Die Autoren erkennen Peter Jonosson und Lyon New Media Centre für den 3D-Druck der Kammern. Diese Forschung wurde durch 436100-2013 RGPIN, ER15-11-123 und der McMaster Dekan des Engineering Excellence Undergraduate Sommer Research Award Programms Undergraduate Research Möglichkeiten unterstützt.

<ol>
	<li>Tremblay, J. -. F. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+rise+of+OLED+displays.">The rise of OLED displays.</a> Chemical &amp; Engineering News. 94 (28), 30-34 (2016).</li><li>Kang, H., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Bulk-Heterojunction+Organic+Solar+Cells:+Five+Core+Technologies+for+Their+Commercialization.">Bulk-Heterojunction Organic Solar Cells: Five Core Technologies for Their Commercialization.</a> Advanced Materials. 28 (36), 7821-7861 (2016).</li><li>Jacoby, M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+future+of+low-cost+solar+cells.">The future of low-cost solar cells.</a> Chemical &amp; Engineering News. 94 (18), 30-35 (2016).</li><li>Veldhuis, S. A., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Perovskite+Materials+for+Light-Emitting+Diodes+and+Lasers.">Perovskite Materials for Light-Emitting Diodes and Lasers.</a> Advanced Materials. 28 (32), 6804-6834 (2016).</li><li>Park, N. -. G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Perovskite+solar+cells:+an+emerging+photovoltaic+technology.">Perovskite solar cells: an emerging photovoltaic technology.</a> Materials Today. 18 (2), 65-72 (2015).</li><li>Turak, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Interfacial+degradation+in+organic+optoelectronics.">Interfacial degradation in organic optoelectronics.</a> RSC Advances. 3 (18), 6188 (2013).</li><li>Scholz, S., Kondakov, D., L&#252;ssem, B., Leo, K. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Degradation+Mechanisms+and+Reactions+in+Organic+Light-Emitting+Devices.">Degradation Mechanisms and Reactions in Organic Light-Emitting Devices.</a> Chemical Reviews. 115 (16), 8449-8503 (2015).</li><li>J&#248;rgensen, M., Norrman, K., Gevorgyan, S. A., Tromholt, T., Andreasen, B., Krebs, F. C. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Stability+of+Polymer+Solar+Cells.">Stability of Polymer Solar Cells.</a> Advanced Materials. 24 (5), 580-612 (2012).</li><li>Habisreutinger, S. N., McMeekin, D. P., Snaith, H. J., Nicholas, R. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Research+Update:+Strategies+for+improving+the+stability+of+perovskite+solar+cells.">Research Update: Strategies for improving the stability of perovskite solar cells.</a> APL Materials. 4 (9), 091503 (2016).</li><li>Reese, M. O., Sigdel, A. K., Berry, J. J., Ginley, D. S., Shaheen, S. E. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+simple+miniature+controlled-atmosphere+chamber+for+optoelectronic+characterizations.">A simple miniature controlled-atmosphere chamber for optoelectronic characterizations.</a> Solar Energy Materials and Solar Cells. 94 (7), 1254-1258 (2010).</li><li>Gevorgyan, S. A., Jorgensen, M., Krebs, F. C. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+setup+for+studying+stability+and+degradation+of+polymer+solar+cells.">A setup for studying stability and degradation of polymer solar cells.</a> Solar Energy Materials and Solar Cells. 92 (7), 736-745 (2008).</li><li>Park, J. -. S. S., Chae, H., Chung, H. K., Lee, S. I. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Thin+film+encapsulation+for+flexible+AM-OLED:+a+review.">Thin film encapsulation for flexible AM-OLED: a review.</a> Semiconductor Science and Technology. 26 (3), 034001 (2011).</li><li>Ahmad, J., Bazaka, K., Anderson, L. J., White, R. D., Jacob, M. V. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Materials+and+methods+for+encapsulation+of+OPV:+A+review.">Materials and methods for encapsulation of OPV: A review.</a> Renewable &amp; Sustainable Energy Reviews. 27, 104-117 (2013).</li><li>Gevorgyan, S. A., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Round+robin+performance+testing+of+organic+photovoltaic+devices.">Round robin performance testing of organic photovoltaic devices.</a> Renewable Energy. 63, 376-387 (2014).</li><li>Osterwald, C. R., Hammond, R., Zerlaut, G., D'Aiello, R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Photovoltaic+module+certification+and+laboratory+accreditation+criteria+development.">Photovoltaic module certification and laboratory accreditation criteria development.</a> Solar Energy Materials and Solar Cells. 41, 629-636 (1996).</li><li>Turak, A., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Systematic+analysis+of+processing+parameters+on+the+ordering+and+performance+of+working+poly(3-hexyl-thiophene):[6,6]-phenyl+C(61)-butyric+acid+methyl+ester+solar+cells.">Systematic analysis of processing parameters on the ordering and performance of working poly(3-hexyl-thiophene):[6,6]-phenyl C(61)-butyric acid methyl ester solar cells.