Name: simultaneous electrical and mechanical stimulation to enhance cells' cardiomyogenic potential
Uploaded: 2019-01-18T14:00:00
Description: Watch this Scientific Journal Video about Simultaneous Electrical and Mechanical Stimulation to Enhance Cells' Cardiomyogenic Potential at JoVE.com

The authors want to thank the members of the ICREC Research Program (IGTP, Badalona) and the Electronic and Biomedical Instrumentation Group (UPC, Barcelona), especially Prof. J. Rosell-Ferrer. In addition, the authors acknowledge STEM CELLS Translational Medicine journal and AlphaMed Press for permitting the adaptation of previously published figures (Lluci&#224;-Valldeperas, et al.30). The development of this prototype and the design of the protocol were supported by Ministerio de Educaci&#243;n y Ciencia (SAF 2008-05144), Ministerio de Econom&#237;a y Competitividad (SAF 2014-59892), the European Commission 7th Framework Programme (RECATABI, NMP3-SL-2009-229239), Fundaci&#243; La Marat&#243; de TV3 (080330, 201516, 201502), and Fundaci&#243;n para la Innovaci&#243;n y la Prospectiva en Salud en Espa&#241;a (FIPSE; 06-00001396-15).

This study uses human cardiac ATDPCs from patient samples. Their use has been approved by the local ethics committee, and all patients gave informed consent. The study protocol conforms to the principles outlined in the Declaration of Helsinki.
1. Preparations
<ol>
	<li>Autoclave two tweezers, 12 platinum PTFE electrodes for electrical stimulation, and some paper towels, at 121 &#176;C for 20 min.</li>
	<li>Sterilize 12 PDMS custom-made constructs (Figure 1</stro...

Electromechanical stimulation appears to be a safe alternative for preparing cells for a hostile cardiac environment and enhancing their cardiac commitment. Here, a protocol described for cardiac progenitor cells increased the expression of main cardiac markers and was reported to be beneficial for their next implantation on infarcted murine myocardium30. In general, electromechanically stimulated cardiac ATDPCs increased the expression of genes related to early, structural, and calcium regulation...

