我々は、イネスRackéの技術支援に感謝したい。

パート1：CBB染色液の調製<ol><li> CBB G - 250の60〜80 mgを2〜4時間攪拌することにより二回蒸留水1リットルに溶解されています。最後に、濃塩酸3mlを別分間攪拌しながら濃い青色溶液に添加し、後で使用するために暗所に保存されます。解決策は、その染色の効率を失うことなく、数ヶ月に数週間まで保存することができます。 </li><li>濃塩酸は、換気フードの下に使用される通常のケアのウントに取り扱ってください。最終的な解決策は、pH約2になる、手袋を使用する必要があると皮膚との接触を避けるべきであるように。 </li></ol>パート2：SDS - PAGE <ol><li>タンパク質サンプルの適切なアリコートは1 ×ローディングバッファーの最終濃度になるようにバッファーをロードすると混合されています。我々は、125mmのTris/H3PO4（25 ° CでpH 7.5）を、2mMのEDTA、4％SDS、200mmのDTT、0.02％ブロモフェノールブルー、50％グリセロールで2 ×ローディングバッファーを使用。 SDS - PAGEのための他のローディングバッファも同様に使用できます。 </li><li>タンパク質サンプルをロードする前に、約5分間加熱する。一方、ゲル電気泳動槽は、実行用に準備されます。我々はX細胞SureLockで©ビス - トリスゲル（Invitrogen）® MES -バッファ付きミニ細胞（Invitrogen）を実行しているバッファが、その他のゲルや電気泳動システムとしても使用することができるプレキャスト4-12％NuPAGEを使用してください。 </li><li>タンパク質サンプルは、220Vで50分間実行ゲル電気泳動でロードされます。 </li></ol>パート3：ゲルの染色<ol><li>ゲルカセットを分解し、ゲルは、その後の洗浄ステップのボックスに配置されます。 </li><li>蒸留水約100mlをゲルに添加し、30秒間電子レンジで加熱される。沸騰が発生する前に加熱を停止する必要があります。ゲルのボックスは、3〜5分間シェーカー上に置かれる。そしてこの洗浄ステップは、新鮮な水で二回繰り返されます。 </li><li>十分なCBB染色液は、ボックス内のゲルと10秒間電子レンジで加熱ボックスをカバーするために追加されます。沸騰せず。ゲルのボックスは、染色の仕上げにシェーカーに置かれます。すでに1分後に、タンパク質のバンドが15〜30分間の後、観察することができます。染色は、ほとんどの場合、十分に強いです。 </li><li>染色液はオフに注ぎ入れ、50〜100ミリリットル蒸留水は、さらにシェーカー上でゲルの明るい青の背景を脱色するために追加された。水は、必要に応じてさら​​に脱色のために新鮮な水に置き換えることができます。 </li><li>ゲルは、スキャン撮影や長期保存用に乾燥させることができる</li></ol>パート4：代表的な結果： 図を参照してください。説明する手順に従って適切に染色したゲルの場合は1。 図を参照してください。十分な長染色と残留SDSが効率的な染色を阻害する前に洗浄されていないゲル2。マーカーレーンが（*）マーカータンパク質の同量を含んでいることに注意してください。 <img src="/files/ftp_upload/1350/Fig1.png" alt="" /> 図。 1：タンパク質の精製の ​​サンプル（：分子量マーカー*）をロードした後に染色した代表ゲル。 <img src="/files/ftp_upload/1350/Fig2.png" alt="" /> 図。 2：CBB染色する前に十分な長さで洗浄されていないCBB染色したゲル。タンパク質バンドは、（マーカーのレーンの*は、図のように同量のタンパク質が含まれている点に注意。1）弱いが表示されます。

<ol>
	<li>Wondrak, E. M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Process+for+fast+visualization+of+protein.">Process for fast visualization of protein.</a> US patent. , (2001).</li><li>Wondrak, E. M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Solution+for+fast+visualization+of+protein.">Solution for fast visualization of protein.</a> US patent. , (2001).</li></ol>

競合する利害関係はありません。上記の手順は、もともと、EM Wondrak（Refを参照してください。）によって特許出願に掲載されました。

<ul><li>洗浄ステップは、タンパク質の効率的な染色のために重要です。 2分または水（&lt;50ミリリットル）の削減量以下に削減、洗浄時間は、ゲル中の残留SDSの高い金額に起因する可能性が最も高い淡いブルーのタンパク質のバンド、になる可能性があります。 </li><li>タンパク質は、質量分析によって分析することを予定している場合のバンドの強度が十分な強さになるまで、電子レンジで加熱ステップは、?...

