Name: mixed reality for education (mre) implementation and results in online classes for engineering
Uploaded: 2023-06-23T13:00:00
Description: Watch this Scientific Journal Video about Mixed Reality for Education MRE Implementation and Results in Online Classes for Engineering at JoVE.com

This study was sponsored by the Panamerican University Guadalajara campus. We thank the mechatronic engineering students for contributing to the experiment.

The protocol follows the guidelines of the Panamerican University ethics committee. The experiment was conducted with a total of 30 students, between 18 and 20 years old; eight students were female and 22 were male, and they all attended the Panamerican University in Guadalajara, Mexico (the second largest city in Mexico). All participants completed the informed consent process and provided written permission for photos to be taken and published during data collection. The only requirement was that the students needed to...

<ol>
	<li>The COVID-19 pandemic has changed education forever. This is how. World Economic Forum Available from: <a target="_blank" href="https://www.weforum.org/agenda/2020/04/coronavirus-education-gloabl-covid19-online-digital-learning/">https://www.weforum.org/agenda/2020/04/coronavirus-education-gloabl-covid19-online-digital-learning/</a> (2020)</li><li>How does virtual learning impact students in higher education. Brown Center Chalkboard Available from: <a target="_blank" href="https://www.brookings.edu/blog/brown-center-chalkboard/2021/08/13/how-does-virtual-learning-impact-students-in-hegher-education/">https://www.brookings.edu/blog/brown-center-chalkboard/2021/08/13/how-does-virtual-learning-impact-students-in-hegher-education/</a> (2021)</li><li>Loukatos, D., Androulidakis, N., Arvanitis, K. G., Peppas, K. P., Chondrogiannis, E. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Using+open+tools+to+transform+retired+equipment+into+powerful+engineering+education+instruments:+a+smart+Agri-IoT+control+example.">Using open tools to transform retired equipment into powerful engineering education instruments: a smart Agri-IoT control example.</a> Electronics. 11, 855 (2022).</li><li>Garlinska, M., Osial, M., Proniewska, K., Pregowska, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+influence+of+emerging+technologies+on+distance+education.">The influence of emerging technologies on distance education.</a> Electronics. 12 (7), 1550 (2023).</li><li>Parmaxi, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Virtual+reality+in+language+learning:+A+systematic+review+and+implications+for+research+and+practice.">Virtual reality in language learning: A systematic review and implications for research and practice.</a> Interactive Learning Environments. 31, 172-184 (2023).</li><li>Milgram, P., Kishino, F. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+taxonomy+of+mixed+reality+visual+displays.">A taxonomy of mixed reality visual displays.</a> IEICE Transactions on Information and Systems. 77 (12), 1321-1329 (1994).</li><li>Zaghloul, M. A. S., Hassan, A., Dallal, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Teaching+and+managing+remote+lab-based+courses.">Teaching and managing remote lab-based courses.</a> ASEE Annual Conference and Exposition, Conference Proceedings. , (2021).</li><li>Maas, M. J., Hughes, J. M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Virtual,+augmented+and+mixed+reality+in+K-12+education:+A+review+of+the+literature.">Virtual, augmented and mixed reality in K-12 education: A review of the literature.</a> Technology, Pedagogy and Education. 20 (2), 231-249 (2020).</li><li>Noah, N., Das, S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Exploring+evolution+of+augmented+and+virtual+reality+education+space+in+2020+through+systematic+literature+review.">Exploring evolution of augmented and virtual reality education space in 2020 through systematic literature review.</a> Computer Animation and Virtual Worlds. 32 (3-4), e2020 (2021).</li><li>Gerup, J., Soerensen, C. B., Dieckmann, P. