Chemical Conjugation of a Purified DEC-205-Directed Antibody with Full-Length Protein for Targeting Mouse Dendritic Cells In Vitro and In Vivo

Podsumowanie

We describe a protocol for the chemical conjugation of the model antigen ovalbumin to an endocytosis receptor-specific antibody for in vivo dendritic cell targeting. The protocol includes purification of the antibody, chemical conjugation of the antigen, as well as purification of the conjugate and the verification of efficient conjugation.

Streszczenie

Targeted antigen delivery to cross-presenting dendritic cells (DC) in vivo efficiently induces T effector cell responses and displays a valuable approach in vaccine design. Antigen is delivered to DC via antibodies specific for endocytosis receptors such as DEC-205 that induce uptake, processing, and MHC class I- and II-presentation.

Efficient and reliable conjugation of the desired antigen to a suitable antibody is a critical step in DC targeting and among other factors depends on the format of the antigen. Chemical conjugation of full-length protein to purified antibodies is one possible strategy. In the past, we have successfully established cross-linking of the model antigen ovalbumin (OVA) and a DEC-205-specific IgG2a antibody (αDEC-205) for in vivo DC targeting studies in mice. The first step of the protocol is the purification of the antibody from the supernatant of the NLDC (non-lymphoid dendritic cells)-145 hybridoma by affinity chromatography. The purified antibody is activated for chemical conjugation by sulfo-SMCC (sulfosuccinimidyl 4-[N-maleimidomethyl] cyclohexane-1-carboxylate) while at the same time the sulfhydryl-groups of the OVA protein are exposed through incubation with TCEP-HCl (tris (2-carboxyethyl) phosphine hydrochloride). Excess TCEP-HCl and sulfo-SMCC are removed and the antigen is mixed with the activated antibody for overnight coupling. The resulting αDEC-205/OVA conjugate is concentrated and freed from unbound OVA. Successful conjugation of OVA to αDEC-205 is verified by western blot analysis and enzyme-linked immunosorbent assay (ELISA).

We have successfully used chemically crosslinked αDEC-205/OVA to induce cytotoxic T cell responses in the liver and to compare different adjuvants for their potential in inducing humoral and cellular immunity following in vivo targeting of DEC-205⁺ DC. Beyond that, such chemically coupled antibody/antigen conjugates offer valuable tools for the efficient induction of vaccine responses to tumor antigens and have been proven to be superior to classical immunization approaches regarding the prevention and therapy of various types of tumors.

Wprowadzenie

Dendritic cells (DC) are central players of the immune system. They are a diverse group of cells specialized in antigen-presentation and their major function is to bridge innate and adaptive immunity^1,2. Importantly, DC not only play an important role in efficient and specific pathogen-directed responses but are also involved in many aspects of antitumor immunity^1,3.

Due to their exclusive role in host immunity, DC came into focus as target cells for vaccination⁴. One approach is to target antigens to DC in vivo to induce antigen-specific immune responses and over the last years, a large number of studies have been dedicated to defining suitable receptors and targeting strategies^1,4. One example is the C-type lectin receptor DEC-205, which can be targeted by DEC-205-specific antibodies to induce endocytosis. Importantly, DEC-205 targeting in the combination with suitable adjuvants has been shown to efficiently induce long-lived and protective CD4⁺ and CD8⁺ T cells, as well as antibody responses, also against tumor antigens^3,5,6,7,8,9.

There are a number of studies showing conjugated antigens targeted to DC to be superior to free un-conjugated antigen^3,5,10,11,12. This makes the conjugation of the antigen to the respective DC targeting moiety a central step in DC targeting approaches. In the case of DC targeting via antibodies or antibody fragments, antigens can be either chemically or genetically linked and either strategy provides its own (dis)advantages¹. On the one hand, in genetically engineered antibody-antigen constructs there is a control over the antigen dose as well as the location providing superior comparability between lots¹. At the same time however, chemical conjugation needs less preparation and provides more flexibility especially when attempting to test and compare different antigens and/or vaccination strategies in experimental and pre-clinical models.