<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en" lang="en">	
		
		<div>
		<table border="1">
		<thead>
		<tr>
		<th>Material Name</th>
		<th>Type</th>
		<th>Company</th>
		<th>Catalogue Number</th>
		<th>Comment</th>
		</tr>
		</thead>
		<tbody>
		
<tr>
<td>Coomassie Brilliant Blue G-250</td>
<td>&nbsp;</td>
<td>AppliChem</td>
<td>A3480</td>
<td>any other CBB G-250 could be used as well</td>
</tr>
<tr>
<td>Concentrated HCl</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<td>&nbsp;</td>		</tbody>
		</table>
		</div>

staining of proteins in gels with coomassie g-250 without organic solvent and acetic acid

クマシーブリリアントブルー（CBB）、有毒で引火性の有機溶媒（メタノール、エタノールまたは2 - プロパノール）と酢酸の高い内容を持つソリューションを使用して古典的なタンパク質染色のプロトコールで染色し、SDS泳動後のゲル中のタンパク質の脱色、固定のために使用されています- PAGE。頻繁に使用されている短い時間のために電子レンジでの染色溶液を加熱し、手続きのスピードアップに。有毒または有害なメタノール、エタノールまたは2 - プロパノール及び安全性の考慮のために避けるべきラボにおける酢酸の強いにおいの蒸発でこれは通常、結果。もともとEM Wondrak（US2001046709（A1）、US6319720（B1））によって2つの特許出願で公開プロトコルでは、染色液の代替物はないの有機溶媒や酸が使用されていないで説明されています。 CBBは、蒸留水に溶解している（CBB G - 250リットル当たり60 - 80mg）、35 mMの塩酸は、染色液中の唯一の他の化合物として追加されます。ゲルのCBBのstaningは、蒸留水でゲルのSDS - PAGEと徹底した洗浄の後に行われます。洗浄および染色工程中にゲルを加熱することにより、プロセスをより速く仕上げることができるとは有毒または有害なcompundsは蒸発されていません。タンパク質の染色は、溶液を染色でゲルを加熱した後、1分以内にすでに発生し、完全に染色されたタンパク質に影響を与えずに、蒸留水で染色したゲルの長期にわたる洗浄によって完全に脱色され若干青色の背景色の15-30分後に開発されていますバンド。

Watch this Scientific Journal Video about Staining of Proteins in Gels with Coomassie G-250 without Organic Solvent and Acetic Acid at JoVE.com

Staining of Proteins in Gels with Coomassie G-250 without Organic Solvent and Acetic Acid

クマシーブリリアントブルー（CBB）ポリアクリルアミドゲル中でのG - 250によるタンパク質染色用の短いプロトコルは、CBBと古典的な染色の手順のように有機溶剤または酢酸を使用せずに記述されています。

クーマシー有機溶媒および酢酸のないG - 250でゲル中のタンパク質の染色

In classical protein staining protocols using Coomassie Brilliant Blue (CBB), solutions with high contents of toxic and flammable organic solvents ...

staining-proteins-gels-with-coomassie-g-250-without-organic-solvent

Research

JoVE Journal

Biology

52.8K ビュー.  EMBL Heidelberg. クマシーブリリアントブルー（CBB）ポリアクリルアミドゲル中でのG - 250によるタンパク質染色用の短いプロトコルは、CBBと古典的な染色の手順のように有機溶剤または酢酸を使用せずに記述されています。

ビデオ: Staining of Proteins in Gels with Coomassie G-250 without Organic Solvent and Acetic Acid

Staining Proteins in Gels

Following separation by electrophoretic methods, proteins in a gel can be detected by several staining methods. This unit describes protocols for detecting proteins by four popular methods. Coomassie blue staining is an easy and rapid method. Silver staining, while more time consuming, is considerably more sensitive and can thus be used to detect smaller amounts of protein. Fluorescent staining is a popular alternative to traditional staining procedures, mainly because it is more sensitive than Coomassie staining, and is often as sensitive as silver staining. Staining of proteins with SYPRO Orange and SYPRO Ruby are also demonstrated here.

