Evaluating Salidroside as a Therapeutic Agent for Vascular Calcification Using Network Pharmacology and Experimental Rat Models

Summary

This study establishes a rat model of vascular calcification induced by a high-fat diet (HFD) combined with vitamin D3 (VD3). The model was used to evaluate the therapeutic efficacy of salidroside in preventing and treating vascular calcification, providing insights into its potential mechanisms of action through network pharmacology and in vivo experiments.

Abstract

Vascular calcification (VC) is a critical pathological condition associated with significant morbidity and mortality. This study employs a hybrid approach of network pharmacology and molecular biology to delineate the therapeutic mechanisms of salidroside (SAL), an active compound from Rhodiola crenulata, against VC. Through database mining and network analysis, 388 SAL targets intersecting with 2871 VC-associated targets were identified, resulting in 208 common targets. A protein-protein interaction (PPI) network constructed via the String database and topological analysis in Cytoscape 3.9.1 pinpointed 10 key targets, including IL6, TNF, TP53, IL1B, HIF1A, CASP3, and STAT3, among others. The identified genes were concentrated in the lipid and atherosclerosis pathways, indicating that the improvement of VC by SAL may occur through the regulation of abnormal expression of lipid and inflammatory factors. It was also found that SAL inhibits the abnormal expression of inflammatory factors, thereby activating the JAK2/STAT3 pathway to intervene in the progression of VC. The JAK2/STAT3 pathway is a key molecular mechanism by which SAL prevents further deterioration of VC. Functional enrichment analyses revealed the involvement of these targets in inflammatory responses and lipid metabolism, pivotal pathways in VC. In vivo studies in rats demonstrated SAL's efficacy in mitigating dyslipidemia and vascular inflammation, with improved serum lipid profiles and reduced vascular calcium deposition. The mechanistic exploration, grounded in Western blot analysis, demonstrated salidroside's ability to regulate the JAK2/STAT3 signaling pathway, highlighting its potential as a modulator in this critical molecular mechanism and offering a potential therapeutic target for VC. The strength of this research lies in its methodological rigor, integrating computational predictions with in vivo validations. This comprehensive approach establishes a robust framework for exploring the therapeutic mechanisms of natural compounds in combating VC.

Introduction

Vascular calcification (VC) refers to the abnormal deposition of calcium within the vessel walls, which leads to arterial stiffening and decreased elasticity, ultimately impairing vascular function. Traditionally, VC has been divided into two types: intimal calcification, linked to lipid buildup, and medial calcification. The former is closely associated with inflammatory infiltration, triggering an osteogenic transformation in the vascular wall, characterized by the migration, proliferation, and differentiation of vascular smooth muscle cells (VSMCs) into osteoblast-like cells¹.

The ability of VSMCs to undergo osteogenic differentiation, influenced by factors such as aging, genetics, and environmental conditions like diabetes and chronic kidney disease, is a major contributor to age-related VC. This osteoblast-like transformation exacerbates arterial calcification and degeneration¹.

VC is a multifaceted condition, driven by degenerative changes, metabolic imbalances, and various systemic conditions. Approximately 80% of vascular injuries and 90% of coronary artery disease cases exhibit VC, significantly increasing the risk of severe cardiovascular events^1,2. Therefore, there is a pressing need to discover pharmacological treatments that effectively mitigate or reverse this condition.

Currently, treatment strategies for VC involve various pharmacological interventions, though no drugs are specifically designed for this purpose. For patients with mild calcification, statins are often prescribed to stabilize plaques. However, while they may reduce coronary artery stenosis by lowering lipid levels, their effect on calcification is limited².

Given the complexities of atherosclerosis, many patients exhibit enhanced platelet activation, necessitating the use of antiplatelet drugs like aspirin or clopidogrel to inhibit platelet aggregation and reduce the risk of thrombosis. However, aspirin therapy is only beneficial for individuals with a high coronary artery calcium score and a low risk of bleeding³.