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Augmented+reality+and+mixed+reality+for+healthcare+education+beyond+surgery:+an+integrative+review.">Augmented reality and mixed reality for healthcare education beyond surgery: an integrative review.</a> International Journal of Medical Education. 11, 1-18 (2020).</li><li>Sinou, N., Sinou, N., Filippou, D. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Virtual+reality+and+augmented+reality+in+anatomy+education+during+COVID-19+pandemic.">Virtual reality and augmented reality in anatomy education during COVID-19 pandemic.</a> Cureus. 15 (2), (2023).</li><li>Soliman, M., Pesyridis, A., Dalaymani-Zad, D., Gronfula, M., Kourmpetis, M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+application+of+virtual+reality+in+engineering+education.">The application of virtual reality in engineering education.</a> Applied Sciences. 11 (6), 2879 (2021).</li><li>Rojas-S&#225;nchez, M. A., Palos-S&#225;nchez, P. R., Folgado-Fern&#225;ndez, J. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Systematic+literature+review+and+bibliometric+analysis+on+virtual+reality+and+education.">Systematic literature review and bibliometric analysis on virtual reality and education.</a> Education and Information Technologies. 28, 155-192 (2023).</li><li>Brown, K. E., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+large-scale,+multiplayer+virtual+reality+deployment:+a+novel+approach+to+distance+education+in+human+anatomy.">A large-scale, multiplayer virtual reality deployment: a novel approach to distance education in human anatomy.</a> Medical Science Educator. , 1-13 (2023).</li><li>Birt, J., Stromberga, Z., Cowling, M., Moro, C. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Mobile+mixed+reality+for+experiential+learning+and+simulation+in+medical+and+health+sciences+education.">Mobile mixed reality for experiential learning and simulation in medical and health sciences education.</a> Informatics. 9 (2), 31 (2018).</li><li>Tang, Y. M., Au, K. M., Lau, H. C. W., Ho, G. T. S., Wu, C. H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Evaluating+the+effectiveness+of+learning+design+with+mixed+reality+(MR)+in+higher+education.">Evaluating the effectiveness of learning design with mixed reality (MR) in higher education.</a> Virtual Reality. 24 (4), 797-807 (2020).</li><li>Halabi, O. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Immersive+virtual+reality+to+enforce+teaching+in+engineering+education.">Immersive virtual reality to enforce teaching in engineering education.</a> Multimedia Tools and Applications. 79 (3-4), 2987-3004 (2020).</li><li>Borish, V. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Undergraduate+student+experiences+in+remote+lab+courses+during+the+COVID-19+pandemic.">Undergraduate student experiences in remote lab courses during the COVID-19 pandemic.</a> Physical Review Physics Education Research. 18 (2), 020105 (2022).</li><li>Trentsios, P., Wolf, M., Frerich, S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Remote+Lab+meets+Virtual+Reality-Enabling+immersive+access+to+high+tech+laboratories+from+afar.">Remote Lab meets Virtual Reality-Enabling immersive access to high tech laboratories from afar.</a> Procedia Manufacturing. 43, 25-31 (2020).</li><li>Jona, K., Roque, R., Skolnik, J., Uttal, D., Rapp, D. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Are+remote+labs+worth+the+cost?+Insights+from+a+study+of+student+perceptions+of+remote+labs.">Are remote labs worth the cost? Insights from a study of student perceptions of remote labs.</a> International Journal of Online Engineering. 7 (2), 48-53 (2011).</li><li>Lowe, D., De La Villefromoy, M., Jona, K., Yeoh, L. R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Remote+laboratories:+Uncovering+the+true+costs.">Remote laboratories: Uncovering the true costs.</a> 2012 9th International Conference on Remote Engineering and Virtual Instrumentation. IEEE. , 1-6 (2012).</li><li>Miles, D. T., Wells, W. G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Lab-in-a-box:+A+guide+for+remote+laboratory+instruction+in+an+instrumental+analysis+course.">Lab-in-a-box: A guide for remote laboratory instruction in an instrumental analysis course.