<ol>
	<li>Rand, R. P., Burton, A. C. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Mechanical+properties+of+the+red+cell+membrane.+I.+Membrane+stiffness+and+intracellular+pressure.">Mechanical properties of the red cell membrane. I. Membrane stiffness and intracellular pressure.</a> Biophys. J. 4, 115-135 (1964).</li><li>Discher, D. E., Mohandas, N., Evans, E. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Molecular+maps+of+red+cell+deformation:+hidden+elasticity+and+in+situ+connectivity.">Molecular maps of red cell deformation: hidden elasticity and in situ connectivity.</a> Science. 266, 1032-1035 (1994).</li><li>Schmid-Sch&#246;nbein, G. W., Sung, K. L., T&#246;zeren, H., Skalak, R., Chien, S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Passive+mechanical+properties+of+human+leukocytes.">Passive mechanical properties of human leukocytes.</a> Biophys. J. 36, 243-256 (1981).</li><li>Guilak, F., Tedrow, J. R., Burgkart, R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Viscoelastic+properties+of+the+cell+nucleus.">Viscoelastic properties of the cell nucleus.</a> Biochem. Biophys. Re.s Commun. 269, 781-786 (2000).</li><li>Needham, D., Nunn, R. S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Elastic+deformation+and+failure+of+lipid+bilayer+membranes+containing+cholesterol.">Elastic deformation and failure of lipid bilayer membranes containing cholesterol.</a> Biophys. J. 58, 997-1009 (1990).</li><li>Sato, M., Theret, D. P., Wheeler, L. T., Ohshima, N., Nerem, R. M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Application+of+the+micropipette+technique+to+the+measurement+of+cultured+porcine+aortic+endothelial+cell+viscoelastic+properties.">Application of the micropipette technique to the measurement of cultured porcine aortic endothelial cell viscoelastic properties.</a> Journal of Biomechanical Engineering. 112, 263-268 (1990).</li><li>Theret, D. P., Levesque, M. J., Sato, F., Nerem, R. M., Wheeler, L. T. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+application+of+a+homogeneous+half-space+model+in+the+analysis+of+endothelial+cell+micropipette+measurements.">The application of a homogeneous half-space model in the analysis of endothelial cell micropipette measurements.</a> J. of Biomechanical Engineering. 110, 190-199 (1988).</li><li>Hochmuth, R. M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Micropipette+aspiration+of+living+cells.">Micropipette aspiration of living cells.</a> J. Biomech. 33, 15-22 (2000).</li><li>Lim, C. T., Zhou, E. H., Quek, S. T. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Mechanical+models+for+living+cells--a+review.">Mechanical models for living cells--a review.</a> Journal of Biomechanics. 39, 195 (2006).</li><li>Zhao, R., Wyss, K., Simmons, C. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Comparison+of+analytical+and+inverse+finite+element+approaches+to+estimate+cell+viscoelastic+properties+by+micropipette+aspiration.">Comparison of analytical and inverse finite element approaches to estimate cell viscoelastic properties by micropipette aspiration.</a> Journal of Biomechanics. 42, 2768 (2009).</li><li>Chien, S., Sung, K. L., Skalak, R., Usami, S., Tozeren, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Theoretical+and+experimental+studies+on+viscoelastic+properties+of+erythrocyte+membrane.">Theoretical and experimental studies on viscoelastic properties of erythrocyte membrane.</a> Biophys. J. 24, 463-487 (1978).</li><li>Evans, E., Kuhan, B. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Passive+material+behavior+of+granulocytes+based+on+large+deformation+and+recovery+after+deformation+tests.">Passive material behavior of granulocytes based on large deformation and recovery after deformation tests.</a> Blood. 64, 1028-1035 (1984).</li><li>Sato, M., Levesque, M. J., Nerem, R. M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Micropipette+aspiration+of+cultured+bovine+aortic+endothelial+cells+exposed+to+shear+stress.">Micropipette aspiration of cultured bovine aortic endothelial cells exposed to shear stress.</a> Arteriosclerosis. 7, 276-286 (1987).</li><li>Byfield, F., Aranda-Aspinoza, H., Romanenko, V. G., Rothblat, G. H., Levitan, I. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Cholesterol+depletion+increases+membrane+stiffness+of+aortic+endothelial+cells.">Cholesterol depletion increases membrane stiffness of aortic endothelial cells.</a> Biophys. J. 87, 3336-3343 (2004).</li><li>Byfield, F. J., Hoffman, B. D., Romanenko, V. G., Fang, Y., Crocker, J. C., Levitan, I. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Evidence+for+the+role+of+cell+stiffness+in+modulation+of+volume-regulated+anion+channels.">Evidence for the role of cell stiffness in modulation of volume-regulated anion channels.</a> Acta. Physiologica. 187, 285-294 (2006).</li><li>Byfield, F. J., Reen, R. K., Shentu, T. -. P., Levitan, I., Gooch, K. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Endothelial+actin+and+cell+stiffness+is+modulated+by+substrate+stiffness+in+2D+and+3D.">Endothelial actin and cell stiffness is modulated by substrate stiffness in 2D and 3D.</a> Journal of Biomechanics. 42, 1114 (2009).</li><li>Evans, E., Needham, D. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Physical+properties+of+surfactant+bilayer+membranes:+thermal+transitions,+elasticity,+rigidity,+cohesion+and+colloidal+interactions.">Physical properties of surfactant bilayer membranes: thermal transitions, elasticity, rigidity, cohesion and colloidal interactions.</a> Journal of Physical Chemistry. 91, 4219-4228 (1987).</li><li>Sun, M., Northup, N., Marga, F., Huber, T., Byfield, F. J., Levitan, I., Forgacs, G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+effect+of+cellular+cholesterol+on+membrane-cytoskeleton+adhesion.">The effect of cellular cholesterol on membrane-cytoskeleton adhesion.</a> J. Cell. Sci. 120, 2223-2231 (2007).</li><li>Shentu, T. P., Titushkin, I., Singh, D. K., Gooch, K. J., Subbaiah, P. V., Cho, M., Levitan, I. