Orthotopic Implantation of Patient-Derived Cancer Cells in Mice Recapitulates Advanced Colorectal Cancer

Summary

This protocol describes the orthotopic implantation of patient-derived cancer cells in the cecum wall of immunodeficient mice. The model recapitulates advanced colorectal cancer metastatic disease and allows for the evaluation of new therapeutic drugs in a clinically relevant scenario of lung and liver metastases.

Abstract

Over the last decade, more sophisticated preclinical colorectal cancer (CRC) models have been established using patient-derived cancer cells and 3D tumoroids. Since patient derived tumor organoids can retain the characteristics of the original tumor, these reliable preclinical models enable cancer drug screening and the study of drug resistance mechanisms. However, CRC related death in patients is mostly associated with the presence of metastatic disease. It is therefore essential to evaluate the efficacy of anti-cancer therapies in relevant in vivo models that truly recapitulate the key molecular features of human cancer metastasis. We have established an orthotopic model based on the injection of CRC patient-derived cancer cells directly into the cecum wall of mice. These tumor cells develop primary tumors in the cecum that metastasize to the liver and lungs, which is frequently observed in patients with advanced CRC. This CRC mouse model can be used to evaluate drug responses monitored by microcomputed tomography (µCT), a clinically relevant small-scale imaging method that can easily identify primary tumors or metastases in patients. Here, we describe the surgical procedure and the required methodology to implant patient-derived cancer cells in the cecum wall of immunodeficient mice.

Introduction

Colorectal cancer (CRC) is the second leading cause of cancer death worldwide¹. The ability to generate in vitro or in vivo tumor models derived from individual patient tumor cells has advanced precision medicine in oncology. Over the last decade, patient derived organoids (PDOs) or xenografts (PDXs) have been used by many research groups around the world². PDOs are multicellular in vitro structures that resemble the features of the original tumor tissue and can self-organize and self-renew³. These promising in vitro models can successfully be used for drug screening and facilitating translational research. On the other side, PDX models faithfully recapitulate the original CRC at all relevant levels, from histology to molecular traits and drug response^2,4.

In vivo PDX models are mostly grown as subcutaneous tumors in immunodeficient mice. Using this approach, PDXs have become the gold standard in cancer research, particularly for studying drug sensitivity or resistance. However, CRC related deaths are mostly associated with the presence of metastatic lesions in the liver, the lung, or the peritoneal cavity, and neither of the two approaches (PDO or PDX) can recapitulate the advanced clinical setting. In addition, the specific site of tumor growth has been shown to determine important biological characteristics that have an impact on drug efficacy and disease prognosis². Therefore, there is an urgent need to establish preclinical models that can be used to assess the efficacy of anticancer drugs in a clinically relevant metastatic setting⁶.

Microcomputed tomography (µCT) scanners can function as scaled-down clinical CT scanners, providing primary tumor and metastasis imaging in mice at a scaled image resolution proportional to that of CT images of cancer patients⁷. To counteract the poor soft tissue contrast of the µCT technique, radiological iodinated contrast agents can be used to improve the contrast and evaluate tumor burden. Using a dual contrast approach, oral and intraperitoneal iodine is administrated at different timings. The contrast administrated orally helps to define the limits between tumor tissue and cecum content inside the bowel.  On the other side, the contrast administered intraperitoneally allows for the identification of the external limits of the tumor mass, which frequently grows and invades the peritoneum⁸.

The manuscript describes a protocol to perform orthotopic implantation of patient-derived cancer cells in the cecum wall of immunodeficient mice, and the methodology to monitor intestinal tumor growth using µCT scanning. The present manuscript shows that the model recapitulates the clinical scenario of advanced intestinal tumors and metastatic disease in CRC patients that cannot be studied using PDO or PDXO models. Since orthotopic PDX models of CRC recapitulate the clinical scenario of CRC patients, we conclude that they are the best to date for testing the efficacy of anti-tumoral drugs in advanced intestinal tumors and metastatic disease.

