Name: continuous measurement of biological noise in escherichia coli using time-lapse microscopy
Uploaded: 2021-04-27T12:30:00
Description: Watch this Scientific Journal Video about Continuous Measurement of Biological Noise in Escherichia Coli Using Time-lapse Microscopy at JoVE.com

We thank Mr. Gil Gelbert (Faculty of electric Engineering, Technion) for assisting with the MATLAB code. We thank Dr. Ximing Li (Faculty of bio-medical Engineering, Technion) for assisting with proofing this article. This research was partially supported by the Neubauer Family Foundation and Israel Ministry of Science, grant 2027345.

1.&#160;Media and culture preparation
<ol>
	<li>Prepare stock solution of 1,000x Carbenicillin (50 mg/mL) or relevant antibiotic.
	<ol>
		<li>.Weigh 0.5 g of carbenicillin. Add 10 mL of sterile H2O. Dissolve completely.</li>
		<li>Sterilize carbenicillin stock through a 0.22 &#181;m syringe filter. Aliquot the antibiotic solution and store at -20 &#176;C.</li>
	</ol>
	</li>
	<li>To prepare lysogeny&#160;broth (LB) plates, mix 5 g of tryptone, 5 g of NaCl, 2.5 g of yeast extract and 7.5 g of ...

<ol>
	<li>Daniel, R., Rubens, J. R., Sarpeshkar, R., Lu, T. K. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Synthetic+analog+computation+in+living+cells.">Synthetic analog computation in living cells.</a> Nature. 497, 619-623 (2013).</li><li>Yang, X. S. Y., L, A. B., Harwood, C., Jensen, G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=.">.</a> Imaging Bacterial Molecules, Structures and Cells. , (2016).</li><li>Joyce, G., Robertson, B. D., Williams, K. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+modified+agar+pad+method+for+mycobacterial+live-cell+imaging.">A modified agar pad method for mycobacterial live-cell imaging.</a> Biomedcentral Research Notes. , (2011).</li><li>Cotlet, M., Goodwin, P. M., Waldo, G. S., Werner, J. H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+comparison+of+the+fluorescence+dynamics+of+single+molecules+of+a+green+fluorescent+protein:+One-+versus+two-photon+excitation.">A comparison of the fluorescence dynamics of single molecules of a green fluorescent protein: One- versus two-photon excitation.</a> ChemPhysChem. , (2006).</li><li>Andersen, J. B., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=New+unstable+variants+of+green+fluorescent+protein+for+studies+of+transient+gene+expression+in+bacteria.">New unstable variants of green fluorescent protein for studies of transient gene expression in bacteria.</a> Applied and Environmental Microbiology. 64, 2240-2246 (1998).</li><li>Barger, N., Litovco, P., Li, X., Habib, M., Daniel, R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Synthetic+metabolic+computation+in+a+bioluminescence-sensing+system.">Synthetic metabolic computation in a bioluminescence-sensing system.</a> Nucleic Acids Research. , (2019).</li><li>Young, J. W., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Measuring+single-cell+gene+expression+dynamics+in+bacteria+using+fluorescence+time-lapse+microscopy.">Measuring single-cell gene expression dynamics in bacteria using fluorescence time-lapse microscopy.</a> Nature Protocols. , (2012).</li><li>Swain, P. S., Elowitz, M. B., Siggia, E. D. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Intrinsic+and+extrinsic+contributions+to+stochasticity+in+gene+expression.">Intrinsic and extrinsic contributions to stochasticity in gene expression.</a> Proceedings of the National Academy of Science United States. , (2002).</li><li>Elowitz, M. B., Levine, A. J., Siggia, E. D., Swain, P. S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Stochastic+gene+expression+in+a+single+cell.">Stochastic gene expression in a single cell.</a> Science. , (2002).</li><li>Baumgart, L., Mather, W., Hasty, J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Synchronized+DNA+cycling+across+a+bacterial+population.">Synchronized DNA cycling across a bacterial population.</a> Nature Genetics. , (2017).</li><li>Arriaga, E. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Determining+biological+noise+via+single+cell+analysis.">Determining biological noise via single cell analysis.</a> Analytical and Bioanalytical Chemistry. , (2009).</li><li>Nielsen, A. A. K., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Genetic+circuit+design+automation.">Genetic circuit design automation.</a> Science. , (2016).</li><li>Ozbudak, E. M., Thattai, M., Kurtser, I., Grossman, A. D., van Oudenaarden, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Regulation+of+noise+in+the+expression+of+a+single+gene.">Regulation of noise in the expression of a single gene.</a> Nature Genetics. 31, 69-73 (2002).</li><li>Pedraza, J. H., Van Oudenaarden, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Noise+propagations+in+gene+networks.">Noise propagations in gene networks.</a> Science. , (2005).</li><li>Jennifer, A. N. B., Christopher, A. V. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Principles+of+genetic+circuit+design.">Principles of genetic circuit design.</a> Nature Methods. , (2014).</li><li>Aoki, S. K., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+universal+biomolecular+integral+feedback+controller+for+robust+perfect+adaptation.">A universal biomolecular integral feedback controller for robust perfect adaptation.</a> Nature. , (2019).</li><li>Hanna, H. A., Danial, L., Kvatinsky, S., Daniel, R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=.">.</a> Cytomorphic Electronics with Memristors for Modeling Fundamental Genetic Circuits. 4545, (2020).</li><li>de Jong, I. G., Beilharz, K., Kuipers, O. P., Veening, J. W. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Live+cell+imaging+of+Bacillus+subtilis+and+Streptococcus+pneumoniae+using+automated+time-lapse+microscopy.">Live cell imaging of Bacillus subtilis and Streptococcus pneumoniae using automated time-lapse microscopy.