Name: a protocol for using f&#246;rster resonance energy transfer (fret)-force biosensors to measure mechanical forces across the nuclear linc complex
Uploaded: 2017-04-11T12:30:00
Description: Watch this Scientific Journal Video about A Protocol for Using FÃ¶rster Resonance Energy Transfer FRET-force Biosensors to Measure Mechanical Forces across the Nuclear LINC Complex at JoVE.com

This work was supported by the Thomas F. and Kate Miller Jeffress Memoria Trust (to DEC) and NIH grant R35GM119617 (to DEC). The confocal microscope imaging was performed at the VCU Nanomaterials Characterization Core (NCC) Facility.

1. Obtain Nesprin-2G Sensor DNA and Other Plasmid DNA
<ol>
	<li>Obtain Nesprin-2G TS (tension sensor), Nesprin-2G HL (headless) control, mTFP1, venus, and TSmod from a commercial source. Propagate all the DNA plasmids and purify them using standard E. coli strains, such as DH5-&#945;, as described previously12,13.</li>
</ol>
2. Transfect Cells with Nesprin-2G and Other Plasmid DNA
<ol>
	<li>Grow NIH 3T3 fibroblasts cells to 70...

<ol>
	<li>Conway, D. E., Schwartz, M. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Flow-dependent+cellular+mechanotransduction+in+atherosclerosis.">Flow-dependent cellular mechanotransduction in atherosclerosis.</a> J Cell Sci. 126, 5101-5109 (2013).</li><li>Arsenovic, P. T., Ramachandran, I., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Nesprin-2G,+a+Component+of+the+Nuclear+LINC+Complex,+Is+Subject+to+Myosin-Dependent+Tension.">Nesprin-2G, a Component of the Nuclear LINC Complex, Is Subject to Myosin-Dependent Tension.</a> Biophys J. 110 (1), 34-43 (2016).</li><li>Grashoff, C., Hoffman, B. D., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Measuring+mechanical+tension+across+vinculin+reveals+regulation+of+focal+adhesion+dynamics.">Measuring mechanical tension across vinculin reveals regulation of focal adhesion dynamics.</a> Nature. 466 (7303), 263-266 (2010).</li><li>Austen, K., Ringer, P., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Extracellular+rigidity+sensing+by+talin+isoform-specific+mechanical+linkages.">Extracellular rigidity sensing by talin isoform-specific mechanical linkages.</a> Nat Cell Bio. 17 (12), 1597-1606 (2015).</li><li>Meng, F., Sachs, F. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Visualizing+dynamic+cytoplasmic+forces+with+a+compliance-matched+FRET+sensor.">Visualizing dynamic cytoplasmic forces with a compliance-matched FRET sensor.</a> J Cell Sci. 124, 261-269 (2011).</li><li>Borghi, N., Sorokina, M., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=E-cadherin+is+under+constitutive+actomyosin-generated+tension+that+is+increased+at+cell-cell+contacts+upon+externally+applied+stretch.">E-cadherin is under constitutive actomyosin-generated tension that is increased at cell-cell contacts upon externally applied stretch.</a> Proc. Natl. Acad. Sci. U.S.A. 109 (31), 12568-12573 (2012).</li><li>Cai, D., Chen, S. -. C., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Mechanical+Feedback+through+E-Cadherin+Promotes+Direction+Sensing+during+Collective+Cell+Migration.">Mechanical Feedback through E-Cadherin Promotes Direction Sensing during Collective Cell Migration.</a> Cell. 157 (5), 1146-1159 (2014).</li><li>Conway, D. E., Breckenridge, M. T., Hinde, E., Gratton, E., Chen, C. S., Schwartz, M. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Fluid+Shear+Stress+on+Endothelial+Cells+Modulates+Mechanical+Tension+across+VE-Cadherin+and+PECAM-1.">Fluid Shear Stress on Endothelial Cells Modulates Mechanical Tension across VE-Cadherin and PECAM-1.</a> Curr Bio CB. 23 (11), 1024-1030 (2013).</li><li>Brenner, M. D., Zhou, R., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Spider+Silk+Peptide+Is+a+Compact,+Linear+Nanospring+Ideal+for+Intracellular+Tension+Sensing.">Spider Silk Peptide Is a Compact, Linear Nanospring Ideal for Intracellular Tension Sensing.</a> Nano Lett. 16 (3), 2096-2102 (2016).</li><li>Rothenberg, K. E., Neibart, S. S., LaCroix, A. S., Hoffman, B. D. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Controlling+Cell+Geometry+Affects+the+Spatial+Distribution+of+Load+Across+Vinculin.">Controlling Cell Geometry Affects the Spatial Distribution of Load Across Vinculin.</a> Cell Mol Bioeng. 8 (3), 364-382 (2015).</li><li>Ostlund, C., Folker, E. S., Choi, J. C., Gomes, E. R., Gundersen, G. G., Worman, H. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Dynamics+and+molecular+interactions+of+linker+of+nucleoskeleton+and+cytoskeleton+(LINC)+complex+proteins.">Dynamics and molecular interactions of linker of nucleoskeleton and cytoskeleton (LINC) complex proteins.</a> J Cell Sci. 122, 4099-4108 (2009).</li><li>Froger, A., Hall, J. E. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Transformation+of+plasmid+DNA+into+E.+coli+using+the+heat+shock+method.">Transformation of plasmid DNA into E. coli using the heat shock method.</a> J Vis Exp. (6), e253 (2007).</li><li>Zhang, S., Cahalan, M. D. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Purifying+plasmid+DNA+from+bacterial+colonies+using+the+QIAGEN+Miniprep+Kit.">Purifying plasmid DNA from bacterial colonies using the QIAGEN Miniprep Kit.</a> J Vis Exp. (6), e247 (2007).</li><li>Rodighiero, S., Bazzini, C., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Fixation,+mounting+and+sealing+with+nail+polish+of+cell+specimens+lead+to+incorrect+FRET+measurements+using+acceptor+photobleaching.">Fixation, mounting and sealing with nail polish of cell specimens lead to incorrect FRET measurements using acceptor photobleaching.</a> Cell. Physiol. Biochem. 21 (5-6), 489-498 (2008).</li><li>Kardash, E., Bandemer, J., Raz, E. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Imaging+protein+activity+in+live+embryos+using+fluorescence+resonance+energy+transfer+biosensors.">Imaging protein activity in live embryos using fluorescence resonance energy transfer biosensors.</a> Nat Protoc. 6 (12), 1835-1846 (2011).</li><li>Vaziri, A., Mofrad, M. R. K. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Mechanics+and+deformation+of+the+nucleus+in+micropipette+aspiration+experiment.">Mechanics and deformation of the nucleus in micropipette aspiration experiment.</a> J Biomech. 40 (9), 2053-2062 (2007).</li><li>Wang, N., Naruse, K., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Mechanical+behavior+in+living+cells+consistent+with+the+tensegrity+model.">Mechanical behavior in living cells consistent with the tensegrity model.</a> Proc. Natl. Acad. Sci. U.S.A. 98 (14), 7765-7770 (2001).</li><li>Nagayama, K., Yahiro, Y., Matsumoto, T. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Stress+fibers+stabilize+the+position+of+intranuclear+DNA+through+mechanical+connection+with+the+nucleus+in+vascular+smooth+muscle+cells.">Stress fibers stabilize the position of intranuclear DNA through mechanical connection with the nucleus in vascular smooth muscle cells.</a> FEBS letters. 585 (24), 3992-3997 (2011).</li><li>Luxton, G. W. G., Gomes, E. R., Folker, E. S., Vintinner, E., Gundersen, G. G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Linear+arrays+of+nuclear+envelope+proteins+harness+retrograde+actin+flow+for+nuclear+movement.">Linear arrays of nuclear envelope proteins harness retrograde actin flow for nuclear movement.</a> Science. 329 (5994), 956-959 (2010).</li><li>Chen, Y., Mauldin, J. P., Day, R. N., Periasamy, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Characterization+of+spectral+FRET+imaging+microscopy+for+monitoring+nuclear+protein+interactions.">Characterization of spectral FRET imaging microscopy for monitoring nuclear protein interactions.</a> J Microsc. 228, 139-152 (2007).</li><li>Ran, F. A., Hsu, P. D., Wright, J., Agarwala, V., Scott, D. A., Zhang, F. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Genome+engineering+using+the+CRISPR-Cas9+system.">Genome engineering using the CRISPR-Cas9 system.</a> Nat Protoc. 8 (11), 2281-2308 (2013).</li><li>LaCroix, A. S., Rothenberg, K. E., Berginski, M. E., Urs, A. N., Hoffman, B. D. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Construction,+imaging,+and+analysis+of+FRET-based+tension+sensors+in+living+cells.">Construction, imaging, and analysis of FRET-based tension sensors in living cells.</a> Methods Cell Biol. , (2015).</li></ol>