</a> Journal of Renewable and Sustainable Energy. 2 (5), 53103 (2010).</li><li>Qi, B., Wang, J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Fill+factor+in+organic+solar+cells.">Fill factor in organic solar cells.</a> Physical Chemistry Chemical Physics. 15 (23), 8972-8982 (2013).</li><li>Lu, N., Li, L., Sun, P., Liu, M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Short-circuit+current+model+of+organic+solar+cells.">Short-circuit current model of organic solar cells.</a> Chemical Physics Letters. 614, 27-30 (2014).</li><li>Qi, B., Wang, J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Open-circuit+voltage+in+organic+solar+cells.">Open-circuit voltage in organic solar cells.</a> Journal of Materials Chemistry. 22 (46), 24315-24325 (2012).</li><li>Xue, J., Uchida, S., Rand, B. P., Forrest, S. R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=4.2%+efficient+organic+photovoltaic+cells+with+low+series+resistances.">4.2% efficient organic photovoltaic cells with low series resistances.</a> Applied Physics Letters. 84 (16), 3013-3015 (2004).</li><li>Hauch, J. A., Schilinsky, P., Choulis, S. A., Rajoelson, S., Brabec, C. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+impact+of+water+vapor+transmission+rate+on+the+lifetime+of+flexible+polymer+solar+cells.">The impact of water vapor transmission rate on the lifetime of flexible polymer solar cells.</a> Applied Physics Letters. 93 (10), 103306 (2008).</li><li>Norrman, K., Madsen, M. V., Gevorgyan, S. A., Krebs, F. C. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Degradation+Patterns+in+Water+and+Oxygen+of+an+Inverted+Polymer+Solar+Cell.">Degradation Patterns in Water and Oxygen of an Inverted Polymer Solar Cell.</a> Journal of the American Chemical Society. 132 (47), 16883-16892 (2010).</li><li>Dameron, A. A., Reese, M. O., Moriconie, T. J., Kempe, M. D. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Understanding+Moisture+Ingress+and+Packaging+Requirements+for+Photovoltaic+Modules.">Understanding Moisture Ingress and Packaging Requirements for Photovoltaic Modules.</a> Photovoltaics International. 5, 121-130 (2009).</li><li>Standard Test Method for Water Vapor Transmission Rate of Sheet Materials Using Dynamic Relative Humidity Measurement. ASTM E398 - 13 Available from: <a target="_blank" href="https://www.astm.org/Standards/E398">https://www.astm.org/Standards/E398</a> (2013)</li><li>Basha, R. K., Konno, K., Kani, H., Water Kimura, T. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Water+Vapor+Transmission+Rate+of+Biomass+Based+Film+Materials.">Water Vapor Transmission Rate of Biomass Based Film Materials.</a> Engineering in Agriculture, Environment and Food. 4 (2), 37-42 (2011).</li><li>Kim, N., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+correlation+study+between+barrier+film+performance+and+shelf+lifetime+of+encapsulated+organic+solar+cells.">A correlation study between barrier film performance and shelf lifetime of encapsulated organic solar cells.</a> Solar Energy Materials and Solar Cells. 101, 140-146 (2012).</li><li>Reese, M. O., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Pathways+for+the+degradation+of+organic+photovoltaic+P3HT:+PCBM+based+devices.">Pathways for the degradation of organic photovoltaic P3HT: PCBM based devices.</a> Solar Energy Materials and Solar Cells. 92 (7), 746-752 (2008).</li><li>Kempe, M. D., Reese, M. O., Dameron, A. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Evaluation+of+the+sensitivity+limits+of+water+vapor+transmission+rate+measurements+using+electrical+calcium+test.">Evaluation of the sensitivity limits of water vapor transmission rate measurements using electrical calcium test.</a> Review of Scientific Instruments. 84 (2), 025109 (2013).</li><li>Reese, M. O., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Consensus+stability+testing+protocols+for+organic+photovoltaic+materials+and+devices.">Consensus stability testing protocols for organic photovoltaic materials and devices.</a> Solar Energy Materials and Solar Cells. 95 (5), 1253-1267 (2011).</li><li>. Current landscape of standardisation efforts in organic and printed electronics 2015 - a VAMAS review Available from: <a target="_blank" href="https://www.researchgate.net/publication/278035615_Current_landscape_of_standardisation_efforts_in_organic_and_printed_electronics_2015_-_a_VAMAS_review">https://www.researchgate.net/publication/278035615_Current_landscape_of_standardisation_efforts_in_organic_and_printed_electronics_2015_-_a_VAMAS_review</a> (2015)</li></ol>

