The authors would like to thank Dr. Daniel Baldassarre, SUNY Oswego for helpful discussions and comments on the manuscript. This study was supported by Rice Creek Associate Grants, Oswego; Challenge Grants SUNY Oswego and National Science Foundation (NSF) Small Grants to PGL and JG.

NOTE: Painted turtle (Chrysemys picta) eggs used in this study were collected during the nesting season of May through June 2015-16 from Rice Creek Field Station, Oswego New York with permission obtained from the New York State Department of Environmental Conservation (DEC).
1. Chemical drying method to process embryos for SEM
<ol>
	<li>Collect turtle eggs from field sites during the nesting season. Prepare the incubation chambers in advance, made of plastic boxes with lids (L x W x...

The authors have nothing to disclose

In our study, different fixation agents, dehydration and drying methods were tested to prepare three different delicate biological samples for SEM imaging: embryos, eggshells, and fungal cultures. SEM is commonly used for surface analysis, so fixative penetration is less concerning, but it must be understood that poorly fixed internal structures will cause inward shrinking or/and collapsed surface structures. Extended fixation time should also be considered for larger tissue samples, replacing the fixative solution a few...

Scanning electron microscope (SEM) ultrastructural analysis and intracellular imaging supplement light microscopy for three-dimensional profiling of prokaryotes, plants, and animals. The high spatial resolution of an SEM makes it one of the most versatile and powerful techniques available for the examination of microstructural characteristics of specimens at the nanometer to micrometer scale. Desiccated specimens are resolved to compositional and topographical structures with intense detail, which provides the foundation for developing valid conclusions about functional relationships1,2,3,4,5,6,7,8,9. When interpreting SEM images of biological specimens, it is a great challenge to distinguish between native structures and the artifacts that are created during processing. SEM is generally operated at very high vacuums to avoid any interference from gas molecules affecting the primary, secondary or backscattered electron beams emitted from the sample10,11. Also, biological materials are susceptible to radiation damage due to their poor or non-conducting properties. It is essential for the specimens loaded into the SEM to be completely dry and free of any organic contaminants to eliminate any possible outgassing in a high vacuum environment10,11. As biological specimens are mostly composed of water, additional preparative techniques are required to ensure that the native structures are retained.
The resolution obtained is based on optimizing preparation methods specific to specimen types and instrumental parameters utilized. Thus, it is necessary to avoid using generalized processing steps for all tissue types. Some biological specimens will require less stringent processing to preserve their structure while more time and care might be needed for delicate types of samples to avoid the introduction of drying artifacts, such as shrinkage and collapse. Sample preparation is a critical step in SEM imaging; the findings of morphometric studies are remarkably influenced by specimen preparation procedures12,13. Common preparation steps for many biological samples are fixation, dehydration and coating with a metal such as gold, platinum or palladium to convert their surfaces to be conductive for SEM analysis. The nature and combination of steps used will vary depending on the type of the tissue, and the specific goals of the study. Charge build-up, sensitivity to vacuum and electron beam damage pose problems when processing soft delicate biological samples, necessitating additional processing steps to retain the native structure of the object. Using conventional methods such as osmium tetroxide fixing, and dehydration cause shrinkage and the collapse of delicate tissues14,15,16,17. The aim of the study is to establish elegant methodologies derived by combining ideas from earlier studies with modifications to prepare and image soft delicate tissues (e.g., reptile embryos, eggshell of painted turtles, and fungal cultures).
Selection of a suitable fixing method is the first most important step for microscopic analysis of biological specimens. Fixing the tissues immediately after isolating from an organism is essential to prevent alteration in their morphology due to decomposition. An effective fixative should terminate cellular processes by permeating the cells quickly and maintaining the effect irreversibly to stabilize the structure of the sample to withstand both subsequent processing steps and examination under the SEM17,18. Although several chemical and physical fixation methods are known, chemical fixation is more commonly used for biological specimens to avoid any cellular changes due to autolysis, putrefaction, and drying effects. There are numerous fixative chemical formulations discussed in literature17,19,20,21,22,23, fixatives that work by denaturing and coagulating biological macromolecules, and those that fix by covalently cross-linking macromolecules. Alcohols are used as denaturing fixatives that preserve ultrastructure very poorly and are used mostly for light microscopy and not recommended for electron microscopic analysis. Cross-linking fixatives like formaldehyde, glutaraldehyde, and osmium tetroxide create intermolecular and intramolecular