Following separation by electrophoretic methods, proteins in a gel can be detected by several staining methods. Staining of proteins with Coomassie Blue, Silver Staining, SYPRO Orange, SYPRO Ruby are demonstrated in this video.

ゲルでタンパク質を染色

Following separation by electrophoretic methods, proteins in a gel can be detected by several staining methods. This unit describes protocols for ...

生物学

Fast and Sensitive Colloidal Coomassie G-250 Staining for Proteins in Polyacrylamide Gels

Coomassie Brilliant Blue (CBB) is a dye commonly used for the visualization of proteins separated by SDS-PAGE, offering a simple staining procedure and high quantitation. Furthermore, it is completely compatible with mass spectrometric protein identification. But despite these advantages, CBB is regarded to be less sensitive than silver or fluorescence stainings and therefore rarely used for the detection of proteins in analytical gel-based proteomic approaches.
Several improvements of the original Coomassie protocol1 have been made to increase the sensitivity of CBB. Two major modifications were introduced to enhance the detection of low-abundant proteins by converting the dye molecules into colloidal particles: In 1988, Neuhoff and colleagues applied 20% methanol and higher concentrations of ammonium sulfate into the CBB G-250 based staining solution2, and in 2004 Candiano et al. established Blue Silver using CBB G-250 with phosphoric acid in the presence of ammonium sulfate and methanol3. Nevertheless, all these modifications just allow a detection of approximately 10 ng protein. A widely fameless protocol for colloidal Coomassie staining was published by Kang et al. in 2002 where they modified Neuhoff's colloidal CBB staining protocol regarding the complexing substances. Instead of ammonium sulfate they used aluminum sulfate and methanol was replaced by the less toxic ethanol4. The novel aluminum-based staining in Kang's study showed superior sensitivity that detects as low as 1 ng/band (phosphorylase b) with little sensitivity variation depending on proteins.
Here, we demonstrate application of Kang's protocol for fast and sensitive colloidal Coomassie staining of proteins in analytical purposes. We will illustrate the quick and easy protocol using two-dimensional gels routinely performed in our working group.

This video shall popularize a colloidal Coomassie G-250 staining protocol according to Kang et al. for the detection of average 4 ng protein in gels. The staining is completed within 2 hours and without any effort. We routinely use Kang's protocol for analytical purposes in gel-based proteomics.

ポリアクリルアミドゲルでのタンパク質の迅速かつ高感度コロイドクマG - 250染色

Coomassie Brilliant Blue (CBB) is a dye commonly used for the visualization of proteins separated by SDS-PAGE, offering a simple staining procedure and ...

Profiling of Methyltransferases and Other S-adenosyl-L-homocysteine-binding Proteins by Capture Compound Mass Spectrometry (CCMS)

There is a variety of approaches to reduce the complexity of the proteome on the basis of functional small molecule-protein interactions such as affinity chromatography 1 or Activity Based Protein Profiling 2. Trifunctional Capture Compounds (CCs, Figure 1A) 3 are the basis for a generic approach, in which the initial equilibrium-driven interaction between a small molecule probe (the selectivity function, here S-adenosyl-L-homocysteine, SAH, Figure 1A) and target proteins is irreversibly fixed upon photo-crosslinking between an independent photo-activable reactivity function (here a phenylazide) of the CC and the surface of the target proteins. The sorting function (here biotin) serves to isolate the CC - protein conjugates from complex biological mixtures with the help of a solid phase (here streptavidin magnetic beads). Two configurations of the experiments are possible: "off-bead" 4 or the presently described "on-bead" configuration (Figure 1B). The selectivity function may be virtually any small molecule of interest (substrates, inhibitors, drug molecules).
S-Adenosyl-L-methionine (SAM, Figure 1A) is probably, second to ATP, the most widely used cofactor in nature 5, 6. It is used as the major methyl group donor in all living organisms with the chemical reaction being catalyzed by SAM-dependent methyltransferases (MTases), which methylate DNA 7, RNA 8, proteins 9, or small molecules 10. Given the crucial role of methylation reactions in diverse physiological scenarios (gene regulation, epigenetics, metabolism), the profiling of MTases can be expected to become of similar importance in functional proteomics as the profiling of kinases. Analytical tools for their profiling, however, have not been available. We recently introduced a CC with SAH as selectivity group to fill this technological gap (Figure 1A).
SAH, the product of SAM after methyl transfer, is a known general MTase product inhibitor 11. For this reason and because the natural cofactor SAM is used by further enzymes transferring other parts of the cofactor or initiating radical reactions as well as because of its chemical instability 12, SAH is an ideal selectivity function for a CC to target MTases. Here, we report the utility of the SAH-CC and CCMS by profiling MTases and other SAH-binding proteins from the strain DH5&alpha; of Escherichia coli (E. coli), one of the best-characterized prokaryotes, which has served as the preferred model organism in countless biochemical, biological, and biotechnological studies. Photo-activated crosslinking enhances yield and sensitivity of the experiment, and the specificity can be readily tested for in competition experiments using an excess of free SAH.

