뿔과 긴 Cervid에 대 한 신체 성장에 환경 및 유전학의 상대적 효과 평가 하기 위한 프로토콜

요약

Cervid 인구 가운데 phenotypic 차이 관련이 있을 수 있습니다 인구 수준 유전학 또는 영양; 분별 있는 야생에서 어렵습니다. 이 프로토콜은 우리가 영양 변형 삭제 되었다 제어 연구를 설계 하는 방법을 설명 합니다. 우리는 남성 흰 꼬리 사슴의 phenotypic 변이 유전학 보다 영양에 의해 더 제한 되었다 발견.

초록

Cervid 형 두 가지 범주 중 하나에 배치 될 수 있습니다: 효율, 사치 스러운 형태학 성장, 및 큰 무기와 몸 크기의 성장을 촉진 럭셔리 생존을 승진 시키는. 같은 종족의 인구는 환경 조건에 따라 각 표현 형을 표시합니다. 남성 흰 꼬리 사슴 (Odocoileus virginianus)의 몸과 뿔 크기 미시시피, 미국에서에서 지형 지역 다릅니다 영양 품질에 지역 편차와 강한 상관 관계가 있지만, 기본 주식 및 이전 re-stocking 노력에서 인구 수준 유전학의 효과 무시 수 없습니다. 이 프로토콜은 우리가 나이 및 영양, 같은 표현 형에 영향을 주는 다른 요인 제어 됩니다 제어 연구를 설계 하는 방법을 설명 합니다. 우리는 미시시피, 미시시피 주립 대학 녹슨 도킨스 기념 사슴 단위를 미국에서에서 3 가지 지형 지역에서 야생 임신 암컷과 6 개월 마리의 가져왔다. 같은 지역에서 사슴 세대 반응과 모성 효과 평가 하기 위해 수 있도록 자손의 2 세대 생산 자란 했다. 모든 사슴 같은 높은-품질 (20% 조 단백질 사슴 펠 릿) 다이어트 광고 libitum먹었다. 우리는 유일 하 게 각 신생아를 표시 하 고 몸 질량, 뒷 발, 그리고 몸 전체 길이 기록. 각 연속적인가, 우리 개인 원격 사출을 통해 진정 하 고 동일한 morphometrics 플러스 성인의 뿔 샘플링. 우리는 모든 morphometrics 뿔 크기 (지역 변이 이상 존재)의 완전 한 보상 및 신체 질량 (일부 지역 변이의 증거) 2 세대에서 분명 부분 보상 2 세대에 첫 번째에서 크기가 증가 발견. 2 세대에서 우리의 가난한 품질 남성 뿔 크기에서 40% 증가 신체 질량 그들의 야생 수확에 비해 25% 증가 대해 표시 하는 지역 토양. 우리의 결과 야생 남성 흰 꼬리 사슴 미시시피에서의 phenotypic 변이 더 인구 수준 유전학 보다 영양 품질 차이에 관련 된 것이 좋습니다.

서문

어머니는 임신과 수 유 하는 동안 경험 하는 환경 요인 그녀의 자손의 표현 형, 유전자 형^1,2,3의 독립에 영향을 미칠 수 있습니다. 고품질 환경에 서식 하는 어머니는 효율 형 (작은 뿔과 신체 크기⁴) 하는 자손을 생산 수 있습니다 반면 가능성이 높은-품질 환경에 서식 하는 어머니는 럭셔리 형 (큰 몸과 뿔 크기⁴), 자손을 생산할 예정 이다. 따라서, 높은-품질 환경에서 유지는 자손의 생식 기회^5,6,,78 에 직접 영향을 미칠 수 있습니다 그리고 어머니의 포함 피트 니스를 직접 영향 큰 phenotypic 특성을 가진 남성 자손을 생산 하는 어머니를 허용할 수 있습니다.