Heart function is based on the coupling of electrical excitation and mechanical contraction. Briefly, cardiomyocyte intercellular junctions permit electrical signal propagation to produce almost synchronous contractions of the heart that pump blood systemically and through the pulmonary system. Cardiac cells, thus, undergo both electrical and mechanical forces that regulate gene expression and cellular function. Accordingly, many groups have attempted to develop culture platforms that mimic the cardiac physiological environment to understand the role of mechanical and electrical stimulation on cardiac development, function, and maturation. In vitro electrical and mechanical stimulations individually have been applied extensively in cardiac tissue engineering to enhance functional properties, increase cell maturation, or improve cell-cell coupling and calcium handling1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21. Nevertheless, synchronous electromechanical conditioning remains unexploited because of the challenge of developing a stimulator and protocol, and because of the mandatory optimization22.
Preliminary work addressed electromechanical stimulation as a combination of electrical stimulation and media perfusion; however, the flow does not involve the strain-based deformation typical of ventricular filling23,24,25. Later, more physiological approaches combined electrical stimuli with physical deformation or stretch to mimic the isovolumetric contraction26,27,28,29,30,31. Feng et al. described the first demonstration of electromechanical stimulation in 2005, reporting enhanced cardiomyocyte size and contractile properties26. Wang et al. pretreated mesenchymal stem cells with 5-azacytidine and applied simultaneous electrical and mechanical conditioning, improving recellularization, cell viability, cardiac differentiation, and tissue remodeling27. Since those publications, more groups have reported on electromechanical stimulation of cell monolayers or engineered tissues (e.g., Black28, Vunjak-Novakovic29,31, and our group30) with the first conditioned cells tested in vivo30. Briefly, Morgan and Black tested several combinations of electrical and mechanical stimuli, reporting that the timing between stimulations was crucial because delayed combined electromechanical stimulation yielded the best results28. Next, Godier-Furn&#233;mont and collaborators optimized an electromechanical stimulation protocol for engineered heart muscle constructs from neonatal rat heart cells and achieved, for the first time, a positive force-frequency relationship29. Afterward, our group reported that electromechanically preconditioned cells increased the expression of main cardiac markers in vitro and broad beneficial effects in vivo, such as improved cardiac function or increased vessel density in the infarct border region30. The most recent publication demonstrated that cardiac tissues from stem-cell-derived cardiomyocytes subjected to electromechanical conditioning reached a maturation level closer to human adult cardiac structure and function31. Additionally, alternative three-dimensional stimulation platforms comprise electroactive scaffolds that provide electrical, mechanical, and topographical cues to the cells attached32. Moreover, mechanical deformation (cell monolayer stretching and compression) can also be induced with stretchable electrodes mimicking normal physiological conditions, as well as extreme conditions33.
Therefore, the rationale is that in vitro electromechanical stimuli based on physiological conditions could enhance the cardiomyogenic potential of a cell. Indeed, this stimulation could benefit further integrations of therapeutic cells into the myocardium in a clinical scenario or increase tissue maturation for drug-screening applications.
In addition, we isolated and characterized a population of human adipose tissue-derived progenitor cells of cardiac origin (cardiac ATDPCs)34. These cells are located in the epicardial fat. These cells display beneficial histopathological and functional effects in the treatment of myocardial infarction and also maintain cardiac and endothelial differentiation potential.30,35. We hypothesized that these benefits would increase after biophysical stimulation.
Consequently, we developed a device and a stimulation regime for the cell population of interest and investigated the effects. This electromechanical protocol is a new strategy to induce active cell stretching in a sterile manner and noninvasively compared to previous publications36, in combination with electric field stimulation. The technique reported here explains in detail the device and method used for the electrical, mechanical, and electromechanical stimulation of cells.
