Name: synthesis of monodisperse cylindrical nanoparticles via crystallization-driven self-assembly of biodegradable block copolymers
Uploaded: 2019-06-20T15:00:00
Description: Watch this Scientific Journal Video about Synthesis of Monodisperse Cylindrical Nanoparticles via Crystallization-driven Self-assembly of Biodegradable Block Copolymers at JoVE.com

There are no acknowledgments.

1. Drying of toluene
NOTE: If you have access to dry solvent towers, collect the toluene and degas by five freeze-pump-thaw cycles.
<ol>
	<li>Dry 3 &#197; molecular sieves in a 250 mL Schlenk flask at 250-300 &#176;C under vacuum for 48 h and transfer into a glovebox.</li>
	<li>Dry two ampoules in the oven at 150 &#176;C overnight and transfer them into the glovebox.</li>
	<li>Transfer the activated molecular sieves into the two ampoules and remove from the glovebox.</li>
	<li>Dry a two-neck...

<ol>
	<li>Geng, Y., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Shape+effects+of+filaments+versus+spherical+particles+in+flow+and+drug+delivery.">Shape effects of filaments versus spherical particles in flow and drug delivery.</a> Nature Nanotechnology. 2, 249 (2007).</li><li>Won, Y. -. Y., Davis, H. T., Bates, F. S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Giant+Wormlike+Rubber+Micelles.">Giant Wormlike Rubber Micelles.</a> Science. 283 (5404), 960-963 (1999).</li><li>Mai, Y., Eisenberg, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Self-assembly+of+block+copolymers.">Self-assembly of block copolymers.</a> Chemical Society Reviews. 41 (18), 5969-5985 (2012).</li><li>Charleux, B., Delaittre, G., Rieger, J., D&#8217;Agosto, F. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Polymerization-Induced+Self-Assembly:+From+Soluble+Macromolecules+to+Block+Copolymer+Nano-Objects+in+One+Step.">Polymerization-Induced Self-Assembly: From Soluble Macromolecules to Block Copolymer Nano-Objects in One Step.</a> Macromolecules. 45 (17), 6753-6765 (2012).</li><li>Gilroy, J. B., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Monodisperse+cylindrical+micelles+by+crystallization-driven+living+self-assembly.">Monodisperse cylindrical micelles by crystallization-driven living self-assembly.</a> Nature Chemistry. 2, 566 (2010).</li><li>Boott, C. E., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Probing+the+Growth+Kinetics+for+the+Formation+of+Uniform+1D+Block+Copolymer+Nanoparticles+by+Living+Crystallization-Driven+Self-Assembly.">Probing the Growth Kinetics for the Formation of Uniform 1D Block Copolymer Nanoparticles by Living Crystallization-Driven Self-Assembly.</a> ACS Nano. 12 (9), 8920-8933 (2018).</li><li>G&#228;dt, T., Ieong, N. S., Cambridge, G., Winnik, M. A., Manners, I. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Complex+and+hierarchical+micelle+architectures+from+diblock+copolymers+using+living,+crystallization-driven+polymerizations.">Complex and hierarchical micelle architectures from diblock copolymers using living, crystallization-driven polymerizations.</a> Nature Materials. 8, 144 (2009).</li><li>Wang, X., Guerin, G., Wang, H., Wang, Y., Manners, I., Winnik, M. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Cylindrical+Block+Copolymer+Micelles+and+Co-Micelles+of+Controlled+Length+and+Architecture.">Cylindrical Block Copolymer Micelles and Co-Micelles of Controlled Length and Architecture.</a> Science. 317 (5838), (2007).</li><li>Sch&#246;bel, J., Karg, M., Rosenbach, D., Krauss, G., Greiner, A., Schmalz, H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Patchy+Wormlike+Micelles+with+Tailored+Functionality+by+Crystallization-Driven+Self-Assembly:+A+Versatile+Platform+for+Mesostructured+Hybrid+Materials.">Patchy Wormlike Micelles with Tailored Functionality by Crystallization-Driven Self-Assembly: A Versatile Platform for Mesostructured Hybrid Materials.</a> Macromolecules. 49 (7), 2761-2771 (2016).</li><li>Arno, M. C., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Precision+Epitaxy+for+Aqueous+1D+and+2D+Poly(&#949;-caprolactone)+Assemblies.">Precision Epitaxy for Aqueous 1D and 2D Poly(&#949;-caprolactone) Assemblies.</a> Journal of the American Chemical Society. 139 (46), 16980-16985 (2017).</li><li>Sun, L., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Tuning+the+Size+of+Cylindrical+Micelles+from+Poly(l-lactide)-b-poly(acrylic+acid)+Diblock+Copolymers+Based+on+Crystallization-Driven+Self-Assembly.">Tuning the Size of Cylindrical Micelles from Poly(l-lactide)-b-poly(acrylic acid) Diblock Copolymers Based on Crystallization-Driven Self-Assembly.</a> Macromolecules. 46 (22), 9074-9082 (2013).</li><li>Fan, B., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Crystallization-driven+one-dimensional+self-assembly+of+polyethylene-b-poly(tert-butylacrylate)+diblock+copolymers+in+DMF:+effects+of+crystallization+temperature+and+the+corona-forming+block.">Crystallization-driven one-dimensional self-assembly of polyethylene-b-poly(tert-butylacrylate) diblock copolymers in DMF: effects of crystallization temperature and the corona-forming block.</a> Soft Matter. 12 (1), 67-76 (2016).</li><li>He, W. -. N., Zhou, B., Xu, J. -. T., Du, B. -. Y., Fan, Z. -. Q. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Two+Growth+Modes+of+Semicrystalline+Cylindrical+Poly(&#949;-caprolactone)-b-poly(ethylene+oxide)+Micelles.">Two Growth Modes of Semicrystalline Cylindrical Poly(&#949;-caprolactone)-b-poly(ethylene oxide) Micelles.</a> Macromolecules. 45 (24), 9768-9778 (2012).</li><li>Patra, S. K., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Cylindrical+Micelles+of+Controlled+Length+with+a+&#960;-Conjugated+Polythiophene+Core+via+Crystallization-Driven+Self-Assembly.">Cylindrical Micelles of Controlled Length with a &#960;-Conjugated Polythiophene Core via Crystallization-Driven Self-Assembly.</a> Journal of the American Chemical Society. 133 (23), 8842-8845 (2011).</li><li>Kynaston, E. L., Nazemi, A., MacFarlane, L. R., Whittell, G. R., Faul, C. F. J., Manners, I. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Uniform+Polyselenophene+Block+Copolymer+Fiberlike+Micelles+and+Block+Co-micelles+via+Living+Crystallization-Driven+Self-Assembly.">Uniform Polyselenophene Block Copolymer Fiberlike Micelles and Block Co-micelles via Living Crystallization-Driven Self-Assembly.</a> Macromolecules. 51 (3), 1002-1010 (2018).</li><li>Rizis, G., Mvan de Ven, T. G., Eisenberg, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Crystallinity-driven+morphological+ripening+processes+for+poly(ethylene+oxide)-block-polycaprolactone+micelles+in+water.">Crystallinity-driven morphological ripening processes for poly(ethylene oxide)-block-polycaprolactone micelles in water.</a> Soft Matter. 10 (16), 2825-2835 (2014).</li><li>Jin, X. -. H., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Long-range+exciton+transport+in+conjugated+polymer+nanofibers+prepared+by+seeded+growth.">Long-range exciton transport in conjugated polymer nanofibers prepared by seeded growth.</a> Science. 360 (6391), (2018).</li><li>Rizis, G., van&#8197;de&#8197;Ven, T. G. M., Eisenberg, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=&#8220;Raft&#8221;+Formation+by+Two-Dimensional+Self-Assembly+of+Block+Copolymer+Rod+Micelles+in+Aqueous+Solution.">&#8220;Raft&#8221; Formation by Two-Dimensional Self-Assembly of Block Copolymer Rod Micelles in Aqueous Solution.</a> Angewandte Chemie International Edition. 53 (34), 9000-9003 (2014).</li><li>Qiu, H., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Uniform+patchy+and+hollow+rectangular+platelet+micelles+from+crystallizable+polymer+blends.">Uniform patchy and hollow rectangular platelet micelles from crystallizable polymer blends.</a> Science. 352 (6286), 701 (2016).</li><li>Zhou, H., Lu, Y., Yu, Q., Manners, I., Winnik, M. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Monitoring+Collapse+of+Uniform+Cylindrical+Brushes+with+a+Thermoresponsive+Corona+in+Water.">Monitoring Collapse of Uniform Cylindrical Brushes with a Thermoresponsive Corona in Water.</a> ACS Macro Letters. 7 (2), 166-171 (2018).</li></ol>

