Synthesis of a Deuterated Standard for the Quantification of 2-Arachidonoylglycerol in Caenorhabditis elegans

Summary

This work describes a robust and straightforward method to detect and quantify the endocannabinoid 2-arachidonoylglycerol (2-AG) in C. elegans. An analytical deuterated standard us prepared and used for the quantification of 2-AG by isotopic dilution and liquid chromatography-electrospray ionization-tandem mass spectrometry (LC-ESI-MS/MS).

Abstract

This work presents a method to prepare an analytical standard to analyze 2-arachidonoyl glycerol (2-AG) qualitatively and quantitatively by liquid chromatography-electrospray Ionization-tandem mass spectrometry (LC-ESI-MS/MS). Endocannabinoids are conserved lipid mediators that regulate multiple biological processes in a variety of organisms. In C. elegans, 2-AG has been found to possess different roles, including modulation of dauer formation and cholesterol metabolism. This report describes a method to overcome the difficulties associated with the costs and stability of deuterated standards required for 2-AG quantification. The procedure for the synthesis of the standard is simple and can be performed in any laboratory, without the need for organic synthesis expertise or special equipment. In addition, a modification of Folch's method to extract the deuterated standard from C. elegans culture is described. Finally, a quantitative and analytic method to detect 2-AG using the stable isotopically labeled analog 1-AG-d₅ is described, which provides reliable results in a fast-chromatographic run. The procedure is useful for studying the multiple roles of 2-AG in C. elegans while also being applicable to other studies of metabolites in different organisms.

Introduction

Endocannabinoids regulate multiple biological processes in a variety of organisms and are conserved lipid mediators¹. The first discovered and most well-characterized endocannabinoids are anandamide (arachidonoylethanolamide, AEA) and 2-arachidonoyl glycerol (2-AG). Endocannabinoids play many critical roles, including those involved in brain reward systems as well as drug addiction, memory, mood, and metabolic processes². AEA and 2-AG are only synthesized when needed and have short life spans, and they are degraded through transport protein reuptake and hydrolysis³.

The use of animal models like Caenorhabditis elegans (C. elegans) has become important to study the large variety of biological processes including apoptosis, cell signaling, cell cycle, cell polarity, gene regulation, metabolism, ageing, and sex determination^4,5. Additionally, C. elegans is an excellent model for studying the physiological roles of polyunsaturated fatty acids (PUFAs). AEA has been identified in C. elegans and is reduced under dietary restriction⁶. This deficiency extends the lifespan of the nematode through a dietary restriction mechanism that can be suppressed by supplementation with the endocannabinoid. Recently, it was discovered that 2-AG and AEA play fundamental roles in the regulation of cholesterol trafficking in C. elegans⁷. More importantly, it was determined that supplementation with exogenous 2-AG can rescue dauer arrest, which is caused by the impaired cholesterol trafficking in Niemann-Pick type C1 C. elegans mutants.

To gain a better understanding of 2-AG's relationship with cholesterol trafficking and other biological processes in the nematode (i.e., monoaminergic signaling, nociception and locomotion), it is crucial to study this endogenous metabolite and how it is affected under certain environmental and dietary conditions^{8,9,10,11,12,13}. Therefore, it is imperative to design and optimize a method to detect and quantify endogenous 2-AG in C. elegans that is simple to use for scientists of different fields, especially those who study the nematode's behavior in relation to this endocannabinoid.

In 2008, Lethonen and coworkers succeeded in identifying 2-AG and AEA in C. elegans using LC-MS analytical methods¹⁴. In 2011, they managed to expand this technique to other endocannabinoids¹⁵. More recent work has shown other analytical methods that have been successful in detecting and quantifying endocannabinoids in C. elegans, including mass spectrometry and GC-MS^16,17,18, and it has also been reported that similar analytical methods can be expanded to other models¹⁹.

