Detection of Inter-chromosomal Stable Aberrations by Multiple Fluorescence In Situ Hybridization (mFISH) and Spectral Karyotyping (SKY) in Irradiated Mice

Podsumowanie

The present protocol describes the usefulness of multiple fluorescence in situ hybridization (mFISH) and spectral karyotyping (SKY) in identifying inter-chromosomal stable aberrations in the bone marrow cells of mice after exposure to total body irradiation.

Streszczenie

Ionizing radiation (IR) induces numerous stable and unstable chromosomal aberrations. Unstable aberrations, where chromosome morphology is substantially compromised, can easily be identified by conventional chromosome staining techniques. However, detection of stable aberrations, which involve exchange or translocation of genetic materials without considerable modification in the chromosome morphology, requires sophisticated chromosome painting techniques that rely on in situ hybridization of fluorescently labeled DNA probes, a chromosome painting technique popularly known as fluorescence in situ hybridization (FISH). FISH probes can be specific for whole chromosome/s or precise sub-region on chromosome/s. The method not only allows visualization of stable aberrations, but it can also allow detection of the chromosome/s or specific DNA sequence/s involved in a particular aberration formation. A variety of chromosome painting techniques are available in cytogenetics; here two highly sensitive methods, multiple fluorescence in situ hybridization (mFISH) and spectral karyotyping (SKY), are discussed to identify inter-chromosomal stable aberrations that form in the bone marrow cells of mice after exposure to total body irradiation. Although both techniques rely on fluorescent labeled DNA probes, the method of detection and the process of image acquisition of the fluorescent signals are different. These two techniques have been used in various research areas, such as radiation biology, cancer cytogenetics, retrospective radiation biodosimetry, clinical cytogenetics, evolutionary cytogenetics, and comparative cytogenetics.

Wprowadzenie

The two most reliable methods of identifying radiation-induced inter-chromosomal stable aberrations are multiple fluorescence in situ hybridization (mFISH), which allows the painting of two or more chromosomes simultaneously, and spectral karyotyping (SKY), which imparts a distinct color to each homologous chromosome pair in the genome. Unlike unstable aberrations, stable aberrations are persistent in nature and may be propagated for several generations in irradiated populations¹, and are regarded as critical molecular "signatures" of radiation-induced cytogenetic lesions². Studies by various groups have shown that stable aberrations are associated with the pathogenesis and development of a number of diseases, including cancer³. Before the era of chromosome painting (also referred as molecular cytogenetics), the conventional G-banding technique was the only method for detecting stable chromosomal aberrations. However, chromosome banding is a challenge to cytogeneticists because the resolution is limited, reproducibility is uncertain, it is a labor-intensive procedure, and it requires highly skilled and experienced cytogeneticists for reliable data interpretation⁴. Moreover, the classic banding technique does not allow detection of complex chromosomal rearrangements, which involve the interaction of three or more breaks distributed among two or more chromosomes, a common outcome of radiation damage. Complex aberrations may persist in individuals many years after radiation exposure, making them useful for retrospective biodosimetry⁵. Therefore, an alternate approach was required to overcome the limitations of conventional banding techniques to detect stable chromosomal rearrangements.

In the late 1960s, the pioneering work of Gall and Pardue (1969) on molecular hybridization using nucleic acid probes labeled with radioactive material commenced a new era in the field of cytogenetics, which allowed detection of a specific DNA sequence on chromosomes⁶. However, the use of radioactive probes for molecular hybridization had several drawbacks: radioactive probes are relatively unstable, probe activity depends on radioactive decay of the isotope used, hybridization takes a longer time, the resolution is limited, the probes are relatively costly, and the radioactive materials are a health hazardous. Thus, it became necessary to develop and design non-radioactive probes. The introduction of fluorescent tagged nucleic acid probes in the 1980s and 1990s overcame the limitations of radioactive probes and greatly enhanced the safety, sensitivity, and specificity of the hybridization technique^7-10. Fluorescent probes give rise to extremely bright signals when observed under fluorescence microscopes equipped with the appropriate excitation and emission filters. Any loss, gain, or rearrangement of fluorescent labeled chromosome/s or a part of the chromosome is easily identifiable with this FISH technique.