The synthesis and living CDSA of the triblock copolymer PCL50-PMMA10-PDMA200 has been outlined. Although stringent conditions are required, the ring-opening polymerization of &#949;-caprolactone gave polymers with excellent properties that enabled the successful chain extensions of MMA and DMA. These polymers were successful in their self-seeding, obtaining a pure phase of cylindrical micelles, which were sonicated into seed particles of LN 98 nm. Through simple additi...

One-dimensional (1D) nanostructures, such as cylinders, fibers and tubes, have garnered increasing attention in a variety of fields. Amongst these, their popularity in polymer science is owed to their rich variety of properties. For example, Geng et al. demonstrated that filomicelles exhibit a tenfold increase in residence time in the bloodstream of a rodent model compared to their spherical counterparts, and Won et al. revealed that polybutadiene-b-poly(ethylene oxide) fiber dispersions display an increase in storage modulus by two orders of magnitude upon crosslinking of the core during rheological measurements1,2. Interestingly, many of these systems are synthesized via the self-assembly of block copolymers, whether this be through more traditional methods of solvent switching and thin-film rehydration3, or more advanced methods such as polymerization-induced self-assembly and crystallization-driven self-assembly (CDSA)4,5. Each technique holds their own advantages, however, only CDSA can produce rigid particles with a uniform and controllable length distribution.
Pioneering work by Gilroy et al. formed long polyferrocenylsilane-b-polydimethylsiloxane (PFS-PDMS) cylinders in hexanes and, when using mild sonication, very short cylinders with a low contour length dispersity (Ln). Upon the addition of a predetermined mass of diblock copolymer chains in a common solvent, cylinders of varying lengths with an Ln as low as 1.03 were synthesised5,6. Further work by the Manners group highlighted the high degree of control possible with the PFS system, which may be used to form remarkably complex and hierarchal structures: block-co-micelles, scarf shaped and dumbbell micelles to name a few7,8. Following these demonstrations, researchers investigated other, more functional systems for CDSA including: semi-crystalline commodity polymers (polyethylene, poly(&#949;-caprolactone), polylactide)9,10,11,12,13 and conducting polymers (poly(3-hexylthiophene), polyselenophene)14,15. Armed with this toolbox of diblock copolymer systems that can be assembled quickly and efficiently, researchers have carried out more application-driven research in recent years16.&#160; Jin et al. have demonstrated exciton diffusion lengths in the hundreds of nanometers in polythiophene block copolymers and our group demonstrated the formation of gels from poly(&#949;-caprolactone) (PCL) containing cylindrical constructs10,17.
Although it is a powerful technique, CDSA does have its limitations. The block copolymers must have a semi-crystalline component, as well as low dispersity values and high end group fidelities; lower order block contaminants may cause particle aggregation or induce morphology changes18,19. Due to these restrictions, living polymerizations are used. However, significant reagent purification, drying procedures and water/oxygen free environments are required in order to achieve polymers with the aforementioned properties. Attempts have been made to design systems that overcome this. For example, PFS block copolymers have been formed using click chemistry to couple polymer chains together20. Although the resulting cylindrical nanoparticles have demonstrated exemplary properties, the block copolymers are typically purified by preparative size exclusion chromatography and the synthesis of PFS still requires the use of living anionic polymerizations. Our group recently realized the living CDSA of PCL, the success of which revolved around using both living organobase-catalyzed ring-opening polymerizations (ROP) and reversible addition-fragmentation chain transfer (RAFT) polymerizations10. Although this method is simpler, living polymerizations are still required.
As the field is moving towards more application-driven research, and due to the problems associated with living polymerizations, it is believed that an outline of the polymer synthesis and self-assembly protocols will be advantageous to future scientific work. Thus, in this manuscript, the complete synthesis and self-assembly of a PCL-b-PMMA-b-PDMA copolymer is outlined. Drying techniques will be highlighted in the context of an organocatalyzed ROP of &#949;-caprolactone and the subsequent RAFT polymerizations of MMA and DMA will be outlined. Finally, a living CDSA protocol for this polymer in ethanol will be presented and common errors in characterization data due to poor experimental technique will be critiqued.

