This research was supported by NSF CAREER Award #1944791.

<ol>
	<li>Welch, J. D., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Selective+single+cell+isolation+for+genomics+using+microraft+arrays.">Selective single cell isolation for genomics using microraft arrays.</a> Nucleic Acids Research. 44 (17), 8292-8301 (2016).</li><li>Lim, J. W., Shin, K. S., Moon, J., Lee, S. K., Kim, T. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+microfluidic+platform+for+high-throughput+screening+of+small+mutant+libraries.">A microfluidic platform for high-throughput screening of small mutant libraries.</a> Analytical Chemistry. 88 (10), 5234-5242 (2016).</li><li>Ishii, S., Tago, K., Senoo, K. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Single-cell+analysis+and+isolation+for+microbiology+and+biotechnology:+Methods+and+applications.">Single-cell analysis and isolation for microbiology and biotechnology: Methods and applications.</a> Applied Microbiology and Biotechnology. 86 (5), 1281-1292 (2010).</li><li>Nichols, D., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Use+of+ichip+for+high-throughput+in+situ+cultivation+of+“uncultivable+microbial+species”.">Use of ichip for high-throughput in situ cultivation of “uncultivable microbial species”.</a> Applied and Environmental Microbiology. 76 (8), 2445-2450 (2010).</li><li>Oliver, J. D. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Recent+findings+on+the+viable+but+nonculturable+state+in+pathogenic+bacteria.">Recent findings on the viable but nonculturable state in pathogenic bacteria.</a> FEMS Microbiology Reviews. 34 (4), 415-425 (2010).</li><li>Zhao, X., Zhong, J., Wei, C., Lin, C. W., Ding, T. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Current+perspectives+on+viable+but+nonculturable+state+in+foodborne+pathogens.">Current perspectives on viable but nonculturable state in foodborne pathogens.</a> Frontiers in Microbiology. 8, 580 (2017).</li><li>Wang, X., Gou, X., Chen, S., Yan, X., Sun, D. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Cell+manipulation+tool+with+combined+microwell+array+and+optical+tweezers+for+cell+isolation+and+deposition.">Cell manipulation tool with combined microwell array and optical tweezers for cell isolation and deposition.</a> Journal of Micromechanics and Microengineering. 23 (7), 075006 (2013).</li><li>Lewis, W. H., Tahon, G., Geesink, P., Sousa, D. Z., Ettema, T. J. G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Innovations+to+culturing+the+uncultured+microbial+majority.">Innovations to culturing the uncultured microbial majority.</a> Nature Reviews Microbiology. 19 (4), 225-240 (2020).</li><li>Poonlapdecha, W., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Antibody-conjugated+ferromagnetic+nanoparticles+with+lateral+flow+test+strip+assay+for+rapid+detection+of+Campylobacter+jejuni+in+poultry+samples.">Antibody-conjugated ferromagnetic nanoparticles with lateral flow test strip assay for rapid detection of Campylobacter jejuni in poultry samples.</a> International Journal of Food Microbiology. 286, 6-14 (2018).</li><li>Wang, Z., Cai, R., Gao, Z., Yuan, Y., Yue, T. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Immunomagnetic+separation:+An+effective+pretreatment+technology+for+isolation+and+enrichment+in+food+microorganisms+detection.">Immunomagnetic separation: An effective pretreatment technology for isolation and enrichment in food microorganisms detection.</a> Comprehensive Reviews in Food Science and Food Safety. 19 (6), 3802-3824 (2020).</li><li>Blainey, P. C. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+future+is+now:+Single-cell+genomics+of+bacteria+and+archaea.">The future is now: Single-cell genomics of bacteria and archaea.</a> FEMS Microbiology Reviews. 37 (3), 407-427 (2013).</li><li>Shrirao, A. B., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Microfluidic+flow+cytometry:+The+role+of+microfabrication+methodologies,+performance+and+functional+specification.">Microfluidic flow cytometry: The role of microfabrication methodologies, performance and functional specification.</a> Technology. 06 (01), 1-23 (2018).</li><li>Kou, S., Cheng, D., Sun, F., Hsing, I. -. M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Microfluidics+and+microbial+engineering.">Microfluidics and microbial engineering.</a> Lab on a Chip. 16 (3), 432-446 (2016).</li><li>Kehe, J., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Massively+parallel+screening+of+synthetic+microbial+communities.">Massively parallel screening of synthetic microbial communities.</a> Proceedings of the National Academy of Sciences of the United States of America. 116 (26), 12804-12809 (2019).</li><li>Tibbitt, M. W., Kloxin, A. M., Sawicki, L. A., Anseth, K. S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Mechanical+properties+and+degradation+of+chain+and+step-polymerized+photodegradable+hydrogels.">Mechanical properties and degradation of chain and step-polymerized photodegradable hydrogels.</a> Macromolecules. 46 (7), 2785-2792 (2013).</li><li>Kloxin, A. M., Kasko, A. M., Salinas, C. N., Anseth, K. S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Photodegradable+hydrogels+for+dynamic+tuning+of+physical+and+chemical+properties.">Photodegradable hydrogels for dynamic tuning of physical and chemical properties.</a> Science. 324 (5923), 59-63 (2009).</li><li>Van Der Vlies, A. J., Barua, N., Nieves-Otero, P. A., Platt, T. G., Hansen, R. R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=On+demand+release+and+retrieval+of+bacteria+from+microwell+arrays+using+photodegradable+hydrogel+membranes.">On demand release and retrieval of bacteria from microwell arrays using photodegradable hydrogel membranes.</a> ACS Applied Bio Materials. 2 (1), 266-276 (2019).</li><li>Barua, N., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Simultaneous+discovery+of+positive+and+negative+interactions+among+root+microbiome+bacteria+using+microwell+recovery+arrays.">Simultaneous discovery of positive and negative interactions among root microbiome bacteria using microwell recovery arrays.</a> Frontiers in Microbiology. 11, 3361 (2021).</li><li>Fattahi, N., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Photodegradable+hydrogels+for+rapid+screening,+isolation,+and+genetic+characterization+of+bacteria+with+rare+phenotypes.">Photodegradable hydrogels for rapid screening, isolation, and genetic characterization of bacteria with rare phenotypes.</a> Biomacromolecules. 21 (8), 3140-3151 (2020).</li><li>Masigol, M., Barua, N., Retterer, S. T., Lokitz, B. S., Hansen, R. R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Chemical+copatterning+strategies+using+azlactone-based+block+copolymers.">Chemical copatterning strategies using azlactone-based block copolymers.</a> Journal of Vacuum Science &amp; Technology B, Nanotechnology and Microelectronics: Materials, Processing, Measurement, and Phenomena. 35 (6), (2017).</li><li>Masigol, M., Barua, N., Lokitz, B. S., Hansen, R. R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Fabricating+reactive+surfaces+with+brush-like+and+crosslinked+films+of+azlactone-functionalized+block+co-polymers.">Fabricating reactive surfaces with brush-like and crosslinked films of azlactone-functionalized block co-polymers.</a> Journal of Visualized Experiments: JoVE. (136), e57562 (2018).</li><li>Timm, A. C., Halsted, M. C., Wilmoth, J. L., Retterer, S. T. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Assembly+and+tracking+of+microbial+community+development+within+a+microwell+array+platform.">Assembly and tracking of microbial community development within a microwell array platform.</a> Journal of Visualized Experiments: JoVE. (124), e55701 (2017).</li><li>. DNeasy Blood &amp; Tissue Handbook - QIAGEN Available from: <a target="_blank" href="https://www.qiagen.com/us/resources/resourcedetail?id=68f29296-5a9f-40fa-8b3d-1c148d0b3030&amp;lang=en">https://www.qiagen.com/us/resources/resourcedetail?id=68f29296-5a9f-40fa-8b3d-1c148d0b3030&amp;lang=en</a> (2021)</li><li>Baldwin, A. D., Kiick, K. L. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Tunable+degradation+of+Maleimide-Thiol+adducts+in+reducing+environments.">Tunable degradation of Maleimide-Thiol adducts in reducing environments.</a> Bioconjugate Chemistry. 22 (10), 1946-1953 (2011).</li><li>Shokrzadeh, M., Mohammadpour, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Evaluation+of+a+modified+salt-out+method+for+DNA+extraction+from+whole+blood+lymphocytes:+A+simple+and+economical+method+for+gene+polymorphism.">Evaluation of a modified salt-out method for DNA extraction from whole blood lymphocytes: A simple and economical method for gene polymorphism.</a> Pharmaceutical and Biomedical Research. 4 (2), 28 (2018).</li><li>Hansen, R. H., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Stochastic+assembly+of+bacteria+in+microwell+arrays+reveals+the+importance+of+confinement+in+community+development.">Stochastic assembly of bacteria in microwell arrays reveals the importance of confinement in community development.</a> PLoS One. 11 (5), 0155080 (2016).</li><li>Halsted, M., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Development+of+transparent+microwell+arrays+for+optical+monitoring+and+dissection+of+microbial+communities.">Development of transparent microwell arrays for optical monitoring and dissection of microbial communities.</a> Journal of Vacuum Science &amp; Technology B, Nanotechnology and Microelectronics: Materials, Processing, Measurement, and Phenomena. 34 (6), (2016).</li><li>Zustiak, S. P., Wei, Y., Leach, J. B. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Protein-Hydrogel+Interactions+in+Tissue+Engineering:+Mechanisms+and+Applications.">Protein-Hydrogel Interactions in Tissue Engineering: Mechanisms and Applications.</a> Tissue Engineering. Part B, Reviews. 19 (2), 160 (2013).</li><li>Kandemir, N., Vollmer, W., Jakubovics, N. S., Chen, J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Mechanical+interactions+between+bacteria+and+hydrogels.">Mechanical interactions between bacteria and hydrogels.</a> Scientific Reports. 8 (1), 10893 (2018).</li></ol>