Additionally, research into supplements, such as vitamin K, suggests potential in preventing VC progression⁴. In severe cases, invasive interventions may be considered, although they are often unsuitable for widespread VC⁵. For individuals without existing VC, managing risk factors, such as blood pressure, lipid profiles, and lifestyle choices, remains critical⁶.

Rhodiola crenulata, a perennial herb of the Crassulaceae family, has been traditionally utilized in Chinese medicine. Its principal bioactive constituent, salidroside, commands significant attention due to its notable biological activities. Salidroside is renowned for its ability to inhibit apoptosis, exhibit robust antioxidant properties, and possess anti-inflammatory characteristics^7,8. These attributes contribute to its potential to enhance vascular function, delay vascular aging, and safeguard the vascular endothelium. As a potential therapeutic agent for VC, salidroside holds substantial value for research. However, the precise mechanisms by which salidroside ameliorates VC remain to be fully elucidated and warrant further investigation to harness its therapeutic potential in the treatment of VC.

To explore these mechanisms, this study leverages network pharmacology, an innovative methodology that combines pharmacology, bioinformatics, and computer science to analyze biological systems and elucidate drug mechanisms. Compared to traditional single-target drug research, network pharmacology offers a more comprehensive approach by analyzing a drug's effects on multiple biological targets and signaling pathways. As a key tool in modern drug development, it constructs networks of drugs, targets, and pathways to reveal the underlying mechanisms of drug action^9,10. Despite its extensive use in exploring therapeutic mechanisms, there has been limited research into the interactive mechanisms between salidroside and VC from the perspectives of bioinformatics and network pharmacology.

This research constructs a molecular network map of salidroside's potential impact on VC by identifying and analyzing key targets through extensive database mining. A protein-protein interaction (PPI) network is generated, and topological analysis is applied to highlight critical nodes in the calcification process.

To confirm the computational predictions, a rat model of VC is developed by administering a high-fat diet with vitamin D3 (VD3). This model replicates the pathological features of human VC. Vascular injury is assessed through histological techniques, serum lipid profiles and inflammation markers are evaluated to investigate the systemic effects of salidroside, and the expression of SAL anti-VC related proteins is measured using Western blotting to exploring the impact of salidroside on experimentally induced VC, this study aims to contribute valuable insights into the potential of this compound as a therapeutic strategy for combating VC.

Protocol

The protocol was approved by the Experimental Animals Committee of Changchun University of Chinese Medicine (Approval No. 2023091). This study adheres to international guidelines, including the European Community Guidelines and the EEC Directive of 1986, ensuring the ethical treatment of animals throughout the study. Male Wistar rats (8-10 weeks, weight 200-220 g) were used for the study. The details of the reagents and equipment used are listed in the Table of Materials.

1. Network pharmacology prediction of potential salidroside-VC targets

NOTE: Network pharmacology utilizes computational methods and large-scale data analysis to investigate the complex interactions between drug molecules and biological targets such as pathways, genes, and proteins within an organism^11,12. This approach helps to decipher the biological functions and relationships of the studied entities. The methodology encompasses database utilization, processing of chemical information, acquisition of bioactivity data, retrieval of protein data, analysis of gene expression profiles, construction of interaction networks, and enrichment analysis of pathways¹¹. Figure 1 shows the interaction network of core targets between salidroside and vascular calcification.