<table>
	<tbody>
		<tr>
			<td>2,2&#39;-azobisisobutyrnitrile</td>
			<td>Sigma Aldrich</td>
			<td></td>
			<td></td>
		</tr>
		<tr>
			<td>250 mL ampoule</td>
			<td></td>
			<td></td>
			<td></td>
		</tr>
		<tr>
			<td>250 mL two neck RBF</td>
			<td></td>
			<td></td>
			<td></td>
		</tr>
		<tr>
			<td>Ampoule (25 mL)</td>
			<td></td>
			<td></td>
			<td></td>
		</tr>
		<tr>
			<td>B19 tap</td>
			<td></td>
			<td></td>
			<td></td>
		</tr>
		<tr>
			<td>B24 stopper</td>
			<td></td>
			<td></td>
			<td></td>
		</tr>
		<tr>
			<td>Basic Alumina</td>
			<td>Fluka</td>
			<td></td>
			<td></td>
		</tr>
		<tr>
			<td>Buchner Flask</td>
			<td></td>
			<td></td>
			<td></td>
		</tr>
		<tr>
			<td>Buchner Funnel</td>
			<td></td>
			<td></td>
			<td></td>
		</tr>
		<tr>
			<td>Caclium Hydride</td>
			<td></td>
			<td></td>
			<td></td>
		</tr>
		<tr>
			<td>Cannulae</td>
			<td></td>
			<td></td>
			<td></td>
		</tr>
		<tr>
			<td>caprolactone</td>
			<td>Arcos Organics</td>
			<td></td>
			<td></td>
		</tr>
		<tr>
			<td>Chain Transfer Agent</td>
			<td>Made in House</td>
			<td></td>
			<td></td>
		</tr>
		<tr>
			<td>Conical Flask (multiple sizes)</td>
			<td></td>
			<td></td>
			<td></td>
		</tr>
		<tr>
			<td>Dessicator</td>
			<td></td>
			<td></td>
			<td></td>
		</tr>
		<tr>
			<td>Diethyl Ether</td>
			<td>Merck</td>
			<td></td>
			<td></td>
		</tr>
		<tr>
			<td>Dioxane</td>
			<td>Fisher</td>
			<td></td>
			<td></td>
		</tr>
		<tr>
			<td>diphenylphosphate</td>
			<td>Sigma Aldrich</td>
			<td></td>
			<td></td>
		</tr>
		<tr>
			<td>Distillation Condenser</td>
			<td></td>
			<td></td>
			<td></td>
		</tr>
		<tr>
			<td>Ethanol</td>
			<td>Fisher</td>
			<td></td>
			<td></td>
		</tr>
		<tr>
			<td>Filter Paper (multiple sizes)</td>
			<td></td>
			<td></td>
			<td></td>
		</tr>
		<tr>
			<td>Gel Permeation Chrmoatography Instrument</td>
			<td>Agilent Technologies Infinity 1260 II</td>
			<td></td>
			<td>Running DMF at 50 &#176;C</td>
		</tr>
		<tr>
			<td>Glovebox</td>
			<td>Mbraun, Unilab</td>
			<td></td>
			<td></td>
		</tr>
		<tr>
			<td>Hotplate</td>
			<td>IKA, RCT basic</td>
			<td></td>
			<td></td>
		</tr>
		<tr>
			<td>Mercury Thermometer</td>
			<td></td>
			<td></td>
			<td></td>
		</tr>
		<tr>
			<td>Methyl Methacrylate</td>
			<td>Sigma Aldrich</td>
			<td></td>
			<td></td>
		</tr>
		<tr>
			<td>Molecular seives</td>
			<td>Fisher</td>
			<td>MS/1030/53</td>
			<td></td>
		</tr>
		<tr>
			<td>N,N-dimethyl acrylamide</td>
			<td>Sigma Aldrich</td>
			<td></td>
			<td></td>
		</tr>
		<tr>
			<td>NMR spectrometer</td>
			<td>Bruker 400 MHz</td>
			<td></td>
			<td></td>
		</tr>
		<tr>
			<td>Phosphorus pentoxide</td>
			<td>Sigma Aldrich</td>
			<td></td>
			<td></td>
		</tr>
		<tr>
			<td>RBF (multiple sizes)</td>
			<td></td>
			<td></td>
			<td></td>
		</tr>
		<tr>
			<td>Schlenk Cap (B24)</td>
			<td></td>
			<td></td>
			<td></td>
		</tr>
		<tr>
			<td>Schlenk Flask (250 mL)</td>
			<td></td>
			<td></td>
			<td></td>
		</tr>
		<tr>
			<td>Schlenk Line</td>
			<td></td>
			<td></td>
			<td></td>
		</tr>
		<tr>
			<td>Sonication Probe</td>
			<td>Bandelin Sonoplus</td>
			<td></td>
			<td></td>
		</tr>
		<tr>
			<td>Suba Seal (multiple sizes)</td>
			<td></td>
			<td></td>
			<td></td>
		</tr>
		<tr>
			<td>TEM grids</td>
			<td>EmResolutions, Formvar/carbon film 300 mesh copper</td>
			<td></td>
			<td></td>
		</tr>
		<tr>
			<td>THF</td>
			<td>Merck</td>
			<td></td>
			<td></td>
		</tr>
		<tr>
			<td>three neck adaptor</td>
			<td></td>
			<td></td>
			<td></td>
		</tr>
		<tr>
			<td>Toluene</td>
			<td>Fisher</td>
			<td></td>
			<td></td>
		</tr>
		<tr>
			<td>Transmission Electron Microscope</td>
			<td>Jeol 2100</td>
			<td></td>
			<td></td>
		</tr>
	</tbody>
</table>