RRH and AJV have filed a patent on this technology. The remaining authors declare no conflict of interest.

This manuscript demonstrates the use of photodegradable hydrogels for bacteria screening and isolation. The material and approach enable high-throughput culture, control over growth media and growth conditions, and clean and precise cell extraction in a straightforward and cost-effective manner. Extraction only requires a fluorescent microscope coupled with the patterned illumination tool and can be done in a sequential manner to isolate multiple cell targets. Each extraction takes 5-10 min to perform, and up to 30 targeted colonies have been removed from a single hydrogel. A key advantage of the approach is its adaptability to a variety of different assay formats, as demonstrated here with screening from both bulk hydrogels and microwell arrays. The separation process in both formats has been successfully used to isolate bacteria that display unique growth behavior for downstream genotyping after culture and microscopic observation, a critical capability for connecting cell genotype to phenotype. To date, genomic characterizations of bacteria extracted from these interfaces have included 16S amplicon sequencing to identify multi-species collections of bacteria from environmental microbiomes that generate emergent growth behavior18, and for whole-genome sequencing to successfully identify genetic mutations that cause rare growth profiles in cells present within mutant libraries19.
Using bulk hydrogels for cell screening and isolation is the most straightforward and simple format. Bulk photodegradable hydrogels form rapidly (25 min) after mixing the precursors over transparent glass coverslips to encapsulate cells in a 3-D cell culture matrix that is imaged with a standard upright or inverted fluorescence microscope. Thus, the method has the potential to be translational to common microbiology laboratories that do not have microfabrication resources or expertise. A drawback to this format is that cells are randomly oriented throughout the three-dimensional hydrogel. Therefore, cells can appear out of the focal plane when imaging with higher magnification objectives and extraction can be difficult if cell colonies are oriented too close to each other or if there is a vertical overlay of colonies. Depositing a thin hydrogel (&#60;13 &#956;m) as described is critical to mitigating this drawback. Exposure in broken cross light patterns (Figure 4B) is preferable here, as this pattern results in cells free of the hydrogel that have minimal exposure to UV light and can be readily recovered through plating.
In contrast, the microwell array format provides a more well-controlled interface, as bacteria cells are partitioned into discrete microwells that serve as small culture or co-cultures sites17,18,26. Microwell dimension, pitch, and density are precisely fabricated using standard photolithographic techniques. Compared to bulk hydrogels, bacteria can be extracted from microwell arrays with a higher degree of specificity and lower chance of cross-contamination, as the cells are only present at predefined locations, not randomly dispersed throughout the hydrogel. The concentration and ratios of bacteria cells in the seeding solution can also be varied to control the quantity and composition of the microwell inoculum through a seeding process that has been characterized in previous reports26, giving the user flexibility in the experimental design of the screen. The primary drawback of screening with the microwell array format is the added time and expertise required for microfabrication. Fabrication of microwells was estimated to cost ~$10 per array, which includes material costs and cleanroom expenses. In addition, microwells arrays are traditionally made from silicon, which can cause imaging difficulties since the substrates are non-transparent. Moreover, a high amount of light scattering from the silicon surface can limit imaging within the microwells and can decrease pattern resolution during hydrogel exposure with UV light from the patterned illumination tool (seen in Figure 8A,B). Similar microwells have been fabricated on transparent quartz substrates to address these types of limitations27; however, this fabrication is considerably more difficult. Exposure to ring patterns that illuminate the perimeter of the well is preferable here to release free cells from the wells while minimizing UV exposure.
The most common problem that occurs in either format is detachment of the hydrogel from the underlying substrate during culture due to hydrogel swelling. If this is an issue for bulk hydrogels, the presence, density, and uniformity of thiol groups in the chemical (MTPS) attachment layer across the surface of the base glass coverslip should be verified using an appropriate surface characterization technique (XPS, ATR-FTIR, AFM, etc.). Low densities of surface thiol groups due to inefficient surface functionalization can lead to a weak interaction between the substrate and the hydrogel. If a low level of surface thiolation occurs, the stability of the MTPS solution should be checked. Care should be taken in the initial cleaning of the glass slide to assure a clean surface prior to MTPS treatment, and care should be taken to ensure the use of anhydrous toluene during the MTPS surface reaction (Protocol Section 4). In the case of microwell arrays, surfaces are not thiolated, and hydrogels instead attach through the partial filling of the wells with the hydrogel, which anchors the hydrogel to the silicon substrate17. If hydrogel detachment is an issue in this system, more microwells or other microscale features can be etched into the array to further anchor the hydrogel to the substrate to promote stronger attachment.
A limitation of the technique in either format is the limited stability of the hydrogels in the presence of bacteria. It has been noted that some bacteria, such as A. tumefaciens, can degrade the hydrogel over the course of 5-7 days17,19, which limits the experiment time. Current investigation of the mechanisms of bacterial degradation is underway; it is hypothesized that the ester groups present from the diacrylate monomers are subject to bacteria-mediated hydrolysis and/or enzymatic degradation, as noted in other systems17. Developing more stable hydrogel chemistries will extend the time that bacteria can remain in the hydrogel and will extend the screen to microorganisms with slower growth rates. A second limitation is that in both formats, cell recovery and extraction occur in an open environment, resulting in relatively high extraction volumes (30-100 &#956;L), which can be susceptible to outside contamination. Thus, care must be given to ensure enough cells are present from the target colonies while minimizing the extraction solution volume. To obtain enough cells for plating and recovery or for extraction of DNA material, it was observed that in bulk hydrogels, cells must be cultured long enough to reach colony diameters of at least 10 &#181;m. To lower the required volume for cell extraction, it was observed that using a microliter syringe and tubing (Figure 2) was more efficient than pipetting. The tubing allowed the isolates to be drawn from the release point more accurately, requiring less solution volume and lowering the chance of contamination.
Future work involves understanding the effect of hydrogel mechanical properties on cell growth, as mechanical features of these hydrogels are well-controlled by the selection of appropriate PEG-based&#160;monomer precursors of various molecular weights28, and mechanical interactions likely play an important role in bacteria behavior29. As the hydrogel materials can be readily incorporated into a variety of different systems and devices, further development is also focused on the integration of this material into microfluidic systems. This would reduce the extraction solution to femtoliter to picoliter volumes, compared to traditional 30-100 &#956;L volumes currently required in the open collection format. Smaller solution volumes would greatly reduce potential contamination and move the approach towards single-cell isolation and characterization.

