Evaluation of Zebrafish Kidney Function Using a Fluorescent Clearance Assay

Summary

The zebrafish is a popular tool to model chronic kidney disease (CKD). However, their small size makes it impossible to evaluate renal function using traditional methods. We describe a fluorescent dye kidney clearance assay¹ that allows quantitative analysis of zebrafish kidney function in CKD.

Abstract

The zebrafish embryo offers a tractable model to study organogenesis and model human genetic disease. Despite its relative simplicity, the zebrafish kidney develops and functions in almost the same way as humans. A major difference in the construction of the human kidney is the presence of millions of nephrons compared to the zebrafish that has only two. However, simplifying such a complex system into basic functional units has aided our understanding of how the kidney develops and operates. In zebrafish, the midline located glomerulus is responsible for the initial blood filtration into two pronephric tubules that diverge to run bilaterally down the embryonic axis before fusing to each other at the cloaca. The pronephric tubules are heavily populated by motile cilia that facilitate the movement of filtrate along the segmented tubule, allowing the exchange of various solutes before finally exiting via the cloaca^2-4. Many genes responsible for CKD, including those related to ciliogenesis, have been studied in zebrafish⁵. However, a major draw back has been the difficulty in evaluating zebrafish kidney function after genetic manipulation. Traditional assays to measure kidney dysfunction in humans have proved non translational to zebrafish, mainly due to their aquatic environment and small size. For example, it is not physically possible to extract blood from embryonic staged fish for analysis of urea and creatinine content, as they are too small. In addition, zebrafish do not produce enough urine for testing on a simple proteinuria ‘dipstick’, which is often performed during initial patient examinations. We describe a fluorescent assay that utilizes the optical transparency of the zebrafish to quantitatively monitor the clearance of a fluorescent dye, over time, from the vasculature and out through the kidney, to give a read out of renal function^1,6-9.

Introduction

The human kidney plays a crucial role in filtering metabolic waste from the blood and recovering required solutes to sustain cellular homeostasis. There are a number of human genetic diseases that cause kidney dysfunction. The most common inherited renal disease is autosomal dominant polycystic kidney disease (ADPKD) characterized by the development of fluid filled sacs within nephritic tubules; the damage caused by cystogenesis is detrimental to kidney function¹⁰. ADPKD has an occurrence of 1:800 - 1:1,000 and accounts for 8 - 10% of patients in end stage renal failure (ESRF)¹¹. Several genes have been implicated to cause ADPKD including polycystin-1 (PKD1) and -2 (PKD2), accounting for approximately 85% and 15% of cases respectively^12,13. Furthermore, the gene products for PKD1 and -2 localize to the cilium and are fundamental to ciliogenesis^14,15. There is now a recognized family of human genetic disorders, known as the ciliopathies, which affect cilia function and result in CKD¹⁶.

The growing number of human genetic diseases affecting ciliary development and function is drawing global interest in this once considered vestigial organelle. The cilium, a hair-like cellular protrusion, is enriched with receptors and ion channels necessary for the transduction of key cell signaling events. The cilium consists of a microtubule-based axoneme, typically structured into nine radially arranged microtubule doublets with or without a central pair of singlet microtubules. The axonemal structure defines the type and mode of ciliary action. The 9+2 microtubule arrangement confers motility to the cilium where it is utilised in the movement of fluids across epithelial surfaces. The 9+0 configuration is non motile but is believed to mainly function in cellular signalling events¹⁷. Apart from CKD, the consequences of ciliary dysfunction are a set of characteristic ciliopathy features that include, obesity, retinal degeneration, polydactyly, and cognitive impairment¹⁶. However, CKD is amongst the most detrimental to the patient’s quality of life and therefore a major driving force behind the development of appropriate in vivo models for ciliary related CKD.

The zebrafish is an excellent model to understand the etiology of human genetic disease. Their quick development, production of large number of eggs, transparent tissue, and ex utero growth allows zebrafish developmental processes to be visualized and biological events manipulated with considerable ease. Genes can be genetically altered using the recent success of genome editing tools (CRISPR¹⁸ and TALENS¹⁹), knocked down using antisense morpholino technology²⁰, or pharmacologically regulated by the addition of compounds to their aquatic environment. Indeed, zebrafish offer a platform to undertake experiments that are not permissive in other animal models. Whilst zebrafish are relatively simple vertebrates (compared to humans) they share many functionally conserved organs, genes, and signaling processes in common with humans. For example, the zebrafish kidney is remarkably similar in structure and function compared to humans^21,22. However, unlike the mammalian kidney that develops through a succession of phases, each marked by a more developed kidney (pronephros, mesonephros, and metanephros), the embryonic zebrafish only develops a pronephros, the most immature form of a kidney. Whilst millions of nephrons can be found forming the building blocks of the mammalian kidney, the zebrafish embryo only possess two. The glomeruli, which allow for the initial blood filtrate, are fused at the midline just ventral to the aorta. Blood filters through the glomeruli into the pronephric tubules that run caudally along the axis, fusing prior to exit via the cloaca. The pronephric tubules are heavily ciliated with motile cilia that are permissive to the flow of filtrate towards the caudal exit^3,4. This simple pronephric structure maintains zebrafish homeostasis through several weeks of larval growth where they eventually develop into a more complex mesonephros structure²¹. However, the zebrafish never develops a metanephros²¹. Despite the zebrafish idiosyncrasies, the zebrafish nephron is segmented with gene expression profiles equal to that observed in mammals and thus offers an unrivalled in vivo model for nephrogenesis^3,22.

