Direct Protein Delivery to Mammalian Cells Using Cell-permeable Cys2-His2 Zinc-finger Domains

Summary

Zinc-finger domains are intrinsically cell-permeable and capable of mediating protein delivery into a broad range of mammalian cell types. Here, a detailed step-by-step protocol for implementing zinc-finger technology for intracellular protein delivery is presented.

Abstract

Due to their modularity and ability to be reprogrammed to recognize a wide range of DNA sequences, Cys₂-His₂ zinc-finger DNA-binding domains have emerged as useful tools for targeted genome engineering. Like many other DNA-binding proteins, zinc-fingers also possess the innate ability to cross cell membranes. We recently demonstrated that this intrinsic cell-permeability could be leveraged for intracellular protein delivery. Genetic fusion of zinc-finger motifs leads to efficient transport of protein and enzyme cargo into a broad range of mammalian cell types. Unlike other protein transduction technologies, delivery via zinc-finger domains does not inhibit enzyme activity and leads to high levels of cytosolic delivery. Here a detailed step-by-step protocol is presented for the implementation of zinc-finger technology for protein delivery into mammalian cells. Key steps for achieving high levels of intracellular zinc-finger-mediated delivery are highlighted and strategies for maximizing the performance of this system are discussed.

Introduction

Highly efficient and versatile protein delivery strategies are critical for many basic research and therapeutic applications. The direct delivery of purified proteins into cells represents one of the safest and easiest methods for achieving this.^1,2 Unlike strategies that rely on gene expression from nucleic acids,^3-5 protein delivery poses no risk of insertional mutagenesis, is independent of the cellular transcription/translation machinery and allows for an immediate effect. However, the lack of simple and generalizable methods for endowing cell-penetrating activity onto proteins routinely confounds their direct entry into cells. Current methods for facilitating intracellular protein delivery are based on the use of naturally occurring^6-8 or designed cell-penetrating peptides,^9-12 supercharged transduction domains,^13,14 nanoparticles¹⁵ and liposomes,¹⁶ virus-like particles^17,18 and polymeric microsphere materials.¹⁹ Unfortunately, many of these approaches are hampered by low cellular uptake rates,^20,21 poor stability,²² inadvertent cell-type specificity,²³ low endosomal escape properties²⁴ and toxicity.²⁵ In addition, many protein transduction technologies reduce the bioactivity of the delivered proteins.¹⁴

Our laboratory previously demonstrated that zinc-finger nuclease (ZFN) proteins — chimeric restriction endonucleases consisting of a programmable Cys₂-His₂ zinc-finger DNA-binding protein and the cleavage domain of the FokI restriction endonuclease^26-28 — are inherently cell-permeable.²⁹ This surprising cell-penetrating activity was shown to be an intrinsic property of the custom-designed zinc-finger domain, a DNA-binding platform that has emerged as a powerful tool for targeted genome engineering,^30-32 and considered to be the result of the constellation of six positively charged residues on the protein surface. Indeed, several DNA-binding proteins, including c-Jun and N-DEK have been shown to possess an innate capacity to cross cell membranes.³³ More recently, our laboratory expanded on these results and demonstrated that the cell-penetrating activity of zinc-finger (ZiF) domains could be leveraged for intracellular protein delivery. Genetic fusion of either one- or two-finger ZiF domains to specific protein cargo led to uptake efficiencies that exceeded many conventional cell-penetrating peptide delivery systems.³⁴ Most notably, ZiF-mediated delivery did not compromise the activity of fused enzymatic cargo and facilitated high levels of cytosolic delivery. Collectively, these findings demonstrate the potential of the ZiF domain for facilitating the efficient and facile delivery of proteins, and potentially more diverse types of macromolecules, into cells.

