<p class="jove_step">A. Propagate the virus in the C6/36 cell line.</p>
<ol>
<li>Cells grow to 80% confluency in 75 cm<sup>2</sup> flask;</li>
<li>Remove the media with 3-4 ml remaining in the flask;</li>
<li>Take 0.5 ml stock virus and add into the above cell with the multiplicity of infection of 1.5 virus particles per cell. Shaking the flask for 15 minutes slowly at the room temperature.</li>
<li>Incubate for 45 minutes at 5% CO<sub>2</sub> and 37&deg;C</li>
<li>Add 30 ml media, and incubate for 5 days.</li>
</ol>
<p class="jove_step">B. Prepare the mixture of virus and blood</p>
<ol>
<li>Detach the cell with the scraper and transfer the cell and media to the 50 mL conical tubes;</li>
<li>Centrifugate at 800g for 10 minutes; collect the supernatant, but leave 1ml of supernatant with the cell pellet;</li>
<li>Freeze the above cell pellet&nbsp; in dry CO<sub>2</sub> and then thaw in 37&deg;C water bath, repeat two to three times;</li>
<li>Centrifugate at 800g for 10 minutes, take the supernatant, and combine with the supernatant collected from step 3;</li>
<li>Collect whole human blood with the same procedure (step 3) for preparation of gametocyte culture to infect Anopheles mosquito with Plasmodium falciparum;</li>
<li>Combine the equal amount of the above whole human blood with virus supernatant from step 4, and add human serum (10% of the whole volume). </li>
<li>Incubate the above mixture of human blood and dengue virus for 30 minutes at 37&deg;C water bath</li>
</ol>
<p class="jove_step">C. Feeding mosquitoes</p>
<p class="jove_content">This procedure is almost identical to what have been described in the section for <em>Plasmodium falciparum</em> infections in mosquitoes. We assay the midgut infection at day 7, and the salivary infection at day 14 after blood-feeding. All material that came in contact with the virus are treated first with 75% ethanol and then with 10% bleach.</p>
<p class="jove_step">D. Assay the virus titer in mosquito tissue</p>
<ol>
<li>Two or three days before dissection of mosquito tissue, grow C6/36 cell in a 24 well plate such that the cell reach 80% confluency at the day when the assay is conducted; </li>
<li>Mosquitoes are anesthetized at 4&deg;C, sacrificed and surfaced sterile by soaking them in 75% ethanol for 1 minute. Then mosquitoes were washed with sterile water twice before dissection of midgut or salivary gland under the dissecting microscope. From this step, all the procedure below needs to be conducted in a sterile environment such as a biological safety cabinet. These tissues are transferred to a tube containing 150 &micro;l media and homogenized with a Kontes pellet pestle motor for 90 seconds; </li>
<li>Make a 1:100 dilution by adding 10 &micro;l of the homogenate into 990 &micro;l media; </li>
<li>Make further 1: 10, 1:100 and 1:1000 dilution with the medium in the 96 well plate; </li>
<li>Remove the media in the 24 well plate, and add 100 &micro;l of each of the above four dilutions to each corresponding well; </li>
<li>Shake the plate slowly for 15 minutes at the room temperature, then incubate for 45 minutes at 5% CO<sub>2</sub> and 37&deg;C; </li>
<li>Add 1ml of methycellulose overlay (1%) to each well; </li>
<li>Incubate plates at 37&deg;C with 5% CO<sub>2</sub> for 5 days; </li>
<li>The steps from here on do not require a sterile environment but as with any other pathogen care should be taken at all times. Discard methycellulose overlay from each plate and blot to remove excess media </li>
<li>Add 1ml of methanol/acetone fixative (1:1) to each well. Keep at 4&deg;C for 1 hr; </li>
<li>Pour off the fixative, and wash once with 1X PBS; </li>
<li>Make 1:1000 dilution to the primary antibody against the virus with 5% blotto; </li>
<li>Add 200 &micro;l of diluted hyperimmune fluid to each well, incubate at 37&deg;C for 1 hr; </li>
<li>Remove hyperimmune fluid and wash plate with 1 X PBS </li>
<li>Prepare a 1:1000 dilution of goat anti-mouse conjugate (KPL Cat# 074-1806) in 5% blotto (5g powdered skim milk in 100 ml of 1 X PBS), and then add 200 &micro;l to each well, and incubate at 37&deg;C for 1 hr; </li>
<li>Prepare substrate as follows: add 1 tablet of 3'-Diaminobenzidine terrahydrochloride (Sigma Cat# D5905) in 20 ml of 1 X PBS, after dissolved, and then add 8 &micro;l of 30% hydrogen peroxidase </li>
<li>Add 200 &micro;l of the above substrate to each well. Let stand at room temperature for 10 minutes </li>
<li>Remove substrate and stop reaction by adding 1ml of distilled water to each well </li>
<li>Pour off water and blot plates to dry </li>
<li>Count the virus particle </li>
</ol>

