Agrobacterium-Mediated Genetic Transformation, Transgenic Production, and Its Application for the Study of Male Reproductive Development in Rice

Podsumowanie

This work describes the use of CRISPR-Cas9 genome editing technology to knockout endogenous gene OsABCG15 followed by a modified Agrobacterium-mediated transformation protocol to produce a stable male-sterile line in rice.

Streszczenie

Male sterility is an important agronomic trait for hybrid seed production that is usually characterized by functional defects in male reproductive organs/gametes. Recent advances in CRISPR-Cas9 genome editing technology allow for high editing efficacy and timesaving knockout mutations of endogenous candidate genes at specific sites. Additionally, Agrobacterium-mediated genetic transformation of rice is also a key method for gene modification, which has been widely adopted by many public and private laboratories. In this study, we applied CRISPR-Cas9 genome editing tools and successfully generated three male sterile mutant lines by targeted genome editing of OsABCG15 in a japonica cultivar. We used a modified Agrobacterium-mediated rice transformation method that could provide excellent means of genetic emasculation for hybrid seed production in rice. Transgenic plants can be obtained within 2–3 months and homozygous transformants were screened by genotyping using PCR amplification and Sanger sequencing. Basic phenotypic characterization of the male sterile homozygous line was performed by microscopic observation of the rice male reproductive organs, pollen viability analysis by iodine potassium iodide (I₂-KI) staining semi-thin cross-sectioning of developing anthers.

Wprowadzenie

Rice is the most important food crop, particularly in developing countries, and represents a staple food for over half of the world’s population. Overall, the demand for rice grain is growing and is projected to increase 50% by 2030 and 100% by 2050^1,2. Future improvements in rice yield will need to capitalize on diverse molecular and genetic resources that make rice an excellent model for monocotyledonous plant research. These include an efficient transformation system, advanced molecular map, and publicly accessible database of expressed sequence tags, which have been generated over many years^3,4. One strategy to improve crop yield is hybrid seed production⁵, a central element of which is the ability to manipulate male fertility. Understanding the molecular control of male fertility in cereal crops can help to translate key knowledge into practical techniques to improve hybrid seed production and enhance crop productivity^6,7.

Genetic transformation is a key tool for basic research and commercial agriculture since it enables introduction of foreign genes or manipulation of endogenous genes in crop plants, and results in the generation of genetically modified lines. An appropriate transformation protocol can help to accelerate genetic and molecular biology studies for fundamental understanding of gene regulation⁸. In bacteria, genetic transformation takes place naturally; however, in plants, it is performed artificially using molecular biology techniques^9,10. Agrobacterium tumefaciens is a soil-borne, Gram-negative bacterium that causes crown gall disease in plants by transferring T-DNA, a region of its Ti plasmid, into the plant cell via a type IV secretion system^11,12. In plants, A. tumefaciens-mediated transformation is considered a widespread method for gene modification because it leads to stable and low copy number integration of T-DNA into the host genome¹³. Transgenic rice was first generated through Agrobacterium-mediated gene transformation in the mid-1990s in the japonica cultivar¹⁴. Using this protocol, several transgenic lines were obtained within a period of 4 months with a transformation efficiency of 10%–30%. The study indicated that there are two critical steps for the successful transformation: one is the induction of embryogenic callus from mature seeds and another is the addition of acetosyringone, a phenolic compound, to the bacterial culture during co-cultivation, which allows for higher transformation efficiency in plants^14,15. This protocol has been extensively used with minor alterations in japonica^16,17,18,19 as well as other cultivars such as indica^20,21,22,23 and tropical japonica^24,25. Indeed, over 80% of the articles describing rice transformation use Agrobacterium-mediated gene transformation as a tool¹³. To date, several genetic transformation protocols have been developed using rice seed as a starting material for callus induction^16,17,18,19. However, very little is known about young inflorescence as explants for callus production. Overall, it is important to establish a rapid, reproducible, and efficient gene transformation and regeneration protocol for functional genomics and studies on crop improvement.