Profiling of Methyltransferases and Other S-adenosyl-L-homocysteine-binding Proteins by Capture Compound Mass Spectrometry CCMS

Capture Compounds are trifunctional small molecules to reduce the complexity of the proteome by functional reversible small molecule-protein interaction followed by photo-crosslinking and purification. Here we use a Capture Compound with S-adenosyl-L-homocysteine-binding as selectivity function to isolate methyltransferases from an Escherichia coli whole cell lysate and identify them by MS.

メチルトランスフェラーゼのプロファイリングおよびその他の S -アデノシル- L</subキャプチャの複合質量分析法（CCMS）別> -ホモシステイン結合タンパク質

There is a variety of approaches to reduce the complexity of the proteome on the basis of functional small molecule-protein interactions such as affinity ...

Examining the Conformational Dynamics of Membrane Proteins in situ with Site-directed Fluorescence Labeling

Two electrode voltage clamp electrophysiology (TEVC) is a powerful tool to investigate the mechanism of ion transport1 for a wide variety of membrane proteins including ion channels2, ion pumps3, and transporters4. Recent developments have combined site-specific fluorophore labeling alongside TEVC to 
concurrently examine the conformational dynamics at specific residues and function of these proteins on the surface of single cells.
We will describe a method to study the conformational dynamics of membrane proteins by simultaneously monitoring fluorescence and current changes using voltage-clamp fluorometry. This approach can be used to examine the molecular motion of membrane proteins site-specifically following cysteine replacement and site-directed fluorophore labeling5,6. Furthermore, this method provides an approach to determine distance constraints between specific residues7,8. 
This is achieved by selectively attaching donor and acceptor fluorophores to two mutated cysteine residues of interest.
In brief, these experiments are performed following functional expression of the desired protein on the surface of Xenopus leavis oocytes. The large surface area of these oocytes enables facile functional measurements and a robust fluorescence signal5. It is also possible to readily change the extracellular conditions such as pH, ligand or cations/anions, which can provide further information on the mechanism of membrane proteins4. Finally, recent developments 
have also enabled the manipulation of select internal ions following co-expression with a second protein9.
Our protocol is described in multiple parts. First, cysteine scanning mutagenesis proceeded by fluorophore labeling is completed at residues located at the interface of the transmembrane and extracellular domains. Subsequent experiments are designed to identify residues which demonstrate large changes in fluorescence intensity (&lt;5%)3 upon a conformational change of the protein. Second, these changes in fluorescence intensity are compared to the kinetic parameters of 
the membrane protein in order to correlate the conformational dynamics to the function of the protein10. This enables a rigorous biophysical analysis of the molecular motion of the target protein. Lastly, two residues of the holoenzyme can be labeled with a donor and acceptor fluorophore in order to determine distance constraints using donor photodestruction methods. It is also possible to monitor the relative movement of protein subunits following labeling with a donor and acceptor fluorophore.

Examining the Conformational Dynamics of Membrane Proteins in situ with Site-directed Fluorescence Labeling

We will describe a method which measures the kinetics of ion transport of membrane proteins alongside site-specific analysis of conformational changes using fluorescence on single cells. This technique is adaptable to ion channels, transporters and ion pumps and can be utilized to determine distance constraints between protein subunits.