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=oxLDL-induced+decrease+in+lipid+order+of+membrane+domains+is+inversely+correlated+with+endothelial+stiffness+and+network+formation.">oxLDL-induced decrease in lipid order of membrane domains is inversely correlated with endothelial stiffness and network formation.</a> Am. J. Physiol. Cell. Physiol. 299, 218-229 (2010).</li><li>Norman, L. L., Oetama, R. J., Dembo, M., Byfield, F., Hammer, D. A., Levitan, I., Aranda-Espinoza, H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Modification+of+Cellular+Cholesterol+Content+Affects+Traction+Force,+Adhesion+and+Cell+Spreading.">Modification of Cellular Cholesterol Content Affects Traction Force, Adhesion and Cell Spreading.</a> Cell Mol. Bioeng. 3, 151-162 (2010).</li><li>Mitchinson, J. M., Swann, M. M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+Mechanical+Properties+of+the+Cell+Surface:+I.+The+Cell+Elastimeter.">The Mechanical Properties of the Cell Surface: I. The Cell Elastimeter.</a> J. of Experimental Biology. 31, 443-460 (1954).</li><li>Byfield, F. J., Tikku, S., Rothblat, G. H., Gooch, K. J., Levitan, I. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=OxLDL+increases+endothelial+stiffness,+force+generation,+and+network+formation.">OxLDL increases endothelial stiffness, force generation, and network formation.</a> J. Lipid Res. 47, 715-723 (2006).</li><li>Ohashi, T., Ishii, Y., Ishikawa, Y., Matsumoto, T., Sato, M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Experimental+and+numerical+analyses+of+local+mechanical+properties+measured+by+atomic+force+microscopy+for+sheared+endothelial+cells.">Experimental and numerical analyses of local mechanical properties measured by atomic force microscopy for sheared endothelial cells.</a> Biomed. Mater. Eng. 12, 319-327 (2002).</li><li>Solon, J., Levental, I., Sengupta, K., Georges, P. C., Janmey, P. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Fibroblast+adaptation+and+stiffness+matching+to+soft+elastic+substrates.">Fibroblast adaptation and stiffness matching to soft elastic substrates.</a> Biophysical Journal. 93, 4453 (2007).</li><li>Kowalsky, G. B., Byfield, F. J., Levitan, I. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=oxLDL+facilitates+flow-induced+realignment+of+aortic+endothelial+cells.">oxLDL facilitates flow-induced realignment of aortic endothelial cells.</a> Am. J. Physiol. Cell. Physiol. 295, 332-340 (2008).</li><li>Ketene, A. N., Schmelz, E. M., Roberts, P. C., Agah, M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+effects+of+cancer+progression+on+the+viscoelasticity+of+ovarian+cell+cytoskeleton+structures.">The effects of cancer progression on the viscoelasticity of ovarian cell cytoskeleton structures.</a> Nanomedicine: Nanotechnology, Biology and Medicine. , (2011).</li><li>Kole, T. P., Tseng, Y., Huang, L., Katz, J. L., Wirtz, D. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Rho+kinase+regulates+the+intracellular+micromechanical+response+of+adherent+cells+to+rho+activation.">Rho kinase regulates the intracellular micromechanical response of adherent cells to rho activation.</a> Mol. Biol. Cell. 15, 3475-3484 (2004).</li><li>Hall, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Rho+GTPases+and+the+Actin+Cytoskeleton.">Rho GTPases and the Actin Cytoskeleton.</a> Science. 279, 509-514 (1998).</li><li>Okajima, T. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Atomic+Force+Microscopy+for+the+Examination+of+Single+Cell+Rheology.+In.">Atomic Force Microscopy for the Examination of Single Cell Rheology. In.</a> Methods Mol. Biol. 736, 303-329 (2011).</li><li>Wang, N., Butler, J. P., Ingber, D. E. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Mechanotransduction+across+the+cell+surface+and+through+the+cytoskeleton.">Mechanotransduction across the cell surface and through the cytoskeleton.</a> Science. 260, 1124-1127 (1993).</li><li>Fabry, B., Maksym, G. N., Butler, J. P., Glogauer, M., Navajas, D., Fredberg, J. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Scaling+the+microrheology+of+living+cells.">Scaling the microrheology of living cells.</a> Physical Review Letters. 87, 148102 (2001).</li><li>Park, C. Y., Tambe, D., Alencar, A. M., Trepat, X., Zhou, E. H., Millet, E., Butler, J. P., Fredberg, J. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Mapping+the+cytoskeletal+prestress.">Mapping the cytoskeletal prestress.</a> American Journal of Physiology - Cell Physiology. 298, C1245-C1252 (2010).</li><li>Munevar, S., Wang, Y., Dembo, M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Traction+force+microscopy+of+migrating+normal+and+H-ras+transformed+3T3+fibroblasts.">Traction force microscopy of migrating normal and H-ras transformed 3T3 fibroblasts.</a> Biophys. J. 80, 1744-1757 (2001).</li><li>Wirtz, D. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Particle-tracking+microrheology+of+living+cells:+principles+and+applications.">Particle-tracking microrheology of living cells: principles and applications.</a> Annu. Rev. Biophys. 38, 301-326 (2009).</li><li>Shin, D., Athanasiou, K. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Cytoindentation+for+obtaining+cell+biomechanical+properties.">Cytoindentation for obtaining cell biomechanical properties.</a> J. Orthop. Res. 17, 880-890 (1999).</li><li>Ou-Yang, H. D., Wei, M. T. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Complex+fluids:+probing+mechanical+properties+of+biological+systems+with+optical+tweezers.">Complex fluids: probing mechanical properties of biological systems with optical tweezers.</a> Annu. Rev. Phys. Chem. 61, 421-440 (2010).</li><li>Hosu, B. G., Sun, M., Marga, F., Grandbois, M., Forgacs, G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Eukaryotic+membrane+tethers+revisited+using+magnetic+tweezers.">Eukaryotic membrane tethers revisited using magnetic tweezers.</a> Phys. Biol. 4, 67-78 (2007).</li></ol>