In recent years, the advancement of CRISPR-Cas9 technology has resulted in a precise genome editing mechanism to understand gene function and deliver agronomically important improvements for plant breeding^26,27. CRISPR also offers considerable promise for the manipulation of male reproductive development and hybrid production. In this study, we utilized a gene knockout system using CRISPR-Cas9 technology and coupled it to an efficient rice gene transformation protocol using young inflorescences as explants, thereby creating stable male sterile lines for the study of reproductive development.

Protokół

1. sgRNA-CAS9 plant expression vector construction and Agrobacterium-mediated transformation

1. Target a male sterile gene OsABCG15 in rice according to the published literature²⁸.
2. Design sgRNA for the targeted site located between 106–125 bp in the second exon of OsABCG15 (Figure 1).
3. Use T4 polynucleotide kinase to synthesize the sgRNA oligos (sgR-OsABCG15-F: 5’TGGCAAGCACATCCTCAAGGGGAT3’ and 5’sgR-OsABCG15-R: AAACATCCCCTTGAGGATGTGCTT’).
4. Use endonuclease BbsI to digest the psgR-Cas9 backbone vector²⁹.
5. Ligate the synthesized sgRNA oligos with linearized psgR-Cas9 backbone using T4 ligase following the manufacturer’s protocol.
6. Using HindIII/EcoRI, digest the sgRNA cassette from step 1.5 and subclone into the HindIII/EcoRI site of the pCAMBIA1300 binary vector for stable transformation²⁹.
7. Confirm the constructed plasmid by enzyme digestion and sequencing. Later, transform the binary construct into the Agrobacterium tumefaciens strain EHA105 and grow them on Kan/Rif selection plates at 28 °C for 2–3 days.