膜タンパク質の構造動力学を調べるその場で部位特異的蛍光標識を持つ

Two electrode voltage clamp electrophysiology (TEVC) is a powerful tool to investigate the mechanism of ion transport1 for a wide variety of membrane ...

High-Throughput Measurement and Classification of Organic P in Environmental Samples

Many types of organic phosphorus (P) molecules exist in environmental samples1. Traditional P measurements do not detect these organic P compounds since they do not react with colorimetric reagents2,3. Enzymatic hydrolysis (EH) is an emerging method for accurately characterizing organic P forms in environmental samples4,5. This method is only trumped in accuracy by Phosphorus-31 Nuclear Magnetic Resonance Spectroscopy (31P-NMR) -a method that is expensive and requires specialized technical training6. We have adapted an enzymatic hydrolysis method capable of measuring three classes of phosphorus (monoester P, diester P and inorganic P) to a microplate reader system7. This method provides researchers with a fast, accurate, affordable and user-friendly means to measure P species in soils, sediments, manures and, if concentrated, aquatic samples. This is the only high-throughput method for measuring the forms and enzyme-lability of organic P that can be performed in a standard laboratory. The resulting data provides insight to scientists studying system nutrient content and eutrophication potential.

This protocol describes a high-throughput method of enzymatic hydrolysis that utilizes a microplate reader to measure and classify soil phosphorus as P monoesters, P diesters and inorganic P. Up to 96 samples can be measured at one time in a standard laboratory.

環境試料中の有機Pのハイスループット測定と分類

Many types of organic phosphorus (P) molecules exist in environmental samples1.  Traditional P measurements do not detect these organic P compounds since ...

Quantification of Proteins Using Peptide Immunoaffinity Enrichment Coupled with Mass Spectrometry

There is a great need for quantitative assays in measuring proteins. Traditional sandwich immunoassays, largely considered the gold standard in quantitation, are associated with a high cost, long lead time, and are fraught with drawbacks (e.g. heterophilic antibodies, autoantibody interference, 'hook-effect').1 An alternative technique is affinity enrichment of peptides coupled with quantitative mass spectrometry, commonly referred to as SISCAPA (Stable Isotope Standards and Capture by Anti-Peptide Antibodies).2 In this technique, affinity enrichment of peptides with stable isotope dilution and detection by selected/multiple reaction monitoring mass spectrometry (SRM/MRM-MS) provides quantitative measurement of peptides as surrogates for their respective proteins. SRM/MRM-MS is well established for accurate quantitation of small molecules 3, 4 and more recently has been adapted to measure the concentrations of proteins in plasma and cell lysates.5-7 To achieve quantitation of proteins, these larger molecules are digested to component peptides using an enzyme such as trypsin. One or more selected peptides whose sequence is unique to the target protein in that species (i.e. "proteotypic" peptides) are then enriched from the sample using anti-peptide antibodies and measured as quantitative stoichiometric surrogates for protein concentration in the sample. Hence, coupled to stable isotope dilution (SID) methods (i.e. a spiked-in stable isotope labeled peptide standard), SRM/MRM can be used to measure concentrations of proteotypic peptides as surrogates for quantification of proteins in complex biological matrices. The assays have several advantages compared to traditional immunoassays. The reagents are relatively less expensive to generate, the specificity for the analyte is excellent, the assays can be highly multiplexed, enrichment can be performed from neat plasma (no depletion required), and the technique is amenable to a wide array of proteins or modifications of interest.8-13 In this video we demonstrate the basic protocol as adapted to a magnetic bead platform.

Stable Isotope Standards and Capture by Anti-Peptide Antibodies (SISCAPA) couples affinity enrichment of peptides with stable isotope dilution mass spectrometry (MRM-MS) to provide quantitative measurement of peptides as surrogates for their respective proteins. Here we describe the protocol using magnetic particles in a partially automated format.

質量分析法とあいまってペプチドイムノエンリッチメントを使用したタンパク質の定量化

There is a great need for quantitative assays in measuring proteins. Traditional sandwich immunoassays, largely considered the gold standard in ...