Here, we present a protocol for the efficient and reliable chemical conjugation of ovalbumin (OVA) as a model protein antigen to a DEC-205-specific IgG2a antibody (αDEC-205) suitable for in vivo DC targeting in mice. First, αDEC-205 is purified from NLDC-145 hybridoma cells¹³. For chemical conjugation, the heterobifunctional crosslinker sulfosuccinimidyl 4-[N-maleimidomethyl] cyclohexane-1-carboxylate (sulfo-SMCC), which contains NHS (N-hydroxysuccinimide) ester and maleimide groups, is used, allowing covalent conjugation of amine- and sulfhydryl-containing molecules. Specifically, the primary amines of the antibody initially react with sulfo-SMCC and the resulting maleimide-activated αDEC-205 then reacts with the sulfhydryl-containing OVA protein reduced through TCEP-HCl (Tris(2-carboxyethyl) phosphine hydrochloride). The final product is chemically conjugated αDEC-205/OVA (Figure 1). Beyond chemical conjugation itself, our protocol describes removal of excess OVA from the conjugate as well as the verification of successful conjugation through western blot analysis and a specific enzyme-linked immunosorbent assay. We have successfully employed this approach in the past to chemically conjugate OVA and other proteins or immunogenic peptides to αDEC-205. We demonstrate efficient binding to CD11c⁺ cells in vitro as well as the efficient induction of cellular and humoral immunity in vivo.

Certainly, there are drawbacks to this method such as in lot-to-lot comparability and in the exact dosing of the antigen within the final conjugate. Nevertheless, chemical conjugation provides experimental flexibility in the choice of the antibody and the protein antigen as compared to genetically engineered constructs. Therefore, we believe this approach is especially valuable in evaluating different antigens for their efficiency in DC targeting in pre-clinical mouse models, importantly also in the context of specific antitumor immune responses.

Protokół

All of the described animal experiments were approved by the local government agency (Niedersächsisches Landesamt für Verbraucherschutz und Lebensmittelsicherheit; file number 33.12-42502-04-10/0108) and were performed according to the national and institutional guidelines.

1. Production of αDEC-205 from the hybridoma cell line NLDC-145

1. For antibody production, thaw cryopreserved NLDC-145 cells producing αDEC-205 at 37 °C in a water bath. Expand the cells at 37 °C and 5% CO₂. Two 75 cm² bottles will be needed to proceed to antibody production. Cell culture procedures should be performed in a safety cabinet to ensure safe working conditions and prevent contamination of the cultures.
   1. Resuspend 1 mL of thawed cells (1 x 10⁶ - 5 x 10⁶ cells/mL) in 9 mL of ISF-1 medium supplemented with 1% penicillin/streptomycin (pre-warmed to 37 °C) into a cell culture flask (25 cm²). Place the flask horizontally in a cell culture incubator at 37 °C, 5% CO₂.
   2. Culture the cells at 37 °C and 5% CO₂, until 70% confluence. This should normally be achieved after 24 - 48 h.
   3. Once the cells are 70% confluent, transfer the complete NLDC-145 cell suspension (10 mL) into a 15 mL conical centrifuge tube using a pipette controller with a pipette in a volume range from 1-10 mL. Pellet the cells by centrifugation at 250 x g for 10 min at room temperature.