crosslinking between macromolecules within the tissues, providing excellent preservation of ultra-structures11,24,25,26. Biological samples are sensitive to temperature. The temperature at the beginning of fixation is recommended to be 4 &#176;C to reduce the lateral mobility of membrane proteins, to slow the diffusion of intercellular molecules, and to slow the rate of fixation11. The time required for fixing tissues largely depends on the size of the sample and the speed at which the fixative diffuses and reacts with the components of the specimen. An overnight fixation in 4% paraformaldehyde or 3% glutaraldehyde in PBS at 4 &#176;C is the preferred method for SEM analysis of specimens used in this study for their sequential penetrative properties, which allow smaller delicate samples to be processed17,18,19,20,27. A post-fixation step with osmium tetroxide is eliminated not only due to its toxic nature but also found to implement no added advantage to improve image quality for the samples analyzed in this study.
Biological samples contain fluids that interfere with the SEM operation; hence, the samples need to be dried before inserting it in the SEM sample chamber. Once dehydration is ensured, the solvent must be removed from the tissue without creating artifacts into the specimens due to the surface tension/drying. Three different drying methods were commonly used during processing tissues for SEM imaging: air drying, critical point drying, and freeze drying samples28,29,30,31. Few studies report all three drying methods producing identical results with animal tissue samples28,29,30,31. A general practice used for smaller specimens are chemical dehydration by ascending concentration series of alcohol and hexamethyldisilazane (HMDS), but larger specimens are dried using a critical point drying (CPD) instrument32. During the drying process, considerable forces formed in small cavities that are passed through the specimen by a liquid/gas interface; this can even lead to a complete collapse of the hollow structures33. Any deformation occurring due to the treatment could then be mistaken as a native structural feature of the specimen. Thus, the generalized phenomenon for processing should be eliminated and a unique drying process should be standardized for each type of tissue especially when delicate tissue specimens are analyzed.
In several trials conducted using various combination of all the above-mentioned processes, we standardized the methods that can be used for SEM analysis of three delicate tissues: reptile embryos, eggshells of painted turtles, and fungal cultures. Developmental biologists and morphologists describe normal and abnormal morphogenesis during embryo development in representative vertebrate animals. Investigations on gene signaling pathways depend on the morphological description of novel structures. To avoid any abrupt change in the vertebrate embryo structure during SEM analysis, we recommend chemical drying following dehydration. Chemical drying using HMDS is the relatively newest drying method and the advantages include relative quickness, ease of use, lost cost, and the limited expertise and equipment needed9. CPD is a commonly used drying technique using passaging CO2 across the specimens at a specific temperature and pressure. We identified that HMDS is suitable for drying soft delicate tissues and allows larger samples to be processed compared to critical point drying, which caused extensive deformation to embryonic tissues. Several methods have been used to prepare samples for SEM imaging to study the morphological characteristics of fungi34. Fungal specimens are commonly fixed in osmium tetroxide followed by ethanol dehydration and critical point drying, which may provide satisfactory results, although the toxic effects of osmium tetroxide6,7,35 and losing fungal materials while changing solutions during processing are pronounced disadvantages. The sample preparation technique using air-drying without fixation has also been practiced36 but results in shrunken and collapsed structures, and observation of such specimens can easily be misinterpreted while characterizing the species. Fungal hypha loses its integrity in contact with liquids and an even drying may not be achieved to restore the structure. Due to this effect, freeze-drying is commonly used for drying soft tissues like fungal mycelium. Freeze drying works well for clean materials but the presence of any salts or secretion will obscure surface detail that will be identified only at the SEM viewing stage. We coupled the slide culture method with glutaraldehyde fixing and critical point drying to yield structural details of intact fungal hyphae and spores. Although CPD drying caused shrinkage in embryos, it resulted in well preserved mycelial structures when coupled with glutaraldehyde fixation. The eggshell is of primary importance to the embryo of oviparous animals by not only acting as a protective covering but also providing mechanical stability, permeability to gas and water, and a calcium reserve for the developing embryo. Freshwater turtle eggshells are classified as &#34;rigid&#34;&#160;based on their structure, and due to their availability have received significant attention from biologists1,2,3,4,5,6,7,37,38.
We detail simple methods for easy examination of eggshell and shell membranes of painted turtle that can be applied to any rigid eggshell species. Preparation methodologies were evaluated based on resulting image quality and reduced potential artifacts.&#160;

