Preclinical Assessment of the Bioactivity of the Anticancer Coumarin OT48 by Spheroids, Colony Formation Assays, and Zebrafish Xenografts

Summary

Here, we present the preclinical screening of anticancer coumarins using 3D culture and zebrafish.

Abstract

In vitro and in vivo pre-clinical screening of novel therapeutic agents are an essential tool in cancer drug discovery. Although human cancer cell lines respond to therapeutic compounds in 2D (dimensional) monolayer cell cultures, 3D culture systems were developed to understand the efficacy of drugs in more physiologically relevant models. In recent years, a paradigm shift was observed in pre-clinical research to validate the potency of new molecules in 3D culture systems, more precisely mimicking the tumor microenvironment. These systems characterize the disease state in a more physiologically relevant manner and help to gain better mechanistic insight and understanding of the pharmacological potency of a given molecule. Moreover, with the current trend in improving in vivo cancer models, zebrafish has emerged as an important vertebrate model to assess in vivo tumor formation and study the effect of therapeutic agents. Here, we investigated the therapeutic efficacy of hydroxycoumarin OT48 alone or in combination with BH3 mimetics in lung cancer cell line A549 by using three different 3D culture systems including colony formation assays (CFA), spheroid formation assay (SFA) and in vivo zebrafish xenografts.

Introduction

Cancer is caused by cellular mutations and as a consequence biochemical signaling pathways are disrupted triggering uncontrolled cell division and resistance to cell death. Tumors interfere with physiological functions of digestive, nervous, circulatory systems and subsequently neighboring tissues¹. Despite extensive research efforts, cancer remains the most prevalent life-threatening disease in the world². Precision medicine has been recognized as the foundation of future cancer therapeutics. New molecular entities are tested routinely in combination with existing drugs to improve clinical outcome.

However, one of the significant limitations associated with the development of new efficient targeted therapies is the failure of commonly used assays to simulate the exact biological outcome of drug exposure³. Cancer drug discovery still mostly relies on testing the efficacy of therapeutic agents in cancer cell lines cultured in 2D monolayer cultures, which are difficult to validate in clinical trials⁴. Therefore, there is a growing interest to develop better cancer models that better mimic the native features of tumors in vivo⁵. In recent years, an increasing interest in 3D culture models resulted in the development of improved methodologies to produce 3D tumor models⁵.

Here, we present an approach with three different 3D cell culture techniques allowing to improve the understanding of the potency of the hydroxycoumarin OT48⁶ in combination with BH3 mimetics before more in depth in vivo assays. Our method consists of combining colony and SFAs with an in vivo tumor formation test based on a zebrafish model to further validate the efficacy of the combination of OT48 and BH3 mimetics in lung cancer cells and monitor cancer progression in a living organism.

Colony formation assays are routinely used to assess efficacy of anticancer agents for both solid as well as hematopoietic cancers. The assay determines the ability of a cell to proliferate indefinitely and form colonies⁷. The effect of an anticancer agent on the colony forming ability of cells is determined by decrease of the number and/or size of the colonies.

Spheroids represent in vitro tumor models and serve as a low-cost screening platform for anticancer agents. Spheroids are aggregates of cells growing in suspension or embedded in a 3D matrix. This approach is widely used for drug screening and studies of tumor growth, proliferation and immune interaction⁸.

To fully understand the properties of a new drug, it is essential to conduct in vivo experiments on rodents. However, this conventional method is expensive and time consuming. In recent years, zebrafish (Danio rerio) became a widely studied laboratory organism that is cheaper and faster to raise. Tumors developed in the zebrafish represent a 3D cell culture approach but within the in vivo setting of a vertebrate⁹.

Altogether, we use here three different 3D culture approaches including CFAs, SFAs and zebrafish in vivo tumor formation to demonstrate the anticancer capacity of hydroxycoumarin OT48 in a lung cancer A549 cell model in combination with BH3 mimetics.

