단백질 결정의 미세 결정학 및

The overall goal of this protocol is to introduce X-ray crystallography methodologies applied to microcrystals and particularly to those produced in cells which are considered in vivo crystals. The main advantage of this approach is that it provides a simple and efficient process to produce, detect, and analyze microcrystals. This method aims at facilitating the use of microcrystals by using crystals grown inside living cells which removes the need for complex purification process and Aprocox sedation trials.

In this video we will be focusing on simple preparation and manipulation for X-ray deflection experiments at a synchrotron beamline. We show the steps that differ the most from classical crystallography. In this demonstration we will be using crystals from the vital polyhedron protein grown in success but the method can also be applied to proteins forming crystals in any bacterial, insect, mammalian, or yeast cells.

First, incubate 30 milliliters of Sf9 cells over expressing the cypovirus polyhedron protein for three days at 27 degrees celsius on a rotating platform. Transfer 500 microliters of Sf9 cell culture into a micro centrifuge tube using a sterile serological pipette, taking care to ensure that the sterility of the main culture is maintained by using a class II bio safety cabinet and following standard aseptic techniques. Pipette five microliters of cells from the micro centrifuge tube onto a glass slide.

Then, gently angle a glass cover slip over the sample with one edge touching the drop and carefully lower the coverslip onto the liquid, avoiding the formation of air bubbles. Next, image the slide with an inverted microscope. Carefully examine the cells, starting at 200x magnification and zooming in at maximal magnification when detecting a potential crystal.

Look for sharp edges and changes in refractivity. If crystals are identified, examine the culture daily to monitor crystal growth by repeating the previous steps. For Sf9 cells, harvest by transferring the culture to a centrifuge tube.

Place the tube on ice and proceed to the next step as soon as possible. For isolation of crystal-containing cells, pipette four milliliters of infected Sf9 cells in a tube adapted to flow cytometry analysis. Prepare a second tube with an equivalent number of Sf9 cells from a mock infected culture as a control.

Next, add propidium iodide to both samples to a final concentration of one microgram per milliliter, just prior to flow cytometric evaluation. Now, apply control sample cells to a standard flow cytometer capable of cell sorting according to FSC and SSC. Analyze at least 20, 000 events.

After discarding dead cells, cell clumps, and debris from the analysis, generate the FSC to SSC plot. Following this, analyze at least 20, 000 events of the crystal-containing sample. Compare the FSC to SSC plot with the control and look for the appearance of a distinct population corresponding to crystal-containing cells.

Define the gates around the crystal-containing cell population, usually appearing at higher SSC or FSC. Using this gating, sort about 150, 000 to 200, 000 of the crystal-containing cells into a 1.5 milliliter micro centrifuge tube prefilled with 50 microliters of PBS buffer. Image the sorted samples by light microscopy as previously described to confirm which population is associated with crystal-containing cells.

At this stage cells can be incubating with heavy-atom solutions if experimental phasing is required. This approach follows screening of various compounds and incubation times as described in the text and in other reviews. Set up the tools for mounting the sample by first attaching a micro mesh mounted on a pin to the end of a magnetic wand.

Place the wand sideways into the cleft of a dialysis float buoy. Then, pick up a paper wick with a pair of tweezers and lock them. Double check that the set up is complete before proceeding.

Now, mix the cells with an equal volume of 0.4%trypan blue solution to a final concentration of 0.2%After resuspending the cells, pipette 0.5 microliters of the sorted cells onto the micro mesh. After allowing the cells to deposit on the micro mesh surface, remove most of the excess liquid by blotting with a paper wick. If the micro mesh is not sufficiently blotted, the cells will be at different depths within the excess liquid, which will complicate their alignment to the X-ray beam at the synchrotron.

In addition, the excess liquid will increase the background X-ray scattering. If the micro mesh is blotted in excess, the liquid will be completely removed and the sample will not be held in the grid openings. With optimal blotting, only a thin layer of liquid remains on the micro mesh, protecting the sample and forcing it into the grid openings.

Some crystals will require the use of a cryoprotectant. This is not required in our case, but the procedure would be the same as for applying the sample and then blotting. Ensure that only a thin layer of liquid is remaining.

Immediately flash-cool the micro mesh in liquid nitrogen and transfer it to a robot puck for transport to a synchrotron microfocus beamline. Due to the small size of in vivo crystals, collect afraction data on a microfocus crystallography beamline. First, mount the micro mesh on the goniometer.

Now, start by centering the micro mesh with the beam path using the face-on and side-on orientations. With the micro mesh face-on, fine tune the alignment by aligning the center of one of the horizontal lanes of the micro mesh. Collect data along this horizontal lane with only minor readjustments to the alignment.

Once all the crystals of the lane have been tested, proceed to the next lane and repeat the alignment procedure. Make sure that the lanes that have been processed are clearly identified so that crystals are not missed or shot twice using the trypan blue color change as a guide. An overview of two methods for structure determination using in vivo microcrystals is presented.

The top row describes the classical approach involving purification of crystals from cells while the bottom row shows the in cellulo crystallography approach that keeps the crystals in the host cells for data collection. For the in cellulo approach, the flow cytometry profile of non-infected cells is compared with a profile of crystal-containing cells and used to determine which cell population should be selected to sort crystal-containing cells away from the other cells. In this example, cells containing polyhedra have a higher side scattering than non-infected cells.

Cells stained with trypan blue can be easily visualized using cameras available at most synchrotron beamlines. While purified crystals are laborious to identify and align with the X-ray beam due to their small size, when collecting data it is best to proceed in a grid pattern in order to minimize centering procedures and avoid exposing the same cell or crystal twice or missing cells and crystals. Once mastered, this flow through takes about half a day from harvest of the crystal-containing cells to data collection.

This procedure is compatible with heavy-atom soaks for experimental phasing. In the case of the polyhedron, the normal structure was obtained in eight days from the start of the protein expression. Don't forget that working with liquid nitrogen can be extremely hazardous and that precautions against suffocation and burns must be taken.