1. Construction of the "Ingredient" target database
   1. Use "Salidroside" as the keyword for ingredients to search databases¹³ (see Supplementary Table 1), such as HERB, TCMSP, PubChem, SwissTargetPrediction, CTD, PharmMapper, SEA, and STITCH.
   2. Review relevant literature to identify targets associated with salidroside, with the species set to Homo sapiens. After removing duplicates, standardize the target proteins using UniProt (see Supplementary Table 1) and establish a comprehensive Salidroside target database¹⁴.
2. Construction of the "Disease" target database
   1. Use "Vascular calcification" as the keyword to search databases¹⁵ (See Supplementary Table 1), including GeneCards, OMIM, PharmGkb, and DrugBank, with the species set to Homo sapiens. After de-duplication, create a vascular calcification target database.
3. Prediction of potential therapeutic targets
   1. Input the targets for salidroside and vascular calcification (see Supplementary Table 1) to identify common targets. Generate a Venn diagram to visualize the potential therapeutic targets for salidroside in treating vascular calcification.
4. Construction of the "Salidroside-Vascular Calcification" Protein-Protein Interaction (PPI) network
   1. Compile the potential targets into a Multiple Proteins List and analyze them using STRING (see Supplementary Table 1), with the organism set to Homo sapiens and the interaction score set to medium confidence (>0.4)¹⁶. Extract the PPI data in TSV format for further analysis.
      NOTE: Given that 85% of rat genes are homologous to human genes, performing similar biological functions, rats were selected as experimental subjects for validating the effects of salidroside on vascular calcification¹⁷.
5. Selection and network construction of key targets
   1. Import the PPI network data into Cytoscape 3.9.1 (see Supplementary Table 1) for analysis using the CytoNCA plugin to assess parameters such as Betweenness (BC), Closeness (CC), Degree (DC), Eigenvector (EC), Local Average Connectivity (LAC), and Network Centrality (NC). Select key targets with CC=1 to construct a core target action spectrum map for 'SAL-VC'.
   2. Use the CytoHubba plugin to identify the top 10 hub genes based on Maximal Clique Centrality (MCC), Maximum Neighborhood Component (MNC), and Degree calculations, generating a Hub-genes spectrum map.
6. GO and KEGG pathway enrichment analysis
   1. Perform gene ID conversion using DAVID (see Supplementary Table 1), selecting ENSEMBL_GENE_ID for the gene type-9606 for species information. Analyze the converted gene list using Omicshare (see Supplementary Table 1) for GO functional and KEGG pathway enrichment, with significance set at P value < 0.05¹⁸.
      NOTE: GO functional analysis includes molecular function (MF), biological process (BP), and cellular component (CC). KEGG pathway analysis involves pathway enrichment and pathway classification enrichment¹⁹. The enrichment analysis results are depicted in Figure 2.

2. Animal experiment

1. Acclimatization
   1. Acclimate Wistar rats under specific pathogen-free (SPF) conditions with a 12-h light/dark cycle. Ensure they have ad libitum access to food and water to maintain their health prior to the commencement of experiments. Perform adaptive feeding for 1 week.
2. Model establishment
   1. Acclimate the rats to the environmental conditions and randomly assign them into five groups: Control group (Ctrl, ND + Vehicle), Model group (Model, HFD + Vehicle), SAL low-dose group (SAL-L, HFD + SAL 5mg/kg), SAL high-dose group (SAL-H, HFD + SAL 10mg/kg), and Simvastatin (SIM) group (HFD + SIM 5mg/kg).
   2. Administer a normal diet (ND) to the Ctrl group and a high-fat diet (HFD) to the remaining groups for the entire duration of the experiment. On the first day of HFD administration, inject a single subcutaneous dose of 600,000 IU/kg VD3 to all groups except the Ctrl group^20,21. Follow with weekly subcutaneous injections of 100,000 IU/kg VD3 for the following 8 weeks (Figure 3).
   3. Monitor the health status and survival of the animals daily. Begin experimental interventions in the ninth week.
   4. Euthanize the animals at the conclusion of the study (following the institutionally approved protocols). Collect serum samples, allow them to stand for 30 min, and centrifuge to isolate the serum (following previously published reports^20,21). Dissect vascular tissues (abdominal aorta), and rinse with phosphate-buffered saline (PBS) to remove blood.
   5. Fix one portion of the tissue in 4% paraformaldehyde for histological examination and store another portion in liquid nitrogen for molecular analysis.
      NOTE: Dilute salidroside with warm water before use.