<table border="0" cellpadding="0" cellspacing="0" style="width:712px;" width="711">
	<colgroup>
		<col />
		<col />
		<col />
		<col />
	</colgroup>
	<tbody>
		<tr height="21">
			<td height="21" style="height:21px;width:215px;">Agar</td>
			<td style="width:123px;">Fischer Scientific</td>
			<td style="width:145px;">S25127A</td>
			<td style="width:229px;">for slide cultures</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:215px;">Aluminum pin stub</td>
			<td style="width:123px;">Tedpella</td>
			<td style="width:145px;">16111</td>
			<td style="width:229px;">12.7 mm x 8 mm</td>
		</tr>
		<tr height="63">
			<td height="63" style="height:63px;width:215px;">BD Difco Dehydrated Culture Media: Potato Dextrose Agar</td>
			<td style="width:123px;">BD 213400</td>
			<td style="width:145px;">DF0013-17-6</td>
			<td style="width:229px;">Media for isolation and cultivation of Fungi, yeast and molds</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:215px;">Chloramphenicol</td>
			<td style="width:123px;">Fischer BioReagents</td>
			<td style="width:145px;">BP904-100</td>
			<td style="width:229px;">Antibiotic for media</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:215px;">Coarse Vermiculite</td>
			<td style="width:123px;">Greenhouse Megastore</td>
			<td style="width:145px;">SO-VER-12</td>
			<td style="width:229px;">bedding medium</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:215px;">Clear 12- well plate</td>
			<td style="width:123px;">Corning</td>
			<td style="width:145px;">07-201-589</td>
			<td style="width:229px;">for fixing embryo</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:215px;">Coverslips</td>
			<td style="width:123px;">Fischer Scientific</td>
			<td style="width:145px;">S17525B</td>
			<td style="width:229px;">for slide culture</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:215px;">Critical Point Dryer</td>
			<td style="width:123px;">Quorum CPD</td>
			<td style="width:145px;">EMS850</td>
			<td style="width:229px;">critical point drying</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:215px;">Culture dishes</td>
			<td style="width:123px;">Fischer Scientific</td>
			<td style="width:145px;">08 747B</td>
			<td style="width:229px;">DISH PETRI 100X10MM 12/PK</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:215px;">Ethanol</td>
			<td style="width:123px;">Fischer Scientific</td>
			<td style="width:145px;">A406P 4</td>
			<td style="width:229px;">dehydration agent</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:215px;">Forceps- Aquarius Tweezers</td>
			<td style="width:123px;">Tedpella</td>
			<td style="width:145px;">5804</td>
			<td style="width:229px;">style 4, length 108mm, widh x thickness 0.017 x 0.17 mm</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:215px;">Glutaraldehyde</td>
			<td style="width:123px;">Fischer Scientific</td>
			<td style="width:145px;">G151-1</td>
			<td style="width:229px;">fixative</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:215px;">Gold target for sputter coater</td>
			<td style="width:123px;">DENTON VACUUM</td>
			<td style="width:145px;">TAR001-0158</td>
			<td style="width:229px;">Gold Target, 2.375&#8243; D X .002&#8243;</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:215px;">Hexamethyldisilazana</td>
			<td style="width:123px;">Fischer Scientific</td>
			<td style="width:145px;">C19479-5000</td>
			<td style="width:229px;">chemical drying agent</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:215px;">Kim wipes</td>
			<td style="width:123px;">Kimtech</td>
			<td style="width:145px;">S-8115</td>
			<td style="width:229px;">cleaning</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:215px;">Microscope slides</td>
			<td style="width:123px;">Thermo Scientific</td>
			<td style="width:145px;">67-762-16</td>
			<td style="width:229px;">for slide culture</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:215px;">Microscopy Scissors</td>
			<td style="width:123px;">Tedpella</td>
			<td style="width:145px;">1327</td>
			<td style="width:229px;">Double pointed, stainless steel, 100 mm L (3-5/8&#34;).</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:215px;">Micro-scissors</td>
			<td style="width:123px;">Tedpella</td>
			<td style="width:145px;">1346</td>
			<td style="width:229px;">Vannas-type, straight, 80mm L</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:215px;">Moria Perforated Embryo Spoon</td>
			<td style="width:123px;">Fine Science Tools</td>
			<td style="width:145px;">10370-17</td>
			<td style="width:229px;">Length 14.5 cm, tip diameter 20 mm, spoon depth 5 mm</td>
		</tr>
		<tr height="84">
			<td height="84" style="height:84px;width:215px;">Netwell Inserts</td>
			<td style="width:123px;">Corning</td>
			<td style="width:145px;">0330B09</td>
			<td style="width:229px;">15 mm Inserts with 74 &#181;m Mesh Size Polyester Membrane act as handy carriers during specimen processing into different solvents</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:215px;">Paraformaldehyde</td>
			<td style="width:123px;">Fischer Scientific</td>
			<td style="width:145px;">T353 500</td>
			<td style="width:229px;">fixative</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:215px;">Peat moss</td>
			<td style="width:123px;">Walmart- Miracle Gro</td>
			<td style="width:145px;">551705263</td>
			<td style="width:229px;">bedding medium</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:215px;">PELCO tabs double stick carbon conductive tape</td>
			<td style="width:123px;">Tedpella</td>
			<td style="width:145px;">5000</td>
			<td style="width:229px;">12 mm OD</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:215px;">Sputter coater</td>
			<td style="width:123px;">DENTON VACUUM</td>
			<td style="width:145px;">DESK V</td>
			<td style="width:229px;">thin metal coating</td>
		</tr>
		<tr height="63">
			<td height="63" style="height:63px;width:215px;">SEM</td>
			<td style="width:123px;">JEOL USA</td>
			<td style="width:145px;">JEOL JSM 6610LV scanning electron scope</td>
			<td style="width:229px;">electron microscopy</td>
		</tr>
	</tbody>
</table>