Isolation of cells with unique behaviors from a complex and heterogeneous environment is fundamental for obtaining genetic information in biology1. In microbiology, the selection and isolation of rare or unique microbes after observation becomes important in many applications that require a connection between genomic information and observable phenotypic information. These applications include selecting phenotypically rare strains from mutant libraries2, selecting keystone microorganisms from complex microbial communities3,4, and selecting phenotypically rare but important bacteria from isogenic populations. Isolation of viable but nonculturable cells (VBNC) from a bacteria population is an important example of the latter, where cells with the VBNC phenotype are often hidden in bacteria populations at 1:102 to 1:105&#160;ratios5,6.&#160;Due to the widespread difficulties in bacteria isolation, much remains unknown about many phenotypically rare microorganisms. These limitations emphasize the need for cell isolation techniques to first identify the target cell or cells from a mixture and then retrieve and isolate them for downstream molecular analysis7.
Some of the most commonly established methods of cell isolation include flow cytometry and fluorescent activated cell sorting (FACS)8, immunomagnetic separation9,10, and microfluidics11. While these isolation methods have high value, they also have drawbacks that limit their use. For example, FACS can provide routine microbial isolation at the single-cell level for follow-up genomic analysis3 but is often limited by its availability and expense, as well as downstream contamination issues11. Microfluidic-based approaches such as microfluidic flow cytometry have obtained much attention, which, compared to conventional flow cytometry, allows for a significant reduction in the sample volume required12. However, separation and retrieval of an individual or small collections of cells from microfluidic devices is often a challenging issue that typically requires a more complex setup and device design13. Many microfluidic-based approaches genetically characterize cells before they are input and observed in a device14, limiting the number of unique species observed when performing a functional screen. Given these limitations, further innovation of both methods and materials that are practical for cell screening and isolation is required for widespread use in many laboratories.
This paper presents a new, materials-based approach for bacteria screening and isolation. The method uses photodegradable hydrogels for cell encapsulation, culture, microscopic observation, and on-demand release and recovery of targeted bacteria with unique phenotypes. Hydrogels are designed to contain 10 nm mesh size, where each crosslink contains o-nitrobenzyl groups15. The material encapsulates or traps cells for observation while enabling the diffusion of nutrients and waste products to and from cells for culture. Exposing the material to a patterned 365 nm UV light source through an upright microscope enables local degradation of the hydrogel through photocleavage of o-nitrobenzyl groups16,17. Degradation triggers the selective release of cells for recovery for downstream analysis, including genomic and, potentially, proteomic and transcriptomic analysis. The experimental setup and protocol are relatively simple, inexpensive, and translational to microbiology laboratories. It requires only cell encapsulation through hydrogel formation, observation of captured cells with an upright brightfield and fluorescence microscope, and the illumination of cells of interest with a patterned UV light source for retrieval.
A key advantage of this materials-based approach to screening is its adaptability to different screening formats. In its most basic format, the material can be used for screening by encapsulating a heterogeneous cell collection in bulk hydrogels. Cells are then observed for the desired phenotype, and individual cells of interest are removed for genomic characterization. In more elaborate formats, the material can also be integrated into lab-on-a-chip devices to provide precise cell release and retrieval from desired areas of the device. Both formats are described here, and both have enabled recent novel microbial screening and selection applications17,18,19. The method is demonstrated here with model Gram-negative organisms (Escherichia coli, Agrobacterium tumefaciens) and a model Gram-positive organism (Bacillus subtilis) and has been readily extended to a variety of other bacteria.