2. Rice genetic transformation and plant tissue culture

1. Callus induction and regeneration
   NOTE: Use fresh young rice inflorescences as the starting material to induce callus (Figure 2).
   1. Collect the young inflorescences from the paddy field or green house at meiosis stage, determined by floret length of 1.6-4.8 mm (Figure 2A)²⁹. Ensure that the rice inflorescences are covered with leaf sheath. Wipe each inflorescence with a 70% alcohol swab and let it dry before cutting.
   2. Bring the inflorescence to a clean sterile bench. Cut it into small pieces (the smaller the better) with sterilized scissors and then transfer cuttings to a Petri plate containing NBD2 medium (Figure 2B, Table 1).
   3. Incubate the plate in the dark at 26 °C for about 10-14 days to induce callus (Figure 3A).
      NOTE: Use the newly formed callus for Agrobacterium infiltration (step 2.2.7) directly or recondition one more time in fresh NBD2 medium to obtain more callus. Transfer the callus into the new NBD2 medium every 8–10 days.
2. Transformation and co-cultivation
   1. Use A. tumefaciens bacteria containing the binary plasmid from step 1.6 for transformation. Store the A. tumefaciens strains in YEB medium (Table 1) with 50% glycerol at -80 °C for further use.
   2. Streak A. tumefaciens from a -80 °C glycerol stock to YEB agar medium containing selective antibiotics (Table 1) and grow at 25–28 ˚C for 48–72 h, to allow colonies to appear.
   3. Inoculate a single colony from the YEB plate with selective antibiotics to 5 mL of liquid YEB medium containing the same selective antibiotics (Table 1), in a 50 mL conical sterile test tube. Shake on an orbital shaker at 250 x g, at 25–28 °C until bacteria grow to an OD₆₀₀ of 0.5.
   4. Add 1 mL of bacterial suspension to 100 mL of YEB medium (Table 1) with the same selective antibiotics in a 250 mL conical flask and shake on an orbital shaker at 250 x g, at 28 °C for 4 h.
   5. Centrifuge at 4,000 x g for 10 min at room temperature to collect bacteria. Discard the supernatant.
   6. Resuspend the bacterial pellet with AAM-AS medium (Table 1) and dilute the suspension to an OD₆₀₀ = 0.4.
      NOTE: The perfect OD of bacterial suspension is critical for efficient transformation. It helps in eliminating excess bacterial growth on the callus.
   7. Collect around 150 healthy growing light-yellow fragile embryogenic calli from step 2.1.3 into a 150 mL sterile flask. Add 50–75 mL bacterial cell suspension from step 2.2.6 into the sterile flask, and then add some 10–25 mL fresh AAM-AS medium to immerse the calli for 10–20 min, shaking occasionally.
   8. Pour out the bacterial suspension from the flask carefully and dry the excess bacterial suspension from the callus using sterile filter paper #1 or tissue paper. Then place them on a Petri dish with NBD-AS medium (Table 1) covered with a sterile filter paper #1. Incubate at 25–28 °C in the dark for 3 days and check for bacterial overgrowth.
3. Selection for resistant callus
   1. After 3 days of co-cultivation, transfer the calli to a sterile Petri dish with a sterile filter paper.
   2. Air-dry the calli for 2 h on a clean bench. Ensure that the callus is not adhered to the filter paper.
   3. Transfer the calli evenly using sterile tweezer to the primary selection medium NBD2 (with 40 mg/L hygromycin and 250 mg/L timentin) (Table 1). Culture calli for 2 weeks at 25–28 °C in the dark.
   4. After 2 weeks, transfer calli evenly to a new plate containing fresh selection medium NBD2 (with 40 mg/L hygromycin and 250 mg/L timentin) (Table 1). Culture the calli for another 2 weeks at 25–28 °C in the dark.
4. Callus differentiation
   1. Transfer callus to fresh MS Medium (with 25 mg/L hygromycin and 150 mg/L timentin) (Table 1). Culture under the light at 25–28 °C for around 2 weeks.
   2. Repeat step 2.4.1 one more time.
   3. Transfer the shoot buds to the new MS medium (with 10 mg/L hygromycin) to proliferate more shoots.
5. Root induction
   1. Transfer the new shoots into ½ MS medium (Table 1). Culture under the light at 25 °C - 28 °C. The transformed plants produce roots within 2 weeks.
   2. After 1 week, transfer the plants to clean pots covering the plant to prevent dehydration.

3. Genotype identification

1. Collect young leaves from newly generated plants for total DNA extraction using the cetyltrimethyl ammonium bromide (CTAB) method³¹.
2. Using the genomic DNA as template, choose the primers (Hygromycin-F: 5’ GATGTTGGCGACCTCGTATT 3’ and Hygromycin-R: 5’ CGAAGAATCTCGTGCTTTCA 3’ located in the Hygromycin region) to perform polymerase chain reaction (PCR) to validate the transgene integration and frequencies (Figure 4). The following PCR conditions: 94 °C for 5 min; 36 cycles (94 °C for 30 s; 56 °C for 30 s; 72 °C for 1 min ); 72 °C for 7 min. Successful PCR reactions yield a 604 bp amplicon.
3. Perform another PCR to amplify the genomic region surrounding the CRISPR target sites using specific primers (OsABCG15-ID-F: 5’ GTCTCATTGCTCAACAGTTTCT 3’ and OsABCG15-ID-R: 5’ TTGGTGTTTAAAACATTGCTAT 3’) to identify the genotype of the transformants. The PCR conditions are the same as in step 3.2.
4. Use PCR fragments from step 3.3 directly for Sanger sequencing to identify mutations.