   4. Pre-warm ISF-1 medium to 37 °C in a water bath and resuspend the pellet in 12 mL of ISF-1 medium supplemented with 1% penicillin/streptomycin. Transfer the resuspended cell suspension into a fresh cell culture flask (75 cm²).
   5. Culture and expand the cells in ISF-1 medium supplemented with 1% penicillin/streptomycin at 37 °C and 5% CO₂, until 70% confluent and 99% viable. This should normally be achieved after 48 - 72 h.
   6. Split the cells to two 75 cm² flasks. To do this first flush the cell culture flask bottom/culture surface with the cell suspension to remove all NLDC-145 cells from the surface. Transfer 6 mL of the NLDC-145 cell suspension each into one of two fresh 75 cm² bottles and add pre-warmed ISF-1 medium supplemented with 1% penicillin/streptomycin up to 12 mL.
      NOTE: Do not renew the cell culture medium as the NLDC-145 cells will have conditioned the medium. Transfer the cells together with their medium and fill the culture up to the desired volume with fresh medium. This is crucial for viability and maximum antibody production by the NLDC-145 cells.
   7. Expand the cell cultures at 37 °C and 5% CO₂, until about 70% confluent which is generally achieved after 48 - 72 h.
   8. Once the cells are 70% confluent, transfer 10 mL of the expanded NLDC-145 cell suspension from each of the 75 cm² bottles into one PETG (polyethylene terephthalate glycol) roller bottle (1,050 cm²). For this, flush the cell culture flask bottom/culture surface with the cell suspension to remove all cells from the surface using a pipette controller and 10 mL pipette.
   9. Add 140 mL of ISF-1 medium supplemented with 1% penicillin/streptomycin (pre-warmed to 37 °C) directly out of the medium bottle to each of the NLDC-145 containing roller bottles filling them up to the 150 mL mark.
      ​NOTE: See note in step 1.1.6.
   10. Culture the roller bottles at 37 °C, 5% CO₂ and 25 rounds/min for three days.
   11. Add 150 mL of ISF-1 medium supplemented with 1% penicillin/streptomycin (pre-warmed to 37 °C) to each of the NLDC-145 containing roller bottles filling them up to the 300 mL mark.
   12. Culture the roller bottles now containing 300 mL culture each at 37 °C, 5% CO₂ and 25 rounds/min for another three days.
   13. Add another 100 mL of ISF-1 medium supplemented with 1% penicillin/streptomycin (pre-warmed to 37 °C) to each of the NLDC-145 containing roller bottles, thereby filling them up to the 400 mL mark.
   14. Culture the roller bottles now containing 400 mL culture each at 37 °C, 5% CO₂ and 25 rounds/min for another seven days.
       NOTE: During this week, the culture gets very dense (up to 95% density) and viability decreases (down to as little as 50%), enabling maximum antibody release.
2. For the purification of αDEC-205 from the culture supernatant pour the NLDC-145 cell suspension (from both roller bottles) directly to 500 mL autoclaved centrifugation bottles.
   ​NOTE: A total volume of 800 mL of culture should be collected.
   1. Centrifuge the culture for 30 min at 8,600 x g and 4 °C to remove cells and debris.
   2. Collect the supernatants, discarding the pellets and pooling the supernatants in a sterile reagent bottle.
      ​NOTE: Purification of αDEC-205 can be commenced immediately (step 2.) or the supernatant can be stored short-term at 4 °C.

