Efficient iPS Cell Generation from Blood Using Episomes and HDAC Inhibitors

Summary

Here we describe a protocol for generating human induced pluripotent stem cells from peripheral blood using an episome based reprogramming strategy and histone deacetylase inhibitors.

Abstract

This manuscript illustrates a protocol for efficiently creating integration-free human induced pluripotent stem cells (iPSCs) from peripheral blood using episomal plasmids and histone deacetylase (HDAC) inhibitors. The advantages of this approach include: (1) the use of a minimal amount of peripheral blood as a source material; (2) nonintegrating reprogramming vectors; (3) a cost effective method for generating vector free iPSCs; (4) a single transfection; and (5) the use of small molecules to facilitate epigenetic reprogramming. Briefly, peripheral blood mononuclear cells (PBMCs) are isolated from routine phlebotomy samples and then cultured in defined growth factors to yield a highly proliferative erythrocyte progenitor cell population that is remarkably amenable to reprogramming. Nonintegrating, nontransmissible episomal plasmids expressing OCT4, SOX2, KLF4, MYCL, LIN28A, and a p53 short hairpin (sh)RNA are introduced into the derived erythroblasts via a single nucleofection. Cotransfection of an episome that expresses enhanced green fluorescent protein (eGFP) allows for easy identification of transfected cells. A separate replication-deficient plasmid expressing Epstein-Barr nuclear antigen 1 (EBNA1) is also added to the reaction mixture for increased expression of episomal proteins. Transfected cells are then plated onto a layer of irradiated mouse embryonic fibroblasts (iMEFs) for continued reprogramming. As soon as iPSC-like colonies appear at about twelve days after nucleofection, HDAC inhibitors are added to the medium to facilitate epigenetic remodeling. We have found that the inclusion of HDAC inhibitors routinely increases the generation of fully reprogrammed iPSC colonies by 2 fold. Once iPSC colonies exhibit typical human embryonic stem cell (hESC) morphology, they are gently transferred to individual iMEF-coated tissue culture plates for continued growth and expansion.

Introduction

iPSCs are derived from somatic tissues via ectopic expression of a minimal set of pluripotency genes. This technique was initially demonstrated by retroviral transduction of human fibroblasts with OCT4, SOX2, KLF4, and cMYC, which are highly expressed in the pluripotent state¹. These transiently expressed “reprogramming factors” alter the target cell’s epigenetic landscape and gene expression profile analogous to human embryonic stem cells². Once created, iPSCs can potentially be differentiated into any tissue type for further investigation. Thus, they hold promise for use in regenerative medicine, disease modeling, and gene therapy applications. However, disrupting the genome with integrating viruses has the potential to alter endogenous gene expression, influence cellular phenotype, and ultimately bias scientific results. Furthermore, random viral integrations can lead to deleterious cellular effects, including the possibility of malignant transformation³ or re-expression of the oncogenic transgenes⁴. Future clinical applications will require non-integrating iPSC generation.

Episomes, which are extra chromosomal circular DNA molecules, offer a strategy to generate cost effective, integration-free iPSCs⁵. The combination of episomal vectors shown in Table 1 express the reprogramming factors OCT4, SOX2, KLF4, MYCL, and LIN28A. The pCXLE_hOCT3/4-shp53-F plasmid also contains a p53 shRNA for temporary suppression of TP53 to enhance cellular reprogramming⁶. The replication deficient pCXWB-EBNA1 vector promotes amplification of reprogramming factors and increased reprogramming efficiency by providing a transient increase in EBNA1 expression⁷. The pCXLE_EGFP plasmid can be added to the nucleofection mixture for the purpose of determining the transfection efficiency or for cell sorting applications. With the exception of pCXWB-EBNA1, the episomal plasmids used in this protocol contain the Epstein-Barr virus origin of viral replication and EBNA1 gene, which mediate replication and partition of the episome during division of the host cell⁸. The episomes are spontaneously lost with successive iPSC expansion⁷. Subcloning and characterization of iPSCs with episomal vector loss, which can be inferred from loss of eGFP expression, can lead to completely integration free iPSCs for future clinical applications.

Inherent to the process of iPSC generation is suppression of lineage specific genes and reactivation of pluripotency-associated genes. Regulation of gene expression occurs at multiple levels within the nucleus, including modifications to DNA and chromatin to allow transcription factors, regulatory DNA elements, and RNA polymerase access to target genes. Remodeling of the epigenetic landscape via global chromatin modifications is a key component to re-expression of the pluripotency genetic program. A specific chromatin modification that is important in regulation of gene expression is acetylation of histones at particular lysine residues, which allows access to target genes through decreased tension of the histone-DNA coil. HDAC inhibitors are small molecules that have been shown to enhance iPSC reprogramming and hESC self-renewal^9,10, likely due to supporting the acetylated state¹¹. The protocol described below, adapted from a prior publication using integrating lentiviruses¹², provides a step-by-step method for optimized iPSC generation from peripheral blood using episomes and HDAC inhibitors. The HDAC inhibitor concentrations used here are half of those described by Ware, et al.⁹, and have routinely led to a 2 fold increase in fully reprogrammed iPSC colonies over standard episomal reprogramming protocols without HDAC inhibitors. This level of reprogramming is on par with the efficiency we observe with lentiviral methods. Using this protocol, we have efficiently generated iPSC from individuals as old as 87 years of age.