</a> Journal of Chemical Education. 97 (9), 2971-2975 (2020).</li><li>Loukatos, D., Zoulias, E., Chondrogiannis, E., Arvanitis, K. G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+mixed+reality+approach+enriching+the+agricultural+engineering+education+paradigm,+against+the+COVID19+Constraints.">A mixed reality approach enriching the agricultural engineering education paradigm, against the COVID19 Constraints.</a> 2021 IEEE Global Engineering Education Conference (EDUCON). IEEE. , 1587-1592 (2021).</li><li>Guerrero-Osuna, H. A., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Implementation+of+a+MEIoT+weather+station+with+exogenous+disturbance+input.">Implementation of a MEIoT weather station with exogenous disturbance input.</a> Sensors. 21 (5), 1653 (2021).</li><li>. Unity Technologies Available from: <a target="_blank" href="https://unity.com/">https://unity.com/</a> (2023)</li><li>About AR Foundation. Unity Technologies Available from: <a target="_blank" href="https://docs.unity3d.com/Packages/com.unity.xr.arfoundation@4.1/manual/index.html">https://docs.unity3d.com/Packages/com.unity.xr.arfoundation@4.1/manual/index.html</a> (2020)</li><li>. Manomotion Available from: <a target="_blank" href="https://www.manomotion.com/">https://www.manomotion.com/</a> (2022)</li><li>Create immersive VR experiences. Alphabet Inc Available from: <a target="_blank" href="https://developers.google.com/cardboard">https://developers.google.com/cardboard</a> (2021)</li><li>Demand for online education is growing. Are providers ready. McKinsey &amp; Company Available from: <a target="_blank" href="https://www.mckinsey.com/industries/education/our-insights/demand-for-online-education-is-growing-are-providers-ready">https://www.mckinsey.com/industries/education/our-insights/demand-for-online-education-is-growing-are-providers-ready</a> (2022)</li><li>Vergara, D., Fern&#225;ndez-Arias, P., Extremera, J., D&#225;vila, L. P., Rubio, M. P. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Educational+trends+post+COVID-19+in+engineering:+Virtual+laboratories.">Educational trends post COVID-19 in engineering: Virtual laboratories.</a> Materials Today: Proceedings. 49, 155-160 (2022).</li><li>Wu, B., Yu, X., Gu, X. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Effectiveness+of+immersive+virtual+reality+using+head-mounted+displays+on+learning+performance:+A+meta-analysis.">Effectiveness of immersive virtual reality using head-mounted displays on learning performance: A meta-analysis.</a> British Journal of Educational Technology. 51 (6), 1991-2005 (2020).</li><li>Makarova, I., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+virtual+reality+lab+for+automotive+service+specialists:+a+knowledge+transfer+system+in+the+digital+age.">A virtual reality lab for automotive service specialists: a knowledge transfer system in the digital age.</a> Information. 14 (3), 163 (2023).</li><li>Cho, Y., Park, K. S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Designing+immersive+virtual+reality+simulation+for+environmental+science+education.">Designing immersive virtual reality simulation for environmental science education.</a> Electronics. 12 (2), 315 (2023).</li><li>Burov, O. Y., Pinchuk, O. P. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+meta-analysis+of+the+most+influential+factors+of+the+virtual+reality+in+education+for+the+health+and+efficiency+of+students'+activity.">A meta-analysis of the most influential factors of the virtual reality in education for the health and efficiency of students' activity.</a> Educational Technology Quarterly. 2023, 58-68 (2023).</li><li>Loetscher, T., Jurkovic, N. S., Michalski, S. C., Billinghurst, M., Lee, G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Online+platforms+for+remote+immersive+Virtual+Reality+testing:+an+emerging+tool+for+experimental+behavioral+research.">Online platforms for remote immersive Virtual Reality testing: an emerging tool for experimental behavioral research.</a> Multimodal Technologies and Interaction. 7 (3), 32 (2023).</li></ol>