비록 영양 taxa (우수 스 있습니다, 우수 스 arctos⁹;에 걸쳐 직접 영향을 phenotypic 특성 Liasis fuscusI ¹⁰; Larus michahellis ¹¹), 여러 가지 요인 미시시피, 미국에서에서 흰 꼬리 사슴 고기에 영향을 미칠 수 있습니다. 뿔과 몸 크기는 약 1 / 3 일부 집단에 대 한 더 큰¹²다른 사람에 비해. 이 변화는 사료 품질^13,14;와 강한 상관 관계가 가장 큰 남성은 마 초의 최고의 품질을 가진 지역에서 발견 된다. 그러나, 미시시피에 흰 꼬리 사슴의 역사 복원 노력 수 있습니다 끌고있다 유전자 병목 또는 창시자 효과^15,16을 또한 부분적으로 흰 꼬리 사슴 표현 형에서 관찰된 지역 변이의 일부를 설명할 수 있습니다.

우리는 우리가 야생 흰 꼬리 사슴, 남성 표현 형 유전자 인구 수준에 의해 제한 됩니다 여부를 평가 하는의 영양 품질을 제어 하는 데 사용 하는 프로토콜을 제공 합니다. 이 프로토콜 모성 효과 후행을 봐도 우리의 인구에 참석 했다. 우리의 제어 디자인 연구는 영양 제한^3,17에 대 한 프록시 환경 변수를 사용 하 여 제한 됩니다 무료 이르기까지 인구에 게 우선 이다. 우리의 제어 디자인 또한 수 있습니다 다른 변수 같은 잠재력 만성 스트레스와 관련 된 사회적 상호 작용 모든 개인 비슷한 주택 및 농업 관행을 복종 된다 지속적인 개최 되. 또한, 영양 직접 영향을 미치는 다른 생활 역사 측면 때문에 복제에서 생존^18,에 이르는¹⁹, 영양 제어 수 있습니다 포유류 생활 역사 측면에 영향을 주는 다른 변수를 평가 하는 조사. 비슷한 프로토콜 (예를 들어, ^20,21) 북미 지역에 걸쳐 다른 ungulates 위한 생활사 측면에 관련 된 질문을 평가 하기 위해 설명 했습니다.

프로토콜

Ethics Statement: The Mississippi State University Institutional Animal Care and Use Committee approved all capture, handling, and marking techniques under protocols 04-068, 07-036, 10-033 and 13-034.

1. Establish Capture Sites, Immobilize and Transport wild White-tailed Deer

1. Identify public and private properties that are enrolled in the Deer Management Assistance Program²² and establish ≥29 capture sites throughout three source regions in Mississippi, USA.
   1. Identify several capture locations within each source region to ensure that the range of genetic variation present in the regional population is captured.
   2. Note: Here, source regions included the Delta, which comprises almost 17% of total land area in Mississippi, USA, and is considered a high-quality soil region with agriculture as the primary land use^23,24. All study animals were captured from this region within the distribution of O. v. virginianus²⁵. Other regions included the Thin Loess region (upper and lower Thin Loess combined), which comprises almost 14% of total land area in Mississippi, USA and is considered a medium quality soil region. Agriculture is also a primary land use in the Thin Loess region, though not as prevalent as in the Delta^23,24. All study animals were captured from this region within the distribution of O. v. virginianus²¹. Lastly, the Lower Coastal Plain (LCP) soil region comprises nearly 22% of Mississippi and is classified as a low quality soil region. Primary land uses in the LCP are pine timber production and livestock grazing^23,24. The LCP also overlaps the geographical distribution of O. v. osceola; four of the six source populations were within 21 km of this distribution²⁵. This subspecies was described as smaller than O. v. virginianus²⁶.

Figure 1: Source Populations. Physiographic regions where pregnant dams and fawns were caught in Mississippi, USA. This figure has been modified from reference³¹. Please click here to view a larger version of this figure.