Protocol

1. Colony Formation Assays

1. Culture A549 cells at a concentration of 20,000 cells/cm² in 15 mL of RPMI1640 cell culture medium supplemented with 10% FBS (Fetal Bovine Serum) and 1% antibiotics in a 75 cm² flask in a CO₂ incubator at 37 °C and 5% CO₂.
2. On the day of the experiment, determine the cell concentration by using a hemocytometer. Collect 50,000 cells by centrifugation at 400 x g for 7 min in a 1.5 mL microcentrifuge tube and re-suspend cells in 100 µL of 1x sterile PBS (Phosphate Buffered Saline) in 1.5 mL tubes.
3. Dispense 1.1 mL of semi-solid methylcellulose-based medium (MCBM) in 15 mL tubes with a multipipette. Prepare one tube for each condition.
4. Add 110 µL of FBS to 1.1 mL of MCBM using a P200 micropipette.
5. Seeds cells at 1,000 cells/mL. Collect 2.4 µL of cell suspension from the stock solution (50,000 cells in 100 µL of 1x PBS) using a P2 micropipette and add to 1.1 mL of MCBM supplemented with 10% FBS.
6. After adding the cells, vortex the tubes for 1 min, holding them vertically at the highest speed to mix MCBM and cells well.
7. Add test compounds (OT48 alone or in combination with A1210477). Prepare a separate tube as a control for the solvent used (here dimethyl sulfoxide (DMSO)). Depending on the concentration of the compounds and the volume added for each condition, the solvent control will include the highest concentration of solvent used for the dilutions of the test compound, to assess for adverse effects caused by the solvent.
8. Vortex tubes for 1 minute.
9. For each assay, add 1 mL of the mixture with a P1000 micropipette to the center well of a 12-well cell culture plate.
10. Fill empty wells with 1 mL of sterile water or 1x PBS to stabilize humidity.
11. Incubate culture plates for 10 days in an incubator at 37 °C and 5% CO₂.
12. After 10 days of incubation, add 200 µL of an MTT (methylthiazolyldiphenyl-tetrazolium bromide) stock solution (5 mg/mL) to each well to reach a final concentration of 1 mg/mL.
13. Incubate 10 min in an incubator at 37 °C and 5% CO₂. Viable colonies will turn violet.
14. Capture the image using a digital camera using the white background plate (LAS white dia tray). Use the following settings: Method, digitize; Exposure type, precision; Exposure time, manual, 1 second; Sensitivity/resolution, high resolution. Save the image in tiff format.
15. Quantify viable colonies by using ImageJ software. Select menu "Image | Type | 8 bit". Select menu "Adjust | Threshold". Set threshold to control and keep constant for all conditions; Select menu "Analyze | Analyze Particles". Save data and analyze with a statistics software for graphical representation.

2. Spheroid Formation Assay

1. Culture A549 cells at a concentration of 20,000 cells/cm² in 75 cm² flasks with 15 mL of RPMI 1640 medium supplemented with 10% FBS and 1% antibiotics.
2. On the day of the experiment, prepare a 96 well U-bottom plate.
3. Plate 10,000 cells into a well which already contains the compound of interest (here 50 µM of OT48 and/or 20 µM of A1210477). Adjust the final volume to 100 µL of cell culture medium. The number of cells that form uniform spheroids with an intact outer boundary is considered adequate to form spheroids.
4. Incubate for 3 days in an incubator at 37 °C and at 5% CO₂.
5. After 3 days of incubation, capture images of the spheroids using a light microscope with 4x magnification.

3. Zebrafish Xenograft Assay

NOTE: This technical approach is visualized as a schematic (Figure 1).