Aucun conflit d&#39;intérêt déclaré.

Microaspiration fournit une méthode simple et hautement reproductible pour estimer la rigidité cellulaire / déformation en appliquant une pression négative à une membrane cellulaire et la mesure de la déformabilité membrane en réponse à une pression bien défini. Il a d&#39;abord été développé par Mitchison et Swann (1954) pour caractériser les propriétés élastiques des œufs d&#39;oursin à fournir des indications sur les mécanismes de la division cellulaire de 21, puis de regarder les prop...

<table border="1"><tbody><tr><td> Nom du réactif </td><td> Entreprise </td><td> Catalogue / Numéro de modèle </td><td> Commentaires </td></tr><tr><td> Sutter pipette extracteur </td><td> Sutter Instruments </td><td> P-97 </td><td></td></tr><tr><td> Microforge </td><td> Narishige </td><td> MF-830 </td><td></td></tr><tr><td> Microscope à fluorescence inversé </td><td> Zeiss </td><td> Axiovert 200M </td><td> Le microscope doit être équipé de préférence avec des capacités 3D/deconvolution. </td></tr><tr><td> Caméra vidéo </td><td> Zeiss </td><td> AxioCam MRm </td><td></td></tr><tr><td> Image Acquisition sotware </td><td> Zeiss </td><td> AxioVision </td><td></td></tr><tr><td> Capteur de pression pneumatique </td><td> BioTek </td><td> DPM-1B </td><td> Tester DPM1B transducteur pneumatique peuvent maintenant être trouvés par FLUKE. </td></tr><tr><td> Pipette en verre </td&gt; <td> Richland </td><td> Verre sur mesure </td><td> Pipettes ont été adaptés avec un diamètre 1,2 et 1,6 intérieur diamètre extérieur. </td></tr><tr><td> Dil Dye </td><td> Invitrogen </td><td> D282 </td><td> Se dissout bien dans le DMSO </td></tr></tbody></table>