The MRE system allows different scenarios for students to learn about electronic components or physics topics. An important point is the possibility of the teacher providing feedback. In this way, the students can know what they did wrong and why. With the MRE system developed, an experiment was carried out with 30 students, where 10 students did not use MRE, 10 used MRE, and finally another 10 used MRE and received feedback from the teacher. At the end of the classes, a general knowledge test was given to all the studen...

Technology has always been present in the education sector; profound changes have occurred in the devices used to teach classes. However, face-to-face classes remain the preferred option for students and teachers. When the pandemic came, it changed all sectors, and education was no exception. In 2018, before the pandemic, only 35% of students who studied a degree reported having taken at least one class online; that is, 65% of students completed their studies in person1. As of April 2020, by government order (Mexican), all public and private schools were prohibited from teaching face-to-face classes; for this reason, 100% of the students had to take distance classes. Universities were the first to act, using tools for video calling, preparing classes, homework management, etc. This makes sense, since people of university age (between 18 and 25 years old) are people who have been in contact with technology since birth.
Some classes can be fully adapted virtually; however, laboratory practices are complex to perform remotely, and students do not have the necessary material, which is often expensive. The impact that online classes have on the quality of knowledge is unclear, and some studies show that online courses generally yield worse student performance than in-person coursework2. But one thing is certain, not carrying out laboratory practices that bring students closer to what they will experience in the industry will negatively affect their professional performance. Therefore, the importance of real-scale experiences becomes necessary in the current teaching of engineering3,4,5. For these reasons, new technologies are being used to mitigate these problems. Among them are virtual reality (VR), augmented reality (AR), and mixed reality (MR). It is important to mention that VR is a technology that allows the creation of a totally immersive digital environment, whileAR overlays virtual objects in the real-world environment. On the other hand, MR does not just use virtual objects, but also anchors these objects to the real world, making it possible to interact with them. Thus, MR is a combination of VR and AR6. On the other hand, some organizations have also made efforts to develop remote laboratories, where real equipment exists but can be controlled remotely7.
The term MR dates to 1994; however, in the last 5 years, it has taken on special importance, thanks to large companies that have focused their efforts on developing environments, such as the Metaverse6. MR can be applied in different areas; two of the most common are training and education. Training has been one of the great drivers of MR; it is very expensive for a company to stop a production line to train new employees, or in dangerous environments, and it isn&#39;t easy to carry out training in the field. Education is not far behind; although face-to-face classes have changed very little, there are great efforts to incorporate MR into classes8,9. For education, there are professional careers where it is necessary to carry out laboratory practices to have complete training. Many existing studies and research are in medicine, with VR, AR, and MR playing a key role. Multiple papers show how MR surpasses traditional teaching methods in surgical and medical subjects, where the practice is a clear advantage for developing students10,11,12,13,14.
However, there is not the same amount of research on engineering issues. Normally in engineering careers, a student has theory classes complemented by practices. In this way, there are studies on MR and VR showing the benefits in engineering pedagogy12. However, some of these studies focus on analyzing the complexity of the environment and the tools used8,15. Tang et al. devised a study where students from different areas and with different knowledge used MR to improve their understanding of geometric analysis and creativity16. In a subsequent test, people who took their classes using MR finished faster, making it clear that MR positively affects learning16. Moreover, Halabi showed the use of VR tools in engineering education. Although it is not MR, it shows tools that can be used for teaching. It makes a real case study to show that it is possible to introduce VR in engineering classes17.
On the other hand, remote laboratories (RLs) are technological tools composed of software and hardware that allow students to remotely carry out their practices as if they were in a traditional laboratory. RLs are generally accessed through the internet, and are normally used when students are required to autonomously put into practice what they have learned as many times as they require18. However, with the arrival of COVID-19, its use has been to replace traditional laboratories and to be able to carry out practices during online classes18. As mentioned above, an RL needs a physical space (traditional laboratory) and elements that allow it to be controlled remotely. With the arrival of VR, laboratories have been modeled virtually, and through physical mechanisms, the elements of the laboratory can be controlled19. However, having an RL is very expensive, impeding many schools especially in developing countries. Some studies mention that costs can vary between $50,000 and $100,00020,21.
Moreover, since the pandemic began, changes have had to be made quickly; in the case of RLs, attempts were made to send kits to the homes of each student to replace the traditional laboratories. However, there was a cost problem, as studies showed that each kit cost around $70018,22. Nevertheless, the studies used expensive and difficult-to-obtain components. The pandemic affected education worldwide, and not many people could spend thousands of dollars to automate a lab or buy a kit. Most studies consider face-to-face classes and complement them with MR. However, in recent years, classes have been online due to COVID-19, and only some works show the improvement of virtual classes using MR and affordable devices23,24.
The research that exists so far is mainly focused on medicine, with little information on engineering. However, without a doubt, we believe that the greatest contribution and difference is that our experiment was carried out for 6 months and was compared with subjects with the same characteristics who did not use virtual models, whereas most previous works carried out short experiments to compare single technologies or procedures; they did not apply them over several months. Therefore, this paper shows the difference in learning that can be made using MR in a university subject.
For this reason, this work shows the development and results of an MR system to help carry out laboratory practices in universities focused on electronic engineering. It is important to mention that special emphasis is placed on keeping the cost of the device low, making it accessible to the general population. Three groups use different teaching methods, and an exam is conducted on the class topics. In this way, it is possible to obtain results on understanding the topics in distance education using MR.
The project explained in this work is called mixed reality for education (MRE) and is proposed as a platform where students use VR glasses with a smartphone (i.e., no special VR glasses are used). A workspace is created where students can interact with virtual environments and real objects simply by using their own hands, due to the use of virtual and real objects, a mixed reality system. This workspace consists of a base with an image where all the virtual objects are displayed and interacted with. The environment created focuses on conducting laboratory practices to show electronic components and physics for engineering careers. It is important to highlight the need to provide feedback to students. For this reason, MRE incorporates a feedback system where an administrator (normally the teacher) can see what is being done to rate the activity. In this way, feedback can be given on the work done by the student. Finally, the scope of this work is to check if there are advantages in using MR in online classes.
To achieve this, the experiment was carried out with three groups of students. Each group consisted of 10 students (30 students in total). The first group did not use MRE, only taking theory (online classes) on the momentum conservation principle and electronic components. The second group used MRE without feedback, and the third group used MRE with feedback from a teacher. It is important to mention that all students have the same school level; they are university students in the same semester and with the same career, studying mechatronics engineering. The experiment was applied in a single course called Introduction to Physics and Electronics, in the second semester of the degree; that is, the students had been in university for less than 1 year. Therefore, the topics covered in the class can be considered basic from an engineering point of view. The experiment was carried out on 30 students, as this was the number of students who enrolled in the class where the experiment was authorized. The selected class (Introduction to Physics and Electronics) had theory and laboratory practices, but due to the pandemic, only theory classes were being taught. The students were separated into three groups to see the impact that the practices have on general learning and if MR classes could be a substitute for face-to-face practices.