<table border="1" fo:keep-together.within-page="1" fo:keep-with-next.within-page="always">
	<tbody>
		<tr>
			<td>(3-Mercaptopropyl)triethoxysilane</td>
			<td>Sigma-Aldrich</td>
			<td>175617-25G</td>
			<td>&#62; 95%</td>
		</tr>
		<tr>
			<td>Alconox detergent powder</td>
			<td>Alconox</td>
			<td>1104</td>
			<td></td>
		</tr>
		<tr>
			<td>Ammonium sulfate</td>
			<td>Fisher Chemical</td>
			<td>A702-500</td>
			<td>Certified ACS Granular</td>
		</tr>
		<tr>
			<td>Autoclave SK300C</td>
			<td>Yamato Scientific</td>
			<td>18016</td>
			<td></td>
		</tr>
		<tr>
			<td>Bacillus subtilis 1A1135</td>
			<td>Bacillus Genetic Stock Center</td>
			<td>1A1135</td>
			<td></td>
		</tr>
		<tr>
			<td>Brightfield upright microscope</td>
			<td>Olympus Corporation</td>
			<td>BX51</td>
			<td></td>
		</tr>
		<tr>
			<td>Calcium chloride, anhydrous</td>
			<td>Fisher Chemical</td>
			<td>C614-500</td>
			<td>For Desiccators Pellets, 4-20 Mesh</td>
		</tr>
		<tr>
			<td>Centrifuge 5702</td>
			<td>Eppendorf</td>
			<td>5702</td>
			<td></td>
		</tr>
		<tr>
			<td>Citric acid monohydrate</td>
			<td>Sigma-Aldrich</td>
			<td>C1909-500G</td>
			<td>ACS reagent, &#62; 99.0%</td>
		</tr>
		<tr>
			<td>D-Glucose (Dextrose)</td>
			<td>VWR Amresco Life Science</td>
			<td>0188-1KG</td>
			<td></td>
		</tr>
		<tr>
			<td>Dneasy Blood &#38; Tissue Kit</td>
			<td>Qiagen</td>
			<td>69504</td>
			<td>DNA purification kit</td>
		</tr>
		<tr>
			<td>DOWSIL 184 silicone elastomer base</td>
			<td>Dow Silicones Corporation</td>
			<td></td>
			<td>Storage temperature: -30-60 &#176;C</td>
		</tr>
		<tr>
			<td>DOWSIL 184 silicone elastomer curing agent</td>
			<td>Dow Silicones Corporation</td>
			<td></td>
			<td>Storage temperature: &#60; 32 C</td>
		</tr>
		<tr>
			<td>EPOCH2 microplate spectrophotometer</td>
			<td>BioTek Instruments</td>
			<td>EPOCH2</td>
			<td></td>
		</tr>
		<tr>
			<td>Escherichia coli ATCC 25922</td>
			<td>Thermo Fisher Scientific</td>
			<td>R19020</td>
			<td></td>
		</tr>
		<tr>
			<td>Ethanol, anhydrous</td>
			<td>Fisher Chemical</td>
			<td>459844</td>
			<td></td>
		</tr>
		<tr>
			<td>Fisherbrand microscope cover glass</td>
			<td>Fisher Scientific</td>
			<td>12540A</td>
			<td></td>
		</tr>
		<tr>
			<td>Fisherfinest premium microscope slides plain</td>
			<td>Fisher Scientific</td>
			<td>12-544-4</td>
			<td></td>
		</tr>
		<tr>
			<td>Hydrogen peroxide solution</td>
			<td>Sigma-Aldrich</td>
			<td>216763-500ML</td>
			<td>Contains inhibitor, 30 wt% in H2O</td>
		</tr>
		<tr>
			<td>Incu-Shaker Mini</td>
			<td>Benchmark</td>
			<td>E5-0014-01</td>
			<td></td>
		</tr>
		<tr>
			<td>Isopropanol</td>
			<td>Sigma-Aldrich</td>
			<td>190764</td>
			<td></td>
		</tr>
		<tr>
			<td>Magnesium sulfate, 7-hydrate</td>
			<td>Macron Fine Chemicals</td>
			<td>6066-04</td>
			<td>Avantor Performance Materials, Inc.</td>
		</tr>
		<tr>
			<td>Methanol</td>
			<td>Sigma-Aldrich</td>
			<td>179337-4L</td>
			<td>ACS reagent, &#62; 99.8%</td>
		</tr>
		<tr>
			<td>NanoDrop One spectrophotometer</td>
			<td>Thermo Scientific</td>
			<td>ND-ONEC-W</td>
			<td></td>
		</tr>
		<tr>
			<td>Nitrogen, compressed</td>
			<td>Matheson</td>
			<td>UN1066</td>
			<td></td>
		</tr>
		<tr>
			<td>Oxygen plasma cleaner</td>
			<td>Harrick Plasma</td>
			<td>PDC-001-HP</td>
			<td></td>
		</tr>
		<tr>
			<td>Pentaerythritol tetra(mercaptoethyl) polyoxyethylene (4 arm-PEG)</td>
			<td>NOF America Corporation</td>
			<td>PTE-100SH</td>
			<td>Sunbright-PTE-100SH</td>
		</tr>
		<tr>
			<td>Phosphate buffered saline (PBS), 10X</td>
			<td>VWR Amresco Life Science</td>
			<td>K813-500ML</td>
			<td>Store between 15 &#176;C&#8211;30 &#176;C</td>
		</tr>
		<tr>
			<td>Polydimethyl siloxane (PDMS) Slygard 184</td>
			<td>Dow Corning</td>
			<td>4019862</td>
			<td></td>
		</tr>
		<tr>
			<td>Polygon400</td>
			<td>Mightex</td>
			<td>DSI-D-000</td>
			<td></td>
		</tr>
		<tr>
			<td>Premium microscope slides</td>
			<td>Fisher Scientific</td>
			<td>12-544-4</td>
			<td>25 x 75 x 1 mm</td>
		</tr>
		<tr>
			<td>Sodium chloride</td>
			<td>Sigma Life Science</td>
			<td>S5886-500G</td>
			<td>Bioreagent, suitable for cell culture</td>
		</tr>
		<tr>
			<td>Sodium hydroxide</td>
			<td>Sigma-Aldrich</td>
			<td>S8045-500G</td>
			<td>BioXtra, &#62; 98%, pellets (anhydrous)</td>
		</tr>
		<tr>
			<td>Sodium phosphate monobasic dihydrate</td>
			<td>Sigma-Aldrich</td>
			<td>71505-250G</td>
			<td>BioUltra, for molecular biology, &#62; 99.0% (T)</td>
		</tr>
		<tr>
			<td>Stainless steel thickness gage</td>
			<td>Precision Brand Products</td>
			<td>77739</td>
			<td></td>
		</tr>
		<tr>
			<td>Sulfuric acid</td>
			<td>Sigma-Aldrich</td>
			<td>320501-2.5L</td>
			<td></td>
		</tr>
		<tr>
			<td>Toluene, anhydrous, 99.8%</td>
			<td>Sigma-Aldrich</td>
			<td>244511-1L</td>
			<td>Anhydrous, &#62; 99.8%</td>
		</tr>
		<tr>
			<td>Trichloro (1H,1H,2H,2H perfluorooctyl) silane (TPS), 97%</td>
			<td>Sigma-Aldrich</td>
			<td>448931-10G</td>
			<td></td>
		</tr>
		<tr>
			<td>Tryptic soy broth</td>
			<td>Sigma-Aldrich</td>
			<td>22092-500G</td>
			<td>For microbiology</td>
		</tr>
		<tr>
			<td>Ultrasonic sonicator</td>
			<td>Fischer Scientific</td>
			<td>FS-110H</td>
			<td></td>
		</tr>
	</tbody>
</table>

photodegradable hydrogel interfaces for bacteria screening, selection, and isolation

Biologists have long attempted to understand the relationship between phenotype and genotype. To better understand this connection, it is crucial to develop practical technologies that couple microscopic cell screening with cell isolation at high purity for downstream genetic analysis. Here, the use of photodegradable poly(ethylene glycol) hydrogels for screening and isolation of bacteria with unique growth phenotypes from heterogeneous cell populations is described. The method relies on encapsulating or entrapping cells with the hydrogel, followed by culture, microscopic screening, then use of a high-resolution light patterning tool for spatiotemporal control of hydrogel degradation and release of selected cells into a solution for retrieval. Applying different light patterns allows for control over the morphology of the extracted cell, and patterns such as rings or crosses can be used to retrieve cells with minimal direct UV light exposure to mitigate DNA damage to the isolates. Moreover, the light patterning tool delivers an adjustable light dose to achieve various degradation and cell release rates. It allows for degradation at high resolution, enabling cell retrieval with micron-scale spatial precision. Here, the use of this material to screen and retrieve bacteria from both bulk hydrogels and microfabricated lab-on-a-chip devices is demonstrated. The method is inexpensive, simple, and can be used for common and emerging applications in microbiology, including isolation of bacterial strains with rare growth profiles from mutant libraries and isolation of bacterial consortia with emergent phenotypes for genomic characterizations.