2. Purification of the αDEC-205 antibody from the NLDC-145 cell supernatant

NOTE: From the NLDC-145 cell supernatant, αDEC-205 is purified using a protein G Sepharose column (reusable). The column dimensions are 15 mm x 74 mm and 5 mL protein G Sepharose are packed per column.

1. For preparation and washing of the protein G Sepharose column, put an airtight rubber plug on the upper opening of the protein G Sepharose column. Puncture the rubber plug with two sterile cannulas (20 G x 1 1/2", 0.90 x 40 mm).
   1. Connect a 10 mL syringe to one of the two cannulas and a flexible silicon tube (approximately 100 cm long, 2.5 - 3 mm diameter) with a tubing connector to the second cannula.
      ​NOTE: The syringe/rubber plug construction is reusable and provides a vacuum resulting in a continuous flow of the large volume of culture supernatant to the protein G Sepharose column. To this end, slightly pull back the plunger of the syringe to ensure continuous fluid flow in the following steps.
   2. Wash the column with 50 mL of 0.1 M glacial acetic acid (pH 2) to remove potentially remaining antibody from any previous antibody purification. Put the end of the silicon tube in the 0.1 M glacial acetic acid (pH 2) filled reagent bottle. As a result of the induced vacuum, 50 mL of the 0.1 M glacial acetic acid (pH 2) dropwise run through the protein G Sepharose column.
      ​NOTE: 0.1 M glacial acetic acid (pH 2) should be stored in a reagent bottle or freshly filled in a beaker.
   3. Wash the column with 100-200 mL phosphate-buffered saline (PBS). Put the end of the silicon tube into a PBS filled reagent bottle or beaker. Let 100-200 mL PBS run dropwise through the protein G Sepharose column.
2. For antibody purification from the NLDC-145 supernatant, load 800 mL of the NLDC-145 supernatant (obtained from step 1.2.2.) onto the column. Put the end of the silicon tube into the NLDC-145 supernatant filled reagent bottle. Let 800 mL NLDC-145 supernatant run dropwise through the column.
   1. Wash the column with 500 mL of PBS. Put the end of the silicon tube in a PBS filled reagent bottle or beaker. Let 500 mL PBS run dropwise through the column.
   2. For elution, use 20 1.5 mL tubes and pipette 100 µL of 1.5 M Tris-HCl (pH 8.8) into each 1.5 mL tube. Remove the rubber plug from the column and pipette 1 mL of 0.1 M glycine (pH 3) to the upper chamber of the protein G Sepharose column to elute the antibody from the column. Collect the flow-through directly as eluate in one of the prepared 1.5 mL tubes.
   3. Repeat the elution step (2.2.2.) for all 20 tubes (1.5 mL).
   4. Determine the optical density of all elution fractions at 280 nm (OD₂₈₀) using a spectrophotometer in order to identify the antibody-containing fractions.
      ​NOTE: Use the first elution fraction as blank.
   5. Pool all fractions with an OD₂₈₀ greater than 0.5 (approximately 10 fractions).
   6. Store the protein G Sepharose column filled with 20% ethanol at 4 °C.
3. Dialyze the pooled elutions against 1000 mL PBS (in a 2000 mL beaker) at 4 °C overnight using dialysis tubing with a molecular weight cut off (MWCO) of 12 - 14 kDa.
   1. Cut the dialysis tubing into pieces of 20 cm. Boil the dialysis tubing in 500-800 mL of 10 mM EDTA (pH 7.5) for 30 min in a beaker using a hot plate to remove contamination. Discard the 10 mM EDTA (pH 7.5) solution and boil the dialysis tubing in deionized water for 10 min.
      ​NOTE: The dialysis tubing can be used directly or stored in 0.01% sodium azide (NaN₃)/H₂O solution at 4 °C until next usage.
   2. Close the bottom of the dialysis tubing with an appropriate dialysis tubing closure/single-piece, hinged clamp and carefully pipette the antibody elution into the dialysis tubing. Close the top of the dialysis tubing with a second clamp.
   3. Fix the upper clamp of the dialysis tubing to a floating stand, put it together with a magnetic stir bar into the PBS filled beaker and place the beaker on a magnetic stirrer.
   4. Dialyze overnight stirring at 4 °C.
4. To increase the concentration of αDEC-205, load the complete dialysate to a centrifugal concentrator with 10 kDa MWCO. Open one clamp of the tubing and carefully pipette the complete dialysate out of the dialysis tubing into the centrifugal concentrator (10 kDa MWCO).
   ​NOTE: Do not touch the concentrator bottom with the pipette tip.
   1. Centrifuge for 30 min at 693 x g (2,000 rpm) and 4 °C.
   2. Load the centrifugal concentrator with 10 mL of PBS and centrifuge at 693 x g (2,000 rpm) and 4 °C until the final volume of antibody solution left is 1-1.5 mL.
      NOTE: If necessary, repeat the centrifugation step of 2.4.1. to adjust to the desired amount.
   3. Using a spectrophotometer, determine the optical density of the concentrated αDEC-205 solution at 280 nm (OD₂₈₀). Use PBS as blank.
   4. Calculate the concentration of αDEC-205 using the following formula:
      ​concentration [mg/mL] = OD₂₈₀/1.4.
   5. Filter the αDEC-205 solution using a 0.22 µm syringe filter unit.
      ​NOTE: Purification of αDEC-205 from the NLDC-145 hybridoma cell supernatant can also be achieved by FPLC (fast protein liquid chromatography). Purified αDEC-205 can be stored at 4 °C or at -18 °C for long-term storage.

3. Chemical conjugation of OVA to αDEC-205

NOTE: A ratio of 0.5 mg OVA protein to 2.5 mg αDEC-205 (1:5) is required for optimal chemical conjugation. However, this ratio can vary for other proteins and antibodies and needs to be optimized for alternative conjugates. Reduction of the disulfide bonds of the OVA protein is performed through incubation with 30 mM TCEP-HCl, which exposes the sulfhydryl-groups for chemical conjugation to αDEC-205 and 240 µl of TCEP-HCl are needed in step 3.2. Both steps, TCEP-induced reduction of OVA (step 3.1.) and sulfo-SMCC activation of αDEC-205 (step 3.2.), should preferably be performed in parallel.