</a> Journal of Visualized Experiments. , (2011).</li><li>Eling, N., Morgan, M. D., Marioni, J. C. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Challenges+in+measuring+and+understanding+biological+noise.">Challenges in measuring and understanding biological noise.</a> Nature Reviews Genetics. , (2019).</li><li>Thattai, M., Van Oudenaarden, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Attenuation+of+noise+in+ultrasensitive+signaling+cascades.">Attenuation of noise in ultrasensitive signaling cascades.</a> Biophysical Journal. , (2002).</li><li>Thattai, M., Van Oudenaarden, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Intrinsic+noise+in+gene+regulatory+networks.">Intrinsic noise in gene regulatory networks.</a> Proceedings of the National Academy of Science United States. , (2001).</li><li>Rosenfeld, N., Young, J. W., Alon, U., Swain, P. S., Elowitz, M. B. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Gene+regulation+at+the+single-cell+level.">Gene regulation at the single-cell level.</a> Science. , (2005).</li><li>Van Der Ziel, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=.">.</a> Noise in Measurements. , (1976).</li><li>Sambrook, J., Fritsch, E. F., Maniatis, T. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Molecular+cloning:+A+laboratory+manual.+2nd+Edition.">Molecular cloning: A laboratory manual. 2nd Edition.</a> Cold Spring Harbor Laboratory Press. , (1989).</li><li>Carpenter, A. E., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=CellProfiler:+Image+analysis+software+for+identifying+and+quantifying+cell+phenotypes.">CellProfiler: Image analysis software for identifying and quantifying cell phenotypes.</a> Genome Biology. , (2006).</li><li>Paintdakhi, A., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Oufti:+An+integrated+software+package+for+high-accuracy,+high-throughput+quantitative+microscopy+analysis.">Oufti: An integrated software package for high-accuracy, high-throughput quantitative microscopy analysis.</a> Molecular Microbiology. , (2016).</li><li>Ducret, A., Quardokus, E. M., Brun, Y. V. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=MicrobeJ,+a+tool+for+high+throughput+bacterial+cell+detection+and+quantitative+analysis.">MicrobeJ, a tool for high throughput bacterial cell detection and quantitative analysis.</a> Nature Microbiology. , (2016).</li><li>Stylianidou, S., Brennan, C., Molecular, S. B. N. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=.">.</a> SuperSegger: robust image segmentation, analysis and lineage tracking of bacterial cells - Stylianidou - 2016 - Molecular Microbiology. , (2016).</li><li>Balomenos, A. D., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Image+analysis+driven+single-cell+analytics+for+systems+microbiology.">Image analysis driven single-cell analytics for systems microbiology.</a> Biomedcentral System Biology. , (2017).</li><li>Smit, J. H., Li, Y., Warszawik, E. M., Herrmann, A., Cordes, T. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Colicoords:+A+Python+package+for+the+analysis+of+bacterial+fluorescence+microscopy+data.">Colicoords: A Python package for the analysis of bacterial fluorescence microscopy data.</a> PLoS One. , (2019).</li><li>Guido, N. J., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+bottom-up+approach+to+gene+regulation.">A bottom-up approach to gene regulation.</a> Nature. , (2006).</li><li>Beal, J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Signal-to-noise+ratio+measures+efficacy+of+biological+computing+devices+and+circuits.">Signal-to-noise ratio measures efficacy of biological computing devices and circuits.</a> Frontiers in Bioengineering and Biotechnology. , (2015).</li><li>Marr, D., Hildreth, E. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Theory+of+edge+detection.">Theory of edge detection.</a> Proceedings of the Royal Society - Biology Science. 207, 187-217 (1980).</li><li>Otsu, N. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Threshold+selection+method+from+gray-level+histograms.">Threshold selection method from gray-level histograms.</a> IEEE Transactions Systems Man Cybernetics. , (1979).</li><li>Soille, P. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=.">.</a> Morphological Image Analysis: Principles and Applications, Second edition. , (2000).</li><li>Bradley, D., Roth, G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Adaptive+Thresholding+using+the+Integral+Image.">Adaptive Thresholding using the Integral Image.</a> Journal of Graphics Tools. , (2007).</li><li>Meyer, F. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Topographic+distance+and+watershed+lines.">Topographic distance and watershed lines.</a> Signal Processing. , (1994).</li><li>Maurer, C. R., Qi, R., Raghavan, V. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+linear+time+algorithm+for+computing+exact+Euclidean+distance+transforms+of+binary+images+in+arbitrary+dimensions.">A linear time algorithm for computing exact Euclidean distance transforms of binary images in arbitrary dimensions.</a> IEEE Transactions on Pattern Analysis and Machine. , (2003).</li><li>Millo, R., Phillips, R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=What+is+the+maturation+time+for+fluorescent+proteins.">What is the maturation time for fluorescent proteins.</a> Cell Biology by Numbers. , (2015).</li></ol>

In this work, we developed a protocol that enables computer tracing of Escherichia coli live cells, following division and fluorescent levels over a period of hours. This protocol allows us to quantify the stochastic dynamics of genetic circuits in Escherichia coli by measuring the CV and SNR in real time. In this protocol, we compared the stochastic behaviors of two different circuits as shown in Figure 10. It has been shown that plasmids with low copy numbers are more prone to stochas...

