Ringraziamo Vi Nguyen per la lettura del manoscritto e l&#39;assistenza di laboratorio in generale.

1. Preparazione della cultura Agrobacterium <ol><li> Tumefaciens ceppo GV3101 precedentemente trasformato compatibile con BiFC Gateway vettore pEarleyGate201-YC e pEarleyGate202-YN, ciascuno contenente una fusione costrutto di governo indiano. </li><li> Inoculare un 5-ml YEB (5g L estratto di manzo -1, 1g L estratto di lievito -1, 5 g L -1 peptone, 5g L Saccarosio -1, 2mM MgSO 4, pH 7,2) cultura della proteina di fusione BiFC costruisce trasformato con l&#39;Agrobacterium selezione appropriato di antibiotici. Crescere la cultura notte a 28 ° C in agitazione a 200 rpm. </li><li> Togliere 1 ml di coltura in una provetta sterile 1,5 ml centrifuga. </li><li> Cellule pellet a 1.000 g per 10 minuti a temperatura ambiente, scartare il surnatante. </li><li> Lavare il pellet con l&#39;aggiunta di 1 ml di infiltrazione dei media (5 g L -1 D-glucosio, 50 mM MES (Sigma), 2 mM Na 3 PO 4, 0,1 mM acetosyringone) 11. Risospendere le sfere pipettando, le cellule pellet di nuovo a 1.000 g per 10 min. </li><li> Ripetere la fase di lavaggio altre due volte. </li><li> Risospendere il pellet in media da 0,5 ml infiltrazione. </li><li> Misurare l&#39;assorbanza a 600 nm e regolare finale OD 600-1,0 a 1,2. </li><li> Aliquota una quantità uguale di sospensione Agrobacterium di ogni costruzione in un nuovo tubo di 1,5 ml, vortex per 10 sec. Per una infiltrazione singole, 100 ml di ogni costrutto è più che sufficiente. </li><li> La miscela Agrobacterium è ora pronto per l&#39;infiltrazione. </li></ol> 2. Infiltrazione <ol start="11"><li> N. benthamiana piante sono coltivate a 21 ° C, con 16-ore di luce e 8-h cicli di buio. Cinque gli impianti di sei settimane di età dovrebbero essere usati per l&#39;infiltrazione. </li><li> Rimuovere le piante dalla camera di crescita e di luogo in luce bianca per 1 ora prima infiltratring permettendo stomi per aprire completamente. </li><li> Elaborare risospeso miscela Agrobacterium in un 1 ml slip-siringa senza ago tubercolina. </li><li> Posizionare la punta della siringa contro la parte inferiore della foglia e delicatamente spingere il pistone mentre direttamente a sostegno della parte superiore della foglia con un dito. Il liquido si diffonderà attraverso la foglia come si riempie gli spazi d&#39;aria mesophyllar. </li><li> Etichetta la zona infiltrata con un pennarello per l&#39;identificazione futuro. </li><li> Per infiltrarsi con diversi costrutti, assicuratevi di cambiare sia i guanti o pulirli con etanolo al 70% tra le infiltrazioni. Se possibile, lasciare uno spazio nervatura centrale tra campioni diversi per evitare la contaminazione crociata. </li><li> Posizionare le piante in un armadio di crescita in condizioni di crescita normale. </li></ol> 3. Osservazione del segnale YFP ricostituito <ol start="18"><li> Accise un segmento di 5mm x 5mm di tessuto di foglie all&#39;interno della zona infiltrata </li><li> Montare il campione, in acqua, su un vetrino di vetro, coprire il campione con un coprioggetto ed esaminare le interazioni con un microscopio confocale o fluorescenza. </li><li> Espressione deve essere monitorata ogni 24 ore dal momento di infiltrazione fino a 5 giorni dopo, come sopra espressione / traffico può comportare la visualizzazione di proteine ​​di fusione fluorescenti diversi luoghi nel corso del tempo. </li></ol> 4. Rappresentante dei risultati: Un esempio di interazione proteina-proteina testato mediante test BiFC è illustrato nella figura 1. AtTHP1 e AtSAC3A si ritiene siano componenti della Arabidopsis omologo di lievito TREX-2 complessi. Possono interagire con un AtNUP1 nuclearporin e facilitare l&#39;esportazione mRNA 10. AtTHP1 e AtSAC3A sono stati clonati in pEarlyGate201-YC mentre AtNUP1 è stato clonato in pEarlyGate202-YN. I costrutti sono stati successivamente trasformati in GV3101. I tre costrutti sono stati appaiati con 3 possibili combinazioni (AtTHP1 + AtNUP1; AtTHP1 + AtSAC3A; AtNUP1 + AtSAC3A) per l&#39;infiltrazione. Il segnale ricostituito YFP è stata osservata sotto un LCSM 48 ore dopo l&#39;infiltrazione. I segnali sono state osservate nelle cellule epidermiche e localizzato nella periferia nucleare o al plasma nucleare, che è coerente con la localizzazione sub-cellulare di queste proteine. I controlli negativi non hanno mostrato alcun segnale YFP. <img src="/files/ftp_upload/3473/3473fig1.jpg" alt="Figura 1" /> Figura 1. Arabidopsis TREX-2 componenti esportazione mRNA complesso interagire tra loro. N. benthamiana foglie, co-trasformato con costrutti del GOI fusa pEarleyGate201-YC e pEarleyGate202-YN (come indicato), hanno ripreso 48-72 ore dopo l&#39;infiltrazione, utilizzando un microscopio Leica TCS SP2 confocol. Le immagini sono mostrate come fusi YFP confocale e luminose immagini a campo di epidermica N. benthamiana foglia cellule