<table border="1" fo:keep-together.within-page="1" fo:keep-with-next.within-page="always">
	<tbody>
		<tr>
			<td>MRE application for Andorid</td>
			<td></td>
			<td></td>
			<td>The application was developed for the experiment, it was made by us. It is NOT public, and there are no plans for publication.</td>
		</tr>
		<tr>
			<td>Non-slip fabric (20 x 20 cm)</td>
			<td></td>
			<td></td>
			<td></td>
		</tr>
		<tr>
			<td>Printing of our base image</td>
			<td></td>
			<td></td>
			<td></td>
		</tr>
		<tr>
			<td>Self-adhesive paper (1 letter size sheet)</td>
			<td></td>
			<td></td>
			<td></td>
		</tr>
		<tr>
			<td>Virtual Reality Glasses</td>
			<td>Meta Quest 2</td>
			<td></td>
			<td>We use the Meta Quest 2, which is a virtual reality headset with two displays of 1832 x 1920 pixels per eye, with this headset you could play video games, or try simulators with a 360 view. Also, the headset has two controls, in which the virtual hands feel like your real ones and this is thanks to the hand-tracking technology. 
			https://www.meta.com/quest/products/quest-2/tech-specs/#tech-specs</td>
		</tr>
		<tr>
			<td>Wooden plate (20 x 20 cm)</td>
			<td></td>
			<td></td>
			<td></td>
		</tr>
	</tbody>
</table>

mixed reality for education (mre) implementation and results in online classes for engineering

The COVID-19 pandemic has changed many industries, empowering some sectors and causing many others to disappear. The education sector is not exempt from major changes; in some countries or cities, classes were taught 100% online for at least 1 year. However, some university careers need laboratory practices to complement learning, especially in engineering areas, and having only theoretical lessons online could affect their knowledge. For this reason, in this work, a mixed reality system called mixed reality for education (MRE) was developed to help students develop laboratory practices to complement online classes. An experiment was carried out with 30 students; 10 students did not use MRE, 10 used MRE, and 10 more used MRE with teacher feedback. With this, one can see the advantages of mixed reality in the education sector. The results show that using MRE helps to improve knowledge in engineering subjects; the students obtained qualifications with grades 10% to 20% better than those who did not use it. Above all, the results show the importance of feedback when using virtual reality systems.

This section shows the results obtained from the experiment. First, some details of how the experiment was carried out are explained, then the tests carried out on the students of the experiment are shown, and moreover, the results of the tests are presented. Finally, an analysis using one student of each group is described.
One of the biggest problems that the pandemic brought to engineering education was that it was not possible to carry out face-to-face laboratory practices, which has a dir...

Watch this Scientific Journal Video about Mixed Reality for Education MRE Implementation and Results in Online Classes for Engineering at JoVE.com

Mixed Reality for Education MRE Implementation and Results in Online Classes for Engineering

In this work, a mixed reality system called MRE was developed to help students develop laboratory practices complementing online classes. An experiment was carried out with 30 students; 10 students did not use MRE, 10 used MRE, and 10 more used MRE with teacher feedback.

