Determination of Cardiac Output in a Porcine Model for Ex Vivo Pulmonary Perfusion

Summary

This protocol describes the surgical technique used for the placement of a thermodilution catheter through the jugular vein in pigs to estimate cardiac output and ensure adequate lung perfusion during ex vivo lung perfusion (EVLP).

Abstract

Due to their physiological similarities to humans, pigs are used as experimental models for ex vivo lung perfusion (EVLP). EVLP is a technique that perfuses lungs that are not suitable for transplantation via an extracorporeal circulation pump to improve their function and increase their viability. Existing EVLP protocols are differentiated by the type of perfusion solution and perfusion flow, which varies from 40%-100% of the estimated cardiac output (CO) according to the body surface area (BSA). Devices for measuring CO use simple physical principles and other mathematical models. Thermodilution in animal models continues to be the reference standard for estimating CO because of its simplicity and ease of reproduction. Therefore, the objective of this study was to reproduce the measurement of CO by thermodilution in pigs and compare its precision and accuracy with those obtained by the BSA, weight, and Fick's method, to establish perfusion flow during EVLP. In 23 pigs, a thermodilution catheter was placed in the right jugular vein, and the carotid artery on the same side was cannulated. Blood samples were obtained for gasometry, and CO was estimated by thermodilution, adjusted body surface area, Fick's principle, and per body weight. The CO obtained by the BSA was greater (p = 0.0001, ANOVA, Tukey) than that obtained by the other methods. We conclude that although the methods used in this study to estimate CO are reliable, there are significant differences between them; therefore, each method must be evaluated by the investigator to determine which meets the needs of the protocol.

Introduction

In lung transplantation centers, ex vivo lung perfusion (EVLP) is a tool that helps increase the potential for donation of lungs that do not meet the standard criteria for transplantation¹. This is achieved by preserving and improving the lung functionality of donors with brain death or cardiac arrest, as well as by evaluating lung performance before transplantation^2,3,4. In EVLP, an extracorporeal circulation pump allows perfusion of the lung to be transplanted through a membrane gas exchanger and a leukocyte trapping filter⁵.

To date, several EVLP protocols have been described (Toronto, Lund, and Organ Care System). These are differentiated by the type of perfusion solution used, whether the left atrium is kept open or closed during perfusion, and by the perfusion flow, which varies from 40% to 100% (depending on the technique used) of the estimated cardiac output (CO) of the donor^6,7,8. CO is the amount of blood pumped by the heart per minute⁹ and is the mechanism by which tissue perfusion is maintained. Thus, CO monitoring ensures proper tissue oxygenation. CO, a product of the heart rate and the stroke volume, is measured in liters^10,11,12. However, this approach for maintaining tissue perfusion also depends on other factors, such as venous return, peripheral oxygen use, systemic vascular resistance, respiration, total blood volume, and body position¹².

There are several devices for measuring and monitoring CO, some of which use simple physical principles, while others use mathematical models. These methods include the Fick principle, thermodilution (transpulmonary or lithium dilution), analysis of the arterial pressure wave to estimate stroke volume (SV), and less invasive methods such as Doppler or thoracic bioreactance. However, no CO monitoring device can meet all clinical requirements due to the limitations of the corresponding monitoring technique^10,13.

The measurement of CO by transcardiac thermodilution is a simple and easily reproducible method in pigs. It involves placing a catheter with a thermistor in the pulmonary artery and injecting a volume of liquid with a temperature lower than that of the blood. The thermistor detects changes in temperature over time, which are then plotted in the form of a curve, with the area under the curve representing minute volume¹⁴. Various studies have described that for EVLP animal models, CO can be calculated by weight (100 mL/kg)¹⁵, thermodilution, and Fick's method^10,13. However, in the clinic, CO is calculated using the cardiac index (CI), which is the CO adjusted to the donor's body surface area¹⁶. Nevertheless, there are no studies comparing these methods in experimental pig models.

The objective of this study was to reproduce the measurement of CO by thermodilution in pigs and compare its precision and accuracy with those obtained using CO adjusted by BSA, weight, and Fick's method to establish perfusion flow during EVLP.