A method and demonstration of live cell imaging of mechanical tension across Nesprin-2G, a protein in the nuclear LINC complex, was outlined above. Prior to this work, various techniques, such as micropipette aspiration, magnetic-bead cytometry, and microscopic laser-ablation, have been used to apply strain on the cell nucleus and to measure its bulk material properties16,17,18. However, until our recent work, no stud...

Force-sensitive, genetically encoded FRET sensors have recently emerged as an important tool for measuring tensile-based forces in live cells, providing insight into how mechanical forces are applied across proteins1,2,3,4. With these tools, researchers can non-invasively image intracellular forces in living cells using conventional fluorescent microscopes. These sensors consist of a FRET-pair (donor and acceptor fluorescent proteins, most frequently a blue donor and yellow acceptor) separated by an elastic peptide3. In contrast to C- or N-terminal tagging, this sensor is inserted into an internal site of a protein to measure the mechanical force transmitted across the protein, behaving as a molecular strain gauge. Increased mechanical tension across the sensor results in an increased distance between the FRET-pair, resulting in decreased FRET3. As a result, the FRET is inversely related to tensile force.
These fluorescent-based sensors have been developed for focal adhesion proteins (vinculin3 and talin4), cytoskeletal proteins (&#945;-actinin5), and cell-cell junction proteins (E-Cadherin6,7, VE-Cadherin8, and PECAM8). The most frequently used and well-characterized elastic linker in these biosensors is known as TSmod and consists of a repetitive sequence of 40 amino acids, (GPGGA)8, which was derived from the spider silk protein flagelliform. TSmod has been shown to behave as a linear elastic nano-spring, with FRET responsiveness to 1 to 5 pN of tensile force3. Different lengths of flagelliform can be used to alter the dynamic range of TSmod FRET-force sensitivity9. In addition to flagelliform, spectrin repeats5 and villin headpiece peptide (known as HP35)4 have been used as the elastic peptides between FRET-pairs in similar force biosensors4. Finally, a recent report showed that TSmod can also be used to detect compressive forces10.
We recently developed a force sensor for the linker of the nucleo-cytoskeleton (LINC) complex protein Nesprin-2G by using TSmod inserted into a previously developed truncated Nesprin-2G protein known as mini-Nesprin2G (Figure 2C), which behaves similarly to endogenous Nesprin-2G11. The LINC complex contains multiple proteins that lead from the outside to the inside of the nucleus, linking the cytoplasmic cytoskeleton to the nuclear lamina. Nesprin-2G is a structural protein binding to both the actin cytoskeleton in the cytoplasm and to SUN proteins in the perinuclear space. Using our biosensor, we were able to show that Nesprin-2G is subject to actomyosin-dependent tension in NIH3T3 fibroblasts2. This was the first time that force was directly measured across a protein in the nuclear LINC complex, and it is likely to become an important tool to understand the role of force on the nucleus in mechanobiology.
The protocol below provides a detailed methodology of how to use the Nesprin-2G force sensor, including the expression of the Nesprin tension sensor (Nesprin-TS) in mammalian cells, as well as the acquisition and analysis of FRET images of cells expressing Nesprin-TS. Using an inverted confocal microscope equipped with a spectral detector, a description of how to measure sensitized emission FRET using spectral unmixing and ratiometric FRET imaging is provided. The output ratiometric images can be used to make relative quantitative force comparisons. While this protocol is focused on the expression of Nesprin-TS in fibroblasts, it is easily adaptable to other mammalian cells, including both cell lines and primary cells. Furthermore, this protocol as it relates to image acquisition and FRET analysis can readily be adapted to other FRET-based force biosensors that have been developed for other proteins.