1. Freshly prepare a 125 mM TCEP-HCl solution (pH 7.0). Weigh out the desired amount of TCEP-HCl and dissolve the TCEP-HCl in 0.9 M Tris base (pH 8.8). Use pH indicator strips to test the pH of the 125 mM TCEP-HCl solution (which should be neutral) and adjust the pH with Tris base (pH 8.8).
   1. Pipette 200 µL OVA protein solution (containing 0.5 mg OVA) into a 1.5 mL sterile tube. Add 240 µl 125 mM TCEP-HCl and 560 µL of sterile ultrapure water to the OVA protein using a pipette to a final concentration of 0.5 mg/mL OVA protein and 30 mM TCEP-HCl (OVA/TCEP-HCl).
      ​NOTE: 2.5 mg EndoGrade OVA (lyophilized) is dissolved in 1 mL PBS resulting in a 2.5 mg/mL OVA solution.
   2. Incubate the resulting OVA/TCEP-HCl at room temperature for 1.5 h.
      NOTE: Do not extend this incubation step.
2. To activate αDEC-205 for conjugation, dissolve 2 mg sulfo-SMCC in 100 µL of ultrapure water.
   ​NOTE: Sulfo-SMCC is susceptible to hydrolysis. Therefore, larger amounts of undissolved sulfo-SMCC should be handled rapidly or available 2 mg aliquots should be used.
   1. Dilute αDEC-205 in PBS so that 2.5 mg are contained in 900 µL.
   2. Mix 2.5 mg of αDEC-205 (900 µL volume; obtained from step 3.2.1.) and 100 µL of sulfo-SMCC (obtained from step 3.2.) in a 1.5 mL tube, resulting in a total volume of 1 mL.
   3. Incubate the αDEC-205/sulfo-SMCC solution for 30 min at 37 °C and 550 rpm in a heating block.
3. Following these incubations, excess sulfo-SMCC and TCEP-HCl are immediately removed from the solutions using desalting columns (MWCO 7 kDa; 5 mL column volume).
   1. Twist off the columns (MWCO 7 kDa) bottom closure, loosen the cap and place the column into a 15 mL conical tube.
   2. Centrifuge for 2 min at 1,000 x g at room temperature to remove the liquid.
   3. Place the column in a fresh tube and remove the cap. Slowly load the antibody/sulfo-SMCC and the OVA/TCEP-HCl, respectively, to the center of the compact resin bed of one column each.
   4. Centrifuge for 2 min at 1,000 x g at room temperature.
   5. Discard the columns after use. The solutions containing antibody and OVA primed for conjugation are in the tubes.
   6. Immediately mix both solutions by pipetting for conjugation of αDEC-205 and OVA.
   7. Incubate the resulting αDEC-205 and OVA mixture overnight at 4°C.
4. Following conjugation, excess unbound OVA is removed from the solution and the coupled αDEC-205/OVA is concentrated using a centrifugal protein concentrator (MWCO 150 kDa).
   1. Pre-rinse the centrifugal protein concentrator (MWCO 150 kDa) by pipetting 12 mL of PBS on the column and centrifuging for 2 min at 2,000 x g at room temperature.
      NOTE: If necessary, repeat the centrifugation step (3.4.1.) until a volume of about 5 mL has passed through the column.
   2. Before loading the αDEC-205/OVA onto the centrifugal protein concentrator, save a 20 µL sample of the un-concentrated αDEC-205/OVA for western blot analysis. Store this aliquot at 4 °C until analysis.
   3. Load the αDEC-205/OVA onto the centrifugal protein concentrator by pipetting.
      ​NOTE: Avoid any contact with the bed of the upper chamber of the centrifugal concentrator.
   4. Fill the concentrator to 15 mL with PBS and centrifuge the concentrator for 5 min at 2,000 x g at room temperature.
   5. Save a sample of the flow-through (flow-through I) for western blot analysis and discard remaining flow-through.
   6. Fill the concentrator to 10 mL with PBS and centrifuge the concentrator for at least 8 min at 2,000 x g at room temperature.
   7. Save a sample for the second flow-through (flow-through II) for western blot analysis and discard the remaining flow-through.
   8. Once the desired enrichment is achieved (around 1.5 mL of the αDEC-205/OVA solution should be left in the upper chamber) gently aspirate the concentrated sample.
      NOTE: If too much fluid is left in the upper chamber, centrifugation can be repeated but should be kept as short as possible.
5. Determine the protein concentration of the resulting αDEC-205/OVA using a microvolume spectrophotometer. Use PBS as blank.
6. Filter the αDEC-205/OVA using a 0.22 µm syringe filter unit.
   ​NOTE: For later analysis and in vivo experiments, αDEC-205/OVA can be stored at 4 °C or -18 °C.

4. Verification of the chemical conjugation by western blot

NOTE: For verification of successful chemical conjugation, western blot analysis detecting either OVA (4.2) or αDEC-205 (4.10) is performed. Detection of OVA (4.2.) or αDEC-205 (4.10.) should be performed in parallel. An orbital platform shaker should preferably be used for all incubation steps of the western blot membranes to allow uniform distribution of the respective solutions.