To investigate the ability of UV light to trigger controlled hydrogel degradation for cell release, hydrogels were first encapsulated over thiolated coverslips without bacteria present. Each hydrogel was exposed to three replicate circle patterns of light at different intensities and exposure times. The percent gel degradation was calculated after UV light exposure at each light intensity, and the exposure time was then quantified by coupling pendant thiol groups with a fluorescein-5-maelimide dye for fluorescence imaging19,24. A representative example of how these two parameters affect hydrogel degradation is shown in Figure 3. As evident, patterned light provided by the patterned illumination tool provides spatial-temporal control of hydrogel degradation at a resolution that can enable the release of only a small number of cells.
<img alt="Figure 3" class="xfigimg" src="/files/ftp_upload/63048/63048fig03.jpg" /> 
Figure 3: Control over hydrogel degradation. UV light dose and resulting hydrogel degradation rate are tunable via the patterned illumination tool. (Inset)&#160;Two different light intensities were chosen for patterned hydrogel degradation. After 365 nm UV light exposure, hydrogels were labeled with fluorescein-5-maleimide for fluorescence imaging. Reprinted (adapted) with permission from Fattahi et al.19 Copyright 2020 American Chemical Society.&#8203;&#160;<a href="https://www.jove.com/files/ftp_upload/63048/63048fig03large.jpg" target="_blank">Please click here to view a larger version of this figure.</a>
For cell extraction, different light patterns were used to investigate cell release (Figure 4). Here, Agrobacterium bacteria cells were encapsulated into bulk hydrogels over thiolated glass coverslips, then cultured into microscale colonies. Hydrogels were then inspected in brightfield microscopy, and targeted microcolonies were exposed to varied UV light patterns. It was observed that different exposure patterns influenced the morphology of the released cells. This is potentially beneficial for various applications. For instance, exposing a ring pattern around the target colony results in the release of the entire colony still encapsulated in a protective PEG hydrogel and without direct UV light exposure (Figure 4A), which may preserve cells and provide easy downstream purification. In contrast, by exposing part or all of the colony to UV light, cells can be extracted either as aggregated cell clusters (Figure 4B) or as free, individual cells (Figure 4C).
<img alt="Figure 4" class="xfigimg" src="/files/ftp_upload/63048/63048fig04.jpg" /> 
Figure 4: Control over the morphology of the extracted cells. (A) Use of a ring pattern to release the entire cell colony, protected in a PEG matrix. (B)&#160;Use of a broken cross pattern for cell release in aggregates. (C) Use of a cross pattern to release individual cells. Reprinted (adapted) with permission from Fattahi et al.19&#160;&#8203;&#160;<a href="https://www.jove.com/files/ftp_upload/63048/63048fig04large.jpg" target="_blank">Please click here to view a larger version of this figure.</a>
Critical in the encapsulation protocol is both the cell seeding density and the thickness of the hydrogel, as both of these parameters can influence the number of cells incorporated in the hydrogel for observation. To demonstrate, A. tumefaciens cells samples were encapsulated into hydrogels of two different thicknesses using thin spacers (12.7 &#181;m) or thick spacers (40 &#181;m) cultured, and&#160;imaged following the established protocols. Thinner hydrogels resulted in a microcolony density of 90 colonies/mm2 throughout the hydrogel, where minimal colony overlap was observed (Figure 5A). In contrast, hydrogel thicknesses greater than 12.7 &#181;m resulted in the formation of overlapping colonies in the vertical direction (Figure 5B), which may result in the extraction of multiple colonies. Overlapping colonies can cause cross-contamination during extraction due to the two-dimensional nature of the light pattern. For example, a top colony can be targeted, while an underlying colony also is extracted with it (Figure 5C). Therefore, using 12.7 &#181;m spacers is recommended for hydrogel preparation.
<img alt="Figure 5" class="xfigimg" src="/files/ftp_upload/63048/63048fig05.jpg" /> 
Figure 5: Hydrogel thickness affects the extraction purity. (A) By utilizing spacers with a thickness of 12.7 &#181;m for hydrogel formation, colonies are formed within one 10x focal plane. (B) Overlay of colonies can be observed at 10x magnification if spacers with greater thicknesses than 12.7 &#181;m are used. (C) Cross-contamination can occur with an overlay of colonies during cell release: (i) a ring pattern is used to release a targeted cell colony, (ii) the targeted cell colony becomes detached from the hydrogel, and (iii) a second, underlying colony is observed during the light exposure beneath the targeted colony. This colony is also removed, resulting in cross-contamination. Reprinted (adapted) with permission from Fattahi et al.19&#160;Copyright 2020 American Chemical Society.&#8203;&#160;<a href="https://www.jove.com/files/ftp_upload/63048/63048fig05large.jpg" target="_blank">Please click here to view a larger version of this figure.</a>
Given the potential damage to bacteria with UV light, the effect of varied UV light micropatterns on cell viability was further studied using model, Gram-positive bacteria (B. subtilis) and model, Gram-negative bacteria (E. coli). Each was encapsulated within bulk hydrogels and cultured into microscale colonies according to standard protocols, verifying their compatibility with the hydrogel. Targeted microcolonies of equivalent sizes (26 &#177; 1 &#956;m diameter) were then exposed to a constant light dose (168 mJ/mm2), either in the form of circle patterns exposing entire microcolonies to UV light or cross-patterns that degrade only hydrogel edges to minimize light exposure to cells. Cells were then recovered and plated to quantify the CFU/mL recovered from each colony. No significant difference in cell recovery level was found (Figure 6A). To further investigate the purity of the extracted cells, DNA was extracted from E. coli samples and analyzed using a UV-Vis spectrophotometer. For both patterns, DNA quality levels fall within a A260/A280 range between 1.8 and 2.0 (Figure 6B), which is in the ideal range for genomic sequencing25. This demonstrates that the UV patterns used for release under the described conditions have minimal effect on the quantity of viable cells recovered from the bulk hydrogels or on genomic DNA quality after extraction.
<img alt="Figure 6" class="xfigimg" src="/files/ftp_upload/63048/63048fig06.jpg" /> 
Figure 6: Impact of different light exposure patterns on cell viability and DNA quality of bacteria released from bulk hydrogels. (A) Cell recovery levels for both E. coli and B. subtilis after extraction using cross patterns and circle patterns. For this experiment, extraction was done from spherical colonies with the same diameter (26 &#181;m &#177; 1 &#181;m) to ensure the number of released cells from each colony was equivalent. The extracted solutions were then plated to calculate the CFU/mL acquired from each pattern. Statistical analysis showed no significant difference in CFU/mL obtained from cross and circle patterns for both E. coli and B. subtilis (P-value &#62; 0.05, n= 6 for both strains). (B) Spectrophotometric quantification of DNA quality for isolated E. coli cells using cross and circle patterns. Here, statistical analysis did not show a significant difference in DNA quality for the patterns used (P-value &#62; 0.05, n = 6) (C) Brightfield images of colonies with equal diameters exposed to cross and circle patterns. <a href="https://www.jove.com/files/ftp_upload/63048/63048fig06large.jpg" target="_blank">Please click here to view a larger version of this figure.</a>
Microwell arrays provide an alternative, lab-on-a-chip screening interface that offers more controlled screening features compared to bulk hydrogels. For example, microwell arrays enable the seeding of bacteria into discrete culture sites where the number of cells in the inoculum can be controlled. Geometric features of microwells such as well depth and diameter are also controlled through standard microfabrication methods. With these benefits, microwells have been useful for studying bacteria growth under spatial confinement26, and most recently for the discovery of symbiotic and antagonistic interactions between different bacterial species when confined together at the microscale18. Cellular extraction from wells for genomic analysis such as 16S amplicon sequencing is critical for these applications. Using the same hydrogel material, UV light can be exposed over a well containing cells of interest, either as circle or ring patterns. The latter ensures hydrogel degradation only at the microwell perimeter to prevent direct irradiation of cells. To demonstrate this, A. tumefaciens cells expressing mCherry were seeded into wells, the hydrogel was then attached to the microwell array. Cells were cultured and then irradiated with either circle or ring patterns. The membrane was then stained with fluorescein-5-maleimide dye. Two-color fluorescence images revealed that both the membrane and the cells within the wells are removed for both irradiation patterns17. Unlike the bulk hydrogel format, cell extraction here has only been observed in the shape of cell clusters18.
<img alt="Figure 7" class="xfigimg" src="/files/ftp_upload/63048/63048fig07.jpg" /> 
Figure 7: Representative confocal microscopy images showing light pattern impact on cell isolation from microwell arrays. (A) Microwells with diameters of 40 &#181;m containing bacteria (red) after seeding and culture. (B) Light exposure using circle and ring patterns (blue). (C) Decreased red fluorescence demonstrates that cells are extracted from irradiated wells. (D) Two-color fluorescence image of membranes and bacteria after irradiation, indicating removal of both the hydrogel (green) and bacteria (red) from target wells. (E) Z-stack, two-color fluorescence image of target wells. The red line in (D) denotes the xz plane imaged in (E), and the green line in (E) denotes the xy plane imaged in (D). Samples in images (C-E) were washed for removal of released cells, then fixed and imaged. Scale bar = 40 &#181;m. Reprinted (adapted) with permission from van der Vlies et al.17. Copyright 2019 American Chemical Soceity.&#160;<a href="https://www.jove.com/files/ftp_upload/63048/63048fig07large.jpg" target="_blank">Please click here to view a larger version of this figure.</a>
To quantify bacteria cell viability and DNA quality after extraction in this format, B. subtilis and E. coli cells were seeded, cultured, and then released from microwell arrays using circle and ring patterns (Figure 8A, B). Released cells were then plated on ATGN agar plates, and the DNA quality of the extracted cells was quantified. To ensure that a consistent number of cells was present during each extraction, microwells with similar fluorescent intensities (~6000 A.U.) and therefore a similar number of cells were targeted for release. The number of viable cells extracted using a circle pattern was not significantly different from the number of viable cells extracted using ring pattern for either bacteria&#160;(Figure 8C). Also, the DNA quality levels were not significantly different between the circle and ring patterns for either bacteria (Figure 8D). Hence, similar to findings in bulk hydrogels, the application of UV light at the intensity and duration specified here had a negligible impact on the viability and DNA quality of cells extracted from the microwell arrays. These findings demonstrate that viable bacteria cells can be selectively retrieved from microwells with minimal damage for downstream analysis.
<img alt="Figure 8" class="xfigimg" src="/files/ftp_upload/63048/63048fig08.jpg" /> 
Figure 8: Impact of different light exposure patterns on cell viability and DNA quality of bacteria released from microwell arrays. (A,B) For both E. coli and B. subtilis, circle patterns and ring patterns were used for cell extraction from 10 &#181;m microwells. Circle pattern with a diameter of 10 &#181;m and ring pattern with an inner diameter of 10 &#181;m and outer diameter of 20 &#181;m were used in this experiment for cell extraction. Microwells with the same diameters were used to ensure that the number of released cells from each microwell was the same. (C) The extracted solutions were then plated to calculate the CFU/mL acquired from each exposure pattern. Statistical analysis showed no significant difference in CFU/mL obtained from circle and ring pattern for both E. coli and B. subtilis (P-value &#62; 0.05, n = 6 for both strains). (D) Spectrophotometry was used to measure the DNA quality of both E. coli and B. subtilis cells using circle and ring patterns. Here, statistical analysis did not show any significant difference in the DNA quality for the patterns used (P-value &#62; 0.05, n = 6 for both strains). <a href="https://www.jove.com/files/ftp_upload/63048/63048fig08large.jpg" target="_blank">Please click here to view a larger version of this figure.</a>
Supplementary Figure 1: Design and fabrication of microwell arrays. (A) Standard microfabrication techniques were applied to fabricate microwell arrays on silicon wafers. (B) Each substrate consisted of 7 x 7 arrays of 10&#181;m diameter wells with 20 &#181;m depth and 30 &#181;m pitch. (C) Each array consisted of 225 microwells. This figure has been modified from Barua et al.18. Copyright 2021 Frontiers Media.&#160;<a href="https://www.jove.com/files/ftp_upload/63048/Supplementary Figure 1.pdf" target="_blank">Please click here to download this File.</a>