<table border="0" cellpadding="0" cellspacing="0" width="1183">
	<tbody>
		<tr height="21">
			<td height="21" style="height:21px;width:483px;">Nesprin-TS DNA</td>
			<td style="width:108px;">Addgene</td>
			<td style="width:119px;">68127</td>
			<td style="width:475px;">Retrieve from https://www.addgene.org/68127/</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:483px;">Nesprin-HL DNA</td>
			<td style="width:108px;">Addgene</td>
			<td style="width:119px;">68128</td>
			<td>Retrieve from https://www.addgene.org/68128/</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:483px;">mTFP1 DNA</td>
			<td style="width:108px;">Addgene</td>
			<td style="width:119px;">54613</td>
			<td>Retrieve from https://www.addgene.org/54613/</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:483px;">mVenus DNA</td>
			<td style="width:108px;">Addgene</td>
			<td style="width:119px;">27793</td>
			<td>Retrieve from https://www.addgene.org/27793/</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:483px;">TSmod DNA</td>
			<td style="width:108px;">Addgene</td>
			<td style="width:119px;">26021</td>
			<td>Retrieve from https://www.addgene.org/26021/</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:483px;">Competent Cells</td>
			<td style="width:108px;">Bioline</td>
			<td style="width:119px;">BIO-85026</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:483px;">Liquid LB Media</td>
			<td style="width:108px;">ThermoFisher</td>
			<td align="right" style="width:119px;">10855001</td>
			<td>https://www.thermofisher.com/order/catalog/product/10855001</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:483px;">Solid LB Bacterial Culture Plates</td>
			<td style="width:108px;">Sigma-Aldrich</td>
			<td style="width:119px;">L5667</td>
			<td>http://www.sigmaaldrich.com/catalog/product/sigma/l5667?lang=en&#38;region=US</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:483px;">Ampicillin</td>
			<td style="width:108px;">Sigma</td>
			<td style="width:119px;">A9518</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:483px;">Spectrophotometer</td>
			<td style="width:108px;">Biorad</td>
			<td style="width:119px;">273 BR 07335</td>
			<td>SmartSpec Plus</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:483px;">quartz cuvette</td>
			<td style="width:108px;">Biorad</td>
			<td align="right" style="width:119px;">1702504</td>
			<td>Cuvette for SmartSpec Plus</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:483px;">&#160;DNA isolation kit</td>
			<td style="width:108px;">Macherey-Nagel</td>
			<td align="right" style="width:119px;">740412.5</td>
			<td>NucleoBond Xtra Midi Plus</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:483px;">6-well cell culture dish</td>
			<td style="width:108px;">Falcon-Corning</td>
			<td align="right" style="width:119px;">353046</td>
			<td>Multiwell 6-well Polystrene Culture Dish</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:483px;">Dulbecco&#39;s Modified Eagle Medium, (DMEM) cell media</td>
			<td style="width:108px;">Gibco</td>
			<td style="width:119px;">11995-065</td>
			<td>DMEM(1x)</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:483px;">&#160;Bovine Serum</td>
			<td>Life Technologies</td>
			<td>16170-078</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:483px;">reduced serum cell media</td>
			<td style="width:108px;">Gibco</td>
			<td style="width:119px;">31985-070</td>
			<td>Reduced Serum Medium, &#34;optimem&#34;</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:483px;">Lipid Carrier Solution</td>
			<td style="width:108px;">invitrogen</td>
			<td style="width:119px;">11668-019</td>
			<td>Lipid Reagent, &#34;Lipofectamine 2000&#34;</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:483px;">1.5mL sterile plastic tube</td>
			<td style="width:108px;">Denville</td>
			<td style="width:119px;">c2170</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:483px;">Trypsin</td>
			<td style="width:108px;">Gibco</td>
			<td style="width:119px;">25200-056</td>
			<td>0.25% Trypsin-EDTA (1x)</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:483px;">glass-bottom microscope viewing dish</td>
			<td style="width:108px;">In Vitro Scientific</td>
			<td style="width:119px;">D35-20-1.5-N</td>
			<td>35mm Dish with 20mm Bottom Well #1.5 glass</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:483px;">Fibronectin</td>
			<td style="width:108px;">ThermoFisher</td>
			<td align="right" style="width:119px;">33016015</td>
			<td>fibronectin human protein,plasma</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:483px;">Phosphate Buffered Saline (PBS)</td>
			<td style="width:108px;">Gibco</td>
			<td style="width:119px;">14190-144</td>
			<td>Dulbecco&#39;s Phosphate Buffered Saline</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:483px;">15mL sterile centrifuge tube</td>
			<td style="width:108px;">Greiner bio-one</td>
			<td align="right" style="width:119px;">188261</td>
			<td></td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:483px;">swinging rotor centrifuge&#160;</td>
			<td style="width:108px;">Thermo electron</td>
			<td style="width:119px;">Centra CL2</td>
			<td>Swinging rotor thermo electron 236</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:483px;">cell culture biosafety hood</td>
			<td style="width:108px;">Forma Scientific</td>
			<td align="right" style="width:119px;">1284</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:483px;">&#160;climate controlled cell culture incubator</td>
			<td style="width:108px;">ThermoFisher</td>
			<td align="right" style="width:119px;">3596</td>
			<td></td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:483px;">inverted LED widefield fluorescent microscope</td>
			<td style="width:108px;">Life technologies</td>
			<td style="width:119px;">EVOS FL</td>
			<td></td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:483px;">Clear HEPES buffered imaging media</td>
			<td style="width:108px;">Molecular Probes</td>
			<td style="width:119px;">A14291DJ</td>
			<td></td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:483px;">Fetal bovine Serum</td>
			<td style="width:108px;">Life technologies</td>
			<td style="width:119px;">10437-028</td>
			<td></td>
		</tr>
		<tr height="63">
			<td height="63" style="height:63px;width:483px;">Temperature Controlled-Inverted confocal w/458 and 515nm laser sources&#160;</td>
			<td style="width:108px;">Zeiss</td>
			<td style="width:119px;">&#160;LSM 710-w/spectral META detector</td>
			<td></td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:483px;">Outgrowth Media</td>
			<td style="width:108px;">Newengland Biolabs</td>
			<td style="width:119px;">B9020s</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:483px;">NIH 3T3 Fibroblasts</td>
			<td style="width:108px;">ATCC</td>
			<td style="width:119px;">CRL-1658</td>
			<td></td>
		</tr>
	</tbody>
</table>