Die Autoren haben nichts preisgeben.

Die entscheidenden Schritte in neu zu diesem Experiment beinhalten den Druck von den Kammern zu vermeiden Risse, Lücken oder schlechten in-Fill-Eigenschaften die Metallbeschichteten, Abdichtung der Kammer um ein Eindringen von Feuchtigkeit und Sauerstoff zu verhindern durch anziehen KF50 Klemme zu verringern kann eine vollständige Abdichtung zwischen den oberen und unteren Kammern, mit einer Vakuum-bewertete Niederdruck Epoxy um die Kontaktstifte oder irgendwelche Durchführungen um zu verhindern, undicht, und erstelle...

Organische und Perowskit optoelektronische Geräte, Solarzellen und Leuchtdioden aufgrund konjugierte π halbleitenden organischen Molekülen und Organometall Halogenide sind ein schnell wachsendes Forschungsgebiet. Organische Leuchtdioden (OLEDs) sind bereits ein Hauptelement technologische Beleuchtung zeigt1und organische Photovoltaik haben damit begonnen, Effizienzsteigerungen zu erzielen, die sie im Wettbewerb mit amorphem Silizium2machen. Die jüngste rasante Weiterentwicklung von Perowskit-basierten Geräten für Licht absorbieren und Licht emittierende Anwendungen3,4,5 legt nahe, dass kostengünstige, leicht verarbeitete Geräte wahrscheinlich bald weit verbreitet zu finden sind Bereitstellung. Allerdings leiden alle diese Technologien eine Empfindlichkeit, atmosphärische Verunreinigungen, insbesondere Feuchtigkeit und Sauerstoff, die ihre effektive Lebensdauer6,7,8,9begrenzt.
Für Forscher studieren solcher Systeme kann es sinnvoll, eine anpassbare, einfach zu bedienende tragbare und wiederverwendbare Kammer solche empfindlichen Materialien zu schützen oder Verunreinigungen in einer kontrollierten Art und Weise10,11ausgesetzt sein. Obwohl es möglich, eine Glovebox zur Charakterisierung von luftempfindlichen Geräte zu verwenden, diese großen, teuren, und stationären, inerten Umgebungen unvereinbar mit der breiten Palette der Charakterisierung möglicherweise, die erforderlich sein können. Um eine tragbare alternative, Reese Et Al. liefern 10 vorgeschlagen, eine kleine Metall Kammer basiert auf einer standard Vakuum Flansch für die elektrischen und optischen Charakterisierung von organischen Geräte geeignet. Wir haben dieses Design angepasst, so dass es billiger und vielseitiger mithilfe von 3D-Druck, die Kammer Komponenten herzustellen. Die Verwendung der 3D-Druck, sondern als Bearbeitung, ermöglicht schnelle, kostengünstige Anpassungen an veränderte Muster oder Umweltanforderungen und gleichzeitig das Dienstprogramm des grundlegenden Designs. In diesem Beitrag wir erläutern das Verfahren, um eine solche Kammer machen und verwenden, um die Strom-Spannungs-Kennlinien eines organischen Dioden-Geräts zu extrahieren.
Eine gute Einkapselung von organischen und Perowskit Geräte sollten WVTRs von 10-3 - 10-6 g/m2/Tag für langfristige Gerät Stabilität12,13, zu wenig Wasser Eindringen in das organische Gerät gewährleisten auch in sehr harten Bedingungen. Da diese Kammer zu einer kontrollierten Umgebung zu Testzwecken Zwecke anstatt eine langfristige Lagerung oder Kapselung Methode konzipiert wurde, sind die Voraussetzungen für eine effektive Kammer nicht so streng. Die Kammer sollte weiterhin die Geräteeigenschaften innerhalb eines angemessenen Zeitrahmens Charakterisierung Experimente durchführen können. Das Standardverfahren der Verwendung von PLA resultiert in einer Kammer, die für mehrere Tage oder sogar verwendet werden können Wochen mit einer eingearbeiteten Gasfluss, ohne einen erheblichen Verlust von den Eigenschaften des Geräts.
Die Materialien zu verändern oder auch die Form und Größe des kammerkörpers können drastische Auswirkungen auf das Eindringen von Verunreinigungen aus der Luft in der Kammer. Das Eindringen von Feuchtigkeit und Sauerstoff muss daher sorgfältig überwacht werden, für jedes Design um die Wirksamkeit der Kammer bestimmen. Zusätzlich beschreiben wir, auf die Fertigung der Kammer, ein einfaches Verfahren zur Bestimmung der Metallbeschichteten der Kammer, mit einem im Handel erhältlichen Feuchtesensor, um einen Zeitrahmen für die Verwendung der Kammer für Experimente zu etablieren.
Eine einfache und doch vielseitige Kammer kann mehrere Arten von Experimenten durchgeführt werden. Sie fungieren als inerter Atmosphäre Umgebungen außerhalb der Glovebox, geeignet für elektrische und optische Charakterisierung durch die Durchführung der elektrischen Anschlüsse und Fenster. Ihre Beweglichkeit ermöglicht es ihnen, mit standard Elektrische Charakterisierung Ausrüstung außerhalb des Labors, wo sie hergestellt wurden, verwendet werden, die in Round-Robin für Zuverlässigkeit14 Tests nützlich ist oder zertifizierte Messungen des Gerätes zu erhalten Leistung15. Diese Räume eignen sich auch besonders für die Untersuchung der Auswirkungen der Einführung von Schadstoffen für kontrollierten Abbau Tests mit einfachen Modifikationen. Der Einsatz von 3D Druck ermöglicht eine signifikante und schnelle Anpassungsfähigkeit an wechselnden Gerät Layouts, Größen, oder Testanforderungen.