processing embryo, eggshell, and fungal culture for scanning electron microscopy

Although scanning electron microscopy (SEM) is being widely used for the ultra-structural analysis of various biological and non-biological samples, methods involved in processing different biological samples involve unique practices. All conventional practices described in the literature for processing samples still find useful applications, but subtle changes in the sample preparation can alter image quality, as well as, introduce artifacts. Hence, using a unique sample preparation technique specific to the type of tissue analyzed is required to obtain a good quality image with ultrastructural resolution. The focus of this study is to provide the optimal sample preparation protocols for imaging embryos, rigid eggshells, and fungal cultures using SEM. The following optimizations were recommended to yield good results for the three different delicate biological samples studied. Use of milder fixatives like 4% paraformaldehyde or 3% glutaraldehyde followed by dehydration with ethanol series is mandatory. Fungal mycelium on agar blocks obtained by slide cultures yields a better ultrastructural integrity compared to cultures taken directly from agar plates. Chemical drying of embryos with HMDS provides drying without introducing surface tension artifacts compared to critical point drying. HMDS prevents cracking caused by shrinkage as samples are less brittle during drying. However, for fungal culture, critical point drying provides acceptable image quality compared to chemical drying. Eggshells can be imaged with no special preparation steps except for thorough washing and air drying prior to mounting. Preparation methodologies were standardized based on acceptable image quality obtained with each trial.&#160;

Figure 1 show scanning electron micrographic analysis of painted turtle (Chrysemys picta) embryos. Painted turtle eggs collected and incubated on a bedding medium, mounted on aluminum stubs following chemical drying were used for SEM imaging (Figure 1A-E). A lateral view of a stage 12 embryo shows the craniofacial structures; maxillary prominence extends beyond the mandibular and limits a well-marked nasal pit medially; five pharyngeal ...