Watch this Scientific Journal Video about Photodegradable Hydrogel Interfaces for Bacteria Screening, Selection, and Isolation at JoVE.com

Photodegradable Hydrogel Interfaces for Bacteria Screening, Selection, and Isolation

The use of photodegradable hydrogels to isolate bacterial cells by utilizing a high-resolution light pattering tool is reported. Essential experimental procedures, results, and advantages of the process are reviewed. The method enables rapid and inexpensive isolation of targeted bacteria showing rare or unique functions from heterogeneous communities or populations.

Biologists have long attempted to understand the relationship between phenotype and genotype. To better understand this connection, it is crucial to ...

photodegradable-hydrogel-interfaces-for-bacteria-screening-selection

Research

JoVE Journal

Bioengineering

2.6K Views.  Kansas State University. The use of photodegradable hydrogels to isolate bacterial cells by utilizing a high-resolution light pattering tool is reported. Essential experimental procedures, results, and advantages of the process are reviewed. The method enables rapid and inexpensive isolation of targeted bacteria showing rare or unique functions from heterogeneous communities or populations. 

Video: Photodegradable Hydrogel Interfaces for Bacteria Screening, Selection, and Isolation

Biosensor for Detection of Antibiotic Resistant Staphylococcus Bacteria

A structurally transformed lytic bacteriophage having a broad host range of Staphylococcus aureus strains and a penicillin-binding protein (PBP 2a) antibody conjugated latex beads have been utilized to create a biosensor designed for discrimination of methicillin resistant (MRSA) and sensitive (MSSA) S. aureus species 1,2. The lytic phages have been converted into phage spheroids by contact with water-chloroform interface. Phage spheroid monolayers have been moved onto a biosensor surface by Langmuir-Blodgett (LB) technique 3. The created biosensors have been examined by a quartz crystal microbalance with dissipation tracking (QCM-D) to evaluate bacteria-phage interactions. Bacteria-spheroid interactions led to reduced resonance frequency and a rise in dissipation energy for both MRSA and MSSA strains. After the bacterial binding, these sensors have been further exposed to the penicillin-binding protein antibody latex beads. Sensors analyzed with MRSA responded to PBP 2a antibody beads; although sensors inspected with MSSA gave no response. This experimental distinction determines an unambiguous discrimination between methicillin resistant and sensitive S. aureus strains. Equally bound and unbound bacteriophages suppress bacterial growth on surfaces and in water suspensions. Once lytic phages are changed into spheroids, they retain their strong lytic activity and show high bacterial capture capability. The phage and phage spheroids can be utilized for testing and sterilization of antibiotic resistant microorganisms. Other applications may include use in bacteriophage therapy and antimicrobial surfaces.

Lytic phage biosensors and antibody beads are able to discriminate between methicillin resistant (MRSA) and sensitive staphylococcus bacteria. The phages were immobilized by a Langmuir-Blodgett method onto a surface of a quartz crystal microbalance sensor and worked as broad range staphylococcus probes. Antibody beads recognize MRSA.

A structurally transformed lytic bacteriophage having a broad host range of Staphylococcus aureus strains and a penicillin-binding protein (PBP 2a) ...