Mixed Reality for Education (MRE) Implementation and Results in Online Classes for Engineering

The COVID-19 pandemic has changed many industries, empowering some sectors and causing many others to disappear. The education sector is not exempt from ...

This protocol examines how mixed reality can enhance online engineering education by overcoming remote lab limitations and costly VR equipment. It involves 30 students, emphasizing the advantages of MR and the importance of feedback. The main advantage of the mixed reality system is its ability to facilitate laboratory practices in online engineering classes, allowing students to compliment the theoretical learning.The study emphasized the importance of feedback. The mixed reality system can also be used in other application, such as training in industry where practical experience is essential, but difficult to provide in traditional settings. It offers a cost-effective solution, making it accessible to a wider population.User may face challenges in navigating the virtual environment, interacting with virtual and real objects, and understanding the feedback system. To help a beginner, it is advisable to provide clear instructions and demonstrations. Begin by launching the mixed reality for education or MRE application, and loading the desired services on the cell phone.Now insert the cell phone into the VR glasses, and put the glasses on. Visually locate the center of the MRE prototype base. When the simulation appears, raise an outstretched hand to place it in the center of the view.To prepare the user for VR, without the glasses, open the MRE application, and select the scenario the user wants to perform. Press play, and execute the scenario. Execute the first electric component scenario by using red, green, and blue.To locate the areas to position components, take the component and position it in the right place. Continue until all components are placed accurately. Typical deviation without the use of MRE was observed to be more dispersed.The best average obtained was when MRE was used with teacher feedback. MRE usage ensured an average score of 7.5 and above. MRE with feedback resulted in average scores of eight and higher, with the highest scores of all three groups at 9.3 and 9.5.The most critical aspect of this procedure is to detect the real objects, therefore, the detection of the user hands is essential to be able to execute the scenarios. The current procedure can be applied to the industry, for example, the training of new employees, allowing them to train in safe environments. This technique has helped expand the study to more students of the same level of knowledge.Similarly, automated feedback could be analyzed to verify if it has an impact on learning.

Research

JoVE Journal

Engineering

Implementation of a Reference Interferometer for Nanodetection

A thermally and mechanically stabilized fiber interferometer suited for examining ultra-high quality factor microcavities is fashioned. After assessing ...

Detection and Recovery of Palladium, Gold and Cobalt Metals from the Urban Mine Using Novel Sensors/Adsorbents Designated with Nanoscale Wagon-wheel-shaped Pores

Developing low-cost, efficient processes for recovering and recycling palladium, gold and cobalt metals from urban mine remains a significant challenge in ...

A Novel Method for In Situ Electromechanical Characterization of Nanoscale Specimens

A Novel Method for In Situ Electromechanical Characterization of Nanoscale Specimens

Electrically assisted deformation (EAD) is increasingly being used to improve the formability of metals during processes such as sheet metal rolling and ...

Fabrication of Polymer Microspheres for Optical Resonator and Laser Applications

This paper describes three methods of preparing fluorescent microspheres comprising &#960;-conjugated or non-conjugated polymers: vapor diffusion, ...

Design and Implementation of a Bespoke Robotic Manipulator for Extra-corporeal Ultrasound

With the potential for high precision, dexterity, and repeatability, a self-tracked robotic system can be employed to assist the acquisition of real-time ...

O-cresol Concentration Online Measurement Based On Near Infrared Spectroscopy Via Partial Least Square Regression

Unlike macroscopic process variables, near-infrared spectroscopy provides process information at the molecular level and can significantly improve the ...

Implementation of a Nonlinear Microscope Based on Stimulated Raman Scattering

Stimulated Raman scattering (SRS) microscopy uses near-infrared excitation light; therefore, it shares many multi-photon microscopic imaging properties. ...

Evaluating Usability Aspects of a Mixed Reality Solution for Immersive Analytics in Industry 4.0 Scenarios

In medicine or industry, the analysis of high-dimensional data sets is increasingly required. However, available technical solutions are often complex to ...

A Versatile Kit Based on Digital Microfluidics Droplet Actuation for Science Education

This paper describes an educational kit based on digital microfluidics. A protocol for luminol-based chemiluminescence experiment is reported as a ...

Interactive and Visualized Online Experimentation System for Engineering Education and Research

Experimentation is crucial in engineering education. This work explores visualized experiments in online laboratories for teaching and learning and also ...