Synthetic biology is a multidisciplinary field that has emerged in the past decade and aims to translate engineering design principles into rational biological design1,2,3, in an effort to achieve multi-signal integration and processing in living cells for understanding the basic science4,5, diagnostic, therapeutic and biotechnological applications6,7,8,9,10. Our ability to quantify the input-output response of synthetic gene circuits has been revolutionized by recent advances in single-cell technology, including the flow analyzer and live cell imaging using automated time-lapse microscopy11. A flow analyzer is often used to measure the response of these circuits at the steady state1,12, and inverted microscopy is used to measure the dynamic response of synthetic gene circuits at the level of a single cell3. For example, one of the early works in synthetic biology involved the construction of genetic oscillator networks in living cells using negative feedback loops with a delay3. Later on, the genetic oscillator circuits were applied to understand metabolic control in the dynamic environment of living cells4. Automated time-lapse microscopy is one method to characterize such circuits. We hypothesize that the host cells, Escherichia coli, synchronize when forming micro colonies, allowing measurement of signal and calculation of noise without tracking exact mother-daughter relations.
Noise is a fundamental, inherent aspect of biological systems often arising from multiple sources. Consider for example, biochemical reactions involving signals that originate from the transport of discrete random carriers such as diffusion of proteins13. These signals propagate with random fluctuations14. Other noise sources are resource availability, cell division and variations in environmental conditions such as temperature, humidity and pressure. Biological signals that propagate in synthetic gene circuits often have a very low signal to noise ratio (SNR), which disturbs the performance of such circuits. Therefore, genetic circuit design remains one of the most challenging aspects of genetic engineering15. For example, in contrast to most approaches which calculate only the mean gene expression (measured over the entire cell population), the variance of the measured signal is considered in order to engineer predictable behavior through synthetic gene networks12. As such, the levels of variability or noise in the protein expression play a dominant role in design and performance of analog and digital gene circuits1,16,17.
Many approaches has been developed to quantify cell-to-cell variability, including in Escherichia coli3,7,18. These methods are often used to study gene activation and metabolic pathways, however with less focus on the study of stochastic noise dynamics, like measuring and disentangling specific noise sources, especially for genetic circuits in living cells where this is a fundamental challange19,20,21. Several factors, both inherited to the circuit itself (intrinsic) and derived from the host cells (extrinsic), can disturb the continuous performance of genetic circuits. In this paper, we developed a protocol that aims to quantify the total noise in Escherichia coli&#160;cells, including the intrinsic and extrinsic noise sources6,22. By quantifying the total noise and then evaluating the SNR23, the design of gene circuits can be improved. This method can be modified to measure independent noise sources separately, by monitoring several fluorescent proteins6,20. For the protocol described here, we keep the environmental conditions well controlled and continuously measure the activity of cells without the influence of external factors. We measure the signal from fluorescent proteins in single cells over time and simultaneously image them under an agarose substrate. The resulting images are analyzed using the laboratory&#39;s custom MATLAB.
Ideally, continuous measurement of the real time activity of fluorescent proteins inside a cell will produce accurate data through the growth and division of the cells. However, it is challenging to acquire such data. This is due to degradation of fluorescent proteins, known as photo-bleaching7, when they are exposed to radiation in the excitation process. Furthermore, Escherichia coli cells are also sensitive for the excitation, which might lead to phototoxicity7. Both issues limit the amount of photo frames that can be acquired and the time between acquisitions. The substrate and medium types (e.g., lysogeny broth) that is used to grow the cells during imaging also have a critical role. We strongly recommend using minimal medium, which minimizes non-fluorescent background and extends cell division time.
Moreover, the sample needs to be prepared considering the following requirements (1) Low cell division rate allows for less frequent exposures for closely imaging the division cycle and reducing the probability of phototoxicity and photobleaching. We set the acquisition time to about half of the predicted mitosis time (2) Low cell density at the beginning of the experiment allows for better uniformity and trackability of division. Cell density is affected by the dilution ratio of the Escherichia coli cells, which is a significant parameter for the success of this protocol and needs to be determined for every lab. In order to establish the ratio, each new Escherichia coli strain or media used should be fitted with growth rate graphs (Supplementary Figure 1). An appropriate ratio has been achieved if cells can grow without additional shaking after a short incubation from an initial density of about OD600nm = 0.1. Cells at this phase will divide according to the environment temperature only (3) Restriction of cell movement: cell movement strongly depends on substrate (agarose pad) firmness. The substrate firmness depends on the amount of total agarose and the gel solidification time. Gels cannot be left to solidify overnight at room temperature, as the Escherichia coli will undergo mitosis. Other factors that affect substrate stability include the amount of water in the sample and humidity. Additional issues are discussed in detail in the&#160;Representative Results. This protocol provides many details and gradually moves from one step to another. The protocol offers long stability for imaging experiments and provides a basic image processing tool.&#160;