micropipette aspiration of substrate-attached cells to estimate cell stiffness

Nombre croissant d&#39;études montrent que les propriétés biomécaniques des cellules individuelles jouent un rôle majeur dans de multiples fonctions cellulaires, y compris la prolifération cellulaire, la différenciation, la migration et interactions cellule-cellule. Les deux paramètres clés de la biomécanique cellulaires sont déformabilité cellulaire ou la rigidité et la capacité des cellules de se contracter et générer de la force. Nous décrivons ici une méthode rapide et simple pour estimer la rigidité cellulaire en mesurant le degré de déformation de la membrane en réponse à une pression négative appliquée par une micropipette de verre à la surface cellulaire, une technique qui s&#39;appelle aspiration par micropipette ou microaspiration. Microaspiration est effectuée en tirant un capillaire en verre pour créer une micropipette avec une pointe très petit (2-50 um de diamètre en fonction de la taille d&#39;une cellule ou un échantillon de tissu), qui est ensuite reliée à un transducteur de pression pneumatique et amené à sa fin proximité d&#39;une cellule sous un microscope. Lorsque l&#39;la pointe de la pipette en contact avec une cellule, une étape de pression négative est appliquée à la pipette par le transducteur de pression pneumatique générant une pression bien définie sur la membrane cellulaire. En réponse à la pression, la membrane est aspiré dans la pipette et la membrane déformation progressive ou &quot;membrane projection&quot; dans la pipette est mesurée en fonction du temps. Le principe de base de cette approche expérimentale est que le degré de déformation de la membrane en réponse à une force définie mécanique est fonction de la rigidité de membrane. La rigidité de la membrane est, plus la vitesse de déformation de la membrane et plus la technique de l&#39;état d&#39;équilibre aspiration length.The peut être effectuée sur des cellules isolées, à la fois en suspension et le substrat-joints, organites grandes, et des liposomes. Analyse est effectuée en comparant les déformations maximales membranaires obtenus sous une pression donnée pour différentes populations de cellules ou des conditions expérimentales. Un «coefficient de rigidité» est estimée en traçant la longueur de déformation de la membrane à aspiration en fonction de la pression appliquée. En outre, les données peuvent être analysées pour estimer le module d&#39;Young des cellules (E), le paramètre le plus courant pour caractériser la rigidité des matériaux. Il est important de noter que les membranes plasmiques des cellules eucaryotes peut être considéré comme un système bi-composant où bicouche lipidique membranaire est sous-tendue par le cytosquelette sous-membranaire et que c&#39;est le cytosquelette qui constitue l&#39;échafaudage mécanique de la membrane et domine la déformabilité de l&#39;enveloppe cellulaire. Cette approche, par conséquent, permet de sonder les propriétés biomécaniques du cytosquelette sous-membranaire.

Watch this Scientific Journal Video about Micropipette Aspiration of Substrate-attached Cells to Estimate Cell Stiffness at JoVE.com

Micropipette Aspiration of Substrate-attached Cells to Estimate Cell Stiffness

Nous décrivons ici une méthode simple et rapide pour mesurer la rigidité cellulaire. Le principe général de cette approche consiste à mesurer déformation de la membrane en réponse à bien défini pression négative appliquée par le biais d&#39;une micropipette à la surface cellulaire. Cette méthode fournit un outil puissant pour étudier les propriétés biomécaniques du substrat-jointes cellules.

Aspiration par micropipette des cellules au substrat joints pour estimer la rigidité cellulaire

Growing number of studies show that biomechanical properties of individual cells play major roles in multiple cellular functions, including cell ...

micropipette-aspiration-substrate-attached-cells-to-estimate-cell

Research

JoVE Journal

Bioengineering

19.8K vues.  University of Illinois. Nous décrivons ici une méthode simple et rapide pour mesurer la rigidité cellulaire. Le principe général de cette approche consiste à mesurer déformation de la membrane en réponse à bien défini pression négative appliquée par le biais d'une micropipette à la surface cellulaire. Cette méthode fournit un outil puissant pour étudier les propriétés biomécaniques du substrat-jointes cellules.

Vidéo: Micropipette Aspiration of Substrate-attached Cells to Estimate Cell Stiffness

Design of a Cyclic Pressure Bioreactor for the Ex Vivo Study of Aortic Heart Valves

The aortic valve, located between the left ventricle and the aorta, allows for unidirectional blood flow, preventing backflow into the ventricle. Aortic valve leaflets are composed of interstitial cells suspended within an extracellular matrix (ECM) and are lined with an endothelial cell monolayer. The valve withstands a harsh, dynamic environment and is constantly exposed to shear, flexion, tension, and compression. Research has shown calcific lesions in diseased valves occur in areas of high mechanical stress as a result of endothelial disruption or interstitial matrix damage1-3. Hence, it is not surprising that epidemiological studies have shown high blood pressure to be a leading risk factor in the onset of aortic valve disease4. 
The only treatment option currently available for valve disease is surgical replacement of the diseased valve with a bioprosthetic or mechanical valve5. Improved understanding of valve biology in response to physical stresses would help elucidate the mechanisms of valve pathogenesis. In turn, this could help in the development of non-invasive therapies such as pharmaceutical intervention or prevention. Several bioreactors have been previously developed to study the mechanobiology of native or engineered heart valves6-9. Pulsatile bioreactors have also been developed to study a range of tissues including cartilage10, bone11 and bladder12. The aim of this work was to develop a cyclic pressure system that could be used to elucidate the biological response of aortic valve leaflets to increased pressure loads. 
The system consisted of an acrylic chamber in which to place samples and produce cyclic pressure, viton diaphragm solenoid valves to control the timing of the pressure cycle, and a computer to control electrical devices. The pressure was monitored using a pressure transducer, and the signal was conditioned using a load cell conditioner. A LabVIEW program regulated the pressure using an analog device to pump compressed air into the system at the appropriate rate. The system mimicked the dynamic transvalvular pressure levels associated with the aortic valve; a saw tooth wave produced a gradual increase in pressure, typical of the transvalvular pressure gradient that is present across the valve during diastole, followed by a sharp pressure drop depicting valve opening in systole. The LabVIEW program allowed users to control the magnitude and frequency of cyclic pressure. The system was able to subject tissue samples to physiological and pathological pressure conditions. This device can be used to increase our understanding of how heart valves respond to changes in the local mechanical environment.

