used to monitor biological processes.  In particular, the presence of cancer cells, stem cells, specific ...

'Bioluminescent' Reporter Phage for the Detection of Category A Bacterial Pathogens

Yersinia pestis and Bacillus anthracis are Category A bacterial pathogens that are the causative agents of the plague and anthrax, respectively 1. Although the natural occurrence of both diseases&#39; is now relatively rare, the possibility of terrorist groups using these pathogens as a bioweapon is real. Because of the disease&#39;s inherent communicability, rapid clinical course, and high mortality rate, it is critical that an outbreak be detected quickly. Therefore methodologies that provide rapid detection and diagnosis are essential to ensure immediate implementation of public health measures and activation of crisis management.
Recombinant reporter phage may provide a rapid and specific approach for the detection of Y. pestis and B. anthracis. The Centers for Disease Control and Prevention currently use the classical phage lysis assays for the confirmed identification of these bacterial pathogens 2-4. These assays take advantage of naturally occurring phage which are specific and lytic for their bacterial hosts. After overnight growth of the cultivated bacterium in the presence of the specific phage, the formation of plaques (bacterial lysis) provides a positive identification of the bacterial target. Although these assays are robust, they suffer from three shortcomings: 1) they are laboratory based; 2) they require bacterial isolation and cultivation from the suspected sample, and 3) they take 24-36 h to complete. To address these issues, recombinant &#34;light-tagged&#34; reporter phage were genetically engineered by integrating the Vibrio harveyi luxAB genes into the genome of Y. pestis and B. anthracis specific phage 5-8. The resulting luxAB reporter phage were able to detect their specific target by rapidly (within minutes) and sensitively conferring a bioluminescent phenotype to recipient cells. Importantly, detection was obtained either with cultivated recipient cells or with mock-infected clinical specimens 7.
For demonstration purposes, here we describe the method for the phage-mediated detection of a known Y. pestis isolate using a luxAB reporter phage constructed from the CDC plague diagnostic phage &#934;A1122 6,7 (Figure 1). A similar method, with minor modifications (e.g. change in growth temperature and media), may be used for the detection of B. anthracis isolates using the B. anthracis reporter phage W&#946;::luxAB 8. The method describes the phage-mediated transduction of a biolumescent phenotype to cultivated Y. pestis cells which are subsequently measured using a microplate luminometer. The major advantages of this method over the traditional phage lysis assays is the ease of use, the rapid results, and the ability to test multiple samples simultaneously in a 96-well microtiter plate format.
<img alt="Figure 1" src="/files/ftp_upload/2740/2740fig1.jpg" /> 
Figure 1. Detection schematic. The phage are mixed with the sample, the phage infects the cell, luxAB are expressed, and the cell bioluminesces. Sample processing is not necessary; the phage and cells are mixed and subsequently measured for light.

A simple method for the identification of priority bacterial pathogens is to use genetically engineered reporter phage. These reporter phage, which are specific to their particular host species, are capable of rapidly transducing a bioluminescent signal response to host cells. Herein, we describe the use of reporter phage for the detection of Yersinia pestis.

Yersinia pestis and Bacillus anthracis are Category A bacterial pathogens that are the causative agents of the plague and anthrax, respectively 1. ...

Measuring Bacterial Load and Immune Responses in Mice Infected with Listeria monocytogenes