Analysis of chromosomal aberrations by FISH painting has led to marked progress in cytogenetic research over the years. Designing fluorescent labeled probes for specific applications ranging from locus-specific probes to whole-chromosome painting probes has advanced the field significantly; this has also facilitated the detection of submicroscopic ("cryptic") rearrangement, which was not possible by conventional chromosome banding. Chromosome painting by mFISH and SKY have proven to be valuable tools for the identification of simple and complex inter-chromosomal rearrangements. The basic principles for both techniques are similar, but the method of detection and discrimination of fluorescent signal after in situ hybridization and the process of image acquisition are different. In mFISH, separate images of each of the four fluorochromes are captured by using narrow bandpass microscope filters; dedicated software is then used to combine the images. While in SKY, image acquirement is based on a combination of epifluorescence microscopy, charge-coupled device imaging, and Fourier spectroscopy, which allows the measurement of the entire emission spectrum with a single exposure at all image points. In both mFISH and SKY, monochrome images are captured independently, then merged, and finally, unique pseudo-colors are assigned to the chromosomes in monochromatic images based on the specific dye attached to each fluorochrome probe.

The contribution of mFISH and SKY analysis in the radiation biology field is remarkable, particularly for retrospective dose estimation of human exposure to IR (radiation biodosimetry)^11-14, radiation carcinogenesis risk assessment¹⁵, as well as detection and risk estimation of radiotherapy-related secondary cancer¹⁶. A recent study on mice has shown that a FISH-based chromosome painting technique is also an important tool for evaluating the efficacy of radiation countermeasure¹⁷. In the present study, the effect of total body radiation exposure on the induction of stable chromosomal aberrations in the bone marrow cells of mice has been demonstrated using mFISH and SKY techniques.

Access restricted. Please log in or start a trial to view this content.

Protokół

All animal studies were carried out in strict accordance with the recommendations in the Guide for the Care and Use of Laboratory Animals of the National Institutes of Health. The animal protocol was approved by the Institutional Animal Care and Use Committee of the University of Arkansas for Medical Sciences. All animals were housed under standard air-conditioned animal facility at 20 ± 2 °C with 10 - 15 hourly cycles of fresh air and free access to standard rodent food and water. Upon arrival, the mice were held in quarantine for 1 week and provided certified rodent chow.

1.Radiation Exposure and In Vivo Arrest of Metaphase Cells

1. Expose un-anesthetized mice to 2 Gy whole-body radiation in an irradiation chamber. During irradiation, place mice in a well-ventilated holding chamber to make sure they do not move freely and receive a uniform dose.
2. Inject 100 µL of 0.05% colchicine solution (colchicine powder dissolved in calcium and magnesium free PBS) intraperitoneally using a 25 G needle attached with 1 mL disposable syringe. Avoid injection directly into any organ.
3. Leave the animal in the cage for 2 h before bone marrow cell harvest. Observe the animal for any signs of pain or distress.

2. Bone Marrow Cell Harvest and Isolation of Bone Marrow Mononuclear Cells by Density Gradient Centrifugation

1. Euthanize the mouse by CO₂ asphyxiation.
2. Spray 70% ethanol on the dorsal and ventral side.
3. Make a 2 cm incision on the abdominal skin with sharp scissors. Grasp the skin on either side of the incision with blunt tweezers and gently pull open the abdominal muscles.
4. Cut off both the hind legs with scissors and immediately place them in pre-chilled PBS with 4% FBS.
5. Carefully clean all the muscles attached to the hind limb with a sharp razorblade and cotton gauze bandage.
6. Separate the tibia from the femur. Trim both tips of each bone with a razorblade.
7. Flush the contents of the bone marrow with 3 mL PBS (with 4% FBS) using a 23 G needle attached to a 3 mL syringe and collect the content in a 15 mL centrifuge tube. Pass the cell suspension at least 10 times through the needle to make a single cell suspension.
8. Carefully overlay the cell suspension on an equal volume of lymphocyte separation medium (3 mL) without disturbing the interface between the cell suspension and lymphocyte separation medium. Centrifuge at 400 x g for 30 min at room temperature.
9. Collect the buffy coat carefully without disturbing the other layers and transfer in a new 15 mL centrifuge tube.

3. Preparation of Metaphase Cell Spreads

1. Add 10 mL PBS to the tube containing the buffy coat.
2. Centrifuge at 400 x g for 5 min at room temperature.
3. Carefully remove the supernatant. Then break up the cell pellet with gentle tapping and add 10 mL PBS.
4. Centrifuge at 400 x g for 5 min at room temperature.
5. Remove the supernatant without disturbing the cell pellet, break up the pellet, and add 4 mL of pre-warmed hypotonic 0.075 M potassium chloride solution. Add hypotonic solution drop by drop with gentle constant shaking.
6. Incubate cells for 20 min at 37 °C in a water bath.
7. After hypotonic treatment, add an equal volume (4 mL) of fixative (methanol: glacial acetic acid, 3:1 v/v) in the 15 mL tube and mix gently by inverting the tube.
8. Centrifuge at 400 x g for 5 min at room temperature and discard the supernatant.
9. Break up the cell pellet with tapping followed by gentle vortex for a few seconds and add 3 mL of fixative solution drop by drop with constant shaking.
10. Incubate for 30 min at room temperature and then centrifuge at 400 x g for 5 min.
11. Remove the supernatant, break up the cell pellet with gentle tapping, and add 3 mL fresh fixative.
12. Centrifuge at 400 x g for 5 min at room temperature, and remove the supernatant. Break up the cell pellet with gentle tapping, and add fresh 3 mL fixative.
13. Repeat step 3.12 twice more.
14. Centrifuge at 400 x g for 5 min at room temperature, and remove supernatant without disturbing the cell pellet. Then add 400 to 600 µL fixative and mix thoroughly with pipetting.
15. Drop 30 µL fixed cells onto pre-cleaned and wet slides tilted at a 45° angle and allow the slides to air dry completely overnight.