Protocol

Written informed consent was obtained from all patients. The project was approved by the Research Ethics Committee of the Vall d'Hebron University Hospital, Barcelona, Spain (approval ID: PR(IR)79/2009 PR(AG)114/2014, PR(AG)18/2018). Human colon tissue samples consisted of biopsies from non-necrotic areas of primary adenocarcinomas or liver metastases, corresponding to patients with colon and rectal cancer who underwent tumor resection. Experiments were conducted following the European Union's animal care directive (86/609/EEC) and were approved by the Ethical Committee of Animal Experimentation of the VHIR-the Vall d'Hebron Research Institute (ID: 40/08 CEEA, 47/08/10 CEEA and 12/18 CEEA).

NOTE: Female NOD-SCID (NOD. CB17-Prkdcscid/NcrCrl) mice from 8 weeks-of-age were purchased from Charles River Laboratories.

1. Derivation of patient cells

1. Tumor extraction
   NOTE: The following procedure is performed in a biological cabinet at room temperature (RT) in the animal facility.
   1. Obtain tumor samples from the patients' surgeries or biopsies and from PDXs growing subcutaneously in mice.
   2. For the orthotopic injection, prepare the tumor cells from established subcutaneous PDX tumor models instead of tissue obtained directly from patients⁹.
   3. Generate PDX tumors by inoculating a suspension of 1 x 10⁵ tumor cells in phosphate buffered saline (PBS) (50 µL) mixed with Matrigel matrix (50 µL) subcutaneously in the flank of NOD-SCID mice².
      1. Measure tumor growth using a caliper every other day.
         NOTE: Importantly, our laboratory has generated a biobank of more than 350 PDX models. The CRC-PDX tumor models used in the protocol are established PDX models in the lab that have been amplified more than three passages in mice, and passed the inclusion/exclusion criteria with a positive result (Table 1).
   4. Euthanize the mice by cervical dislocation when subcutaneous tumors reach the maximum size established by the CEEA (1 cm of diameter), or when the animals reach endpoint criteria.
   5. Extract the tumor and carefully remove it from the skin and surrounding non-tumor tissue using scissors and forceps.
   6. Store the harvested tumors in PBS at 4 °C until the next step.
      NOTE: Dissociate the tumors in cell suspension as soon as possible after removal from their original location in the patients' lesions or subcutaneous xenografts in mice. Cell viability is significantly reduced 24 h after tissue removal, resulting in an inefficient implantation in recipient mice.
2. Cell preparation
   NOTE: The following procedure is performed in a biological cabinet at room temperature (RT) in the tissue culture room.
   1. Dissociate the tumors using a blade in a 10 cm culture plate with 1 mL of complete CoCSCM 6Ab medium (Table 2) (to make mincing easier). Place the homogeneous dissociated sample into a 15 mL conical tube.
   2. Add complete CoCSCM 6Ab medium to a final volume of 5 mL (use no more than 3 mL of dissociated sample in the same tube).
      NOTE: Primary CRC resected from patients are naturally contaminated with bacteria and fungus. It is essential to remove pathogens present in the original patient sample using a cocktail of six antibiotics (penicillin, streptomycin, fungizone, kanamycin, gentamycin, and nystatin). Injection of tumor cells contaminated with bacteria in immunodeficient mice may result in animal death.
   3. Incubate with 50 µL of DNase I (0.08 kU/mL) and 50 µL of collagenase (1.5 mg/mL) (digestion medium; Table 2) for 1 h at 37 °C in a cell culture incubator, at a 45° position. Mix the solution well every 15 min with a 5 mL pipette before the incubation.
      NOTE: Dissociate the tumor tissue and digest it by pipetting several times to obtain a single cell solution. This is essential for counting the cells before injecting in recipient mice and therefore achieving a homogeneous implantation of tumor cells.
   4. Add 5 mL of complete CoCSCM 6Ab medium and mix well with a 5 mL pipette.
   5. Sort the solution with a 100 µm cell strainer using a new sterile 50 mL tube.
   6. Spin the sorted cells at 500 x g for 8 min at RT.
   7. Aspirate the supernatant.
   8. Resuspend the pellet in 3 mL of 1x RBC lysis buffer solution.
   9. Incubate for 10 min at RT.
   10. Add 3 mL of complete CoCSCM 6Ab medium, pipette the sample, and spin at 500 x g for 10 min at RT. Aspirate the supernatant.
   11. Resuspend the pellet with 5-10 mL of complete CoCSCM 6Ab medium, and use a cell counter to calculate the total number of cells.
   12. Spin the cells at 500 x g for 10 min at RT, and resuspend in 10 mL of PBS.
   13. Resuspend the pellet to obtain a concentration of 20 x 10⁶ cells/mL, and mix well to obtain a homogeneous cell suspension.
   14. Prepare 29 G syringes (0.5 mL U 100 needle, 0.33 mm [29 G] x 12.7 mm) for cecum injection in the tissue culture (one syringe/mouse). Load 50 µL of the tumor cell suspension (1 x 10⁶ cells/injection) into the syringe and keep it on ice. Ensure that air bubbles are removed from the cell suspension.
       NOTE: Eliminating air bubbles when the tumor cells are loaded in the syringe is essential to avoid injection of an excessive volume in the cecum wall, which could result in tissue rupture and sample loss. It is imperative to mix the cell suspension well when loading the syringe to avoid uneven tumor size among mice in the same experiment.