This device can provide both electrical and mechanical stimulation, independently or simultaneously. The stimulation is performed with a noninvasive and aseptic novel approach that includes presterilized cell support, electrodes placed inside a standard culture plate, and a platform that induces the mechanical and electrical forces (Figure 1).
The platform can hold up to six culture plates and consists of a sandwich structure of laser-cut poly(methyl methacrylate) and printed circuit-board pieces. The platform prototype relies on a combination of a monophasic programmable computer-controlled electrical stimulator, a printed circuit board for the robust connection of the electrodes, and six 10 mm x 10 mm x 5 mm nickel-plated neodymium-fixed magnets placed near one side of the culture plates. There is also an aluminum bar with six driving magnets (same model) placed in front of the other side of the culture plates and moved with a linear servomotor. The motor is driven by a motor controller, operated through an RS-232 port by commercial software (see the Table of Materials). Through the user interface and programmable stimulator, it is possible to program the electrical intensity, the pulse duration and frequency, the frequency of mechanical stimulation, its duty cycle, the number of pulses, the pulse amplitude (magnet excursion), and the slope.
<img alt="Figure 1" class="xfigimg" src="/files/ftp_upload/58934/58934fig1.jpg" /> 
Figure 1: Electromechanical stimulator. (A) PDMS construct used for the cell conditioning. (B) Drawing of the PDMS construct, including electrodes and magnets. (C) Detail of the printed circuit board (platform) used to perform the electromechanical conditioning. This panel has been modified from Lluci&#224;-Valldeperas et al.30. (D) Picture of the electromechanical stimulation platform and user interface (computer). <a href="https://www.jove.com/files/ftp_upload/58934/58934fig1large.jpg" target="_blank">Please click here to view a larger version of this figure.</a>
Both the stimulator and the method for electromechanical conditioning are fully described in two international patents, WO-2013185818-A137 and WO-2017125159-A138.
The biocompatible silicone constructs designed to provide structural support to cells, electrodes, and magnets have been described previously10,21. Briefly, they consist of polydimethylsiloxane (PDMS), molded and cured at room temperature, with a Young&#39;s modulus of 1.3 MPa, close to physiological levels. The construct contains a cell culture pool in a flexible area (10 mm x 10 mm x 2 mm), two inner transverse slots to hold the electrodes, and two embedded 6 mm x 2 mm x 4 mm nickel-plated neodymium magnets. The electrodes are built with 0.2 mm platinum wire twisted around a 2 mm x 3 mm x 12 mm polytetrafluoroethylene (PTFE) core bar (21 cm per electrode, approximately 23 turns) and placed at opposite sides of the flexible area to create an electric field for inducing electrical stimulation. Mechanical stretching is achieved through magnetic attraction between magnets embedded in the support and external magnets placed next to the culture plate and on the moving aluminum arm. In this way, the cell support can be extended without breaking the sterile barrier. This approach is suitable for a cell monolayer but could be adapted to three-dimensional constructs, as well.
In addition, a regular pattern could be imprinted where the cells are seeded, using a ruled diffraction grating (1,250 grooves/mm). The direct visualization of cells cultured on the PDMS construct under brightfield and fluorescent microscopes is possible because of its transparency and 0.5 mm thickness. In the current case, the PDMS culture pool has a vertical surface pattern, perpendicular to the stretching force, to align the cells perpendicularly to the electric field, which minimizes the electric field gradient across the cell.
Figure 1 shows a detailed description of the construct and device used for the stimulation. The PDMS construct and characteristics are optimized for cell stretching (Figure 1A,B). The stimulator is developed and validated for the effective application of the desired electrical and mechanical stimulation to cells attached to the PDMS construct. This process includes ensuring good connectivity and user operability through the software interface (Figure 1C,D).
The procedure for cell stimulation using this custom-made device is described in the protocol section.