2. Select potential capture sites that meet the following criteria; habitat characteristics conducive to deer movement, proximity to roads for access, and distribution across the study area.
   NOTE: Capture sites must allow for concealment of the capture technician.
   1. Bait sites with about 10 kg of shelled corn to entice deer to visit and evaluate use based on bait consumption and deer photographed by motion-sensitive cameras. Relocate to alternate sites if deer do not attend baited sites within 5-7 days.
3. During capture events, sit in a concealed "stand."
   1. Place stand about 20 m downwind from the bait pile, taking the prevailing wind direction into consideration so that deer approaching the bait are less able to smell the capture technician.
      NOTE: Elevated stands are strongly preferred, and safety harnesses are required. There are several variations of stands with a variety of commercial sources and use varies by personal preference. For example, a lock-on stand would include seating with a ladder for access attached to a tree with straps. Portable climbing stands can be carried in by the capture technician and allow for increased mobility as the technician can choose a specific tree once they arrive at the capture site. Portable climbing stands are limited to use in straight trees without branches up the chosen height.
4. Use a dart gun coupled with a 3 cc radio-telemetry dart to deliver a mixture of teletamine HCl (4.4 mg/kg) and xylazine HCl (2.2 mg/kg).
   1. Schedule capture efforts to coincide with the typical crepuscular activity cycle of deer²⁷. Begin each capture attempt 2-3 h prior to sunset.
   2. Continue capture events for 2-3 h after sunset using night-vision goggles and a red dot laser for shot placement if deer are not captured during daylight hours.
   3. Take shots at deer when they are broadside and stationary.
      NOTE: The hind quarter of the deer is the target because it has significant muscle tissue and is located away from the heart and lungs.
   4. Wait about 15 min for darted target animals (six-month-old fawns of either sex or pregnant adult females) to become fully immobilized before locating it with directional radio-telemetry equipment.
   5. Confirm individuals are sedated by checking for eye reflexes (blinking). Then apply ophthalmic ointment to the eyes and blindfold deer to reduce stress.
      NOTE: Loss of thermoregulation is a consequence of immobilization.
   6. Use a rectal thermometer to assess body temperature after recovery. Warm deer with heated blankets if the animal's temperature is below 37.7 °C. Cool deer with ice packs if the animal's temperature is above 40.0 °C.
   7. Place deer in a sternal position on a military style gurney and transport deer from the capture location to an enclosed trailer.
   8. After placing the deer into the trailer, reverse the effects of xylazine HCl with 0.125 mg/kg yohimbine HCl²⁸.
   9. Transport all captured deer to the desired captive facility (e.g., Mississippi State University Rusty Dawkins Memorial Deer Unit; MSU Deer Unit) and keep them separated by source region.

2. Captive Facilities and General Husbandry Practices of Research Animals

NOTE: The MSU Deer Unit is subdivided into five 0.4 to 0.8 ha pens.

1. Cover every side of each pen with shade cloth to act as a visual and physical barrier between pens. Shade cloth helps reduce injuries and provides shade during summer months.
2. Place 1-2 elevated box blinds at one end of each pen to facilitate darting events during data collection.
3. Place two trough style feeders at separate ends of each pen to reduce competition for food among deer. Also provide a water trough in each pen.
4. Provide deer with a high-quality diet (20% crude protein deer pellets) ad libitum.
   NOTE: Here, additional available forages within pens included (Trifolium spp) and fescue (Festuca spp) along with volunteer grasses and forbs.
5. If present, maintain available forages within pens using a mixture of herbicides to control broadleaf weeds and grasses using mixture rates found on respective labels.
   NOTE: Using off-campus facilities to house ≥5.5 month old males will likely be needed. These facilities consisted of two 0.7 ha pens on each of three properties with husbandry practices similar to the MSU Deer Unit.

Figure 2: Captive Facility Locations. Study area where satellite facilities and the Mississippi State University (MSU) Deer Unit were located. Shaded areas indicate Oktibbeha (A), Noxubee (B), Attala (C), Scott (D), and Copiah (E), counties, Mississippi, USA.This figure has been modified from reference³⁴. Please click here to view a larger version of this figure.