<ol>
	<li>Ohad, N., Yalovsky, S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Utilizing+bimolecular+fluorescence+complementation+(BiFC)+to+assay+protein-protein+interaction+in+plants.">Utilizing bimolecular fluorescence complementation (BiFC) to assay protein-protein interaction in plants.</a> Methods in molecular biology. 655, 347-358 (2010).</li><li>Fang, Y., Spector, D. L. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=BiFC+imaging+assay+for+plant+protein-protein+interactions.">BiFC imaging assay for plant protein-protein interactions.</a> Cold Spring Harbor protocols. 2, (2010).</li><li>Schutze, K., Harter, K., Chaban, C. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Bimolecular+fluorescence+complementation+(BiFC)+to+study+protein-protein+interactions+in+living+plant+cells.">Bimolecular fluorescence complementation (BiFC) to study protein-protein interactions in living plant cells.</a> Methods in molecular biology. 479, 189-202 (2009).</li><li>Hiatt, S. M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Bimolecular+fluorescence+complementation+(BiFC)+analysis+of+protein+interactions+in+Caenorhabditis+elegans.">Bimolecular fluorescence complementation (BiFC) analysis of protein interactions in Caenorhabditis elegans.</a> Methods. 45, 185-191 (2008).</li><li>Barnard, E. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Development+and+implementation+of+split-GFP-based+bimolecular+fluorescence+complementation+(BiFC)+assays+in+yeast.">Development and implementation of split-GFP-based bimolecular fluorescence complementation (BiFC) assays in yeast.</a> Biochemical Society Transactions. 36, 479-482 (2008).</li><li>Kerppola, T. K. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Design+and+implementation+of+bimolecular+fluorescence+complementation+(BiFC)+assays+for+the+visualization+of+protein+interactions+in+living+cells.">Design and implementation of bimolecular fluorescence complementation (BiFC) assays for the visualization of protein interactions in living cells.</a> Nature. 1, 1278-1286 (2006).</li><li>Hu, C. D., Grinberg, A. V., Kerppola, T. K. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Visualization+of+protein+interactions+in+living+cells+using+bimolecular+fluorescence+complementation+(BiFC)+analysis.">Visualization of protein interactions in living cells using bimolecular fluorescence complementation (BiFC) analysis.</a> Current protocols in cell biology. 21, 3-3 (2006).</li><li>Earley, K. W. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Gateway-compatible+vectors+for+plant+functional+genomics+and+proteomics.">Gateway-compatible vectors for plant functional genomics and proteomics.</a> The Plant journal : for cell and molecular biology. 45, 616-629 (2006).</li><li>Karimi, M., Inze, D., Depicker, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=GATEWAY+vectors+for+Agrobacterium-mediated+plant+transformation.">GATEWAY vectors for Agrobacterium-mediated plant transformation.</a> Trends in Plant Science. 7, 193-195 (2002).</li><li>Lu, Q. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Arabidopsis+homolog+of+the+yeast+TREX-2+mRNA+export+complex:+components+and+anchoring+nucleoporin.">Arabidopsis homolog of the yeast TREX-2 mRNA export complex: components and anchoring nucleoporin.</a> The Plant journal : for cell and molecular biology. 61, 259-270 (2010).</li><li>Sparkes, I. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=transient+expression+of+fluorescent+fusion+proteins+in+tobacco+plants+and+generation+of+stably+transformed+plants.">transient expression of fluorescent fusion proteins in tobacco plants and generation of stably transformed plants.</a> Nature protocols. 1, 2019-2025 (2006).</li><li>Rackham, O., Brown, C. M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Visualization+of+RNA-protein+interactions+in+living+cells:+FMRP+and+IMP1+interact+on+mRNAs.">Visualization of RNA-protein interactions in living cells: FMRP and IMP1 interact on mRNAs.</a> The EMBO journal. 23, 3346-3355 (2004).</li><li>Demidov, V. V. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Fast+complementation+of+split+fluorescent+protein+triggered+by+DNA+hybridization.">Fast complementation of split fluorescent protein triggered by DNA hybridization.</a> Proceedings of the National Academy of Sciences of the United States of America. 103, 2052-2056 (2006).</li><li>Shyu, Y. J., Suarez, C. D., Hu, C. D. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Visualization+of+ternary+complexes+in+living+cells+by+using+a+BiFC-based+FRET+assay.">Visualization of ternary complexes in living cells by using a BiFC-based FRET assay.</a> Nature. 3, 1693-1702 (2008).</li></ol>