<table border="0" cellpadding="0" cellspacing="0" style="width:748px;" width="747">
	<tbody>
		<tr height="21">
			<td height="21" style="height:21px;width:223px;">35mm glass dish</td>
			<td style="width:216px;">mattek</td>
			<td style="width:137px;">P35G-0.170-14-C</td>
			<td style="width:172px;">thickness corresponding with microscope lense.</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:223px;">Agarose&#160;</td>
			<td style="width:216px;">Lonza</td>
			<td style="width:137px;">5004</td>
			<td>LB preperation</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:223px;">AHL&#160;</td>
			<td style="width:216px;">Sigma-Aldrich</td>
			<td style="width:137px;">K3007</td>
			<td>inducer</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:223px;">Bacto tryptone&#160;</td>
			<td style="width:216px;">BD - Becton, Dickinson and Company&#160;</td>
			<td style="width:137px;">211705</td>
			<td>LB preperation</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:223px;">Carb</td>
			<td style="width:216px;">Invitrogen</td>
			<td style="width:137px;">10177-012</td>
			<td>antibiotic</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:223px;">Carb</td>
			<td style="width:216px;">Formedium</td>
			<td style="width:137px;">CAR0025</td>
			<td>antibiotic</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:223px;">Casamino acids&#160;</td>
			<td style="width:216px;">BD - Becton, Dickinson and Company&#160;</td>
			<td style="width:137px;">223050</td>
			<td>minimal media solution</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:223px;">eclipse Ti</td>
			<td style="width:216px;">nikon</td>
			<td style="width:137px;"></td>
			<td>inverted microscope</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:223px;">Glucose</td>
			<td style="width:216px;">Sigma-Aldrich</td>
			<td style="width:137px;">G5767</td>
			<td>minimal media solution</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:223px;">Glyserol</td>
			<td style="width:216px;">Bio-Lab</td>
			<td style="width:137px;">000712050100</td>
			<td>minimal media substrate</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:223px;">Immersol 518F</td>
			<td style="width:216px;">zeiss</td>
			<td style="width:137px;">4449600000000</td>
			<td>immersion oil</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:223px;">M9 salt solution&#160;</td>
			<td style="width:216px;">Sigma-Aldrich</td>
			<td style="width:137px;">M6030</td>
			<td>minimal media solution</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:223px;">NaCl</td>
			<td style="width:216px;">Bio-Lab</td>
			<td style="width:137px;">214010</td>
			<td>LB preperation</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:223px;">Noble agar</td>
			<td style="width:216px;">Sigma-Aldrich</td>
			<td style="width:137px;">A5431</td>
			<td>minimal media substrate</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:223px;">parafilm tape</td>
			<td style="width:216px;">Bemis</td>
			<td style="width:137px;">PM-996</td>
			<td>refered to as tape in text</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:223px;">Seaplaque GTG Agarose</td>
			<td style="width:216px;">Lonza</td>
			<td style="width:137px;">50111</td>
			<td>minimal media substrate</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:223px;">thaymine B1</td>
			<td style="width:216px;">Sigma-Aldrich</td>
			<td style="width:137px;">T0376&#160;</td>
			<td>minimal media solution</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:223px;">Yeast Extract</td>
			<td style="width:216px;">BD - Becton, Dickinson and Company&#160;</td>
			<td style="width:137px;">212750</td>
			<td>LB preperation</td>
		</tr>
	</tbody>
</table>

continuous measurement of biological noise in escherichia coli using time-lapse microscopy

The protocol developed here offers a tool to enable computer tracking of Escherichia coli division and fluorescent levels over several hours. The process starts by screening for colonies that survive on minimal media, assuming that only Escherichia coli harboring the correct plasmid will be able to thrive in the specific conditions. Since the process of building large genetic circuits, requiring the assembly of many DNA parts, is challenging, circuit components are often distributed between multiple plasmids at different copy numbers requiring the use of several antibiotics. Mutations in the plasmid can destroy transcription of the antibiotic resistance genes and interject with resources management in the cell leading to necrosis. The selected colony is set on a glass-bottom Petri dish and a few focus planes are selected for microscopy tracking in both bright field and fluorescent domains. The protocol maintains the image focus for more than 12 hours under initial conditions that cannot be regulated, creating a few difficulties. For example, dead cells start to accumulate in the lenses' field of focus after a few hours of imaging, which causes toxins to buildup and the signal to blur and decay. Depletion of nutrients introduces new metabolic processes and hinder the desired response of the circuit. The experiment's temperature lowers the effectivity of inducers and antibiotics, which can further damage the reliability of the signal. The minimal media gel shrinks and dries, and as a result the optical focus changes over time. We developed this method to overcome these challenges in Escherichia coli, similar to previous works developing analogous methods for other micro-organisms. In addition, this method offers an algorithm to quantify the total stochastic noise in unaltered and altered cells, finding that the results are consistent with flow analyzer predictions as shown by a similar coefficient of variation (CV).

The software analyzes bright field domain images that are off-white and black. The Escherichia coli will look like black oblong shapes on an off-white background and dynamic range of luminance should show a spike at its center (Figure 1). In fluorescent images cells may have a small halo but individual cells with oblong shapes can still be resolved. A mitosis event should be first detected after 30 minutes. Microscope focus should remain stable over time and although cells might mov...

Watch this Scientific Journal Video about Continuous Measurement of Biological Noise in Escherichia Coli Using Time-lapse Microscopy at JoVE.com

Continuous Measurement of Biological Noise in Escherichia Coli Using Time-lapse Microscopy

This work presents a microscopy method that allows live imaging of a single cell of Escherichia coli for analysis and quantification of the stochastic behavior of synthetic gene circuits.

Continuous Measurement of Biological Noise in Escherichia Coli Using Time-lapse Microscopy

The protocol developed here offers a tool to enable computer tracking of Escherichia coli division and fluorescent levels over several hours. The process ...