Routinely patients are tested for kidney function through a series of blood and urinary tests. Typically the blood is analyzed for dissolved salts, urea and creatinine. High levels of urea, creatinine and abnormal salt concentrations are indicative of problems with kidney function. Urinalysis using a colorimetric dipstick detects abnormal levels of protein, blood, pus, bacteria and sugar present in urine samples. Such tests normally require approximately 30 ml of urine or 5 - 10 ml of blood. It has been difficult to translate these types of assays to small in vivo model organisms, such as the zebrafish, mainly due to the impossible nature of collecting sufficient blood or urine to perform the assay. Here, we address the lack of appropriate zebrafish kidney function tests and describe an innovative technique for its study. By injecting a fluorescent dye into the blood stream we are able to monitor and individually quantify over time the filtration and excretion of fluorescent activity from the blood via the kidney. This method can be used to study kidney damage caused by disease, which we provide an example of.

Protocol

Ethics Statement: Animal maintenance, husbandry, and procedures are defined and controlled by the Animals (Scientific Procedures) Act 1986. All animal experimentation has been carried out under licenses granted by the Home Secretary (PIL No. 70/7892) in compliance with Biological Services Management Group and the Biological Services Ethical Committee, SGUL, London, UK. All efforts were made to reduce the number of animals used and to refine both procedures and husbandry in order to minimize suffering and enhance welfare.

1. Preparation of Instruments, Anesthetic, and Fluorescent Dye

1. Using a micropipette puller and borosilicate standard wall capillaries (without filaments) pull needles of appropriate length for microinjection (Figure 1A).
2. Make an agarose mould for orientation of embryos for easy injection into the pericardium (Figure 1B). Glue approximately ten glass microscope slides together to form a ‘staircase’ of offset slides. For best results, use a drop of rapid set epoxy resin glue in the center of each slide.
3. Cut out a section of approximately 78 mm in length halfway through two 10 ml plastic pipettes using a Bunsen burner heated scalpel, remove pipette ends as appropriate. Attach and glue (epoxy resin) pipette sections to the stacked glass slides to provide stability to allow the mould to dip into a 90 mm Petri dish. Make every effort to ensure the slide corners align perpendicular to the Petri dish floor. Allow glue time to set.
4. Cast the mould in a 2% agarose solution made in fish water (obtained from the aquarium). Pour agarose into a 90 mm Petri dish and place the mould on top of the open Petri dish, permitting the stacked slide edges to submerge at an angle under the agarose surface. Leave to set on the lab bench for 30 min.
5. Remove the slide cast and cover the slide-imprinted agarose with fresh fish water containing Tricaine anesthetic (see step 1.9) at a 1:25 ratio.
6. Make solutions of rhodamine dextran (RD) dye. Resuspend rhodamine B 10,000 MW labeled dextran in autoclaved ultrapure water to make a stock concentration of 50 mg/ml. For microinjection, further dilute the stock to a final concentration of 5 mg/ml in autoclaved ultrapure water.
   NOTE: Pigmented cells begin to differentiate in zebrafish from 24 hr post fertilization (hpf); these can obscure fluorescent markers during image acquisition.
7. Inhibit melanocyte formation by using N-Phenylthiourea (PTU), which blocks melanogenesis through inhibition of tyrosinase. Make a 0.003 % stock solution of PTU by dissolving PTU powder in aquarium water, heat solution at 60 °C to fully solubilize.
8. Incubate zebrafish embryos in methylene blue solution, a mild fungicide, to prevent fungal blooms and increase survival. Add 2 ml of methylene blue stock solution, containing 0.1% Methylene blue in ultrapure water, to 1 L of aquarium water and use as a standard embryo medium.
9. Make up a 15 mM stock concentration of Tricaine/ethyl 3-aminobenzoate methanesulfonate salt as instructed in ‘The Zebrafish Book’ ²³. Anesthetize the embryos and consequently immobilized them to perform the microinjection procedure.
10. After anesthetizing the embryos, orient them, for imaging by using the non-toxic and viscous properties of methylcellulose. To make a 200 ml preparation of 3% methylcellulose, chill 130 ml of water at -20 °C for 30 min and place on ice. Heat 70 ml of water to 80 °C in a glass beaker, add 6 g of methylcellulose, and agitate using a glass rod until all particles are wetted and evenly dispersed. Add the ice-cold water, mix, and allow the preparation to cool at 4 °C for 30 min before aliquoting into 50 ml tubes.
    NOTE: Lowering the temperature allows the methylcellulose to become soluble. The solution will become thicker as the powder hydrates. 3% methylcellulose can be stored without bacterial growth for short periods of a week at 4 °C or longer at -20 °C. Make sure the methylcellulose has reached RT before use.
11. To perform injections of fluorescent dye into the zebrafish use a standard microinjection set-up (Figure 1C). This consists of an air compressor connected to a pressure regulator system that feeds into a straight pipette holder for use with 1.0 outer diameter capillaries. The pipette holder should be housed within an MM33 compact 3-axis control micromanipulator secured to a steel base plate by a magnetic stand. Embryos can be visualized, manipulated and injected using a stereo dissecting microscope.