Preparation of Hydroxy-PAAm Hydrogels for Decoupling the Effects of Mechanotransduction Cues

It is now well established that many cellular functions are regulated by interactions of cells with physicochemical and mechanical cues of their extracellular matrix (ECM) environment. Eukaryotic cells constantly sense their local microenvironment through surface mechanosensors to transduce physical changes of ECM into biochemical signals, and integrate these signals to achieve specific changes in gene expression. Interestingly, physicochemical and mechanical parameters of the ECM can couple with each other to regulate cell fate. Therefore, a key to understanding mechanotransduction is to decouple the relative contribution of ECM cues on cellular functions.
Here we present a detailed experimental protocol to rapidly and easily generate biologically relevant hydrogels for the independent tuning of mechanotransduction cues in vitro. We chemically modified polyacrylamide hydrogels (PAAm) to surmount their intrinsically non-adhesive properties by incorporating hydroxyl-functionalized acrylamide monomers during the polymerization. We obtained a novel PAAm hydrogel, called hydroxy-PAAm, which permits immobilization of any desired nature of ECM proteins. The combination of hydroxy-PAAm hydrogels with microcontact printing allows to independently control the morphology of single-cells, the matrix stiffness, the nature and the density of ECM proteins. We provide a simple and rapid method that can be set up in every biology lab to study in vitro cell mechanotransduction processes. We validate this novel two-dimensional platform by conducting experiments on endothelial cells that demonstrate a mechanical coupling between ECM stiffness and the nucleus.

We present a new polyacrylamide hydrogel, called hydroxy-PAAm, that allows a direct binding of ECM proteins with minimal cost or expertise. The combination of hydroxy-PAAm hydrogels with microcontact printing facilitates independent control of many cues of the natural cell microenvironment for studying cellular mechanostransduction.

It is now well established that many cellular functions are regulated by interactions of cells with physicochemical and mechanical cues of their ...

3D Hydrogel Scaffolds for Articular Chondrocyte Culture and Cartilage Generation

Human articular cartilage is highly susceptible to damage and has limited self-repair and regeneration potential. Cell-based strategies to engineer cartilage tissue offer a promising solution to repair articular cartilage. To select the optimal cell source for tissue repair, it is important to develop an appropriate culture platform to systematically examine the biological and biomechanical differences in the tissue-engineered cartilage by different cell sources. Here we applied a three-dimensional (3D) biomimetic hydrogel culture platform to systematically examine cartilage regeneration potential of juvenile, adult, and osteoarthritic (OA) chondrocytes. The 3D biomimetic hydrogel consisted of synthetic component poly(ethylene glycol) and bioactive component chondroitin sulfate, which provides a physiologically relevant microenvironment for in vitro culture of chondrocytes. In addition, the scaffold may be potentially used for cell delivery for cartilage repair in vivo. Cartilage tissue engineered in the scaffold can be evaluated using quantitative gene expression, immunofluorescence staining, biochemical assays, and mechanical testing. Utilizing these outcomes, we were able to characterize the differential regenerative potential of chondrocytes of varying age, both at the gene expression level and in the biochemical and biomechanical properties of the engineered cartilage tissue. The 3D culture model could be applied to investigate the molecular and functional differences among chondrocytes and progenitor cells from different stages of normal or aberrant development.

Cartilage repair represents an unmet medical challenge and cell-based approaches to engineer human articular cartilage are a promising solution. Here, we describe three-dimensional (3D) biomimetic hydrogels as an ideal tool for the expansion and maturation of human articular chondrocytes.

Human articular cartilage is highly susceptible to damage and has limited self-repair and regeneration potential. Cell-based strategies to engineer ...

Construction of Modular Hydrogel Sheets for Micropatterned Macro-scaled 3D Cellular Architecture

Hydrogels can be patterned at the micro-scale using microfluidic or micropatterning technologies to provide an in vivo-like three-dimensional (3D) tissue geometry. The resulting 3D hydrogel-based cellular constructs have been introduced as an alternative to animal experiments for advanced biological studies, pharmacological assays and organ transplant applications. Although hydrogel-based particles and fibers can be easily fabricated, it is difficult to manipulate them for tissue reconstruction. In this video, we describe a fabrication method for micropatterned alginate hydrogel sheets, together with their assembly to form a macro-scale 3D cell culture system with a controlled cellular microenvironment. Using a mist form of the calcium gelling agent, thin hydrogel sheets are easily generated with a thickness in the range of 100 - 200 &#181;m, and with precise micropatterns. Cells can then be cultured with the geometric guidance of the hydrogel sheets in freestanding conditions. Furthermore, the hydrogel sheets can be readily manipulated using a micropipette with an end-cut tip, and can be assembled into multi-layered structures by stacking them using a patterned polydimethylsiloxane (PDMS) frame. These modular hydrogel sheets, which can be fabricated using a facile process, have potential applications of in vitro drug assays and biological studies, including functional studies of micro- and macrostructure and tissue reconstruction.

We describe the fabrication of micropatterned hydrogel sheets using a simple process, which can be assembled and manipulated in a freestanding form. Using these modular hydrogel sheets, a simple macro-scaled 3D cell culture system can be generated with a controlled cellular microenvironment.

Hydrogels can be patterned at the micro-scale using microfluidic or micropatterning technologies to provide an in vivo-like three-dimensional (3D) tissue ...

Gradient Strain Chip for Stimulating Cellular Behaviors in Cell-laden Hydrogel

Artificial guidance for cellular alignment is a hot topic in the field of tissue engineering. Most of the previous research has investigated single strain-induced cellular alignment on a cell-laden hydrogel by using complex experimental processes and mass controlling systems, which are usually associated with contamination issues. Thus, in this article, we propose a simple approach to building a gradient static strain using a fluidic chip with a plastic PDMS cover and a UV transparent glass substrate for the stimulation of cellular behavior in a 3D hydrogel. Overloading photo-patternable cell prepolymer in the fluidic chamber can generate a convex curved PDMS membrane on the cover. After UV crosslinking, through a concentric circular micropattern under the curved PDMS membrane, and buffer washing, a microenvironment for investigating cell behaviors under a variety of gradient strains is self-established in a single fluidic chip, without external instruments. NIH3T3 cells were demonstrated after observing the change in the cellular alignment trend under geometry guidance, in cooperation with strain stimulation, which varied from 15 - 65% on hydrogels. After a 3-day incubation, the hydrogel geometry dominated the cell alignment under low compressive strain, where cells aligned along the hydrogel elongation direction under high compressive strain. Between these, the cells showed random alignment due to the dissipation of the radical guidance of hydrogel elongation and the geometry guidance of the patterned hydrogel.

This article introduces a simple approach to providing non-continuous gradient static strains on a concentric cell-laden hydrogel to regulate cell alignment for tissue engineering.

Artificial guidance for cellular alignment is a hot topic in the field of tissue engineering. Most of the previous research has investigated single ...

Fabricating a Kidney Cortex Extracellular Matrix-Derived Hydrogel

Extracellular matrix (ECM) provides important biophysical and biochemical cues to maintain tissue homeostasis. Current synthetic hydrogels offer robust mechanical support for in vitro cell culture but lack the necessary protein and ligand composition to elicit physiological behavior from cells. This manuscript describes a fabrication method for a kidney cortex ECM-derived hydrogel with proper mechanical robustness and supportive biochemical composition. The hydrogel is fabricated by mechanically homogenizing and solubilizing decellularized human kidney cortex ECM. The matrix preserves native kidney cortex ECM protein ratios while also enabling gelation to physiological mechanical stiffnesses. The hydrogel serves as a substrate upon which kidney cortex-derived cells can be maintained under physiological conditions. Furthermore, the hydrogel composition can be manipulated to model a diseased environment which enables the future study of kidney diseases.