Nessun conflitto di interessi dichiarati.

Saggio BiFC è un potente strumento per studiare le interazioni delle proteine. A differenza del tradizionale test Y2H, BiFC non solo permette la visualizzazione delle interazioni proteina-proteina, ma fornisce anche ulteriori informazioni del complesso proteico come la localizzazione sub-cellulare. Inoltre, è possibile rilevare le interazioni indirette finché le due proteine ​​candidato può essere portato abbastanza vicino da un terzo partner. Come ogni tecnologia, BiFC ha i suoi limiti. A causa della necessità...

<table border='1'>
	<tbody>
		<tr>
			<td>Name of the reagent</td>
			<td>Company</td>
			<td>Catalogue number</td>
		</tr>
		<tr>
			<td>Acetosyringone</td>
			<td>Sigma</td>
			<td>D134406</td>
		</tr>
		<tr>
			<td>MES hydrate</td>
			<td>Sigma</td>
			<td>M2933</td>
		</tr>
		<tr>
			<td>1 mL slip-tip tuberculin syringe</td>
			<td>BD</td>
			<td>309602</td>
		</tr>
	</tbody>
</table>

detection of protein interactions in plant using a gateway compatible bimolecular fluorescence complementation (bifc) system

Abbiamo sviluppato una tecnica BiFC per testare l&#39;interazione tra due proteine ​​in vivo. Ciò si ottiene dividendo una proteina fluorescente gialla (YFP) in due frammenti non si sovrappongono. Ogni frammento viene clonato in-frame ad un gene di interesse. Questi costrutti possono essere co-trasformato in Nicotiana benthamiana tramite trasformazione mediata da Agrobacterium, consentendo l&#39;espressione di proteine ​​di fusione di transito. La ricostituzione del segnale YFP si verifica solo quando le proteine ​​interagiscono inchiesta 1-7. Per testare e convalidare il interazioni proteina-proteina, BiFC possono essere utilizzati insieme con il lievito due ibridi (Y2H) test. Questo può rilevare le interazioni indirette che può essere trascurato nel Y2H. La tecnologia Gateway è una piattaforma universale che consente ai ricercatori di navetta il gene di interesse (GOI), in quanto espressione di molti e sistemi di analisi funzionale possibile 8,9. Sia l&#39;orientamento e la cornice di lettura può essere mantenuta senza l&#39;utilizzo di enzimi di restrizione o la legatura di rendere l&#39;espressione-ready cloni. Come risultato, si può eliminare tutte le re-sequencing misure per garantire risultati costanti nel corso degli esperimenti. Abbiamo creato una serie di vettori Gateway compatibile BiFC e Y2H che fornire ai ricercatori un facile da usare strumenti per eseguire test sia BiFC e Y2H 10. Qui, dimostriamo la facilità di utilizzo il nostro sistema BiFC per testare interazioni proteina-proteina in N. benthamiana piante.