3. Parasite and Disease Control

1. Monitor research animals for roundworm parasites (Strongyloides spp) using fecal floatation with parasites measured as eggs per gram (EPG).
   1. If present at high levels, provide parasite control by administering a pelleted wormer (active ingredient fenbendazole) at a rate of about 0.77 kg of pelleted wormer per 22.7 kg of feed during the month of May.
   2. If parasite levels remain high after initial treatment, use an ivermectin pour-on treatment (5 mg/mL)²⁹, mixed at a rate of 2 mL/0.45 kg and administer to animals at a rate of 0.45 kg of treated feed per 45.4 kg of animal mass.
      NOTE: Epizootic hemorrhagic disease is sometimes lethal viral disease spread by a biting midge (Culicoides spp) during summer and fall months. If present, treat the research facility with insecticide (5% ultra-low volume insecticide) 2-3 times per week from July 1 to October 1 to decrease prevalence of the vectors among research animals. Spray this insecticide within each pen and around the perimeter of the facility about 90 min before official sunset via fogger. Preferred methods to control for parasites and diseases are unique to each captive facility. Veterinarians must be consulted during any captive wildlife research to ensure animal health and safety.

4. Data Collection

Figure 3: Data Collection of Newborn Fawns. Measuring hind foot length from a new born fawn at the Mississippi State University Rusty Dawkins Memorial Deer Unit in Oktibbeha County, Mississippi, USA. Please click here to view a larger version of this figure.

1. Search the captive facility daily for fawns during the parturition season.
   1. Uniquely mark newborn fawns with medium plastic ear tags using an ear tagger with antibiotic applied to the male end of the tag to prevent potential infection. Place ear tag about the center of the fawn's ear.
   2. Measure body mass (nearest 0.01 kg) with a digital hanging scale and measure hind foot length and total body length (nearest mm).
   3. Collect hair samples and send them to a remote site for parentage assignment (see the Table of Materials).
      NOTE: Parentage assignment was made using DNA based on a proprietary, non-statistical custom structured query language database. In the pairwise allele comparison, the remote parentage assignment site assigned parentage when they excluded all but one sire and one dam based upon a shared allele from each parent at all loci tested (B. G. Cassidy, personal communication). This method of parentage assignment was also used in previous research conducted on captive white-tailed deer^30,31.
   4. Administer 2 cc of Clostridium perfringens types C and D toxoid and Clostridium perfringens types C and D antitoxin subcutaneously and administer 0.3 cc/kg of ivermectin in propylene glycol (Mississippi State University Veterinarian School, Mississippi, USA) orally to each fawn.
2. Chemically immobilize adult males (≥1.5 years-old) during October and November for data collection.
   1. Immobilize penned adults using the same combination of teletamine HCl and xylazine HCl used for capture of wild animals (step 1.4).
   2. During sedation events, walk the technician who will be darting to the end of the pen where the elevated blinds are located. Have a single technician in each of two blinds.
   3. Have the individual who walked the technician to the blind walk back to the opposite end of the pen.
      NOTE: Deer move away from these technicians and locate themselves in front of the blinds where technicians are in position to take ethical shots on each deer.
   4. Take shots at deer when they are broadside and stationary (section 1.4).
   5. Wait about 15 min for darted animals to become fully immobilized before approaching it.
   6. Confirm individuals are sedated by checking for eye reflexes (blinking). Apply ophthalmic ointment to the eyes and blindfold deer to reduce stress.
   7. After the darters successfully sedate an individual deer, monitor the deer's vital rates.
      1. Use a rectal thermometer to assess body temperature after recovery. Warm deer with heated blankets if the animal's temperature is below 37.7 °C. Cool deer with ice packs if the animal's temperature is above 40.0 °C.
   8. Load the deer on a military-style gurney, and transport it via utility task vehicle to a predetermined data collection area.
   9. Once transported, record the same morphometric measurements recorded at birth (step 4.1).
      1. Measure body mass (nearest 0.01 kg) with a digital hanging scale and measure hind foot length and total body length (nearest mm).
         NOTE: Individual deer react differently to the combination of drugs used during sedation events so administer about 0.1-0.3 cc of the teletamine HCl and xylazine HCl mixture (depending on body mass of an individual deer) if an individual comes out of sedation before data collection is completed.
   10. Administer size-appropriate amounts of antibiotic, ivermectin, a clostidrial vaccine, and a leptospirosis vaccine to all deer after they are transported to the data collection area (see sections 1 and 3).
3. Take three antler measurements from adult males using an antler measuring tape while the animal is sedated.
   1. Measure the inside spread (widest distance between main beams), basal circumference (smallest diameter located between the burr and G1 tine), and main beam length (distance from antler base to the tip of the main beam) of antlers prior to antler removal.
   2. Remove antlers about 3 cm above the burr using a reciprocating saw. Do not remove antlers less than 3 cm.

