Cross Cylindrical Flow: Measuring Pressure Distribution and Estimating Drag Coefficients

Visión general

Source: David Guo, College of Engineering, Technology, and Aeronautics (CETA), Southern New Hampshire University (SNHU), Manchester, New Hampshire

The pressure distributions and drag estimations for cross cylindrical flow have been investigated for centuries. By ideal inviscid potential flow theory, the pressure distribution around a cylinder is vertically symmetric. The pressure distribution upstream and downstream of the cylinder is also symmetric, which results in a zero-net drag force. However, experimental results yield very different flow patterns, pressure distributions and drag coefficients. This is because the ideal inviscid potential theory assumes irrotational flow, meaning viscosity is not considered or taken into account when determining the flow pattern. This differs significantly from reality.

In this demonstration, a wind tunnel is utilized to generate a specified airspeed, and a cylinder with 24 ports of pressure is used to collect pressure distribution data. This demonstration illustrates how the pressure of a real fluid flowing around a circular cylinder differs from predicted results based on the potential flow of an idealized fluid. The drag coefficient will also be estimated and compared to the predicted value.

Procedimiento

1. Measuring the pressure distribution around a cylinder

  1. Remove the top cover of the test section of a wind tunnel, and mount a clean, aluminum cylinder (d = 4 in) with 24 built-in ports on a turntable (Figure 3). Install the cylinder so that port zero is facing upstream (Figure 4a).
  2. Replace the top cover, and connect the 24 pressure tubes labeled 0 - 23 to the corresponding ports on the manometer panel. The manometer panel

Log in or to access full content. Learn more about your institution’s access to JoVE content here

Resultados

Experimental results for the clean and disturbed cylinder are shown in Tables 1 and 2, respectively. The data can be plotted in a graph of the pressure coefficient, Cp, versus angular position, θ, for ideal and real flow as shown in Figure 6.

Log in or to access full content. Learn more about your institution’s access to JoVE content here

Aplicación y resumen

Cross cylindrical flow has been investigated theoretically and experimentally since the 18th century. Finding the discrepancies between the two allows us to expand our understanding of fluid dynamics and explore new methodologies. Boundary layer flow theory was developed by Prandtl [3] in early 20th century, and it is a good example of the extension of inviscid flow to viscid flow theory in solving D’Alembert’s Paradox.

In this experiment, the cross cylindrical flow was investigate

Log in or to access full content. Learn more about your institution’s access to JoVE content here

Referencias
  1. d'Alembert, Jean le Rond (1752), Essai d'une nouvelle théorie de la résistance des fluides
  2. John D. Anderson (2017), Fundamentals of Aerodynamics, 6th Edition, ISBN: 978-1-259-12991-9, McGraw-Hill
  3. Prandtl, Ludwig (1904), Motion of fluids with very little viscosity, 452, NACA Technical Memorandum
Tags
Cross Cylindrical FlowMeasuring Pressure DistributionEstimating Drag CoefficientsFluid Flow Around A CylinderInviscid Potential Flow TheorySymmetric Pressure DistributionZero Net Drag ForceExperimental ResultsFlow PatternsViscosity Of FluidBoundary LayerViscous ForcesSkin Friction DragFlow SeparationLow Pressure WakePressure DifferentialReynolds NumberFluid DensityFree Stream Velocity

Saltar a...

0:01

Concepts

3:01

Measuring the Pressure Distribution Around a Cylinder

5:11

Results

Vídeos de esta colección:

article

Now Playing

Cross Cylindrical Flow: Measuring Pressure Distribution and Estimating Drag Coefficients

Aeronautical Engineering

16.0K Vistas

article

Rendimiento aerodinámico en un modelo de avión: El DC-6B

Aeronautical Engineering

8.1K Vistas

article

Caracterización de la hélice: Variaciones en el paso, el diámetro y el número de palas en el rendimiento

Aeronautical Engineering

26.0K Vistas

article

Comportamiento de la superficie aerodinámica: Distribución de la presión en un ala Clark Y-14

Aeronautical Engineering

20.8K Vistas

article

Rendimiento del ala Clark Y-14: Despliegue de dispositivos de elevación alta (Flaps y Slats)

Aeronautical Engineering

13.2K Vistas

article

Método esfera de turbulencia: Evaluación de la calidad del flujo del túnel de viento

Aeronautical Engineering

8.6K Vistas

article

Análisis de boquillas: variaciones en el número de Mach y la presión a lo largo de una boquilla convergente y una convergente-divergente

Aeronautical Engineering

37.7K Vistas

article

Fotografías de Schlieren: Una técnica para visualizar las características del flujo supersónico

Aeronautical Engineering

11.2K Vistas

article

Visualización del flujo en un túnel de agua: Observación del vórtice en el borde de ataque sobre un ala Delta

Aeronautical Engineering

7.8K Vistas

article

Visualización del flujo de tinte superficial: Un método cualitativo para observar los patrones de las líneas del tramo en un flujo supersónico

Aeronautical Engineering

4.8K Vistas

article

Tubo Pitot-estático: Un dispositivo para medir la velocidad del flujo de aire

Aeronautical Engineering

48.4K Vistas

article

Anemometría de temperatura constante:Uuna herramienta para estudiar el flujo de capa de límite turbulenta

Aeronautical Engineering

7.1K Vistas

article

Transductor de presión: Calibración mediante un tubo de Pitot estático

Aeronautical Engineering

8.4K Vistas

article

Control de vuelo en tiempo real: calibración de sensores integrados y adquisición de datos

Aeronautical Engineering

10.0K Vistas

article

Aerodinámica de multicópteros: Caracterización del empuje en un hexacóptero

Aeronautical Engineering

9.0K Vistas

JoVE Logo

Privacidad

Condiciones de uso

Políticas

Investigación

Educación

ACERCA DE JoVE

Copyright © 2025 MyJoVE Corporation. Todos los derechos reservados

Pressure port #