Watch this Scientific Journal Video about Detection of Protein Interactions in Plant using a Gateway Compatible Bimolecular Fluorescence Complementation BiFC System at JoVE.com

Detection of Protein Interactions in Plant using a Gateway Compatible Bimolecular Fluorescence Complementation BiFC System

Abbiamo sviluppato una tecnica per testare interazioni proteina-proteina in pianta. Una proteina fluorescente gialla (YFP) è divisa in due frammenti non si sovrappongono. Ogni frammento viene clonato in-frame ad un gene di interesse attraverso il sistema Gateway, consentendo l&#39;espressione di proteine ​​di fusione. Ricostituzione del segnale YFP si verifica solo quando le proteine ​​interagiscono inchiesta.

Rilevamento delle interazioni proteiche in pianta utilizzando un gateway compatibile complementazione fluorescenza biomolecolare (BiFC) Sistema

We have developed a BiFC technique to test the interaction between two proteins in vivo. This is accomplished by splitting a yellow fluorescent protein ...

detection-protein-interactions-plant-using-gateway-compatible

Research

JoVE Journal

Biology

Detection of Protein Interactions in Plant using a Gateway Compatible Bimolecular Fluorescence Complementation (BiFC) System

25.2K Views.  University of Western Ontario. Abbiamo sviluppato una tecnica per testare interazioni proteina-proteina in pianta. Una proteina fluorescente gialla (YFP) è divisa in due frammenti non si sovrappongono. Ogni frammento viene clonato in-frame ad un gene di interesse attraverso il sistema Gateway, consentendo l'espressione di proteine ​​di fusione. Ricostituzione del segnale YFP si verifica solo quando le proteine ​​interagiscono inchiesta.

Video: Detection of Protein Interactions in Plant using a Gateway Compatible Bimolecular Fluorescence Complementation BiFC System

Rapid Homogeneous Detection of Biological Assays Using Magnetic Modulation Biosensing System

A magnetic modulation biosensing system (MMB) [1,2] rapidly and homogeneously detected biological targets at low concentrations without any washing or separation step. When the IL-8 target was present, a 'sandwich'-based assay attached magnetic beads with IL-8 capture antibody to streptavidin coupled fluorescent protein via the IL-8 target and a biotinylated IL-8 antibody. The magnetic beads are maneuvered into oscillatory motion by applying an alternating magnetic field gradient through two electromagnetic poles. The fluorescent proteins, which are attached to the magnetic beads are condensed into the detection area and their movement in and out of an orthogonal laser beam produces a periodic fluorescent signal that is demodulated using synchronous detection. The magnetic modulation biosensing system was previously used to detect the coding sequences of the non-structural Ibaraki virus protein 3 (NS3) complementary DNA (cDNA) [2]. The techniques that are demonstrated in this work for external manipulation and condensation of particles may be used for other applications, e.g. delivery of magnetically-coupled drugs in-vivo or enhancing the contrast for in-vivo imaging applications.

Magnetic modulation biosensing system is utilized to rapidly, sensitively and simply detect biological assays, such as DNA molecules and proteins.

Rapida rilevazione omogenea dei saggi biologici Utilizzando Magnetic biopercezione sistema di modulazione

A magnetic modulation biosensing system (MMB) [1,2] rapidly and homogeneously detected biological targets at low concentrations without any washing or ...

Ricerca

Biologia

Bimolecular Fluorescence Complementation (BiFC) Assay for Protein-Protein Interaction in Onion Cells Using the Helios Gene Gun

Investigation of gene function in diverse organisms relies on knowledge of how the gene products interact with each other in their normal cellular environment. The Bimolecular Fluorescence Complementation (BiFC) Assay1 allows researchers to visualize protein-protein interactions in living cells and has become an essential research tool. This assay is based on the facilitated association of two fragments of a fluorescent protein (GFP) that are each fused to a potential interacting protein partner. The interaction of the two protein partners would facilitate the association of the N-terminal and C-terminal fragment of GFP, leading to fluorescence. For plant researchers, onion epidermal cells are an ideal experimental system for conducting the BiFC assay because of the ease in obtaining and preparing onion tissues and the direct visualization of fluorescence with minimal background fluorescence. The Helios Gene Gun (BioRad) is commonly used for bombarding plasmid DNA into onion cells. We demonstrate the use of Helios Gene Gun to introduce plasmid constructs for two interacting Arabidopsis thaliana transcription factors, SEUSS (SEU) and LEUNIG HOMOLOG (LUH)2 and the visualization of their interactions mediated by BiFC in onion epidermal cells.