1. Prepare standard 10% SDS (sodium dodecyl sulfate) gels for SDS-PAGE (sodium dodecyl sulfate polyacrylamide gel electrophoresis).
2. Prepare the samples for SDS-PAGE to detect conjugated and un-conjugated OVA and run gel electrophoresis.
   1. Dilute different amounts of coupled αDEC-205/OVA (e.g., 200, 100 and 50 ng), of pure OVA (e.g., 80, 70, 60, 50, 40 and 30 ng), an aliquot of un-conjugated αDEC-205 (e.g., 100 and 50 ng), a sample of un-concentrated αDEC-205/OVA conjugate from step 3.4.2. (e.g., 125 ng) and an aliquot of flow-through I and II (steps 3.4.5. and 3.4.7., respectively; optional) in 4 x non-reducing SDS sample buffer.
      ​NOTE: Different concentrations of conjugate and protein are loaded to ensure that both free OVA as well the conjugate can be detected on the same blot.
   2. Denature the samples at 65 °C for 10 min and 550 rpm in a heating block.
3. Load the samples and a protein standard to an SDS gel and run SDS-PAGE.
4. Perform standard blotting of the proteins from the SDS gel to a methanol-activated PVDF (polyvinylidene difluoride) membrane (75 min, 125 mA).
5. Following blotting, put the membrane in an appropriate dish and block the membrane by pipetting 25 mL of 4% meal replacement shake powder/TBS-T (Tris-buffered saline/0.1% Tween 20) blocking buffer into the dish containing the membrane.
   1. Incubate the membrane in the blocking solution for 60 min at room temperature or overnight at 4 °C.
6. Discard the blocking solution and stain the membrane with the rabbit αOVA primary antibody in 2% meal replacement shake powder/TBS-T antibody buffer (dilution 1:3,000) by pipetting 15 mL of primary antibody solution to the membrane in the dish.
   1. Incubate the membrane for 45 min at room temperature or overnight at 4 °C (use the platform shaker).
7. Discard the antibody solution and wash the membrane in the dish (use the platform shaker).
   1. Add 25 mL of TBS-T to the membrane and incubate for 5 min. Discard the solution.
   2. Add 25 mL of TBS-T/0.5 M NaCl to the membrane and incubate for 5 min. Discard the solution.
   3. Add 25 mL of TBS-T/0.5% Triton X-100 to the membrane and incubate for 5 min. Discard the solution.
   4. Add 25 mL of TBS-T to the membrane and incubate for 5 min. Discard the solution.
8. Stain the membrane with the goat αrabbit-IgG-HRPO (horse radish peroxidase) secondary antibody in 2% meal replacement shake powder/TBS-T antibody buffer (dilution 1:2,000) by pipetting 15 mL of secondary antibody solution to the membrane in the dish.
   1. Incubate the membrane for 45 min at room temperature or overnight at 4 °C (on the platform shaker).
9. Wash the membrane again as described in step 4.7.1.- 4.7.4. using the platform shaker. For this membrane, next carry on with step 4.16. (the following steps 4.10.- 4.15. (detection of αDEC-205) can be performed parallel to steps 4.2.- 4.9.).
10. Prepare the samples for the detection of αDEC-205 for SDS-PAGE and run the gel electrophoresis.
    1. Dilute different amounts of αDEC-205/OVA (e.g., 200, 100 and 50 ng), of the un-conjugated αDEC-205 (e.g., 250, 125, 62.5 ng), of pure OVA (e.g., 80 and 70 ng), a sample of un-concentrated αDEC-205/OVA from step 3.4.2. (e.g., 125 ng) and an aliquot of flow-through I and II (steps 3.4.5. and 3.4.7., respectively; optional) in 4 x non-reducing SDS sample buffer.
    2. Denature the samples at 65 °C for 10 min and 550 rpm in a heating block.
11. Load the samples and a protein standard to an SDS gel and run gel electrophoresis.
12. Perform standard blotting of the proteins from the SDS gel to a methanol activated PVDF (polyvinylidene difluoride) membrane (75 min, 125 mA).
13. Following blotting, put the membrane in an appropriate dish and block the membrane by pipetting 25 mL of 10% blocking buffer (milk powder/TBS-T) into the dish containing the membrane.
    ​NOTE: The blocking solutions differ between αDEC-205 and OVA detection (step 4.5.).
    1. Incubate the membrane in the blocking solution for 60 min at room temperature or overnight at 4 °C (using the platform shaker).
14. Discard the blocking solution and stain the membrane with the goat αrat-IgG(H+L)-HRPO antibody in 5% milk powder/TBS-T antibody buffer (dilution 1:5,000) by pipetting 15 mL of antibody solution to the membrane in the dish.
    ​NOTE: The antibody buffers differ between αDEC-205 detection and OVA detection (steps 4.6./ 4.8.).
    1. Incubate the membrane for 45 min at room temperature or overnight at 4 °C (using the platform shaker).
15. Wash the membrane thoroughly in the dish as described in steps 4.7.1.- 4.7.4. (use the platform shaker).
16. Use an appropriate detection reagent to develop the HRP signal and detect the chemiluminescence in a dark room using x-ray film or via an imaging system.