3. Evaluation of vascular tissue injury using HE, VK, EVG staining

NOTE: Fix vascular tissue (abdominal aorta) in 4% paraformaldehyde, dehydrated in ethanol after 48 h, and embedded in paraffin. Cut the embedded paraffin blocks into 5 µm slices for Hematoxylin-Eosin (HE), Elastica van Gieson (EVG), and Von Kossa (VK) staining, and observe the histological morphology under a light microscope. HE staining is used to assess changes in tissue morphology. In vascular tissue, it highlights structural alterations in the vessel wall, including smooth muscle cell proliferation, disorganized cell arrangement, and inflammation. EVG staining visualizes elastic and collagen fibers, which is essential for evaluating elastic fiber damage or remodeling in vascular tissue and helps in understanding the impact of calcification on vascular elasticity. VK staining detects calcium deposits, a key feature in VC, making it crucial for assessing the extent and distribution of calcification in vascular tissue^22,23.

1. HE staining for vascular tissue damage detection
   1. Deparaffinization and rehydration
      1. Deparaffinize sections in two changes of xylene for 8 min each and rehydrate through a graded ethanol series (100%, 95%, 85%, 75%) for 3 min per step. Follow with a 2-min rinse in running tap water.
   2. Hematoxylin staining
      1. Stain the sections with hematoxylin for 5-10 min and wash to remove excess stain, followed by a rinse with running tap water.
         ​NOTE: A light stain of 5 min is recommended to avoid overly dark staining, which can affect cytoplasmic color.
   3. Differentiation
      1. Differentiate the sections in a differentiation solution for 30 s, followed by two rinses in tap water for 3 min each.
   4. Eosin counterstaining
      1. Place the sections in eosin stain for 1 min. After removing the excess stain, perform rapid dehydration.
   5. Dehydration, clarification, and mounting
      1. For rapid dehydration, dip the sections in 75%, 85%, 95%, and 100% ethanol for 3 s each, followed by 100% ethanol  for 1 min.
         NOTE: Rapid dehydration is recommended as eosin may lose color in water and ethanol gradients.
2. VK staining for calcium detection
   1. Deparaffinization and rehydration
      1. Perform this step following step 3.1.1.
   2. Silver nitrate reaction
      1. Blot the sections dry, outline with a fine brush, and stain with Von Kossa (see Table of Materials). Expose them to ultraviolet light for 4 h, then thoroughly rinse with running tap water.
   3. Counterstaining with hematoxylin
      1. Stain the sections with hematoxylin for 5 min, rinse in running tap water, differentiate, and rinse again, followed by a running tap water rinse.
   4. Eosin counterstaining
      1. Dehydrate the sections through graded ethanol (85% and 95% for 5 min each), then stain with eosin for 5 min.
   5. Dehydration and mounting
      1. Dehydrate the sections in ethanol baths (100% Ethanol I, II, III for 5 min each) and clarify in xylene baths (Xylene I and II for 5 min each). Then, mount the sections with neutral balsam.
   6. Microscopic examination and image capture
      1. Examine the stained sections under a light microscope and capture images for analysis.
         NOTE: Ensure that calcium deposits appear brown-black to dark black, nuclei are blue, and the background is red. Prepare the silver nitrate solution for fresh VK staining immediately before use.
3. EVG staining for elastic and collagen fibers
   1. Deparaffinization and rehydration
      1. Treat the paraffin sections with heat for 50 min, then immerse them in xylene for 20 min to remove paraffin. Proceed by subjecting the sections to a graded ethanol series (100%, 95%, 85%, 75%) for 5 min each, concluding with a rinse in running tap water for 5 min.
   2. EVG staining
      1. Apply the EVG staining solution (see Table of Materials) for 10 min, then rinse briefly in running tap water for 5 s to remove excess stain.
      2. Next, apply Verhoeff working solution (see Table of Materials) for 5 min, followed by another brief rinse in running tap water for 5 s. Apply Verhoeff's differentiating solution for 5 s until the elastin fibers are clearly visible, and then rinse with running tap water for 5 s.
         NOTE: Mix components A, B, and C (provided in the commercially available kit) in a 5:2:2 ratio to prepare the Verhoeff working solution before use. Use the solution within 2 h and replenish as needed during the staining process to prevent the sections from drying out.
   3. Dehydration and mounting
      1. Dehydrate the sections through a graded ethanol series (75%, 85%, 95%, and 100%) for 5 s each, followed by a clarification in two changes of xylene for 1 min each. After a brief air-drying period, mount the sections with neutral balsam.
   4. Microscopic examination and image analysis
      1. Examine the stained sections under a light microscope to visualize elastic and collagen fibers, and capture images for subsequent analysis.