Previously reported analytical methods used for quantifying 2-AG in biological samples usually involve the use of deuterated standards that are commercially acquired and require availability for the purchase^20,21. Many analytical standards for LC-MS/MS quantification of endocannabinoids are commercially available from different providers. Nevertheless, they are expensive, are sensitive, and become oxidized over time, due to the presence of multiple double bonds. The most common versions of these standards are based on the octa-deuterated arachidonic acid and are suitable for quantification by isotope dilution LC-MS/MS^14,22. Also, most of these standards are substituted in position 2 of the glycerol, making them unstable under most conditions since they are prone to acyl migration^19,23.

To overcome the difficulties associated with the costs and stability of these deuterated standards, a convenient and simple method is presented to prepare an analytical standard based on glycerol-d₅. The sequence to prepare the penta-deuterated standard requires a three-step procedure that results in the standard 1-AG-d₅, which is stable and does not undergo acyl migration (the main issue when aiming to synthesize 2-monoacylglycerols).

The main objective here is to show a simple and reproducible method to study 2-AG in C. elegans, including the synthesis of the analytical deuterated standard, preparation and extraction of the nematode samples, and analysis by LC-MS/MS (Figure 1). This synthetic procedure is achievable without the sophisticated organic synthesis knowledge or special equipment, making it suitable for scientists from different fields who are studying C. elegans behavior under endocannabinoid influence. The method is also expandable to other study models, making it useful for different targets. The standard, prepared as reported here, has been applied to successfully develop a fast and reliable chromatographic method that allows for effective detection and quantification of 2-AG in a reproducible manner.

Protocol

1. 1-AG-d₅ preparation

NOTE: For obtaining 1-AG-d₅ as a deuterated internal standard for quantification assays, follow the protocol as detailed below.