This protocol in herbals continuous measurement of genetic circuits in E.coli and the calculation of the signal variability and signal-to-noise ratio in individual bacterial cell to assess circuit performance. The main advantages of this technique are that it is easily adaptable to different strains and labs, requires minimal training and no special equipment, and is relatively inexpensive. Noise is a significant role in determining the functionality of biological systems.Currently, there is an interest in building large scale gene circuits. These systems can be inhibited by noise Be sure to dry the samples well, to keep that chill pads at four degrees Celsius for as long as possible, and to cut and divide the parts patiently and gently. To prepare the bacteria for the analysis inoculate a single colony from a transfected E.coli culture.For example, a circuit with a GFP reporter. In a glass tube containing five milliliters of LB broth supplement it with the relevant antibiotics. Grow the cells at 37 degrees Celsius and 250 revolutions per minute in a shaking incubator for two hours until the broth is cloudy.At the end of the incubation, spin down one milliliter of dilution solution in a two milliliter mini micro centrifuge, and transfer 30 microliters of bacteria and the entire volume of dilution solution into a new two milliliter tube. Then, incubate the culture for one hour with shaking before seeding 40 to 60 microliters of this suspension onto M9 culture plates. To prepare the bacteria for the analysis, inoculate a single colony from a transfected E.Coli culture.For example, a circuit with a GFP reporter in a glass tube containing five milliliters of LB broth supplemented with the relevant antibiotics. Grow the cells at 37 degrees Celsius and 250 revolutions per minute in a shaking incubator for two hours until the broth is cloudy. At the end of the incubation, spin down one milliliter of dilution solution in a two milliliter mini micro centrifuge tube and transfer 30 microliters of bacteria and the entire volume of dilution solution into a new two milliliter tube.Then incubate the culture for one hour with shaking. To prepare microscope plates, mix 112.5 milligrams of low melting agar with 40 milligrams of agar, and one milliliter of 2%casamino acid in a 25 milliliter Erlenmeyer flask. Next, add 8.92 milliliters of minimal medium over the inner lips of a 25 milliliter Erlenmeyer flask and microwave the resulting solution in short, two to three second bursts.Then set the water bath to 55 degrees Celsius. When the solution is clear, place the 25 milliliter Erlenmeyer flask in a 60 degrees Celsius water bath and allow the agar solution to cool until its temperature falls to about 45 to 50 degrees Celsius. While the agar cooling, clean the lab bench with 70%ethanol and smooth a piece of lab tape onto the cleaned bench.Place one glass cover slip onto the tape and place a second cover slip close by. Add cooled agar solution to the appropriate antibiotics and solution. Pour 1.5 milliliters of freshly prepared to gel solution onto the cover slip placed over the tape and place the second cover slip onto the gel, taking care to avoid bubbles.Return the Erlenmeyer to the hot water bath and cover the cover slips for 20 minutes. Flip the cover slips for a one hour incubation at four degrees Celsius. At the end of the incubation, remove the cover slips from the dry gel and cut a small pad from the agarose.During the incubation, add six microliter droplets of the prepared bacterial suspension into a 35 millimeter dish and allow the drops to dry for at least 15 to 30 minutes. Then carefully place the pad at a time onto one droplet of bacteria and allow the samples to set for 20 minutes at room temperature. To place the agar bed without smearing the sample, carefully position the cool pad onto the droplet with gentle tapping.To image the samples, remove the flask from the water and allow the gel solution to cool to body temperature. Pour three millimeters of the gel onto the perimeter of the sample plate. When the agarose has solidified, seal the plate with tape and use a 25 gauge needle to piece several holes into the tape.Then place the plate upside down at four degrees Celsius for at least 30 minutes to allow the agarose to fully solidify, while preventing cell mitosis. Within 24 hours, use a fluorescence confocal microscope to locate the sample at the lowest magnification and engage the automatic focus system of the microscope. Apply oil to the appropriate objective and use the platform controller to move the plate to carefully spread the oil.Then engage the automatic focus again and follow the default suggestion for Z step cross-sections to image the sample. The E.coli should appear as black oblong shapes on an off white background. And the dynamic range of the luminance should show a spike at its center.Mitosis events can first be detected by fluorescence microscopy after 30 minutes. Although individual cells may be hard to detect at low magnification. Bacterial cell cultures prepared at an incorrect dilution ratio can demonstrate unchanging numbers of cells, and samples prepared without plate sealing can exhibit excessive shrinkage, resulting in a loss of focus.Cells can also indent the gel in their search for nutrients, resulting in stacking of the bacterial cells on top of each other and compromising the cell monolayer, effectively preventing cell detection and reliable fluorescent signal measurement. As suggested by these data, the cell stage in the division cycle does not affect the noise level, as different ranges of area demonstrate the same trend. Further, no substantial change in signal-to-noise ratio is observed between GFP and superfold GFP, as illustrated by these representative data.When performing this procedure, take care to determine the correct dilution ratio for the bacterial strain used for the experiment. Comparing the signal-to-noise ratio of each regulated circuits to this base line allows selection of the best performance circuit and can reveal interesting phenomena