2. Orthotopic injection in cecum

NOTE: The following procedure is performed on a bench in a specific pathogen free (SPF) room at the animal facility. The equipment used is previously cleaned and sterilized. In addition, it is sterilized again in a portable sterilizer between individuals or zones in the animal facility.

1. Clean the surgical site by spraying with disinfecting detergent and wiping.
2. Depilate the mice abdomen using a mouse hair removal machine.
3. Place the mouse in a supine position. Use 2% isoflurane to anesthetize the animal. Confirm the effect of anesthesia by gently pinching the extremity and observing the absence of stimulation.
4. Place a 50-100 µL drop of veterinary ointment (3 mg/g Lacryvisc) in the eyes to prevent dryness during anesthesia.
5. Disinfect the mouse abdomen by scrubbing with chlorhexidine or povidone-iodine several times in a circular motion.
6. Make a 1 cm longitudinal incision over the lower abdomen using surgery scissors. Carefully separate the skin to each site to present the peritoneum that is under the skin.
7. Make a 0.5-1 cm incision in the peritoneum membrane, big enough to exteriorize the cecum.
   NOTE: Exteriorize the cecum without excessively manipulating the internal organs, which could dramatically increase the lethality of the procedure.
8. Carefully isolate the cecum from the mouse using a pre-cut, sterile gauze.
9. Moisten the cecum with saline solution throughout the whole procedure.
10. Immobilize the cecum by carefully taking hold of it with forceps, and introduce the needle superficially into the cecum wall. Avoid capillaries and vessels in the injection site. Remove bubbles from the cell suspension.
11. Inject the whole 50µL of tumor cell suspension slowly. It usually takes around 10 s to administer. Avoid perforating the cecum lumen with the needle, as this results in the elimination of the tumor cell suspension from the body through intestinal peristalsis.
    NOTE: Injecting the tumor cell suspension in the cecum of the mice is the most challenging step of the entire procedure. A bright light focused on the injection site and a magnifying loupe should be used in this part of the protocol. Introduce the needle parallel to the cecum surface. The cecum is a very fragile tissue; therefore, immobilization of the cecum should be performed using surgical forceps and by applying gentle pressure to avoid tissue rupture resulting in hemorrhage. Successful implantation results in a white bubble (pellet of cells) in the cecum wall. If the bubble cannot be visualized, it may indicate that the cecum has been perforated and the cells have ended in the cecum lumen, resulting in their clearance by the intestinal tract.
12. After injection, slowly remove the needle from the cecum and apply gentle pressure on the injection site with a cotton-tipped applicator, to avoid tumor cells escaping and reduce slight bleeding.
13. Clean the cecum with saline solution to remove any debris.
14. Return the cecum back into the abdomen of the animal.
15. Close the peritoneum using 5/0 sutures.
16. Close the skin of the abdomen using 5/0 sutures.
17. Administer post-operative antibiotics (100 mg/kg amoxicillin or 20 mg/kg enrofloxacin) and analgesics (5 mg/mL metacam/meloxicam) by subcutaneous injection. Place the mice on a heating pad and keep them there until they have fully recovered. Then, return them to the cage with other animals.