Synthesis of Nine-atom Deltahedral Zintl Ions of Germanium and their Functionalization with Organic Groups

Although the first studies of Zintl ions date between the late 1890's and early 1930's they were not structurally characterized until many years later.1,2 Their redox chemistry is even younger, just about ten years old, but despite this short history these deltahedral clusters ions E9n- (E = Si, Ge, Sn, Pb; n = 2, 3, 4) have already shown interesting and diverse reactivity and have been at the forefront of rapidly developing and exciting new chemistry.3-6 Notable milestones are the oxidative coupling of Ge94- clusters to oligomers and infinite chains,7-19 their metallation,14-16,20-25 capping by transition-metal organometallic fragments,26-34 insertion of a transition-metal atom at the center of the cluster which is sometimes combined with capping and oligomerization,35-47 addition of main-group organometallic fragments as exo-bonded substituents,48-50 and functionalization with various organic residues by reactions with organic halides and alkynes.51-58 
This latter development of attaching organic fragments directly to the clusters has opened up a new field, namely organo-Zintl chemistry, that is potentially fertile for further synthetic explorations, and it is the step-by-step procedure for the synthesis of germanium-divinyl clusters described herein. The initial steps outline the synthesis of an intermetallic precursor of K4Ge9 from which the Ge94- clusters are extracted later in solution. This involves fused-silica glass blowing, arc-welding of niobium containers, and handling of highly air-sensitive materials in a glove box. The air-sensitive K4Ge9 is then dissolved in ethylenediamine in the box and then alkenylated by a reaction with Me3SiC&equiv;CSiMe3. The reaction is followed by electrospray mass spectrometry while the resulting solution is used for obtaining single crystals containing the functionalized clusters [H2C=CH-Ge9-CH=CH2]2-. For this purpose the solution is centrifuged, filtered, and carefully layered with a toluene solution of 18-crown-6. Left undisturbed for a few days, the so-layered solutions produced orange crystalline blocks of [K(18-crown-6)]2[Ge9(HCCH2)2]&bull;en which were characterized by single-crystal X-ray diffraction. 
The process highlights standard reaction techniques, work-up, and analysis towards functionalized deltahedral Zintl clusters. It is hoped that it will help towards further development and understanding of these compounds in the community at large.

We present the high-temperature synthesis of intermetallic precursors K4Ge9, their dissolution in ethylenediamine to form Ge94- deltahedral Zintl ions, and the reaction of the clusters with alkynes to form organo-Zintl ions. The latter are characterized by electrospray mass spectrometry in solutions and by single-crystal X-ray diffraction in the solid state.

ゲルマニウムと有機基との官能の9原子Deltahedral Zintlイオンの合成

Although the first studies of Zintl ions date between the late 1890's and early 1930's they were not structurally characterized until many years later.1,2 ...

Analyzing and Building Nucleic Acid Structures with 3DNA

The 3DNA software package is a popular and versatile bioinformatics tool with capabilities to analyze, construct, and visualize three-dimensional nucleic acid structures. This article presents detailed protocols for a subset of new and popular features available in 3DNA, applicable to both individual structures and ensembles of related structures. Protocol 1 lists the set of instructions needed to download and install the software. This is followed, in Protocol 2, by the analysis of a nucleic acid structure, including the assignment of base pairs and the determination of rigid-body parameters that describe the structure and, in Protocol 3, by a description of the reconstruction of an atomic model of a structure from its rigid-body parameters. The most recent version of 3DNA, version 2.1, has new features for the analysis and manipulation of ensembles of structures, such as those deduced from nuclear magnetic resonance (NMR) measurements and molecular dynamic (MD) simulations; these features are presented in Protocols 4 and 5. In addition to the 3DNA stand-alone software package, the w3DNA web server, located at <a href="http://w3dna.rutgers.edu" target="_blank">http://w3dna.rutgers.edu</a>, provides a user-friendly interface to selected features of the software. Protocol 6 demonstrates a novel feature of the site for building models of long DNA molecules decorated with bound proteins at user-specified locations.

The 3DNA software package is a popular and versatile bioinformatics tool with capabilities to analyze, construct, and visualize three-dimensional nucleic acid structures. This article presents detailed protocols for a subset of new and popular features available in 3DNA, applicable to both individual structures and ensembles of related structures.

3DNAを有する核酸構造の分析と構築

The 3DNA software package is a popular and versatile bioinformatics tool with capabilities to analyze, construct, and visualize three-dimensional nucleic ...