<table><tbody><tr><td>ORION DELTA DESKTOP 3D PRINTER RTP</td><td>SeeMeCNC</td><td>87999</td><td>&lt;strong&gt;Known in Report As:&lt;/strong&gt; 3D Printer</td></tr><tr><td>1.75 mm PLA Filament</td><td>SeeMeCNC</td><td>50241</td><td>&lt;strong&gt;Known in Report As:&lt;/strong&gt; PLA</td></tr><tr><td>Somos&amp;reg; WaterShed XC 11122 chamber</td><td>Somos</td><td>printed at Custom Prototypes, Toronto.</td><td>https://www.dsm.com/products/somos/en_US/products/offerings-somos-water-shed.html&lt;br/&gt; &lt;strong&gt;Known in Report As:&lt;/strong&gt; Water resistant polymer</td></tr><tr><td>CURA</td><td>CURA</td><td></td><td>https://ultimaker.com/en/products/cura-software&lt;br/&gt; &lt;strong&gt;Known in Report As:&lt;/strong&gt; slicing software</td></tr><tr><td>Soldering iron with 600&amp;deg; F tip</td><td>Weller</td><td>WTCPT</td><td></td></tr><tr><td>Xtralien X100 Source Measure Unit</td><td>Ossila</td><td>E561</td><td>&lt;strong&gt;Known in Report As:&lt;/strong&gt; SMU</td></tr><tr><td>ZIF Test Board for Pixelated Anode Substrates</td><td>Ossila</td><td>E221</td><td>&lt;strong&gt;Known in Report As:&lt;/strong&gt; Zero insetion force/ZIF Test Board;</td></tr><tr><td>BNC Cable</td><td></td><td></td><td></td></tr><tr><td>Generic USB A - B</td><td></td><td></td><td></td></tr><tr><td>Generic USB A - Micro</td><td></td><td></td><td></td></tr><tr><td>#12 O-Ring</td><td></td><td></td><td>Source unkown&lt;br/&gt; &lt;strong&gt;Known in Report As:&lt;/strong&gt; o-ring</td></tr><tr><td>116 Butyl O-Ring</td><td>Global Rubber Products</td><td>116 VI70</td><td>Bought in-store&lt;br/&gt; &lt;strong&gt;Known in Report As:&lt;/strong&gt; o-ring</td></tr><tr><td>Retaining ring</td><td>McMaster</td><td>NA</td><td>3D printed in-house</td></tr><tr><td>Bottom Chamber</td><td>McMaster</td><td>NA</td><td>3D printed in-house</td></tr><tr><td>Top Chamber</td><td>McMaster</td><td>NA</td><td>3D printed in-house</td></tr><tr><td>KF50 Cast Clamp (Aluminum)</td><td>Kurt J. Lesker</td><td>QF50-200-C</td><td></td></tr><tr><td>KF50 Centering Ring (Aluminum)</td><td>Kurt J. Lesker</td><td>QF50-200-BRB</td><td></td></tr><tr><td>Sn60/Pb40 Solder</td><td>MG Chemicals</td><td>4895-2270</td><td></td></tr><tr><td>#4-40 x 3/16&quot; machine screw</td><td></td><td></td><td>Hardware store</td></tr><tr><td>#4-40 IntThrd Brass TaperSingleVane Insert For Thermoplastic</td><td>Fastenal</td><td>11125984</td><td>Fastenal requires to be affiliated with company/university&lt;br/&gt; &lt;strong&gt;Known in Report As:&lt;/strong&gt; #4-40 brass tapered threaded insert</td></tr><tr><td>Varian Torr Seal Vacuum Equipment High Vacuum Epoxy</td><td>Vacuum Products Canada Inc.</td><td></td><td>&lt;strong&gt;Known in Report As:&lt;/strong&gt; low-pressure epoxy</td></tr><tr><td>Smiths Interconnect/IDI Contact Probes HEADED RADIUS</td><td>Mouser Electornics</td><td>818-S-100-D-3.5-G</td><td>&lt;strong&gt;Known in Report As:&lt;/strong&gt; pogo pin</td></tr><tr><td>Smiths Interconnect/IDI Contact Probes Receptacle Solder Cup</td><td>Mouser Electornics</td><td>818-R-100-SC</td><td>&lt;strong&gt;Known in Report As:&lt;/strong&gt; solder cup</td></tr><tr><td>1/4&quot; Teflon Tubing</td><td></td><td></td><td>Hardware store</td></tr><tr><td>Teflon tape</td><td></td><td></td><td>Hardware store</td></tr><tr><td>1/4&quot; Tube x 1/8&quot; Male NPT Nickel Plated Brass Push-to-Connect Connector</td><td>Fastenal</td><td>442064</td><td>Not the same ones used for this study, but are fuctionally equivalent&lt;br/&gt; &lt;strong&gt;Known in Report As:&lt;/strong&gt; push-to-connect pneumatic connector</td></tr><tr><td>1/8&quot; NPT Tap and T-wrench</td><td></td><td></td><td>Hardware store</td></tr><tr><td>1/4&quot; Tube Push-to-Connect Manually Operated Valves</td><td>Fluidline</td><td>7910-56-00</td><td>&lt;strong&gt;Known in Report As:&lt;/strong&gt; manually operated push-to-connect valves</td></tr><tr><td>Adafruit DHT22 Humidity Sensor (small)</td><td>Digi-Key</td><td>385</td><td>&lt;strong&gt;Known in Report As:&lt;/strong&gt; internal humidity sensor</td></tr><tr><td>Adafruit DHT22 Humidity Sensor (large)</td><td>Digi-Key</td><td></td><td>&lt;strong&gt;Known in Report As:&lt;/strong&gt; external humidity sensor</td></tr><tr><td>Arduino Uno</td><td>Arduino</td><td></td><td></td></tr><tr><td>Glovebox environment</td><td></td><td></td><td></td></tr><tr><td>10 kOhm Resistor</td><td></td><td></td><td></td></tr><tr><td>Oscilla Xtralien Scientific Python IDE</td><td>Oscilla</td><td></td><td>https://www.ossila.com/pages/xtralien-scientific-python&lt;br/&gt; &lt;strong&gt;Known in Report As:&lt;/strong&gt; Python IDE</td></tr></tbody></table>