3. Evaluation of orthotopic tumor growth using µCT scanning

NOTE: The following procedure is performed in the preclinical imaging platform (PIP) from the animal facility.

1. Perform all animal procedures following institutional ethical committee regulations.
2. Start monitoring the tumor volume by µCT 2 weeks after cell injection, and every week thereafter.
3. Freshly dilute the contrast agent iopamiro (300 mg/mL) in saline solution, in a ratio of 3:1 for both doses. Administer 300 mL of iopamiro by oral gavage.
   NOTE: Due to the poor soft tissue contrast of the µCT, a contrast agent is recommended to improve the sensitivity of the technique. The protocol includes an oral administration of an iodine-based agent (iopamiro) to delimitate the intraluminal tumor burden, and a secondary intraperitoneal administration of the same agent to define the tumor burden in the visceral face of the intestine. Pilot experiments have been previously performed to determine the exact time that the contrast agent needs to arrive to the cecum of mice before its elimination. In the case of iopamiro, it is around 2 h.
4. After 2 h, administer an intraperitoneal injection of 300 mL of previously diluted iopamiro. The administration helps to define the tumor limits in the parietal face.
5. Anesthetize the animals using 2% isoflurane.
6. After confirming that the animal is correctly anesthetized by pinching the foot of the mouse, place the animal in the scanning bed of the µCT. The best position is supine (face up).
7. In the control software, start the live mode (fluoroscopy mode) to place the abdominal area into the field of view (FOV) of the scanner. To do that, move the bed forward and backward and laterally until the desired position is achieved. Rotate the X-ray tube and the detector 90°, and move the scanning bed in the y-axis to center the animal completely.
8. Use the following parameters for the µCT scan images: 30 mm FOV, 26 s of acquisition time, 90 kV of current voltage, and 200 µA of current amperage, using an FX µCT imaging system.
9. Return the animals to their cages for recovery when the scan is finished. Provide thermal support and monitor the animals until they recover from anesthesia before returning to housing.
10. The µCT acquisition yields a file 250 Mb in size for each scan. The created data files have a VOX format. In order to make them accessible for any imaging analysis software, convert the files to DICOM format using the database managing software of the µCT. Store the batch of created files in a portable hard disk in order to analyze them using any computer with available imaging software.
    NOTE: During image analysis, the cecum is localized as a dilated bowel with a radiodense content (iopamiro), frequently in the left side of the caudal abdomen. In the visceral flexure of the cecum, a wall thickening is observed, compared to the adjacent intestinal regions. The thickening corresponds to tumor growth.
11. Once the tumor is localized, find the highest diameter in the different views (axial, coronal, and sagittal). Measure these three axes and calculate the tumor volume following the ellipsoid formula: volume = 4/3π x (x-semiaxis x y-semiaxis x z-semiaxis)¹⁰.

4. Therapeutic intervention in mice bearing orthotopic tumors

1. Monitor the mice bearing orthotopic tumors weekly.
2. When a tumor µCT scan signal is detected in most of the mice, perform another µCT scan the following week to confirm the presence of the tumor.
   NOTE: The time to start the treatment depends on the PDX model used, and varies from 3-12 weeks after tumor cell inoculation in the cecum.
3. Randomize the mice in four groups: a vehicle group (n = 10-15 mice), a testing drug group (n = 10-15 mice), a standard of care chemotherapy group (n = 10-15 mice), and a combination treatment group (n = 10-15 mice).
4. Treat the mice intraperitoneally with saline (vehicle group), the testing drug (20 mg/kg) (testing drug group), irinotecan (50 mg/kg) (standard of care group), or the testing drug (20 mg/kg) with irinotecan (50 mg/kg) (combination treatment group). Perform the administration once a week until the end of the experiment.
5. Monitor the tumor growth weekly by µCT scanning throughout the course of the experiment.
6. At the end of the experiment, euthanize the mice by cervical dislocation and collect livers, lungs, and any other possible lesions in other organs.
7. Include the tissue samples in cassettes and incubate them in 4% formalin overnight. Use intestine tissue from a mouse without a tumor in the cecum as a control.
8. Remove the cassettes from formalin and incubate with 70% ethanol for at least 3 h.
9. Embed the cassettes with paraffin, using histopathology facility standard protocols.
10. Perform hematoxylin and eosin (H&E) staining from the cecum, liver, and lung, using histopathology facility standard protocols.

