Quantitative Multispectral Analysis Following Fluorescent Tissue Transplant for Visualization of Cell Origins, Types, and Interactions

Podsumowanie

Complex tissue masses, from organs to tumors, are composed of various cellular elements. We elucidated the contribution of cellular phenotypes within a tissue utilizing multi-labeled fluorescent transgenic mice in combination with multiparameter immunofluorescent staining followed by spectral unmixing to decipher cell origin as well as cell characteristics based on protein expression.

Streszczenie

With the desire to understand the contributions of multiple cellular elements to the development of a complex tissue; such as the numerous cell types that participate in regenerating tissue, tumor formation, or vasculogenesis, we devised a multi-colored cellular transplant model of tumor development in which cell populations originate from different fluorescently colored reporter gene mice and are transplanted, engrafted or injected in and around a developing tumor. These colored cells are then recruited and incorporated into the tumor stroma. In order to quantitatively assess bone marrow derived tumor stromal cells, we transplanted GFP expressing transgenic whole bone marrow into lethally irradiated RFP expressing mice as approved by IACUC. 0ovarian tumors that were orthotopically injected into the transplanted mice were excised 6-8 weeks post engraftment and analyzed for bone marrow marker of origin (GFP) as well as antibody markers to detect tumor associated stroma using multispectral imaging techniques. We then adapted a methodology we call MIMicc- Multispectral Interrogation of Multiplexed cellular compositions, using multispectral unmixing of fluoroprobes to quantitatively assess which labeled cell came from which starting populations (based on original reporter gene labels), and as our ability to unmix 4, 5, 6 or more spectra per slide increases, we've added additional immunohistochemistry associated with cell lineages or differentiation to increase precision. Utilizing software to detect co-localized multiplexed-fluorescent signals, tumor stromal populations can be traced, enumerated and characterized based on marker staining.¹

Wprowadzenie

Understanding tissue development and repair is significant to elucidating participating cellular components in wound healing,^2,3 regenerative medicine, developmental biology and tumor biology. Under circumstances of repair, numerous cell types infiltrate the surrounding microenvironment to aid in vascularization, ECM deposition, proliferation and tissue restructuring. Cellular factors and phenotypes can be identified based on multiparameter, multiplexed markers that can identify the localization, differentiation status and interaction between cellular components within the investigated microenvironment. Herein, we describe tumor development as a prototypical example for this multicolor-multicellular transplant model followed by multispectral imaging and spectral unmixing methodology.

Tumor progression is a multistep process that is marked by several acquired capabilities that include enhanced proliferation, antiapoptotic, invasive and angiogenic properties.⁴ Tumor development is facilitated by non-neoplastic cells that are recruited into the surrounding environment to provide growth factors, structural matrices, vascular networks and immune modulation.^1,5,6 This microhabitat consists of cells derived from local, neighboring tissues such as adipose, and blood vessels and distant sources such as bone marrow derived cells ¹. The extent of non-neoplastic cell incorporation depends on the demand from the tumor, which often corresponds with the stage/grade of the tumor. To comprehend the role of the tumor supportive microenvironment, one must understand the origin and the differentiation potential of the non-neoplastic cell populations.

This protocol has been designed to aid in the interpretation of tumor progression through the visualization of both the bone marrow derived cellular components, and the local tissue derived cells. Utilizing fluorescent reporter gene-expressing transgenic mice, we transplanted GFP (green-fluorescent protein) bone marrow into a lethally irradiated RFP (red-fluorescent protein) mouse. Following successful bone marrow engraftment, a syngeneic tumor cell line is injected orthotopically and allowed to engraft for 4-8 weeks. The resulting tumor is excised from the mouse and processed for immunofluorescent (IF) staining to visualize the stromal components. Multiplexing IF markers is a commonly used technique that involves significant optimization^7-9, however using a multispectral imaging/unmixing platform improves the potential for fluorescent marker combinations that possess spectral overlap. Herein we present a technique we call MIMicc- multispectral interrogation of Multiplexed cellular compositions to stain and analyze up to eight markers within a tumor section on a single slide in order to analyze the cellular origins, cellular differentiation status and cell-cell interactions of components within the tumor microenvironment. This simplified example has the potential to be expanded upon in order to analyze five, six, or more markers utilizing antibodies or intracellular promoter-driven fluorescent expression. Table 1 lists potential fluorescent antibody staining combinations with appropriate species taken into account.

