Name: a complete method for evaluating the performance of photocatalysts for the degradation of antibiotics in environmental remediation
Uploaded: 2022-10-06T14:10:00
Description: Watch this Scientific Journal Video about A Complete Method for Evaluating the Performance of Photocatalysts for the Degradation of Antibiotics in Environmental Remediation at JoVE.com

This work was supported by the National Natural Science Foundation of China (21606180), and the Natural Science Basic Research Program of Shaanxi (Program No. 2019JM-589).

1. Preparation of the BrSubPc
NOTE: The BrSubPc sample was prepared according to a previously published work36. The reaction is carried out in a double-row tube vacuum line system, and the reaction process is strictly controlled under water-free and oxygen-free conditions.
<ol>
	<li>Pre-treatment of raw materials
	<ol>
		<li>Weigh 2 g of o-dicyanobenzene, dry it in a vacuum oven for 24 h, take it out and then grind it carefully in an agate mortar.</li...

In this paper, we present a complete methodology for evaluating the catalytic performance of photocatalytic materials, including the preparation of catalysts, the investigation of factors affecting photocatalysis, and the performance of catalyst recycling. This evaluation method is universal and applicable to all photocatalytic material performance evaluations.
In terms of material preparation methods, many schemes have been reported for the preparation of rhombic dodecahedral Ag3PO...

Tetracyclines (TCs) are common antibiotics that provide effective protection against bacterial infections and are widely used in animal husbandry, aquaculture, and disease prevention1,2. They are widely distributed in water due to their overuse and improper application in the past decades, as well as the discharge of industrial wastewater3. This has caused severe environmental pollution and serious risks to human health; for example, the excessive presence of TCs in the aqueous environment can negatively affect microbial community distribution and bacterial resistance, leading to ecological imbalances, mainly due to the highly hydrophilic and bioaccumulative nature of antibiotics, as well as a certain level of bioactivity and stability4,5,6. Due to the hyper-stability of TC in the environment, it is difficult to break down naturally; therefore, many methods have been developed, including biological, physicochemical, and chemical treatments7,8,9. Biological treatments are highly efficient and low-cost10,11. However, because they are toxic to microorganisms, they do not effectively degrade and mineralize antibiotic molecules in water12. Although physicochemical methods can remove antibiotics from wastewater directly and quickly, this method only converts the antibiotic molecules from the liquid phase to the solid phase, does not completely degrade them, and is too costly13.
In contrast to conventional methods, semiconductor photocatalysis has been widely used for the degradation of pollutants in the past decades due to its efficient catalytic degradation properties14. For example, the noble metal-free magnetic FexMny catalyst of Li et al. achieved efficient photocatalytic oxidation of a variety of antibiotic molecules in water without the use of any oxidant15. Yan et al. reported the in situ synthesis of lily-like NiCo2O4 nanosheets on waste biomass-derived carbon to achieve efficient photocatalytic removal of phenolic pollutants from water16. The technology relies on a semiconductor catalyst excited by light to generate photogenerated electrons (e-) and holes (h+)17. The photogenerated e- and h+ will be converted into superoxide anion radicals (O2-) or hydroxyl radicals (OH-) by reacting with absorbed O2 and H2O, and these oxidatively active species oxidize and decompose organic pollutant molecules in water into CO2 and H2O and other smaller organic molecules18,19,20. However, there is no unified field standard for photocatalyst performance evaluation. The evaluation of a material&#39;s photocatalytic performance should be investigated in terms of the catalyst preparation process, environmental conditions for optimal catalytic performance, catalyst recycling performance, etc. Ag3PO4, with its prominent photocatalytic ability, has triggered substantial concern in environmental remediation. This new photocatalyst achieves quantum efficiencies of up to 90 % at wavelengths greater than 420 nm, which is significantly higher than previously reported values21. However, the severe photo corrosion and unsatisfactory electron-hole separation rate of Ag3PO4 limit its wide application22. Therefore, various attempts have been made to overcome these drawbacks, such as shape optimization23, ion doping24, and heterostructure building25,26,27. In this paper, Ag3PO4 was modified using morphology control as well as heterojunction engineering. First, rhombic dodecahedral Ag3PO4 crystals with high surface energy were prepared by solvent phase synthesis at room temperature under ambient pressure. Then, organic supramolecular BrSubphthalocyanine (BrSubPc), which can act as both electron acceptor and electron donor, was self-assembled on the silver phosphate surface by the solvothermal method28,29,30,31,32,33,34,35. The photocatalytic performance of the prepared materials was evaluated by investigating the effect of different environmental factors on the photocatalytic performance of the prepared samples to degrade trace amounts of tetracycline in water. This paper provides a reference for the systematic evaluation of the photocatalytic performance of the materials, which is of significance for the future development of photocatalytic materials for practical applications in environmental remediation.