Design of a Cyclic Pressure Bioreactor for the Ex Vivo Study of Aortic Heart Valves

A cyclic pressure bioreactor capable of subjecting heart valve tissue to physiological and pathological pressure conditions has been designed. A LabVIEW program allows users to control pressure magnitude, amplitude and frequency. This device can be used to study the mechanobiology of heart valve tissue or isolated cells.

Conception d&#39;un bioréacteur pour la pression cyclique Ex Vivo Étude des valves cardiaques aortiques

The aortic valve, located between the left ventricle and the aorta, allows for unidirectional blood flow, preventing backflow into the ventricle. Aortic ...

Recherche

Bio-ingénierie

Alginate Microcapsule as a 3D Platform for Propagation and Differentiation of Human Embryonic Stem Cells (hESC) to Different Lineages

Human embryonic stem cells (hESC) are emerging as an attractive alternative source for cell replacement therapy since they can be expanded in culture indefinitely and differentiated to any cell types in the body. Various types of biomaterials have also been used in stem cell cultures to provide a microenvironment mimicking the stem cell niche1-3. The latter is important for promoting cell-to-cell interaction, cell proliferation, and differentiation into specific lineages as well as tissue organization by providing a three-dimensional (3D) environment4 such as encapsulation. The principle of cell encapsulation involves entrapment of living cells within the confines of semi-permeable membranes in 3D cultures2. These membranes allow for the exchange of nutrients, oxygen and stimuli across the membranes, whereas antibodies and immune cells from the host that are larger than the capsule pore size are excluded5. Here, we present an approach to culture and differentiate hESC DA neurons in a 3D microenvironment using alginate microcapsules. We have modified the culture conditions2 to enhance the viability of encapsulated hESC. We have previously shown that the addition of p160-Rho-associated coiled-coil kinase (ROCK) inhibitor, Y-27632 and human fetal fibroblast-conditioned serum replacement medium (hFF-CM) to the 3D platform significantly enhanced the viability of encapsulated hESC in which the cells expressed definitive endoderm marker genes1. We have now used this 3D platform for the propagation of hESC and efficient differentiation to DA neurons. Protein and gene expression analyses after the final stage of DA neuronal differentiation showed an increased expression of tyrosine hydroxylase (TH), a marker for DA neurons, &gt;100 folds after 2 weeks. We hypothesized that our 3D platform using alginate microcapsules may be useful to study the proliferation and directed differentiation of hESC to various lineages. This 3D system also allows the separation of feeder cells from hESC during the process of differentiation and also has potential for immune-isolation during transplantation in the future.

Alginate Microcapsule as a 3D Platform for Propagation and Differentiation of Human Embryonic Stem Cells hESC to Different Lineages

We have optimized a microencapsulation technique as an effective 3D platform for propagation and differentiation of embryonic stem cells to endoderm and dopaminergic (DA) neurons. It also provides an opportunity for immune-isolation of cells from the host during transplantation. This platform can be adapted for other cell types.

Microcapsules d&#39;alginate comme une plate-forme 3D pour la Propagation et différenciation des cellules souches embryonnaires humaines (CSEh) à différentes lignées

Human embryonic stem cells (hESC) are emerging as an attractive alternative source for cell replacement therapy since they can be expanded in culture ...

Spatio-Temporal Manipulation of Small GTPase Activity at Subcellular Level and on Timescale of Seconds in Living Cells