1. Differential protection
   1. To only protect primary alcohols, first add 38 mg of glycerol-d₈ to a 10 mL reaction tube using a Pasteur pipette and add a magnetic stirrer.
   2. Add 5 mL of anhydrous dichloromethane (DCM) using a 5 mL Hamilton syringe, and fill the tube with dry N₂ to yield an inert atmosphere.
   3. Prepare a bath using a shallow Dewar flask filled with distilled ethyl acetate.
   4. Fit the hermetically closed reaction tube inside the bath and cool it by slowly adding liquid N₂ to the ethyl acetate until the solvent is frozen.
      CAUTION: Liquid violently boils at room temperature (RT) and can cause severe burns when contacting eyes and skin.
   5. Add 54 mg of anhydrous collidine using a Hamilton syringe.
      CAUTION: Collidine is volatile and has a very strong and unpleasant scent.
   6. Add 70 mg of tert-butyldimethylsilyl chloride and stir the entire solution for 3 h at -78 °C on a magnetic stirrer.
   7. After 3 h, leave the reaction to warm at RT and keep stirring for an additional 12 h.
   8. Add 2 mL of brine to quench the reaction.
   9. Extract the solution 3x with 2 mL of distilled dichloromethane using a separating funnel, saving the organic extract each time.
   10. Combine the three organic extracts and dry them over sodium sulfate.
   11. Evaporate the dichloromethane under reduced pressure in a vacuum rotary evaporator carefully to avoid solvent projections.
   12. Purify the crude mixture by column chromatography using silica gel as the stationary phase and a 10% increasing hexane/ethyl acetate gradient, starting from 100% hexane and finishing with 100% ethyl acetate.
   13. Combine the product-containing fractions and remove the solvent under reduced pressure in a vacuum rotary evaporator to obtain the pure 1-O,3-O-bis-(TBDMS) glycerol-d₅ as a colorless liquid.
2. Esterification
   1. Add 10 mg of the 1-O,3-O-bis(TBDMS)-glycerol-d₅ (previously synthesized) to a 10 mL reaction tube using a Pasteur pipette and add a magnetic stirrer.
   2. Add 2 mL of anhydrous dichloromethane using a 5 mL Hamilton syringe, and fill the tube with dry N₂ to yield an inert atmosphere.
   3. Cool the solution to 0 °C using an ice bath.
   4. Add 36 mg of arachidonic acid using a multi-volume adjustable micropipette and stir.
   5. Add 15 mg of 4-dimethylaminopyridine and stir.
   6. Add 15 mg of N,N'-diisopropylcarbodiimide using a multi-volume adjustable micropipette and stir.
   7. Let the mixture react at 0 °C for 3 h.
   8. After 3 h, leave the reaction to warm at RT and keep stirring for an additional 12 h.
   9. Add 2 mL of water to quench the reaction.
   10. Extract the organic solution 3x with 2 mL of distilled dichloromethane (DCM) using a separating funnel.
   11. Place the three organic extracts in the same tube and dry them over sodium sulfate.
   12. Evaporate the dichloromethane under reduced pressure in a vacuum rotary evaporator carefully to avoid solvent projections.
   13. Purify the crude mixture by column chromatography using silica gel as the stationary phase and a 10% increasing hexane/ ethyl acetate gradient, starting from 100% hexane and finishing with 50% hexane/50% ethyl acetate.
   14. Combine the product-containing fractions and remove the solvent under reduced pressure in a vacuum rotary evaporator to obtain the pure 1-O, 3-O-bis(TBDMS)-2-AG-d₅ as a yellowish liquid.
3. Deprotection
   1. Add 15 mg of the 1-O,3-O-bis(TBDMS)-2-AG-d₅ (previously synthesized) to a 10 mL reaction tube using a Pasteur pipette and add a magnetic stirrer.
   2. Add 2 mL of anhydrous THF using a 5 mL Hamilton syringe, and fill the tube with dry N₂ to yield an inert atmosphere.
   3. Cool the solution to 0 °C using an ice bath.
   4. Add 150 µL dropwise of 1 M tetrabutylammonium fluoride solution in THF using a Hamilton syringe.
   5. Let the reaction warm to RT and stir for 1 h.
   6. After 1 h, add 2 mL of water to quench the reaction.
   7. Extract the solution 3x with 2 mL of distilled dichloromethane using a separating funnel.
   8. Combine the three organic extracts and dry them over sodium sulfate.
   9. Evaporate the dichloromethane under reduced pressure in a vacuum rotary evaporator to obtain the pure 1-AG-d₅ as a yellowish liquid.
4. Monitor all reactions by thin layer chromatography performed on silica gel 60 F₂₅₄ pre-coated aluminum sheets. Visualize the bands under a 254 nm UV lamp after staining with an ethanolic solution of 4-anisaldehyde.

2. Preparation of standard stock and measuring solutions

1. Dissolve 1 mg of the internal standard 1-AG-d₅ in 1 mL of ACN and sonicate for 1 min to obtain the 1,000 ppm standard stock solution.
2. To prepare the 1,000 ppb solution used for quantification in worms, first prepare a 10 ppm solution: take 10 µL of the stock solution using a Hamilton syringe and dilute it to a final volume of 1 mL by adding 990 µL of ACN.
3. Take 100 µL from the solution produced in step 2.2 using a Hamilton syringe, and dilute it to a final volume of 1 mL by adding 900 µL of ACN to obtain the 1,000 ppb solution used for the quantification.
4. Sonicate for 1 min between each step to ensure complete solubilization. Store the solutions at -78 °C to maintain the concentrations and integrity of the standards. After the standard solution is used, flow some nitrogen before closing the vial to prevent oxidation.

3. Growth and maintenance of C. elegans

NOTE: Seed the nematode growth medium (NGM) agar plates with E. coli OP50 and propagate the worms on these plates.