Here, a detailed step-by-step protocol on how to implement ZiF technology for protein delivery in mammalian cells is presented. We previously constructed a suite of one-, two-, three-, four-, five- and six-finger ZiF domains that lack the ability to bind DNA, due to substitution of each of the α-helical DNA-binding residues, but are capable of delivering proteins into cells³⁴ (Figure 1). The production and transduction of Emerald GFP (EmGFP) into HeLa cells using a two-finger ZiF domain is described. This protocol is extensible to almost any protein capable of soluble expression in Escherichia coli and nearly any mammalian cell type. Expected results are provided and strategies for maximizing the performance of this system are also discussed.

Access restricted. Please log in or start a trial to view this content.

Protocol

1. Cloning

1. Obtain alanine-substituted two-finger ZiF domains that have been sub-cloned into the pET-28 expression vector system and are available upon request (pET-2F-ZiF).³⁴
2. PCR amplify EmGFP from the plasmid Emerald-pBAD with the primers 5’ XmaI-EmGFP (5’-GGAAATTGCCCGGGATGGTGAGCAAGGGCGAGGAGCTGTTCAC-3’; XmaI site in bold) and 3’ SacI-EmGFP (5’-CGGATCTGAGCTCTTACTTGTACAGCTCGTCCATGCCGAG-3’; SacI site in bold).
   1. Use 5 ng of template DNA, 10 μl of 10x polymerase buffer, 1 Units (U) of Taq DNA polymerase, 0.2 mM each dNTP and 0.2 μM of each primer in a 100 μl solution with the remaining volume made up of distilled/deionized water. Use the cycling conditions: 95 °C for 5 min; 30 cycles of 95 °C for 30 sec, 55 °C for 30 sec and 72 °C for 1 min; 72 °C for 10 min. Purify the PCR product by gel extraction and determine DNA concentration using a spectrophotometer measuring Abs₂₆₀ x 50 μg/ml.
3. Digest pET-2F-ZiF and the insert encoding EmGFP with the restriction enzymes XmaI and SacI in recommended buffer for 3 hr at 37 °C using 10 U of enzyme per 1 μg of DNA. Visualize DNA by agarose gel electrophoresis using a fluorescent intercalating dye, such as ethidium bromide.
4. Purify the digested DNA by gel extraction kit and determine DNA concentration by a spectrophotometer measuring Abs₂₆₀ x 50 μg/ml.
5. Ligate the purified EmGFP-encoding DNA into 50-100 ng of pET-2F-ZiF using 1 U of T4 DNA Ligase for at least 1 h at RT. For best results, perform the ligation reaction using a 6:1 insert-to-vector molar ratio.
6. Thaw 50 μl of any chemically competent XL-1 Blue Escherichia coli cells on ice and mix gently with 10-20 ng of ligated pET-2F-ZiF-EmGFP.
7. Keep on ice for 30 min. Heat shock the mixture at 42 °C for 90 sec and recover the cells in 2 ml of Super Optimal broth with Catabolite repression (SOC) for 1 hr at 37 °C with shaking.
8. Spread 100 μl of recovery culture on a lysogeny broth (LB) agar plate with 50 μg/ml kanamycin and incubate O/N at 37 °C.
9. The following day, inoculate 6 ml of Super Broth (SB) or LB culture containing 50 μg/ml kanamycin with one colony from the LB agar plate and culture O/N at 37 °C.
   Note: Colony PCR using the primers 5’ XmaI-EmGFP and 3’ SacI-EmGFP could be used to identify positive clones prior to miniprep.
10. Purify pET-2F-ZiF-EmGFP by miniprep and confirm plasmid by DNA sequencing using T7 promoter (5’-TAATACGACTCACTATAGGG-3’).