<table border="1" fo:keep-together.within-page="1" fo:keep-with-next.within-page="always">
	<tbody>
		<tr>
			<td>300 W xenon lamp</td>
			<td>CeauLight</td>
			<td>CEL-HXF300</td>
			<td></td>
		</tr>
		<tr>
			<td>AgNO3</td>
			<td>Aladdin Reagent (Shanghai) Co., Ltd.</td>
			<td>7783-99-5</td>
			<td></td>
		</tr>
		<tr>
			<td>Air Pump</td>
			<td>Samson Group Co.</td>
			<td>ACO-001</td>
			<td></td>
		</tr>
		<tr>
			<td>BBr3</td>
			<td>Bailingwei Technology Co., Ltd.</td>
			<td>10294-33-4</td>
			<td></td>
		</tr>
		<tr>
			<td>Constant temperature circulating water bath</td>
			<td>Beijing Changliu Scientific Instruments Co.</td>
			<td>HX-105</td>
			<td></td>
		</tr>
		<tr>
			<td>Dichloromethane</td>
			<td>Tianjin Kemiou Chemical Reagent Co., Ltd.</td>
			<td>75-09-2</td>
			<td></td>
		</tr>
		<tr>
			<td>Ethanol</td>
			<td>Tianjin Fuyu Fine Chemical Co., Ltd.</td>
			<td>64-17-5</td>
			<td></td>
		</tr>
		<tr>
			<td>Fourier-transform infrared</td>
			<td>Bruker</td>
			<td>Vector002</td>
			<td></td>
		</tr>
		<tr>
			<td>Hexane</td>
			<td>Tianjin Kemiou Chemical Reagent Co., Ltd.</td>
			<td>110-54-3</td>
			<td></td>
		</tr>
		<tr>
			<td>HNO3</td>
			<td>Aladdin Reagent (Shanghai) Co., Ltd.</td>
			<td>7697-37-2</td>
			<td></td>
		</tr>
		<tr>
			<td>ICP-OES</td>
			<td>Aglient</td>
			<td>5110</td>
			<td></td>
		</tr>
		<tr>
			<td>K2HPO4</td>
			<td>Aladdin Reagent (Shanghai) Co., Ltd.</td>
			<td>16788-57-1</td>
			<td></td>
		</tr>
		<tr>
			<td>Magnesium Sulfate</td>
			<td>Tianjin Kemiou Chemical Reagent Co., Ltd.</td>
			<td>10034-99-8</td>
			<td></td>
		</tr>
		<tr>
			<td>Methanol</td>
			<td>Tianjin Kemiou Chemical Reagent Co., Ltd.</td>
			<td>67-56-1</td>
			<td></td>
		</tr>
		<tr>
			<td>NaOH</td>
			<td>Aladdin Reagent (Shanghai) Co., Ltd.</td>
			<td>1310-73-2</td>
			<td></td>
		</tr>
		<tr>
			<td>NH4NO3</td>
			<td>Sinopharm Group Chemical Reagent Co., Ltd.</td>
			<td>6484-52-2</td>
			<td></td>
		</tr>
		<tr>
			<td>o-dichlorobenzene</td>
			<td>Tianjin Fuyu Fine Chemical Co., Ltd.</td>
			<td>95-50-1</td>
			<td></td>
		</tr>
		<tr>
			<td>o-dicyanobenzene</td>
			<td>Sinopharm Group Chemical Reagent Co., Ltd.</td>
			<td>91-15-6</td>
			<td></td>
		</tr>
		<tr>
			<td>Scanning electron microscopy</td>
			<td>JEOL</td>
			<td>JSM-6390</td>
			<td></td>
		</tr>
		<tr>
			<td>Trichloromethane</td>
			<td>Tianjin Kemiou Chemical Reagent Co., Ltd.</td>
			<td>67-66-3</td>
			<td></td>
		</tr>
		<tr>
			<td>Ultraviolet-visible Spectrophotometer</td>
			<td>Shimadzu</td>
			<td>UV-3600</td>
			<td></td>
		</tr>
		<tr>
			<td>X-ray diffractometer</td>
			<td>Rigaku</td>
			<td>D/max-IIIA</td>
			<td></td>
		</tr>
	</tbody>
</table>

a complete method for evaluating the performance of photocatalysts for the degradation of antibiotics in environmental remediation