Protocol

The protocol (B09-17) was approved by the bioethics committee of the INER (Instituto Nacional de Enfermedades Respiratorias "Ismael Cosio Villegas"). Twenty-three clinically healthy Landrace pigs of either sex, weighing between 20-25 kg, were used for this study. The animals were handled according to the technical specifications for the Care and Use of Laboratory Animals of the Official Mexican Standard¹⁷ and the Guide for the Care and Use of Laboratory Animals of the USA¹⁸. All animals were obtained from the Instituto Nacional de Enfermedades Respiratorias Ismael Cosio Villegas and were housed in individual cages under identical environmental conditions (12 h of light and 12 h of darkness, temperature of 22 °C, on solid slatted floors) and provided with water and food (Pellet) ad libitum. In all animals, a thermodilution catheter was placed in the right jugular vein, and an arterial catheter was placed in the carotid artery on the same side to collect blood gases and then calculate the CO. The details of the reagents and equipment used are listed in the Table of Materials.

1. Experimental preparation

1. Dilute 1000 IU of heparin in each of three 250 mL 0.9% sodium chloride solutions (saline solution, SS).
2. Attach pressure transducers to the vital signs monitor. Use each transducer to measure the pressure at the corresponding port of the thermodilution catheter.
3. Connect the heparinized solutions to the pressure transducer using an infusion set, checking that there are no air bubbles inside it.
4. Remove the thermodilution catheter from the packaging. Immerse the distal end in 0.9% NaCl to check the integrity of the balloon.
5. Check the patency of the distal and proximal catheter connections. Keep the catheter on the surgical instrument table until use.

2. Animal preparation

1. Administer 0.05 mg/kg atropine and 4 mg/kg tiletamine-zolazepam intramuscularly to all pigs in the animal preparation room (following institutionally approved protocols).
2. Leave the pigs undisturbed but under surveillance until they become recumbent and remain in this position without signs of excitement or response to nociceptive stimuli.
3. Place the sedated animal in the prone position and insert a catheter into the marginal vein of the left ear.
4. Transfer the animal to the operating room for surgery.
5. Place the animal in the dorsal position and administer 4 mg/kg propofol IV, 300 µg/kg vecuronium bromide, and 0.1 mg/kg fentanyl IV. Apply an ophthalmic ointment to prevent eye dryness during the anesthesia procedure.
6. Lower the mandible of the pig with the help of laboratory staff to keep the mouth open and the tongue sticking out.
7. Spray 10% lidocaine onto the vocal cords, clear accumulated saliva with gauze held by ring forceps, and separate the epiglottis from the laryngeal opening.
8. Identify the tracheal entrance with a laryngoscope and a number 3 straight blade, then insert a 7 Fr endotracheal tube with a balloon.
9. Inflate the balloon and fix the tube to the mandible after verifying its placement within the airway.
10. Connect the pig to the anesthesia machine to maintain an anesthetic state with 2.5%-3% sevoflurane (Figure 1).
11. Ventilate the animal in volume-controlled ventilation mode with a frequency of 25 breaths/min, tidal volume of 6-8 mL/kg weight, FiO₂% of 50%-70% to maintain SaO₂ greater than 90%, trigger of 2, positive end-expiratory pressure (PEEP) of 5 cmH₂O, inspiration ratio of 1:2 s, and inspiratory flow of 15 L/min and maximum of 30 L/min.

3. Placement of the thermodilution catheter and measurement of cardiac output

1. Keep the animal in the dorsal position under general anesthesia and perform antisepsis of the cervical region with iodopovidone and alcohol, three times each (Figure 2). Make a 10 cm paramedian incision using an electrocautery pencil and dissect the subcutaneous tissue to expose the right external jugular vein by blunt dissection.
2. Place two 2-0 silk sutures, one at the distal portion and the other at the proximal portion of the dissected vessel (Figure 3).
3. Insert the catheter extracorporeally from the neck site to the thoracic region where the heart is located. Measure the insertion depth using markings on the catheter to reach the pulmonary artery (PA). Ligate the distal portion of the vessel and place a double loop in the proximal portion to secure the catheter once inserted.
4. Make a 2 mm transverse incision on the ventral portion of the vessel using iris scissors. Open the edges of the incision with Halsted's mosquito hemostatic forceps and insert the 5Fr thermodilution catheter into the right jugular vein (Figure 4, Figure 5, and Figure 6). Direct the catheter towards the pulmonary artery (PA) by following the curves displayed on the monitor.

4. Placement of the arterial catheter

1. Once the vein is dissected and reference sutures are placed, displace the sternocephalic muscle (equivalent to the sternocleidomastoid) laterally.
2. Dissect the pretracheal (sternohyoid) musculature until the carotid artery is exposed.
3. Cannulate the carotid artery similar to the jugular vein and connect it to the pressure transducer for monitoring the systemic arterial pressure.