4. Observe the basic phenotype of the mutant

1. Prepare the I₂-KI solution: dissolve 2 g of KI (potassium iodide) in 10 mL of distilled water and then add 0.2 g of I₂ (resublimed iodine) in it. After mixing, bring the total volume to 100 mL with distilled water.
2. Prepare the FAA solution (63% anhydrous ethanol, 5% glacial acetic acid, 5% formaldehyde and 27% water) and mix before using.
3. Prepare the 0.5% Toluidine blue staining solution: dissolve 0.5 g of Toluidine blue in 100 mL of distilled water.
4. Perform vegetative phenotypic observation, by imaging the whole plants with a digital camera.
5. Perform reproductive phenotype observation, remove the palea and lemma from the floret. Take photos of whole anthers under a stereomicroscope.
6. Observe the pollen viability by iodine staining.
   1. Pick mature rice spikelets before the flower anthesis, remove the palea and lemma to release the anthers.
   2. Take 6 anthers and place them on a glass slide. Add 1 drop of distilled water, crush the anther well with tweezers to release the pollen grains, and then add 2–3 drops of I₂-KI solution. Cover with the coverslip.
   3. Observe under a low magnification microscope. Pollen grains dyed black show more vigorous viability, no color or yellow-brown dyed are stunted or degenerated.
7. Perform a semi-thin section of rice anther
   1. Fix the rice flowers from different developmental stages into an FAA solution. Vacuum the materials at 4 °C (generally 15 min) to allow the fixative to penetrate to the tissues until the material sinks to the bottom of the collection bottle.
   2. Replace with a new FAA solution the next day. Once the material sinks to the bottom, replace with 70% ethanol and store at 4 °C for long-term use.
   3. Dehydrate the materials with different gradients of ethanol (70%, 80%, 95% each time for 30 min, 100% ethanol for 2 h, 100% ethanol containing a little of Safranin dye for 2 h).
      NOTE: Add a little of Safranin dye into the second 100% ethanol to color the anthers for easier sectioning afterwards.
   4. Perform embedding by following the manufacturer’s instruction (Table of Materials). Then, bake in an oven at 60 °C for 48 h before sectioning.
   5. Section the sample to a thickness of 2 μm using a microtome. Add a drop of water on the glass slide. Then, pick up the thin sections containing anther blocks by forceps and put them onto the surface of the water drop on the slides.
   6. Place the slides on the water bath at 50 °C to completely spread the sections to let it firmly adhere to the slide.
   7. Use 0.5% toluidine blue solution stain the slides for 30 min. Then, rinse with water and dry in the fume hood. Seal with neutral tree glue. Gently place a coverslip on the slide and dry in the fume hood.
   8. Observe and photograph the sample under a microscope.

Wyniki

Demonstrated here is the use of gene editing technology to create a male sterile line for future research by Agrobacterium-mediated genetic transformation in rice. To create the male sterile line of osabcg15, CRISPR-CAS9-mediated mutagenesis was used for binary vector construction. The sgRNA was driven by the OsU3 promoter, whereas the expression cassette of hSpCas9 was driven by the double 35S promoter, and the middle vector was assembled in a single binary vector pCAMBIA1300 designed for ...

Dyskusje

Artificial genic male sterile mutants are traditionally generated by random physical, chemical, or biological mutagenesis. Although these are powerful techniques, their random nature fails to capitalize on the vast amount of modern genomic knowledge that has the potential to deliver tailored improvements in molecular breeding³². The CRISPR-Cas9 system has been widely used in plants due to its simple and affordable means to manipulate and edit DNA^29,