Figure 4: Data Collection of Adult Males. Antler removal via reciprocating saw from a captive adult male white-tailed deer. Please click here to view a larger version of this figure.

4. After all data is collected from the sedated individual, place the deer into the appropriate pen and administer either 0.125 mg/kg yohimbine HCl²⁸ or 4.0 mg/kg tolazoline HCl³² to reverse the effects of xylazine HCl. Monitor individuals to ensure they remain in a sternal position until they come out of sedation and are fully alert.
   NOTE: If complications occur and animals must be euthanized, then euthanasia by cerebral dislocation via bolt stunner and severing of the jugular vein are ethical means to dispatch the animal.
5. Bring the antlers to a designated area to finish measuring antler size.
   1. Measure each individual tine protruding from the main beam (G1, G2, G3, etc.) and additional abnormal points by aid of wire.
      NOTE: Points that do not have a matching counterpart on the opposite main beam or are not consistent with the definition of a typical antler set are defined by the Boone and Crockett Club³³.
   2. Wrap the wire around where the tine intersects the main beam and mark that point for reference.
   3. Measure from this reference point to the tip of the tine and repeat for each tine.
   4. Collect remaining circumference measurements by identifying the smallest point between the G1 and G2 tines (H2 circumference), the G2 and G3 tines (H3 circumference), and the G3 and G4 tine if present (H4 circumference).
   5. If the G4 tine is not present, measure the distance between the midpoint of the G3 tine and the end of the main beam and measure the H4 circumference at the midway point.
   6. Measure less than four circumferences when antlers contain less than three tines.
      NOTE: For example, a main beam with two typical points include only three circumference measurements. Individuals may use other guidelines (Safari Club International) for calculating antler size; however, consistent methods must be used for each animal for valid comparison.
   7. After making all measurements, calculate an antler score similar to the gross nontypical Boone and Crockett score³³.
   8. Weigh antlers to the nearest 0.1 g using a scientific digital scale and assign a minimal critical antler mass of 1 g for first-year animals with antlers shorter than 3 cm.
6. Chemically immobilize penned juveniles at approximately 5.5 months of age using the same methods for adults (section 4.2) and mark juveniles with a large plastic ear tag (step 4.1.1).
   1. Use the same drug mixture rates to immobilize captive adults as used for immobilizing wild deer (section 1).
   2. Collect the same measurements collected at birth (step 4.1.2) and administer the same prophylactics as adults (section 4.2).
      NOTE: After all data is collected, transport each juvenile male to its randomly assigned satellite facility via trailer.

5. Producing First- and Second-generation Offspring

1. Classify six-month-old wild-caught fawns and offspring born at the captive facility from wild-caught mothers as first-generation individuals.
2. During the breeding season, place two males with 7-16 females for an average breeding sex ratio of one male to eight females.
   NOTE: Select breeding males from satellite facilities based on physical appearance, because the healthiest males (largest antlers and body size) are most likely to service females for the entirety of the breeding season without suffering from injury due to the aggressive nature of males during the breeding season.
   1. Only allow deer to breed with other individuals from the same source region (e.g., Delta males breed Delta females, Thin Loess males breed Thin Loess females, and LCP males breed LCP males).
3. Classify deer conceived by first-generation parents as second-generation offspring. Raise these individuals in captivity from birth and feed the same high-quality diet as their parents.
   NOTE: Females may produce offspring multiple years but typically with different sires each year. Collect the same data on second-generation offspring as collected on first-generation and wild-caught individuals.