Bimolecular Fluorescence Complementation BiFC Assay for Protein-Protein Interaction in Onion Cells Using the Helios Gene Gun

This article illustrates how to properly use the BioRad Helios Gene Gun to introduce plasmid DNA into onion epidermal cells and how to test for protein-protein interactions in onion cells based on the principle of Bimolecular Fluorescence Complementation (BiFC)

Biomolecolare fluorescenza complementazione (BiFC) Assay per interazione proteina-proteina nelle cellule Cipolla Utilizzando la Helios Gun Gene

Investigation of gene function in diverse organisms relies on knowledge of how the gene products interact with each other in their normal cellular ...

In-vivo Detection of Protein-protein Interactions on Micro-patterned Surfaces

Unraveling the interaction network of molecules in-vivo is key to understanding the mechanisms that regulate cell function and metabolism. A multitude of methodological options for addressing molecular interactions in cells have been developed, but most of these methods suffer from being rather indirect and therefore hardly quantitative. On the contrary, a few high-end quantitative approaches were introduced, which however are difficult to extend to high throughput. To combine high throughput capabilities with the possibility to extract quantitative information, we recently developed a new concept for identifying protein-protein interactions (Schwarzenbacher et al., 2008). Here, we describe a detailed protocol for the design and the construction of this system which allows for analyzing interactions between a fluorophore-labeled protein ("prey") and a membrane protein ("bait") in-vivo. Cells are plated on micropatterned surfaces functionalized with antibodies against the bait exoplasmic domain. Bait-prey interactions are assayed via the redistribution of the fluorescent prey. The method is characterized by high sensitivity down to the level of single molecules, the capability to detect weak interactions, and high throughput capability, making it applicable as screening tool.

In-vivo Detection of Protein-protein Interactions on Micro-patterned Surfaces

This video shows experiments with subsequent analysis of protein-protein interactions by the use of micro-patterned surfaces. The approach offers the possibility to detect protein interactions in living cells and combines high throughput capabilities with the possibility to extract quantitative information.

In vivo di rilevamento di interazioni proteina-proteina su disegno micro, Superfici

Unraveling the interaction network of molecules in-vivo is key to understanding the mechanisms that regulate cell function and metabolism. A multitude of ...

Bimolecular Fluorescence Complementation

Defining the subcellular distribution of signaling complexes is imperative to understanding the output from that complex. Conventional methods such as immunoprecipitation do not provide information on the spatial localization of complexes. In contrast, BiFC monitors the interaction and subcellular compartmentalization of protein complexes. In this method, a fluororescent protein is split into amino- and carboxy-terminal non-fluorescent fragments which are then fused to two proteins of interest. Interaction of the proteins results in reconstitution of the fluorophore (Figure 1)1,2. A limitation of BiFC is that once the fragmented fluorophore is reconstituted the complex is irreversible3. This limitation is advantageous in detecting transient or weak interactions, but precludes a kinetic analysis of complex dynamics. An additional caveat is that the reconstituted flourophore requires 30min to mature and fluoresce, again precluding the observation of real time interactions4. BiFC is a specific example of the protein fragment complementation assay (PCA) which employs reporter proteins such as green fluorescent protein variants (BiFC), dihydrofolate reductase, b-lactamase, and luciferase to measure protein:protein interactions5,6. Alternative methods to study protein:protein interactions in cells include fluorescence co-localization and F&ouml;rster resonance energy transfer (FRET)7. For co-localization, two proteins are individually tagged either directly with a fluorophore or by indirect immunofluorescence. However, this approach leads to high background of non-interacting proteins making it difficult to interpret co-localization data. In addition, due to the limits of resolution of confocal microscopy, two proteins may appear co-localized without necessarily interacting. With BiFC, fluorescence is only observed when the two proteins of interest interact. FRET is another excellent method for studying protein:protein interactions, but can be technically challenging. FRET experiments require the donor and acceptor to be of similar brightness and stoichiometry in the cell. In addition, one must account for bleed through of the donor into the acceptor channel and vice versa. Unlike FRET, BiFC has little background fluorescence, little post processing of image data, does not require high overexpression, and can detect weak or transient interactions. Bioluminescence resonance energy transfer (BRET) is a method similar to FRET except the donor is an enzyme (e.g. luciferase) that catalyzes a substrate to become bioluminescent thereby exciting an acceptor. BRET lacks the technical problems of bleed through and high background fluorescence but lacks the ability to provide spatial information due to the lack of substrate localization to specific compartments8. Overall, BiFC is an excellent method for visualizing subcellular localization of protein complexes to gain insight into compartmentalized signaling.