Protokół

Syngeneic Murine Bone Marrow Transplantation (BMT) as approved by institutional IACUC protocols (Note: Success of this protocol requires utilization of any labeled cell type(s) as the target for multispectral analysis, and to facilitate the downstream analysis, one can exploit any genetic or stable cellular labeling. We suggest that any cell, tissue, or organ-to-be can be applied to a transplant model and that the transplant can contain as many unique labeled populations as the research deems useful. Additionally, multi-labeled cellular systems, such as those found in transgenic mice containing multiple lineage restricted-fluorescently labeled populations -can be designed to eliminate transplant complications for the study of certain pathological states.

1. Lethally irradiate BMT recipient mice with a single dose of 9.5 Gy four hours before reconstitution with donor bone marrow. (BMT GFP recipients should be 6-10 weeks of age).
2. Wet the mouse pelt with 70% ethanol before clipping and peeling it back to expose the hind limbs with sterile surgical scissors. Remove the entire leg including the iliac crest at the sacroiliac joint. Discard the foot by cutting just above the ankle and then thoroughly remove all muscle, ligaments and excess tissue from bone. Flush marrow from the tibia, fibia and iliac crest with a 23 G needle using 2% sterile FBS in PBS (PBS-2). (BMT RFP donors should be sacrificed according to institutional standards.)
3. Slice and gently crush the remaining bone into fragments using a scalpel and forceps and then place into 50 ml conical tube with 3 μg/ml collagenase I for 1 hr at 37 °C at 300 rpm.
4. Top off the tube with PBS-2 and collect supernatant into a fresh tube and combine with flushed cells. Spin down at 250rpm for 5 min at 4 °C.
5. Resuspend cells in PBS-2 and filter through 40 nm cell filter. At this point, the cells can be labeled for fluorescent activated cell sorting (FACS) if one wants to manipulate specific populations for the BMT.
6. Resuspend 2 x 10⁶ cells per 100 μl PBS, per mouse. Use 29 G needle to systemically inject into irradiated GFP recipient mice by tail or retro-orbital vein-bevel-side-up. Inject one mouse with 100 μl PBS only as engraftment control. Use a heat lamp to dilate vessels prior to injection and use a tail vein injection restraint upon injection. Have sterile gauze available to apply light pressure to the tail post injection.
7. Three weeks post BMT, collect blood retro-orbitally and analyze by flow cytometry to confirm the presence of GFP circulating cells and the absence of RFP circulating cells. The control mouse will have died at this point.

2. Tumor Engraftment According to Institutional IACUC Guidelines

1. Grow ID8 ovarian murine tumor cells in vitro prior to in vivo injection (1 x 10⁶ cells per mouse). Day of injection, trypsinize cells, wash with PBS and resuspend in PBS at 1 x 10⁶ cells per 100 μl.
2. Inject tumor cells into intaperitoneal cavity of the mouse, needle should be bevel-side-up. Sterilize injection sight with 70% ethanol. Inject into the lower left or lower right quadrant of the abdomen (cranial and slightly medial to the inferior set of abdominal nipples of female mouse), avoid hitting the organs. Restrain mouse by grabbing by the scruff and holding the tail with the pinky or ring finger. Mice can be anesthetized with isoflurane for this procedure.
3. Sacrifice the mice when signs of tumor engraftment, such as slight abdominal bloating, are apparent. This will occur over 4-12 weeks.
4. Excise tumors from IP cavity. Tumors within the cavity will look like white nodules on and around the surface of the organs. With a scalpel, remove the tumors and place in a tube/jar of 10% formalin for 24 hr fixation. Histological preparation can be out-sourced to pathology/histology core if reagents and materials are not readily available for paraffin embedding and slide preparation. Section tissue into 5-8 μm slices on glass slides for subsequent staining procedures.