<table >
	<tbody>
		<tr >
			<td >Stimulator</td>
			<td ></td>
			<td ></td>
			<td ></td>
		</tr>
		<tr >
			<td >nickel plated neodymium magnets</td>
			<td >Supermagnete</td>
			<td >Q-10-10-05-N</td>
			<td></td>
		</tr>
		<tr >
			<td >nickel-plated neodymium magnets</td>
			<td >Supermagnete</td>
			<td >Q-06-04-02-HN</td>
			<td></td>
		</tr>
		<tr >
			<td >polydimethylsiloxane (PDMS) SYLGAR 184 Silicone Elastomer Kit</td>
			<td >Dow Corning Corp</td>
			<td >184</td>
			<td></td>
		</tr>
		<tr >
			<td >ruled diffraction grating (1250 grooves/mm)</td>
			<td >Newport</td>
			<td >05RG150-1250-2</td>
			<td></td>
		</tr>
		<tr >
			<td >Motor controller</td>
			<td >Faulhaber</td>
			<td>MCLM-3006-S</td>
			<td></td>
		</tr>
		<tr >
			<td >Labview</td>
			<td >National Instruments</td>
			<td></td>
			<td></td>
		</tr>
		<tr >
			<td >Cell culture</td>
			<td ></td>
			<td ></td>
			<td></td>
		</tr>
		<tr >
			<td >phosphate-buffered saline (PBS)</td>
			<td >Gibco</td>
			<td >70013-065</td>
			<td></td>
		</tr>
		<tr >
			<td >0.05% trypsin-EDTA</td>
			<td >Gibco</td>
			<td >25300-120</td>
			<td></td>
		</tr>
		<tr >
			<td >35 mm cell culture dish</td>
			<td>BD Falcon</td>
			<td>45353001</td>
			<td></td>
		</tr>
		<tr >
			<td >fetal bovine serum (FBS)</td>
			<td >Gibco</td>
			<td>10270-106</td>
			<td></td>
		</tr>
		<tr >
			<td >L-Glutamine 200 mM, 100x</td>
			<td >Gibco</td>
			<td >25030-024</td>
			<td></td>
		</tr>
		<tr >
			<td >Penicilina/Streptomicine, 10.000 U/mL</td>
			<td >Gibco</td>
			<td>15140-122</td>
			<td></td>
		</tr>
		<tr >
			<td >Minimum essential medium eagle (alfa-MEM)</td>
			<td >Sigma</td>
			<td>M4526-24x500ML</td>
			<td></td>
		</tr>
		<tr >
			<td >Protein &amp; RNA analyses</td>
			<td ></td>
			<td></td>
			<td></td>
		</tr>
		<tr >
			<td >protease inhibitor cocktail</td>
			<td >Sigma</td>
			<td >P8340</td>
			<td></td>
		</tr>
		<tr >
			<td >QIAzol Lysis Reagent</td>
			<td >Qiagen</td>
			<td>79306</td>
			<td></td>
		</tr>
		<tr >
			<td >AllPrep RNA/Protein Kit</td>
			<td >Qiagen</td>
			<td>50980404</td>
			<td></td>
		</tr>
		<tr >
			<td >Rneasy mini kit</td>
			<td >Qiagen</td>
			<td>74104</td>
			<td></td>
		</tr>
		<tr >
			<td >iTaq Universal Probes One-Step Kit</td>
			<td>Bio-Rad Laboratories</td>
			<td >172-5140</td>
			<td></td>
		</tr>
		<tr >
			<td >Random hexamers</td>
			<td >Qiagen</td>
			<td >79236</td>
			<td></td>
		</tr>
		<tr >
			<td >TaqMan PreAmp MasterMix 2X</td>
			<td>Applied Biosystems</td>
			<td >4391128</td>
			<td></td>
		</tr>
		<tr >
			<td >TaqMan Universal PCR MasterMix</td>
			<td>Applied Biosystems</td>
			<td >4324018</td>
			<td></td>
		</tr>
		<tr >
			<td >Immunostaining</td>
			<td ></td>
			<td ></td>
			<td></td>
		</tr>
		<tr >
			<td >10% formalin</td>
			<td >Sigma</td>
			<td >HT-501128-4L</td>
			<td></td>
		</tr>
		<tr >
			<td >horse serum</td>
			<td >Sigma</td>
			<td >H1138</td>
			<td></td>
		</tr>
		<tr >
			<td >Triton X-100</td>
			<td >Sigma</td>
			<td >X100-500ML</td>
			<td></td>
		</tr>
		<tr >
			<td >Bovine Serum Albumina (BSA)</td>
			<td >Sigma</td>
			<td >A7906-100G</td>
			<td></td>
		</tr>
		<tr >
			<td >PARAFILM</td>
			<td >Sigma</td>
			<td >P6543</td>
			<td></td>
		</tr>
		<tr >
			<td >4',6-diamidino-2-phenylindole (DAPI)</td>
			<td >Sigma</td>
			<td >D9542</td>
			<td></td>
		</tr>
		<tr >
			<td >Phalloidin Alexa 568</td>
			<td >Invitrogen</td>
			<td >A12380</td>
			<td></td>
		</tr>
		<tr >
			<td >sodium azide</td>
			<td >Sigma</td>
			<td >S8032-100g</td>
			<td></td>
		</tr>
		<tr >
			<td >Hoechst 33342</td>
			<td >Sigma</td>
			<td >14533</td>
			<td></td>
		</tr>
		<tr >
			<td >Connexin-43 rabbit primary antibody</td>
			<td >Sigma</td>
			<td>C6219 lot#061M4823</td>
			<td></td>
		</tr>
		<tr >
			<td >sarcomeric &#945;-actinin mouse primary antibody</td>
			<td >Sigma</td>
			<td>A7811 lot#080M4864</td>
			<td></td>
		</tr>
		<tr >
			<td >GATA-4 goat primary antibody</td>
			<td>R&amp;D</td>
			<td>AF2606 VAZ0515101</td>
			<td></td>
		</tr>
		<tr >
			<td >MEF2 rabbit primary antibody</td>
			<td>Santa Cruz</td>
			<td>sc-313 lot#E0611</td>
			<td></td>
		</tr>
		<tr >
			<td >SERCA2 goat primary antibody</td>
			<td>Santa Cruz</td>
			<td>sc-8095 lot#D2709</td>
			<td></td>
		</tr>
		<tr >
			<td >Cy3 secondary antibody</td>
			<td>Jackson ImmunoResearch</td>
			<td >711-165-152</td>
			<td></td>
		</tr>
		<tr >
			<td >Cy3 secondary antibody</td>
			<td>Jackson ImmunoResearch</td>
			<td >715-165-151</td>
			<td></td>
		</tr>
		<tr >
			<td >Cy3 secondary antibody</td>
			<td>Jackson ImmunoResearch</td>
			<td >712-165-150</td>
			<td></td>
		</tr>
		<tr >
			<td >Cy2 secondary antibody</td>
			<td>Jackson ImmunoResearch</td>
			<td >715-225-150</td>
			<td></td>
		</tr>
		<tr >
			<td >Cy2 secondary antibody</td>
			<td>Jackson ImmunoResearch</td>
			<td >711-225-152</td>
			<td></td>
		</tr>
		<tr >
			<td >Cy2 secondary antibody</td>
			<td>Jackson ImmunoResearch</td>
			<td >705-225-147</td>
			<td></td>
		</tr>
	</tbody>
</table>

