A Guide to Generating and Using hiPSC Derived NPCs for the Study of Neurological Diseases

Summary

This protocol describes how neural progenitor cells can be differentiated from human induced pluripotent stem cells, in order to yield a robust and replicative neural cell population, which may be used to identify the developmental pathways contributing to disease pathogenesis in many neurological disorders.

Abstract

Post-mortem studies of neurological diseases are not ideal for identifying the underlying causes of disease initiation, as many diseases include a long period of disease progression prior to the onset of symptoms. Because fibroblasts from patients and healthy controls can be efficiently reprogrammed into human induced pluripotent stem cells (hiPSCs), and subsequently differentiated into neural progenitor cells (NPCs) and neurons for the study of these diseases, it is now possible to recapitulate the developmental events that occurred prior to symptom onset in patients. We present a method by which to efficiently differentiate hiPSCs into NPCs, which in addition to being capable of further differentiation into functional neurons, can also be robustly passaged, freeze-thawed or transitioned to grow as neurospheres, enabling rapid genetic screening to identify the molecular factors that impact cellular phenotypes including replication, migration, oxidative stress and/or apoptosis. Patient derived hiPSC NPCs are a unique platform, ideally suited for the empirical testing of the cellular or molecular consequences of manipulating gene expression.

Introduction

Gene expression studies of neurons differentiated in vitro from human induced pluripotent stem cells (hiPSCs) by us ¹ and others ^2,3 indicate that hiPSC neurons resemble fetal rather than adult brain tissue. At present, hiPSC-based models may be more appropriate for the study of predisposition to, rather than late features of, neurological disease. We have previously reported that a significant fraction of the gene signature of schizophrenia hiPSC-derived neurons is conserved in schizophrenia hiPSC-derived neural progenitor cells (NPCs), indicating that NPCs may be a useful cell type for studying the molecular pathways contributing to schizophrenia ¹. We and others have reported aberrant migration, increased oxidative stress and reactive oxygen species, sensitivity to sub-threshold environmental stresses and impaired mitochondrial function in schizophrenia hiPSC NPCs ^1,4-6, as well as decreased neuronal connectivity and synaptic function in schizophrenia hiPSC neurons ^5,7-10. If the molecular factors contributing to aberrant migration and/or oxidative stress in schizophrenia hiPSC NPCs also underlie the reduced neuronal connectivity in schizophrenia hiPSC-derived neurons, NPCs could be a robust and highly replicative neural population with which to study the mechanisms responsible for disease. Furthermore, because one can rapidly generate large numbers of cells and need not wait weeks or months for neuronal maturation, NPC-based assays are suitable for the study of larger patient cohorts and are more amenable to high throughput screening. We believe that hiPSC NPCs can serve as a proxy for the developmental pathways potentially contributing to disease pathogenesis, as has already been demonstrated in disorders as diverse as schizophrenia ¹ and Huntington’s disease ¹¹.

To differentiate NPCs from hiPSCs, initial neural induction is accomplished by dual-SMAD inhibition (0.1μM LDN193189 and 10μM SB431542) ¹². By antagonizing BMP and TGFβ signaling with these small molecules, endoderm and mesoderm specification is blocked, accelerating neuronal differentiation and leading to the formation of visible neural rosettes within one week of plating. Neural patterning occurs early in this process, presumably during the period of neural rosette formation and immediately thereafter. In the absence of other cues, these primitive neural cells assume an anterior forebrain-like fate ¹³. Immediately following neural rosette formation, and ongoing throughout NPC expansion, forebrain NPCs are cultured with FGF2 ^8,14. They have dual lineage potential and can be differentiated to neural populations of 70-80% βIII-TUBULIN-positive neurons and 20-30% glial fibrillary acidic protein (GFAP)-positive astrocytes (Figure 1). The majority of forebrain hiPSC neurons are VGLUT1-positive, and so are presumably glutamatergic, although approximately 30% of neurons are GAD67-positive (GABAergic) ⁸.