continuous-measurement-biological-noise-escherichia-coli-using-time

Research

JoVE Journal

Bioengineering

Engineering Biological-Based Vascular Grafts Using a Pulsatile Bioreactor

Much effort has been devoted to develop and advance the methodology to regenerate functional small-diameter arterial bypasses. In the physiological environment, both mechanical and chemical stimulation are required to maintain the proper development and functionality of arterial vessels1,2.
Bioreactor culture systems developed by our group are designed to support vessel regeneration within a precisely controlled chemo-mechanical environment mimicking that of native vessels. Our bioreactor assembly and maintenance procedures are fairly simple and highly repeatable3,4. Smooth muscle cells (SMCs) are seeded onto a tubular polyglycolic acid (PGA) mesh that is threaded over compliant silicone tubing and cultured in the bioreactor with or without pulsatile stimulation for up to 12 weeks. There are four main attributes that distinguish our bioreactor from some predecessors. 1) Unlike other culture systems that simulate only the biochemical surrounding of native blood vessels, our bioreactor also creates a physiological pulsatile environment by applying cyclic radial strain to the vessels in culture. 2) Multiple engineered vessels can be cultured simultaneously under different mechanical conditions within a controlled chemical environment. 3) The bioreactor allows a mono layer of endothelial cells (EC) to be easily coated onto the luminal side of engineered vessels for animal implantation models. 4) Our bioreactor can also culture engineered vessels with different diameter size ranged from 1 mm to 3 mm, saving the effort to tailor each individual bioreactor to fit a specific diameter size. 
The engineered vessels cultured in our bioreactor resemble native blood vessels histologically to some degree. Cells in the vessel walls express mature SMC contractile markers such as smooth muscle myosin heavy chain (SMMHC)3. A substantial amount of collagen is deposited within the extracellular matrix, which is responsible for ultimate mechanical strength of the engineered vessels5. Biochemical analysis also indicates that collagen content of engineered vessels is comparable to that of native arteries6. Importantly, the pulsatile bioreactor has consistently regenerated vessels that exhibit mechanical properties that permit successful implantation experiments in animal models3,7. Additionally, this bioreactor can be further modified to allow real-time assessment and tracking of collagen remodeling over time, non-invasively, using a non-linear optical microscopy (NLOM)8. To conclude, this bioreactor should serve as an excellent platform to study the fundamental mechanisms that regulate the regeneration of functional small-diameter vascular grafts.

Our group has developed a bioreactor culture system that mimics the physiological pulsatile stresses of the cardiovascular system to regenerate implantable small-diameter vascular grafts.

Much effort has been devoted to develop and advance the methodology to regenerate functional small-diameter arterial bypasses. In the physiological ...

Three-dimensional Optical-resolution Photoacoustic Microscopy

Optical microscopy, providing valuable insights at the cellular and organelle levels, has been widely recognized as an enabling biomedical technology. As the mainstays of in vivo three-dimensional (3-D) optical microscopy, single-/multi-photon fluorescence microscopy and optical coherence tomography (OCT) have demonstrated their extraordinary sensitivities to fluorescence and optical scattering contrasts, respectively. However, the optical absorption contrast of biological tissues, which encodes essential physiological/pathological information, has not yet been assessable. 
The emergence of biomedical photoacoustics has led to a new branch of optical microscopy optical-resolution photoacoustic microscopy (OR-PAM)1, where the optical irradiation is focused to the diffraction limit to achieve cellular1 or even subcellular2 level lateral resolution. As a valuable complement to existing optical microscopy technologies, OR-PAM brings in at least two novelties. First and most importantly, OR-PAM detects optical absorption contrasts with extraordinary sensitivity (i.e., 100%). Combining OR-PAM with fluorescence microscopy3 or with optical-scattering-based OCT4 (or with both) provides comprehensive optical properties of biological tissues. Second, OR-PAM encodes optical absorption into acoustic waves, in contrast to the pure optical processes in fluorescence microscopy and OCT, and provides background-free detection. The acoustic detection in OR-PAM mitigates the impacts of optical scattering on signal degradation and naturally eliminates possible interferences (i.e., crosstalks) between excitation and detection, which is a common problem in fluorescence microscopy due to the overlap between the excitation and fluorescence spectra. 
Unique for optical absorption imaging, OR-PAM has demonstrated broad biomedical applications since its invention, including, but not limited to, neurology5, 6, ophthalmology7, 8, vascular biology9, and dermatology10. In this video, we teach the system configuration and alignment of OR-PAM as well as the experimental procedures for in vivo functional microvascular imaging.

Optical-resolution photoacoustic microscopy (OR-PAM) is an emerging technology capable of imaging optical absorption contrasts in vivo with cellular resolution and sensitivity. Here, we provide a visualized instruction on the experimental protocols of OR-PAM, including system configuration, system alignment, typical in vivo experimental procedures, and functional imaging schemes.

Optical microscopy, providing valuable insights at the cellular and organelle levels, has been widely recognized as an enabling biomedical technology. As ...

Fluorescent Nanoparticles for the Measurement of Ion Concentration in Biological Systems

Tightly regulated ion homeostasis throughout the body is necessary for the prevention of such debilitating states as dehydration.1 In contrast, rapid ion fluxes at the cellular level are required for initiating action potentials in excitable cells.2 Sodium regulation plays an important role in both of these cases; however, no method currently exists for continuously monitoring sodium levels in vivo 3 and intracellular sodium probes 4 do not provide similar detailed results as calcium probes. In an effort to fill both of these voids, fluorescent nanosensors have been developed that can monitor sodium concentrations in vitro and in vivo.5,6 These sensors are based on ion-selective optode technology and consist of plasticized polymeric particles in which sodium specific recognition elements, pH-sensitive fluorophores, and additives are embedded.7-9 Mechanistically, the sodium recognition element extracts sodium into the sensor. 10 This extraction causes the pH-sensitive fluorophore to release a hydrogen ion to maintain charge neutrality within the sensor which causes a change in fluorescence. The sodium sensors are reversible and selective for sodium over potassium even at high intracellular concentrations.6 They are approximately 120 nm in diameter and are coated with polyethylene glycol to impart biocompatibility. Using microinjection techniques, the sensors can be delivered into the cytoplasm of cells where they have been shown to monitor the temporal and spatial sodium dynamics of beating cardiac myocytes.11 Additionally, they have also tracked real-time changes in sodium concentrations in vivo when injected subcutaneously into mice.3 Herein, we explain in detail and demonstrate the methodology for fabricating fluorescent sodium nanosensors and briefly demonstrate the biological applications our lab uses the nanosensors for: the microinjection of the sensors into cells; and the subcutaneous injection of the sensors into mice.