5. Verification of the chemical conjugation by ELISA

1. Perform ELISA for further verification of successful chemical conjugation resulting in αDEC-205/OVA.
2. Coat an appropriate 96-well ELISA plate with 100 µL/well of 3 ng/µL rabbit αOVA antibody in coating buffer (0.1 M sodium bicarbonate (NaHCO₃) pH 9.6 diluted in H₂O).
   1. Incubate the plate overnight at 4 °C.
3. Following coating, wash the plate three times with PBS, e.g., using an ELISA washer.
4. Block the plate by pipetting 200 µL of blocking buffer (10% FCS in PBS) in each well of the plate and incubate the plate for 30 min at room temperature.
5. Serially dilute αDEC-205/OVA (obtained from step 3.6.) 1:2 in blocking buffer (10% FCS in PBS) to obtain dilutions ranging from 6 µg/mL down to 93.8 ng/mL αDEC-205/OVA and add 100 µL/well of these decreasing amounts of αDEC-205/OVA to the wells.
   1. Incubate the plate for 1 h at room temperature.
6. Wash the plate three times with PBS, e.g., using an ELISA washer.
7. Add 100 µL of the goat αrat-IgG+IgM(H+L)-HRPO antibody (diluted to 1:2,000 in blocking buffer (10% FCS in PBS)) to each well of the plate.
   1. Incubate for 1 h at room temperature.
8. Wash the plate three times using PBS, e.g. using an ELISA washer.
9. Add 50 µL of HRPO-substrate to the wells. When observing a clear color reaction, stop the reaction through addition of 150 µl stopping solution (1M H₂SO₄) per well.
10. After 5 min, read absorption at 450 nm using an ELISA reader.

Wyniki

Chemical conjugation of αDEC-205 to OVA protein using this protocol will typically allow efficient generation of αDEC-205/OVA for in vivo DC targeting approaches. There are different strategies to verify the technique itself and to test the functionality of the yielded conjugate. Western blot analysis and ELISA are used to verify successful conjugation and at the same time detect potentially left free OVA (Figure 2). In vitro bindi...

Dyskusje

Chemical conjugation of an endocytosis receptor-specific antibody and a protein antigen provides an efficient and, importantly, also flexible approach for in vivo DC targeting in pre-clinical mouse models. With our protocol we provide an efficient approach for the successful conjugation of the model antigen OVA to a DEC-205-specific IgG antibody.

In our protocol, αDEC-205 is purified from a hybridoma cellline and in the past, we have purified the antibody using protein G sepharos...