synthesis of monodisperse cylindrical nanoparticles via crystallization-driven self-assembly of biodegradable block copolymers

The production of monodisperse cylindrical micelles is a significant challenge in polymer chemistry. Most cylindrical constructs formed from diblock copolymers are produced by one of three techniques: thin film rehydration, solvent switching or polymerization-induced self-assembly, and produce only flexible, polydisperse cylinders. Crystallization-driven self-assembly (CDSA) is a method which can produce cylinders with these properties, by stabilizing structures of a lower curvature due to the formation of a crystalline core. However, the living polymerization techniques by which most core-forming blocks are formed are not trivial processes and the CDSA process may yield unsatisfactory results if carried out incorrectly. Here, the synthesis of cylindrical nanoparticles from simple reagents is shown. The drying and purification of reagents prior to a ring-opening polymerization of &#949;-caprolactone catalyzed by diphenyl phosphate is described. This polymer is then chain extended by methyl methacrylate (MMA) followed by N,N-dimethyl acrylamide (DMA) using reversible addition&#8722;fragmentation chain-transfer (RAFT) polymerization, affording a triblock copolymer that can undergo CDSA in ethanol. The living CDSA process is outlined, the results of which yield cylindrical nanoparticles up to 500 nm in length and a length dispersity as low as 1.05. It is anticipated that these protocols will allow others to produce cylindrical nanostructures and elevate the field of CDSA in the future.

PCL was analyzed by 1H NMR spectroscopy and gel permeation chromatography (GPC). The 1H NMR spectrum yielded a degree of polymerization (DP) of 50, by comparison of resonances at 3.36 ppm and 4.08 ppm, which correspond to the end group ethyl protons and the in-chain ester &#945;-protons respectively (Figure 1b). This provided validation of the molecular weight values obtained by GPC where a single peak, with a dispersity value of 1.07, w...

Watch this Scientific Journal Video about Synthesis of Monodisperse Cylindrical Nanoparticles via Crystallization-driven Self-assembly of Biodegradable Block Copolymers at JoVE.com

Synthesis of Monodisperse Cylindrical Nanoparticles via Crystallization-driven Self-assembly of Biodegradable Block Copolymers

Crystallization-driven self-assembly (CDSA) displays the unique ability to fabricate cylindrical nanostructures of narrow length distributions. The organocatalyzed ring-opening polymerization of &#949;-caprolactone and subsequent chain extensions of methyl methacrylate and N,N-dimethyl acrylamide are demonstrated. A living CDSA protocol that produces monodisperse cylinders up to 500 nm in length is outlined.

The production of monodisperse cylindrical micelles is a significant challenge in polymer chemistry. Most cylindrical constructs formed from diblock ...