Watch this Scientific Journal Video about Processing Embryo, Eggshell, and Fungal Culture for Scanning Electron Microscopy at JoVE.com

Processing Embryo, Eggshell, and Fungal Culture for Scanning Electron Microscopy

Here, we present detailed processing protocols for imaging delicate tissue samples using scanning electron microscopy (SEM). Three different processing methods, namely, hexamethyl disilazana (HMDS) chemical drying, simple air drying, and critical point drying are described for preparing rigid eggshells, embryos at early developmental stages, and fungal cultures respectively.

Although scanning electron microscopy (SEM) is being widely used for the ultra-structural analysis of various biological and non-biological samples, ...

We have standardized sample preparation protocols for imaging painted turtle embryos, rigid eggshells and fungal cultures using scanning electron microscopy. These comprehensive methods use subtle alterations to known protocols to process three delicate tissues allowing the differentiation between original structures and processing the artifacts. Demonstrating the procedure with me will be Jessica Gibbons, a graduate student from my laboratory.Before collecting turtle eggs from a field site during nesting season, make four to six 0.25 centimeter holes along the sides of plastic boxes and on their lids to allow aeration. Before filling the boxes with a moist mixture of vermiculite and peat moss bedding mixture at a one to one ratio. At the nesting site, gently remove the soil to uncover the eggs and wipe the surface of each turtle egg with a diluted iodine tincture to protect against microbial contamination during incubation.Place a maximum of eight to nine eggs per box in the same orientation and alignment as they were laid, keeping individual clutches separate from each other. When all of the eggs have been collected, manually bury the eggs half in the bedding and place the lidded boxes inside a 30 degree Celsius incubator for 10 to 17 days to obtain embryonic stages 12, 13 and 18 embryos respectively. Add distilled water to partially wet the bedding medium every other day to avoid dehydration, and to maintain the moisture level for normal embryo development.At the appropriate stage of development, use pointed scissors to make a cut onto one side of the dorsal eggshell and yolk membrane together, vertical to the long axis of the egg. Next, cut the other side of the egg along the short axis, and use forceps to peel open the excised piece with the embryo side up. Cut the other lateral side of the eggshell and place the excised piece of shell into PBS.Using a stereomicroscope and forceps, peel the embryo and yolk membrane from the eggshell. Use the forceps and micro scissors to remove the extra embryonic membranes, and use an embryo spoon to transfer the embryo into a Petri dish of fresh PBS. After washing away any blood and yolk, place up to three embryos per well of a 12-well plate, containing 4%paraformaldehyde at four degrees Celsius for two to three days.When the samples appear white, use polystyrene inserts with polyester mesh bottoms to rinse the embryos with three five minute washes in fresh PBS per wash. After the last wash, dehydrate samples in an ascending ethanol series for one hour per concentration. After the second ethanol immersion, dry the embryos in a series of HMDS to ethanol concentrations for 20 minutes per immersion with the Petri dishes partially covered.Then place the embryos in a final 100%HMDS solution, completely or partially covered in a fume hood overnight. Slow drying by gradually increasing the concentration of HDMS to ethanol is important for revealing an excellent surface structure in the embryos. The next morning, use double stick carbon conductive tape to carefully mount the completely dried samples on a standard aluminum pin stub.When all of the samples have been mounted, introduce the samples into the sputter coater chamber to coat the specimens with a very thin film of gold for 60 to 120 seconds at a 35 milliamp sputter. Then securely fasten the set screws to mount the stubs onto the corresponding pour plates. Use the sample exchange tool to transfer the sample holder into the sample chamber of the scanning electron microscope for imaging.To prepare eggshells for scanning electron microscopy, place the eggshells in distilled water for at least one hour after the embryo harvest to eliminate any yolk or albumin contamination. Next, air dry the cleaned