The subcellular localization of proteins is important in determining the spatio-temporal regulation of cell signaling. Here, we describe bimolecular fluorescence complementation (BiFC) as a straightforward method for monitoring the spatial interactions of proteins in the cell.

Bimolecolari complementazione fluorescenza

Defining the subcellular distribution of signaling complexes is imperative to understanding the output from that complex. Conventional methods such as ...

A Protocol for the Identification of Protein-protein Interactions Based on 15N Metabolic Labeling, Immunoprecipitation, Quantitative Mass Spectrometry and Affinity Modulation

Protein-protein interactions are fundamental for many biological processes in the cell. Therefore, their characterization plays an important role in current research and a plethora of methods for their investigation is available1. Protein-protein interactions often are highly dynamic and may depend on subcellular localization, post-translational modifications and the local protein environment2. Therefore, they should be investigated in their natural environment, for which co-immunoprecipitation approaches are the method of choice3. Co-precipitated interaction partners are identified either by immunoblotting in a targeted approach, or by mass spectrometry (LC-MS/MS) in an untargeted way. The latter strategy often is adversely affected by a large number of false positive discoveries, mainly derived from the high sensitivity of modern mass spectrometers that confidently detect traces of unspecifically precipitating proteins. A recent approach to overcome this problem is based on the idea that reduced amounts of specific interaction partners will co-precipitate with a given target protein whose cellular concentration is reduced by RNAi, while the amounts of unspecifically precipitating proteins should be unaffected. This approach, termed QUICK for QUantitative Immunoprecipitation Combined with Knockdown4, employs Stable Isotope Labeling of Amino acids in Cell culture (SILAC)5 and MS to quantify the amounts of proteins immunoprecipitated from wild-type and knock-down strains. Proteins found in a 1:1 ratio can be considered as contaminants, those enriched in precipitates from the wild type as specific interaction partners of the target protein. Although innovative, QUICK bears some limitations: first, SILAC is cost-intensive and limited to organisms that ideally are auxotrophic for arginine and/or lysine. Moreover, when heavy arginine is fed, arginine-to-proline interconversion results in additional mass shifts for each proline in a peptide and slightly dilutes heavy with light arginine, which makes quantification more tedious and less accurate5,6. Second, QUICK requires that antibodies are titrated such that they do not become saturated with target protein in extracts from knock-down mutants.
Here we introduce a modified QUICK protocol which overcomes the abovementioned limitations of QUICK by replacing SILAC for 15N metabolic labeling and by replacing RNAi-mediated knock-down for affinity modulation of protein-protein interactions. We demonstrate the applicability of this protocol using the unicellular green alga Chlamydomonas reinhardtii as model organism and the chloroplast HSP70B chaperone as target protein7 (Figure 1). HSP70s are known to interact with specific co-chaperones and substrates only in the ADP state8. We exploit this property as a means to verify the specific interaction of HSP70B with its nucleotide exchange factor CGE19.

A Protocol for the Identification of Protein-protein Interactions Based on 15N Metabolic Labeling, Immunoprecipitation, Quantitative Mass Spectrometry and Affinity Modulation

We present a variation of the QUICK (QUantitative Immunoprecipitation Combined with Knockdown) approach that was introduced previously to distinguish between true and false protein-protein interactions. Our approach is based on 15N metabolic labeling, the modulation of affinities of protein-protein interactions by the presence/absence of ATP, immunoprecipitation, and quantitative mass spectrometry.

Un protocollo per l&#39;identificazione di interazioni proteina-proteina Sulla base di<sup&gt; 15</sup&gt; N marcatura metabolica, immunoprecipitazione, Spettrometria di massa quantitativa e di affinità di modulazione

Protein-protein interactions are fundamental for many biological processes in the cell. Therefore, their characterization plays an important role in ...