Our protocol focuses on both ring-opening and RAFT polymerizations to produce block copolymer cylinders of a controlled length using living crystallization-driven self-assembly. The combination of both ring-opening and RAFT polymerizations allows the production of polymers with both semi-crystalline and functional regions. This opens the field of CDSA to other potential applications.The success of the protocol resolves around the dryness of the starting reagents. Make sure the system never comes into contact with the atmosphere once the drying procedure has begun. The method requires knowledge in air-sensitive chemistry techniques.We believe that committing these practices to video form will give researchers freedom to introduce new ideas without hindrance from a lack of practical experience. To begin, transfer all glassware and stir bars, dried in a 150 degrees Celsius oven overnight, to the bench. Clamp the two-neck 250-milliliter round-bottom flask, equipped with a stir bar, on a stand over a stir plate, and secure an air-tight tap on the small neck.Add 100 milliliters of epsilon-caprolactone to the flask. Connect the round-bottom flask to a nitrogen line through the tap on one neck. Under a steady flow of nitrogen at three psi, add one gram of calcium hydride into the flask through the primary neck.Fit the second neck with a glass stopper, and stir overnight at room temperature under a nitrogen atmosphere. Attack the flask to the Schlenk line, and open to a steady flow of nitrogen. Assemble the vacuum distillation equipment on two stands, by clamping the epsilon-caprolactone round-bottom flask to one stand and another round-bottom flask to the other stand.Maintain a steady flow of nitrogen through the system to prevent water from entering the system. Insert a thermometer into the still head, and seal in place. Attach the adapter to the Schlenk line.Turn off the nitrogen flow, and open the system to vacuum through this new connection to the Schlenk line. Heat the epsilon-caprolactone in a 60-to-80-degrees heating mantle, collecting the first five milliliters in the small round-bottom flasks and the rest in the two-neck round-bottom flask. Place the flasks in liquid nitrogen to condense the caprolactone effectively.To speed up the process, wrap the distillation equipment in cotton wool and foil. Attach the Schlenk line to the two-neck round-bottom flask. Turn the line to vacuum for 120 seconds and to nitrogen for 10 seconds, a total of three times, to purge the line.Open the line and the system to nitrogen. Then add one gram of calcium hydride to the collection flask fit with a stopper, and stir under a nitrogen atmosphere overnight. Meanwhile, dispose of the excess calcium hydride by dropwise addition of 10 milliliters of isopropanol, followed by five milliliters of methanol.Once bubbling ceases, add an excess of water. Rinse the distillation equipment with acetone, and place in the oven overnight. In the morning, repeat the vacuum distillation again without adding calcium hydride to the monomer once finished.Then open the flask to nitrogen to start transferring the caprolactone, via cannula, into an ampule. Transfer the ampule to a glove box. In the glove box, prepare stock solutions.Into three separate vials, add 0.011 grams of hydroxyl chain transfer agent, as initiator, 0.01 grams of diphenyl phosphate, as catalyst, and 0.25 grams of the dried monomer, caprolactone. Add 0.5 milliliters of toluene to each of the initiator and catalyst vials, and gently agitate until the reagents are dissolved. Then mix the initiator and diphenyl phosphate stock solutions into one vial, and add a stir bar.Fix the vial on a stirrer, adjust the speed to moderate stirring, and add the monomer solution into the initiator-catalyst vial. Fit the vial with a lid, and stir for eight hours at room temperature. Then remove the vial from the glove box, and immediately use a Pasteur pipette to add the mixture, dropwise, into an excess of cold diethyl ether, to precipitate.Through a Buchner funnel, filter the white solid, dry in the ambient atmosphere, and dissolve it in one milliliter of tetrahydrofuran. Precipitate in diethyl ether twice more, and dry thoroughly. First prepare several basic alumina plugs in three-milliliter syringes.Filter the dioxane and MMA into separate vials to remove stabilizers. Weigh 0.5 grams of the previously synthesized PCL, 0.424 grams of MMA, measure two milliliters of dioxane into a vial, and allow to dissolve. Prepare a pure AIBN stock solution of 10 milligrams per milliliter, and pipette 139 microliters into the reaction mixture.Transfer the mixture into an ampule equipped with a stir bar, and seal. Next attach the ampule to the Schlenk line, and place into liquid nitrogen. Once the solution is frozen, introduce the ampule to vacuum until the vacuum gauge reads at most one times 10 to the negative one millibar.Close the ampule, and allow to thaw completely. Repeat this freeze-pump-thaw cycle two additional times. Upon completion of the last cycle, backfill the ampule with nitrogen, and place it into a preheated oil bath at 65 degrees Celsius for four hours.To monitor conversion, obtain the ampule from the oil bath, switch the cap for super seal under a flow of nitrogen, extract two drops, mix with 600 microliters of deuterated chloroform in a vial, and transfer to an NMR tube. Transfer the sample to the autosampler of an NMR instrument to run a proton spectrum. Replace the cap whilst under a steady flow of nitrogen, and place back into the oil bath.Now, place the ampule that has been heated in the oil bath into liquid nitrogen until frozen, and then in a fume hood, open the ampule to air to quench the polymerization for one minute. Next, dropwise add the mixture into a vast excess of cold diethyl ether to precipitate. Isolate by Buchner filtration, and dry.Dissolve the polymer and tetrahydrofuran, and precipitate twice more. Dry the polymer thoroughly for proton NMR spectroscopy and SEC analysis. Repeat this procedure with 0.5 grams of the generated PCL-PMMA, 1.406 grams of DMA, two milliliters of dioxane, and 111 microliters of ten milligrams per milliliter AIBN and dioxane.Heat the polymerization at 70 degrees Celsius for one hour, and precipitate the reaction mixture in cold diethyl ether three times. Place five milligrams of the generated triblock copolymer into a vial, and add one milliliter of ethanol. Seal the vial with lid and parafilm.Heat at 70 degrees Celsius and a heating mantle for three hours. After that, take the vial out to cool slowly to room temperature. Leave the solution to age at room temperature for two weeks.The solution turns cloudy and forms a distinct layer at the bottom when fully assembled. Dilute the dispersion to one milligram per milliliter with ethanol in a sonication-proof tube. Place the tube in an ice bath.Insert the tip of the sonication probe into the middle area of the dispersion. Sonicate the solution for 15 cycles of two minutes at the lowest intensity, allowing to cool for 15 minutes between cycles. Take an aliquot of the sonicated seed dispersion and dilute to 0.18 milligrams per milliliter with ethanol in a tube.Then, prepare a solution of unimer and tetrahydrofuran to the concentration of 25 milligrams per milliliter. Add 32.8 microliters of the unimer solution into the diluted seed dispersion and gently shake to allow full dissolution. Leave the dispersion to age for three days with the lid slightly ajar, so the tetrahydrofuran can evaporate.This will produce 90 nanometer starting seeds to 500 nanometer cylinders. Ring-opening polymerization of epsilon-caprolactone resulted in a degree of polymerization of 50, determined by the proton NMR spectrum with resonances of the end-group ethyl protons at 3.36 PPM, and the end-chain ester alpha protons at 4.08 PPM. GPC trace shows a typical molecular weight distribution with a single peak, having a dispersity value of 1.07 and a number average molecular weight of 10, 800 grams per mole.By comparison, polymerization that was reacted for 12 hours gave a high molecular weight shoulder at 15, 500 grams per mole. Using reagents not correctly dried yielded a product mixture with a low molecular weight tail. The successive RAFT polymerizations achieved a degree of polymerization of 10 for the PMMA block with a unimodal peak in the GPC trace.However, when deliberately taken to too high conversions greater than 70 percent, a broadening of molecular weight and a high molecular weight shoulder was observed. The degree of polymerization of the final block of PDMA was 200, upon comparison of the PCL end-chain ether protons at 4.08 PPM and the DMA side-chain methyl protons at 2.93 PPM. The GPC trace was narrow and unimodal.Upon repetition of the chain extension using impure PCL-PMMA, a low molecular weight shoulder appeared. Remember to take your time on drying the system, as any presence of water can cause the polymerization of caprolactone to fail. Make sure everything is dry.A buffer region between the core and corona of the cylinder could allow other CDSA construct to be stabilized in water, opening new avenues of research and collaboration.