NPCs are routinely passaged more than ten times in vitro, while maintaining consistent differentiation profiles, and without accumulating karyotype abnormalities. Groups have reported passaging NPCs more than 40 times ¹⁵, however, we find that beyond ten passages, NPCs show increased propensity for astrocyte differentiation. NPCs well-tolerate multiple freeze-thaws and can be transitioned to grow as neurospheres by simply culturing in non-adherent plates. NPCs are efficiently transduced by viral vectors, enabling rapid evaluation of the molecular and cellular consequences of genetic perturbation, and easily expandable to yield sufficient material for biochemical studies. Furthermore, because viral vectors permit robust over-expression and/or knockdown of disease-relevant genes, in either control or patient derived neural cells, one can use this platform to test the effect of genetic background on these manipulations. Though not suitable for synaptic or activity-based assays requiring mature neurons, NPCs may be a practical alternative for many straightforward molecular or biochemical analyses of patient-derived neural cells.

Access restricted. Please log in or start a trial to view this content.

Protocol

1. hiPSC Differentiation to Neural Progenitor Cells

1. Grow and expand hiPSCs in human embryonic stem cell (HES) media (Table 1) co-cultured on a mouse embryonic fibroblast (mEF) feeder layer until large (but subconfluent) colonies are ready for neural differentiation via an embryoid body (EB) intermediate (Figure 2). Routine hiPSC culture conditions are well described elsewhere ^16,17; briefly, grow hiPSCs in HES media on a mEF feeder layer until confluent, then enzymatically passage with collagenase (1mg/ml in DMEM) and expand approximately 1:3 every 7 days.
2. To prepare Poly-L-Ornithine/laminin coated plates, coat plates with 10 μg/ml Poly-L-Ornithine in sterile water for plastic surfaces (50 μg/ml for glass surfaces) and incubate at RT for 3-24 hr. Wash at least once with sterile water and then coat with 5μg/ml Laminin in sterile PBS at RT for 3-24 hr.
   NOTE: If wrapped in plastic, plates can be stored for up to six months at -20 ºC.
3. On Day 1, enzymatically lift subconfluent hiPSCs (generally grown on mEFs, or hiPSCs grown in defined media such as TeSR ¹⁸ on Matrigel) from the plate as large colonies using 1mg/ml Collagenase IV in DMEM/F12.
   NOTE: Following 1-2 hr of incubation at 37 ºC, colonies will be floating in the dish.
4. Gently wash hiPSC colonies (by settling, not centrifugation) 1-2x with DMEM/F12, resuspend in 2ml/well of N2/B27 media (Table 1) and transfer to non-adherent 6-well dishes (combine 3-wells into 1-well) ¹⁹.
   NOTE: Overnight, colonies will form floating spherical clusters termed “embryoid bodies” (EBs). Expect substantial cellular death.
5. On Day 2, tilt plates and allow EBs to settle. Carefully remove media and wash once with DMEM/F12 to remove debris. Feed with N2/B27 media supplemented with dual SMAD inhibitors (0.1 μM LDN193189 and 10 μM SB431542) ¹².
6. On Days 3-7, neuralization will occur in the context of dual SMAD inhibition; check that EBs are round but not cystic. Feed EBs every second day with N2/B27 media supplemented with 0.1 μM LDN193189 and 10 μM SB431542.
7. On Days 7-14, following plating of EBs to Poly-L-Ornithine/Laminin coated plates, check using a brightfield microscope that neural rosettes begin to appear within a few days (characterized as round clusters of neuroepithelial cells with apico-basal polarity; Figure 1). Continue to feed adherent EBs every second day with N2/B27 media supplemented with 0.1 μM LDN193189, 10 μM SB431542 and 1 μg/ml laminin.

2. Harvest of Neural Rosettes

NOTE: We recommend that neural rosettes be enzymatically harvested using Neural Rosette Selection Reagent ²⁰ or similar selection reagent. Though neural rosettes can be manually picked into 6-well Poly-L-Ornithine/Laminin coated plate, this methodology takes extensive training to master, and, dependent on user skill, may require a second round of picking at day 20 to further enrich for NPCs and deplete non-neural cell types.