1. Preparation of stock reagents
   1. Prepare 1 L of 30x Danieau’s solution: 1740 mM NaCl, 21 mM KCl, 12 mM MgSO₄∙7H₂O, 18 mM Ca(NO₃)₂, and 150 mM HEPES. Adjust to the pH of the buffer to 7.6 using a pH meter.
   2. Prepare 1% (50x) tricaine solution: Dissolve 20 mg of ethyl 3-aminobenzoate methanesulfonate (tricaine) in 2 mL of distilled water.
   3. Prepare 1% phenol Red-PBS solution: Add 2 µL of Phenol Red sodium salt solution to 198 µL of sterilized PBS solution in a 1.5 µL tube.
   4. Prepare 3% methylcellulose: Add 3 g of methylcellulose to 100 mL of 1x Danieau’s solution.
2. Zebrafish egg production and incubation
   1. Separate one female and one male zebrafish in a partition tank filled with UV-sterilized and filtered tap water at 28.5 °C in the dark. After 24 h of separation, mix fish of both genders to initiate mating. Transfer fertilized eggs from the mating tank to a Petri dish containing 5 mL of fresh Danieau’s solution.
   2. Wash eggs three times with 5 mL of Danieau’s solution. For the washing, carefully aspirate the eggs with a pipette and transfer to 5 mL of fresh solution. Incubate for 8 h at 28.5 °C.
      1. After 8 h of incubation in Danieau's solution, change to Danieau's solution containing 0.03% 1-phenyl-2-thiourea (PTU) to inhibit pigmentation. Sort out opaque eggs (unfertilized or containing undeveloped embryos) to prevent contamination.
3. Embryo dechorionation
   1. 24 h post fertilization (hpf), dechorionate zebrafish embryos using sharp forceps. Incubate hatching embryos in Danieau’s solution with 0.03% PTU at 28.5 °C until 48 hpf.
4. Compound-treated cell preparation
   1. Seed A549 cells at 20,000 cells/cm² in 25 cm² culture flasks. After 24 h of seeding, add compounds (here OT48 at 50 µM and and/or A1210477 at 20 µM) for 24 h in an incubator at 37 °C and 5% CO₂. Set up the treatment time for each compound to maintain the viability of the cells but to commit them towards cell death. This time point needs to be individually set up based on cell viability, morphology and molecular markers.
   2. 2 h before the end of the treatment, stain cells with 4 µM of fluorescent cell tracker dye CM-Dil at 37 °C and 5% CO₂. After 2 h of incubation, trypsinize cells with 0.05% trypsin-EDTA, and dilute 10⁶ cells in 50 µL of phenol Red-PBS solution prior to injection.
5. Micro-injection of cancer cells for xenograft formation
   1. Anesthetize zebrafish in a 0.02% tricaine solution for 5 min until they settle down on an agar plate.
   2. Pull a 1.0 mm (outside diameter (OD) glass capillary) by a micropipette puller (Program settings: P: 300, Heat: 260, Pull: 60, VEL: 50, and Time: 200). Cut the microcapillary with a syringe to produce a sharp edge. Load microcapillaries with 20 µL of cell/phenol Red-PBS solution. Set injection pressure and time to dispense 2 nL per injection.
   3. Inject 100–200 cells into the yolk sac by injecting 6 to 10 nL via 3 to 5 injections. After injection, allow fish to recover for 10 to 30 min in 5 mL of fresh Danieau’s solution containing PTU solution. Dispatch fish in 24-well plates with 1 mL of Danieau's solution containing PTU solution are and incubate for 72 h at 28.5 °C.
   4. After 72 h of incubation, anesthetize fish in a 0.02% tricaine solution and immobilize on a glass slide with a drop of 3% methylcellulose. Take 5x pictures by fluorescence microscopy at a wavelength of 620 to 750 nm.
   5. Quantify the size of fluorescent tumors by ImageJ software. Select menu "Analyze | Measure". Save values corresponding to the fluorescent signal and analyze with a statistics software for graphical representation.

Results

In Figure 2, lung cancer cell line A549 was seeded in MCBM to form colonies after treatment with OT48 alone or in combination with BH3 mimetic A1210477 at the indicated concentrations. The results showed that the combination significantly reduced number, size and total surface area of the colonies after 10 days of incubation.