2. Expression and Purification

1. Thaw 50 μl of chemically competent BL21 E. coli cells on ice and mix gently with 100 ng of pET-2F-ZiF-EmGFP plasmid. Transform as described in steps 1.7-1.8.
2. The following day, inoculate 10 ml of LB medium containing 50 μg/ml kanamycin with a single colony and grow O/N at 37 °C with shaking.
3. The following day, dilute the 10 ml of O/N culture into 1 L of LB medium supplemented with 50 μg/ml kanamycin, 0.2% glucose and 100 μM ZnCl₂. Grow the culture at 37 °C with shaking to an optical density at 600 nm (OD₆₀₀) of 0.8 and induce protein expression with 2 mM isopropyl-β-D-1-thiogalactopyranoside (IPTG). After 6 hr of growth at 37 °C, harvest cells by centrifugation at 5,000 x g for 10 min at 4 °C.
   Note: Induction conditions are highly variable and depend on the stability of the proteins being expressed. Monitor the OD₆₀₀ every 30 min until an OD₆₀₀ of 0.8 is reached.
4. Resuspend the cell pellet in 5 ml of lysis buffer (50 mM Tris-HCl, 500 mM NaCl, 100 μM ZnCl₂, 1 mM dithiothreitol (DTT), 1 mM MgCl₂, 1 mM phenylmethylsulfonyl fluoride (PMSF) and 10 mM imidazole, pH 8.0). Lyse the cells on ice by sonication with the following setting: 50% power output, 4 min process time with 5 sec on/10 sec off intervals. Avoid overheating the solution.
5. Centrifuge the cell lysate at 25,000 x g for 30 min at 4 °C and transfer the supernatant into a fresh collection tube. For best results, perform all the following steps at 4 °C.
6. Run the supernatant through a column pre-packed with 1 ml of equilibrated Ni-NTA slurry. Wash the resin with 20 ml of wash buffer (50 mM Tris-HCl, 500 mM NaCl, 100 μM ZnCl₂, 1 mM DTT, 1 mM MgCl₂ and 30 mM imidazole, pH 8.0).
7. Elute the protein with 5 ml of elution buffer (50 mM Tris-HCl, 500 mM NaCl, 100 μM ZnCl₂, 1 mM DTT, 1 mM MgCl₂, and 300 mM imidazole, pH 8.0).
8. Buffer exchange the eluted protein with storage buffer (50 mM Tris-HCl, 500 mM NaCl, 100 μM ZnCl₂, 1 mM DTT, 1 mM MgCl₂ and 10% glycerol, pH 8.0) and concentrate the protein to at least 40 μM using a spin concentrator by centrifugation according to the manufacturer’s instructions.
9. Determine protein concentration by BCA or Bradford assay. Mix 2 μl of purified proteins with 2 μl 2× SDS-PAGE loading dye, boil at 95 °C for 10 min and then resolve on 4%-20% Tris-Glycine SDS-PAGE to assess protein purity (Figure 2).

3. Protein Storage

1. Aliquot the concentrated protein, flash freeze in liquid nitrogen and store at -80 °C. For EmGFP fusion proteins, cover the tube with aluminum foil in order to protect the protein from light.
2. Avoid repeated freezing and thawing of the protein solution. Note: ZiF-fused proteins are stable under these conditions for at least 1 month. Inappropriate or >4 month storage may lead to protein precipitation or photobleaching of EmGFP.

4. Protein Transduction

1. Maintain HeLa cells in Dulbecco’s modified Eagle’s medium (DMEM) containing 10% (v/v) fetal bovine serum (FBS) and 1% antibiotic-antimycotic at 37 °C in a fully humidified atmosphere with 5% CO₂.
   Note: Cells passaged more than 30 times are not recommended for protein transduction.
2. Pre-coat a 24-well plate with 500 μl of 50 μg/ml of poly-lysine for 30 to 60 min at 25 °C. Seed cells onto a 24-well plate at a density of 2 × 10⁵ cells per well. At 24 hr after seeding, or once cells are between 80%-90% confluent, remove media from each well and wash with 500 μl of pre-warmed serum-free DMEM (SFM).
3. To each well, add 250 μl of SFM containing 2 μM of ZiF-EmGFP protein and 100 μM ZnCl₂. Incubate cells at 37 °C for 1 hr. Note: ZiF domains enter cells primarily through macropinocytosis,³⁴ which is an energy-dependent mechanism. Therefore, cells must be incubated at 37 °C for efficient protein internalization.
4. Remove media from cells and wash three times with 500 μl of calcium- and magnesium-free Dulbecco’s phosphate-buffered saline (DPBS) supplemented with 0.5 mg/ml of heparin. Note: Heparin is necessary to remove surface-bound protein that might complicate downstream analyses.
5. (Optional) Repeat treatments up to three times for enhanced delivery.
6. Isolate treated cells immediately after heparin wash by digestion with 0.05% trypsin-EDTA at 37 °C for 2 min. Re-suspend detached cells in 0.5 ml of DPBS supplemented with 1% FBS.
7. Measure the fluorescence intensity of each sample by flow cytometry³⁵ using the fluorescein isothiocyanate (FITC) channel (Figure 3). Adjust the forward scatter (FSC) and side scatter (SSC) to place the population of interest on scale, ensuring that populations with different properties are resolved from each other.
8. Collect 10,000 live events for each sample and analyze the data using flow cytometry data analysis software.³⁶ Normalize fluorescence from HeLa cells treated with ZiF-EmGFP to those cells treated only with SFM.