synthesis-monodisperse-cylindrical-nanoparticles-via-crystallization

Research

JoVE Journal

Chemistry

Origami Inspired Self-assembly of Patterned and Reconfigurable Particles

There are numerous techniques such as photolithography, electron-beam lithography and soft-lithography that can be used to precisely pattern two dimensional (2D) structures. These technologies are mature, offer high precision and many of them can be implemented in a high-throughput manner. We leverage the advantages of planar lithography and combine them with self-folding methods1-20 wherein physical forces derived from surface tension or residual stress, are used to curve or fold planar structures into three dimensional (3D) structures. In doing so, we make it possible to mass produce precisely patterned static and reconfigurable particles that are challenging to synthesize.
In this paper, we detail visualized experimental protocols to create patterned particles, notably, (a) permanently bonded, hollow, polyhedra that self-assemble and self-seal due to the minimization of surface energy of liquefied hinges21-23 and (b) grippers that self-fold due to residual stress powered hinges24,25. The specific protocol described can be used to create particles with overall sizes ranging from the micrometer to the centimeter length scales. Further, arbitrary patterns can be defined on the surfaces of the particles of importance in colloidal science, electronics, optics and medicine. More generally, the concept of self-assembling mechanically rigid particles with self-sealing hinges is applicable, with some process modifications, to the creation of particles at even smaller, 100 nm length scales22, 26 and with a range of materials including metals21, semiconductors9 and polymers27. With respect to residual stress powered actuation of reconfigurable grasping devices, our specific protocol utilizes chromium hinges of relevance to devices with sizes ranging from 100 &mu;m to 2.5 mm. However, more generally, the concept of such tether-free residual stress powered actuation can be used with alternate high-stress materials such as heteroepitaxially deposited semiconductor films5,7 to possibly create even smaller nanoscale grasping devices.

We describe experimental details of the synthesis of patterned and reconfigurable particles from two dimensional (2D) precursors. This methodology can be used to create particles in a variety of shapes including polyhedra and grasping devices at length scales ranging from the micro to centimeter scale.

There are numerous techniques such as photolithography, electron-beam lithography and soft-lithography that can be used to precisely pattern two ...

Formation of Ordered Biomolecular Structures by the Self-assembly of Short Peptides

In nature, complex functional structures are formed by the self-assembly of biomolecules under mild conditions. Understanding the forces that control self-assembly and mimicking this process in vitro will bring about major advances in the areas of materials science and nanotechnology. Among the available biological building blocks, peptides have several advantages as they present substantial diversity, their synthesis in large scale is straightforward, and they can easily be modified with biological and chemical entities1,2. Several classes of designed peptides such as cyclic peptides, amphiphile peptides and peptide-conjugates self-assemble into ordered structures in solution. Homoaromatic dipeptides, are a class of short self-assembled peptides that contain all the molecular information needed to form ordered structures such as nanotubes, spheres and fibrils3-8. A large variety of these peptides is commercially available.
This paper presents a procedure that leads to the formation of ordered structures by the self-assembly of homoaromatic peptides. The protocol requires only commercial reagents and basic laboratory equipment. In addition, the paper describes some of the methods available for the characterization of peptide-based assemblies. These methods include electron and atomic force microscopy and Fourier-Transform Infrared Spectroscopy (FT-IR). Moreover, the manuscript demonstrates the blending of peptides (coassembly) and the formation of a &#34;beads on a string&#34;-like structure by this process.9 The protocols presented here can be adapted to other classes of peptides or biological building blocks and can potentially lead to the discovery of new peptide-based structures and to better control of their assembly.

This paper describes the formation of highly ordered peptide-based structures by the spontaneous process of self-assembly. The method utilizes commercially available peptides and common lab equipment. This technique can be applied to a large variety of peptides and may lead to the discovery of new peptide-based assemblies.

In nature, complex functional structures are formed by the self-assembly of biomolecules under mild conditions. Understanding the forces that control ...

Self-assembly of Complex Two-dimensional Shapes from Single-stranded DNA Tiles

Current methods in DNA nano-architecture have successfully engineered a variety of 2D and 3D structures using principles of self-assembly. In this article, we describe detailed protocols on how to fabricate sophisticated 2D shapes through the self-assembly of uniquely addressable single-stranded DNA tiles which act as molecular pixels on a molecular canvas. Each single-stranded tile (SST) is a 42-nucleotide DNA strand composed of four concatenated modular domains which bind to four neighbors during self-assembly. The molecular canvas is a rectangle structure self-assembled from SSTs. A prescribed complex 2D shape is formed by selecting the constituent molecular pixels (SSTs) from a 310-pixel molecular canvas and then subjecting the corresponding strands to one-pot annealing. Due to the modular nature of the SST approach we demonstrate the scalability, versatility and robustness of this method. Compared with alternative methods, the SST method enables a wider selection of information polymers and sequences through the use of de novo designed and synthesized short DNA strands.

DNA tiling is an effective approach to make programmable nanostructures. We describe the protocols to construct complex two-dimensional shapes by the self-assembly of single-stranded DNA tiles.

Current methods in DNA nano-architecture have successfully engineered a variety of 2D and 3D structures using principles of self-assembly. In this ...