1. For enzymatic selection of neural rosettes at day 14, aspirate media from adhered EBs and add 1 ml of neural rosette selection reagent per well for a 6-well plate. Incubate at 37 ºC for 1 hr.
2. With a P1000 pipetman, gently remove enzyme from each well. Add 1 ml of DMEM/F12 per well to wash.
3. With a P1000, collect the 1 ml of DMEM/F12 and quickly expel the DMEM/F12 back into the well, thus detaching the rosettes from the plate. Collect the rosettes into a falcon tube.
4. Pipet another 1 ml of DMEM/F12 and quickly expel into the same well to detach remaining rosettes. (Do not triturate. Try not to break up rosette aggregates). Collect the neural rosettes into same falcon tube.
5. Repeat step 2.4 as necessary. If rosettes do not detach readily, add more enzyme and repeat the process (steps 2.1-2.4)
6. Spin cells at 300 x g for 3 min. Aspirate the wash, and re-suspend rosettes in 2 ml of NPC media (Table 1). Transfer cells (1:1) into a Poly-L-Ornithine/Laminin coated 6 well plate.
7. From Days 15-21, the neural rosettes will expand; feed rosettes every second day with NPC media.
8. Evaluate the quality of the neural rosettes and ensure that flat fibroblast-like cells are not expanding within the culture.
   NOTE: If non-rosettes persist, the NPC culture can sometimes be salvaged by manual picking, selecting only the best of the picked rosettes into Accutase. Dissociate 15 min at 37 ºC. Pellet, wash and plate in NPC media onto 24-well Poly-L-Ornithine/Laminin coated plate.

3. Expansion of Neural Progenitor Cells

NOTE: hiPSC NPCs can be grown on either Matrigel- or Poly-L-Ornithine/Laminin coated plates. We typically use Matrigel-plates as they can be prepared more quickly and at lower cost.

1. To prepare Matrigel coated plates, quickly thaw and resuspend a 1mg frozen aliquot of Matrigel in 24 ml cold DMEM/F12 and immediately distribute 2 ml to each well of two six-well plates. Incubate for at least 1 hr at 37 ºC.
   NOTE: Matrigel needs only to be aspirated, not washed, immediately prior to use.
2. Feed NPCs every second day and maintain at very high density or they will spontaneously differentiate to neurons.
   NOTE: Though more established NPCs are typically split 1:4 every week, very low passage NPCs may be split 1:2 as infrequently as once every two weeks.
3. To split, first aspirate media and add 1 ml warm Accutase (1X) per well of 6-well plate. Incubate at 37 ºC for 10-15 min.
4. Gently transfer detached cells into a 15 ml tube containing DMEM/F12 with as little mechanical stress as possible. Do not titrate cells while in enzyme. Pellet cells by spinning at 1,000 x g for 5 min.
5. Aspirate the wash, and re-suspend NPCs in ~1 ml NPC media per original well of 6-well.
   NOTE: Expect that a confluent well of a 6-well dish has 5-10 million cells; this can be confirmed by counting a 10μl aliquot of cells using a hematocytometer prior to re-plating.
6. Following re-suspension, re-plate NPCs as NPCs, neurons or neurospheres. To maintain NPCs, plate approximately 1-2 million cells per well of a 6-well plate. The efficiency of neurosphere formation can vary between experiments and cell lines, but generally occurs best if between 200,000 and 1,000,000 cells are seeded per well of a non-adherent 6-well plate; if clumping of the neurospheres occurs, reduce the number of cells seeded. To differentiate to neurons, plate approximately 200,000 cells per well of a 6-well plate, replacing NPC media with Neuron media.
7. Immunohistochemically validate every established NPC line. Once sufficient cellular material has been expanded, label NPCs with antibodies for NESTIN and SOX2. Validated NPC lines should also be differentiated into neurons for 4-6 weeks, and labeled with antibodies for βIII-TUBULIN and MAP2AB.
   1. Fix cells in 4% paraformaldehyde in PBS at 4°C for 10 min. Permeabilize NPCs at RT for 15 min in 1.0% Triton in PBS, and then block in 5% donkey serum with 0.1% Triton at RT for 30 min.
   2. Incubate with primary antibody in 5% donkey serum with 0.1% Triton, overnight at 4°C.
      NOTE: We recommend the following antibodies: goat anti-Sox2, 1:200; mouse anti-human Nestin, 1:200; rabbit anti-βIII-tubulin, 1:500; mouse anti-βIII-tubulin, 1:500; mouse anti-MAP2AB, 1:200. (Figure 2).
   3. Following a wash with PBS, incubate secondary antibodies cells with the appropriate conjugated secondary antibody to goat, mouse or rabbit at 1:300, in in 5% donkey serum with 0.1% Triton for 1-2 hr at RT. To visualize nuclei, stain cells with 0.5 μg/ml DAPI (4',6-diamidino-2-phenylindole) and then mount with Vectashield.