4. Alkaline Phosphatase (ALP) assay

NOTE: Use ALP as a key indicator to evaluate the effectiveness of anti-calcification treatments.

1. Reagent preparation
   1. Dissolve the color-developing substrate in ice-cold 0.05 M pH 9.6 carbonate buffer to a final volume of 2.5 mL.
      NOTE: Prepare the buffer by dissolving 1.59 g of sodium carbonate and 2.93 g of sodium bicarbonate in 1,000 mL of double-distilled water.
2. Substrate dilution
   1. Dilute 10 µL of p-nitrophenol solution (10 mM) with 0.05 M pH 9.6 carbonate buffer to a final volume of 0.2 mL to achieve a final concentration of 0.5 mM.
3. Sample preparation
   1. Homogenize the abdominal aorta in lysis buffer. Centrifuge the homogenate (~12,000 x g for 10 min at 4 °C) and collect the supernatant for ALP activity detection.
      NOTE: Ensure the lysis buffer is free of phosphatase inhibitors. Store pending test samples at -80 °C, avoiding repeated freeze-thaw cycles.
4. Microplate preparation for assay
   1. Prepare a 96-well plate with blank, standard, and sample wells. Add 50 µL of the standard solution to standard wells and 50 µL of pending test samples to sample wells. Incubate the plate at 37 °C for 10 min.
5. Reaction termination and absorbance measurement
   1. Add 100 µL of stop solution to each well to terminate the reaction. Measure the absorbance at 405 nm and calculate ALP activity based on absorbance values (following the manufacturer's instructions, see Table of Materials).
      NOTE: Wells containing the standard or samples with ALP activity will show varying shades of yellow. The color is stable for up to 2 h.

5. Calcium content determination

NOTE: Calcium content determination is critical for assessing the extent of mineralization in biological tissues.

1. Tissue preparation
   1. Mince the tissue into small pieces and homogenize in lysis buffer.
2. Sample dilution and centrifugation
   1. Dilute the tissue in lysis buffer at a ratio of 1:10. Homogenize the mixture and centrifuge at 4 °C, 12,000 x g for 5 min. Collect the supernatant for analysis.
      NOTE: Prepare calcium standard dilutions (0-1.0 mM) using a 5 mM calcium standard solution (see Table of Materials).
3. Plate setup and incubation
   1. Add 50 µL of standard or test samples to each well of a 96-well plate. Add 150 µL of assay working solution, mix thoroughly, and incubate the plate in the dark at room temperature for 10 min. Measure the absorbance at 575 nm and construct a standard curve.
4. Calculation of calcium content
   1. Calculate the calcium content using the standard curve, incorporating the dilution factor, sample volume, and the atomic weight of calcium.

6. Enzyme-Linked Immunosorbent Assay (ELISA) for inflammatory cytokines (IL-6, TNF-α, IL-1β)

NOTE: IL-6, IL-1β, and TNF-α are key pro-inflammatory cytokines that indicate the presence and severity of an inflammatory response. Measuring these cytokines is essential for understanding the inflammatory process and evaluating the effectiveness of anti-inflammatory treatments.