Results

Mice orthotopically implanted with patient-derived cancer cells were monitored weekly by µCT scanning. At the end of the experiment, the animals were euthanized. Intestines, ceca (Figure 1A,B), livers, lungs, and any other possible lesion were collected, included in a cassette, and fixed with 4% formalin overnight. Intestine tissue from a mouse without a tumor in the cecum was used as a control (Figure 1C). Finally, cassettes were chan...

Discussion

Over the last few decades, many new anti-cancer therapies have been developed and tested in patients with different tumor types, including colorectal cancer (CRC). Although promising results in preclinical models have been observed in many cases, the therapeutic efficacy in patients with advanced metastatic CRC has been frequently limited. Therefore, there is an urgent need for preclinical models that allow for testing the efficacy of new therapeutic drugs in a clinically relevant metastatic scenario.

Materials

Name	Company	Catalog Number	Comments
REAGENT
Apo-Transferrin	MERCK LIFE SCIENCE S.L.U.	T1147-500MG
B27 Supplement	Life Technologies S.A (Spain)	17504044
Chlorhexidine Aqueous Solution 2%	DH MATERIAL MÉDICO, S.L.	1111696250
Collagenase	MERCK LIFE SCIENCE S.L.U.	C0130-500MG
D-(+)-Glucose	MERCK LIFE SCIENCE S.L.U.	G6152
DMEM /F12	LIFE TECHNOLOGIES S.A.	21331-020
DNase I	MERCK LIFE SCIENCE S.L.U.	D4263-5VL
EGF	PEPRO TECH EC LTD.	AF-100-15-500 µg
FGF basic	PEPRO TECH EC LTD.	100-18B
Fungizone	Life Technologies S.A (Spain)	15290026
Gentamycin	LIFE TECHNOLOGIES S.A.	15750037
Heparin Sodium Salt	MERCK LIFE SCIENCE S.L.U.	H4784-250MG
Insulin	MERCK LIFE SCIENCE S.L.U.	I9278-5ML
Iopamiro
Isoflurane	-	-
Kanamycin	LIFE TECHNOLOGIES S.A.	15160047
L-Glutamine	LIFE TECHNOLOGIES S.A.	25030032
Matrigel Matrix	CULTEK, S.L.U.	356235/356234/354234
Metacam, 5 mg/mL	-	-
Non-essential amino acids	LIFE TECHNOLOGIES S.A.	11140035
Nystatin	MERCK LIFE SCIENCE S.L.U.	N4014-50MG
Pen/Strep	Life Technologies S.A (Spain)	15140122
Phosphate-buffered saline (PBS), sterile	Labclinics S.A	L0615-500
Progesterone	MERCK LIFE SCIENCE S.L.U.	P0130-25G
Putrescine	MERCK LIFE SCIENCE S.L.U.	P5780-5G
RBC Lysis Buffer	Labclinics S.A	00-4333-57
Sodium Pyruvate	LIFE TECHNOLOGIES S.A.	11360039
Sodium Selenite	MERCK LIFE SCIENCE S.L.U.	S5261-25G
ESSENTIAL SUPPLIES
8 weeks-old NOD.CB17-Prkdcscid/NcrCrl mice	-	-
BD Micro-Fine 0.5 ml U 100 needle 0.33 mm (29G) x 12.7 mm	BECTON DICKINSON, S.A.U.	320926
Blade #24	-	-
Cell Strainer 100 µm	Cultek, SLU	45352360
Forceps and Surgical scissors	-	-
Heating pad	-	-
Lacryvisc, 3 mg/g, ophthalmic gel	-	-
Surfasafe	-	-
Suture PROLENE 5-0	JOHNSON&JOHNSON S, A.	8720H
EQUIPMENT/SOFTWARE
Quantum FX µCT Imaging system	Perkin Elmer	Perkin Elmer	http://www.perkinelmer.com/es/product/quantum-gx-instrument-120-240-cls140083