3. Multi-parameter Immunofluorescent Staining

1. Prepare Single color control slides for every fluorescent probe utilized in the experiment. In this scenario, four colors are used. Therefore, four slides for each individual color as well as one slide for background noise control and finally one slide for the full combination staining. (Total slides = 6) All slides will be processed side by side in an identical fashion to minimize experimental variation.
2. Bake paraffin sections at 56 °C for 1 hr.
3. Wash slides 3x 10 min in xylene.
4. Wash 2x 5 min 100% ethanol.
5. Wash 1x 3 min 95%ethanol
6. Wash 1x 2 min90%ethanol.
7. Wash 1x 2 min70%ethanol.
8. Wash 1x 2 min in water. Slowly immerse the staining rack in and out of the water 10x.
9. During the last wash series, pre-boil sodium citrate buffer for 2 min (microwave on high). (Can replace with tris-EDTA buffer depending on the antibodies in use)
10. Boil the slides for 20 min in sodium citrate buffer (microwave on 10% power or in a pressure cooker). If buffer boils, turn off microwave and let sit.
11. Remove from heat source and let the slides rest for 30 min in the sodium citrate buffer to cool down.
12. Rinse the slides in water for 5 min.
13. Mark around tumor sections with Pap Pen and put 2% BSA/1% FBS maleic acid blocking buffer for 1 hr. Prepare the slides individually as to not let them dry out during this step.
14. Prepare primary antibodies at optimal dilution in blocking buffer. (If the antibodies in use are all of different species (or IgG chain variation-ex: IgG1 vs IgG2a of same species) they may be used in combination during a single incubation period. If antibody species overlap, then incubations must be carried out sequentially to minimize antibody cross-reaction.)
15. At this point, leave two slides with blocking buffer only. These two slides will serve as unstained control and nuclear stain control. The other single color controls will be incubated with individual primary antibodies. Only the analysis slide will have a combination of primary antibodies.
16. Incubate slides with primary antibody in a moisture chamber box on slow-rotating shaker at 4 ° overnight (~16-20 hr) (Note: when working with 4+ fluorophores, sequential staining or direct conjugation may be necessary to minimize antibody cross-reaction. Under these circumstances repeat steps 1.16-1.21 until all antibodies are applied to the slides.)
17. Wash slides for 10 min in PBST (2x) gently on shaker
18. While wash is going, prepare Alexafluor 488, 594 and 647 secondary antibodies for a final dilution of 1:1,000 in blocking buffer. (Make sure these antibodies and dilutions are kept at 4 °C and in the dark at all times to preserve fluorescence across batches and over time.)
19. On the single color control slides, place single Alexafluor dilutions matching the species of the primary antibody used. All secondary antibodies will be placed on the analysis slide. The unstained and the nuclear stained control slides will remain with blocking buffer throughout this step.
20. Incubate in a moisture chamber box (covered with aluminum foil to avoid light exposure) on slow rotating shaker at RT for 2 hr.
21. Wash slides for 5 min in PBST (2x) gently on shaker. Cover with aluminum foil to protect from light.
22. Add DAPI (1:10,000) for 1 min to the DAPI-only slide and the analysis slide. Cover with aluminum foil to protect from light. The other slides may be left covered in the wash containers.
23. Wash the two DAPI-incubated slides in a separate container for the first 5 min wash as to not contaminate the other slides with DAPI stain. For the second 5 min wash, the slides can be combined in PBST (all washes should be conducted on a shaker). Cover with aluminum foil to protect from light.
24. Briefly dip slides in water before cover-slipping (1.5 thickness with aqueous mounting media to preserve fluorescence)
25. Let dry 3 hr in dark at RT.
26. Seal the edges of the cover slip with nail hardener. (Do not use nail polish as the acetone may quench the fluorescent signal).
27. Analyze slides immediately or store at 4 °C for future analysis.

4. Multispectral Imaging

1. Collect multispectral Images utilizing a Nuance EX camera (containing a liquid crystal tunable filter) on an Olympus X-63 upright microscope with Nuance software for data collection.
2. Collect images using an oil objective to increase the resolution.
3. Initial set-up includes setting the spectral range for each fluorophore in use.
   1. For 4 color:
      1. DAPI: 420-480nm
      2. AF488: 490-580nm
      3. AF594: 590-640nm
      4. AF647: 650-720nm
4. Take an initial image of the analysis slide to obtain the proper exposure times for each of the spectral ranges.
5. Create "spectral library" that the software will use to identify and separate the signal-to-noise ratio of the fluorophores from each other and background signal. (Note: Each fluorochrome must have its own single color control slide in order to assemble a spectral library with appropriate wavelength curves to ensure proper analysis of the data set. Example: 3 fluorophores = 4 control slides; 5 fluorophores = 6 control slides).
   1. Image the unstained slide first. This slide will be designated within the spectral library as background.>
   2. Image the DAPI-only slide second. This slide will be used to designate the DAPI-stained nuclei with the "draw" tool and will be saved within the spectral library as DAPI.>
   3. Image the AF488-only slide third. This slide will be used to designate the AF488-stained regions with the "draw" tool and will be saved within the spectral library as AF488.>
   4. Image the AF594-only slide fourth. This slide will be used to designate the AF594-stained regions with the "draw" tool and will be saved within the spectral library as AF594.>
   5. Image the AF647-only slide fifth. This slide will be used to designate the AF647-stained regions with the "draw" tool and will be saved within the spectral library as AF647.>
   6. Following the collection of each individual spectral component, save the spectral library and the protocol.>
6. Once the spectral library is complete, find regions of interest on the analysis slide on the microscope and collect/save images.>