Access restricted. Please log in or start a trial to view this content.

Results

Two-finger ZiF-EmGFP fusion proteins can be expressed in E. coli with >95% homogeneity and high yields (>25 mg/ml) (Figure 2). In general, one- and two-finger ZiF fusion proteins can be produced in quantities nearly identical to those of wild-type unmodified protein. However, in some contexts, five- and six-finger ZiF fusion proteins are unable to be produced in yields high enough for downstream applications.

Direct application of two-finger ZiF-EmGFP protein ...

Access restricted. Please log in or start a trial to view this content.

Discussion

Here, a step-by-step protocol for protein delivery using cell-permeable zinc-finger (ZiF) domains is presented. The ZiF domain does not reduce the activity of fused enzymatic cargo³⁴; allows for the production and purification of proteins in yields nearly identical to those observed with unmodified protein; and can transport proteins and enzymes into a wide range of cell types with efficiencies that exceed traditional cell-penetrating peptide or protein transduction domain systems. Together, these findings ind...

Access restricted. Please log in or start a trial to view this content.

Materials

Name	Company	Catalog Number	Comments
XmaI	New England Biolabs	R0180L
SacI	New England Biolabs	R0156L
Expand High Fidelity PCR system	Roche	11759078001
dNTPs	New England Biolabs	N0446S
4%-20% Tris-Glycine Mini protein gels, 1.5 mm, 10 wells	Life Technologies	EC6028BOX
2x Laemmli Sample Buffer	BioRad	161-0737
T4 DNA Ligase	Life Technologies	15224-017
BL21 (DE3) Competent E. coli	New England Biolabs	C2527I
IPTG	Thermo Scientific	R0391
Zinc Chloride	Sigma-Aldrich	208086-5G
Kanamycin Sulfate	Fisher Scientific	BP906-5
Glucose	Sigma-Aldrich	G8270-100G
Tris Base	Fisher Scientific	BP152-25
Sodium Chloride	Sigma-Aldrich	S9888-25G
DTT	Fisher Scientific	PR-V3151
PMSF	Thermo Scientific	36978
Ni-NTA Agarose Resin	QIAGEN	30210
Glycerol	Sigma-Aldrich	G5516-500ML
Imidazole	Sigma-Aldrich	I5513-25G
Amicon Ultra-15 Centrifugal Filter Units	EMO Millipore	UFC900324
DMEM	Life Technologies	11966-025
Fetal Bovine Serum	Life Technologies	10437-028
Antibiotic-Antimycotic	Life Technologies	15240-062
24-Well Flat Bottom Plate	Sigma-Aldrich	CLS3527-100EA
Poly-Lysine	Sigma-Aldrich	P7280
DPBS, No Calcium, No Magnesium	Life Technologies	21600010
Heparan Sulfate	Sigma-Aldrich	H4777
Trypsin	Life Technologies	25300054
HeLa cells	ATCC	CCL-2
Nano Drop ND-1000 spectrophotometer	Thermo Fisher Scientific
QIAquick PCR Purification Kit	QIAGEN	28104
QIAquick Gel Extraction Kit	QIAGEN	28704