1. Sample collection
   1. Collect serum from the rat's abdominal aorta. Allow it to coagulate at room temperature for 2 h. Centrifuge the sample at 3,000 x g for 10 min at 4 °C and collect the supernatant.
2. Microplate preparation for the assay
   1. Prepare a 96-well plate with wells designated for standards and test samples. Add 50 µL of standards (see Table of Materials) at varying concentrations to the appropriate wells.
3. Sample preparation
   1. Add 40 µL of sample diluent to each well designated for test samples. Add 10 µL of the sample to the same wells, resulting in a 5-fold dilution.
4. Incubation with enzyme-labeled reagents
   1. Add 100 µL of enzyme-labeled reagents specific to IL-6, TNF-α, or IL-1β to all wells except the blank. Incubate the plate at 37 °C for 60 min.
5. Washing
   1. Discard the liquid from all wells except the blank. Wash the wells with 1x wash solution (prepared as a 20-fold dilution in distilled water). Repeat this washing step five times and dry the wells.
6. Color development and termination
   1. Add 50 µL of substrate solutions A and B (from the commercially available kit, see Table of Materials) to each well. Mix gently and incubate the plate at 37 °C in the dark for 15 min. Add 50 µL of stop solution to each well to terminate the reaction.
7. Absorbance measurement and data analysis
   1. Set the blank well as zero. Measure the absorbance at 450 nm using a microplate reader. Generate a standard curve based on the OD values and standard concentrations. Calculate the sample concentrations using interpolation and adjust for the dilution factor.

7. Lipid profile assay

NOTE: The Lipid profile assay detects abnormal lipid levels, where elevated or imbalanced lipid levels can accelerate the risk of vascular calcification.

1. Total cholesterol and triglycerides (TC and TG)
   1. Collect serum and prepare a 96-well plate with designated wells for blank, calibration, and pending test samples. Add 2.5 µL of serum, calibration standard, or blank solution to each well.
   2. Add 250 µL of the working solution to each well. Mix gently and incubate the plate at 37 °C for 10 min. Measure the absorbance at 500 nm using a microplate reader.
2. Low-density lipoprotein and high-density lipoprotein (LDL-C and HDL-C)
   1. Collect serum and prepare a 96-well plate with wells designated for blank, calibration, and pending test samples. Add 2.5 µL of serum, calibration standard, or blank solution to the respective wells.
   2. Add the appropriate reagent (Reagent One for 180 μL or Reagent Two for 60 μL, see Table of Materials) to each well as specified in the assay kit instructions. Incubate at the temperature (37 °C) and for the time (Reagent One for 5 min or Reagent Two for 10 min) recommended for each reagent.
   3. Measure the absorbance at the specific wavelength (600 nm) indicated for LDL-C or HDL-C using a microplate reader.

8. Western blotting

NOTE: Western blot (WB) is instrumental in assessing the expression levels of key proteins, allowing for the detection of both total and phosphorylated forms.