2. Zebrafish Husbandry and Pre-injection Treatment

1. Maintain zebrafish as previously described²³. Use an aquarium set-up that provides recirculating water supplied at a constant temperature of 28.5 °C, conditioned to pH 6.8 - 7.2 and conductivity of 450-550 μS with sodium bicarbonate and Instant Ocean Sea Salt, respectively. Use wildtype or transgenic zebrafish lines as appropriate to the experiment, maintaining a stocking density of 15 males to 15 females per 8 L tank. Set the fish facility photocycle to 14 hr of daylight between 9 am - 11 pm.
2. Zebrafish spawning commences at the beginning of the photocycle, when the lights turn on in the morning. To ensure maximum eggs can be collected without disturbing the fish, submerge breeding tanks (containing mesh inserts, available from zebrafish specialists) into wildtype stock tanks the evening before collection.
3. On the day of collection, allow 30 - 40 min for the fish to spawn, after which collect and rinse eggs using a tea strainer and fresh aquarium water. Deposit the cleaned eggs in a 90 mm Petri dish containing embryo medium and incubate at 28.5 °C.
4. Treat the embryos with PTU to inhibit melanogenesis. At 8 hpf, transfer viable embryos in minimal liquid to fresh petri dishes containing 1:100 PTU to embryo medium and further incubate at 28.5 °C until 72 hpf.
   NOTE: PTU can cause developmental defects if used at earlier stages so should be restricted to post 8 hpf stages, but can be treated as late as 24 hpf. Late addition of PTU does not fully block eye pigmentation but is generally successful and inhibiting trunk melanocyte formation.

3. Microinjection

NOTE: The pericardium encases the heart but is separated for protection and ease of cardiac movement by fluid within the pericardial cavity. The aim of this procedure is to inject RD into the pericardial cavity, this allows for rapid uptake of the dye to the vasculature system.

1. Load needles with 6 μl - diluted RD, using microloader tips and secure into the needle holder of the micromanipulator. Break the end of the needle using fine tipped forceps (Figure 1A). Move the RD solution to the tip of the needle by maximizing pulse duration to the minute setting, switch back to msec once complete.
2. Use a stage micrometer, the pressure regulator, and refinements to needle tip length (using forceps) to adjust the size of the expelled droplet to 100 μm in diameter, this equates to a 0.5 nl volume (Figure 2A).
   NOTE: When breaking the needle, be careful not to break too much off otherwise it will make calibrating the injection volume difficult. If necessary, further break the needle tip to increase the drop size however, maintain a needle thickness that permits entry into the pericardium without excessive bending or damage to the tissue.
3. Prior to injection, anesthetize the embryos in embryo medium containing Tricaine. Set up 2 x 35 mm Petri dishes containing 5 ml embryo medium, label one ‘Tricaine’ and the other ‘Recovery’.
4. Add 200 μl of stock Tricaine to the appropriately labeled dish. Once ready to inject, select an individual embryo at 72 hpf and transfer in minimal liquid to the Tricaine dish. Monitor the activity of the embryo, test the embryo is anesthetized and immobilized by gentle agitation using a truncated microloader tip.
5. Transfer the anesthetized embryo to the injection mould and orientate the embryo within an agarose trough so the left side is facing up, positioning the heart to the left of the field of view.
6. To inject the RD into the heart, pierce the pericardium with the needle and inject 1 nl of RD into the pericardial cavity of the anaesthetized embryo (Figure 2B, right panel). Withdraw the needle after injection. Transfer the injected embryo in minimal liquid to the ‘Recovery dish’ and monitor for 1 min. Transfer the individual embryo to a 24-well plate containing 1 ml fresh embryo medium (containing PTU) and label appropriately.
   NOTE: The pericardium is tough, however there is a notable weak point at the intersection where the pericardium meets the ventro-caudal pharyngeal arches and dorso-rostral yolk sac (Figure 2B arrowhead). The needle should be directed to this groove. When the needle is in place, a firm tap of a finger on top of the micromanipulator will facilitate entry into the pericardial cavity.
7. Repeat steps 3.2 - 3.6 for at least 10 embryos per experimental group, place each fish in a separate well and uniquely labelto permit individual experimental follow-ups. Incubate at 28.5 °C for 3 hr.