Protocol

Written informed consent, as approved by the Institutional Review Boards of the Fred Hutchinson Cancer Research Center and the Children"s Hospital of Philadelphia, was obtained from patients before collecting peripheral blood samples. All institutional guidelines were observed. All animal experiments including MEF generation and teratoma formation were approved by the Institutional Animal Care and Use Committee.

1. Ficoll Separation of PBMCS and Expansion of Erythroblasts – Day 0

1. Dilute peripheral blood 1:1 with Dulbecco’s Phosphate Buffered Saline (DPBS). In a 15 ml round-bottom polystyrene tube, carefully layer 7 ml of diluted blood onto 3 ml of room temperature Ficoll-Hypaque.
2. Centrifuge the sample at 400 x g for 30 min.
3. The PBMCs will have settled to the interface between the plasma and the Ficoll-Hypaque, seen as a cloudy white layer. Using a sterile transfer pipette, collect the PBMCs into one 15 ml conical tube. Bring the volume to 10 ml using DPBS.
4. Using a hemacytometer, count the PBMCs.
5. Pipette 2 × 10⁶ PBMCs into a separate 15 ml conical tube and centrifuge at 300 x g for 5 min. Spin down the remaining cells and freeze at a concentration of 2 × 10⁶ PBMCs/ml in 90% fetal bovine serum (FBS)/10% dimethyl sulfoxide (DMSO).
6. Prepare Expansion Medium: QBSF-60 serum free medium (protect from light) + penicillin/streptomycin (1%) + ascorbic acid (50 ng/ml) + stem cell factor (SCF, 50 ng/ml) + interleukin 3 (IL-3, 10 ng/ml) + erythropoietin (EPO, 2 U/ml) + insulin-like growth factor 1 (IGF-1, 40 ng/ml) + dexamethasone (1 μM; protect from light; thaw a fresh aliquot each media change).
7. Resuspend 2 × 10⁶ PBMCs in 2 ml of freshly made Expansion Medium and place into one well of a 12 well tissue culture plate and incubate in a 37 °C humidified incubator with an atmosphere of 5% O₂, 5% CO₂, and 90% N₂.
8. On Day 3 and Day 6, replace media.
   1. Collect the cells and wash the well with 2 ml of QBSF-60 to collect any remaining cells.
   2. Centrifuge the cell suspension at 300 x g for 5 min and aspirate the supernatant.
   3. Resuspend the cells in 2 ml of new Expansion Medium and return them to the same 12 well plate.

2. Reprogramming Cells by Nucleofection – Day 9

1. Pipette the reprogramming plasmids into a sterile 1.5 ml Eppendorf tube (Table 1).
2. Mix the nucleofection solution with Supplement (supplied by manufacturer) and pipette into a sterile 1.5 ml Eppendorf tube.
3. Pipette 2 ml of Expansion Medium into one well of a 12 well plate and place in a humidified 37 °C incubator (5% O₂, 5% CO₂, and 90% N₂) for equilibration prior to adding cells.
4. Collect the cultured cells and wash the well with 2 ml of QBSF-60 to collect remaining cells.
5. Centrifuge the cells at 300 x g for 5 min and aspirate the supernatant.
6. Wash the cells by resuspending in 5 ml of DPBS and centrifuging at 300 x g for 5 min.
7. Aspirate the supernatant.
8. Resuspend the cell pellet in 100 μl of nucleofection solution + Supplement, taking care to avoid generating bubbles.
9. Pipette the cell suspension into the tube containing the reprogramming plasmids, pipette up and down once, and pipette the sample into the bottom of the nucleofection cuvette.
10. Place the cuvette into the nucleofection machine and run Program T-019.
11. Transfer 100 μl of the prewarmed Expansion Medium (from the equilibrating plate in Step 2.3) into the nucleofection cuvette.
12. Immediately collect the entire sample and deposit into the well of pre-warmed Expansion Medium. Avoid collecting the white, floating dead cell debris.
13. Place the plate in a humidified 37 °C incubator (5% O₂, 5% CO₂, and 90% N₂) for growth.