4. Mouse Chromosome Painting by mFISH

1. Chromosome Denaturation
   1. Place the slide containing metaphase cell spreads in 2x SSC for 2 min at room temperature.
   2. Dehydrate the slide by serial ethanol washing for 2 min each in 70%, 80%, and 100%. Incubate for 60 min at 65 °C.
   3. Preheat 40 mL denaturation solution (70% formamide/2x SSC; pH 7.0) to 70 °C (± 2 °C) in a glass Coplin jar for 30 min. Denature chromosomes by incubating the slide in pre-warmed denaturation solution for 1 - 1.5 min.
   4. Quench slide immediately in ice-cold 70% ethanol for 2 min to stop the denaturation process as well as to prevent the denatured chromosomes from re-annealing. Then dehydrate by washing with 80% ethanol for 2 min. Repeat the ethanol wash with 100% ethanol for 2 min. Completely dry the slide at room temperature.
2. Denaturation and Hybridization of Probe Mixture
   1. Briefly centrifuge the probe mixture supplied by the manufacturer, transfer 10 µL of probe mixture into a 500 µL snap cap centrifuge tube, and denature by incubation at 80 °C (± 2 °C) in a water bath for 7 min.
   2. Place the centrifuge tube with probe mixture in a water bath at 37 °C for 10 min.
   3. Apply the denatured probe mixture onto the slide with denatured chromosomes.
   4. Carefully cover the area with an 18 mm x 18 mm glass cover slip and eliminate any visible air bubbles by very gently pressing the cover slip to slide. Seal all four sides of the cover slip with rubber cement and incubate for 12 h to 16 h in the dark at 37 °C in a humidified chamber for hybridization.
3. Post Hybridization Washing and Detection
   1. Carefully remove the rubber cement and the cover slip.
   2. Place slide in pre-warmed 0.4x SSC at 74 °C (± 2 °C) for 5 min.
   3. Wash slide in washing solution II (4x SSC/0.1% Tween-20) for 2 min.
   4. Place 20 µL of anti-fade mounting medium with DAPI counterstain (1.5 µg/mL) and cover with a glass coverslip. Press gently on coverslip with lab tissue to remove air bubbles and excess mounting solution. Seal the edges of coverslip with nail polish.
   5. View slides using a fluorescent microscope equipped with appropriate filters.