Materiały

Name	Company	Catalog Number	Comments
antibody buffer 2 %			2 % (w/v) Slim-Fast Chocolate powder in TBS-T
antibody buffer 5 %			5 % milk powder (w/v) in TBS-T
blocking buffer (ELISA)			10 % FBS in PBS
blocking buffer 4 %			4 % (w/v) Slim-Fast Chocolate powder in TBS-T
blocking buffer 10 %			10 % milk powder (w/v) in TBS-T
cell culture flask T25	Greiner Bio-One	690175	we use standard CELLSTAR filter cap cell culture flasks; alternatively use suspension culture flask (690195 )
cell culture flask T75	Greiner Bio-One	658175	we use standard CELLSTAR  filter cap cell culture flasks; alternatively use suspension culture flask (658195)
cell culture flask T175	Greiner Bio-One	661175	we use standard CELLSTAR filter cap cell culture flasks; alternatively use suspension culture flask (661195)
centrifugal concentrator MWCO 10 kDa	Sartorius	VS2001	Vivaspin 20 centrifugal concentrator
centrifugal protein concentrator MWCO 100 kDa, 5 - 20 ml	Thermo Fisher Scientific	88532	Pierce Protein Concentrator, PES 5 -20 ml; we use the Pierce Concentrator 150K MWCO 20mL (catalog number 89921), which is however no longer available
centrifuge bottles	Nalgene	525-2314	PPCO (polypropylene copolymer) with PP (polypropylene) screw closure, 500 ml; obtained from VWR, Germany
coating buffer (ELISA)			0.1 M sodium bicarbonate (NaHCO3) in H2O (pH 9.6)
desalting columns MWCO 7 kDa	Thermo Fisher Scientific	89891	Thermo Scientific Zeba Spin Desalting Columns, 7K MWCO, 5 mL
detection reagent ELISA (HRPO substrate)	Sigma-Aldrich/Merck	T8665-100ML	3,3′,5,5′-Tetramethylbenzidine (TMB) liquid substrate system
detection reagent western blot (HRPO substrate)	Roche/Merck	12 015 200 01	Lumi-Light Western Blotting Substrate (Roche)
dialysis tubing MWCO 12 - 14 kDa	SERVA Electrophoresis	44110	Visking dialysis tubing, 16 mm diameter
ELISA 96-well plate	Thermo Fisher Scientific	442404	MaxiSorp Nunc-Immuno Plate
fetal calf serum	PAN-BIOtech	P40-47500	FBS Good forte
ISF-1 medium	Biochrom/bioswisstec	F 9061-01
milk powder	Carl Roth	T145.2	powdered milk, blotting grade, low in fat; alternatively we have also used conventional skimmed milk powder from the supermarket
NLDC-145 hybridoma	ATCC	HB-290	if not already at hand, the hybridoma cells can be acquired from ATCC
non-reducing SDS sample buffer 4 x			for 12 ml: 4 ml of 10 % SDS, 600 µl 0.5 M Tris-HCl (ph 6.8), 3.3 ml sterile H2O, 4 ml glycerine, 100 µl of 5 % Bromphenol Blue
ovalbumin	Hyglos (via BioVendor)	321000	EndoGrade OVA ultrapure with <0.1 EU/mg
Penicillin/Streptomycin	Thermo Fisher Scientific	15140122	Gibco Penicillin/Streptomycin 10.000 U/ml; alternatively Gibco Penicillin/Streptomycin 5.000 U/ml (15070-063) can be used
PETG polyethylene terephthalate glycol cell culture roller bottles	Nunc In Vitro	734-2394	standard PDL-coated, vented (1.2X), 1050 cm², 100 - 500 ml volume; obtained from VWR, Germany
pH indicator strips	Merck	109535	pH indicator strips 0-14
polyclonal goat αrat-IgG(H+L)-HRPO (western blot)	Jackson ImmunoResearch	112-035-062	obtained from Dianova, Germany; used at 1:5000 for western blot
polyclonal goat αrat-IgG+IgM-HRPO antibody  (ELISA)	Jackson ImmunoResearch	112-035-068	obtained from Dianova, Germany; used at 1:2000 for ELISA
polyclonal goat αrabbit-IgG-HRPO (western blot)	Jackson ImmunoResearch	111-035-045	obtained from Dianova, Germany; used at 1:2000 for western blot
polyclonal rabbit αOVA (ELISA)	Abcam	ab181688	used at 3 ng/µl
polyclonal rabbit αOVA antibody (western blot)	OriGene	R1101	used at 1:3,000 for western blot
Protein G Sepharose column	Merck/Millipore	P3296	5 ml Protein G Sepharose, Fast Flow are packed onto an empty column PD-10 (Merck, GE 17-0435-01)
protein standard	Thermo Fisher Scientific	26616	PageRuler Prestained Protein ladder 10 - 180 kDa
PVDF (polyvinylidene difluoride) membrane	Merck/Millipore	IPVH00010	immobilon-P PVDF (polyvinylidene difluoride) membrane
rubber plug	Omnilab	5230217	DEUTSCH & NEUMANN rubber stoppers (lower Φ 17 mm; upper Φ 22 mm)
silicone tube	Omnilab	5430925	DEUTSCH & NEUMANN (inside Φ 1 mm; outer Φ 3 mm)
Slim-Fast			we have used regular Slim-Fast Chocolate freely available at the pharmacy as in this western blot approach it yielded better results than milk powder
stopping solution (ELISA)			1M H2SO4
sulfo-SMCC	Thermo Fisher Scientific	22322	Pierce Sulfo-SMCC Cross-Linker; alternatively use catalog number A39268 (10 x 2 mg)
syringe filter unit 0.22 µm	Merck/Millipore	SLGV033RS	Millex-GV Syringe Filter Unit, 0.22 µm, PVDF, 33 mm, gamma sterilized
syringe 10 ml	Omnilab		Disposable syringes Injekt® Solo B.Braun
Sterican® cannulas	B. Braun		Sterican® G 20 x 1 1/2""; 0.90 x 40 mm; yellow
TBS-T			Tris-buffered saline containing 0.1 % (v/v) Tween 20
TCEP-HCl	Thermo Fisher Scientific	A35349
tubing connector	Omnilab		Kleinfeld miniature tubing connectors for silicone tube