a 3d-printed chamber for organic optoelectronic device degradation testing

In diesem Manuskript skizzieren wir die Herstellung einer kleinen, tragbaren, einfach zu bedienende atmosphärischen Kammer für organische und Perowskit optoelektronische Geräte mit 3D-Druck. Da diese Art von Geräten empfindlich gegenüber Feuchtigkeit und Sauerstoff sind, kann solch eine Kammer Forscher bei der Charakterisierung der elektronischen und Stabilität Eigenschaften unterstützen. Die Kammer soll als eine temporäre, wiederverwendbare und stabile Umgebung mit kontrollierten Eigenschaften (einschließlich Feuchtigkeit, Gas-Einführung und Temperatur) verwendet werden. Es kann verwendet werden, um luftempfindliche Materialien zu schützen oder in einer kontrollierten Weise für Abbau Studien Verunreinigungen ausgesetzt. Um die Eigenschaften der Kammer zu charakterisieren, skizzieren wir ein einfaches Verfahren um die Wasserdampf-Übertragungsrate (Metallbeschichteten) mit Relative Luftfeuchtigkeit gemessen an einem standard Feuchtesensor zu bestimmen. Dieses Standardverfahren, mit einer 50 %-Infill-Dichte von Polymilchsäure (PLA), resultiert in einer Kammer, die wochenlang ohne erheblichen Verlust der Eigenschaften des Geräts verwendet werden kann. Die Vielseitigkeit und Benutzerfreundlichkeit der Kammer ermöglicht es, jede Charakterisierung Bedingung angepasst werden, die eine kompakte kontrollierter Atmosphäre erfordert.

Strom-Spannungs-Messungen:
Diese Kammer ist so konstruiert für das Testen einer luftempfindlichen Diode-Geräts, z. B. einer organischen oder Perowskit Solarzelle oder eine Leuchtdiode zu ermöglichen. Es kann als eine wiederverwendbare, temporäre Kapselung oder als Methode zur Einführung von Verunreinigungen zum kontrollierten Abbau Tests ausführen fungieren. Die Stromdichte-Spannung (JV) Kurven, die hier g...

Watch this Scientific Journal Video about A 3D-printed Chamber for Organic Optoelectronic Device Degradation Testing at JoVE.com

A 3D-printed Chamber for Organic Optoelectronic Device Degradation Testing

Hier präsentieren wir Ihnen ein Protokoll für das Design, die Herstellung und die Verwendung einer einfachen, vielseitigen 3D-gedruckten und kontrollierten atmosphärischen Kammer für die optische und elektrische Charakterisierung von luftempfindlichen organischen optoelektronischen Geräten.

Ein 3D-gedruckten Kammer für organische opto-elektronischen Gerät Abbau testen

In this manuscript, we outline the manufacture of a small, portable, easy-to-use atmospheric chamber for organic and perovskite optoelectronic devices, ...

a-3d-printed-chamber-for-organic-optoelectronic-device-degradation

Research

JoVE Journal

Engineering

7.9K Aufrufe.  McMaster University. Hier präsentieren wir Ihnen ein Protokoll für das Design, die Herstellung und die Verwendung einer einfachen, vielseitigen 3D-gedruckten und kontrollierten atmosphärischen Kammer für die optische und elektrische Charakterisierung von luftempfindlichen organischen optoelektronischen Geräten.