In Figure 3, A549 cells were treated with OT...

Discussion

The rates of colony formation obtained with MCBM depends on the cell type. Usually, for non-adherent cells, the number of colonies is much higher compared to adherent cells. We observed that A549 cells formed 30 to 40 colonies after 10 days. Previously we have reported for different leukemia cells that number of colonies is between 200 to 250⁹. Our results showed that OT48 alone did not produce a significant decrease of the number of colonies alone. However, in combination with BH3 mimetic A121047...

Materials

Name	Company	Catalog Number	Comments
Materials required for colony formation assays
A549	ATCC	CCL-185	37 C°
RPMI 1640	Lonza	30096	4 C°
FBS	Biowest	S1520-500	-20 C°
Penicillin-Streptomycin	Lonza	17-602E	-20 C°
Cell culture flask T75	SPL	70075	RT
PBS solution	Hyclone	SH30256.02	RT
1.5ml tube	Extragene	Tube-170-C	RT
15 ml tube	Hyundai Micro	H20015	RT
12 well plate	SPL	30012	RT
MethoCult	StemCell technologies	4230	-20 C°
Thiazolyl Blue Tetrazolium Bromide (MTT powder)	Sigma	M5622	4 C°
LAS4000	GE Healthcare Technologies		RT
Materials required for spheroid formation assay
A549	ATCC	CCL-185	37 C°
RPMI 1640	Lonza	30096	4 C°
FBS	Biowest	S1520-500	-20 C°
Penicillin-streptomycin	Lonza	17-602E	-20 C°
Cell culture flask T75	SPL	70075	RT
PBS solution	Hyclone	SH30256.02	RT
Trypsin-EDTA	Gibco	25-300-054	4 C°
Corning costar ultra low attachemnt 96 well plate	Corning	3474	RT
Microscopy	Nikon	Eclipse TS100	RT
Materials required for zebrafish xenografts
A549	ATCC	CCL-185	37 C°
RPMI 1640	Lonza	30096	4 C°
FBS	Biowest	S1520-500	-20 C°
Penicillin-streptomycin	Lonza	17-602E	-20 C°
Cell culture flask T25	SPL	70025	RT
Cell culture flask T75	SPL	70075	RT
Cell culture flask T175	SPL	71175	RT
1.5ml tube	Extragene	Tube-170-C	RT
24 well plate	SPL	30024	RT
Petridish	SPL	10100	RT
PBS solution	Hyclone	SH30256.02	RT
Trypsin-EDTA	Gibco	25-300-054	4 C°
Sodium Chloride	Sigma-Aldrich	71382	RT
Potassium chloride (KCL)	Sigma-Aldrich	P9541	RT
Magnesium sulfate heptahydrate (MgSO4.7H2O)	Sigma-Aldrich	M2773	RT
Calcium nitrate tetrahydrate (Ca(NO3)2)	Sigma-Aldrich	C1396	RT
HEPES solution	Sigma-Aldrich	H0887	RT
Ethyl 3-aminobenzoate methanesulfonate (Tricaine)	Sigma-Aldrich	E10521	RT
Phenol Red solution	Sigma-Aldrich	P0290	RT
Methylcellulose	Sigma-Aldrich	M0512	RT
1-phenyl-2-thiourea (PTU)	Sigma-Aldrich	P7629	RT
CM-Dil dye	Invitrogen	C7001	-20 C°
Glass capillary	World Precision Instruments	TW 100F-4	RT
Micropipette puller	Shutter instrument, USA	P-97	RT
Micro injector	World Precision Instruments	PV820	RT
Syringe	KOVAX	1ml	RT
Micro loader	Eppendorf	5242956003	RT
Glass slide	Marienfeld	HSU-1000612	RT
Fluorescence microscopy	Leica	DE/DM 5000B	RT