simultaneous electrical and mechanical stimulation to enhance cells' cardiomyogenic potential

Cardiovascular diseases are the leading cause of death in developed countries. Consequently, the demand for effective cardiac cell therapies has motivated researchers in the stem cell and bioengineering fields to develop in vitro high-fidelity human myocardium for both basic research and clinical applications. However, the immature phenotype of cardiac cells is a limitation on obtaining tissues that functionally mimic the adult myocardium, which is mainly characterized by mechanical and electrical signals. Thus, the purpose of this protocol is to prepare and mature the target cell population through electromechanical stimulation, recapitulating physiological parameters. Cardiac tissue engineering is evolving toward more biological approaches, and strategies based on biophysical stimuli, thus, are gaining momentum. The device developed for this purpose is unique and allows individual or simultaneous electrical and mechanical stimulation, carefully characterized and validated. In addition, although the methodology has been optimized for this stimulator and a specific cell population, it can easily be adapted to other devices and cell lines. The results here offer evidence of the increased cardiac commitment of the cell population after electromechanical stimulation. Electromechanically stimulated cells show an increased expression of main cardiac markers, including early, structural, and calcium-regulating genes. This cell conditioning could be useful for further regenerative cell therapy, disease modeling, and high-throughput drug screening.

Figure 2 represents the general schema followed for the cell stimulation. Briefly, cells were seeded on the PDMS construct and subjected to electromechanical stimulation, with a media change performed twice a week. Nonstimulated cells were used as a control for the electromechanical conditioning. Additionally, we added an extra control to the experiment, and subcutaneous ATDPCs were used as a control for cardiac ATDPCs. Subcutaneous ATDPCs are obtained from s...

Watch this Scientific Journal Video about Simultaneous Electrical and Mechanical Stimulation to Enhance Cells' Cardiomyogenic Potential at JoVE.com

Simultaneous Electrical and Mechanical Stimulation to Enhance Cells' Cardiomyogenic Potential

Here we present a protocol for training a cell population using electrical and mechanical stimuli emulating cardiac physiology. This electromechanical stimulation enhances the cardiomyogenic potential of the treated cells and is a promising strategy for further cell therapy, disease modeling, and drug screening.

Cardiovascular diseases are the leading cause of death in developed countries. Consequently, the demand for effective cardiac cell therapies has motivated ...

Research

Education

JoVE Core

JoVE Journal

Physics

Bioengineering

Unit 1

Alternating-Current Circuits

SCIENTISTS IN ACTION

Separating Beads and Cells in Multi-channel Microfluidic Devices Using Dielectrophoresis and Laminar Flow

Microfluidic devices have advanced cell studies by providing a dynamic fluidic environment on the scale of the cell for studying, manipulating, sorting ...

Simultaneous Synthesis of Single-walled Carbon Nanotubes and Graphene in a Magnetically-enhanced Arc Plasma

Carbon nanostructures such as single-walled carbon nanotubes (SWCNT) and graphene attract a deluge of interest of scholars nowadays due to their very ...

Engineering Skeletal Muscle Tissues from Murine Myoblast Progenitor Cells and Application of Electrical Stimulation

Engineered muscle tissues can be used for several different purposes, which include the production of tissues for use as a disease model in vitro, e.g. to ...

Distinctive Capillary Action by Micro-channels in Bone-like Templates can Enhance Recruitment of Cells for Restoration of Large Bony Defect

Without an active, thriving cell population that is well-distributed and stably anchored to the inserted template, exceptional bone regeneration does not ...

Optical Control of Living Cells Electrical Activity by Conjugated Polymers

Hybrid interfaces between organic semiconductors and living tissues represent a new tool for in-vitro and in-vivo applications. In particular, conjugated ...

Cardiac Muscle-cell Based Actuator and Self-stabilizing Biorobot - PART 1

Biological machines often referred to as biorobots, are living cell- or tissue-based devices that are powered solely by the contractile activity of living ...

Cardiac Muscle Cell-based Actuator and Self-stabilizing Biorobot - Part 2

In recent years, hybrid devices that consist of a living cell or tissue component integrated with a synthetic mechanical backbone have been developed. ...

Gel-seq: A Method for Simultaneous Sequencing Library Preparation of DNA and RNA Using Hydrogel Matrices

The ability to amplify and sequence either DNA or RNA from small starting samples has only been achieved in the last five years. Unfortunately, the ...

Construction and Use of an Electrical Stimulation Chamber for Enhancing Osteogenic Differentiation in Mesenchymal Stem/Stromal Cells In Vitro

Mesenchymal stem/stromal cells (MSCs) have been used extensively to promote bone healing in tissue engineering approaches. Electrical stimulation (EStim) ...

Self-Assembly of Gamma-Modified Peptide Nucleic Acids into Complex Nanostructures in Organic Solvent Mixtures

Current strategies in DNA and RNA nanotechnology enable the self-assembly of a variety of nucleic acid nanostructures in aqueous or substantially hydrated ...