Dynamic regulation of the Rho family of small guanosine triphosphatases (GTPases) with great spatiotemporal precision is essential for various cellular functions and events1, 2. Their spatiotemporally dynamic nature has been revealed by visualization of their activity and localization in real time3. In order to gain deeper understanding of their roles in diverse cellular functions at the molecular level, the next step should be perturbation of protein activities at a precise subcellular location and timing. 
To achieve this goal, we have developed a method for light-induced, spatio-temporally controlled activation of small GTPases by combining two techniques: (1) rapamycin-induced FKBP-FRB heterodimerization and (2) a photo-caging method of rapamycin. With the use of rapamycin-mediated FKBP-FRB heterodimerization, we have developed a method for rapidly inducible activation or inactivation of small GTPases including Rac4, Cdc424, RhoA4 and Ras5, in which rapamycin induces translocation of FKBP-fused GTPases, or their activators, to the plasma membrane where FRB is anchored. For coupling with this heterodimerization system, we have also developed a photo-caging system of rapamycin analogs. A photo-caged compound is a small molecule whose activity is suppressed with a photocleavable protecting group known as a caging group. To suppress heterodimerization activity completely, we designed a caged rapamycin that is tethered to a macromolecule such that the resulting large complex cannot cross the plasma membrane, leading to virtually no background activity as a chemical dimerizer inside cells6. Figure 1 illustrates a scheme of our system. With the combination of these two systems, we locally recruited a Rac activator to the plasma membrane on a timescale of seconds and achieved light-induced Rac activation at the subcellular level6.

A method for spatio-temporal control of small GTPase activity by light is described. This method is based on rapamycin-induced FKBP-FRB heterodimerization and photo-caging systems. Optimization of light-irradiation enables the spatio-temporally controlled activation of small GTPases at the subcellular level.

Spatio-temporelle de manipulation de l&#39;activité GTPase Petit au niveau subcellulaire et sur des échelles de secondes dans les cellules vivantes

Dynamic regulation of the Rho family of small guanosine triphosphatases (GTPases) with great spatiotemporal precision is essential for various cellular ...

Development, Expansion, and In vivo Monitoring of Human NK Cells from Human Embryonic Stem Cells (hESCs) and Induced Pluripotent Stem Cells (iPSCs)

We present a method for deriving natural killer (NK) cells from undifferentiated hESCs and iPSCs using a feeder-free approach. This method gives rise to high levels of NK cells after 4 weeks culture and can undergo further 2-log expansion with artificial antigen presenting cells. hESC- and iPSC-derived NK cells developed in this system have a mature phenotype and function. The production of large numbers of genetically modifiable NK cells is applicable for both basic mechanistic as well as anti-tumor studies. Expression of firefly luciferase in hESC-derived NK cells allows a non-invasive approach to follow NK cell engraftment, distribution, and function. We also describe a dual-imaging scheme that allows separate monitoring of two different cell populations to more distinctly characterize their interactions in vivo. This method of derivation, expansion, and dual in vivo imaging provides a reliable approach for producing NK cells and their evaluation which is necessary to improve current NK cell adoptive therapies.

Development, Expansion, and In vivo Monitoring of Human NK Cells from Human Embryonic Stem Cells hESCs and Induced Pluripotent Stem Cells iPSCs

This protocol describes the development, expansion, and in vivo imaging of NK cells derived from hESCs and iPSCs.

Le développement, l&#39;expansion et<em&gt; In vivo</em&gt; Suivi des cellules NK humaines à partir de cellules souches embryonnaires humaines (CSEh) et et induit des cellules souches pluripotentes (CISP)

We present a method for deriving natural killer (NK) cells from undifferentiated hESCs and iPSCs using a feeder-free approach. This method gives rise to ...

Transplantation of Induced Pluripotent Stem Cell-derived Mesoangioblast-like Myogenic Progenitors in Mouse Models of Muscle Regeneration

Patient-derived iPSCs could be an invaluable source of cells for future autologous cell therapy protocols. iPSC-derived myogenic stem/progenitor cells similar to pericyte-derived mesoangioblasts (iPSC-derived mesoangioblast-like stem/progenitor cells: IDEMs) can be established from iPSCs generated from patients affected by different forms of muscular dystrophy. Patient-specific IDEMs can be genetically corrected with different strategies (e.g. lentiviral vectors, human artificial chromosomes) and enhanced in their myogenic differentiation potential upon overexpression of the myogenesis regulator MyoD. This myogenic potential is then assessed in vitro with specific differentiation assays and analyzed by immunofluorescence. The regenerative potential of IDEMs is further evaluated in vivo, upon intramuscular and intra-arterial transplantation in two representative mouse models displaying acute and chronic muscle regeneration. The contribution of IDEMs to the host skeletal muscle is then confirmed by different functional tests in transplanted mice. In particular, the amelioration of the motor capacity of the animals is studied with treadmill tests. Cell engraftment and differentiation are then assessed by a number of histological and immunofluorescence assays on transplanted muscles. Overall, this paper describes the assays and tools currently utilized to evaluate the differentiation capacity of IDEMs, focusing on the transplantation methods and subsequent outcome measures to analyze the efficacy of cell transplantation.

Induced pluripotent stem cell (iPSC)-derived myogenic progenitors are promising candidates for cell therapy strategies to treat muscular dystrophies. This protocol describes transplantation and functional measurements required to evaluate the engraftment and differentiation of iPSC-derived mesoangioblasts (a type of muscle progenitors) in mouse models of acute and chronic muscle regeneration.