Functionalization of Single-walled Carbon Nanotubes with Thermo-reversible Block Copolymers and Characterization by Small-angle Neutron Scattering

We demonstrate a protocol for single-walled carbon nanotube functionalization using thermo-sensitive PEO-PPO-PEO triblock copolymers in an aqueous solution. In a carbon nanotube/PEO105-PPO70-PEO105 (poloxamer 407) aqueous solution, the amphiphilic poloxamer 407 adsorbs onto the carbon nanotube surfaces and self-assembles into continuous layers, driven by intermolecular interactions between constituent molecules. The addition of 5-methylsalicylic acid changes the self-assembled structure from spherical-micellar to a cylindrical morphology. The fabricated poloxamer 407/carbon nanotube hybrid particles exhibit thermo-responsive structural features so that the density and thickness of poloxamer 407 layers are also reversibly controllable by varying temperature. The detailed structural properties of the poloxamer 407/carbon nanotube particles in suspension can be characterized by small-angle neutron scattering experiments and model fit analyses. The distinct curve shapes of the scattering intensities depending on temperature control or addition of aromatic additives are well described by a modified core-shell cylinder model consisting of a carbon nanotube core cylinder, a hydrophobic shell, and a hydrated polymer layer. This method can provide a simple but efficient way for the fabrication and in-situ characterization of carbon nanotube-based nano particles with a structure-tunable encapsulation.

A method for the functionalization of carbon nanotubes with structure-tunable polymeric encapsulation layers and structural characterization using small-angle neutron scattering is presented.

We demonstrate a protocol for single-walled carbon nanotube functionalization using thermo-sensitive PEO-PPO-PEO triblock copolymers in an aqueous ...

Synthesis of Protein Bioconjugates via Cysteine-maleimide Chemistry

The chemical linking or bioconjugation of proteins to fluorescent dyes, drugs, polymers and other proteins has a broad range of applications, such as the development of antibody drug conjugates (ADCs) and nanomedicine, fluorescent microscopy and systems chemistry. For many of these applications, specificity of the bioconjugation method used is of prime concern. The Michael addition of maleimides with cysteine(s) on the target proteins is highly selective and proceeds rapidly under mild conditions, making it one of the most popular methods for protein bioconjugation.
We demonstrate here the modification of the only surface-accessible cysteine residue on yeast cytochrome c with a ruthenium(II) bisterpyridine maleimide. The protein bioconjugation is verified by gel electrophoresis and purified by aqueous-based fast protein liquid chromatography in 27% yield of isolated protein material. Structural characterization with MALDI-TOF MS and UV-Vis is then used to verify that the bioconjugation is successful. The protocol shown here is easily applicable to other cysteine - maleimide coupling of proteins to other proteins, dyes, drugs or polymers.

Synthesis of Protein Bioconjugates via Cysteine-maleimide Chemistry

This protocol details the important steps required for the bioconjugation of a cysteine containing protein to a maleimide, including reagent purification, reaction conditions, bioconjugate purification and bioconjugate characterization.

The chemical linking or bioconjugation of proteins to fluorescent dyes, drugs, polymers and other proteins has a broad range of applications, such as the ...

Liquid-cell Transmission Electron Microscopy for Tracking Self-assembly of Nanoparticles

Drying a nanoparticle dispersion is a versatile way to create self-assembled structures of nanoparticles, but the mechanism of this process is not fully understood. We have traced the trajectories of individual nanoparticles using liquid-cell transmission electron microscopy (TEM) to investigate the mechanism of the assembly process. Herein, we present the protocols used for liquid-cell TEM studies of the self-assembly mechanism. First, we introduce the detailed synthetic protocols used to produce uniformly sized platinum and lead selenide nanoparticles. Next, we present the microfabrication processes used to produce liquid cells with silicon nitride or silicon windows and then describe the loading and imaging procedures of the liquid-cell TEM technique. Several notes are included to provide helpful tips for the entire process, including how to manage the fragile cell windows. The individual motions of nanoparticles tracked by liquid-cell TEM revealed that changes in the solvent boundaries caused by evaporation affected the self-assembly process of nanoparticles. The solvent boundaries drove nanoparticles to primarily form amorphous aggregates, followed by flattening of the aggregates to produce a 2-dimensional (2D) self-assembled structure. These behaviors are also observed for different nanoparticle types and different liquid-cell compositions.

Here we introduce experimental protocols for the real-time observation of a self-assembly process using liquid-cell transmission electron microscopy.

Drying a nanoparticle dispersion is a versatile way to create self-assembled structures of nanoparticles, but the mechanism of this process is not fully ...

Synthesis of a Thiol Building Block for the Crystallization of a Semiconducting Gyroidal Metal-sulfur Framework

We present a method for preparing thioester molecules as the masked form of the thiol linkers and their utilization for accessing a semiconducting and porous metal-dithiolene network in the highly ordered single crystalline state. Unlike the highly reactive free-standing thiols, which tend to decompose and complicate the crystallization of metal-thiolate open frameworks, the thioester reacts in situ to provide the thiol species, serving to mitigate the reaction between the mercaptan units and the metal centers, and to improve crystallization consequently. Specifically, the thioester was synthesized in a one-pot procedure: an aromatic bromide (hexabromotriphenylene) reacted with excess sodium thiomethoxide under vigorous conditions to first form the thioether intermediate product. The thioether was then demethylated by the excess thiomethoxide to provide the thiolate anion that was acylated to form the thioester product. The thioester was conveniently purified by standard column chromatography, and then used directly in the framework synthesis, wherein NaOH and ethylenediamine serve to revert in situ the thioester to the thiol linker for assembling the single-crystalline Pb(II)-dithiolene network. Compared with other methods for thiol synthesis (e.g., by cleaving alkyl thioether using sodium metal and liquid ammonia), the thioester synthesis here uses simple conditions and economical reagents. Moreover, the thioester product is stable and can be conveniently handled and stored. More importantly, in contrast to the generic difficulty in accessing crystalline metal-thiolate open frameworks, we demonstrate that using the thioester for in situ formation of the thiol linker greatly improves the crystallinity of the solid-state product. We intend to encourage broader research efforts on the technologically important metal-sulfur frameworks by disclosing the synthetic protocol for the thioester as well as the crystalline framework solid.