5. Spectral Karyotyping (SKY) of Mouse Chromosomes

1. Chromosome and Probe Denaturation
   1. Equilibrate slide in 2x SSC at room temperature for 2 min, without shaking.
   2. Dehydrate slide in an ethanol series (70%, 80%, and 100% ethanol) for 2 min each at room temperature. Air-dry the slide to remove the ethanol completely.
   3. Warm 40 mL denaturation solution (70% formamide/2x SSC; pH 7.0) in a glass Coplin jar for 30 min.
   4. Incubate slide in pre-warmed denaturation solution for 1 to 1.5 min.
   5. Immediately immerse the slide into ice-cold 70% ethanol for 2 min to stop the denaturation process as well as to prevent the denatured chromosomes from re-annealing.
   6. Dehydrate the slide by placing it into 80% ethanol for 2 min and then into 100% ethanol for 2 min at room temperature.
   7. Denature the SKY probe (vial #1 supplied by manufacturer) in a water bath set to 80 °C (± 2 °C) for 7 min, and then immediately place into a different water bath set to 37 °C for 10 min.
2. Probe Hybridization
   1. Add 10 µL of denatured SKY probe onto the denatured chromosomes.
   2. Carefully place an 18 mm x 18 mm glass coverslip onto the SKY probe so that no air bubbles are trapped under the coverslip.
   3. Seal the edges of the coverslip with rubber cement.
   4. Place the slide in a humidified lightproof chamber and incubate in the dark at 37 °C for 24 h to 36 h.
3. Post-hybridization Washing and Fluorescence Detection
   1. Remove rubber cement very carefully without disturbing the coverslip.
   2. Place the slide into pre-warmed rapid washing solution (0.4x SSC) at 72 °C (± 2 °C) for 5 min with constant shaking. Immerse slide into washing solution III (4x SSC/0.1% Tween 20) and incubate for 1 min while shaking.
   3. Optional: Add 80 µL of blocking reagent (vial #2 supplied by manufacturer) onto the area of hybridization, place a 24 mm x 60 mm plastic coverslip, and incubate in the dark at 37 °C for 30 min in a humidified chamber.
   4. Gently remove the plastic coverslip and wash the slide with pre-warmed (45 ºC) washing solution III for 5 min.
   5. Apply 80 µL of Cy5 staining reagent (vial #3 supplied by manufacturer), place a 24 mm x 60 mm plastic coverslip, and incubate at 37 °C in the dark for 40 min in a humidified chamber.
   6. Dip the slide into a glass Coplin jar containing pre-warmed (45 ºC) washing solution III (4x SSC/0.1% Tween 20) and incubate at 45 °C in a water bath for 2 min with shaking. Repeat this washing step 3 times.
   7. Apply 80 µL of Cy5.5 staining reagent (vial #4 supplied by manufacturer), place a 24 mm x 60 mm plastic coverslip, and incubate at 37 °C in the dark for 40 min in a humidified chamber.
   8. Wash the slide 3 times with pre-warmed (45 ºC) washing solution III.
   9. Hold the slide in a tilted position against a paper towel to drain excess fluid. Add 20 µL anti-fade DAPI reagent (vial #5 supplied by the manufacturer) and carefully place a 24 mm x 60 mm glass coverslip without introducing any air bubbles. Seal the edges of coverslip with nail polish and observe with an epifluorescence microscope equipped for capturing SKY images.

Access restricted. Please log in or start a trial to view this content.

Wyniki

Total body irradiation induces numerous chromosomal aberrations in the bone marrow cells of irradiated mice. The current protocol is optimized for in vivo mitotic arrest of bone marrow cells after radiation exposure, harvest of bone marrow cells from the hind legs of irradiated mice, isolation of bone marrow mononuclear cells by density gradient centrifugation, preparation of metaphase cell spreads, and subsequent detection of radiation-induced stable chromosomal aberrations by m...

Access restricted. Please log in or start a trial to view this content.

Dyskusje

Several critical steps determine the success of mFISH and SKY. The first and most critical step is to optimize the colchicine treatment for in vivo mitotic arrest of the bone marrow mononuclear cells. The colchicine concentration and treatment time individually or in concert determine the mitotic index as well as chromosome condensation-two important prerequisites for effective chromosome painting. A high colchicine concentration or longer treatment time leads to highly condensed chromosomes, incompatible for pr...

Access restricted. Please log in or start a trial to view this content.

Materiały

Name	Company	Catalog Number	Comments
Formamide	Sigma-Aldrich	221198-100ML
SSC Buffer 20× Concentrate	Sigma-Aldrich	S6639-1L
SKY Laboratory Reagent for Mouse	Applied Spectral Imaging	FPRPR0030/M40
CAD - Concentrated Antibody Detection Kit	Applied Spectral Imaging	FPRPR0033
Single Paints Customized - 3 Colors; Mouse chromosome 1: Red, Mouse chromosome 2: Green, Mouse chromosome 3: Aqua	Applied Spectral Imaging	FPRPR0182/10
Glass coverslips	Fisher Scientific	12-545B
Tween 20	Fisher Scientific	BP337-100
Hydrochloric acid, 37%, Acros Organics	Fisher Scientific	AC45055-0025
Fisherbrand Glass Staining Dishes  with Screw Cap	Fisher Scientific	08-816
KaryoMAX Potassium Chloride Solution	Life Technologies	10575-090
Fisherbrand Superfrost Plus Microscope Slides	Fisher Scientific	12-550-15
Colcemid powder	Fisher Scientific	50-464-757
Histopaque-1083	Sigma-Aldrich	10831
Shepherd Mark I, model 25 137Cs irradiator	J. L. Shepherd & Associates	Model 484B
Syringe 1 mL	BD Biosciences	647911
Ethyl Alcohol, 200 Proof	Fisher Scientific	MEX02761
PBS, (1x PBS Liq.), w/o Calcium and Magnesium	Fisher Scientific	ICN1860454
Fetal Bovine Serum	Fisher Scientific	10-437-010
Methanol	Fisher Scientific	A454SK-4
Glacial acetic acid	Fisher Scientific	AC295320010
Zeiss Microscope	Zeiss	AXIO Imager.Z2