Serie: A 3D-printed Chamber for Organic Optoelectronic Device Degradation Testing

Blue-hazard-free Candlelight OLED

A candlelight-style organic light emitting diode (OLED) is a human-friendly type of lighting because it is blue-hazard-free and has a low correlated color temperature (CCT) illumination. The low CCT lighting is deprived of high-energy blue radiation, and it can be used for a longer duration before causing retinal damage. This work presents the comprehensive protocols for the fabrication of blue-hazard-free candlelight OLEDs. The emission spectrum of the OLED was characterized by the maximum exposure time limit of the retina and the melatonin suppression sensitivity. The devices can be fabricated using dry and wet processes. The dry-processed OLED resulted in a CCT of 1,940 K and exhibited a maximum retinal exposure limit of 1,287 s at a brightness of 500 lx. It showed 2.61% melatonin suppression sensitivity relative to 480 nm blue light. The wet-processed OLED, where the spin coating is used to deposit hole injection, hole transport, and emissive layers, making fabrication fast and economical, produced a CCT of 1,922 K and showed a maximum retinal exposure limit of 7,092 at a brightness of 500 lx. The achieved relative melatonin suppression sensitivity of 1.05% is 86% and 96% less than that of the light emitting diode (LED) and compact fluorescent lamp (CFL), respectively. Wet-processed blue-hazard-free candlelight OLED exhibited a power efficiency of 30 lm/W, which is 2 times that of the incandescent bulb and 300 times that of the candle.

We present a protocol for the fabrication of a blue-hazard-free candlelight organic light emitting diode (OLED) for eye protection and melatonin secretion.

Blau-gefährdungsfreie Candlelight OLED

A candlelight-style organic light emitting diode (OLED) is a human-friendly type of lighting because it is blue-hazard-free and has a low correlated color ...

Forschung

Ingenieurwesen

Fabrication and Testing of Photonic Thermometers

In recent years, a push for developing novel silicon photonic devices for telecommunications has generated a vast knowledge base that is now being leveraged for developing sophisticated photonic sensors. Silicon photonic sensors seek to exploit the strong confinement of light in nano-waveguides to transduce changes in physical state to changes in resonance frequency. In the case of thermometry, the thermo-optic coefficient, i.e., changes in refractive index due to temperature, causes the resonant frequency of the photonic device such as a Bragg grating to drift with temperature. We are developing a suite of photonic devices that leverage recent advances in telecom compatible light sources to fabricate cost-effective photonic temperature sensors, which can be deployed in a wide variety of settings ranging from controlled laboratory conditions, to the noisy environment of a factory floor or a residence. In this manuscript, we detail our protocol for the fabrication and testing of photonic thermometers.

We describe the process of fabrication and testing of photonic thermometers.

Herstellung und Prüfung von photonischen Thermometer

In recent years, a push for developing novel silicon photonic devices for telecommunications has generated a vast knowledge base that is now being ...

Chemie

Production and Characterization of Vacuum Deposited Organic Light Emitting Diodes

A method for producing simple and efficient thermally-activated delayed fluorescence organic light-emitting diodes (OLEDs) based on guest-host or exciplex donor-acceptor emitters is presented. With a step-by-step procedure, readers will be able to repeat and produce OLED devices based on simple organic emitters. A patterning procedure allowing the creation of personalized indium tin oxide (ITO) shape is shown. This is followed by the evaporation of all layers, encapsulation and characterization of each individual device. The end goal is to present a procedure that will give the opportunity to repeat the information presented in cited publication but also using different compounds and structures in order to prepare efficient OLEDs.

A protocol for the production of simple structured organic light-emitting diodes (OLEDs) is presented.

Herstellung und Charakterisierung des Vakuums hinterlegt organische Leuchtdioden

A method for producing simple and efficient thermally-activated delayed fluorescence organic light-emitting diodes (OLEDs) based on guest-host or exciplex ...

Luminescence Lifetime Imaging of O2 with a Frequency-Domain-Based Camera System

We describe a method to image dissolved oxygen (O2), in 2D at high spatial (&#60; 50-100 &#181;m) and temporal (&#60; 10 s) resolution. The method employs O2 sensitive luminescent sensor foils (planar optodes) in combination with a specialized camera system for imaging luminescence lifetime in the frequency-domain. Planar optodes are prepared by dissolving the O2-sensitive indicator dye in a polymer and spreading the mixture on a solid support in a defined thickness via knife coating. After evaporation of the solvent, the planar optode is placed in close contact with the sample of interest - here demonstrated with the roots of the aquatic plant Littorella uniflora. The O2 concentration-dependent change in the luminescence lifetime of the indicator dye within the planar optode is imaged via the backside of the transparent carrier foil and aquarium wall using a special camera. This camera measures the luminescence lifetime (&#181;s) via a shift in phase angle between a modulated excitation signal and emission signal. This method is superior to luminescence intensity imaging methods, as the signal is independent of the dye concentration or intensity of the excitation source, and solely relies on the luminescence decay time, which is an intrinsically referenced parameter. Consequently, an additional reference dye or other means of referencing are not needed. We demonstrate the use of the system for macroscopic O2 imaging of plant rhizospheres, but the camera system can also easily be coupled to a microscope.

Luminescence Lifetime Imaging of O2 with a Frequency-Domain-Based Camera System

We describe the use of a novel, frequency-domain luminescence lifetime camera for mapping 2D O2 distributions with optical sensor foils. The camera system and image analysis procedures are described along with the preparation, calibration and application of sensor foils for visualizing the O2 microenvironment in the rhizosphere of aquatic plants.