Various antibiotics such as tetracycline, aureomycin, amoxicillin, and levofloxacin are found in large quantities in groundwater and soil systems, potentially leading to the development of resistant and multi-drug resistant bacteria, posing a threat to humans, animals, and environmental systems. Photocatalytic technology has attracted keen interest due to its rapid and stable treatment and direct use of solar energy. However, most studies evaluating the performance of semiconductor catalysts for the photocatalytic degradation of organic pollutants in water are currently incomplete. In this paper, a complete experimental protocol is designed to comprehensively evaluate the photocatalytic performance of semiconductor catalysts. Herein, rhombic dodecahedral silver phosphate was prepared by a simple solvent phase synthesis method at room temperature and atmospheric pressure. BrSubphthalocyanine/Ag3PO4 heterojunction materials were prepared by the solvothermal method. The catalytic performance of as-prepared materials for the degradation of tetracycline was evaluated by studying different influencing factors such as catalyst dosage, temperature, pH, and anions at atmospheric pressure using a 300 W xenon lamp as a simulated solar light source and a light intensity of 350 mW/cm2. Compared with the first cycle, the constructed BrSubphthalocyanine/Ag3PO4 maintained 82.0% of the original photocatalytic activity after five photocatalytic cycles, while the pristine Ag3PO4 maintained only 28.6%. The stability of silver phosphate samples was further tested by a five-cycle experiment. This paper provides a complete process for evaluating the catalytic performance of semiconductor catalysts in the laboratory for the development of semiconductor catalysts with potential for practical applications.

The rhombic dodecahedron Ag3PO4 was successfully synthesized using this solvent phase synthesis method. This is confirmed by the SEM images shown in Figure 1A,B. According to the SEM analysis, the average diameter of the rhombic dodecahedral structure was found to be between 2-3 &#181;m. The pristine BrSubPc microcrystals show a large irregular flake structure (Figure 1C). In the composite sample, the titanium dioxide still...

Watch this Scientific Journal Video about A Complete Method for Evaluating the Performance of Photocatalysts for the Degradation of Antibiotics in Environmental Remediation at JoVE.com

A Complete Method for Evaluating the Performance of Photocatalysts for the Degradation of Antibiotics in Environmental Remediation

Presented here is a protocol to explore a universal set of experimental procedures for comprehensive laboratory evaluation of photocatalysts in the field of environmental purification, using the example of photocatalytic removal of antibiotic organic pollutant molecules from water by phthalocyanine sensitized silver phosphate composites.

Various antibiotics such as tetracycline, aureomycin, amoxicillin, and levofloxacin are found in large quantities in groundwater and soil systems, ...

Research

JoVE Journal

Environment

Physical, Chemical and Biological Characterization of Six Biochars Produced for the Remediation of Contaminated Sites

The physical and chemical properties of biochar vary based on feedstock sources and production conditions, making it possible to engineer biochars with ...

A Whole Cell Bioreporter Approach to Assess Transport and Bioavailability of Organic Contaminants in Water Unsaturated Systems

Bioavailability of contaminants is a prerequisite for their effective biodegradation in soil. The average bulk concentration of a contaminant, however, is ...

A Bending Test for Determining the Atterberg Plastic Limit in Soils

The thread rolling test is the most commonly used method to determine the plastic limit (PL) in soils. It has been widely criticized, because a ...

A Flow-through Exposure System for Evaluating Suspended Sediments Effects on Aquatic Life

This paper describes the Fish Larvae and Egg Exposure System (FLEES). The flow-through exposure system is used to investigate the effects of suspended ...

Ecotoxicological Method with Marine Bacteria Vibrio anguillarum to Evaluate the Acute Toxicity of Environmental Contaminants

Ecotoxicological Method with Marine Bacteria Vibrio anguillarum to Evaluate the Acute Toxicity of Environmental Contaminants

Bacteria are an important component of the ecosystem, and microbial community alterations can have a significant effect on biogeochemical cycling and food ...

Comparison of Scale in a Photosynthetic Reactor System for Algal Remediation of Wastewater

An experimental methodology is presented to compare the performance of two different sized reactors designed for wastewater treatment. In this study, ...

Evaluating the Effect of Environmental Chemicals on Honey Bee Development from the Individual to Colony Level

The presence of pesticides in the beekeeping environment is one of the most serious problems that impacts the life of a honey bee. Pesticides can be ...

Extraction of Organochlorine Pesticides from Plastic Pellets and Plastic Type Analysis

Plastic resin pellets, categorized as microplastics (&#8804;5 mm in diameter), are small granules that can be unintentionally released to the environment ...

A Novel Method for the Pentosan Analysis Present in Jute Biomass and Its Conversion into Sugar Monomers Using Acidic Ionic Liquid

Recently, ionic liquids (ILs) are used for biomass valorization into valuable chemicals because of their remarkable properties such as thermal stability, ...

Experimental Protocol for Examining Behavioral Response Profiles in Larval Fish: Application to the Neuro-stimulant Caffeine

Fish models and behaviors are increasingly used in the biomedical sciences; however, fish have long been the subject of ecological, physiological and ...