5. Quantitative Analysis of Multispectral Images

1. Import a representative assortment of acquired Nuance images using InForm Software.
2. Open the saved spectral library as directed by the program
3. Identify tissue regions of interest to be analyzed. (e.g. Tumor tissue versus adipose tissue).
4. Identify individual cells based on DAPI-stain. Cytoplasm will be defined automatically based on the shape of the nucleus.
5. Pick the fluorescent intensity read-out of choice for each fluorescent parameter (e.g. mean, standard deviation)
6. Batch the acquired images and let the software process using the proposed algorithm.
7. When the image processing is finished, merge the result files.
8. Open the results in Excel (or any other analytical software package) and plot two fluorescent intensities against each other on XY axis. Each fluorescent intensity is given per cell. The double positive cells will appear in the upper right quadrant. User must define the baseline fluorescent intensities.

Wyniki

Using a multispectral imaging technique to analyze tumors engrafted in our transgenic BMT mouse model, we are able to discern stromal tumor components that are of bone marrow origin. The initial BMT was confirmed three weeks post-transplant by flow cytometry (Figure 1). Orthotopically injected unlabeled ovarian tumors following BMT engraftment confirmations were excised and formalin fixed 6 weeks following initial tumor injection. Paraffin embedded tumor sections were sectioned in <8 μm slic...

Dyskusje

Herein we describe the application of multispectral imaging we describe as MIMicc- multispectral interrogation of Multiplexed cellular compositions, to analyze the bone marrow derived stromal components of the tumor microenvironment, however this methodology and concept can be applied to deciphering other cellular elements that compose a complex tissues such as those seen during wound healing reactions or during a regenerative tissue. In these experiments we utilize transgenic mice to fluorescently distinguish the...

Materiały

Name	Company	Catalog Number	Comments
.2 μm filter	Fisher	09-740-35A
10 ml lure lock	BD	309604
25 G needle	Cardinal	BF305122
40nm filter	BD	352340
50 ml conical tube	Fisher	1495949A
Alexafluor 488-ms1	invitrogen	A21121
Alexafluor 594-Rb	invitrogen	A21207
Alexafluor 647-ch	Invitrogen	A21449
BSA	Sigma	A7906-500G
Cover slips	Corning	2940-243
CRI-Nuance	Caliper Life Sciences
Dapi	Invitrogen	D1306
DMEM	CellGro	10-017-CV
Ethanol	Dharmacon	4004-DV
FBS	invitrogen	16000-044
GFP-ms1	Abcam	ab38689
Insulin needle	BD	329424
Maleic acid	Acros	100-16-7
Moisture chamber box	Evergreen	240-9020-Z10
Mounting media	dako	S3023
Nail hardener	Sally Hansen	2103
Pap pen	Abcam	Ab2601
Pen/Strep L Glut	invitrogen	10378016
Steril PBS	invitrogen	14040-182
Trypsin	invitrogen	252000-56
Blocking Buffer maleic acid 14.51 g NaCl 10.95 g NaOH pellets (to 7.5pH) 9+g Distilled water 250 ml *add 0.2% Tween-20 to 1x solution for blocking buffer with 2%BSA/2%FBS. Stir and filter. Antigen retrieval buffers: Tris-EDTA Buffer (10 mM Tris Base, 1 mM EDTA Solution, 0.05% Tween 20, pH 9.0) Tris Base 1.21 g EDTA 0.37 g Distilled water 1000 ml (100 ml to make 10x, 50 ml to make 20x) Tween 20 0.5 ml *Store at RT for 3 months or at 4 ° C for longer Sodium Citrate Buffer (10 mM Sodium Citrate, 0.05% Tween 20, pH 6.0) Tri-sodium citrate (dihydrate) 2.94 g Distilled water 1000 ml HCl (adjust pH to 6.0) 1N Tween 20 0.5 ml