Flow Cytometric Analysis of Bimolecular Fluorescence Complementation: A High Throughput Quantitative Method to Study Protein-protein Interaction

Among methods to study protein-protein interaction inside cells, Bimolecular Fluorescence Complementation (BiFC) is relatively simple and sensitive. BiFC is based on the production of fluorescence using two non-fluorescent fragments of a fluorescent protein (Venus, a Yellow Fluorescent Protein variant, is used here). Non-fluorescent Venus fragments (VN and VC) are fused to two interacting proteins (in this case, AKAP-Lbc and PDE4D3), yielding fluorescence due to VN-AKAP-Lbc-VC-PDE4D3 interaction and the formation of a functional fluorescent protein inside cells.
BiFC provides information on the subcellular localization of protein complexes and the strength of protein interactions based on fluorescence intensity. However, BiFC analysis using microscopy to quantify the strength of protein-protein interaction is time-consuming and somewhat subjective due to heterogeneity in protein expression and interaction. By coupling flow cytometric analysis with BiFC methodology, the fluorescent BiFC protein-protein interaction signal can be accurately measured for a large quantity of cells in a short time. Here, we demonstrate an application of this methodology to map regions in PDE4D3 that are required for the interaction with AKAP-Lbc. This high throughput methodology can be applied to screening factors that regulate protein-protein interaction.

Flow cytometric analysis of Bimolecular Fluorescence Complementation provides a high throughput quantitative method to study protein-protein interaction. This methodology can be applied to mapping protein binding sites and for screening factors that regulate protein-protein interaction.

L&#39;analisi citofluorimetrica di bimolecular Complementation Fluorescenza: A High Throughput Metodo quantitativo per studiare l&#39;interazione proteina-proteina

Among methods to study protein-protein interaction inside cells, Bimolecular Fluorescence Complementation (BiFC) is relatively simple and sensitive. BiFC ...

Protein-protein Interactions Visualized by Bimolecular Fluorescence Complementation in Tobacco Protoplasts and Leaves

Many proteins interact transiently with other proteins or are integrated into multi-protein complexes to perform their biological function. Bimolecular fluorescence complementation (BiFC) is an in vivo method to monitor such interactions in plant cells. In the presented protocol the investigated candidate proteins are fused to complementary halves of fluorescent proteins and the respective constructs are introduced into plant cells via agrobacterium-mediated transformation. Subsequently, the proteins are transiently expressed in tobacco leaves and the restored fluorescent signals can be detected with a confocal laser scanning microscope in the intact cells. This allows not only visualization of the interaction itself, but also the subcellular localization of the protein complexes can be determined. For this purpose, marker genes containing a fluorescent tag can be coexpressed along with the BiFC constructs, thus visualizing cellular structures such as the endoplasmic reticulum, mitochondria, the Golgi apparatus or the plasma membrane. The fluorescent signal can be monitored either directly in epidermal leaf cells or in single protoplasts, which can be easily isolated from the transformed tobacco leaves. BiFC is ideally suited to study protein-protein interactions in their natural surroundings within the living cell. However, it has to be considered that the expression has to be driven by strong promoters and that the interaction partners are modified due to fusion of the relatively large fluorescence tags, which might interfere with the interaction mechanism. Nevertheless, BiFC is an excellent complementary approach to other commonly applied methods investigating protein-protein interactions, such as coimmunoprecipitation, in vitro pull-down assays or yeast-two-hybrid experiments.

Formation of protein complexes in vivo can be visualized by bimolecular fluorescence complementation. Interaction partners are fused to complementary parts of fluorescent tags and transiently expressed in tobacco leaves, resulting in a reconstituted fluorescent signal upon close proximity of the two proteins.

Interazioni proteina-proteina visualizzati tramite bimolecular complementazione fluorescenza in protoplasti di tabacco e foglie

Many proteins interact transiently with other proteins or are integrated into multi-protein complexes to perform their biological function. Bimolecular ...

Investigating Protein-protein Interactions in Live Cells Using Bioluminescence Resonance Energy Transfer

Assays based on Bioluminescence Resonance Energy Transfer (BRET) provide a sensitive and reliable means to monitor protein-protein interactions in live cells. BRET is the non-radiative transfer of energy from a 'donor' luciferase enzyme to an 'acceptor' fluorescent protein. In the most common configuration of this assay, the donor is Renilla reniformis luciferase and the acceptor is Yellow Fluorescent Protein (YFP). Because the efficiency of energy transfer is strongly distance-dependent, observation of the BRET phenomenon requires that the donor and acceptor be in close proximity. To test for an interaction between two proteins of interest in cultured mammalian cells, one protein is expressed as a fusion with luciferase and the second as a fusion with YFP. An interaction between the two proteins of interest may bring the donor and acceptor sufficiently close for energy transfer to occur. Compared to other techniques for investigating protein-protein interactions, the BRET assay is sensitive, requires little hands-on time and few reagents, and is able to detect interactions which are weak, transient, or dependent on the biochemical environment found within a live cell. It is therefore an ideal approach for confirming putative interactions suggested by yeast two-hybrid or mass spectrometry proteomics studies, and in addition it is well-suited for mapping interacting regions, assessing the effect of post-translational modifications on protein-protein interactions, and evaluating the impact of mutations identified in patient DNA.