3. Plating Feeder Cells – Day 10 or 11

1. On Day 10, plate feeder cells.
   1. Coat one 6 well tissue culture plate with gelatin.
      1. Pipette 1 m  of 0.1% gelatin in Hank’s Buffered Saline Solution (HBSS) into each well of the plate.
      2. Place the plate in a humidified 37 °C incubator for at least 5 min.
      3. Immediately before use, aspirate the gelatin solution from the plate.
   2. Thaw one vial of 2 × 10⁶ mouse embryonic fibroblasts irradiated at 3,000 cGy into 10 ml of prewarmed MEF Media (Dulbecco’s Modified Eagle Medium (DMEM) + FBS (10%) + penicillin/streptomycin (1%)).
   3. Centrifuge the cells at 300 x g for 5 min and aspirate the supernatant. Resuspend the cells in 12 ml of MEF Media and pipette 2 ml into each well of the gelatin-coated 6 well plate. Place the plate in a humidified 37 °C incubator (5% O₂, 5% CO₂, and 90% N₂) until Day 12.

4. Plating Cells on Feeder Cells and Changing Medium – Day 12

1. Collect the nucleofected cells into one 15 ml conical tube and collect any remaining cells by washing the well with 2 ml of QBSF-60. Centrifuge the sample at 300 x g for 5 min.
2. Prepare Reprogramming Medium: Iscove’s Modified Dulbecco’s Medium (IMDM) + FBS (10%) + non-animal L-glutamine (1 mM) + non-essential amino acids (NEAA, 1%) + penicillin/streptomycin (1%) + β-mercaptoethanol (0.1 mM) + basic fibroblast growth factor (bFGF, added fresh at feeding, 10 ng/ml) + ascorbic acid (added fresh at feeding, 50 μg/ml).
3. Aspirate the supernatant and resuspend the cells in 12 ml of Reprogramming Medium. Pipette 2 ml per well of the cell suspension into the 6 well plate of feeder cells (as prepared in Section 3). Centrifuge the plate at 50 x g for 30 min at room temperature.
4. Place the plate in a humidified 37 °C incubator (5% O₂, 5% CO₂, and 90% N₂) for growth. Change the Reprogramming Medium every other day until iPSC colonies begin appearing (1-2 weeks).
5. Prepare hESC Medium: DMEM/F12 1:1 + Knockout Serum Replacement (20%) + penicillin/streptomycin (1%) + NEAA (1%) + non-animal L-glutamine (1 mM) + sodium pyruvate (1%) + sodium bicarbonate (0.12%) + β-mercaptoethanol (0.1 mM) + bFGF (added fresh at feeding, 10 ng/ml)
6. Prepare HDAC inhibitors: sodium butyrate (added fresh at feeding, 100 μM), suberanilohydroxamic acid (SAHA, added fresh at feeding, 200 nM). Once iPSC colonies appear, begin feeding the cells with hESC Medium + HDAC inhibitors, changing medium every day.
   NOTE: Sodium butyrate is a small molecule that is adsorbed to plastic tubes, therefore store it in a borosilicate glass tube at 4 °C.

5. Isolating iPSC Clones

1. Once iPSC colonies are large enough to be isolated (20-25 cells), pick them with a P20 pipette.
2. Prepare HDAC inhibitors: sodium butyrate (added fresh at feeding, 100 μM), SAHA (added fresh at feeding, 200 nM)
3. Place the isolated colonies onto iMEFs in individual 35 mm dishes containing hESC Medium + HDAC inhibitors + Cloning & Recovery Supplement.
4. The day after picking the colonies, change the medium to hESC Medium + HDAC inhibitors.
5. Change the medium every day until iPSC colonies are ready for passaging.
6. Remove HDAC inhibitors from the medium once colonies stabilize at passage 2-3.

Results

Three days after nucleofection and before plating the nucleofected cells onto iMEFs, the efficiency of successful nucleofection should be estimated by fluorescence microscopy for eGFP. Figure 1 shows a typical nucleofection experiment with approximately 5-10% of the total cell population expressing eGFP.

Reprogrammed iPSC colonies will begin to appear approximately two weeks after nucleofection. The colonies are generally circular with well-defined borders and may be identifie...

Discussion

For successful iPSC generation when using this protocol, there are several important caveats that should be considered. During the erythroblast expansion stage, the media change schedule should be strictly followed, as deviations may lead to inefficient stimulation of the target progenitor cell population and a lower efficiency of iPSC generation. It is important to make new expansion medium with fresh dexamethasone with each media change; and the QBSF-60 base medium and dexamethasone should be protected from light durin...