Lumineszenz-Lebensdauer-Bildgebung von O2 mit einem Frequency-Domain-basierten Kamerasystem

We describe a method to image dissolved oxygen (O2), in 2D at high spatial (&#60; 50-100 &#181;m) and temporal (&#60; 10 s) resolution. The method employs ...

Microfluidic Fabrication Techniques for High-Pressure Testing of Microscale Supercritical CO2 Foam Transport in Fractured Unconventional Reservoirs

Pressure limitations of many microfluidic platforms have been a significant challenge in microfluidic experimental studies of fractured media. As a result, these platforms have not been fully exploited for direct observation of high-pressure transport in fractures. This work introduces microfluidic platforms that enable direct observation of multiphase flow in devices featuring surrogate permeable media and fractured systems. Such platforms provide a pathway to address important and timely questions such as those related to CO2 capture, utilization and storage. This work provides a detailed description of the fabrication techniques and an experimental setup that may serve to analyze the behavior of supercritical CO2 (scCO2) foam, its structure and stability. Such studies provide important insights regarding enhanced oil recovery processes and the role of hydraulic fractures in resource recovery from unconventional reservoirs. This work presents a comparative study of microfluidic devices developed using two different techniques: photolithography/wet-etching/thermal-bonding versus Selective Laser-induced Etching. Both techniques result in devices that are chemically and physically resistant and tolerant of high pressure and temperature conditions that correspond to subsurface systems of interest. Both techniques provide pathways to high-precision etched microchannels and capable lab-on-chip devices. Photolithography/wet-etching, however, enables fabrication of complex channel networks with complex geometries, which would be a challenging task for laser etching techniques. This work summarizes a step-by-step photolithography, wet-etching and glass thermal-bonding protocol and, presents representative observations of foam transport with relevance to oil recovery from unconventional tight and shale formations. Finally, this work describes the use of a high-resolution monochromatic sensor to observe scCO2 foam behavior where the entirety of the permeable medium is observed simultaneously while preserving the resolution needed to resolve features as small as 10 &#181;m.

Microfluidic Fabrication Techniques for High-Pressure Testing of Microscale Supercritical CO2 Foam Transport in Fractured Unconventional Reservoirs

This paper describes a protocol along with a comparative study of two microfluidic fabrication techniques, namely photolithography/wet-etching/thermal-bonding and Selective Laser-induced Etching (SLE), that are suitable for high-pressure conditions. These techniques constitute enabling platforms for direct observation of fluid flow in surrogate permeable media and fractured systems under reservoir conditions.

Mikrofluidische Fertigungstechniken zur Hochdruckprüfung von mikroskaligen superkritischenCO2-Schaumtransporten in gebrochenen unkonventionellen Reservoirs

Pressure limitations of many microfluidic platforms have been a significant challenge in microfluidic experimental studies of fractured media. As a ...

Development of Efficient OLEDs from Solution Deposition

The use of highly efficient organic emitters based on the thermally activated delayed fluorescence (TADF) concept is interesting due to their 100% internal quantum efficiency. Presented here is a solution deposition method for the fabrication of efficient organic light-emitting diodes (OLEDs) based on a TADF emitter in a simple device structure. This fast, low-cost, and efficient process can be used for all OLED emissive layers that follow the host-guest concept. The fundamental steps are described along with necessary information for further reproduction. The goal to establish a general protocol that can be easily adapted for principal organic emitters currently under study and development.

Presented here is a protocol for the fabrication of efficient, simple, solution-deposited organic light-emitting diodes with low roll-off.

Entwicklung effizienter OLEDs aus Solution Deposition

The use of highly efficient organic emitters based on the thermally activated delayed fluorescence (TADF) concept is interesting due to their 100% ...

A Simple and Scalable Fabrication Method for Organic Electronic Devices on Textiles

Today, wearable electronics devices combine a large variety of functional, stretchable, and flexible technologies. However, in many cases, these devices cannot be worn under everyday conditions. Therefore, textiles are commonly considered the best substrate to accommodate electronic devices in wearable use. In this paper, we describe how to selectively pattern organic electroactive materials on textiles from a solution in an easy and scalable manner. This versatile deposition technique enables the fabrication of wearable organic electronic devices on clothes.

In this paper, we present a protocol to selectively deposit organic materials on textiles, which allows for the direct integration of organic electronic devices with wearables. The fabricated devices can be fully integrated in textiles, respecting their mechanical appearance and enabling sensing capabilities.

Eine einfache und skalierbare Herstellungsverfahren für organische elektronische Vorrichtungen auf Textilien

Today, wearable electronics devices combine a large variety of functional, stretchable, and flexible technologies. However, in many cases, these devices ...