Here, we present a one-pot, transition-metal-free synthesis of thiols and thioesters from aromatic halides and sodium thiomethoxide, followed by the preparation of single crystals of a metal-dithiolene network using thiol species generated in situ from the more stable and tractable thioester.

We present a method for preparing thioester molecules as the masked form of the thiol linkers and their utilization for accessing a semiconducting and ...

Synthesis of Substrate-Bound Au Nanowires Via an Active Surface Growth Mechanism

Advancing synthetic capabilities is important for the development of nanoscience and nanotechnology. The synthesis of nanowires has always been a challenge, as it requires asymmetric growth of symmetric crystals. Here, we report a distinctive synthesis of substrate-bound Au nanowires. This template-free synthesis employs thiolated ligands and substrate adsorption to achieve the continuous asymmetric deposition of Au in solution at ambient conditions. The thiolated ligand prevented the Au deposition on the exposed surface of the seeds, so the Au deposition only occurs at the interface between the Au seeds and the substrate. The side of the newly deposited Au nanowires is immediately covered with the thiolated ligand, while the bottom facing the substrate remains ligand-free and active for the next round of Au deposition. We further demonstrate that this Au nanowire growth can be induced on various substrates, and different thiolated ligands can be used to regulate the surface chemistry of the nanowires. The diameter of the nanowires can also be controlled with mixed ligands, in which another &#34;bad&#34; ligand could turn on the lateral growth. With the understanding of the mechanism, Au nanowire-based nanostructures can be designed and synthesized.

We report a solution-based method to synthesize substrate-bound Au nanowires. By tuning the molecular ligands used during the synthesis, the Au nanowires can be grown from various substrates with different surface properties. Au nanowire-based nanostructures can also be synthesized by adjusting the reaction parameters.

Advancing synthetic capabilities is important for the development of nanoscience and nanotechnology. The synthesis of nanowires has always been a ...

Molten-Salt Synthesis of Complex Metal Oxide Nanoparticles

The development of feasible synthesis methods is critical for the successful exploration of novel properties and potential applications of nanomaterials. Here, we introduce the molten-salt synthesis (MSS) method for making metal oxide nanomaterials. Advantages over other methods include its simplicity, greenness, reliability, scalability, and generalizability. Using pyrochlore lanthanum hafnium oxide (La2Hf2O7) as a representative, we describe the MSS protocol for the successful synthesis of complex metal oxide nanoparticles (NPs). Furthermore, this method has the unique ability to produce NPs with different material features by changing various synthesis parameters such as pH, temperature, duration, and post-annealing. By fine-tuning these parameters, we are able to synthesize highly uniform, non-agglomerated, and highly crystalline NPs. As a specific example, we vary the particle size of the La2Hf2O7&#160;NPs by changing the concentration of the ammonium hydroxide solution used in the MSS process, which allows us to further explore the effect of particle size on various properties. It is expected that the MSS method will become a more popular synthesis method for nanomaterials and more widely employed in the nanoscience and nanotechnology community in the upcoming years.

Here, we demonstrate a unique, relatively low-temperature, molten-salt synthesis method for preparing uniform complex metal oxide lanthanum hafnate nanoparticles.

The development of feasible synthesis methods is critical for the successful exploration of novel properties and potential applications of nanomaterials. ...

Methionine Functionalized Biocompatible Block Copolymers for Targeted Plasmid DNA Delivery

Reversible addition-fragmentation chain transfer (RAFT) polymerization integrates the advantages of radical polymerization and living polymerization. This work presents the preparation of methionine functionalized biocompatible block copolymers via RAFT polymerization. Firstly, N,N-bis(2-hydroxyethyl)methacrylamide-b-N-(3-aminopropyl)methacrylamide (BNHEMA-b-APMA, BA) was synthesized via RAFT polymerization using 4,4&#8217;-azobis(4-cyanovaleric acid) (ACVA) as an initiating agent and 4-cyanopentanoic acid dithiobenzoate (CTP) as the chain transfer agent. Subsequently, N,N-bis(2-hydroxyethyl)methacrylamide-b-N-(3-guanidinopropyl)methacrylamide (methionine grafted BNHEMA-b-GPMA, mBG) was prepared by modifying amine groups in APMA with methionine and guanidine groups. Three kinds of block polymers, mBG1, mBG2, and mBG3, were synthesized for comparison. A ninhydrin reaction was used to quantify the APMA content; mBG1, mBG2, and mBG3 had 21%, 37%, and 52% of APMA, respectively. Gel permeation chromatography (GPC) results showed that BA copolymers possess molecular weights of 16,200 (BA1), 20,900(BA2), and 27,200(BA3) g/mol. The plasmid DNA (pDNA) complexing ability of the obtained block copolymer gene carriers was also investigated. The charge ratios (N/P) were 8, 16, and 4 when pDNA was complexed completely with mBG1, mBG2, mBG3, respectively. When the N/P ratio of mBG/pDNA polyplexes was higher than 1, the Zeta potential of mBG was positive. At an N/P ratio between 16 and 32, the average particle size of mBG/pDNA polyplexes was between 100-200 nm. Overall, this work illustrates a simple and convenient protocol for the block copolymer carrier synthesis.

This work presents the preparation of methionine functionalized biocompatible block copolymers (mBG) via the reversible addition-fragmentation chain transfer (RAFT) method. The plasmid DNA complexing ability of the obtained mBG and their transfection efficiency were also investigated. The RAFT method is very beneficial for polymerizing monomers containing special functional groups.

Reversible addition-fragmentation chain transfer (RAFT) polymerization integrates the advantages of radical polymerization and living polymerization. This ...