Materiały

Name	Company	Catalog Number	Comments
1-Naphthaleneacetic acid	Sigma-Aldrich	N0640
2，4-Dichlorophenoxyacetic Acid	Sigma-Aldrich	D7299
6-Benzylaminopurine (6-BA)	Sigma-Aldrich	B3408
Acetosyringone	Sigma-Aldrich	D134406
Agar	Sinopharm Chemical Reagent Co., Ltd	10000561
Ammonium sulfate	Sinopharm Chemical Reagent Co., Ltd	10002918
Aneurine hydrochloride	Sigma-Aldrich	T4625
Anhydrous ethanol	Sinopharm Chemical Reagent Co., Ltd	10009218
Bacteriological peptone	Sangon Biotech	A100636
Beef extract	Sangon Biotech	A600114
Boric acid	Sinopharm Chemical Reagent Co., Ltd	10004808
Calcium chloride dihydrate	Sinopharm Chemical Reagent Co., Ltd	20011160
Casein acid hydrolysate	Beijing XMJ Scientific Co., Ltd	C184
Cobalt(Ⅱ) chloride hexahydrate	Sinopharm Chemical Reagent Co., Ltd	10007216
Copper(Ⅱ) sulfate pentahydrate	Sinopharm Chemical Reagent Co., Ltd	10008218
D(+)-Glucose anhydrous	Sinopharm Chemical Reagent Co., Ltd	63005518
D-sorbitol	Sinopharm Chemical Reagent Co., Ltd	63011037
EDTA, Disodium Salt, Dihydrate	Sigma-Aldrich	E5134
EOS Digital SLR and Compact System Cameras	Canon	EOS 700D
Formaldehyde	Sinopharm Chemical Reagent Co., Ltd	10010018
Fully Automated Rotary Microtome	Leica Biosystems	Leica RM 2265
Glacial acetic acid	Sinopharm Chemical Reagent Co., Ltd	10000208
Glycine	Sinopharm Chemical Reagent Co., Ltd	62011516
Hygromycin	Beijing XMJ Scientific Co., Ltd	H370
Inositol	Sinopharm Chemical Reagent Co., Ltd	63007738
Iodine	Sinopharm Chemical Reagent Co., Ltd	10011517
Iron(Ⅱ) sulfate heptahydrate	Sinopharm Chemical Reagent Co., Ltd	10012116
Kanamycine	Beijing XMJ Scientific Co., Ltd	K378
Kinetin	Sigma-Aldrich	K0753
L-Arginine	Sinopharm Chemical Reagent Co., Ltd	62004034
L-Aspartic acid	Sinopharm Chemical Reagent Co., Ltd	62004736
L-Glutamine	Beijing XMJ Scientific Co., Ltd	G229
L-proline	Beijing XMJ Scientific Co., Ltd	P698
Magnesium sulfate heptahydrate	Sinopharm Chemical Reagent Co., Ltd	10013018
Manganese sulfate monohydrate	Sinopharm Chemical Reagent Co., Ltd	10013418
Microscopes	NIKON	Eclipse 80i
MS	Phytotech	M519
Nicotinic acid	Sigma-Aldrich	N0765
Phytagel	Sigma-Aldrich	P8169
Potassium chloride	Sinopharm Chemical Reagent Co., Ltd	10016308
Potassium dihydrogen phosphate	Sinopharm Chemical Reagent Co., Ltd	10017608
Potassium iodide	Sinopharm Chemical Reagent Co., Ltd	10017160
Potassium nitrate	Sinopharm Chemical Reagent Co., Ltd	1001721933
Pyridoxine Hydrochloride (B6)	Sigma-Aldrich	47862
Rifampicin	Beijing XMJ Scientific Co., Ltd	R501
Sodium hydroxide	Sinopharm Chemical Reagent Co., Ltd	10019718
Sodium molybdate dihydrate	Sinopharm Chemical Reagent Co., Ltd	10019816
Stereo microscopes	Leica Microsystems	Leica M205 A
Sucrose	Sinopharm Chemical Reagent Co., Ltd	10021418
Technovit embedding Kits 7100	Heraeus Teknovi, Germany	14653
Timentin	Beijing XMJ Scientific Co., Ltd	T869
Toluidine Blue O	Sigma-Aldrich	T3260
Water bath for paraffin sections	Leica Biosystems	Leica HI1210
Yeast extract	Sangon Biotech	A515245
Zinc sulfate heptahydrate	Sinopharm Chemical Reagent Co., Ltd	10024018