Fluorescent nanoparticles produced in our lab are used for imaging ion concentrations and ion fluxes in biological systems such as cells during signaling and interstitial fluid during physiological homeostasis.

Tightly regulated ion homeostasis throughout the body is necessary for the prevention of such debilitating states as dehydration.1 In contrast, rapid ion ...

Time-lapse Fluorescence Imaging of Arabidopsis Root Growth with Rapid Manipulation of The Root Environment Using The RootChip

The root functions as the physical anchor of the plant and is the organ responsible for uptake of water and mineral nutrients such as nitrogen, phosphorus, sulfate and trace elements that plants acquire from the soil. If we want to develop sustainable approaches to producing high crop yield, we need to better understand how the root develops, takes up a wide spectrum of nutrients, and interacts with symbiotic and pathogenic organisms. To accomplish these goals, we need to be able to explore roots in microscopic detail over time periods ranging from minutes to days.
We developed the RootChip, a polydimethylsiloxane (PDMS)- based microfluidic device, which allows us to grow and image roots from Arabidopsis seedlings while avoiding any physical stress to roots during preparation for imaging1 (Figure 1). The device contains a bifurcated channel structure featuring micromechanical valves to guide the fluid flow from solution inlets to each of the eight observation chambers2. This perfusion system allows the root microenvironment to be controlled and modified with precision and speed. The volume of the chambers is approximately 400 nl, thus requiring only minimal amounts of test solution.
Here we provide a detailed protocol for studying root biology on the RootChip using imaging-based approaches with real time resolution. Roots can be analyzed over several days using time lapse microscopy. Roots can be perfused with nutrient solutions or inhibitors, and up to eight seedlings can be analyzed in parallel. This system has the potential for a wide range of applications, including analysis of root growth in the presence or absence of chemicals, fluorescence-based analysis of gene expression, and the analysis of biosensors, e.g. FRET nanosensors3.

This article provides a protocol for cultivation of Arabidopsis seedlings in the RootChip, a microfluidic imaging platform that combines automated control of growth conditions with microscopic root monitoring and FRET-based measurement of intracellular metabolite levels.

The root functions as the physical anchor of the plant and is the organ responsible for uptake of water and mineral nutrients such as nitrogen, ...

In situ TEM of Biological Assemblies in Liquid

Researchers regularly use Transmission Electron Microscopes (TEMs) to examine biological entities and to assess new materials. Here, we describe an additional application for these instruments- viewing viral assemblies in a liquid environment. This exciting and novel method of visualizing biological structures utilizes a recently developed microfluidic-based specimen holder. Our video article demonstrates how to assemble and use a microfluidic holder to image liquid specimens within a TEM. In particular, we use simian rotavirus double-layered particles (DLPs) as our model system. We also describe steps to coat the surface of the liquid chamber with affinity biofilms that tether DLPs to the viewing window. This permits us to image assemblies in a manner that is suitable for 3D structure determination. Thus, we present a first glimpse of subviral particles in a native liquid environment.

In situ TEM of Biological Assemblies in Liquid

Here we describe a procedure to image viral complexes in liquid at nanometer resolution using a transmission electron microscope.

Researchers regularly use Transmission Electron Microscopes (TEMs) to examine biological entities and to assess new materials. Here, we describe an ...

Sample Drift Correction Following 4D Confocal Time-lapse Imaging

The generation of four-dimensional (4D) confocal datasets; consisting of 3D image sequences over time; provides an excellent methodology to capture cellular behaviors involved in developmental processes.&#160; The ability to track and follow cell movements is limited by sample movements that occur due to drift of the sample or, in some cases, growth during image acquisition. Tracking cells in datasets affected by drift and/or growth will incorporate these movements into any analysis of cell position. This may result in the apparent movement of static structures within the sample. Therefore prior to cell tracking, any sample drift should be corrected. Using the open source Fiji distribution 1 &#160;of ImageJ 2,3 and the incorporated LOCI tools 4, we developed the Correct 3D drift plug-in to remove erroneous sample movement in confocal datasets. This protocol effectively compensates for sample translation or alterations in focal position by utilizing phase correlation to register each time-point of a four-dimensional confocal datasets while maintaining the ability to visualize and measure cell movements over extended time-lapse experiments.

Time-lapse microscopy allows the visualization of developmental processes. Growth or drift of samples during image acquisition reduces the ability to accurately follow and measure cell movements during development. We describe the use of open source image processing software to correct for three dimensional sample drift over time.

The generation of four-dimensional (4D) confocal datasets; consisting of 3D image sequences over time; provides an excellent methodology to capture ...

Surface Potential Measurement of Bacteria Using Kelvin Probe Force Microscopy

Surface potential is a commonly overlooked physical characteristic that plays a dominant role in the adhesion of microorganisms to substrate surfaces. Kelvin probe force microscopy (KPFM) is a module of atomic force microscopy (AFM) that measures the contact potential difference between surfaces at the nano-scale. The combination of KPFM with AFM allows for the simultaneous generation of surface potential and topographical maps of biological samples such as bacterial cells. Here, we employ KPFM to examine the effects of surface potential on microbial adhesion to medically relevant surfaces such as stainless steel and gold. Surface potential maps revealed differences in surface potential for microbial membranes on different material substrates. A step-height graph was generated to show the difference in surface potential at a boundary area between the substrate surface and microorganisms. Changes in cellular membrane surface potential have been linked with changes in cellular metabolism and motility. Therefore, KPFM represents a powerful tool that can be utilized to examine the changes of microbial membrane surface potential upon adhesion to various substrate surfaces. In this study, we demonstrate the procedure to characterize the surface potential of individual methicillin-resistant Staphylococcus aureus USA100 cells on stainless steel and gold using KPFM.