Listeria monocytogenes (Listeria) is a Gram-positive facultative intracellular pathogen1. Mouse studies typically employ intravenous injection of Listeria, which results in systemic infection2. After injection, Listeria quickly disseminates to the spleen and liver due to uptake by CD8&alpha;+ dendritic cells and Kupffer cells3,4. Once phagocytosed, various bacterial proteins enable Listeria to escape the phagosome, survive within the cytosol, and infect neighboring cells5. During the first three days of infection, different innate immune cells (e.g. monocytes, neutrophils, NK cells, dendritic cells) mediate bactericidal mechanisms that minimize Listeria proliferation. CD8+ T cells are subsequently recruited and responsible for the eventual clearance of Listeria from the host, typically within 10 days of infection6.
Successful clearance of Listeria from infected mice depends on the appropriate onset of host immune responses6	. There is a broad range of sensitivities amongst inbred mouse strains7,8. Generally, mice with increased susceptibility to Listeria infection are less able to control bacterial proliferation, demonstrating increased bacterial load and/or delayed clearance compared to resistant mice. Genetic studies, including linkage analyses and knockout mouse strains, have identified various genes for which sequence variation affects host responses to Listeria infection6,8-14. Determination and comparison of infection kinetics between different mouse strains is therefore an important method for identifying host genetic factors that contribute to immune responses against Listeria. Comparison of host responses to different Listeria strains is also an effective way to identify bacterial virulence factors that may serve as potential targets for antibiotic therapy or vaccine design.
We describe here a straightforward method for measuring bacterial load (colony forming units [CFU] per tissue) and preparing single-cell suspensions of the liver and spleen for FACS analysis of immune responses in Listeria-infected mice. This method is particularly useful for initial characterization of Listeria infection in novel mouse strains, as well as comparison of immune responses between different mouse strains infected with Listeria. We use the Listeria monocytogenes EGD strain15 that, when cultured on blood agar, exhibits a characteristic halo zone around each colony due to &beta;-hemolysis1 (Figure 1). Bacterial load and immune responses can be determined at any time-point after infection by culturing tissue homogenate on blood agar plates and preparing tissue cell suspensions for FACS analysis using the protocols described below. We would note that individuals who are immunocompromised or pregnant should not handle Listeria, and the relevant institutional biosafety committee and animal facility management should be consulted before work commences.

Measuring Bacterial Load and Immune Responses in Mice Infected with Listeria monocytogenes

Listeria monocytogenes is a model organism for studying immune responses and genetic susceptibility to intracellular bacteria in mice. This method enables one to measure bacterial load and generate single-cell suspensions of the liver and spleen from mice for FACS analysis to determine changes in immune cells due to Listeria infection.

Listeria monocytogenes (Listeria) is a Gram-positive facultative intracellular pathogen1. Mouse studies typically employ intravenous injection of ...

Growth of Mycobacterium tuberculosis Biofilms

Mycobacterium tuberculosis, the etiologic agent of human tuberculosis, has an extraordinary ability to survive against environmental stresses including antibiotics. Although stress tolerance of M. tuberculosis is one of the likely contributors to the 6-month long chemotherapy of tuberculosis 1, the molecular mechanisms underlying this characteristic phenotype of the pathogen remain unclear. Many microbial species have evolved to survive in stressful environments by self-assembling in highly organized, surface attached, and matrix encapsulated structures called biofilms 2-4. Growth in communities appears to be a preferred survival strategy of microbes, and is achieved through genetic components that regulate surface attachment, intercellular communications, and synthesis of extracellular polymeric substances (EPS) 5,6. The tolerance to environmental stress is likely facilitated by EPS, and perhaps by the physiological adaptation of individual bacilli to heterogeneous microenvironments within the complex architecture of biofilms 7.
In a series of recent papers we established that M. tuberculosis and Mycobacterium smegmatis have a strong propensity to grow in organized multicellular structures, called biofilms, which can tolerate more than 50 times the minimal inhibitory concentrations of the anti-tuberculosis drugs isoniazid and rifampicin 8-10. M. tuberculosis, however, intriguingly requires specific conditions to form mature biofilms, in particular 9:1 ratio of headspace: media as well as limited exchange of air with the atmosphere 9. Requirements of specialized environmental conditions could possibly be linked to the fact that M. tuberculosis is an obligate human pathogen and thus has adapted to tissue environments. In this publication we demonstrate methods for culturing M. tuberculosis biofilms in a bottle and a 12-well plate format, which is convenient for bacteriological as well as genetic studies. We have described the protocol for an attenuated strain of M. tuberculosis, mc27000, with deletion in the two loci, panCD and RD1, that are critical for in vivo growth of the pathogen 9. This strain can be safely used in a BSL-2 containment for understanding the basic biology of the tuberculosis pathogen thus avoiding the requirement of an expensive BSL-3 facility. The method can be extended, with appropriate modification in media, to grow biofilm of other culturable mycobacterial species.
Overall, a uniform protocol of culturing mycobacterial biofilms will help the investigators interested in studying the basic resilient characteristics of mycobacteria. In addition, a clear and concise method of growing mycobacterial biofilms will also help the clinical and pharmaceutical investigators to test the efficacy of a potential drug.