4. NPC Transduction

1. Use spinfection (centrifugation of cell culture plates in the presence of virus at 1,000 x g for 1 hr) to increase the percentage of transfected cells ²¹. Aspirate media and replace with the relevant overexpression (or control) lentiviruses (or retroviruses), titered to the desired multiplicity of infection (MOI) (typically 1-10), diluted in NPC media. Use 1.5 ml volume per well of a 6-well plate (or an appropriately scaled volume for other types of tissue culture plates). Spin at 1,000 x g and 37 ºC for 1 hr in a plate centrifuge.
   NOTE: Ideally, transduce NPCs with lentiviral or retroviral vectors within 1-2 days of splitting. Whether using commercial or laboratory-prepared viruses, it can be helpful to appropriately titer batches of virus in advance by serial dilution. (Figure 3).
2. To reduce cellular death, replace media within 8 hr of spinfection.
   NOTE: Viral integration and transgene expression should be detectable within 24 hr by reporter gene fluorescence. (If the virus lacks a fluorescent reporter, this is more difficult to assess; successful transfection can best be validated by immunoblot, immunohistochemistry or qPCR for overexpression products.) Full expression may take 3-7 days; repeated spinfections with additional virus may be required to increase the percentage of transfected cells. Recurrent spinfections can occur daily but need not be so frequent. Ideally, if using a fluorescent reporter, >80% of cells should be labeled.

5. Neurosphere Migration Assay

NOTE: Neurospheres form spontaneously, following the enzymatic dissociation of NPCs (by a manner identical to that used in NPC expansion - steps 3.3-3.6), if cells are cultured in suspension in NPC media.

1. Briefly, grow dissociated NPCs in NPC media for 48 hr in nonadherent plates in order to generate neurospheres. (Figure 4).
2. For neurosphere migration, prepare fresh Matrigel plates using cold NPC media, rather than DMEM, in a 96-well plate, 1-2 hr prior to neurosphere picking. Do not aspirate Matrigel from the wells.
3. As originally published for embryonic stem cell-derived neurospheres ²², manually pick NPC-derived neurospheres under a microscope, after washing once in NPC media to remove cellular debris. Transfer one neurosphere to each well of a Matrigel-coated 96-well plate.
4. Add an additional 0.5 mg Matrigel, diluted in cold NPC media, to the neurospheres in each 96-well plate.
5. Manually center each individual neurosphere in the middle of the well using a pipet tip.
   NOTE: It is important to pick neurospheres of similar size, in order to reduce variability in the results.
6. Allow migration to occur for 48 hr and then fix cells with 4% paraformaldehyde and stain with desired immunohistochemical markers.
7. If radial migration is to be determined, photograph neurospheres in their entirely using a 4x microscope objective. Exclude any neurospheres contacting the edge of the well or a second neurosphere from the analysis.
   NOTE: If migration occurs for longer than 48 hr, the resulting radial migration will likely be too large to image using a 4x objective.
8. Measure average migration from each neurosphere using NIH ImageJ software (Figure 5). This can be done using either of the analysis methods described below:
   1. Radial migration:
      1. Manually trace the edge of the furthest migrating cells using the freehand selection tool then use the Measure (Ctrl+M) function to calculate the area of the resulting shape. Before measuring the area make sure that Area is checked in the Set Measurements window found under the Analyze tab. Use the value of the area measurement and the equation for the area of a circle (A=πr²) to determine the radius (outer).
      2. Trace the edge of the original neurosphere, measure the area and calculate the radius (inner) in the same way. Calculate the total radial migration as the difference between the outer and inner radii.
   2. Greatest cellular migration:
      1. Measure the distance moved of the five furthest cells from the edge of the inner neurosphere using the straight-line selection tool followed by the Measure (Ctrl+M) function.