1. Mix 3 g of NaCl with 17 g of agar.
2. Add 2.5 g of peptone, then add 975 mL of H₂O.
3. Autoclave for 50 min, then cool the flask to 55 °C.
4. Mix the following: 1 mL of 1 M CaCl₂, 1 mL of 1 M MgSO₄, 25 mL of 1 M KH₂PO₄ buffer (all of which have been previously autoclaved), and 1 mL of 5 mg/mL cholesterol in ethanol.
5. While maintaining a sterile environment, dispense the NGM solution into 60 mm Petri plates, filling the plates to two-thirds of their volume. Store the plates at 4 °C.
6. Streak the E. coli bacterial culture from a -80 °C glycerol stock onto the LB agar plate. Let it grow on the plate overnight at 37 °C.
7. Pick up a single colony to inoculate 100 mL of liquid LB overnight at 37 °C with agitation.
   NOTE: It is not necessary to check the O.D. because this strain can reach stationary phase over this time.
8. Remove the stored NGM plates, remove the lids in the laminar flow hood, and leave open to allow evaporation of excess moisture from the plates.
9. Once the plates are dried, use a Pasteur pipette to add 100 µL of OP50 E. coli to the center of the plate without spreading.
10. Leave the OP50 E. coli lawn to grow overnight at RT or at 37 °C for 8 h.
11. Add the desired number worm embryos obtained by hypochlorite treatment or "bleaching" (Section 4).
    NOTE: Cool the plates to RT before the addition of worms.

4. Bleaching technique for synchronizing C elegans cultures

1. Seed and chunk worms onto 6 cm NGM plates.
2. Leave the worms growing for 2-3 days to obtain sufficient numbers of eggs and gravid adults on the plate.
3. Once there are enough eggs/adults, pour 5 mL of M9 onto the plate.
4. Transfer the worms to a 15 mL centrifuge tube using a glass pipette.
5. Centrifuge the tube for 2 min at 2,000 x g and pellet the worms.
6. Suction out most of the M9, avoiding disturbance of the worm pellet.
7. Add 3 mL of bleaching solution (2:1:1 ratio of NaOH:NaOCl:H₂O).
8. Invert gently to mix the solution for 5 min or until the number of intact adult worms decreases.
   CAUTION: Do not bleach for more than 5 min.
9. Centrifuge for 1 min at 2,000 x g and suction most of the bleaching solution without disturbing the worm pellet.
10. Add 15 mL of M9 and mix well.
11. Centrifuge again at 2000 x g for 1 min.
12. Suction out most of the M9 without disturbing the worm pellet.
13. Repeat steps 4.10-4.12 one or two more times.
14. Add 5 mL of fresh M9 and agitate.
15. Let the eggs hatch overnight with gentle rocking.

5. Worm sample preparation

1. Let the N2 embryos obtained by the bleaching procedure hatch overnight in M9 buffer (5 mL in a 15 mL centrifuge tube) at 20 °C.
2. Harvest the synchronized L1s by centrifuging the tube for 2 min at 2,000 x g.
3. Wash the worms with M9 buffer 1x, then quantify the number of live L1 worms.
4. Seed approximately 10,000 worms into NGM plates (10 cm diameter) with 1 mL of OP50 E. coli (previously dried).
5. Incubate the plates for 48 h at 20 °C until worms reach the L4 stage.
6. Harvest the worms using cold M9 buffer in a 15 mL centrifuge tube, wash them 1x, then and transfer them to a 1.5 mL tube.
7. Pellet the worms by centrifugation at 2,000 x g for 1 min, eliminate most of the supernatant, immerse the tubes in liquid nitrogen, and store at -80 °C.