Growth of Mycobacterium tuberculosis Biofilms

Mycobacterium tuberculosis forms drug tolerant biofilms when cultured in certain conditions. Here we describe methods for culturing M. tuberculosis biofilms and determining the frequency of drug tolerant persisters. These protocols will be useful for further studies into the mechanisms of drug tolerance in M. tuberculosis.

Mycobacterium tuberculosis, the etiologic agent of human tuberculosis, has an extraordinary ability to survive against environmental stresses including ...

A Visual Assay to Monitor T6SS-mediated Bacterial Competition

Type VI secretion systems (T6SSs) are molecular nanomachines allowing Gram-negative bacteria to transport and inject proteins into a wide variety of target cells1,2. The T6SS is composed of 13 core components and displays structural similarities with the tail-tube of bacteriophages3. The phage uses a tube and a puncturing device to penetrate the cell envelope of target bacteria and inject DNA. It is proposed that the T6SS is an inverted bacteriophage device creating a specific path in the bacterial cell envelope to drive effectors and toxins to the surface. The process could be taken further and the T6SS device could perforate other cells with which the bacterium is in contact, thus injecting the effectors into these targets. The tail tube and puncturing device parts of the T6SS are made with Hcp and VgrG proteins, respectively4,5.
The versatility of the T6SS has been demonstrated through studies using various bacterial pathogens. The Vibrio cholerae T6SS can remodel the cytoskeleton of eukaryotic host cells by injecting an "evolved" VgrG carrying a C-terminal actin cross-linking domain6,7. Another striking example was recently documented using Pseudomonas aeruginosa which is able to target and kill bacteria in a T6SS-dependent manner, therefore promoting the establishment of bacteria in specific microbial niches and competitive environment8,9,10.
In the latter case, three T6SS-secreted proteins, namely Tse1, Tse2 and Tse3 have been identified as the toxins injected in the target bacteria (Figure 1). The donor cell is protected from the deleterious effect of these effectors via an anti-toxin mechanism, mediated by the Tsi1, Tsi2 and Tsi3 immunity proteins8,9,10. This antimicrobial activity can be monitored when T6SS-proficient bacteria are co-cultivated on solid surfaces in competition with other bacterial species or with T6SS-inactive bacteria of the same species8,11,12,13.
The data available emphasized a numerical approach to the bacterial competition assay, including time-consuming CFU counting that depends greatly on antibiotic makers. In the case of antibiotic resistant strains like P. aeruginosa, these methods can be inappropriate. Moreover, with the identification of about 200 different T6SS loci in more than 100 bacterial genomes14, a convenient screening tool is highly desirable. We developed an assay that is easy to use and requires standard laboratory material and reagents. The method offers a rapid and qualitative technique to monitor the T6SS-dependent bactericidal/bacteriostasis activity by using a reporter strain as a prey (in this case Escherichia coli DH5&alpha;) allowing a-complementation of the lacZ gene. Overall, this method is graphic and allows rapid identification of T6SS-related phenotypes on agar plates. This experimental protocol may be adapted to other strains or bacterial species taking into account specific conditions such as growth media, temperature or time of contact.

We describe a qualitative assay to monitor bacterial competition mediated by the Pseudomonas aeruginosa type VI secretion system (T6SS). The assay relies on the survival/killing of Escherichia coli target cells carrying a lacZ-reporter. This technique is adjustable to assess the bactericidal/bacteriostasis activity of T6SS-proficient microorganisms.

Type VI secretion systems (T6SSs) are molecular  nanomachines allowing Gram-negative bacteria to transport and inject proteins  into a wide variety of ...

Generation and Multi-phenotypic High-content Screening of Coxiella burnetii Transposon Mutants

Invasion and colonization of host cells by bacterial pathogens depend on the activity of a large number of prokaryotic proteins, defined as virulence factors, which can subvert and manipulate key host functions. The study of host/pathogen interactions is therefore extremely important to understand bacterial infections and develop alternative strategies to counter infectious diseases. This approach however, requires the development of new high-throughput assays for the unbiased, automated identification and characterization of bacterial virulence determinants. Here, we describe a method for the generation of a GFP-tagged mutant library by transposon mutagenesis and the development of high-content screening approaches for the simultaneous identification of multiple transposon-associated phenotypes. Our working model is the intracellular bacterial pathogen Coxiellaburnetii, the etiological agent of the zoonosis Q fever, which is associated with severe outbreaks with a consequent health and economic burden. The obligate intracellular nature of this pathogen has, until recently, severely hampered the identification of bacterial factors involved in host pathogen interactions, making of Coxiella the ideal model for the implementation of high-throughput/high-content approaches.