Transplantation de progéniteurs myoangioblastes dérivés de cellules souches pluripotentes induites dans des modèles murins de régénération musculaire

Patient-derived iPSCs could be an invaluable source of cells for future autologous cell therapy protocols. iPSC-derived myogenic stem/progenitor cells ...

Ordering Single Cells and Single Embryos in 3D Confinement: A New Device for High Content Screening

Biological cells are usually observed on flat (2D) surfaces. This condition is not physiological, and phenotypes and shapes are highly variable. Screening based on cells in such environments have therefore serious limitations: cell organelles show extreme phenotypes, cell morphologies and sizes are heterogeneous and/or specific cell organelles cannot be properly visualized. In addition, cells in vivo are located in a 3D environment; in this situation, cells show different phenotypes mainly because of their interaction with the surrounding extracellular matrix of the tissue. In order to standardize and generate order of single cells in a physiologically-relevant 3D environment for cell-based assays, we report here the microfabrication and applications of a device for in vitro 3D cell culture. This device consists of a 2D array of microcavities (typically 105 cavities/cm2), each filled with single cells or embryos. Cell position, shape, polarity and internal cell organization become then normalized showing a 3D architecture. We used replica molding to pattern an array of microcavities, &#8216;eggcups&#8217;, onto a thin polydimethylsiloxane (PDMS) layer adhered on a coverslip. Cavities were covered with fibronectin to facilitate adhesion. Cells were inserted by centrifugation. Filling percentage was optimized for each system allowing up to 80%. Cells and embryos viability was confirmed. We applied this methodology for the visualization of cellular organelles, such as nucleus and Golgi apparatus, and to study active processes, such as the closure of the cytokinetic ring during cell mitosis. This device allowed the identification of new features, such as periodic accumulations and inhomogeneities of myosin and actin during the cytokinetic ring closure and compacted phenotypes for Golgi and nucleus alignment. We characterized the method for mammalian cells, fission yeast, budding yeast, C. elegans with specific adaptation in each case. Finally, the characteristics of this device make it particularly interesting for drug screening assays and personalized medicine.

We report a device and a new method to study cells and embryos. Single cells are precisely ordered in microcavity arrays. Their 3D confinement is a step towards 3D environments encountered in physiological conditions and allows organelle orientation. By controlling cell shape, this setup minimizes variability reported in standard assays.

Commande de cellules simples et simple Embryons en 3D Confinement: un nouveau dispositif de criblage à haut débit

Biological cells are usually observed on flat (2D) surfaces. This condition is not physiological, and phenotypes and shapes are highly variable. Screening ...

Simple Polyacrylamide-based Multiwell Stiffness Assay for the Study of Stiffness-dependent Cell Responses

Currently, most of the in vitro cell research is performed on rigid tissue culture polystyrene (~1 GPa), while most cells in the body are attached to a matrix that is elastic and much softer (0.1 &#8211; 100 kPa). Since such stiffness mismatch greatly affects cell responses, there is a strong interest in developing hydrogel materials that span a wide range of stiffness to serve as cell substrates. Polyacrylamide gels, which are inexpensive and cover the stiffness range of all soft tissues in the body, are the hydrogel of choice for many research groups. However, polyacrylamide gel preparation is lengthy, tedious, and only suitable for small batches. Here, we describe an assay which by utilizing a permanent flexible plastic film as a structural support for the gels, enables the preparation of polyacrylamide gels in a multiwell plate format. The technique is faster, more efficient, and less costly than current methods and permits the preparation of gels of custom sizes not otherwise available. As it doesn&#8217;t require any specialized equipment, the method could be easily adopted by any research laboratory and would be particularly useful in research focused on understanding stiffness-dependent cell responses.

Here, a method that enables quick, efficient, and inexpensive preparation of polyacrylamide gels in a multiwell plate format is described. The method does not require any specialized equipment and could be easily adopted by any research laboratory. It would be particularly useful in research focused on understanding stiffness-dependent cell responses.

Multiwell Rigidité Essai pour l&#39;étude des réponses cellulaires Rigidité-dépendantes simple à base de polyacrylamide

Currently, most of the in vitro cell research is performed on rigid tissue culture polystyrene (~1 GPa), while most cells in the body are attached to a ...

A Method to Estimate Cadaveric Femur Cortical Strains During Fracture Testing Using Digital Image Correlation

This protocol describes the method using digital image correlation to estimate cortical strain from high speed video images of the cadaveric femoral surface obtained from mechanical testing. This optical method requires a texture of many contrasting fiduciary marks on a solid white background for accurate tracking of surface deformation as loading is applied to the specimen. Immediately prior to testing, the surface of interest in the camera view is painted with a water-based white primer and allowed to dry for several minutes. Then, a black paint is speckled carefully over the white background with special consideration for the even size and shape of the droplets. Illumination is carefully designed and set such that there is optimal contrast of these marks while minimizing reflections through the use of filters. Images were obtained through high speed video capture at up to 12,000 frames/s. The key images prior to and including the fracture event are extracted and deformations are estimated between successive frames in carefully sized interrogation windows over a specified region of interest. These deformations are then used to compute surface strain temporally during the fracture test. The strain data is very useful for identifying fracture initiation within the femur, and for eventual validation of proximal femur fracture strength models derived from Quantitative Computed Tomography-based Finite Element Analysis (QCT/FEA).