Here, we present a protocol explaining the use of Kelvin probe force microscopy as a tool for generating high resolution nano-scale surface potential maps. This tool was applied to assess the role of surface potential on the binding capacity of microorganisms to substrate surfaces.

Surface potential is a commonly overlooked physical characteristic that plays a dominant role in the adhesion of microorganisms to substrate surfaces. ...

Design and Construction of Artificial Extracellular Matrix (aECM) Proteins from Escherichia coli for Skin Tissue Engineering

Recombinant technology is a versatile platform to create novel artificial proteins with tunable properties. For the last decade, many artificial proteins that have incorporated functional domains derived from nature (or created de novo) have been reported. In particular, artificial extracellular matrix (aECM) proteins have been developed; these aECM proteins consist of biological domains taken from fibronectin, laminins and collagens and are combined with structural domains including elastin-like repeats, silk and collagen repeats. To date, aECM proteins have been widely investigated for applications in tissue engineering and wound repair. Recently, Tjin and coworkers developed integrin-specific aECM proteins designed for promoting human skin keratinocyte attachment and propagation. In their work, the aECM proteins incorporate cell binding domains taken from fibronectin, laminin-5 and collagen IV, as well as flanking elastin-like repeats. They demonstrated that the aECM proteins developed in their work were promising candidates for use as substrates in artificial skin. Here, we outline the design and construction of such aECM proteins as well as their purification process using the thermo-responsive characteristics of elastin.

Design and Construction of Artificial Extracellular Matrix aECM Proteins from Escherichia coli for Skin Tissue Engineering

Recombinant technologies have enabled material designers to create novel artificial proteins with customized functionalities for tissue engineering applications. For example, artificial extracellular matrix proteins can be designed to incorporate structural and biological domains derived from native ECMs. Here, we describe the construction and purification of aECM proteins containing elastin-like repeats.

Recombinant technology is a versatile platform to create novel artificial proteins with tunable properties. For the last decade, many artificial proteins ...

Synthesis of Infectious Bacteriophages in an E. coli-based Cell-free Expression System

A new generation of cell-free transcription-translation (TXTL) systems, engineered to have a greater versatility and modularity, provide novel capabilities to perform basic and applied sciences in test tube reactions. Over the past decade, cell-free TXTL has become a powerful technique for a broad range of novel multidisciplinary research areas related to quantitative and synthetic biology. The new TXTL platforms are particularly useful to construct and interrogate biochemical systems through the execution of synthetic or natural gene circuits. In vitro TXTL has proven convenient to rapidly prototype regulatory elements and biological networks as well as to recapitulate molecular self-assembly mechanisms found in living systems. In this article, we describe how infectious bacteriophages, such as MS2 (RNA), &#934;&#935;174 (ssDNA), and T7 (dsDNA), are entirely synthesized from their genome in one-pot reactions using an all Escherichia coli, cell-free TXTL system. Synthesis of the three coliphages is quantified using the plaque assay. We show how the yield of synthesized phage depends on the biochemical settings of the reactions. Molecular crowding, emulated through a controlled concentration of PEG 8000, affects the amount of synthesized phages by orders of magnitudes. We also describe how to amplify the phages and how to purify their genomes. The set of protocols and results presented in this work should be of interest to multidisciplinary researchers involved in cell-free synthetic biology and bioengineering.

Synthesis of Infectious Bacteriophages in an E. coli-based Cell-free Expression System

A new generation of cell-free transcription-translation platforms has been engineered to construct biochemical systems in vitro through the execution of gene circuits. In this article, we describe how bacteriophages, such as MS2, &#934;&#935;174, and T7, are synthesized from their genome using an all E. coli cell-free TXTL system.

A new generation of cell-free transcription-translation (TXTL) systems, engineered to have a greater versatility and modularity, provide novel ...

Stiffness Measurement of Soft Silicone Substrates for Mechanobiology Studies Using a Widefield Fluorescence Microscope

Soft tissues in the human body typically have stiffness in the kilopascal (kPa) range. Accordingly, silicone and hydrogel flexible substrates have been proven to be useful substrates for culturing cells in a physical microenvironment that partially mimics in vivo conditions. Here, we present a simple protocol for characterizing the Young's moduli of isotropic linear elastic substrates typically used for mechanobiology studies. The protocol consists of preparing a soft silicone substrate on a Petri dish or stiff silicone, coating the top surface of the silicone substrate with fluorescent beads, using a millimeter-scale sphere to indent the top surface (by gravity), imaging the fluorescent beads on the indented silicone surface using a fluorescence microscope, and analyzing the resultant images to calculate the Young's modulus of the silicone substrate. Coupling the substrate's top surface with a moduli extracellular matrix protein (in addition to the fluorescent beads) allows the silicone substrate to be readily used for cell plating and subsequent studies using traction force microscopy experiments. The use of stiff silicone, instead of a Petri dish, as the base of the soft silicone, enables the use of mechanobiology studies involving external stretch. A specific advantage of this protocol is that a widefield fluorescence microscope, which is commonly available in many labs, is the major equipment necessary for this procedure. We demonstrate this protocol by measuring the Young's modulus of soft silicone substrates of different elastic moduli.

Substrates with stiffness in the kilopascal-range are useful to study the response of cells to physiologically relevant micro-environment stiffness. Using just a widefield fluorescence microscope, the Young's modulus of soft silicone gels can be determined using an indentation with a suitable sphere.

Soft tissues in the human body typically have stiffness in the kilopascal (kPa) range. Accordingly, silicone and hydrogel flexible substrates have been ...