Biotechnik

Fabrication and Validation of an Organ-on-chip System with Integrated Electrodes to Directly Quantify Transendothelial Electrical Resistance

Organs-on-chips, in vitro models involving the culture of (human) tissues inside microfluidic devices, are rapidly emerging and promise to provide useful research tools for studying human health and disease. To characterize the barrier function of cell layers cultured inside organ-on-chip devices, often transendothelial or transepithelial electrical resistance (TEER) is measured. To this end, electrodes are usually integrated into the chip by micromachining methods to provide more stable measurements than is achieved with manual insertion of electrodes into the inlets of the chip. However, these electrodes frequently hamper visual inspection of the studied cell layer or require expensive cleanroom processes for fabrication. To overcome these limitations, the device described here contains four easily integrated electrodes that are placed and fixed outside of the culture area, making visual inspection possible. Using these four electrodes the resistance of six measurement paths can be quantified, from which the TEER can be directly isolated, independent of the resistance of culture medium-filled microchannels. The blood-brain barrier was replicated in this device and its TEER was monitored to show the device applicability. This chip, the integrated electrodes and the TEER determination method are generally applicable in organs-on-chips, both to mimic other organs or to be incorporated into existing organ-on-chip systems.

This publication describes the fabrication of an organ-on-chip device with integrated electrodes for direct quantification of transendothelial electrical resistance (TEER). For validation, the blood-brain barrier was mimicked inside this microfluidic device and its barrier function was monitored. The presented methods for electrode integration and direct TEER quantification are generally applicable.

Herstellung und Validierung von einer Orgel-on-Chip-System mit integrierten Elektroden, direkt Transendothelial elektrischen Widerstand zu quantifizieren

Organs-on-chips, in vitro models involving the culture of (human) tissues inside microfluidic devices, are rapidly emerging and promise to provide useful ...

Scalable Fabrication of Stretchable, Dual Channel, Microfluidic Organ Chips

A significant number of lead compounds fail in the pharmaceutical pipeline because animal studies often fail to predict clinical responses in human patients. Human Organ-on-a-Chip (Organ Chip) microfluidic cell culture devices, which provide an experimental in vitro platform to assess efficacy, toxicity, and pharmacokinetic (PK) profiles in humans, may be better predictors of therapeutic efficacy and safety in the clinic compared to animal studies. These devices may be used to model the function of virtually any organ type and can be fluidically linked through common endothelium-lined microchannels to perform in vitro studies on human organ-level and whole body-level physiology without having to conduct experiments on people. These Organ Chips consist of two perfused microfluidic channels separated by a permeable elastomeric membrane with organ-specific parenchymal cells on one side and microvascular endothelium on the other, which can be cyclically stretched to provide organ-specific mechanical cues (e.g., breathing motions in lung). This protocol details the fabrication of flexible, dual channel, Organ Chips through casting of parts using 3D printed molds, enabling combination of multiple casting and post-processing steps. Porous poly (dimethyl siloxane) (PDMS) membranes are cast with micrometer sized through-holes using silicon pillar arrays under compression. Fabrication and assembly of Organ Chips involves equipment and steps that can be implemented outside of a traditional cleanroom. This protocol provides researchers with access to Organ Chip technology for in vitro organ- and body-level studies in drug discovery, safety and efficacy testing, as well as mechanistic studies of fundamental biological processes.

Here, we present a protocol that describes the fabrication of stretchable, dual channel, organ chip microfluidic cell culture devices for recapitulating organ-level functionality in vitro.

Skalierbare Fertigung von dehnbar, Dual Channel, mikrofluidischen Orgel Chips

A significant number of lead compounds fail in the pharmaceutical pipeline because animal studies often fail to predict clinical responses in human ...

A Lab-On-A-Chip Platform for Stimulating Osteocyte Mechanotransduction and Analyzing Functional Outcomes of Bone Remodeling

Bone remodeling is a tightly regulated process that is required for skeletal growth and repair as well as adapting to changes in the mechanical environment. During this process, mechanosensitive osteocytes regulate the opposing responses between the catabolic osteoclasts and anabolic osteoblasts. To better understand the highly intricate signaling pathways that regulate this process, our lab has developed a foundationary lab-on-a-chip (LOC) platform for analyzing functional outcomes (formation and resorption) of bone remodeling within a small scale system. As bone remodeling is a lengthy process that occurs on the order of weeks to months, we developed long-term cell culturing protocols within the system. Osteoblasts and osteoclasts were grown on functional activity substrates within the LOC and maintained for up to seven weeks. Afterward, chips were disassembled to allow for the quantification of bone formation and resorption. Additionally, we have designed a 3D printed mechanical loading device that pairs with the LOC platform and can be used to induce osteocyte mechanotransduction by deforming the cellular matrix. We have optimized cell culturing protocols for osteocytes, osteoblasts, and osteoclasts within the LOC platform and have addressed concerns of sterility and cytotoxicity. Here, we present the protocols for fabricating and sterilizing the LOC, seeding cells on functional substrates, inducing mechanical load, and disassembling the LOC to quantify endpoint results. We believe that these techniques lay the groundwork for developing a true organ-on-a-chip for bone remodeling.

Here, we present protocols for analyzing bone remodeling within a lab-on-a-chip platform. A 3D printed mechanical loading device can be paired with the platform to induce osteocyte mechanostransduction by deforming the cellular matrix. The platform can also be used to quantify bone remodeling functional outcomes from osteoclasts and osteoblasts (resorption/formation).

Ein 3D-gedruckten Kammer für organische opto-elektronischen Gerät Abbau testen

Zusammenfassung

Weitere Videos entdecken

Kapitel in diesem Video