6. Lipid extraction

1. Thaw approximately 100 µL of frozen worm pellets belonging to N2 on ice, add 1.3 mL of methanol, and sonicate the sample for 4 min.
2. Add 2.6 mL of chloroform, and 1.3 mL of 0.5 M KCl/0.08 M H₃PO₄ to a final ratio of 1:2:1, 1,000 ppb of the internal standard 1-AG-d₅, and butylated hydroxytoluene as an antioxidant agent at a final concentration of 50 µg/mL.
3. Vortex the samples for 1 min and sonicate in an ultrasonic water bath for 15 min on ice.
4. Vortex the samples 2x for 1 min and centrifuge for 10 min at 2,000 x g to induce the phase separation.
5. Collect the lower phase and collect it in a clean tube, dry it under nitrogen, and resuspend the solid residue in 100 µL of ACN.

7. Endocannabinoid analysis by HPLC-MS/MS

1. Use liquid chromatography coupled with an ESI triple quadrupole mass spectrometer to detect and quantify 2-AG from nematode samples.
2. Use the following ratio for reversed-phase HPLC: from 0.0-0.5 min H₂O:ACN (40:60), 0.5-6.5 min H₂O:ACN (40:60) to (25:75), 6.5-7.5 min H₂O:ACN (25:75), 7.5-8.0 min H₂O:ACN (25:75) to (40:60), 8.0-12.0 min H₂O:ACN (40:60).
3. Maintain the column temperature at 40 °C and set the autosampler tray temperature to 10 °C.
4. Set the following ionization conditions: positive-ion mode; drying gas (N₂) temperature = 300 °C; drying gas flow rate = 10 L/min; nebulizer pressure = 10 UA; and cap. voltage = 4 kV.
5. For the analyte detection, use MRM with the following transitions: 379.2 m/z to 289.2 m/z for 2-AG; and 384.2 m/z to 289.2 m/z for 1-AG-d₅.

8. Endocannabinoid quantification in worms

1. Use deuterated internal standard 1-AG-d₅ and calculate the peak area ratios of the analyte to the internal standard.
2. Use the following transitions: 384.2 m/z to 287.2 m/z for 2-AG; and 379.2 m/z to 287.2 m/z for 1-AG-d₅.
3. Calculate the concentration of the endogenous 2-AG by comparing to the peak area ratios of the deuterated standard using the concentration value of the standard.

Results

An isotopically labeled analog was successfully synthesized from commercially available d₈-glycerol and arachidonic acid using a 3-step synthetic method (Figure 2, Figure 3). These steps are straightforward and do not require sophisticated equipment, specially controlled conditions, or expensive reagents. Thus, this method is robust and may be successfully extended to synthesize monoacylglycerides containing different ...

Discussion

Endocannabinoids are a class of lipids that have been implicated in the regulation of dauer formation in C. elegans⁷. More specifically, the synthesis of polyunsaturated fatty acids (PUFAs) is important for cholesterol trafficking and the reproductive development of worms. It is revealed here that 2-AG, an arachidonic acid containing endocannabinoid, is responsible for restituting the dauer larva to its normal cycle in worms that have impaired cholesterol metabolism⁷

Materials

Name	Company	Catalog Number	Comments
4-dimethylaminopyridine	Sigma-Aldrich	107700	reagent grade, 99%
antioxidant BHT	Sigma-Aldrich	W21805
Arachidonic acid	Sigma-Aldrich	10931
Glycerol-d8	Sigma-Aldrich	447498
Mass detector Triple Quadrupole	Thermo Scientific		TSQ Quantum Access Max
N,N’-diisopropylcarbodiimide	Sigma-Aldrich	D125407
NMR spectrometer	Bruker		Avance II 300 MHz
reversed-phase HPLC column	Thermo Fisher	25003-052130	C18 Hypersil-GOLD (50 x 2.1 mm)
tert-Butyldimethylsilyl chloride	Sigma-Aldrich	190500	reagent grade, 97%
tetrabutylammonium fluoride	Sigma-Aldrich	216143	1.0M in THF
UHPLC System	Thermo Scientific		Ultimate 3000 RSLC Dionex
worm strain N2 Bristol	Caenorhabditis Genetics Center (CGC)