Materials

Name	Company	Catalog Number	Comments
Ficoll-Paque PLUS	Fisher Scientific	45-001-750	Store at 4 °C. Warm to room temperature before use.
DPBS	Life Technologies	14190-250	Store at 4 °C.
RPMI 1640	Life Technologies	11875-093	Store at 4 °C.
fetal bovine serum (FBS)	Life Technologies	10437028	Store at -20 °C until needed. Thaw, aliquot, store at 4 °C.
dimethyl sulfoxide (DMSO)	Sigma-Aldrich	154938	Store at room temperature.
QBSF-60 serum-free medium	Fisher Scientific	50-983-234	Store at 4 °C.
penicillin/streptomycin	Life Technologies	15140122	Store at 4 °C.
Cell Line Nucleofector Kit V	Lonza	VCA-1003	Store at 4 °C.
2% gelatin solution	Sigma-Aldrich	G1393	Store at 4 °C, liquify in 37 °C water bath before use.
Hank's Balanced Saline Solution (HBSS)	Life Technologies	14175-103	Store at 4 °C.
Dulbecco's Modified Eagle Medium (DMEM)	Life Technologies	11965-092	Store at 4 °C.
Iscove's Modified Dulbecco's Medium (IMDM)	Life Technologies	12440-061	Store at 4 °C.
L-glutamine, 200 mM	Life Technologies	25030-081	Aliquot, freeze at -20 °C.
non-essential amino acids (NEAA), 100X	Life Technologies	11140-050	Store at 4 °C, away from light.
DMEM/Ham's F12, 1:1	Fisher Scientific	SH30023.02	Store at 4 °C.
KnockOut Serum Replacement	Life Technologies	10828-028	Aliquot, freeze at -20 °C.
sodium pyruvate, 100 mM	Life Technologies	11360-070	Store at 4 °C.
sodium bicarbonate, 7.5%	Life Technologies	25080094	Store at 4 °C.
basic fibroblast growth factor (bFGF)	Life Technologies	PHG0263	Make 10 mg/ml stock in DPBS, aliquot, freeze at -20 °C. Once thawed, store at 4 °C.
sodium butyrate	Sigma-Aldrich	B5887-1G	Make 2000x stock (400 mM) in DPBS, aliquot, freeze at -20 °C. Once thawed, store at 4 °C.
hES Cell Cloning & Recovery Supplement	Stemgent	01-0014-500	Store at -20 °C until needed. Once thawed, store at 4 °C.
ESC-qualified BD matrigel	BD Biosciences	35-4277	Thaw overnight on ice at 4 °C, aliquot into pre-chilled tubes using pre-chilled pipette tips. Store at -20 °C until needed. Thaw at 4 °C, use immediately.
StemSpan SFEM	STEMCELL Technologies	9650	Aliquot, freeze at -20 °C.
ascorbic acid, powdered	Sigma-Aldrich	A4403-100MG	Make 5 mg/ml stock in DPBS, sterile filter, store at 4 °C.
recombinant human stem cell factor (SCF)	R & D Systems	255-SC-010	Make 100 μg/m stock in SFEM, aliquot, freeze at -20 °C. Once thawed, store at 4 °C.
recombinant human interleukin 3 (IL-3)	R & D Systems	203-IL-010	Make 100 μg/ml stock in SFEM, aliquot, freeze at -20 °C. Once thawed, store at 4 °C.
erythropoietin (EPO)	R & D Systems	287-TC-500	Make 1000 U/ml stock in SFEM, aliquot, freeze at -20 °C. Once thawed, store at 4 °C.
recombinant human insulin-like growth factor 1 (IGF-1)	R & D Systems	291-G1-200	Make 100 μg/ml stock in SFEM, aliquot, freeze at -20 °C. Once thawed, store at 4 °C.
β-mercaptoethanol	Sigma-Aldrich	M7522	Make 1000x stock (100 mM) in DPBS.
dexamethasone	Sigma-Aldrich	D4902-25MG	Make 50x stock (50 μM) in DPBS, sterile filter, store at 4 °C.
SAHA (vorinostat)	Cayman Chemical	149647-78-9	Make 2,000x stock (400 mM) in DPBS, aliquot, freeze at -20 °C. Once thawed, store at 4 °C.
12 well tissue culture plate	Fisher Scientific	08-772-29
15 ml conical tube	Sarstedt	62553002
1.5 ml Eppendorf tube	Fisher Scientific	05-408-129
6 well tissue culture plate	Fisher Scientific	08-772-1B
35 mm tisue culture plates	BD Biosciences	353001
10 ml disposable serological pipettes	Fisher Scientific	13-675-20
5 ml disposable serological pipettes	Fisher Scientific	13-675-22
2 ml disposable serological pipettes	Fisher Scientific	13-675-17
20 μl pipette tips, barrier tips	Genessee	24-404
glass Pasteur pipettes	Fisher Scientific	13-678-20D
pipette aid	Fisher Scientific	13-681-15
pCXLE-hOCT3/4-shp53-F	Addgene	27077
pCXLE-hSK	Addgene	27078
pCXLE-hUL	Addgene	27080
pCXLE-EGFP	Addgene	27082
pCXWB-EBNA1	Addgene	37624