1. Tissue preparation
   1. Weigh 0.05 g of tissue and rinse thoroughly with PBS to remove excess debris. Add 500 µL of lysis buffer containing 1x phosphatase and protease inhibitors. Incubate the tissue at 4 °C for 10 min and homogenize it using a tissue grinder.
2. Protein extraction
   1. Allow the homogenized sample to stand for 1 min, then centrifuge at 4 °C and 12,000 x g for 15 min. Collect the supernatant for protein analysis. Determine the protein concentration using the BCA method following the manufacturer's instructions (see Table of Materials). Use a standard curve to calculate the concentration.
      NOTE: Pre-cool the centrifuge to 4 °C before use. Measure protein concentration at 562 nm.
3. Sample preparation
   1. Mix the protein sample with 5x loading buffer containing β-mercaptoethanol and SDS in a 4:1 ratio. Heat the mixture at 100 °C for 5 min to denature the proteins.
      ​NOTE: If 1x loading buffer is required, dilute the 5x buffer with lysis buffer.
4. SDS-PAGE gel preparation
   1. Prepare a 12% SDS-PAGE gel and place it in the electrophoresis apparatus. Add 1x electrophoresis buffer up to the halfway mark as per the instructions (see Supplementary Table 2).
5. Electrophoresis
   1. Retrieve the protein samples from -20 °C. Load 60 µg of protein per well and run the gel.
   2. Set the current to 50 mA for 20 min for the stacking gel, then increase to 100 mA for 60 min for the separating gel until the dye front reaches the bottom.
6. Membrane transfer
   1. Activate the PVDF membrane in methanol for 5 min.
   2. Assemble the transfer sandwich in the following order: filter paper → SDS-PAGE gel → PVDF membrane → filter paper. Transfer proteins at 300 mA for 60 min.
      ​NOTE: Ensure no air bubbles are trapped between the SDS-PAGE gel and PVDF membrane.
7. Blocking
   1. Incubate the PVDF membrane in 5% BSA (prepared in 1x TBST) at room temperature with gentle shaking for 60 min. Wash the membrane with 1x TBST three times for 5 min each.
8. Primary antibody incubation
   1. Incubate the membrane in 5 mL of the appropriate primary antibody (e.g., p-JAK2, JAK2, p-STAT3, STAT3, p-NF-κB p65, NF-κB p65, IκBα) diluted in blocking buffer at room temperature for 2.5 h.
9. Secondary antibody incubation
   1. Wash the membrane with 1x TBST three times for 5 min each after primary antibody incubation. Incubate with the appropriate secondary antibody at room temperature for 1 h. Wash the membrane again with 1x TBST three times for 5 min each.
10. Detection
    1. Visualize protein bands using ECL chemiluminescence detection²⁴ (see Table of Materials).
11. Densitometry analysis
    1. Quantify protein bands using ImageJ software. Follow this workflow in ImageJ: Image → 8-bit → Process → Subtract Background. Analyze → Set Measurements → Analyze → Set Scale. Edit → Invert → Analyze → Measure → Results. File → Save As → IntDen.
    2. Generate statistical graphs using graphing and statistical analysis software.
       NOTE: Ensure results are consistent across replicates to validate findings.

9. Statistical analysis

1. Collect and organize data using GraphPad Prism 9.0.
2. Calculate and plot error bars using mean ± SD from raw data.
3. Perform statistical analysis using one-way ANOVA, followed by Tukey's post-hoc test for multiple comparisons.
4. Determine the statistical significance at P < 0.05, with smaller P-values indicating greater differences in the results.

Results

Network pharmacology analysis

Using databases such as HERB, TCMSP, Pubmed, SwissTargetPrediction, CTD, PharmMapper, SEA, and STITCH, 388 potential target genes for salidroside were identified. Additionally, 2871 potential target genes related to VC were retrieved from databases like GeneCards, OMIM, PharmGkb, and DrugBank. Intersection analysis via VENN diagrams revealed 208 overlapping targets, considered key targets for salidroside's intervention in VC (

Discussion

VC is characterized by degenerative changes in vascular cells and tissues, with pathological mineral deposits within blood vessels leading to stiffening of the vessel walls or the formation of atherosclerotic plaques, which can result in obstructive vascular diseases²⁵. Studies show that about 85% of VC plaques may evolve into thrombosis, which can trigger acute cardiovascular episodes. Additionally, VC is a crucial indicator of potential acute cardiovascular events, strokes, and peripheral vascul...