Here we present a protocol to fabricate a kidney cortex extracellular matrix-derived hydrogel to retain the native kidney extracellular matrix (ECM) structural and biochemical composition. The fabrication process and its applications are described. Finally, a perspective on using this hydrogel to support kidney-specific cellular and tissue regeneration and bioengineering is discussed.

Extracellular matrix (ECM) provides important biophysical and biochemical cues to maintain tissue homeostasis. Current synthetic hydrogels offer robust ...

Applications for Open Source Microplate-Compatible Illumination Panels

Microplates are commonly used in the modern laboratory environment for a wide variety of tasks both in small-scale laboratory benchtop operations as well as large-scale high-throughput screening (HTS) campaigns. Though laboratory automation has greatly increased the utility of microplates there remain instances where automation-based instrumentation is not feasible, cost-effective or compatible with microplate formatting needs. In these cases, microplates must be manually prepared. Problematic to manual microplate manipulations is that a number of difficulties can arise pertaining to the accurate tracking of sample operations, data record keeping and quality control (QC) inspection for well artifacts or formatting errors. As microplate well densities increase (i.e., 96-well, 384-well, 1536-well) the potential for introducing errors also drastically increases.&#160; Moreover, for small bench-top laboratory operations there exists a need to improve the ease and accuracy of sample handling in a cost-effective fashion. Herein, we describe a system that acts as a semi-automated pipetting guide referred to as the Microplate Assistive Pipetting Light Emitter (M.A.P.L.E.). &#160;M.A.P.L.E. has multiple uses for supporting compound hit-picking and microplate preparation for assay development in high-throughput screening or laboratory benchtop operations, as well as QC/quality assurance (QA) diagnostic evaluation of microplate quality or visualizing well formatting errors.

Microplate Assistive Pipetting Light Emitter (M.A.P.L.E.) is a computer-driven device that systematically illuminates microtiter wells to provide guidance for the manual preparation of microplates.&#160; M.A.P.L.E. improves the accuracy of microplate preparation while automating data recordkeeping. &#160;In addition, it can assist with examining microplate quality or aid in the detection of errors.&#160; &#160;

Microplates are commonly used in the modern laboratory environment for a wide variety of tasks both in small-scale laboratory benchtop operations as well ...

Hydrogel Arrays Enable Increased Throughput for Screening Effects of Matrix Components and Therapeutics in 3D Tumor Models

Cell-matrix interactions mediate complex physiological processes through biochemical, mechanical, and geometrical cues, influencing pathological changes and therapeutic responses. Accounting for matrix effects earlier in the drug development pipeline is expected to increase the likelihood of clinical success of novel therapeutics. Biomaterial-based strategies recapitulating specific tissue microenvironments in 3D cell culture exist but integrating these with the 2D culture methods primarily used for drug screening has been challenging. Thus, the protocol presented here details the development of methods for 3D culture within miniaturized biomaterial matrices in a multi-well plate format to facilitate integration with existing drug screening pipelines and conventional assays for cell viability. Since the matrix features critical for preserving clinically relevant phenotypes in cultured cells are expected to be highly tissue- and disease-specific, combinatorial screening of matrix parameters will be necessary to identify appropriate conditions for specific applications. The methods described here use a miniaturized culture format to assess cancer cell responses to orthogonal variation of matrix mechanics and ligand presentation. Specifically, this study demonstrates the use of this platform to investigate the effects of matrix parameters on the responses of patient-derived glioblastoma (GBM) cells to chemotherapy.

The present protocol describes an experimental platform to assess the effects of mechanical and biochemical cues on chemotherapeutic responses of patient-derived glioblastoma cells in 3D matrix-mimetic cultures using a custom-made UV illumination device facilitating high-throughput photocrosslinking of hydrogels with tunable mechanical features.

Cell-matrix interactions mediate complex physiological processes through biochemical, mechanical, and geometrical cues, influencing pathological changes ...

Isolation of Next-Generation Gene Therapy Vectors through Engineering, Barcoding, and Screening of Adeno-Associated Virus (AAV) Capsid Variants

Gene delivery vectors derived from Adeno-associated virus (AAV) are one of the most promising tools for the treatment of genetic diseases, evidenced by encouraging clinical data and the approval of several AAV gene therapies. Two major reasons for the success of AAV vectors are (i) the prior isolation of various naturally occurring viral serotypes with distinct properties, and (ii) the subsequent establishment of powerful technologies for their molecular engineering and repurposing in high throughput. Further boosting the potential of these techniques are recently implemented strategies for barcoding selected AAV capsids on the DNA and RNA level, permitting their comprehensive and parallel in vivo stratification in all major organs and cell types in a single animal. Here, we present a basic pipeline encompassing this set of complementary avenues, using AAV peptide display to represent the diverse arsenal of available capsid engineering technologies. Accordingly, we first describe the pivotal steps for the generation of an AAV peptide display library for the in vivo selection of candidates with desired properties, followed by a demonstration of how to barcode the most interesting capsid variants for secondary in vivo screening. Next, we exemplify the methodology for the creation of libraries for next-generation sequencing (NGS), including barcode amplification and adaptor ligation, before concluding with an overview of the most critical steps during NGS data analysis. As the protocols reported here are versatile and adaptable, researchers can easily harness them to enrich the optimal AAV capsid variants in their favorite disease model and for gene therapy applications.

Isolation of Next-Generation Gene Therapy Vectors through Engineering, Barcoding, and Screening of Adeno-Associated Virus AAV Capsid Variants

AAV peptide display library generation and subsequent validation through the barcoding of candidates with novel properties for the creation of next-generation AAVs.

Gene delivery vectors derived from Adeno-associated virus (AAV) are one of the most promising tools for the treatment of genetic diseases, evidenced by ...

Synthesis of Strong Adhesive Hydrogel, Gelatin O-Nitrosobenzaldehyde

Adhesive materials have become popular biomaterials in the field of biomedical and tissue engineering. In our previous work, we presented a new material - gelatin o-nitrosobenzaldehyde (gelatin-NB) - which is mainly used for tissue regeneration and has been validated in animal models of corneal injury and inflammatory bowel disease. This is a novel hydrogel formed by modifying biological gelatin with o-nitrosobenzaldehyde (NB). Gelatin-NB was synthesized by activating the carboxyl group of NB-COOH and reacting with gelatin through 1-(3-dimethylaminopropyl)-3-ethylcarbodiimide hydrochloride (EDC) and N-hydroxysuccinimide (NHS). The obtained compound was purified to generate the final product, which can be stably stored for at least 18 months. NB has a strong adhesion to -NH2 on the tissue, which can form many C = N bonds, thus increasing the adhesion of gelatin-NB to the tissue interface. The preparation process comprises steps for the synthesis of the NB-COOH group, modification of the group, synthesis of gelatin-NB, and purification of the compound. The goal is to describe the specific synthesis process of gelatin-NB in detail and to demonstrate the application of gelatin-NB to damage repair. Moreover, the protocol is presented to further strengthen and expand the nature of the material produced by the scientific community for more applicable scenarios.

The protocol presented here shows the synthesis of a strong adhesive hydrogel gelatin o-nitrosobenzaldehyde (gelatin-NB). Gelatin-NB has rapid and efficient tissue adhesion ability, which can form a strong physical barrier to protect wound surfaces, so it is expected to be applied to the field of injury repair biotechnology.

Adhesive materials have become popular biomaterials in the field of biomedical and tissue engineering. In our previous work, we presented a new material - ...