In this protocol, the femur surface strains are estimated during fracture testing using the digital image correlation technique. The novelty of the method involves application of a high-contrast stochastic speckle pattern on the femur surface, carefully specified illumination, high speed video capture, and digital image correlation analysis for strain calculations.

Une méthode d’estimation fémur cadavériques souches corticale lors de Fracture corrélation d’images numériques à l’aide de tests

This protocol describes the method using digital image correlation to estimate cortical strain from high speed video images of the cadaveric femoral ...

Human Pluripotent Stem Cell Culture on Polyvinyl Alcohol-Co-Itaconic Acid Hydrogels with Varying Stiffness Under Xeno-Free Conditions

The effect of physical cues, such as the stiffness of biomaterials on the proliferation and differentiation of stem cells, has been investigated by several researchers. However, most of these investigators have used polyacrylamide hydrogels for stem cell culture in their studies. Therefore, their results are controversial because those results might originate from the specific characteristics of the polyacrylamide and not from the physical cue (stiffness) of the biomaterials. Here, we describe a protocol for preparing hydrogels, which are not based on polyacrylamide, where various stem, cells including human embryonic stem (ES) cells and human induced pluripotent stem (iPS) cells, can be cultured. Hydrogels with varying stiffness were prepared from bioinert polyvinyl alcohol-co-itaconic acid (P-IA), with stiffness controlled by crosslinking degree by changing crosslinking time. The P-IA hydrogels grafted with and without oligopeptides derived from extracellular matrix were investigated as a future platform for stem cell culture and differentiation. The culture and passage of amniotic fluid stem cells, adipose-derived stem cells, human ES cells, and human iPS cells is described in detail here. The oligopeptide P-IA hydrogels showed superior performances, which were induced by their stiffness properties. This protocol reports the synthesis of the biomaterial, their surface manipulation, along with controlling the stiffness properties and finally, their impact on stem cell fate using xeno-free culture conditions. Based on recent studies, such modified substrates can act as future platforms to support and direct the fate of various stem cells line to different linkages; and further, regenerate and restore the functions of the lost organ or tissue.

A protocol is presented to prepare polyvinyl alcohol-co-itaconic acid hydrogels with varying stiffness, which were grafted with and without oligopeptides, to investigate the effect of the stiffness of biomaterials on the differentiation and proliferation of stem cells. The stiffness of the hydrogels was controlled by the crosslinking time.

Culture de cellules souches pluripotentes humaines sur Polyvinyl alcool-Co-itaconique acides Hydrogels avec raideur variable dans des Conditions sans Xeno

The effect of physical cues, such as the stiffness of biomaterials on the proliferation and differentiation of stem cells, has been investigated by ...

Stiffness Measurement of Soft Silicone Substrates for Mechanobiology Studies Using a Widefield Fluorescence Microscope

Soft tissues in the human body typically have stiffness in the kilopascal (kPa) range. Accordingly, silicone and hydrogel flexible substrates have been proven to be useful substrates for culturing cells in a physical microenvironment that partially mimics in vivo conditions. Here, we present a simple protocol for characterizing the Young's moduli of isotropic linear elastic substrates typically used for mechanobiology studies. The protocol consists of preparing a soft silicone substrate on a Petri dish or stiff silicone, coating the top surface of the silicone substrate with fluorescent beads, using a millimeter-scale sphere to indent the top surface (by gravity), imaging the fluorescent beads on the indented silicone surface using a fluorescence microscope, and analyzing the resultant images to calculate the Young's modulus of the silicone substrate. Coupling the substrate's top surface with a moduli extracellular matrix protein (in addition to the fluorescent beads) allows the silicone substrate to be readily used for cell plating and subsequent studies using traction force microscopy experiments. The use of stiff silicone, instead of a Petri dish, as the base of the soft silicone, enables the use of mechanobiology studies involving external stretch. A specific advantage of this protocol is that a widefield fluorescence microscope, which is commonly available in many labs, is the major equipment necessary for this procedure. We demonstrate this protocol by measuring the Young's modulus of soft silicone substrates of different elastic moduli.

Substrates with stiffness in the kilopascal-range are useful to study the response of cells to physiologically relevant micro-environment stiffness. Using just a widefield fluorescence microscope, the Young's modulus of soft silicone gels can be determined using an indentation with a suitable sphere.

Mesure de la rigidité des substrats souples en Silicone pour mécanobiologie études utilisant un Microscope à Fluorescence Widefield

Soft tissues in the human body typically have stiffness in the kilopascal (kPa) range. Accordingly, silicone and hydrogel flexible substrates have been ...