a protocol for using f&#246;rster resonance energy transfer (fret)-force biosensors to measure mechanical forces across the nuclear linc complex

The LINC complex has been hypothesized to be the critical structure that mediates the transfer of mechanical forces from the cytoskeleton to the nucleus. Nesprin-2G is a key component of the LINC complex that connects the actin cytoskeleton to membrane proteins (SUN domain proteins) in the perinuclear space. These membrane proteins connect to lamins inside the nucleus. Recently, a F&#246;rster Resonance Energy Transfer (FRET)-force probe was cloned into mini-Nesprin-2G (Nesprin-TS (tension sensor)) and used to measure tension across Nesprin-2G in live NIH3T3 fibroblasts. This paper describes the process of using Nesprin-TS to measure LINC complex forces in NIH3T3 fibroblasts. To extract FRET information from Nesprin-TS, an outline of how to spectrally unmix raw spectral images into acceptor and donor fluorescent channels is also presented. Using open-source software (ImageJ), images are pre-processed and transformed into ratiometric images. Finally, FRET data of Nesprin-TS is presented, along with strategies for how to compare data across different experimental groups.

Following the protocol above, plasmid DNA was acquired from the DNA repository and transformed into E. coli cells. E. coli expressing the sensor DNA were selected from LB/Ampicillin plates and amplified in a liquid LB broth. Following the amplification of the vectors, DNA plasmids were purified into TRIS-EDTA buffer using a standard, commercially available DNA isolation kit. Using a spectrophotometer, purified DNA was quantified into a standard concentration of &#181;g/m...

Watch this Scientific Journal Video about A Protocol for Using FÃ¶rster Resonance Energy Transfer FRET-force Biosensors to Measure Mechanical Forces across the Nuclear LINC Complex at JoVE.com

A Protocol for Using F&amp;#246;rster Resonance Energy Transfer (FRET)-force Biosensors to Measure Mechanical Forces across the Nuclear LINC Complex

A number of FRET-based force biosensors have recently been developed, enabling the protein-specific resolution of intracellular force. In this protocol, we demonstrate how one of these sensors, designed for the linker of the nucleoskeleton-cytoskeleton (LINC) complex protein Nesprin-2G can be used to measure actomyosin forces on the nuclear LINC complex.

A Protocol for Using F&#246;rster Resonance Energy Transfer (FRET)-force Biosensors to Measure Mechanical Forces across the Nuclear LINC Complex

The LINC complex has been hypothesized to be the critical structure that mediates the transfer of mechanical forces from the cytoskeleton to the nucleus. ...