A Chemical Screening Procedure for Glucocorticoid Signaling with a Zebrafish Larva Luciferase Reporter System

Glucocorticoid stress hormones and their artificial derivatives are widely used drugs to treat inflammation, but long-term treatment with glucocorticoids can lead to severe side effects. Test systems are needed to search for novel compounds influencing glucocorticoid signaling in vivo or to determine unwanted effects of compounds on the glucocorticoid signaling pathway. We have established a transgenic zebrafish assay which allows the measurement of glucocorticoid signaling activity in vivo and in real-time, the GRIZLY assay (Glucocorticoid Responsive In vivo Zebrafish Luciferase activitY). The luciferase-based assay detects effects on glucocorticoid signaling with high sensitivity and specificity, including effects by compounds that require metabolization or affect endogenous glucocorticoid production. We present here a detailed protocol for conducting chemical screens with this assay. We describe data acquisition, normalization, and analysis, placing a focus on quality control and data visualization. The assay provides a simple, time-resolved, and quantitative readout. It can be operated as a stand-alone platform, but is also easily integrated into high-throughput screening workflows. It furthermore allows for many applications beyond chemical screening, such as environmental monitoring of endocrine disruptors or stress research.

We describe the procedure and data analysis of a chemical screening system for glucocorticoid stress hormone signaling using zebrafish larvae: the Glucocorticoid Responsive In vivo Zebrafish Luciferase activitY (GRIZLY) assay. The assay sensitively and specifically detects effects on glucocorticoid signaling by compounds that require metabolization or affect endogenous glucocorticoid production.

ゼブラフィッシュ幼虫ルシフェラーゼレポーターシステムを用いたグルココルチコイドシグナル伝達のための化学スクリーニング法

Glucocorticoid stress hormones and their artificial derivatives are widely used drugs to treat inflammation, but long-term treatment with glucocorticoids ...

Sequence-specific Labeling of Nucleic Acids and Proteins with Methyltransferases and Cofactor Analogues

S-Adenosyl-l-methionine (AdoMet or SAM)-dependent methyltransferases (MTase) catalyze the transfer of the activated methyl group from AdoMet to specific positions in DNA, RNA, proteins and small biomolecules. This natural methylation reaction can be expanded to a wide variety of alkylation reactions using synthetic cofactor analogues. Replacement of the reactive sulfonium center of AdoMet with an aziridine ring leads to cofactors which can be coupled with DNA by various DNA MTases. These aziridine cofactors can be equipped with reporter groups at different positions of the adenine moiety and used for Sequence-specific Methyltransferase-Induced Labeling of DNA (SMILing DNA). As a typical example we give a protocol for biotinylation of pBR322 plasmid DNA at the 5&#8217;-ATCGAT-3&#8217; sequence with the DNA MTase M.BseCI and the aziridine cofactor 6BAz in one step. Extension of the activated methyl group with unsaturated alkyl groups results in another class of AdoMet analogues which are used for methyltransferase-directed Transfer of Activated Groups (mTAG). Since the extended side chains are activated by the sulfonium center and the unsaturated bond, these cofactors are called double-activated AdoMet analogues. These analogues not only function as cofactors for DNA MTases, like the aziridine cofactors, but also for RNA, protein and small molecule MTases. They are typically used for enzymatic modification of MTase substrates with unique functional groups which are labeled with reporter groups in a second chemical step. This is exemplified in a protocol for fluorescence labeling of histone H3 protein. A small propargyl group is transferred from the cofactor analogue SeAdoYn to the protein by the histone H3 lysine 4 (H3K4) MTase Set7/9 followed by click labeling of the alkynylated histone H3 with TAMRA azide. MTase-mediated labeling with cofactor analogues is an enabling technology for many exciting applications including identification and functional study of MTase substrates as well as DNA genotyping and methylation detection.

DNA and proteins are sequence-specifically labeled with affinity or fluorescent reporter groups using DNA or protein methyltransferases and synthetic cofactor analogues. Depending on the cofactor specificity of the enzymes, aziridine or double activated cofactor analogues are employed for one- or two-step labeling.

メチルトランスフェラーゼと補因子類似体核酸およびタンパク質の配列特異的標識化

S-Adenosyl-l-methionine (AdoMet or SAM)-dependent methyltransferases (MTase) catalyze the transfer of the activated methyl group from AdoMet to specific ...