Generation and Multi-phenotypic High-content Screening of Coxiella burnetii Transposon Mutants

Coxiella burnetii is an obligate intracellular Gram-negative bacterium responsible for the zoonotic disease Q fever. Here we describe methods for the generation of Coxiella fluorescent transposon mutants as well as the automated identification and analysis of the resulting internalization, replication and cytotoxic phenotypes.

Invasion and colonization of host cells by bacterial pathogens depend on the activity of a large number of prokaryotic proteins, defined as virulence ...

A High-throughput Compatible Assay to Evaluate Drug Efficacy against Macrophage Passaged Mycobacterium tuberculosis

The early drug development process for anti-tuberculosis drugs is hindered by the inefficient translation of compounds with in vitro activity to effectiveness in the clinical setting. This is likely due to a lack of consideration for the physiologically relevant cellular penetration barriers that exist in the infected host. We recently established an alternative infection model that generates large macrophage aggregate structures containing densely packed M. tuberculosis (Mtb) at its core, which was suitable for drug susceptibility testing. This infection model is inexpensive, rapid, and most importantly BSL-2 compatible. Here, we describe the experimental procedures to generate Mtb/macrophage aggregate structures that would produce macrophage-passaged Mtb for drug susceptibility testing. In particular, we demonstrate how this infection system could be directly adapted to the 96-well plate format showing throughput capability for the screening of compound libraries against Mtb. Overall, this assay is a valuable addition to the currently available Mtb drug discovery toolbox due to its simplicity, cost effectiveness, and scalability.

A High-throughput Compatible Assay to Evaluate Drug Efficacy against Macrophage Passaged Mycobacterium tuberculosis

New models and assays that would improve the early drug development process for next-generation anti-tuberculosis drugs are highly desirable. Here, we describe a quick, inexpensive, and BSL-2 compatible assay to evaluate drug efficacy against Mycobacterium tuberculosis that can be easily adapted for high-throughput screening.

The early drug development process for anti-tuberculosis drugs is hindered by the inefficient translation of compounds with in vitro activity to ...

An In Vitro Caseum Binding Assay that Predicts Drug Penetration in Tuberculosis Lesions

The eradication of tuberculosis disease requires drug regimens that can penetrate the multiple layers of complex pulmonary lesions. Drug distribution in the caseous cores of cavities and lesions is especially crucial because they harbor subpopulations of drug-tolerant bacteria also commonly referred to as persisters. Existing methods for the measurement of drug penetration in tuberculosis lesions involve costly and time-consuming in vivo pharmacokinetic studies coupled to bioanalytical or imaging techniques. The in vitro measurement of drug binding to caseum macromolecules was proposed as an alternative to such techniques since this binding hinders the passive diffusion of drug molecules through caseum. Rapid equilibrium dialysis is a fast and reliable system for performing plasma protein and tissue binding studies. In this protocol, we used a rapid equilibrium dialysis (RED) device to measure drug binding to homogenates of caseum that is excised from the lesions and cavities of tuberculosis-infected rabbits. The protocol also describes how to generate a surrogate matrix from lipid loaded THP-1 macrophages to use in place of caseum. This caseum/surrogate binding assay is an important tool in tuberculosis drug discovery and can be adapted to help study drug distribution in lesions or abscesses caused by other diseases.

An In Vitro Caseum Binding Assay that Predicts Drug Penetration in Tuberculosis Lesions

Here we describe a rapid equilibrium dialysis (RED) method to measure drug binding to caseum from pulmonary tuberculosis lesions and cavities. The protocol is also used with a foamy macrophage-derived matrix that is an effective surrogate to caseum.

The eradication of tuberculosis disease requires drug regimens that can penetrate the multiple layers of complex pulmonary lesions. Drug distribution in ...