<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en" lang="en">	
		
		<div>
		<table border="1">
		<thead>
		<tr>
		<th>Material Name</th>
		<th>Type</th>
		<th>Company</th>
		<th>Catalogue Number</th>
		<th>Comment</th>
		</tr>
		</thead>
		<tbody>
		
<tr>
<td>Incubator</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<td>with 5% CO2, 37oC</td>
</tr>
<tr>
<td>50 mL conical tubes</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<td>plastic</td>
</tr>
<tr>
<td>human serum and blood</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<td>O+</td>
</tr>
<tr>
<td>pipette tip</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<td>for tissue culture </td>
</tr>
<tr>
<td>pipettman</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<tr>
<td>Pasteur pipetts</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<td>glass, sterile</td>
</tr>
<tr>
<td>water bath</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<td>37C</td>
</tr>
<tr>
<td>centrifuge</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<tr>
<td>parafilm</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<tr>
<td>circulating water bath</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<tr>
<td>glass membrane feeders</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<td>with rubber tubing to fit feeders</td>
</tr>
<tr>
<td>mosquito cups</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<tr>
<td>75% ethanol</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<tr>
<td>10% bleach</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<tr>
<td>Tissue-culture plates</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<td>6-well, 24-well and 96-well plates</td>
</tr>
<tr>
<td>Petri dish</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<td>glass</td>
</tr>
<tr>
<td>Slides</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<tr>
<td>fine-tip forceps</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<tr>
<td>PBS</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<td>1X, sterile</td>
</tr>
<tr>
<td>dissecting microscope</td>
<td>Microscope</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<tr>
<td>C6/36 cells</td>
<td>cells</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<td>For virus propagation</td>
</tr>
<tr>
<td>C6/36 medium</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<td>MEM with 10% heat inactivated FBS, 1% L-glutamine and non-essential amino acid and 1% (v/v) Penicillin-Streptomycin.</td>
</tr>
<tr>
<td>3&#x2019;-Diaminobenzidine terrahydrochloride</td>
<td>&nbsp;</td>
<td>Sigma</td>
<td>D5905</td>
<td>1 tablet in 20 ml of 1 X PBS, dissolve and then add 8 &#181;l of 30% hydrogen peroxidase</td>
</tr>
<tr>
<td>30% hydrogen peroxidase</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<tr>
<td>A. aegypti</td>
<td>Animal</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<td>mosquito</td>
</tr>		</tbody>
		</table>
		</div>
	

protocol for dengue infections in mosquitoes (a. aegypti) and infection phenotype determination

The purpose of this procedure is to infect the Aedes mosquito with dengue virus in a laboratory condition and examine the infection level and dynamic of the virus in the mosquito tissues. This protocol is routinely used for studying mosquito-virus interactions, especially for identification of novel host factors that are able to determine vector competence. The entire experiment must be conducted in a BSL2 laboratory. Similar to Plasmodium falciparum infections, proper attire including gloves and lab coat must be worn at all times. After the experiment, all the materials that came in contact with the virus need to be treated with 75% ethanol and bleached before proceeding with normal washing. All other materials need to be autoclaved before discarding them.

Watch this Scientific Journal Video about Protocol for Dengue Infections in Mosquitoes A. aegypti and Infection Phenotype Determination at JoVE.com

Protocol for Dengue Infections in Mosquitoes A. aegypti and Infection Phenotype Determination

<p class="jove_content">Once a gene is identified as potentially refractory for the dengue virus, it must be evaluated for it's role in preventing viral infections within the mosquito.    This protocol illustrates how the extent of dengue infections of mosquitoes can be assayed.  The techniques for growing up the virus in culture, membrane feeding mosquitoes human blood, and assaying viral titers in the mosquito midgut are demonstrated.</p>

Protocol for Dengue Infections in Mosquitoes (A. aegypti) and Infection Phenotype Determination

The purpose of this procedure is to infect the Aedes mosquito with dengue virus in a laboratory condition and examine the infection level and dynamic of ...

protocol-for-dengue-infections-mosquitoes-aegypti-infection-phenotype

Research

JoVE Journal

Biology

17.4K Views.  Johns Hopkins University. Once a gene is identified as potentially refractory for the dengue virus, it must be evaluated for it's role in preventing viral infections within the mosquito. This protocol illustrates how the extent of dengue infections of mosquitoes can be assayed. The techniques for growing up the virus in culture, membrane feeding mosquitoes human blood, and assaying viral titers in the mosquito midgut are demonstrated.