Materials

Name	Company	Catalog Number	Comments
30% (29:1) Acrylamide/Bis Solution	Beijing Solarbio Science & Technology Co., Ltd ,China	A1010
4% Paraformaldehyde Fix Solution	Beyotime Biotech Inc (Beyotime) , China	P0099
5*loading buffer	Beijing Solarbio Science & Technology Co., Ltd ,China	P1040
Alkaline Phosphatase Assay Kit	Beyotime Biotech Inc (Beyotime) , China	P0321S
AlphaView Software	Proteinsimple Inc.USA	AlphaView SA
BCA Protein Assay Kit	Beyotime Biotech Inc (Beyotime) , China	P0012
Bluing Solution	Beijing Solarbio Science & Technology Co., Ltd ,China	G1866
Calcium Colorimetric Assay Kit	Beyotime Biotech Inc (Beyotime) , China	S1063S
Collagen Fiber And Elastic Fiber Staining Kit(EVG-Verh eff Method)	Beijing Solarbio Science & Technology Co., Ltd ,China	G1597
Dewatering machine	Diapath Biosciences  Ltd, Italy	Donatello
Embedding machine	Wuhan Junjie Electronics Co., Ltd,China	JB-P5
Enzyme-labeled instrument	Biotek Co., Ltd,USA	Epoch
Ethanol absolute	GHTECH  Co., Ltd, China	64-17-5
Goat Anti-Mouse IgG (H+L) HRP	Bioworld technology, co, Ltd.,China	BS20242-Y
GraphPad Prism Software	GraphPad Software.,USA	GraphPad Prism 9.0
Hematoxylin-Eosin Stain Kit	Beijing Solarbio Science & Technology Co., Ltd ,China	G1120
High-density lipoprotein cholesterol assay kit	Nanjing Jiancheng Bioengineering Research Institute Co., Ltd,China	A112
HRP-labeled Goat Anti-Rabbit IgG(H+L)	Guangzhou saiguo biotech Co.,LTD	A0208
Image J Software	National Institutes of Health(NIH),USA	Image J
IκB Alpha Polyclonal antibody	Proteintech Group, Inc.A,USA	10268-1-AP
JAK2 Antibody	Affinity Biosciences Co., Ltd,China	AF6022
Low-density lipoprotein cholesterol assay kit	Nanjing Jiancheng Bioengineering Research Institute Co., Ltd,China	A113
NF-κB p65 Antibody	Proteintech Group, Inc.A,USA	10745-1-AP
Pathological microtome	Leica Biosystems,USA	RM2016
Phosphatase Inhibitor Cocktail Tables	F. Hoffmann-La Roche, Ltd,Switzerland	04906845001
Phospho-JAK2 (Tyr931) Antibody	Affinity Biosciences Co., Ltd,China	AF3024
Phospho-NF-κB p65(Ser276) Antibody	Affinity Biosciences Co., Ltd,China	AF2006
Phospho-STAT3(S727) Antibody	Abways  Science & Technology Co., Ltd ,China	CY5291
Protease Inhibitor Cocktail	F. Hoffmann-La Roche, Ltd,Switzerland	11873580001
PVDF membrane	F. Hoffmann-La Roche, Ltd,Switzerland	3010040001
Rat IL-1β ELISA Kit	Beyotime Biotech Inc (Beyotime) , China	PI303
Rat IL-6 ELISA Kit	Beyotime Biotech Inc (Beyotime) , China	PI328
Rat TNF-α ELISA Kit	Beyotime Biotech Inc (Beyotime) , China	PT516
RIPA Lysis Buffer	Beyotime Biotech Inc (Beyotime) , China	P0013B
Salisoroside	Shanghai yuanye Bio-Technology Co., Ltd,China	S25475
SDS	Guangzhou saiguo biotech Co.,LTD,China	3250KG001
Sodium carbonate	China National Pharmaceutical Group Co., Ltd. , China	1001921933
Sodium hydrogen carbonate	China National Pharmaceutical Group Co., Ltd. , China	10018960
Sodium thiosulfate	China National Pharmaceutical Group Co., Ltd. , China	20042518
STAT3 Antibody	Proteintech Group, Inc.A,USA	10253-2-AP
TBST (10×)	Beyotime Biotech Inc (Beyotime) , China	ST673
Total cholesterol assay kit	Nanjing Jiancheng Bioengineering Research Institute Co., Ltd,China	A111
Triglyceride assay kit	Nanjing Jiancheng Bioengineering Research Institute Co., Ltd,China	A110
Tris Base	Guangzhou saiguo biotech Co.,LTD	1115GR500
Upright optical microscope	Nikon Corporation,Japan	Eclipse E100
Von Kossa Solution	Wuhan servicebio technology CO.,LTD,China	G1043
Western Blotting Luminol Reagent	Santa Cruz Biotechnology, Inc. ,USA	SC-2048
β-Actin antibody	Cell Signaling Technology, Inc.,USA	E4967