eggshells on delicate anti-static wipes in the fume hood overnight. Store the dried eggshells in clean specimen bottles, labeled by number and embryo stage.Then, mount, sputter coat and image the eggshell specimens as just demonstrated for the embryos. To establish slide fungal cultures, use a sterile scalpel to cut half to three quarter inch blocks of solid potato dextrose agar, and place the blocks on individual glass microscope slides. Place sterile toothpicks on the bottom of clean Petri dishes for raising slides off of them to create surface tension between the plate and the slide.Place each slide on the toothpicks in the Petri dish. Next, use a sterile loop to transfer fungi from the specimen inoculum to each of the four lateral sides of an agar block. Add a few drops of sterile distilled water to the Petri dish around the slide to ensure moisture for the growing fungi.Partially seal the plate with paraffin film and place the plate in the 30 degree Celsius incubator for the appropriate incubation period for the fungal species. At the end of the incubation, remove the slide from the Petri dish and use sterile forceps to transfer the tightly adhered agar block from the slide to a container of 3%glutaraldehyde for an overnight incubation at four degrees Celsius. The next morning, dehydrate the samples in an ascending ethanol series for 15 minutes per concentration.After the 90%immersion, process the samples for final dehydration with two 30 minute changes in 100%ethanol to ensure a complete saturation before placing the dehydrated samples in the chamber of the critical point drying apparatus. Seal the chamber and open the valves to allow liquid carbon dioxide to vent in and to let the ethanol vent out until liquid carbon dioxide completely fills the chamber. Next, seal and slowly heat the chamber to achieve a critical point when the chamber pressure exceeds 1, 000 pounds of pressure per square inch, the temperature exceeds 31 degrees Celsius, and the liquid and gas space of carbon dioxide is in equilibrium.Then slowly drain the carbon dioxide from the chamber and the sample as a gas, to avoid any effects of surface tension on the sample, and mount, plate, and image the fungal specimens as demonstrated. A lateral scanning electron micrograph view of a stage 12 painted turtle embryo reveals how the maxillary prominence extends beyond the mandibular and medially limits a well marked nasal pit. Five pharyngeal arches can also be observed.In a stage 15 embryo, newly formed somites are visible at the posterior tail region of the embryo, and the forelimb buds point more cortally than ventrally. A well-defined outgrowth of a carapace ridge can also be visualized along the entire interlimb flank region of the embryo. At stage 18, a short feebly projecting snout has formed with a slightly upturned lower beak with a terminal hook that fits into the central notch of the upper beak.The upper jaw exhibits a notched appearance, and a tiny egg tooth can be seen forming at the tip of the upper jaw. Ultrastructural analysis of the Chrysemys picta eggshell and shell membrane by scanning electron microscopy, reveals an outer calcarinus eggshell layer, firmly attached to the inner filamentous shell membrane. The outer surface of the eggshell consists of well-distinguished mineralized shell units made of globular spherical nodules arranged in groups and in between adjacent shell units, with a concentration of small rounded depressions or pores of various sizes.Common methodologies cannot be generalized for all biological specimen to achieve a decent image quality using SEM. Unique alterations as demonstrated are essential for a specific tissue types. The chemical and air drying method could also be used for other organic samples, and the coupling slide culture technique could be used for all soft, robust microbial cultures.

processing-embryo-eggshell-fungal-culture-for-scanning-electron

Research

JoVE Journal

Environment

9.1K vistas.  SUNY Oswego. Contamos con protocolos estandarizados de preparación de muestras para embriones de tortuga pintados por imágenes, cáscaras de huevo rígidas y cultivos de hongos utilizando microscopía electrónica de barrido. Estos métodos integrales utilizan alteraciones sutiles en los protocolos conocidos para procesar tres tejidos delicados permitiendo la diferenciación entre las estructuras originales y el procesamiento de los artefactos. Demostrando el procedimiento conmigo será Jessica Gibbons,...