The overall goal of this procedure is to determine forces on the linker of the nucleoskeleton cytoskeleton, or LINC complex, through FRET microscopy in living cells via a biosensor designed for the LINC complex protein, nesprin-2G. This method can help answer keys questions in the field of mechanotransduction, such as the forces placed on proteins in the nucleus of living cells, and how these forces change under variant conditions. The main advantage of this technique is its ability to measure very small levels of force on proteins and living cells.Generally, individuals new to this method will struggle with capturing images. Optimizing the microscope laser power and gain to receive a good signal between all experimental groups is difficult. To begin, grow NIH 3T3 fiber blast cells to between 70%and 90%confluence in a six-well cell culture dish in a standard cell culture incubator with temperature and CO2 regulation.In a cell culture hood, remove the medium and rinse each well with approximately 1 milliliter of a reduced serum cell medium. Add 800 microliters of reduced serum cell medium to each well, and place the six-well chamber in the incubator. Then, pipette 700 microliters of reduced serum cell medium into a 1.5 milliliter tube labeled L with 35 microliters of lipid carrier solution to form the lipo mix.Mix the suspension by pipetting. Next, pipette 100 microliters of the reduced serum cell medium into each of six 1.5 milliliter tubes labeled one through six. Pipette the plasma DNA for nesprin tension sensor, nesprin headless zero force control, mTFP1, and venus into tubes one through six, as described in the text protocol.Do not reuse pipette tips when pipetting different types of DNA. Then, pipette 100 microliters of the lipo mix from the L tube into each labeled tube, and mix by repeated pipetting, using a clean pipette for each tube. Incubate the suspension for 10 to 20 minutes.Next, add 200 microliters from each labeled tube to a well of the prepared six-well chamber containing cells. Label the top of each well with the corresponding DNA added. Then, place the six-well chamber in an incubator for four to six hours.Following incubation, aspirate the medium, and add one to two milliliters of reduced serum cell medium to rinse. Aspirate the reduced serum cell medium, and add two milliliters of trypsin to each well before placing the six-well dish in the incubator for five to 15 minutes. While the cells detach in the incubator, coat six glass-bottom viewing dishes with a layer of fibronectin at a concentration of 20 micrograms per milliliter dissolved in phosphate-buffered saline.Allow the dishes to coat the surface in the cell culture hood. Neutralize the trypsin by adding two milliliters of DMEM once the cells are detached. Then, transfer the contents of each well to a labeled 15 milliliter centrifuge tube and spin down at 90 times g for five minutes in a swinging rotor centrifuge.Aspirate the supernatant and re-suspend each cell pellet in 1, 000 microliters of DMEM using a pipette. Aspirate the fibronectin mixture from the glass dishes and pipette 1, 000 microliters of each cell suspension onto the dishes. After the cells settle to the bottom of the glass dishes, add another one milliliter of media to each well.Allow the cells to attach and express sensor in the cell incubator for at least 18 to 24 hours. To verify the transfection efficiency, use a fluorescent microscope equipped with an excitation frequency near 462 nanometers for mTFP1, or 525 nanometers for venus. Use an emission filter centered near 492 nanometers for mTFP1, or 525 nanometers for venus.Roughly 18 to 24 hours after completing the transfection, use an inverted fluorescent microscope to examine the efficiency of transfection by comparing the number of fluorescent cells to the total number of cells in view. If live cells cannot be imaged within 48 hours after transfection, fix the cells in 4%paraformaldehyde for five minutes. Allow cells to express sensor for 24 to 48 hours before fixation.Store the cells in PBS and view after 48 hours. In a cell culture hood, replace the cell medium with imaging medium supplemented with 10%fetal bovine serum. Place the viewing dishes in a temperature controlled confocal microscope stage.Place the glass viewing dish with mTFP1 transfected cells over the oil objective at 60X magnification with a numerical aperture of 1.4. Locate mTFP1-expressing cells in widefield fluorescent mode. With a fluorescent cell in the field of view, select the spectral detection mode and capture the spectral image.Include all frequencies beyond 458 nanometers using 10 nanometer increments. Select a bright fluorescent region on the cell. Add the fluorescent ROI mean as the normalized intensity to the spectral database by clicking Save Spectra to Database.Optimize the laser power and gain such that a good signal to noise ratio is achieved. Settings will vary for different equipment. Repeat the process for venus-expressing cells and remain in spectral mode.Use an excitation frequency of 488 nanometers instead of 458 nanometers. Adjust the power settings as needed, but do not change the emission frequencies. Select a bright fluorescent ROI of around a 20-pixel radius.Add the fluorescent ROI mean as the normalized intensity to the spectral database, by clicking Save Spectra to Database. To capture the unmixed images, first switch the capturing mode to spectral unmixing. Add the spectral fingerprints of venus and mTFP1 to the unmixing channels.Set the excitation laser back to a 458 nanometer argon source. Place the nesprin tension sensor viewing dish above the 60X oil objective. After focusing on a fluorescent cell with sufficiently bright expression, adjust the gain and laser power to optimize the signal to noise ratio.Capture a minimum of 15 to 20 images of nesprin tension sensor cells with relatively similar brightness and avoid excessive pixel saturation. Repeat the image capturing process with nesprin headless cells using identical imaging parameters. A representative 10X magnified image of 3T3 fibroblasts transfected with nesprin tension sensor using a lipid mediated carrier is shown here.Typically, only a fraction of cells are transfected in a given field of view. Shown here is a representative pair of two 3T3 nuclei expressing nesprin-TS in the spectrally unmixed venus and mTFP channels. A merged color image of the two channels is shown in the far right panel.Here is a representative sampling of nesprin-TS masked nuclei from stable expressing MDCK cells on patterned and unpatterned substrates. Ratio images are defined as the ratio of the venus channel divided by the mTFP channel and can be used to make relative quantitative force comparisons. Once mastered, this technique can be done in about eight hours if it's performed properly.While attempting this procedure, it's important to remember to carefully label DNA tubes during the transfection, and keep the imaging parameters constant while capturing spectrally result images. After watching this video, you should have a good understanding of how to transfect cells with the nesprin tension sensor and capture spectrally resolved images to computer FRET index that correlates with force on the tension sensor. Though in this case, a FRET sensor is used for nesprin, it can also be applied to other proteins in the cell where measuring force is desired.

a-protocol-for-using-forster-resonance-energy-transfer-fret-force

Research

JoVE Journal

Bioengineering

Attaching Biological Probes to Silica Optical Biosensors Using Silane Coupling Agents

In order to interface with biological environments, biosensor platforms, such as the popular Biacore system (based on the Surface Plasmon Resonance (SPR) technique), make use of various surface modification techniques, that can, for example, prevent surface fouling, tune the hydrophobicity / hydrophilicity of the surface, adapt to a variety of electronic environments, and most frequently, induce specificity towards a target of interest.1-5 These techniques extend the functionality of otherwise highly sensitive biosensors to real-world applications in complex environments, such as blood, urine, and wastewater analysis.2,6-7 While commercial biosensing platforms, such as Biacore, have well-understood, standard techniques for performing such surface modifications, these techniques have not been translated in a standardized fashion to other label-free biosensing platforms, such as Whispering Gallery Mode (WGM) optical resonators.8-9
WGM optical resonators represent a promising technology for performing label-free detection of a wide variety of species at ultra-low concentrations.6,10-12 The high sensitivity of these platforms is a result of their unique geometric optics: WGM optical resonators confine circulating light at specific, integral resonance frequencies.13 Like the SPR platforms, the optical field is not totally confined to the sensor device, but evanesces; this "evanescent tail" can then interact with species in the surrounding environment. This interaction causes the effective refractive index of the optical field to change, resulting in a slight, but detectable, shift in the resonance frequency of the device. Because the optical field circulates, it can interact many times with the environment, resulting in an inherent amplification of the signal, and very high sensitivities to minor changes in the environment.2,14-15
To perform targeted detection in complex environments, these platforms must be paired with a probe molecule (usually one half of a binding pair, e.g. antibodies / antigens) through surface modification.2 Although WGM optical resonators can be fabricated in several geometries from a variety of material systems, the silica microsphere is the most common. These microspheres are generally fabricated on the end of an optical fiber, which provides a "stem" by which the microspheres can be handled during functionalization and detection experiments. Silica surface chemistries may be applied to attach probe molecules to their surfaces; however, traditional techniques generated for planar substrates are often not adequate for these three-dimensional structures, as any changes to the surface of the microspheres (dust, contamination, surface defects, and uneven coatings) can have severe, negative consequences on their detection capabilities. Here, we demonstrate a facile approach for the surface functionalization of silica microsphere WGM optical resonators using silane coupling agents to bridge the inorganic surface and the biological environment, by attaching biotin to the silica surface.8,16 Although we use silica microsphere WGM resonators as the sensor system in this report, the protocols are general and can be used to functionalize the surface of any silica device with biotin.