5. Evaluation

1. Once the thermodilution catheter is placed in the right jugular vein and the arterial catheter is placed in the carotid artery on the same side, take samples for blood gas analysis.
2. Obtain the blood gas values and evaluate cardiac output (CO) using the thermodilution method, body surface area, and Fick's method.
   NOTE: For detailed procedures, please refer to previously published reports^19-21.

6. Statistical analysis

1. Analyze data demonstrating a normal distribution using analysis of variance (ANOVA) and perform Tukey's post hoc test. Express values as the mean ± standard error. Consider p values <0.05 as indicating statistical significance.

7. Thermodilution measurement

1. Inject a 5 mL bolus of cold SS at 4 °C into the proximal lumen of the thermodilution catheter in less than 4 s.
2. Observe the thermodilution curve (temperature/time) on the monitor screen. The curve should show a rapid ascent followed by a smooth and gradual descent to the baseline, with numerical values displayed with one or two decimal places.
3. Repeat the bolus injection process with two additional boluses of cold SS until the curves are valid, similar, and within 10% of the average value.
4. After confirming the validity and similarity of the curves, calculate the average of the three values and record it as the final CO value in liters per minute. Obtain CO and other indices from the thermodilution curve using calculations based on the Stewart-Hamilton equation²¹.

8. Determining adjusted cardiac output for body surface area (BSA) or cardiac index

1. To determine the adjusted cardiac output (CI), calculate the body surface area (BSA) using the DuBois-DuBois formula¹⁹:
   BSA = 0.007184 × (Height (cm)^0.725) × (Weight (kg)^0.425).
2. Once BSA is obtained, calculate the CI using the formula²⁰:
   CI = CO/BSA.
   NOTE: CO is determined in step 7.

9. Estimating cardiac output by the Fick's method

1. To calculate cardiac output (CO) using the Fick's method, determine the oxygen consumption (VO₂) and the difference in oxygen levels obtained from arterial (SaO₂) and venous (SvO₂) blood gases. Calculate VO₂ using the formula²¹:
   VO₂ = CO x (SaO₂ - SvO₂).
2. Then, determine cardiac output using the formula²¹:
   CO = VO₂ / ([SaO₂ - SvO₂] × 10).

10. Estimating cardiac output per body weight

1. Determine the cardiac output per bodyweight of the animals following previous reports^8,15.
   NOTE: In the EVLP protocol, various groups have reported that the estimated cardiac output (CO) per body weight in pigs is 100 mL/kg^8,15.

11. Euthanasia

1. Euthanize all animals with an overdose of sodium pentobarbital (150 mg/kg/IV) via the jugular vein sheath (following institutionally approved protocols) once all measurements are completed.
2. Continue general anesthesia and cardiac monitoring until the electrocardiography (ECG) trace shows no cardiac electrical activity^17,18.

Results

All animals survived the surgical procedure and the study time. One animal (4.3%) developed a jugular vein tear due to excessive traction during catheter insertion. Furthermore, none of the intervened vessels showed bleeding. In the studied animals, an average of 25-30 cm of catheter insertion was required to reach the PA. In three cases (13%), the catheter was directed towards the right upper limb of the pig. In these cases, the catheter was retracted to the insertion site, the pig's upper limb was repositioned towa...

Discussion

EVLP in pigs has a direct translation to human clinical practice, given the comparability in the size, physiology, and genomic sequence of the two species²². According to the EVLP protocol selected by the researcher, the measurement of CO is essential for determining the flow required to perfuse the lungs. Moreover, depending on the resources and knowledge available, the appropriate method can be chosen. However, no study has compared the methods for evaluating CO simultaneously against a referenc...

Materials

Name	Company	Catalog Number	Comments
Anesthesia machine	General Electric	Carescape 620
Atropine	Amixteria, Stern Pharma GmbH
Catheter Insyte Autoguard 20 GA	Becton Dickinson	381434
Electrocautery pencil	BBraun Aesculap	GN211
Endotracheal tube with a 7 Fr balloon	Rush	MG 027770 002
Fentanyl	Janssen-Cilag
Iodopovidone	Degasa	NDC6732635208
Laryngoscope	Riester
Lidocaine Spray	Pisa
Pressure transducers	Edwards Lifesciences	PX260
Propofol	Pisa
Sevofluorane	Pisa
Silk sutures 2-0	Covidien	GS833
Sodium pentobarbital	Pfizer
straight blade of laryngoscope #3	Miller; Riester
Swan-Ganz 5Fr thermodilution catheter	Arrow Thermodilution Ballon Catheter	Ref AI-07165
Tiletamine-zolazepam	Virbac
Vecuronium bromide	Pisa