Analysis of 18FDG PET/CT Imaging as a Tool for Studying Mycobacterium tuberculosis Infection and Treatment in Non-human Primates

Mycobacterium tuberculosis remains the number one infectious agent in the world today. With the emergence of antibiotic resistant strains, new clinically relevant methods are needed that evaluate the disease process and screen for potential antibiotic and vaccine treatments. Positron Emission Tomography/Computed Tomography (PET/CT) has been established as a valuable tool for studying a number of afflictions such as cancer, Alzheimer&#39;s disease, and inflammation/infection. Outlined here are a number of strategies that have been employed to evaluate PET/CT images in cynomolgus macaques that are infected intrabronchially with low doses of M. tuberculosis. Through evaluation of lesion size on CT and uptake of 18F-fluorodeoxyglucose (FDG) in lesions and lymph nodes in PET images, these described methods show that PET/CT imaging can predict future development of active versus latent disease and the propensity for reactivation from a latent state of infection. Additionally, by analyzing the overall level of lung inflammation, these methods determine antibiotic efficacy of drugs against M. tuberculosis in the most clinically relevant existing animal model. These image analysis methods are some of the most powerful tools in the arsenal against this disease as not only can they evaluate a number of characteristics of infection and drug treatment, but they are also directly translatable to a clinical setting for use in human studies.

Analysis of 18FDG PET/CT Imaging as a Tool for Studying Mycobacterium tuberculosis Infection and Treatment in Non-human Primates

Here, we present a protocol to describe the analysis of 18F-FDG PET/CT imaging in non-human primates that have been infected with M. tuberculosis to study disease process, drug treatment, and disease reactivation.

Mycobacterium tuberculosis remains the number one infectious agent in the world today. With the emergence of antibiotic resistant strains, new clinically ...

Imaging Mycobacterium tuberculosis in Mice with Reporter Enzyme Fluorescence

Reporter enzyme fluorescence (REF) utilizes substrates that are specific for enzymes present in target organisms of interest for imaging or detection by fluorescence or bioluminescence. We utilize BlaC, an enzyme expressed constitutively by all M. tuberculosis strains. REF allows rapid quantification of bacteria in lungs of infected mice. The same group of mice can be imaged at many time points, greatly reducing costs, enumerating bacteria more quickly, allowing novel observations in host-pathogen interactions, and increasing statistical power, since more animals per group are readily maintained. REF is extremely sensitive due to the catalytic nature of the BlaC enzymatic reporter and specific due to the custom flourescence resonance energy transfer (FRET) or fluorogenic substrates used. REF does not require recombinant strains, ensuring normal host-pathogen interactions. We describe the imaging of M. tuberculosis infection using a FRET substrate with maximal emission at 800 nm. The wavelength of the substrate allows sensitive deep tissue imaging in mammals. We will outline aerosol infection of mice with M. tuberculosis, anesthesia of mice, administration of the REF substrate, and optical imaging. This method has been successfully applied to evaluating host-pathogen interactions and efficacy of antibiotics targeting M. tuberculosis.

Imaging Mycobacterium tuberculosis in Mice with Reporter Enzyme Fluorescence

We describe the optical imaging of mice infected with Mycobacterium tuberculosis (M. tuberculosis) using reporter enzyme fluorescence (REF). This protocol facilitates the sensitive and specific detection of M. tuberculosis in pre-clinical animal models for pathogenesis, therapeutics and vaccine research.

Reporter enzyme fluorescence (REF) utilizes substrates that are specific for enzymes present in target organisms of interest for imaging or detection by ...

A Tuberculosis Molecular Bacterial Load Assay (TB-MBLA)

Podsumowanie

Przeglądaj więcej filmów

Rozdziały w tym wideo

Using Luciferase to Image Bacterial Infections in Mice

'Bioluminescent' Reporter Phage for the Detection of Category A Bacterial Pathogens

Measuring Bacterial Load and Immune Responses in Mice Infected with Listeria monocytogenes

Growth of Mycobacterium tuberculosis Biofilms

A Visual Assay to Monitor T6SS-mediated Bacterial Competition

Generation and Multi-phenotypic High-content Screening of Coxiella burnetii Transposon Mutants

A High-throughput Compatible Assay to Evaluate Drug Efficacy against Macrophage Passaged Mycobacterium tuberculosis

An In Vitro Caseum Binding Assay that Predicts Drug Penetration in Tuberculosis Lesions

Analysis of ¹⁸FDG PET/CT Imaging as a Tool for Studying Mycobacterium tuberculosis Infection and Treatment in Non-human Primates

Imaging Mycobacterium tuberculosis in Mice with Reporter Enzyme Fluorescence