Biosensors interface with complex, biological environments and perform targeted detection by combining highly sensitive sensors with highly specific probes attached to the sensor via surface modification. Here, we demonstrate the surface functionalization of silica optical sensors with biotin using silane coupling agents to bridge the sensor and the biological environment.

In order to interface with biological environments, biosensor platforms, such as the popular Biacore system (based on the Surface Plasmon Resonance (SPR) ...

Small and Wide Angle X-Ray Scattering Studies of Biological Macromolecules in Solution

In this paper, Small and Wide Angle X-ray Scattering (SWAXS) analysis of macromolecules is demonstrated through experimentation. SWAXS is a technique where X-rays are elastically scattered by an inhomogeneous sample in the nm-range at small angles (typically 0.1 - 5&deg;) and wide angles (typically &gt; 5&deg;). This technique provides information about the shape, size, and distribution of macromolecules, characteristic distances of partially ordered materials, pore sizes, and surface-to-volume ratio. Small Angle X-ray Scattering (SAXS) is capable of delivering structural information of macromolecules between 1 and 200 nm, whereas Wide Angle X-ray Scattering (WAXS) can resolve even smaller Bragg spacing of samples between 0.33 nm and 0.49 nm based on the specific system setup and detector. The spacing is determined from Bragg's law and is dependent on the wavelength and incident angle.
In a SWAXS experiment, the materials can be solid or liquid and may contain solid, liquid or gaseous domains (so-called particles) of the same or another material in any combination. SWAXS applications are very broad and include colloids of all types: metals, composites, cement, oil, polymers, plastics, proteins, foods, and pharmaceuticals. For solid samples, the thickness is limited to approximately 5 mm.
Usage of a lab-based SWAXS instrument is detailed in this paper. With the available software (e.g., GNOM-ATSAS 2.3 package by D. Svergun EMBL-Hamburg and EasySWAXS software) for the SWAXS system, an experiment can be conducted to determine certain parameters of interest for the given sample. One example of a biological macromolecule experiment is the analysis of 2 wt% lysozyme in a water-based aqueous buffer which can be chosen and prepared through numerous methods. The preparation of the sample follows the guidelines below in the Preparation of the Sample section. Through SWAXS experimentation, important structural parameters of lysozyme, e.g. the radius of gyration, can be analyzed.

The demonstration of the small and wide angle X-ray scattering (SWAXS) procedure has become instrumental in the study of biological macromolecules. Through the use of the instrumentation and procedures of specific angle methods and preparation, the experimental data from the SWAXS displays the atomic and nano-scale characterization of macromolecules.

In this paper, Small and Wide Angle X-ray Scattering (SWAXS) analysis of macromolecules is demonstrated through experimentation. SWAXS is a technique ...

Quantitative FRET (F&#246;rster Resonance Energy Transfer) Analysis for SENP1 Protease Kinetics Determination

Reversible posttranslational modifications of proteins with ubiquitin or ubiquitin-like proteins (Ubls) are widely used to dynamically regulate protein activity and have diverse roles in many biological processes. For example, SUMO covalently modifies a large number or proteins with important roles in many cellular processes, including cell-cycle regulation, cell survival and death, DNA damage response, and stress response 1-5. SENP, as SUMO-specific protease, functions as an endopeptidase in the maturation of SUMO precursors or as an isopeptidase to remove SUMO from its target proteins and refresh the SUMOylation cycle 1,3,6,7.
The catalytic efficiency or specificity of an enzyme is best characterized by the ratio of the kinetic constants, kcat/KM. In several studies, the kinetic parameters of SUMO-SENP pairs have been determined by various methods, including polyacrylamide gel-based western-blot, radioactive-labeled substrate, fluorescent compound or protein labeled substrate 8-13. However, the polyacrylamide-gel-based techniques, which used the "native" proteins but are laborious and technically demanding, that do not readily lend themselves to detailed quantitative analysis. The obtained kcat/KM from studies using tetrapeptides or proteins with an ACC (7-amino-4-carbamoylmetylcoumarin) or AMC (7-amino-4-methylcoumarin) fluorophore were either up to two orders of magnitude lower than the natural substrates or cannot clearly differentiate the iso- and endopeptidase activities of SENPs.
Recently, FRET-based protease assays were used to study the deubiquitinating enzymes (DUBs) or SENPs with the FRET pair of cyan fluorescent protein (CFP) and yellow fluorescent protein (YFP) 9,10,14,15. The ratio of acceptor emission to donor emission was used as the quantitative parameter for FRET signal monitor for protease activity determination. However, this method ignored signal cross-contaminations at the acceptor and donor emission wavelengths by acceptor and donor self-fluorescence and thus was not accurate.
We developed a novel highly sensitive and quantitative FRET-based protease assay for determining the kinetic parameters of pre-SUMO1 maturation by SENP1. An engineered FRET pair CyPet and YPet with significantly improved FRET efficiency and fluorescence quantum yield, were used to generate the CyPet-(pre-SUMO1)-YPet substrate 16. We differentiated and quantified absolute fluorescence signals contributed by the donor and acceptor and FRET at the acceptor and emission wavelengths, respectively. The value of kcat/KM was obtained as (3.2 &plusmn; 0.55) x107 M-1s-1 of SENP1 toward pre-SUMO1, which is in agreement with general enzymatic kinetic parameters. Therefore, this methodology is valid and can be used as a general approach to characterize other proteases as well.