Interactions between proteins are fundamental to all cellular processes. Using Bioluminescence Resonance Energy Transfer, the interaction between a pair of proteins can be monitored in live cells and in real time. Furthermore, the effects of potentially pathogenic mutations can be assessed.

Indagare interazioni proteina-proteina in cellule vive utilizzando il trasferimento bioluminescenza Resonance Energy

Assays based on Bioluminescence Resonance Energy Transfer (BRET) provide a sensitive and reliable means to monitor protein-protein interactions in live ...

Determination of Protein-ligand Interactions Using Differential Scanning Fluorimetry

A wide range of methods are currently available for determining the dissociation constant between a protein and interacting small molecules. However, most of these require access to specialist equipment, and often require a degree of expertise to effectively establish reliable experiments and analyze data. Differential scanning fluorimetry (DSF) is being increasingly used as a robust method for initial screening of proteins for interacting small molecules, either for identifying physiological partners or for hit discovery. This technique has the advantage that it requires only a PCR machine suitable for quantitative PCR, and so suitable instrumentation is available in most institutions; an excellent range of protocols are already available; and there are strong precedents in the literature for multiple uses of the method. Past work has proposed several means of calculating dissociation constants from DSF data, but these are mathematically demanding. Here, we demonstrate a method for estimating dissociation constants from a moderate amount of DSF experimental data. These data can typically be collected and analyzed within a single day. We demonstrate how different models can be used to fit data collected from simple binding events, and where cooperative binding or independent binding sites are present. Finally, we present an example of data analysis in a case where standard models do not apply. These methods are illustrated with data collected on commercially available control proteins, and two proteins from our research program. Overall, our method provides a straightforward way for researchers to rapidly gain further insight into protein-ligand interactions using DSF.

Differential scanning fluorimetry is a widely used method for screening libraries of small molecules for interactions with proteins. Here, we present a straightforward method to extend these analyses to provide an estimate of the dissociation constant between a small molecule and its protein partner.

Determinazione delle interazioni proteina-ligando Utilizzo scansione differenziale Fluorimetria

A wide range of methods are currently available for determining the dissociation constant between a protein and interacting small molecules. However, most ...

Determining Membrane Protein Topology Using Fluorescence Protease Protection (FPP)

The correct topology and orientation of integral membrane proteins are essential for their proper function, yet such information has not been established for many membrane proteins. A simple technique called fluorescence protease protection (FPP) is presented, which permits the determination of membrane protein topology in living cells. This technique has numerous advantages over other methods for determining protein topology, in that it does not require the availability of multiple antibodies against various domains of the membrane protein, does not require large amounts of protein, and can be performed on living cells. The FPP method employs the spatially confined actions of proteases on the degradation of green fluorescent protein (GFP) tagged membrane proteins to determine their membrane topology and orientation. This simple approach is applicable to a wide variety of cell types, and can be used to determine membrane protein orientation in various subcellular organelles such as the mitochondria, Golgi, endoplasmic reticulum and components of the endosomal/recycling system. Membrane proteins, tagged on either the N-termini or C-termini with a GFP fusion, are expressed in a cell of interest, which is subject to selective permeabilization using the detergent digitonin. Digitonin has the ability to permeabilize the plasma membrane, while leaving intracellular organelles intact. GFP moieties exposed to the cytosol can be selectively degraded through the application of protease, whereas GFP moieties present in the lumen of organelles are protected from the protease and remain intact. The FPP assay is straightforward, and results can be obtained rapidly.

Determining Membrane Protein Topology Using Fluorescence Protease Protection FPP

Here, we present a protocol to determine the orientation and topology of integral membrane proteins in living cells. This simple protocol relies on selective protease sensitivity of chimeras between the protein of interest and GFP.

Determinazione Membrane Protein Topologia Usando fluorescenza Protease Protection (FPP)

The correct topology and orientation of integral membrane proteins are essential for their proper function, yet such information has not been established ...