4. Imaging Acquisition

1. At 3 hr post injection (hpi) anesthetize embryos as previously described and transfer to a 35 mm Petri dish containing 3% methylcellulose. Gently push embryos into the methylcellulose and orientate so the lateral side can be imaged.
2. Acquire an image of the embryo under UV, using a filter for visualization of emitted light at 570 nm (Figure 2C). After image acquisition, allow the embryo to recover before replacing in the designated well. Acquire images for all injected embryos and further incubate at 28.5 °C.
   NOTE: In this protocol we used a fluorescent stereomicroscope with a TXR filter set, a DFC300FX camera and respective application software. Make a note of the exact acquisition settings for subsequent image acquisition.
3. At 24 hpi, acquire a second round of images as described above. Once all the images have been acquired, at both 3 hpi and 24 hpi, humanely dispose of the embryos or use for other experimental means e.g., immunohistochemistry.

5. Image Processing

1. Quantify fluorescent intensity of each injected embryo, at 3 hpi and 24 hpi, by analyzing images using NIH’s ImageJ software. To measure fluorescent intensity, open an image in ImageJ and specify a region of interest (roi) at 100 px² (Edit → selection → specify).
2. Position the heart in the center of the roi (Figure 2C), set measurements to include mean gray scale and area (Analyze → set measurements), perform measurement (Analyze → measure). Complete for each set of images, at 3 hpi and 24 hpi, per embryo and transfer average gray scale values to a spreadsheet for further processing.
   NOTE: We selected a fixed roi size of 100 px² as this encompasses individual hearts between embryos. The heart was selected to perform measurements due to its large size that enables a convenient location to measure fluorescent content of the blood prior to entering the kidney.
3. Perform statistical analysis using appropriate statistical software. Compare groups for statistical significance using a student’s t-test.

Results

Bardet-Biedl syndrome (BBS) is a rare heterogeneous ciliopathy that affects approximately 1:160,000 people worldwide¹⁶. Patients present with a number of associated problems including polycystic kidneys, subsequently patients frequently require kidney dialysis or transplantation²⁴. ESRF is the most common cause of death in BBS, with around 30% of patients developing CKD¹⁶. Currently, 20 non-related genes have been implicated in BBS with no published genotype-phenotype association. The BBS...

Discussion

Zebrafish offer a valuable tool to model human genetic disease, their use as a scientific instrument for in vivo research have enabled detailed studies of the genetic breakdown of many biological systems, including the kidney. Much is now understood about how the zebrafish kidney develops and functions. The striking similarities to human nephrogenesis and homology with disease causing genes²¹ has illustrated how zebrafish have become fundamental in understanding how defects in gene function ...

Materials

Name	Company	Catalog Number	Comments
P-97 SUTTER Flaming/Brown type micropipette puller	Intracel	P-97
borosilicate standard wall capillaries	Harvard Apparatus	30-0017
Glass microscope slides	VWR International	631-0109
Epoxy Resin Glue	Evo-Stik
Rhodamine B 10,000 MW labeled Dextran	Life technologies	D-1824
N-Phenylthiourea	Sigma-Aldrich	P7629
Methylene blue	Sigma-Aldrich	M9140
Ethyl 3-aminobenzoate methanesulfonate salt	Sigma-Aldrich	A5040
methylcellulose	Sigma-Aldrich	M0512
air compressor	Jun-Air	OF302-15
Picospritzer III	Parker Instruments	051-0500-900
compact 3-axis control micromanipulator	Marzhauser	MM33
Dissecting stereo microscope	Nikon	SMZ1000
microloader tips	Eppendorf	5242956003
Dumont #5 forceps	Sigma-Aldrich	F6521
stage micrometer	Pyser- SGI	02A00404