Quantitative FRET F&amp;#246;rster Resonance Energy Transfer Analysis for SENP1 Protease Kinetics Determination

A novel method involving quantitative analysis of FRET (F&ouml;rster Resonance Energy Transfer) signals is described for studying enzyme kinetics. KM and kcat were obtained for the hydrolysis of the catalytic domain of SENP1 (SUMO/Sentrin specific protease 1) to pre-SUMO1 (Small Ubiquitin-like MOdifier). The general principles of this quantitative-FRET-based protease kinetic study can be applied to other proteases.

Reversible posttranslational modifications of proteins with ubiquitin or ubiquitin-like proteins (Ubls) are widely used to dynamically regulate protein ...

Design of a Biaxial Mechanical Loading Bioreactor for Tissue Engineering

We designed a loading device that is capable of applying uniaxial or biaxial mechanical strain to a tissue engineered biocomposites fabricated for transplantation. While the device primarily functions as a bioreactor that mimics the native mechanical strains, it is also outfitted with a load cell for providing force feedback or mechanical testing of the constructs. The device subjects engineered cartilage constructs to biaxial mechanical loading with great precision of loading dose (amplitude and frequency) and is compact enough to fit inside a standard tissue culture incubator. It loads samples directly in a tissue culture plate, and multiple plate sizes are compatible with the system. The device has been designed using components manufactured for precision-guided laser applications. Bi-axial loading is accomplished by two orthogonal stages. The stages have a 50 mm travel range and are driven independently by stepper motor actuators, controlled by a closed-loop stepper motor driver that features micro-stepping capabilities, enabling step sizes of less than 50 nm. A polysulfone loading platen is coupled to the bi-axial moving platform. Movements of the stages are controlled by Thor-labs Advanced Positioning Technology (APT) software. The stepper motor driver is used with the software to adjust load parameters of frequency and amplitude of both shear and compression independently and simultaneously. Positional feedback is provided by linear optical encoders that have a bidirectional repeatability of 0.1 &mu;m and a resolution of 20 nm, translating to a positional accuracy of less than 3 &mu;m over the full 50 mm of travel. These encoders provide the necessary position feedback to the drive electronics to ensure true nanopositioning capabilities. In order to provide the force feedback to detect contact and evaluate loading responses, a precision miniature load cell is positioned between the loading platen and the moving platform. The load cell has high accuracies of 0.15% to 0.25% full scale.

We designed a novel mechanical loading bioreactor that can apply uniaxial or biaxial mechanical strain to a cartilage biocomposite prior to transplantation into an articular cartilage defect.

We  designed a loading device that is capable of applying uniaxial or biaxial  mechanical strain to a tissue engineered biocomposites fabricated for  ...

Measuring the Mechanical Properties of Living Cells Using Atomic Force Microscopy

Mechanical properties of cells and extracellular matrix (ECM) play important roles in many biological processes including stem cell differentiation, tumor formation, and wound healing. Changes in stiffness of cells and ECM are often signs of changes in cell physiology or diseases in tissues. Hence, cell stiffness is an index to evaluate the status of cell cultures. Among the multitude of methods applied to measure the stiffness of cells and tissues, micro-indentation using an Atomic Force Microscope (AFM) provides a way to reliably measure the stiffness of living cells. This method has been widely applied to characterize the micro-scale stiffness for a variety of materials ranging from metal surfaces to soft biological tissues and cells. The basic principle of this method is to indent a cell with an AFM tip of selected geometry and measure the applied force from the bending of the AFM cantilever. Fitting the force-indentation curve to the Hertz model for the corresponding tip geometry can give quantitative measurements of material stiffness. This paper demonstrates the procedure to characterize the stiffness of living cells using AFM. Key steps including the process of AFM calibration, force-curve acquisition, and data analysis using a MATLAB routine are demonstrated. Limitations of this method are also discussed.

This paper demonstrates a protocol to characterize the mechanical properties of living cells by means of microindentation using an Atomic Force Microscope (AFM).

Mechanical  properties of cells and extracellular matrix (ECM) play important roles in many  biological processes including stem cell differentiation, ...

Ratiometric Biosensors that Measure Mitochondrial Redox State and ATP in Living Yeast Cells

Mitochondria have roles in many cellular processes, from energy metabolism and calcium homeostasis to control of cellular lifespan and programmed cell death. These processes affect and are affected by the redox status of and ATP production by mitochondria. Here, we describe the use of two ratiometric, genetically encoded biosensors that can detect mitochondrial redox state and ATP levels at subcellular resolution in living yeast cells. Mitochondrial redox state is measured using redox-sensitive Green Fluorescent Protein (roGFP) that is targeted to the mitochondrial matrix. Mito-roGFP contains cysteines at positions 147 and 204 of GFP, which undergo reversible and environment-dependent oxidation and reduction, which in turn alter the excitation spectrum of the protein. MitGO-ATeam is a F&ouml;rster resonance energy transfer (FRET) probe in which the &epsilon; subunit of the FoF1-ATP synthase is sandwiched between FRET donor and acceptor fluorescent proteins. Binding of ATP to the &epsilon; subunit results in conformation changes in the protein that bring the FRET donor and acceptor in close proximity and allow for fluorescence resonance energy transfer from the donor to acceptor.

We describe the use of two ratiometric, genetically encoded biosensors, which are based on GFP, to monitor mitochondrial redox state and ATP levels at subcellular resolution in living yeast cells.

Mitochondria have roles in many cellular processes, from energy metabolism and calcium homeostasis to control of cellular lifespan and programmed cell ...