Access restricted. Please log in or start a trial to view this content.

Results

Neural rosettes can be identified morphologically, using a brightfield microscope, by their characteristic appearance as round clusters of neuroepithelial cells with apico-basal polarity (Figure 1). Though NPCs are typically cultured at very high cell density, immediately following passaging, slightly pyramidal-shaped soma and bipolar neurite structure is visible (Figure 1D). Validated NPCs express NESTIN and SOX2 in the majority of cells, though βIII-TUBULIN staining is also visibl...

Access restricted. Please log in or start a trial to view this content.

Discussion

We have described methods by which to differentiate hiPSCs into NPCs, a neural cell type in which a significant fraction of the gene signature of hiPSC-derived neurons is conserved and that may serve as a proxy for the developmental pathways potentially contributing to disease pathogenesis ^8,11. Additionally, as we have detailed, NPCs are a robustly replicative and easily transduced neural population, which we believe may be suitable for molecular and biochemical studies of disease predisposition.

Access restricted. Please log in or start a trial to view this content.

Materials

Name	Company	Catalog Number	Comments
DMEM/F12	Life Technologies	#11330	for HES media
DMEM/F12	Life Technologies	#10565	for neural media
KO-Serum Replacement	Life Technologies	#10828	Needs to be lot tested
Glutamax	Life Technologies	#35050
NEAA	Life Technologies	#11140
N2	Life Technologies	#17502-048	Needs to be lot tested
B27-RA	Life Technologies	#12587-010	Needs to be lot tested
FGF2	Life Technologies	#13256-029	Resuspend in PBS + 1% BSA
LDN193189	Stemgent	#04-0074
SB431542	Stemgent	#04-0010
BDNF	Peprotech	#450-02	Resuspend in PBS + 0.1% BSA
GDNF	Peprotech	#450-10	Resuspend in PBS + 0.1% BSA
Dibutyryl cyclic-AMP	Sigma	#D0627	Resuspend in PBS + 0.1% BSA
L-ascorbic acid	Sigma	#A0278	Resuspend in H20
STEMdiff Neural Rosette Selection Reagent	Stemcell Technologies	#05832
Accutase	Innovative Cell Technologies	AT-104
Collagenase IV	Life Technologies	#17104019
CF1 mEFs	Millipore	#PMEF-CF
Poly-L-Ornithine	Sigma	P3655
Laminin, Natural Mouse 1 mg	Life Technologies	#23017-015
BD Matrigel	BD	#354230	Resuspend on ice in cold DMEM at 10 mg/ml, use 1 mg per two 6-well plate equivalent
Tissue culture treated 6-well plates	Corning	3506
Ultra low attachment 6-well plates	Corning	3471
goat anti-Sox2	Santa Cruz	sc­17320	use at 1:200
mouse anti-human Nestin	Millipore	MAB5326	use at 1:200
rabbit anti-βIII-tubulin	Covance	PRB­435P	use at 1:500
mouse anti-βIII-tubulin	Covance	MMS­435P	use at 1:500
mouse anti-MAP2AB	Sigma	M1406	use at 1:200
Plate centrifuge	Beckman Coulter	Beckman Coulter Allegra X-14 (with SX4750 plate carrier)