결과

개인 나이, 영양 질, 그리고 유전학 남성 흰 꼬리 사슴 표현 형에 영향. 우리의 연구 우리가 영양 사슴의 품질 제어를 소모 했다 디자인과 비교 년 클래스 내에서 각 사슴의 나이 식별할 수 있었습니다. 제어 함으로써 영양 및 우리의 연구 설계와 나이, 우리 더 이해 여부 인구 수준 유전학 두 연구 인구에서 남성의 표현 형을 제한 했다 수 있었다. 향상 된 영양 3.5 세 남성 흰...

토론

우리의 프로토콜;와 관련 된 몇 가지 단계가 그러나,이 프로토콜 성공을 보장 하기 위해 수행 해야 하는 4 개의 중요 한 단계가 있다. 첫째, 야생 사슴의 캡처, 동안 단일 소스 (1.1.1 단계)의 지역에 걸쳐 여러 캡처 위치 되어야 합니다. 여러 개의 캡처 위치를 갖는 소스 영역과 관련 된 모든 유전 가변성 사슴 중에서 대표 될 것 이다 보장 합니다. 둘째, 사슴 유지 되어야 한다 분리 된 소스 지역별 사?...

자료

Name	Company	Catalog Number	Comments
Shelled Corn
Elevated Stand
Safety Harness
Ground Blind
Model 196 Projector	Pneu-Dart, Pennsylvania, USA
3cc Radio-Telemetry Darts	(Pneu-Dart, Pennsylvania, USA)
Various Sized Darts	(Pneu-Dart, Pennsylvania, USA)
Teletamine HCl	(Telazol, Fort Dodge Animal Health, Iowa, USA)
Xylazine HCl	(West Texas Rx Pharmacy, Amarillo, Texas, USA)
Yhoimbine HCl
Tolazoline HCl
Military Style Gurney
Rectal Thermometer
Shade Cloth
20% Crude Protein Deer Pellets	(Purina AntlerMax Professional High Energy Breeder 59UB, Purina, Missouri, USA)
Trough Style Feeders
Commercial Clover	(Durana Clover, Pennington Seed Co., Georgia, USA)
Commercial Fescue	(Max-Q Fescue, Pennington Seed Co., Georgia, USA)
Blankets
Ice Packs
Broadleaf Weed Control (2, 4-DB Herbacide, Butyrac 200)
Grass Control	(Poast Herbacide, BASF Co.)
Pelleted Wormer	Safeguard Co.,		active ingredient fenbendazole
Parasite Pour-on Treatment	(Ivomec, Merial Co.)
Insecticide	Riptide, McLaughlin Gormley King Co.)
Medium and Large Plastic Ear Tags	(Allflex, Texas, USA)
Remote site that assigned parentage	DNA Solutions Animal Solutions Manager (DNA Solutions, Oklahoma, USA)
Digital Hanging Scale	(Moultrie, EBSCO Industries, Inc.)
Tape Measure
Clostridium Perfringens Types C and D Toxoid Essential 3	(Colorado Serum Co.)
Clostridium Perfringens Types C and D Antitoxin Equine Origin	(Colorado Serum Co.)
Ivermectin in propylene glycol
Antibiotic	(Nuflor, Schuering-Plough Animal Health Corp., New Jersey, USA)
Ivermectin	(Norbrook Labratories, LTD., Down, Northern Ireland, UK)
Clostidrial vaccine	(Vision 7 with SPUR, Ivesco LLC, Iowa, USA)
Leptospirosis vaccine	(Leptoferm-5, Pfizer, Inc., New York, USA)
Trailer for transport
Reciprocating saw	(DEWALT, Maryland, USA)
Scientific Digital Scale	(Global Industrail, Global Equipment Company Inc)
Antler Measuring Tape
Fogger
Plastic Ear Tags	(Allflex, Texas, USA)
Plastic Ear Tagger	(Allflex, Texas, USA)