From Voxels to Knowledge: A Practical Guide to the Segmentation of Complex Electron Microscopy 3D-Data

Modern 3D electron microscopy approaches have recently allowed unprecedented insight into the 3D ultrastructural organization of cells and tissues, enabling the visualization of large macromolecular machines, such as adhesion complexes, as well as higher-order structures, such as the cytoskeleton and cellular organelles in their respective cell and tissue context. Given the inherent complexity of cellular volumes, it is essential to first extract the features of interest in order to allow visualization, quantification, and therefore comprehension of their 3D organization. Each data set is defined by distinct characteristics, e.g., signal-to-noise ratio, crispness (sharpness) of the data, heterogeneity of its features, crowdedness of features, presence or absence of characteristic shapes that allow for easy identification, and the percentage of the entire volume that a specific region of interest occupies. All these characteristics need to be considered when deciding on which approach to take for segmentation.
The six different 3D ultrastructural data sets presented were obtained by three different imaging approaches: resin embedded stained electron tomography, focused ion beam- and serial block face- scanning electron microscopy (FIB-SEM, SBF-SEM) of mildly stained and heavily stained samples, respectively. For these data sets, four different segmentation approaches have been applied: (1) fully manual model building followed solely by visualization of the model, (2) manual tracing segmentation of the data followed by surface rendering, (3) semi-automated approaches followed by surface rendering, or (4) automated custom-designed segmentation algorithms followed by surface rendering and quantitative analysis. Depending on the combination of data set characteristics, it was found that typically one of these four categorical approaches outperforms the others, but depending on the exact sequence of criteria, more than one approach may be successful. Based on these data, we propose a triage scheme that categorizes both objective data set characteristics and subjective personal criteria for the analysis of the different data sets.

The bottleneck for cellular 3D electron microscopy is feature extraction (segmentation) in highly complex 3D density maps. We have developed a set of criteria, which provides guidance regarding which segmentation approach (manual, semi-automated, or automated) is best suited for different data types, thus providing a starting point for effective segmentation.

Modern 3D electron microscopy approaches have recently allowed unprecedented insight into the 3D ultrastructural organization of cells and tissues, ...

Protocol for Biofilm Streamer Formation in a Microfluidic Device with Micro-pillars

Several bacterial species possess the ability to attach to surfaces and colonize them in the form of thin films called biofilms. Biofilms that grow in porous media are relevant to several industrial and environmental processes such as wastewater treatment and CO2 sequestration. We used Pseudomonas fluorescens, a Gram-negative aerobic bacterium, to investigate biofilm formation in a microfluidic device that mimics porous media. The microfluidic device consists of an array of micro-posts, which were fabricated using soft-lithography. Subsequently, biofilm formation in these devices with flow was investigated and we demonstrate the formation of filamentous biofilms known as streamers in our device. The detailed protocols for fabrication and assembly of microfluidic device are provided here along with the bacterial culture protocols. Detailed procedures for experimentation with the microfluidic device are also presented along with representative results.

Protocols for the study of biofilm formation in a microfluidic device that mimics porous media are discussed. The microfluidic device consists of an array of micro-pillars and biofilm formation by Pseudomonas fluorescens in this device is investigated.

Several bacterial species possess the ability to attach to surfaces and colonize them in the form of thin films called biofilms. Biofilms that grow in ...

Luminescence Resonance Energy Transfer to Study Conformational Changes in Membrane Proteins Expressed in Mammalian Cells

Luminescence Resonance Energy Transfer, or LRET, is a powerful technique used to measure distances between two sites in proteins within the distance range of 10-100 &#197;. By measuring the distances under various ligated conditions, conformational changes of the protein can be easily assessed. With LRET, a lanthanide, most often chelated terbium, is used as the donor fluorophore, affording advantages such as a longer donor-only emission lifetime, the flexibility to use multiple acceptor fluorophores, and the opportunity to detect sensitized acceptor emission as an easy way to measure energy transfer without the risk of also detecting donor-only signal. Here, we describe a method to use LRET on membrane proteins expressed and assayed on the surface of intact mammalian cells. We introduce a protease cleavage site between the LRET fluorophore pair. After obtaining the original LRET signal, cleavage at that site removes the specific LRET signal from the protein of interest allowing us to quantitatively subtract the background signal that remains after cleavage. This method allows for more physiologically relevant measurements to be made without the need for purification of protein.

We describe here an improved Luminescence Resonance Energy Transfer (LRET) method where we introduce a protease cleavage site between the donor and acceptor fluorophore sites. This modification allows us to obtain specific LRET signals arising from membrane proteins of interest, allowing for the study of membrane proteins without protein purification.

Luminescence Resonance Energy Transfer, or LRET, is a powerful technique used to measure distances between two sites in proteins within the distance range ...

Fabricating Complex Culture Substrates Using Robotic Microcontact Printing (R-&#181;CP) and Sequential Nucleophilic Substitution

In tissue engineering, it is desirable to exhibit spatial control of tissue morphology and cell fate in culture on the micron scale. Culture substrates presenting grafted poly(ethylene glycol) (PEG) brushes can be used to achieve this task by creating microscale, non-fouling and cell adhesion resistant regions as well as regions where cells participate in biospecific interactions with covalently tethered ligands. To engineer complex tissues using such substrates, it will be necessary to sequentially pattern multiple PEG brushes functionalized to confer differential bioactivities and aligned in microscale orientations that mimic in vivo niches. Microcontact printing (&#956;CP) is a versatile technique to pattern such grafted PEG brushes, but manual &#956;CP cannot be performed with microscale precision. Thus, we combined advanced robotics with soft-lithography techniques and emerging surface chemistry reactions to develop a robotic microcontact printing (R-&#956;CP)-assisted method for fabricating culture substrates with complex, microscale, and highly ordered patterns of PEG brushes presenting orthogonal &#8216;click&#8217; chemistries. Here, we describe in detail the workflow to manufacture such substrates.

Fabricating Complex Culture Substrates Using Robotic Microcontact Printing R- &amp;#181;CP and Sequential Nucleophilic Substitution

Cell culture substrates functionalized with microscale patterns of biological ligands have immense utility in the field of tissue engineering. Here, we demonstrate the versatile and automated manufacture of tissue culture substrates with multiple, micropatterned poly(ethylene glycol) brushes presenting orthogonal chemistries that enable spatially precise and site-specific immobilization of biological ligands.

In tissue engineering, it is desirable to exhibit spatial control of tissue morphology and cell fate in culture on the micron scale. Culture substrates ...